Réseau européen de revendeurs de machines de stockage

Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Metal Processing - Sheet metal working - shaeres - bending

          Machinelist: Tôlerie / shaeres / pliage


          Analysis Unit

          Usine de tôlerie / cisailles / cintrage d'occasion BRUKER Q6 COLUMBUS QC / V


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-1277 · Analysis Unit

          BRUKER - Q6 COLUMBUS QC/V - - 2007 -

          Technical details
          power 1000 W ︱Machine Weight app. - t︱Required Space app. - m︱
          EMISSION SPECTROMETER power 1000 W, 230 V, 50 - 60 Hz rotary vane pump otherwise according to data sheet
            power 1000 W
            Machine Weight app. - t
            Required Space app. - m
            Description :
            EMISSION SPECTROMETER

            power 1000 W, 230 V, 50 - 60 Hz

            rotary vane pump

            otherwise according to data sheet

          Datasheet
          Request / Contact
          Unité tôlerie / traitement des shaeres / flexion occasion OBLF ES 750-CA


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-1276 · Analysis Unit

          OBLF - ES 750-CA - - 1990 -

          Technical details
          Measuring on Base of x 0︱Elements I-FE/C/SI/MN/P 0︱Required Space app. 1,35x0,90x1,15 m︱Machine Weight app. 0,5 t︱
          SPECTROMETER with 9 ports for analysis analysis individual values matrix/prog: FE / FE 1 concentration in weight percent coil-no.: example 8888 elements: I-FE / C / SI / MN / P / S / AL / TI / NB
            Measuring on Base of x 0
            Elements I-FE/C/SI/MN/P 0
            Required Space app. 1,35x0,90x1,15 m
            Machine Weight app. 0,5 t
            Description :
            SPECTROMETER with 9 ports for analysis

            analysis individual values
            matrix/prog: FE / FE 1 concentration in weight percent
            coil-no.: example 8888

            elements: I-FE / C / SI / MN / P / S / AL / TI / NB
          Datasheet
          Request / Contact
          Plateau d'analyse / Traitement des tôles / pliage d'occasion VOLLMER VBK 563 / 12E


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-04102a · Analysis Unit

          VOLLMER - VBK 563/12E - - -

          Technical details
          type VBK 563/12E ︱measuring depth x mm︱material thickness 0,05 - 6,00 mm︱material width 1 - 25 mm︱speed m/min︱required space m︱
          STRIP THICKNESS- and WIDTH GAUGE type: supposedly VBK 563/12 E partially revamped: (precision dial gauge 20 MUBE/0 include slide bush, caliper and gauge slide revamped by VOLLMER) include 2 pc. of amplifier, manufacturer VOLLMER, type VMF, for thickness-and width measuring process
            type VBK 563/12E
            measuring depth x mm
            material thickness 0,05 - 6,00 mm
            material width 1 - 25 mm
            Description :
            STRIP THICKNESS- and WIDTH GAUGE

            type: supposedly VBK 563/12 E

            partially revamped:
            (precision dial gauge 20 MUBE/0 include slide bush, caliper
            and gauge slide revamped by VOLLMER)

            include 2 pc. of amplifier, manufacturer VOLLMER,
            type VMF, for thickness-and width measuring process

          Datasheet
          Request / Contact

          Annealing Plant

          Centrales de traitement / de traitement / de cintrage / pliage d'occasion EBNER


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-14021 · Annealing Plant

          EBNER - - - 2011 -

          Technical details
          Base Diameter 1.900 mm︱stacking height 4.500 mm︱Coil Weight per Base 100 t︱required space app. m︱machine weight app. t︱
          execution: ANNEALING PLANT HICON/H2 heating temperature 850 degree C temperature inside inner cover 280 - 750 degree C otherwise according to technical specification 14.02-1
            Base Diameter 1.900 mm
            stacking height 4.500 mm
            Coil Weight per Base 100 t
            Description :
            execution: ANNEALING PLANT HICON/H2

            heating temperature 850 degree C
            temperature inside inner cover 280 - 750 degree C

            otherwise according to technical specification 14.02-1
          Datasheet
          Request / Contact

          Bar Stock Shearing Machines

          Tailleuse de barres / cintreuse / cintreuse d'occasion MUBEA HIW 1000/610


          • ERICH MIETH Maschinenhandel
          • Odenwaldstraße 63
          • 63322 Rödermark
          • Deutschland

          • +49 (0) 6074 908 77
            +49 (0) 6074 909 10
          • info@mieth-maschinen.de
            www.mieth-maschinen.de
          #2051-17403 · Bar Stock Shearing Machines

          MUBEA - HIW 1000/610 - - 1995 -

          Technical details
          round bar steel - ︱square edge steel - ︱pressing power -
            round bar steel -
            square edge steel -
            pressing power -
          Datasheet
          Request / Contact
          Cisaille à bois d'occasion / cisailles / cintreuses PEDDINGHAUS Peddimaster 800/1100 H


          • ERICH MIETH Maschinenhandel
          • Odenwaldstraße 63
          • 63322 Rödermark
          • Deutschland

          • +49 (0) 6074 908 77
            +49 (0) 6074 909 10
          • info@mieth-maschinen.de
            www.mieth-maschinen.de
          #2051-14060 · Bar Stock Shearing Machines

          PEDDINGHAUS - Peddimaster 800/1100 H - - 1994 -

          Technical details
          round bar steel - ︱square edge steel - ︱pressing power -
            round bar steel -
            square edge steel -
            pressing power -
          Datasheet
          Request / Contact
          Tailleuse de barres / cintreuse / cintreuse d'occasion MUBEA MIW 400


          • ERICH MIETH Maschinenhandel
          • Odenwaldstraße 63
          • 63322 Rödermark
          • Deutschland

          • +49 (0) 6074 908 77
            +49 (0) 6074 909 10
          • info@mieth-maschinen.de
            www.mieth-maschinen.de
          #2051-17247 · Bar Stock Shearing Machines

          MUBEA - MIW 400 - - 1988 -

          Technical details
          round bar steel - ︱square edge steel - ︱pressing power -
            round bar steel -
            square edge steel -
            pressing power -
          Datasheet
          Request / Contact
          Tôlerie / shaderes / flexion d'occasion Barre Cisailles à métaux MUHR & BENDER KLSH 900


          • ERICH MIETH Maschinenhandel
          • Odenwaldstraße 63
          • 63322 Rödermark
          • Deutschland

          • +49 (0) 6074 908 77
            +49 (0) 6074 909 10
          • info@mieth-maschinen.de
            www.mieth-maschinen.de
          #2051-17202 · Bar Stock Shearing Machines

          MUHR & BENDER - KLSH 900 - - 1984 -

          Technical details
          round bar steel - ︱square edge steel - ︱pressing power -
            round bar steel -
            square edge steel -
            pressing power -
          Datasheet
          Request / Contact
          Tôlerie / shaderes / flexion d'occasion Barre de cisaillement pour le stock WMW-NOSSEN Sc FDLA 13 - 1


          • ERICH MIETH Maschinenhandel
          • Odenwaldstraße 63
          • 63322 Rödermark
          • Deutschland

          • +49 (0) 6074 908 77
            +49 (0) 6074 909 10
          • info@mieth-maschinen.de
            www.mieth-maschinen.de
          #2051-18474 · Bar Stock Shearing Machines

          WMW-NOSSEN - Sc FDLA 13 - 1 - - 1982 -

          Technical details
          round bar steel 90° bis 36 mm ︱square edge steel 90° bis 30 mm ︱pressing power -
            round bar steel 90° bis 36 mm
            square edge steel 90° bis 30 mm
            pressing power -
          Datasheet
          Request / Contact
          Tôlerie / shaeres / pliage d'occasion Barre Cisaillees MUBEA KFS 50


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051315 · Bar Stock Shearing Machines

          MUBEA - KFS 50 - - 1975 -

          Technical details
          flat steel 100x36 oder 200x20 mm︱no. of strokes 40 Hub/min︱Cross section max. 4000 mm²︱total power requirement 5,5 kW︱weight of the machine ca. 3.080 kg︱dimensions of the machine ca. 1500x1500x2400 mm︱
            flat steel 100x36 oder 200x20 mm
            no. of strokes 40 Hub/min
            Cross section max. 4000 mm²
            total power requirement 5,5 kW
            weight of the machine ca. 3.080 kg
            dimensions of the machine ca. 1500x1500x2400 mm
          Datasheet
          Request / Contact
          Tôlerie / shaeres / pliage d'occasion Barre Cisailles PEDDINGHAUS Simplex 63


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-102950 · Bar Stock Shearing Machines

          PEDDINGHAUS - Simplex 63 - - 1974 -

          Technical details
          round bar steel 63 mm︱square edge steel 55 mm︱ Flach 100 x 25 mm︱pressing power t︱no. of strokes Hub/min︱ ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          SHEAR constr. Peddinghaus type Simplex 63 cutting range Ø 63 mm max. square 55 mm max. flats 100 x 25 mm Weight: appr. 2450 kg
            round bar steel 63 mm
            square edge steel 55 mm
            Flach 100 x 25 mm
            Description :
            SHEAR
            constr. Peddinghaus

            type Simplex 63

            cutting range Ø 63 mm max.
            square 55 mm max.
            flats 100 x 25 mm


            Weight: appr. 2450 kg
          Datasheet
          Request / Contact
          Tôlerie / shaeres / pliage d'occasion Barre Cisailles PEDDINGHAUS Simplex 50


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-102953 · Bar Stock Shearing Machines

          PEDDINGHAUS - Simplex 50 - - -

          Technical details
          round bar steel 50 mm︱square edge steel 45 mm︱pressing power t︱no. of strokes Hub/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          SHEAR constr. Peddinghaus type Simplex 50 cutting range Ø 50 mm max. square 45 mm max. flats 90 x 20 mm Weight: appr. 1400 kg
            round bar steel 50 mm
            square edge steel 45 mm
            Description :
            SHEAR
            constr. Peddinghaus

            type Simplex 50

            cutting range Ø 50 mm max.
            square 45 mm max.
            flats 90 x 20 mm

            Weight: appr. 1400 kg
          Datasheet
          Request / Contact

          bending machine horizontal

          Tôlerie / Presse à cintrer / Plieuses d'occasion ZOPF T 100 digital


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9030006 · bending machine horizontal

          ZOPF - T 100 digital - - Neu -

          Technical details
          pressure 100 kN︱stroke 0-200 mm︱table-size 450 x 1000 mm︱working speed: 6-10 mm/ sec.︱return speed 20 mm/sec︱work height max. 900 mm︱toolpiece height max. 200 mm︱total power requirement 1,5 kW︱bending capacity max. - round 42x3,2 mm︱ 150x10 mm︱weight 320 kg︱dimensions 1010x480x1120 mm︱
            pressure 100 kN
            stroke 0-200 mm
            table-size 450 x 1000 mm
            working speed: 6-10 mm/ sec.
            return speed 20 mm/sec
            work height max. 900 mm
            toolpiece height max. 200 mm
            total power requirement 1,5 kW
            bending capacity max. - round 42x3,2 mm
            150x10 mm
            weight 320 kg
            dimensions 1010x480x1120 mm
          Datasheet
          Request / Contact
          Tôlerie / Presse à cintrer / Plieuses d'occasion ZOPF T 300 Multiprogramm


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040186 · bending machine horizontal

          ZOPF - T 300 Multiprogramm - - Neu -

          Technical details
          300 kN︱stroke length max. 235 mm︱working feed 10 mm/sec︱return speed 20 mm/sec︱ 660x1250 mm︱work height max. 900 mm︱toolpiece height max. 250 mm︱total power requirement 3 kW︱ 200x12 mm︱bending capacity max. - round 60x4,0 mm︱weight 950 kg︱
          Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm
            300 kN
            stroke length max. 235 mm
            working feed 10 mm/sec
            return speed 20 mm/sec
            660x1250 mm
            work height max. 900 mm
            toolpiece height max. 250 mm
            total power requirement 3 kW
            200x12 mm
            bending capacity max. - round 60x4,0 mm
            weight 950 kg
            Description :
            Domestic equipments:
            - semi-automatic NC control (99 programs with 16 steps each)
            - incl. bending bolt (without punch)
            - Incl. tool holder for dies
            - incl. foot pedal

            Equipment:
            - Stamp, smallest U = 145 mm 85 °
               H = 250 mm, R = 5 mm
            - Quick change Monomatrize 85 °
               H = 250 mm, V = 63 mm
          Datasheet
          Request / Contact
          Tôlerie / Presse à cintrer / Plieuses d'occasion ZOPF T 200 Multiprogramm


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040221 · bending machine horizontal

          ZOPF - T 200 Multiprogramm - - Neu -

          Technical details
          200 kN︱stroke length max. 200 mm︱working feed 10 mm/sec︱return speed 20 mm/sec︱ 480x1060 mm︱work height max. 900 mm︱toolpiece height max. 200 mm︱total power requirement 2,2 kW︱ 200x12 mm︱bending capacity max. - round 48x4,0 mm︱weight 500 kg︱Overall size 1010x480x1120 mm︱
          Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm
            200 kN
            stroke length max. 200 mm
            working feed 10 mm/sec
            return speed 20 mm/sec
            480x1060 mm
            work height max. 900 mm
            toolpiece height max. 200 mm
            total power requirement 2,2 kW
            200x12 mm
            bending capacity max. - round 48x4,0 mm
            weight 500 kg
            Overall size 1010x480x1120 mm
            Description :
            Domestic equipments:
            - with semi-automatic control (99 programs with 16 steps each)
            - including bending bolt (without punch)
            - Tool holder for dies
            - Foot pedal

            Equipment:
            - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm
            - Quick change monometer 85 °, H = 200 mm, V = 63 mm
          Datasheet
          Request / Contact
          Tôlerie / Presse à cintrer / Plieuses d'occasion ZOPF T 400 Multiprogramm


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040228 · bending machine horizontal

          ZOPF - T 400 Multiprogramm - - Neu -

          Technical details
          400 kN︱stroke length max. 285 mm︱working feed 9 mm/sec︱return speed 20 mm/sec︱ 660x1250 mm︱work height max. 930 mm︱toolpiece height max. 250 mm︱total power requirement 4 kW︱ 200x26 mm︱bending capacity max. - round 60x5,0 mm︱weight 1050 kg︱
          Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal
            400 kN
            stroke length max. 285 mm
            working feed 9 mm/sec
            return speed 20 mm/sec
            660x1250 mm
            work height max. 930 mm
            toolpiece height max. 250 mm
            total power requirement 4 kW
            200x26 mm
            bending capacity max. - round 60x5,0 mm
            weight 1050 kg
            Description :
            Domestic equipments:
            - semi-automatic NC control (99 programs with 16 steps each)
            - incl. bending bolt (without punch)
            - Incl. tool holder for dies
            - incl. foot pedal
          Datasheet
          Request / Contact
          Tôlerie d'occasion / shaeres / cintreuse horizontale Gelber Bieger Mobi-Bieger 100


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5765 · bending machine horizontal

          Gelber Bieger - Mobi-Bieger 100 - - NEU -

          Technical details
          pressure 10 t︱stroke 150 mm︱table-size 250 x 250 mm︱bending capacity max. - flat 100 x 15 mm︱bending capacity max. - round 16 mm︱bending speed < 10 mm/sec︱hydraulic-pressure 20 bar︱
            pressure 10 t
            stroke 150 mm
            table-size 250 x 250 mm
            bending capacity max. - flat 100 x 15 mm
            bending capacity max. - round 16 mm
            bending speed < 10 mm/sec
            hydraulic-pressure 20 bar
          Datasheet
          Request / Contact
          tôlerie / cintreuse / cintreuse plieuse horizontale RHTC PROFI PRESS HB - 28 occasion


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6284 · bending machine horizontal

          RHTC - PROFI PRESS HB - 28 - - NEU -

          Technical details
          pressure 28 t︱stroke 180 mm︱table-size 300 x 550 mm︱diameter of piston 130 mm︱work speed min. 2 m/sec︱work speed max. 9,8 m/sec︱return speed 20 mm/sec︱Max. pressure 200 bar︱weight of the machine ca. 0,65 t︱total power requirement 4 kW︱dimensions of the machine ca. 1,15 x 0,75 x 1,1 m︱
            pressure 28 t
            stroke 180 mm
            table-size 300 x 550 mm
            diameter of piston 130 mm
            work speed min. 2 m/sec
            work speed max. 9,8 m/sec
            return speed 20 mm/sec
            Max. pressure 200 bar
            weight of the machine ca. 0,65 t
            total power requirement 4 kW
            dimensions of the machine ca. 1,15 x 0,75 x 1,1 m
          Datasheet
          Request / Contact
          Tôlerie / cintrage / cintrage machine à cintrer horizontale SIMASV T 40 Digit Cool 2P


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08101 · bending machine horizontal

          SIMASV - T 40 Digit Cool 2P - - Fabrikneu / new -

          Technical details
          pressure 40 t︱stroke 250 mm︱table-size 1100 x 625 mm︱flat steel flat 160 x 20 mm︱tube diameter max. 60 mm︱table height 955 mm︱ajustment speed 1750 mm/sec︱work speed 470 m/min︱return speed 1980 mm/sec︱total power requirement 3 kW︱weight of the machine ca. 1000 kg︱dimensions of the machine ca. 2450 x 1200 x 1100H mm︱quantity of oil 70 l︱Autom. central lubrication ︱Helb boring to fastening from special tools ︱Lateral places of deposit ︱Conical index bolts H = 120 mm ( patented ) ︱for changing the tools ︱Aut. cooling of the hydraluic unit
          New hydraulic horizontal bending press with variable pressure regulation under load, patented tool holder located underneath the cylinder and 2 axis control. Programming and control of the power stroke by electronic numerical control Simply logic by SIMASV®, even under pressure, so that the desired bending angle can be achieved without trials. Becaue of this system the machine is suitable for the production of prototypes as well as for the production large series. Keyboard, touch screen 'with 35 buttons on the front of the machine, LED 16x2 Script: - LCD display with high resolution. - Complete visualization of all work functions - "X" axis stroke (stamp) - "Y" axis of lateral positioning - 550 storable programs on "X" axis and the "Y" axis - Program with 15 different lines (999 times repeatable) - Programming, both in mm as well as in degree, of the bending angle by Setting the coefficient for the resilience of the material. - Choices in the program under 5 languages. - Conversion of the metric system (mm) to inches - Positioning precision ± 0.1 mm during the bending process - Linear scale for "NC" High resolution. - Programmierungswählschalter: manual, semiautomatic, automatic. Extensive range of tools available for the most diverse applications. SIMASV is certified manufacturer of quality machines since 1957 and ISO. Machine dealer with own stock of 2500 m².
            pressure 40 t
            stroke 250 mm
            table-size 1100 x 625 mm
            flat steel flat 160 x 20 mm
            tube diameter max. 60 mm
            table height 955 mm
            ajustment speed 1750 mm/sec
            work speed 470 m/min
            return speed 1980 mm/sec
            total power requirement 3 kW
            weight of the machine ca. 1000 kg
            dimensions of the machine ca. 2450 x 1200 x 1100H mm
            quantity of oil 70 l
            Description :
            New hydraulic horizontal bending press with variable pressure regulation
            under load, patented tool holder located underneath the cylinder and 2
            axis control.
            Programming and control of the power stroke by electronic numerical control
            Simply logic by SIMASV®, even under pressure, so that the desired bending angle
            can be achieved without trials. Becaue of this system the machine is suitable
            for the production of prototypes as well as for the production large series.
            Keyboard, touch screen 'with 35 buttons on the front of the machine, LED 16x2
            Script:
            - LCD display with high resolution.
            - Complete visualization of all work functions
            - "X" axis stroke (stamp)
            - "Y" axis of lateral positioning
            - 550 storable programs on "X" axis and the "Y" axis
            - Program with 15 different lines (999 times repeatable)
            - Programming, both in mm as well as in degree, of the bending angle by
            Setting the coefficient for the resilience of the material.
            - Choices in the program under 5 languages.
            - Conversion of the metric system (mm) to inches
            - Positioning precision ± 0.1 mm during the bending process
            - Linear scale for "NC" High resolution.
            - Programmierungswählschalter: manual, semiautomatic, automatic.
            Extensive range of tools available for the most diverse applications.
            SIMASV is certified manufacturer of quality machines since 1957 and ISO.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          Tôlerie / cintrage / cintrage - plieuse horizontale SIMASV T.40


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-10280 · bending machine horizontal

          SIMASV - T.40 - - Fabrikneu / new -

          Technical details
          pressure 40 t︱stroke 250 mm︱table-size 625 x 1100 mm︱flat steel flat 160 x 20 ︱tube diameter max. 60 mm︱table height 955 mm︱ajustment speed 1750 mm/min︱work speed 470 m/min︱return speed 1980 mm/min︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 1,2 x 1,15 x 1,11 m︱total power requirement 3 kW︱quantity of oil 70 l︱Central lubrication with hand pump ︱Helb boring to fastening from special tools ︱Lateral places of deposit ︱Conical index bolts ( patented ), 2 pieces ︱for changing the tools ︱Millimeter readout for movable punches ︱Foot pedal
          Hydr. horizontal bending press with below cylinder, stepless pressure adjustment unter load, patented tool taper. The machine is in the following sizes obtainable: pressure from 22 until 110 t, stroke from 200 until 330 mm. Many tools are in offer for the different kind of bending with additional price list. For more information please look at the video. Machine dealer with own stock of 2500 m².
            pressure 40 t
            stroke 250 mm
            table-size 625 x 1100 mm
            flat steel flat 160 x 20
            tube diameter max. 60 mm
            table height 955 mm
            ajustment speed 1750 mm/min
            work speed 470 m/min
            return speed 1980 mm/min
            weight of the machine ca. 900 kg
            dimensions of the machine ca. 1,2 x 1,15 x 1,11 m
            total power requirement 3 kW
            quantity of oil 70 l
            Description :
            Hydr. horizontal bending press with below cylinder, stepless pressure
            adjustment unter load, patented tool taper. The machine is in the following
            sizes obtainable: pressure from 22 until 110 t, stroke from 200 until 330 mm.
            Many tools are in offer for the different kind of bending with additional price
            list. For more information please look at the video.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          Tôlerie / cintrage / cintrage - plieuse horizontale SIMASV T. 22 hydra


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08033 · bending machine horizontal

          SIMASV - T. 22 hydra - - Fabrikneu / new -

          Technical details
          pressure 22 t︱stroke 200 mm︱table-size 630 x 1100 mm︱bending capacity - flat iron 120 x 15 mm︱table height over floor 925 mm︱quantity of oil 45 l︱motor 1,5 kW︱weight of the machine ca. 530 kg︱dimensions of the machine ca. 0,86 x 1,1 x 1,07 m︱Central lubrication with hand pump ︱Conical index bolts H = 120 mm ( patented ) 2 Stück/pieces︱Millimeter readout for movable punches ︱Foot pedal ︱Side stop 500 mm︱CE signed
          Hydr. horizontal bending press with below cylinder in order not to hinder the course of work, 2 speeds for adjustment, stroke regulation with sensitive electric limit switches and graduated millimeter rule, patented tool taper. The machine is in the following sizes obtainable: pressure from 22 until 110 t, stroke from 200 until 330 mm. Options: Wide range of tools for each purpose. Machine dealer with own stock of 2500 m².
            pressure 22 t
            stroke 200 mm
            table-size 630 x 1100 mm
            bending capacity - flat iron 120 x 15 mm
            table height over floor 925 mm
            quantity of oil 45 l
            motor 1,5 kW
            weight of the machine ca. 530 kg
            dimensions of the machine ca. 0,86 x 1,1 x 1,07 m
            Conical index bolts H = 120 mm (. 2 Stück/pieces
            Side stop 500 mm
            Description :
            Hydr. horizontal bending press with below cylinder in order not to hinder the
            course of work, 2 speeds for adjustment, stroke regulation with sensitive
            electric limit switches and graduated millimeter rule, patented tool taper. The
            machine is in the following sizes obtainable: pressure from 22 until 110 t,
            stroke from 200 until 330 mm.
            Options: Wide range of tools for each purpose.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          utilisé tôlerie / shaeres / cintrage cintreuse plieuse horizontale VEB ca.60T


          • ERICH MIETH Maschinenhandel
          • Odenwaldstraße 63
          • 63322 Rödermark
          • Deutschland

          • +49 (0) 6074 908 77
            +49 (0) 6074 909 10
          • info@mieth-maschinen.de
            www.mieth-maschinen.de
          #2051-13473 · bending machine horizontal

          VEB - ca.60T - - ca. 1988 -

          Technical details
          pressure - ︱stroke - ︱table-size -
            pressure -
            stroke -
            table-size -
          Datasheet
          Request / Contact
          tôlerie / cintreuse / cintreuse cintreuse horizontale d'occasion ESCHWEILER MASCHINENBAU 200 T


          • ERICH MIETH Maschinenhandel
          • Odenwaldstraße 63
          • 63322 Rödermark
          • Deutschland

          • +49 (0) 6074 908 77
            +49 (0) 6074 909 10
          • info@mieth-maschinen.de
            www.mieth-maschinen.de
          #2051-19099 · bending machine horizontal

          ESCHWEILER MASCHINENBAU - 200 T - - ca. 1970 -

          Technical details
          pressure - ︱stroke - ︱table-size -
            pressure -
            stroke -
            table-size -
          Datasheet
          Request / Contact
          Tôlerie / cintrage / cintrage - plieuse horizontale PROFI PRESS HB-28


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-081251 · bending machine horizontal

          PROFI PRESS - HB-28 - - 2020 -

          Technical details
          pressure 28 t︱stroke 180 mm︱table-size 300 x 550 mm︱total power requirement 4 kW︱weight of the machine ca. 0,650 t︱diameter of piston 180 mm︱working feed 2 mm/sec︱return speed 20 mm/sec︱pressure capacity max. 200 bar︱toolpiece height min. 200 mm︱dimensions of the machine ca. 1150 x 750 x 1103 mm︱
          This horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. ? ?The application of this Profi Press horizontal bending / straightening press varies depending on the accessories that can be installed on the worktable, on the tool mount and in the punch- and pin holes. This Profi Press model, the HB-28, is equipped with an angular graduation on the worktable for easy bend measurements and this horizontal press can be delivered with several tools (for example block punches) that can be mounted on the tool mount and tools that can be installed in the punch and pin holes to perform several works. The hydraulic system of this horizontal straightening / bending press can be regulated by means of the pressure- and flow adjustment valves which affect the pressing force and the speed of the press. The HB-28 is also equipped with an integrated manometer. The control panel of this horizontal straightening press features the operation and read-out of the piston stroke, a selector for manual or automatic operation and this hydraulic press is equipped with a built-in memory to save up to 4 different programs. Operation is carried out by electric foot pedals. There are many possibilities and purposes for this horizontal straightening press, so please inform us about your request and we will do our best to design the tools that suit your requirements. This Profi Press straightening / bending press is made in Europe and fulfils the latest CE-regulations.'
            pressure 28 t
            stroke 180 mm
            table-size 300 x 550 mm
            total power requirement 4 kW
            weight of the machine ca. 0,650 t
            diameter of piston 180 mm
            working feed 2 mm/sec
            return speed 20 mm/sec
            pressure capacity max. 200 bar
            toolpiece height min. 200 mm
            dimensions of the machine ca. 1150 x 750 x 1103 mm
            Description :
            This horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. ?

            ?The application of this Profi Press horizontal bending / straightening press varies depending on the accessories that can be installed on the worktable, on the tool mount and in the punch- and pin holes. This Profi Press model, the HB-28, is equipped with an angular graduation on the worktable for easy bend measurements and this horizontal press can be delivered with several tools (for example block punches) that can be mounted on the tool mount and tools that can be installed in the punch and pin holes to perform several works.

            The hydraulic system of this horizontal straightening / bending press can be regulated by means of the pressure- and flow adjustment valves which affect the pressing force and the speed of the press. The HB-28 is also equipped with an integrated manometer. The control panel of this horizontal straightening press features the operation and read-out of the piston stroke, a selector for manual or automatic operation and this hydraulic press is equipped with a built-in memory to save up to 4 different programs. Operation is carried out by electric foot pedals.
            There are many possibilities and purposes for this horizontal straightening press, so please inform us about your request and we will do our best to design the tools that suit your requirements. This Profi Press straightening / bending press is made in Europe and fulfils the latest CE-regulations.'
          Datasheet
          Request / Contact


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.