,
Réseau européen de revendeurs de machines de stockage
+49 (0) 2389 5299080
Service de recherche Vendre des machines d'occasion

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:
             Vue: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          1. machine-categorie:
          2. Metal Processing
          3. Sheet metal working - shaeres - bending

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending

          Coil Line

          used Sheet metal working / shaeres / bending Coil Line ARKU AH 3000/2/250/ST / RM 3025.4/2

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60174 · Coil Line

          ARKU - AH 3000/2/250/ST / RM 3025.4/2 - - 2004 -

          Technical details
          sheet width 0250 mm︱coil outside dia. 1800 mm︱weight max. in kg 2 x 3000 kg︱ 3,80 mm︱ 470 - 530 mm︱ 21 ︱ 30 mm︱ 4 ︱ 18,0 kW︱speed 20 m/min︱power capacity 18 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm
            sheet width 0250 mm
            coil outside dia. 1800 mm
            weight max. in kg 2 x 3000 kg
            3,80 mm
            470 - 530 mm
            21
            30 mm
            4
            18,0 kW
            speed 20 m/min
            power capacity 18 kW
            Description :
            Decoiler AH 3000/2/250/ST
            with continuously variable drive, hydraulic central spread,
            Automatic post-spreading system, hydraulic pressure device, hydraulic swivel,

            Straightening machine RM 3025.4/21
            with continuously variable drive, driven straightening rollers, manual
            Roller mill adjustment, quick-change device for the straightening rollers
            Belt loop control via ultrasound
            Material thickness / with material width 3.80 / 250 mm
            Material thickness / with material width 6.00 / 100 mm


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact

          Coiler

          used Sheet metal working / shaeres / bending Coiler ARKU AH500 / 2 / FU

          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland
          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0425 · Coiler

          ARKU - AH500 / 2 / FU - - 1993 -

          Technical details
          Coil weight 2 x 500 kg︱Material width 300 mm︱Coil exterior diameter 1200 mm︱Expansion range 350 - 610 mm︱Weight of machine approx. 2,2 t︱
            Coil weight 2 x 500 kg
            Material width 300 mm
            Coil exterior diameter 1200 mm
            Expansion range 350 - 610 mm
            Weight of machine approx. 2,2 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

          • Datasheet
          Request / Contact

          decoiler straightening machine

          used Sheet metal working / shaeres / bending decoiler straightening machine ARKU AH 3000/2/250/ST / RM 3025.4/2

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233015A · decoiler straightening machine

          ARKU - AH 3000/2/250/ST / RM 3025.4/2 - - 2004 - konventionell

          Technical details
          material width 250 mm︱coil weight 2 x 3,0 t︱material thickness 1,5 - 6,0 mm︱coil internal diameter 470 - 530 mm︱coil external diameter 1800 mm︱material cross-cut 6,0 bei BB100 / 3,8mm bei mm²︱no. of straightening rolls 21 ︱straightening roll diameter 30 mm︱number of draw-in rolls 4 ︱speed - 20 m/min︱power requirement 18,0 kW︱Weight 4,2 t︱Dimensions (WxDxH) 2,4 x 2,7 x 2,6 m︱Weight 2,40 kg︱dimensions (WxDxH) 2,0 x 2,1 x 2,2 m︱
          Decoiler AH 3000/2/250/ST with infinitely variable drive, hydraulic centralized expansion, hydraulic snubber roll, hydraulic pivoting Straightening machine RM 3025.4/21 with infinitely variable drive, driven straightening rolls, manual adjustment of the roller cassette, rapid changing device of the straightening rolls coil loop control via ultrasonic
            material width 250 mm
            coil weight 2 x 3,0 t
            material thickness 1,5 - 6,0 mm
            coil internal diameter 470 - 530 mm
            coil external diameter 1800 mm
            material cross-cut 6,0 bei BB100 / 3,8mm bei mm²
            no. of straightening rolls 21
            straightening roll diameter 30 mm
            number of draw-in rolls 4
            speed - 20 m/min
            power requirement 18,0 kW
            Weight 4,2 t
            Dimensions (WxDxH) 2,4 x 2,7 x 2,6 m
            Weight 2,40 kg
            dimensions (WxDxH) 2,0 x 2,1 x 2,2 m
            Description :
            Decoiler AH 3000/2/250/ST
            with infinitely variable drive, hydraulic centralized expansion, hydraulic snubber roll, hydraulic pivoting
            Straightening machine RM 3025.4/21
            with infinitely variable drive, driven straightening rolls, manual adjustment of the roller cassette, rapid changing device of the straightening rolls
            coil loop control via ultrasonic


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending decoiler straightening machine ARKU RM 5050.4/9 / AH 2000/2/M

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-123056 · decoiler straightening machine

          ARKU - RM 5050.4/9 / AH 2000/2/M - - 1986 - konventionell

          Technical details
          material width 500 mm︱coil weight 2 x 2,0 t︱material thickness 1,0 - 6,0 mm︱coil internal diameter 350 - 420 mm︱coil external diameter 1600 mm︱no. of straightening rolls 9 ︱straightening roll diameter 50 mm︱number of draw-in rolls 2 ︱speed 0 - 40 m/min︱material thickness at 500 mm material width 3,5 mm︱power requirement 17,5 kW︱Weight t︱Dimensions (WxDxH) 2,3 x 4,2 x 2,4 m︱
          - Straightening machine RM 5050.4/9 with infinitely variable drive, supporting rolls - Double decoiler AH 2000/2/M with auxiliary drive, manual centralized expansion, pneumatic snubber roll, interchangeable jaws to widen the inner diameter +130 mm machine is in running function in our warehouse
            material width 500 mm
            coil weight 2 x 2,0 t
            material thickness 1,0 - 6,0 mm
            coil internal diameter 350 - 420 mm
            coil external diameter 1600 mm
            no. of straightening rolls 9
            straightening roll diameter 50 mm
            number of draw-in rolls 2
            speed 0 - 40 m/min
            material thickness at 500 mm mat. 3,5 mm
            power requirement 17,5 kW
            Dimensions (WxDxH) 2,3 x 4,2 x 2,4 m
            Description :
            - Straightening machine RM 5050.4/9
            with infinitely variable drive, supporting rolls
            - Double decoiler AH 2000/2/M
            with auxiliary drive, manual centralized expansion, pneumatic snubber roll, interchangeable jaws to widen the inner diameter +130 mm
            machine is in running function in our warehouse


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact

          Decoilers for Coils

          used Sheet metal working / shaeres / bending Decoilers for Coils ARKU AH 3000-400-MSG-4Q

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7781 · Decoilers for Coils

          ARKU - AH 3000-400-MSG-4Q - - 1997 -

          Technical details
          sheet width - max. 0600 mm︱coil weight 3,00 t︱coil internal dia. 465 - 530 mm︱total power requirement kW︱weight of the machine ca. 2,45 t︱dimensions of the machine ca. 2,72 x 1,70 x 2,40 m︱
          material width (previously) 400 mm mandrel length 630 (655) mm mandrel – Ø (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3,0 kW no. – limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available
            sheet width - max. 0600 mm
            coil weight 3,00 t
            coil internal dia. 465 - 530 mm
            weight of the machine ca. 2,45 t
            dimensions of the machine ca. 2,72 x 1,70 x 2,40 m
            Description :
            material width (previously) 400 mm
            mandrel length 630 (655) mm
            mandrel – Ø (expanding range) 465 – 530 mm
            height floor - middle of mandrel 1.450 mm
            height upper edge decoiler construction - middle of mandrel 1.050 mm
            working direction (previously) right - left
            accessories:
            construction 3-segment-construction
            decoiler movable on base frame hydraulically
            press arm hydraulically
            press roll not driven
            expanding process mechanically
            decoiler motor driven (via chain) power 3,0 kW
            no. – limiting arms 6
            dimension – limiting arms (l x h) 410 x 180 mm
            valve components mounted at decoiler construction
            control unit (breaker unit) with cable
            hydraulic unit not available


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils ARKU AH 3000-400-MSG-4Q

          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland
          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-01090 · Decoilers for Coils

          ARKU - AH 3000-400-MSG-4Q - - 1997 -

          Technical details
          coil weight 3,00 t︱material width 600 mm︱coil internal dia. 465-530 mm︱machine weight app. 2,45 t︱required space app. 2,72x1,70x2,40 m︱
          material width (previously) 400 mm mandrel length 630 (655) mm mandrel – Ø (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3,0 kW no. – limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available
            coil weight 3,00 t
            material width 600 mm
            coil internal dia. 465-530 mm
            machine weight app. 2,45 t
            required space app. 2,72x1,70x2,40 m
            Description :
            material width (previously) 400 mm
            mandrel length 630 (655) mm
            mandrel – Ø (expanding range) 465 – 530 mm
            height floor - middle of mandrel 1.450 mm
            height upper edge decoiler construction - middle of mandrel 1.050 mm
            working direction (previously) right - left

            accessories:
            construction 3-segment-construction
            decoiler movable on base frame hydraulically
            press arm hydraulically
            press roll not driven
            expanding process mechanically
            decoiler motor driven (via chain) power 3,0 kW
            no. – limiting arms 6
            dimension – limiting arms (l x h) 410 x 180 mm
            valve components mounted at decoiler construction
            control unit (breaker unit) with cable

            hydraulic unit not available


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

          • Datasheet
          Request / Contact

          Flanging Machine

          used Sheet metal working / shaeres / bending Flanging Machine HESSE by SAHINLER SDK 8

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1019 · Flanging Machine

          HESSE by SAHINLER - SDK 8 - - -

          Technical details
          neu ︱ ca. 12 - 14 Wochen ab Auf ︱ Türkei ︱ 92000 €︱ 1849.2 €︱ 8 mm︱ 5 mm︱ 80 mm︱ 10 mm︱ 4500 mm︱ 720 mm︱ 95 (R 80) / 35 (R 25) mm︱ 10 kW︱ 4900 mm︱ 1700 mm︱ 2700 mm︱ 4550 kg︱
          incl. flanging rolls for mild steel (R25) incl. cutting blade hydraulically adjustable carrier from top to bottom cutting and flanging on the same head lateral support rolls Operator panel with touch screen Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request
            neu
            ca. 12 - 14 Wochen ab Auf
            Türkei
            92000 €
            1849.2 €
            8 mm
            5 mm
            80 mm
            10 mm
            4500 mm
            720 mm
            95 (R 80) / 35 (R 25) mm
            10 kW
            4900 mm
            1700 mm
            2700 mm
            4550 kg
            Description :
            incl. flanging rolls for mild steel (R25)
            incl. cutting blade
            hydraulically adjustable carrier from top to bottom
            cutting and flanging on the same head
            lateral support rolls
            Operator panel with touch screen

            Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact

          Plate Bending Machine - 4 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HSS 20-280

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2243 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HSS 20-280 - - -

          Technical details
          neu ︱ ca. 12 Wochen ab Auftrags ︱ Türkei ︱ 82900 €︱ 1666.29 €︱ 2050 mm︱ 20 mm︱ 20 mm︱ 16 mm︱ 16 mm︱ 12 mm︱ 280 mm︱ 280 mm︱ 220 mm︱ 1,5 / 5 m/min︱ 16,5 kW︱ 4350 mm︱ 1700 mm︱ 1850 mm︱ 8550 kg︱
          4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            82900 €
            1666.29 €
            2050 mm
            20 mm
            20 mm
            16 mm
            16 mm
            12 mm
            280 mm
            280 mm
            220 mm
            1,5 / 5 m/min
            16,5 kW
            4350 mm
            1700 mm
            1850 mm
            8550 kg
            Description :
            4 rolls
            fullhydraulic drive of upper roll and lower roll
            hydraulic infeed of lower and side roll
            digital read-out of lower and side rolls position
            hardened rolls
            conical bending device
            hydraulic load relieving of upper roll
            hydraulic drop-end bearing
            2 working speeds
            central lubrication system
            protectionagainst overload
            moveable control pane
            according to CE rules

            OPTIONAL EQUIPMENT (PRICES ON REQUEST):
            infinitely adustable speed of rolls
            hydraulic side support
            hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            the cone length can be max. 30 % oremust be more than 60 % of roll length
            hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-200

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2215 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-200 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 45900 €︱ 931.77 €︱ 2050 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 200 - 220 mm︱ 200 - 220 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4400 mm︱ 1150 mm︱ 1250 mm︱ 3950 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            45900 €
            931.77 €
            2050 mm
            10 mm
            10 mm
            8 mm
            8 mm
            6 mm
            200 - 220 mm
            200 - 220 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            4400 mm
            1150 mm
            1250 mm
            3950 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 15-220

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2161 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 15-220 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 49000 €︱ 994.7 €︱ 1550 mm︱ 12 mm︱ 12 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 220 mm︱ 200 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 3900 mm︱ 1150 mm︱ 1250 mm︱ 3600 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            49000 €
            994.7 €
            1550 mm
            12 mm
            12 mm
            10 mm
            10 mm
            8 mm
            220 mm
            200 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            3900 mm
            1150 mm
            1250 mm
            3600 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 30-245

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-262 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 30-245 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 62200 €︱ 1250.22 €︱ 3100 mm︱ 9 mm︱ 8 mm︱ 7 mm︱ 7 mm︱ 5 mm︱ 245 mm︱ 245 mm︱ 180 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 5350 mm︱ 1600 mm︱ 1470 mm︱ 6850 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            62200 €
            1250.22 €
            3100 mm
            9 mm
            8 mm
            7 mm
            7 mm
            5 mm
            245 mm
            245 mm
            180 mm
            1,5 / 6 m/min
            7.5 kW
            5350 mm
            1600 mm
            1470 mm
            6850 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-220

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-268 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-220 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 52100 €︱ 1047.21 €︱ 2050 mm︱ 11 mm︱ 11 mm︱ 9 mm︱ 9 mm︱ 7 mm︱ 220 mm︱ 220 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4400 mm︱ 1150 mm︱ 1250 mm︱ 4080 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            52100 €
            1047.21 €
            2050 mm
            11 mm
            11 mm
            9 mm
            9 mm
            7 mm
            220 mm
            220 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            4400 mm
            1150 mm
            1250 mm
            4080 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 25-245

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-270 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 25-245 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 59000 €︱ 1185.9 €︱ 2550 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 245 mm︱ 245 mm︱ 180 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4800 mm︱ 1600 mm︱ 1470 mm︱ 6170 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            59000 €
            1185.9 €
            2550 mm
            10 mm
            10 mm
            8 mm
            8 mm
            6 mm
            245 mm
            245 mm
            180 mm
            1,5 / 6 m/min
            7.5 kW
            4800 mm
            1600 mm
            1470 mm
            6170 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 30-260

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-272 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 30-260 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 67700 €︱ 1360.77 €︱ 3100 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 260 mm︱ 260 mm︱ 200 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 5350 mm︱ 1600 mm︱ 1550 mm︱ 7685 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            67700 €
            1360.77 €
            3100 mm
            10 mm
            10 mm
            8 mm
            8 mm
            6 mm
            260 mm
            260 mm
            200 mm
            1,5 / 6 m/min
            7.5 kW
            5350 mm
            1600 mm
            1550 mm
            7685 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-245

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-274 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-245 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 56100 €︱ 1127.61 €︱ 2050 mm︱ 13 mm︱ 13 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 245 mm︱ 245 mm︱ 180 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4300 mm︱ 1600 mm︱ 1470 mm︱ 5450 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            56100 €
            1127.61 €
            2050 mm
            13 mm
            13 mm
            10 mm
            10 mm
            8 mm
            245 mm
            245 mm
            180 mm
            1,5 / 6 m/min
            7.5 kW
            4300 mm
            1600 mm
            1470 mm
            5450 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-260

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-276 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-260 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 60500 €︱ 1216.05 €︱ 2050 mm︱ 16 mm︱ 16 mm︱ 13 mm︱ 13 mm︱ 10 mm︱ 260 mm︱ 260 mm︱ 200 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4300 mm︱ 1600 mm︱ 1550 mm︱ 6100 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            60500 €
            1216.05 €
            2050 mm
            16 mm
            16 mm
            13 mm
            13 mm
            10 mm
            260 mm
            260 mm
            200 mm
            1,5 / 6 m/min
            7.5 kW
            4300 mm
            1600 mm
            1550 mm
            6100 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HSS 30-350

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-278 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HSS 30-350 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 127000 €︱ 2527.3 €︱ 3100 mm︱ 20 mm︱ 20 mm︱ 16 mm︱ 16 mm︱ 12 mm︱ 350 mm︱ 350 mm︱ 260 mm︱ 1,5-5 m/min︱ 22 kW︱ 6000 mm︱ 2200 mm︱ 1900 mm︱ 15000 kg︱
          4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            127000 €
            2527.3 €
            3100 mm
            20 mm
            20 mm
            16 mm
            16 mm
            12 mm
            350 mm
            350 mm
            260 mm
            1,5-5 m/min
            22 kW
            6000 mm
            2200 mm
            1900 mm
            15000 kg
            Description :
            4 rolls
            fullhydraulic drive of upper roll and lower roll
            hydraulic infeed of lower and side roll
            digital read-out of lower and side rolls position
            hardened rolls
            conical bending device
            hydraulic load relieving of upper roll
            hydraulic drop-end bearing
            2 working speeds
            central lubrication system
            protectionagainst overload
            moveable control pane
            according to CE rules

            OPTIONAL EQUIPMENT:
            infinitely adustable speed of rolls
            hydraulic side support
            hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            the cone length can be max. 30 % oremust be more than 60 % of roll length
            hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 25-220

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-260 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 25-220 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 53700 €︱ 1079.37 €︱ 2550 mm︱ 9 mm︱ 9 mm︱ 7 mm︱ 7 mm︱ 5 mm︱ 220 mm︱ 220 mm︱ 160 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4900 mm︱ 1150 mm︱ 1250 mm︱ 4600 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            53700 €
            1079.37 €
            2550 mm
            9 mm
            9 mm
            7 mm
            7 mm
            5 mm
            220 mm
            220 mm
            160 mm
            1,5 / 6 m/min
            5.5 kW
            4900 mm
            1150 mm
            1250 mm
            4600 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 25-260

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1483 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 25-260 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 64100 €︱ 1288.41 €︱ 2550 mm︱ 13 mm︱ 13 mm︱ 10 mm︱ 10 mm︱ 8 mm︱ 260 mm︱ 260 mm︱ 200 mm︱ 1,5 / 6 m/min︱ 7.5 kW︱ 4800 mm︱ 1600 mm︱ 1550 mm︱ 6800 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            64100 €
            1288.41 €
            2550 mm
            13 mm
            13 mm
            10 mm
            10 mm
            8 mm
            260 mm
            260 mm
            200 mm
            1,5 / 6 m/min
            7.5 kW
            4800 mm
            1600 mm
            1550 mm
            6800 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-150

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-250 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-150 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 35000 €︱ 710.5 €︱ 2050 mm︱ 6 mm︱ 6 mm︱ 4 mm︱ 4 mm︱ 3 mm︱ 150 mm︱ 150 mm︱ 130 mm︱ 1,5 / 6 m/min︱ 4 kW︱ 4250 mm︱ 960 mm︱ 1100 mm︱ 2800 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            35000 €
            710.5 €
            2050 mm
            6 mm
            6 mm
            4 mm
            4 mm
            3 mm
            150 mm
            150 mm
            130 mm
            1,5 / 6 m/min
            4 kW
            4250 mm
            960 mm
            1100 mm
            2800 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HS 20-180

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2213 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HS 20-180 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 40500 €︱ 822.15 €︱ 2050 mm︱ 8 mm︱ 8 mm︱ 6 mm︱ 6 mm︱ 4 mm︱ 180 mm︱ 180 mm︱ 150 mm︱ 1,5 / 6 m/min︱ 5.5 kW︱ 4400 mm︱ 1150 mm︱ 1250 mm︱ 3790 kg︱
          4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            40500 €
            822.15 €
            2050 mm
            8 mm
            8 mm
            6 mm
            6 mm
            4 mm
            180 mm
            180 mm
            150 mm
            1,5 / 6 m/min
            5.5 kW
            4400 mm
            1150 mm
            1250 mm
            3790 kg
            Description :
            4 rolls
            Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system
            Pinch roll and latereal rolls move with hydraulic cylinders
            Digital read-out for lower and side rolls position
            Hardened rolls
            Conical bending device
            Hydraulic load relieving of upper roll
            Hydraulic drop-end bearing
            2 working speeds
            Protectionagainst overload
            Moveable control pane
            According to CE rules

            OPTIONAL EQUIPMENT:
            Infinitely adustable speed of rolls
            Hydraulic side support
            Hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            The max. sheet metal thickness isequivalent to 50 % of nominal capacity
            The cone length can be max. 30 % oremust be more than 60 % of roll length
            Hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HSS 20-350

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-282 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HSS 20-350 - - -

          Technical details
          neu ︱ ca. 12 Wochen ab Auftrags ︱ Türkei ︱ 111100 €︱ 2210.89 €︱ 2050 mm︱ 30 mm︱ 30 mm︱ 25 mm︱ 25 mm︱ 20 mm︱ 350 mm︱ 350 mm︱ 260 mm︱ 1,5-5 m/min︱ 22 kW︱ 5000 mm︱ 2000 mm︱ 1900 mm︱ 11000 kg︱
          4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended
            neu
            ca. 12 Wochen ab Auftrags
            Türkei
            111100 €
            2210.89 €
            2050 mm
            30 mm
            30 mm
            25 mm
            25 mm
            20 mm
            350 mm
            350 mm
            260 mm
            1,5-5 m/min
            22 kW
            5000 mm
            2000 mm
            1900 mm
            11000 kg
            Description :
            4 rolls
            fullhydraulic drive of upper roll and lower roll
            hydraulic infeed of lower and side roll
            digital read-out of lower and side rolls position
            hardened rolls
            conical bending device
            hydraulic load relieving of upper roll
            hydraulic drop-end bearing
            2 working speeds
            central lubrication system
            protectionagainst overload
            moveable control pane
            according to CE rules

            OPTIONAL EQUIPMENT:
            infinitely adustable speed of rolls
            hydraulic side support
            hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            the cone length can be max. 30 % oremust be more than 60 % of roll length
            hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HESSE by SAHINLER 4R HSS 25-350

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-280 · Plate Bending Machine - 4 Rolls

          HESSE by SAHINLER - 4R HSS 25-350 - - -

          Technical details
          neu ︱ ca. 10 Wochen ab Auftrags ︱ Türkei ︱ 117800 €︱ 2344.22 €︱ 2550 mm︱ 25 mm︱ 25 mm︱ 20 mm︱ 20 mm︱ 16 mm︱ 350 mm︱ 350 mm︱ 260 mm︱ 1,5-5 m/min︱ 22 kW︱ 5500 mm︱ 2000 mm︱ 1900 mm︱ 13000 kg︱
          4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended
            neu
            ca. 10 Wochen ab Auftrags
            Türkei
            117800 €
            2344.22 €
            2550 mm
            25 mm
            25 mm
            20 mm
            20 mm
            16 mm
            350 mm
            350 mm
            260 mm
            1,5-5 m/min
            22 kW
            5500 mm
            2000 mm
            1900 mm
            13000 kg
            Description :
            4 rolls
            fullhydraulic drive of upper roll and lower roll
            hydraulic infeed of lower and side roll
            digital read-out of lower and side rolls position
            hardened rolls
            conical bending device
            hydraulic load relieving of upper roll
            hydraulic drop-end bearing
            2 working speeds
            central lubrication system
            protectionagainst overload
            moveable control pane
            according to CE rules

            OPTIONAL EQUIPMENT:
            infinitely adustable speed of rolls
            hydraulic side support
            hydraulic top support

            IMPORTANT ISSUES AT CONICAL BENDING:
            the max. sheet metal thickness isequivalent to 50 % of nominal capacity
            the cone length can be max. 30 % oremust be more than 60 % of roll length
            hardened rolls are recommended


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact

          Roller leveller

          used Sheet metal working / shaeres / bending Roller leveller ARKU GBR 9.250.30

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073144 · Roller leveller

          ARKU - GBR 9.250.30 - - 1982 - konventionell

          Technical details
          material width 250 mm︱material thickness 0,4 - 3,5 mm︱no. of straightening rolls 9 ︱straightening roll diameter 30 mm︱speed 3 - 15 m/min︱material thickness at 250 mm material width 3,0 mm︱material thickness at 200 mm material width 3,5 mm︱power capacity 1,8 kW︱weight 0,9 t︱Dimensions (WxDxH) 1,45 x 1,4 x 1,55 m︱
          with infinitely variable drive material thickness 3,0 mm at material width 250 mm material thickness 3,5 mm at material width 200 mm
            material width 250 mm
            material thickness 0,4 - 3,5 mm
            no. of straightening rolls 9
            straightening roll diameter 30 mm
            speed 3 - 15 m/min
            material thickness at 250 mm mat. 3,0 mm
            material thickness at 200 mm mat. 3,5 mm
            power capacity 1,8 kW
            weight 0,9 t
            Dimensions (WxDxH) 1,45 x 1,4 x 1,55 m
            Description :
            with infinitely variable drive
            material thickness 3,0 mm at material width 250 mm
            material thickness 3,5 mm at material width 200 mm


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   
            •

          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.

          TOP Manufacturer:

          OSTAS - TRUMPF - HESSE BY DURMA - ERMAK - DURMA - FASTI - NN - EHT - HUVEMA - GEKA -

          Compendium
          Logiciels
          Contenu des machines d'occasion
          Confidentialité
          Suivez-nous
          © 2000-2024, Logotech oHG · Logiciels et services Internet - Tous droits réservés