Metal Processing - Laser Cutting Machine

table length 4.000 mm︱table width 2.000 mm︱laser strength 3 kW︱Laser type IPG ︱Control BodorPro 2.0 ︱positioning accuracy 0,05 mm︱repeating accuracy 0,03 mm︱rapid traverse 140 m/min︱max. acceleration 1,5 G︱max. table load 1.600 kg︱total power requirement - kW︱weight of the machine ca. 11,0 t︱dimensions of the machine ca. 12,0 x 3,7 x 2,3 m︱Documents ︱

---

Laser-Cutting-Machine BODOR - P4020 - NEWMACHINE

table length 3.000 mm︱table width 1.500 mm︱laser strength 4 kW︱Laser type IPG ︱Control BodorPro 2.0 ︱positioning accuracy 0,05 mm︱repeating accuracy 0,03 mm︱rapid traverse 140 m/min︱max. acceleration 1,5 G︱max. table load 900 kg︱total power requirement - kW︱weight of the machine ca. 11,0 t︱dimensions of the machine ca. 12,0 x 3,7 x 2,3 m︱Documents ︱

---

Laser-Cutting-Machine BODOR - P3015 - NEWMACHINE

table length 3.000 mm︱table width 1.500 mm︱laser strength 3 kW︱Laser type IPG ︱Control BodorPro 2.0 ︱positioning accuracy 0,05 mm︱repeating accuracy 0,03 mm︱rapid traverse 140 m/min︱max. acceleration 1,5 G︱max. table load 900 kg︱total power requirement - kW︱weight of the machine ca. 11,0 t︱dimensions of the machine ca. 12,0 x 3,7 x 2,3 m︱Documents ︱

---

Laser-Cutting-Machine BODOR - P3015 - NEWMACHINE

table length 3.000 mm︱table width 1.500 mm︱laser strength 2 kW︱Laser type IPG ︱Control BodorPro 2.0 ︱positioning accuracy 0,05 mm︱repeating accuracy 0,03 mm︱rapid traverse 140 m/min︱max. acceleration 1,5 G︱max. table load 900 kg︱total power requirement - kW︱weight of the machine ca. 11,0 t︱dimensions of the machine ca. 12,0 x 3,7 x 2,3 m︱Documents ︱

---

Laser-Cutting-Machine BODOR - P3015 - NEWMACHINE

Laser type YLR-CW-500W Faserlaser︱work piece lenght 1.070 nm︱Capacity 500 Watt︱control CypCut ︱max. workpiece sizes 600 x 600 mm︱Positioning speed max. 30 m/min︱cutting speed <= 160 mm/sec︱Cutting depth <=6 mm︱travel -x axis 600 mm︱travel -y axis 600 mm︱travel -z axis 50 mm︱positioning accuracy X/Y: +/- 0,03 mm︱positioning accuracy Z: +/- 0,02 mm︱repeating accuracy X/Y: +/- 0,02 mm︱repeating accuracy Z: +/- 0,01 mm︱connected load 400 V, 50 / 60Hz, 32 A ︱weight of the machine ca. 1,6 t︱dimensions of the machine ca. 2,10 x 1,50 x 2,10 m︱Documents ︱

---

BC cutting laser BAUBLYS - BL-1064-500P-F-C - Demonstration machine, only 250 operating hours - incl. water cooling - incl. extraction system - incl. cutting nozzles

Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 8000 W︱Movement Z 115 mm︱X-Y speed simult, max 265 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 40 mm︱Plate thickness Al. max. 25 mm︱Laser-Typ TruDisk 8001 -︱main switch on 16855 Std.︱time resonator beam on 11214 Std.︱time laser stand by 17241 Std.︱Plate thickness Co. max. 10 mm︱

---

The machine is in good condition. Standard Configuration: Machine - Closed frame with integrated cabinet - Automatic longitudinal pallet changer - Axis drive by linear motor technology and Torque motor - Optical fiber laser beam transmission - Machine cooling group (water-air) - Built-in electrical cabinets with interior lighting - Single electric switch for machine and laser - Longitudinal chip conveyor - Lighting of the work area - Positioning laser diode - Oil spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF Laser - TruDisk 5001 solid laser (5 kW) with fiber optic output - Optical fiber according to standard layout plan (laser source next to the machine) - Laser cooling unit (water-air) - Laser excitation by high-life diode module - Laser power control Laser cutting head - Universal cutting head with adaptive lens system - Strategy "one cutting head" - Protection window of the cutting head - Online control of the protection window - ControlLine Digital Control - CNC Sinumérik 840D SL - Integrated technology data (Laser table) - 17 color touch screen - Automatic shutdown - Programmable cutting gas pressure - FastLine - FlyLine - AdjustLine - Teleservice by internet - Simple Workshop Programming - Quick reproduction - ContourLine - Microweld Data transmission - USB interface - RJ45 card for network connection Security - CE certifications - Optical safety barriers - compartmented suction device - Compact dust collector - Machine cab with certified safety glass (right door) - Electric sunroof Options - Solid-state laser TruDisk 8001 with 1 laser output (includes BrightLine fiber, Smart Beam Control, Cutting package Highspeed and Performance package) - Smart Nozzle Automation (contains nozzle changer, nozzle inspection and smart skip) - Highspeed Eco - CoolLine - DetectLine - Wide transverse conveyor belt with tilt container (container on the right side of the machine) - Door window on left side for better insight - Integrated video camera 1 for process monitoring single picture transimission to network (view on first 2,5m) - Integrated video camera 2 for process monitoring single picture transmission to network (view on remaining work area) (only in combination with integrated video camera 1) - Drop&Cut (only in combination with the integrated video camera 1 or integrated video camera 1 and 2) - CO2 extinguishing device for compact dust extractor - Right-installation position machine This product is subject to US Export Control - ECCN 6A005. No reexport without permission of US government.

Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 6000 W︱Movement Z 115 mm︱X-Y speed simult, max 235 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 25 mm︱Plate thickness Al. max. 25 mm︱Laser-Typ TruDisk 6001 -︱main switch on 16000 Std.︱time resonator beam on 10422 Std.︱time laser stand by 15906 Std.︱Plate thickness Co. max. 10 mm︱

---

The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. Standardequipment machine: - closed machine frame with integrated laser unit, - movement unit for highly accurate processing, - Toryue-drive in combination with linear direct drive, - closed beam line, - a cutting head strategy, - cooling unit, - automatic pallet-changer in the longitudinal direction, - Conveyor, - 17" touch colour screen, - Work space lighting, - position laser diode, - spray device, - PierceLine, - NitroLine, - PlasmaLine Cutting head - LensLine, - Lens cutting head with 250mm focal length, - ControlLine Control - workshop programming, - simple workshop programming dir. Of DXF, - integrated technology files, - shutdown, - production plan, - programmable cutting gas pressure selection, - SprintLine, - ContourLine, - Microweld, - FastLine, - AdjustLine, - Teleservice, - diagnostic functions, - online-help, - FlyLine Date transmission - USB-interface, - RJ-45 network, Safety - CE-identification, - light barriers, - laser monitoring system, - more chambers extraction plant, - compact dust, - machine-cladding with Makrolon panels Additional equipment: + TruDisk 6001 + Nozzle changer + Copper cutting package + Messig cutting package + BrightLine fiber + CoolLine + Adjustment of the machine to ambient temperature up to 43 ° C + Drop & Cut + Smart collision prevention

---

THE NEW STANDARD IN LASER CUTTING MACHINESAMADA, a worldwide laser machine pioneer, has developed a new highly tuned, direct drive laser cutting machine, the LCG-3015. This machine delivers higher speed and faster acceleration processing by utilizing a carriage with a lower centre of gravity and the latest motion system incorporating high torque motors and helical rack drives. Combined with a CO2 oscillator designed with a cutting mode similar to a fibre laser, the LCG-3015 enhances processing speedsand productivity in the thin to medium thick material range.

---

- Available in models 3015, 4020, 6520, 8020 and 12020. This means that sheet metal up to 12 × 2 meters in format can be processed quickly and economically- Unparalleled high parts production and first-class cutting quality for thin to medium thick sheet metal, depending on laser power- Additional functions (Power Cut Fiber, Cut Control Fiber, Nozzle Changer, Detection Eye) and automation options increase the application scope to a maximum- Low operating costs since minimal energy is used and no laser gas is required- High flexibility. Even non-ferrous metals can be processed with excellent quality

1.070 - 1.080 nm︱ 5,0 kHz︱ 45,0 kWh︱ 12,0 mm︱ 6,0 mm︱ 6,0 mm︱ 3.060 mm︱ 1.550 mm︱ 200 mm︱ 3.000 x 1.500 mm︱ 1.000 kg︱ 10.150 x 4.050 x 2.420 mm︱ 12.000 kg︱

---

Fiber laser HESSE HDFL made by DURMA Operating hours: ca. 5.900 hrs. Cutting hours: ca. 845 hrs. The machine consists of the following components: capsuled cutting room with safety glass -X-axis with massive gantry-drive by SIEMENS linear motors -Y-axis by SIEMENS linear motors scrap conveyor for small parts and waste  shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time CNC graphic control SIEMENS Sinumerik 840D with touchscreen  (Made in Germany!) - technology and cutting parameter data bank with presettings for common metals laser source IPG YAG-2000 (Made in Germany!) autofocus-cutting head PRECITEC with integrated and adjusted sensor technics and mororized focus position adjustment (Made in Germany!) exhaust unit with filters  liquid cooler for cutting head and resonator liquid cooler for linear motors CAD/CAM software LANTEK to program and optimize utilization of material (nesting) remote maintenance by LAN connection safety light barrier covering The folowing points were rebuilt or renewed: 12 pcs. new Bosch TK guide carts, cutting head rebuilt by manufacturer Precitec and installed on machine, new air and water hoses. We would be glad to give you a demonstration in our machine exhibition in Wr.Neudorf ! (Appointment arrangement necessary.) operating hours: ca. 5.900 hrs. cutting hours: ca. 845 hrs. cutting area: 3.060 x 1.550 laser power: 0,2 - 2,0 kW wavelength: 1.070 - 1.080 nm polarization: random max. pulse frequency: 5,0 kHz average power consumption: 45,0 kWh application range: mild steel: 12,0 mm stainless steel: 6,0 mm aluminium: 6,0 mm working range: x-axis: 3.060 mm y-axis: 1.550 mm z-axis: 200 mm max. sheet size: 3.000 x 1.500 mm max. sheet weight: 1.000 kg dynamic and precision: max speed x- and y- axes: 160 m/min max. spped simultaneous: 226 m/min max. acceleration: 25 m/s² positional accuracy: +/- 0,03 mm repeatability: +/- 0,03 mm dimensions: lay-out area: 10.150 x 4.050 x 2.420 mm weight: 12.000 kg

Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 5000 W︱Movement Z 115 mm︱X speed max. 200 m/min︱Y speed max. 200 m/min︱Z speed max. 200 m/min︱X-Y speed simult, max 300 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 15 mm︱Laser-Typ TruDisk 5001 -︱main switch on 43580 Std.︱time laser stand by 17594 Std.︱Plate thickness Co. max. 8 mm︱

---

The machine is in good condition. Standard configuration Machine - Working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable laser light cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Power supply for TruDisk by the machine - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 5001 with 1 laser output - 1 fiber optic cable according standard layout (laser next to machine) - Chiller for laser cooling - Excitation by pumping diodes - Laser power control Cutting head Cutting unit - Universal Cutting unit with complete adaptive lense system - Single cutting head strategy - Protection glass to avoid lense contamination - Protection glass monitoring - ControlLine: automatic height control and sheet edge detection Control - TruTops Laser via network access (PC provided by the customer) - Easy Shop floor programming - Fast Re-production - Control Sinumerik 840D SL - 17" Touch screen - Integrated technology tables - Automatic shut-down device - Programmable cutting gas pressure - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice - Integrated e-shop Data transmission - USB-interface - RJ45 network connection Safety - CE label - Light barriers - Multi chamber exhaust system - Compact dust extractor - Machine enclosure with certificated window (right door) - Electrical curl up roof Machine options: + MDE interface + Storage interface +LiftMaster

Max. diameter round tubes 220 mm︱Max. side length rectangular tubes 200 mm︱Max. tube length loading 8.500 mm︱Max. tube length unloading 6.500 mm︱Max. tube weight 35 kg/m︱control Siemens Sinumerik 840 D ︱laser capacity in Watt 3500 ︱

---

Laser source: ROFIN SINAR DC 035 3500 Watt The LT8 system is equipped with a Rofin Sinar Slab laser from the DC series, which, thanks to the following features, enables optimum cutting quality at low operating costs: - High radiation index (K factor> 0.9) - No moving parts, therefore very low maintenance costs - Minimal gas and electricity consumption. Control Siemens Sinumerik 840D Solution Line Tube parameters - Max. diameter round tubes: 220 mm - Max. side length rectangular tubes: 200 mm - Max. tube length loading: 8.500 mm - Max. tube length unloading: 6.500 mm - Max. tube weight: 35 kg/m Seamline detection The LT8 is equipped with optical seamline detection for the correct positioning of the machining. Irregular cross sections and open profiles Thanks to the effective and efficient processing of irregular cross sections and open profiles, LT8 is also suitable for innovative applications. Booster Inspection and management of the cutting process are also guaranteed with the LT8 by means of highly developed devices - including the booster device for optimal laser piercing. 3D With large pipes, three-dimensional machining is a decisive criterion for the performance of a system. The LT8 has a 3D head for angle cutting with the highest quality and accuracy. Technological database LT8 users can rely on a complete, reliable and based on ADIGE's many years of experience in laser cutting technological database benefit from cutting parameters. Nesting Thanks to special functions such as online nesting, remnant optimization and reduction and entire bar processing, the bar is used optimally. 2 IN Two different loading stations guarantee more flexibility in the management of production lots. The system can be set up for processing open profiles and flat material in an automatic process; Two automatic loading stations, front and rear, both equipped with measuring sensors; Three possible loading designs available (bulk loader, loading table for individually manually stored bars, step loader). Each loader can be connected to any tube loading station and is available in the 8500 mm version; Two different cross-sections can be managed simultaneously using the by-pass function; There are additional protective elements in the machine for processing heavy pipes or stainless steels provided to avoid possible damage to the pipe surface. 4 OUT Four unloading positions for separate unloading of the cut pieces. The use of specially developed software processes allows the rod to be optimized and used, thereby reducing the final waste to only 110 mm. Four possible unloading positions for sorting out the different cut parts. Parts are supported by universal supports at every production step - for extremely precise machining even of long, heavy and / or complex parts. Reduced cycle times and intactness of the pipe surface are guaranteed by the special extraction pliers on the unloader. Machine hours: approx. 46.000 h / 23.000 h (June 2020)

table length / mm︱table width / mm︱burner heads / ︱DESIGN -CUTTING SYSTEM- ︱- throat depth 3000 mm︱- distance between columns (H-frame) 1500 mm︱WORKING RANGE -CUTTING MACHINE- ︱- laser capacity 2000 W︱- number of processing axes (excl parallel axes) 4 ︱- X-axis travel 3050 mm︱- Y-axis travel 1530 mm︱- z-axis travel (vertical) 150 mm︱- sheet thickness max. (alumina) 8 mm︱- workpiece load (max) 1500 kg︱ELECTRICAL SPECIFICATIONS ︱- total power consumption 30 kW︱- mains voltage 400 V︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 8935 mm︱- space requirements -front/back- 3180 mm︱

---

Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 5000 W︱Movement Z 115 mm︱X speed max. 200 m/min︱Y speed max. 200 m/min︱Z speed max. 200 m/min︱X-Y speed simult, max 300 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 15 mm︱Laser-Typ TruDisk 5000 -︱main switch on 45607 Std.︱time resonator beam on 19459 Std.︱time laser stand by 48225 Std.︱Plate thickness Co. max. 8 mm︱

---

The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. Standard configuration Machine - Working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable laser light cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Power supply for TruDisk by the machine - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 5001 with 1 laser output - 1 fiber optic cable according standard layout (laser next to machine) - Chiller for laser cooling - Excitation by pumping diodes - Laser power control Cutting head Cutting unit - Universal Cutting unit with complete adaptive lense system - Single cutting head strategy - Protection glass to avoid lense contamination - Protection glass monitoring - ControlLine: automatic height control and sheet edge detection Control - TruTops Laser via network access (PC provided by the customer) - Easy Shop floor programming - Fast Re-production - Control Sinumerik 840D SL - 17" Touch screen - Integrated technology tables - Automatic shut-down device - Programmable cutting gas pressure - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice - Integrated e-shop Data transmission - USB-interface - RJ45 network connection Safety - CE label - Light barriers - Multi chamber exhaust system - Compact dust extractor - Machine enclosure with certificated window (right door) - Electrical curl up roof Machine options: + Liftmaster

Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 5000 W︱Movement Z 115 mm︱X speed max. 200 m/min︱Y speed max. 200 m/min︱Z speed max. 200 m/min︱X-Y speed simult, max 300 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 20 mm︱Laser-Typ TruDisk 5001 -︱main switch on 37009 Std.︱time laser stand by 19831 Std.︱Plate thickness Co. max. 10 mm︱

---

The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. Standard configuration Machine - Working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable laser light cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Power supply for TruDisk by the machine - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 5001 with 1 laser output - 1 fiber optic cable according standard layout (laser next to machine) - Chiller for laser cooling - Excitation by pumping diodes - Laser power control Cutting head Cutting unit - Universal Cutting unit with complete adaptive lense system - Single cutting head strategy - Protection glass to avoid lense contamination - Protection glass monitoring - ControlLine: automatic height control and sheet edge detection Control - TruTops Laser via network access (PC provided by the customer) - Easy Shop floor programming - Fast Re-production - Control Sinumerik 840D SL - 17" Touch screen - Integrated technology tables - Automatic shut-down device - Programmable cutting gas pressure - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice - Integrated e-shop Data transmission - USB-interface - RJ45 network connection Safety - CE label - Light barriers - Multi chamber exhaust system - Compact dust extractor - Machine enclosure with certificated window (right door) - Electrical curl up roof Machine options: - Copper cutting package - Clamps (2 pcs.) - Door window on left side This product is subject to US Export Control - ECCN 6A005. No reexport without permission of US government.

Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 3000 W︱Movement Z 115 mm︱X-Y speed simult, max 140 m/min︱Plate thickness MS. max. 20 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 15 mm︱Plate thickness Al. max. 15 mm︱Laser-Typ TruDisk 3001 -︱main switch on 37280 Std.︱time resonator beam on 18077 Std.︱time laser stand by 37966 Std.︱Plate thickness Co. max. 6 mm︱

---

The machine is in good condition. Basic equipment: MACHINE - Closed frame with integrated blind cabinet - Automatic longitudinal pallet changer - Axis drive by linear motor technology and Torque - Optical fiber laser beam transmission - Cooling group - Built-in electrical cabinets with interior lighting - Longitudinal chip conveyor - Lighting of the work area - Positioning laser diode - Oil spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning LASER TRUMPF - Laser excitation by high-life diode module - Laser power control LASER CUTTING HEAD - Universal cutting head - Strategy a single cutting head - Protection window of the cutting head - Monitoring of the protection window - ControlLine DIGITAL CONTROL - CNC Sinumérik 840D SL - Integrated technology data (laser board) - 17 "color touch screen - Automatic shutdown - Programmable cutting gas pressure - FastLine - FlyLine - AdjustLine - Teleservice by internet - ContourLine - Microweld - Simple Workshop Programming - Quick reproduction DATA TRANSMISSION - USB interface - RJ45 card for network connection SECURITY - CE certifications - Optical safety barriers - compartmented suction device - Compact dust collector - Machine cab with certified safety glass (right door) - Sliding sunroof Options: - Automatic nozzle changer - Package for cutting copper (includes cutting data N2 and O2) - Package for cutting brass (includes cutting data N2) - Cross conveyor with tray on the right side of the machine - Brushes for sheet cleaning - Certified protective glass on the left door - Integrated camera (full HD) for process observation with network video interface - MDE interface - Basic body of the LiftMaster including: * unloading by forks (distance between the forks 67 mm, interchangeable forks) * vacuum lifter * stripping device & double sheet sensor * symmetrical layout . * loading on the right or on the left - Device for separating thin sheets (from 0.8 to 2 mm) - Unloading table - Precise unloading without scratches (incl. Unloading rakes in stainless steel, distance between the forks 67 mm; up to s = 15 mm) - 3rd position - 180 ° extension of the rotation angle - SortMaster (AL28), device for unloading and sorting individual pieces up to 100 kg. including: * 144 suction cups for parts dimensions 600 x 600 mm * gripper extension for parts up to 1000 x 600 mm * adjustable suction gripper (for parts up to 1000 x 1500 mm) * detector plate for filmed sheets * cleaning station for gripper and brushes * unloading platform with bin for small parts (according to the layout plan) * spreader beam +/- 90 ° * magnets - Mandatory safety devices in case of connection to a store - Storage interface This product is subject to US Export Control - ECCN 6A005. No reexport without permission of US government.

---

- Available in models 3015, 4020, 6520, 8020 and 12020. This means that sheet metal up to 12 × 2 meters in format can be processed quickly and economically- Unparalleled high parts production and first-class cutting quality for thin to medium thick sheet metal, depending on laser power- Additional functions (Power Cut Fiber, Cut Control Fiber, Nozzle Changer, Detection Eye) and automation options increase the application scope to a maximum- Low operating costs since minimal energy is used and no laser gas is required- High flexibility. Even non-ferrous metals can be processed with excellent quality

table length / mm︱table width / mm︱burner heads / ︱WORKING RANGE -CUTTING MACHINE- ︱- laser capacity 5000 W︱- X-axis travel 3050 mm︱- Y-axis travel 1600 mm︱- z-axis travel (vertical) 150 mm︱- workpiece load (max) 900 kg︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 9700 mm︱- space requirements -front/back- 3600 mm︱- total height 2500 mm︱- total weight approx. 10000 kg︱

---

table length / mm︱table width / mm︱burner heads / ︱WORKING RANGE -CUTTING MACHINE- ︱- laser capacity 3500 W︱- X-axis travel 3000 mm︱- Y-axis travel 1500 mm︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 10000 mm︱- space requirements -front/back- 2840 mm︱- total height 2166 mm︱- total weight approx. 8200 kg︱

---

---

Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 5000 W︱Movement Z 115 mm︱X speed max. 100 m/min︱Y speed max. 100 m/min︱X-Y speed simult, max 140 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 12 mm︱Laser-Typ TruFlow 5000 -︱time resonator beam on 21196 Std.︱time laser stand by 45647 Std.︱

---

The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. The machine is with singel head strategy. This saves setup time and prevents the lense from polution. Also, because of the magnetic fixing, the head has more tolerance in cas of collision. Standardequipment machine: - closed machine frame with integrated laser unit, - movement unit for highly accurate processing, - Toryue-drive in combination with linear direct drive, - closed beam line, - a cutting head strategy, - cooling unit, - automatic pallet-changer in the longitudinal direction, - Conveyor, - 17" touch colour screen, - Work space lighting, - position laser diode, - spray device, - PierceLine, - NitroLine, - PlasmaLine Cutting head - LensLine, - Lens cutting head with 250mm focal length, - ControlLine Control - workshop programming, - simple workshop programming dir. Of DXF, - integrated technology files, - shutdown, - production plan, - programmable cutting gas pressure selection, - SprintLine, - ContourLine, - Microweld, - FastLine, - AdjustLine, - Teleservice, - diagnostic functions, - online-help, - FlyLine Date transmission - USB-interface, - RJ-45 network, Safety - CE-identification, - light barriers, - laser monitoring system, - more chambers extraction plant, - compact dust absorber Keller Vario T1.5, - machine-cladding with Makrolon panes Additional Accessories: + Thin material package - high speed cutting - Cutting head 130mm focus - compressed air cutting + machine prepared for Liftmaster linear

Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 6000 W︱Movement Z 115 mm︱X speed max. 200 m/min︱Y speed max. 200 m/min︱X-Y speed simult, max 300 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 15 mm︱Laser-Typ TruFlow 6000 -︱main switch on 23666 Std.︱time resonator beam on 16537 Std.︱time laser stand by 23732 Std.︱

---

The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. high dynamic machine, linear drives in Y and Z_axe, one head strategie. Basic equipment: Machine - Closed frame with integrated Laser - Displacement unit for high-precision machining - Axis drive with linear motor technology and Gantry - Protected beam guidance - Single-head machining strategy - Cooling Package - Automatic pallet changer in the longitudinal direction - Chip conveyor and small parts in the cutting area - Lighting of the work area - Positioning laser diode - An oil vaporization - PierceLine - FocusLine - NitroLine - PlasmaLine laser trumpf - CO2 laser TruFlow 6000 with "Stand-by" optimized - Radial turbine without maintenance - Excitement radio frequency - Laser control TASC 3 - Laser power control - Laser Synopsis Laser cutting head - LensLine with status check - Cutting head with focal length of 250 mm - Quick-change cutting head (UTI) - ControlLine CNC - CNC Sinumerik 840D - Integrated information technology - laser array - TFT color display - Automatic stop - Pressure Programmable cutting gas - SprintLine - ContourLine - FastLine - Microweld - Flyline - Teleservices - Integrated E-shop - Programming Workshop Data Transmission - USB interface - Card RJ45 network connection security - Certifications CE - Optical Safety Sensors - Laser monitoring device - Compartmentalized suction device - Compact Dust Collector - Cabin machine panel Makrolon Machine Options + Top cover machine (included in the package mirror cutting head for Technology) + Platform version (without steel structure) + Preparation loading device

table length 3000 mm︱table width 1500 mm︱burner heads ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

table length 2500 mm︱table width 2000 mm︱burner heads -- ︱laser capacity in Watt 100 - 1000 W︱work piece lenght 10,6 µm︱power constancy +/- 2 %︱beam diameter 14 mm︱total power requirement ca. 53 kW︱weight of the machine ca. ca. 10 t︱dimensions of the machine ca. m︱Control ︱

---