Réseau européen de revendeurs de machines de stockage
Quel terme de recherche utiliseriez-vous pour rechercher cette machine ?
Machining Center - Universal
GROB G550
Amann Werkzeugmaschinen GmbH
Landshuter Straße 1 · 85716 - Unterschleißheim(0049) 89 317754 0
(0049) 89 3174262
www.amann-wzm.de
Machine data
Machine photos
Document
Aucun autre document disponibleTechnical details
| x-travel | 800 mm |
| y-travel | 950 mm |
| z-travel | 1020 mm |
| Control | SIN840D sl |
| B - axis | 360 x 0,001 ° |
| A - axis | -185 / +45 x 0,001 ° |
| feed x-axis | 1 - 65.000 mm/min |
| feed y- axis | 1 - 50.000 mm/min |
| Feed z- axis | 1 - 80.000 mm / min. |
| rapid traverse X/Y/Z | 60 / 50 / 80 m/min |
| spindle turning speed - stepless | 1 - 18.000 U/min |
| power capacity at 100 % load | 29,00 kW |
| power capacity at 40 % load | 38,00 KW |
| max. torque at 40% / 100% load | 46,00 / 34,00 Nm |
| spindle diameter in front bearing | 70 mm |
| tool taper | HSK-A63 |
| tool magazin: | 2x 60 |
| tool length - max. | 360 / 400 mm |
| tool diameter | 68 mm |
| tool diameter with 2 vacant positions | 160 mm |
| tool total weight | 8,00 kg |
| Chip to chip time | 4,2 sec. |
| size of pallet | 2x 630x630 mm |
| workpiece weight | 700 kg |
| interference diameter | 900 mm |
| total power requirement | 50,00 kW |
| weight of the machine ca. | 25,00 t |
| dimensions of the machine ca. | 7,00 x 4,00 x H3,50 m |
Videos
Aucun fichier vidéo disponibleAdditional information
5-axis machining center with SIEMENS Sinumerik 840D SL control,
integrated KNOLL coolant system KF150, coolant high-pressure 80bar,
coolant through the spindle, chip conveyor, pallet changer,
RENISHAW OMP60 measuring probe, electromechanical tool length check,
HT8 manual operating device, BLUM-Laser, GROB Spindle-diagnosis (GSD)
workpiece pallets with ROEMHELD Speedy classic4 zero-point clamping system,
integrated workpiece clamping, kinematics-set.
integrated KNOLL coolant system KF150, coolant high-pressure 80bar,
coolant through the spindle, chip conveyor, pallet changer,
RENISHAW OMP60 measuring probe, electromechanical tool length check,
HT8 manual operating device, BLUM-Laser, GROB Spindle-diagnosis (GSD)
workpiece pallets with ROEMHELD Speedy classic4 zero-point clamping system,
integrated workpiece clamping, kinematics-set.
On this page you will find a an offer on a used Machining Center - Universal of type G550 of the company GROB with year of construction 2012 and with stock no.: 1006-18014. The machine is manufactured by the company Amann Werkzeugmaschinen GmbH from 85716 Unterschleißheim offered. The delivery time / delivery status for this machine is: on request For more information, please refer to the details listed.
Documents et vidéos
Aucun autre document disponible
Aucun fichier vidéo disponible
Machine
Machining Center - Universal
