Réseau européen de revendeurs de machines de stockage

Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Metal Processing - Band Saw - Automatic - Horizontal

          Machinelist: Scie à ruban - Automatique - Horizontale


          Band Saw - Automatic - Horizontal

          Scie à bande - automatique - horizontale HUVEMA HU 320 BMSO GLH d'occasion


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010049 · Band Saw - Automatic - Horizontal

          HUVEMA - HU 320 BMSO GLH - - neu -

          Technical details
          cutting diameter 320 mm︱saw band length 3660 mm︱cutting width 350 mm︱feed in one step 600 mm︱cutting speed 20-100 m/min︱dimensions of saw-band 4160 x 27 x 0,9 mm︱work height max. 740 mm︱capacity 45 degrees: round 320 mm︱capacity 90 degrees: flat 610 x 320 mm︱hydraulic motor 1,5 kW︱feed motor 0,12 kW︱sawing motor 1,5 kW︱total power requirement 4 kW︱weight of the machine ca. 1,96 t︱dimensions of the machine ca. 2,4 x 2,4 x 1,4 m︱
            cutting diameter 320 mm
            saw band length 3660 mm
            cutting width 350 mm
            feed in one step 600 mm
            cutting speed 20-100 m/min
            dimensions of saw-band 4160 x 27 x 0,9 mm
            work height max. 740 mm
            capacity 45 degrees: round 320 mm
            capacity 90 degrees: flat 610 x 320 mm
            hydraulic motor 1,5 kW
            feed motor 0,12 kW
            sawing motor 1,5 kW
            total power requirement 4 kW
            weight of the machine ca. 1,96 t
            dimensions of the machine ca. 2,4 x 2,4 x 1,4 m
          Datasheet
          Request / Contact
          Scie à bande - automatique - horizontale HUVEMA HU 320 BMSO d'occasion


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010021 · Band Saw - Automatic - Horizontal

          HUVEMA - HU 320 BMSO - - neu -

          Technical details
          cutting diameter 320 mm︱saw band length 3660 mm︱cutting width 350 mm︱feed in one step 600 mm︱cutting speed 20-100 m/min︱total power requirement 4 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 2,1 x 2,2 x 1,4 m︱
          • Semi-automatic • the length of the saw will be adjusted manually to a back stop by limit switch
            cutting diameter 320 mm
            saw band length 3660 mm
            cutting width 350 mm
            feed in one step 600 mm
            cutting speed 20-100 m/min
            total power requirement 4 kW
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 2,1 x 2,2 x 1,4 m
            Description :
            • Semi-automatic
            • the length of the saw will be adjusted manually to a back stop by limit switch
          Datasheet
          Request / Contact
          Scie à ruban Scie automatique - horizontale BIANCO Mod. 330 AE 60 °


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051223 · Band Saw - Automatic - Horizontal

          BIANCO - Mod. 330 AE 60° - - 2020 -

          Technical details
          cutting diameter 260 mm︱saw band length 3010 x 27x 0,9 mm︱cutting width mm︱total power requirement 0,9-1,5 kW︱weight of the machine ca. 0,700 t︱dimensions of the machine ca. 2600 x 1750 x 1700 m︱
            cutting diameter 260 mm
            saw band length 3010 x 27x 0,9 mm
            total power requirement 0,9-1,5 kW
            weight of the machine ca. 0,700 t
            dimensions of the machine ca. 2600 x 1750 x 1700 m
          Datasheet
          Request / Contact
          Scie à bande - automatique - horizontale d'occasion SCAN BANCO MOD 370 AF 90 ° CNC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051225 · Band Saw - Automatic - Horizontal

          BIANCO - MOD 370 AF 90° CNC - - 2020 -

          Technical details
          cutting diameter 280 mm︱saw band length 3120 mm︱tong feed 800 mm︱work height max. 835 mm︱ 25 mm︱dimensions of saw-band 3120 x 27 x 0,9 mm︱ 280 mm︱Capacity 90° rectangular 330 x 240 mm︱ 240 x 240 mm︱total power requirement 1,5 kW︱weight of the machine ca. 945 kg︱dimensions of the machine ca. 2,8 x 1,9 x 1,9 m︱
            cutting diameter 280 mm
            saw band length 3120 mm
            tong feed 800 mm
            work height max. 835 mm
            25 mm
            dimensions of saw-band 3120 x 27 x 0,9 mm
            280 mm
            Capacity 90° rectangular 330 x 240 mm
            240 x 240 mm
            total power requirement 1,5 kW
            weight of the machine ca. 945 kg
            dimensions of the machine ca. 2,8 x 1,9 x 1,9 m
          Datasheet
          Request / Contact
          Scie à bande - automatique - horizontale Beka-Mak BMSO 320 d'occasion


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051510 · Band Saw - Automatic - Horizontal

          Beka-Mak - BMSO 320 - - 2020 -

          Technical details
          cutting diameter 320 mm︱saw band length 3660 x 27 x 0,9 mm︱cutting width 300 mm︱cutting capacity - flat 90° / 320 x 300 mm︱cutting capacity - round 90° / 320 mm︱cutting capacity - square 90° / 300 mm︱speed 20 - 100 m/min︱total power requirement 1,5 kW︱weight of the machine ca. 765 t︱dimensions of the machine ca. 1900 x 850 x 1300 m︱
          On semi-automatic models the saw arm is lifted up automatically after the sawing cycle has finished. inverter hydraulic clamping hydraulic saw blade tension adjustment automatic stop ?material transport system
            cutting diameter 320 mm
            saw band length 3660 x 27 x 0,9 mm
            cutting width 300 mm
            cutting capacity - flat 90° / 320 x 300 mm
            cutting capacity - round 90° / 320 mm
            cutting capacity - square 90° / 300 mm
            speed 20 - 100 m/min
            total power requirement 1,5 kW
            weight of the machine ca. 765 t
            dimensions of the machine ca. 1900 x 850 x 1300 m
            Description :
            On semi-automatic models the saw arm is lifted up automatically
            after the sawing cycle has finished.

            inverter
            hydraulic clamping
            hydraulic saw blade tension adjustment
            automatic stop
            ?material transport system
          9.950 €
          Datasheet
          Request / Contact
          Scie à bande - automatique - horizontale Beka-Mak BMSO 320 L d'occasion


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051513 · Band Saw - Automatic - Horizontal

          Beka-Mak - BMSO 320 L - - 2020 -

          Technical details
          cutting diameter 330 mm︱saw band length 4160 x 34 x 1,1 mm︱cutting width 320 mm︱cutting capacity - flat 90° / 500 x 320 mm︱cutting capacity - round 90° / 330 mm︱cutting capacity - square 90° / 330 x 330 mm︱speed 20 - 100 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 750 t︱dimensions of the machine ca. 2100 x 850 x 1300 m︱
          On semi-automatic models the saw arm is lifted up automatically after the sawing cycle has finished. inverter hydraulic clamping hydraulic saw blade tension adjustment automatic stop ?material transport system
            cutting diameter 330 mm
            saw band length 4160 x 34 x 1,1 mm
            cutting width 320 mm
            cutting capacity - flat 90° / 500 x 320 mm
            cutting capacity - round 90° / 330 mm
            cutting capacity - square 90° / 330 x 330 mm
            speed 20 - 100 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 750 t
            dimensions of the machine ca. 2100 x 850 x 1300 m
            Description :
            On semi-automatic models the saw arm is lifted up automatically
            after the sawing cycle has finished.

            inverter
            hydraulic clamping
            hydraulic saw blade tension adjustment
            automatic stop
            ?material transport system

          11.100 €
          Datasheet
          Request / Contact
          Scie à bande Scie automatique - horizontale BIANCO MOD. 330 AE60 CNC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051236 · Band Saw - Automatic - Horizontal

          BIANCO - MOD. 330 AE60 CNC - - 2020 -

          Technical details
          cutting diameter 260 mm︱saw band length 3010x27x0,9 mm︱cutting width mm︱band speed 20-100 m/min︱ 600 ︱work height max. 835 mm︱control ︱total power requirement 1,5 kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 2,6x1,75x1,7 m︱
            cutting diameter 260 mm
            saw band length 3010x27x0,9 mm
            band speed 20-100 m/min
            600
            work height max. 835 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. 2,6x1,75x1,7 m
          Datasheet
          Request / Contact
          Scie à ruban Scie automatique - horizontale BIANCO Mod. 420 A 60 °


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051224 · Band Saw - Automatic - Horizontal

          BIANCO - Mod. 420 A 60° - - 2020 -

          Technical details
          cutting diameter 300 mm︱saw band length 3270 x 27 x 0,9 mm︱cutting width mm︱feed per cut 800 mm︱band speed 35-70 m/min︱total power requirement 0,9-1,5 kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. 3220 x 1950 x 1990 m︱
            cutting diameter 300 mm
            saw band length 3270 x 27 x 0,9 mm
            feed per cut 800 mm
            band speed 35-70 m/min
            total power requirement 0,9-1,5 kW
            weight of the machine ca. 1 t
            dimensions of the machine ca. 3220 x 1950 x 1990 m
          Datasheet
          Request / Contact
          Scie à ruban Scies d'occasion - Automatique - Horizontale SINGULAR 30.28 A NC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051251 · Band Saw - Automatic - Horizontal

          SINGULAR - 30.28 A NC - - 2020 -

          Technical details
          cutting diameter 280 mm︱saw band length 3820 x 34 x 1,1 mm︱ 10 ︱band speed 16-85 m/min︱ 120 ︱total power requirement 3,7 kW︱weight of the machine ca. 1,75 t︱dimensions of the machine ca. 2100 x 1990 x 1300 mm︱
            cutting diameter 280 mm
            saw band length 3820 x 34 x 1,1 mm
            10
            band speed 16-85 m/min
            120
            total power requirement 3,7 kW
            weight of the machine ca. 1,75 t
            dimensions of the machine ca. 2100 x 1990 x 1300 mm
          Datasheet
          Request / Contact
          Scie à ruban Scies d'occasion - Automatique - Horizontale SINGULAR 42.42 A NC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051252 · Band Saw - Automatic - Horizontal

          SINGULAR - 42.42 A NC - - 2020 -

          Technical details
          Capacity 90° rectangular 420 x 420 mm︱cutting diameter 420 mm︱saw band length 4880 x 41 x 1,3 mm︱cutting width 420 mm︱ 10 ︱band speed 16-85 m/min︱work height max. 700 mm︱total power requirement 5,5 kW︱weight of the machine ca. 2,45 t︱dimensions of the machine ca. 2450 x 2235 x 1665 mm︱
          Heavy fully automatic NC-controlled production machine with high cutting accuracy. At only 90 ° cuts are possible with this machine. workflow After entering the required number of pieces and the section length on the display the fully automatic work cycle is started. Basic equipment - PLC controlled electrical and hydraulic functions, programming of 20 work orders possible - Stable welded construction of the saw arm enables a low-vibration Saw cut. - Powerful frequency-controlled saw band drive Hydraulically controlled lowering speed of the saw arm - Deflection wheel with speed monitoring and saw blade breakage control Hydraulic clamping of the material over two stages full stroke clampigcylinder Detection of material end - Split vise for short Remnant lengths Feed length single stroke 400 mm; Max. Feed length 3600 mm Automatic frame height adjustment, the approach to the material takes place via quick setback - Tungsten carbide saw band guides and guide rollers - Hydraulic belt tension - Bundle clamping device with quick coupling - Flush gun for cleaning the machine - Coolant pump with double feed to the saw band guides - chip conveyor - Workplace lamp Driven chip brush - Bi-metal saw band M 42 - Roller conveyor 2 meters - Machine tool in tool case
            Capacity 90° rectangular 420 x 420 mm
            cutting diameter 420 mm
            saw band length 4880 x 41 x 1,3 mm
            cutting width 420 mm
            10
            band speed 16-85 m/min
            work height max. 700 mm
            total power requirement 5,5 kW
            weight of the machine ca. 2,45 t
            dimensions of the machine ca. 2450 x 2235 x 1665 mm
            Description :
            Heavy fully automatic NC-controlled production machine with high cutting
            accuracy. At
            only 90 ° cuts are possible with this machine.

            workflow
            After entering the required number of pieces and the section length on the
            display
            the fully automatic work cycle is started.

            Basic equipment
            - PLC controlled electrical and hydraulic functions, programming of
            20 work orders possible
            - Stable welded construction of the saw arm enables a low-vibration
            Saw cut.
            - Powerful frequency-controlled saw band drive
            Hydraulically controlled lowering speed of the saw arm
            - Deflection wheel with speed monitoring and saw blade breakage control
            Hydraulic clamping of the material over two stages full stroke
            clampigcylinder
            Detection of material end
            - Split vise for short
            Remnant lengths
            Feed length single stroke 400 mm; Max. Feed length 3600 mm
            Automatic frame height adjustment, the approach to the material takes place
            via quick setback
            - Tungsten carbide saw band guides and guide rollers
            - Hydraulic belt tension
            - Bundle clamping device with quick coupling
            - Flush gun for cleaning the machine
            - Coolant pump with double feed to the saw band guides
            - chip conveyor
            - Workplace lamp
            Driven chip brush
            - Bi-metal saw band M 42
            - Roller conveyor 2 meters
            - Machine tool in tool case
          Datasheet
          Request / Contact
          Scies d'occasion Scie à ruban - Automatique - Horizontale Beka-Mak BMSO 650 CH NC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051532 · Band Saw - Automatic - Horizontal

          Beka-Mak - BMSO 650 CH NC - - 2020 -

          Technical details
          cutting diameter 650 mm︱saw band length 8400 x 54 x 1,6 mm︱cutting width 600 mm︱ 600 x 600 mm︱Capacity 90° rectangular 1050 x 600 mm︱speeds steplessly adjustable 20 - 100 m/min︱table height 825 mm︱stroke length max. 500 mm︱accuracy +/- 0,3 mm︱feed 6000 mm︱total power requirement 11,75 kW︱weight of the machine ca. 6,58 t︱dimensions of the machine ca. 4,25 x 1,75 x 2,6 m︱
          Fully automatic Linear Way for cutting solid stocks,tubes and profiles of steel , cast-iron light and nonferrous material for cutting at only 90°. Complete steel fabricated. The rear jaw contains of a number of hardened rollers driven through a worm and wheel by an electric motor.The front vice consist of a number of free running rollers.A limit switch assemebled on top the vice stops the machine when the block is exhausted. Once the work piece is clamped between the rollers no further clamping needed. The work is fed through the vice to the bar stop which contains a micro-switch controlling the bar feed motor. A piece counter controls the number of the cuts.The machines stop automatically at the blade breakage. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. Machine description : • fully automatic NC band saw for sawing thick-walled profiles and solid materials • robust constructed monoblock saw frame with hydraulic vertical motion and linear guide • Feed length in a train 500 mm • Cutting length and average number input via NC (programmable logic controller ) of " SIEMENS " for 10 different programs • continuously adjustable belt speed 20 - 100 m / min • hydraulic-mechanical belt tension • automatic machine shutdown at band breaks • accurate position measurement of the slide on magnetic scale • Sensitive cutting pressure regulation function of the material properties • Eilvorlauf the saw frame with automatic saw feed in transition ( light sensor ) • automatic Führungsarmverstellung , synchronously with hydraulic clamping of the horizontal vise • tape guide with hard metal pads sheets and rolls • automatic belt break protection • Chip brush driven by impeller Standard Features Hydraulic split vice Proximity switch for sensing blade slippage Saw Blade 41 Optical Height Adjustment Pressure Adjustment SAP Coolant Pump Security Switch Heavy Duty Gearbox Offered Hydraulic Rear Vise Hydraulic Feeding Vice PLC Control Panel Hydraulic Vice Lineer Way Synchronisation Moveable Arm/Vice Inverter Optional Features 6° inclined Blade ILC Microspray Device 3 Mt Material Roller Table Multiple Segments Hydraulic Top Clamping
            cutting diameter 650 mm
            saw band length 8400 x 54 x 1,6 mm
            cutting width 600 mm
            600 x 600 mm
            Capacity 90° rectangular 1050 x 600 mm
            speeds steplessly adjustable 20 - 100 m/min
            table height 825 mm
            stroke length max. 500 mm
            accuracy +/- 0,3 mm
            feed 6000 mm
            total power requirement 11,75 kW
            weight of the machine ca. 6,58 t
            dimensions of the machine ca. 4,25 x 1,75 x 2,6 m
            Description :
            Fully automatic Linear Way for cutting solid stocks,tubes and profiles of steel
            , cast-iron light and nonferrous material for cutting at only 90°. Complete
            steel fabricated. The rear jaw contains of a number of hardened rollers driven
            through a worm and wheel by an electric motor.The front vice consist of a
            number of free running rollers.A limit switch assemebled on top the vice stops
            the machine when the block is exhausted. Once the work piece is clamped between
            the rollers no further clamping needed. The work is fed through the vice to the
            bar stop which contains a micro-switch controlling the bar feed motor. A piece
            counter controls the number of the cuts.The machines stop automatically at the
            blade breakage. The machines are fitted with a removable coolant tank
            incorporating a submerged electric coolant pump which supplies coolant to both
            guide assemblies.
            Machine description :
            • fully automatic NC band saw for sawing thick-walled profiles and solid
            materials
            • robust constructed monoblock saw frame with hydraulic vertical motion and
            linear guide
            • Feed length in a train 500 mm
            • Cutting length and average number input via NC (programmable logic controller
            ) of " SIEMENS " for
            10 different programs
            • continuously adjustable belt speed 20 - 100 m / min
            • hydraulic-mechanical belt tension
            • automatic machine shutdown at band breaks
            • accurate position measurement of the slide on magnetic scale
            • Sensitive cutting pressure regulation function of the material properties
            • Eilvorlauf the saw frame with automatic saw feed in transition ( light sensor
            )
            • automatic Führungsarmverstellung , synchronously with hydraulic clamping of
            the horizontal vise
            • tape guide with hard metal pads sheets and rolls
            • automatic belt break protection
            • Chip brush driven by impeller


            Standard Features

            Hydraulic split vice
            Proximity switch for sensing blade slippage
            Saw Blade 41
            Optical Height Adjustment
            Pressure Adjustment
            SAP Coolant Pump
            Security Switch
            Heavy Duty Gearbox
            Offered Hydraulic Rear Vise
            Hydraulic Feeding Vice
            PLC Control Panel
            Hydraulic Vice
            Lineer Way
            Synchronisation Moveable Arm/Vice
            Inverter


            Optional Features
            6° inclined Blade
            ILC Microspray Device
            3 Mt Material Roller Table
            Multiple Segments
            Hydraulic Top Clamping



          Datasheet
          Request / Contact
          Scies d'occasion Scie à ruban - Automatique - Horizontale Beka-Mak BMSO 320 GS NC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051514 · Band Saw - Automatic - Horizontal

          Beka-Mak - BMSO 320 GS NC - - 2020 -

          Technical details
          cutting diameter 320 mm︱saw band length 3660 x 27 x 0,9 mm︱cutting width 350 mm︱Capacity 90° rectangular 350 x 320 mm︱ 320 mm︱ 260 mm︱ 180 mm︱ 250 x 180 mm︱ 160 mm︱ 150 x 150 mm︱speeds steplessly adjustable 20 - 100 m/min︱ 180 x 180 mm︱work height max. 740 mm︱total power requirement 3,42 kW︱weight of the machine ca. 2,31 t︱dimensions of the machine ca. 2100 x 2100 x 1810 m︱
          On semi-automatic models the saw arm is lifted up automatically after the sawing cycle has finished. inverter hydraulic clamping hydraulic saw blade tension adjustment automatic stop ?material transport system
            cutting diameter 320 mm
            saw band length 3660 x 27 x 0,9 mm
            cutting width 350 mm
            Capacity 90° rectangular 350 x 320 mm
            320 mm
            260 mm
            180 mm
            250 x 180 mm
            160 mm
            150 x 150 mm
            speeds steplessly adjustable 20 - 100 m/min
            180 x 180 mm
            work height max. 740 mm
            total power requirement 3,42 kW
            weight of the machine ca. 2,31 t
            dimensions of the machine ca. 2100 x 2100 x 1810 m
            Description :
            On semi-automatic models the saw arm is lifted up automatically
            after the sawing cycle has finished.

            inverter
            hydraulic clamping
            hydraulic saw blade tension adjustment
            automatic stop
            ?material transport system

          11.100 €
          Datasheet
          Request / Contact
          Scie à bande - automatique - horizontale Beka-Mak BMSO 360 C d'occasion


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051524 · Band Saw - Automatic - Horizontal

          Beka-Mak - BMSO 360 C - - 2020 -

          Technical details
          cutting diameter 380 mm︱saw band length 4800 x 34 x 1,1 mm︱cutting width 430 mm︱ 380 mm︱Capacity 90° rectangular 430 x 380 mm︱cutting speed 20 - 100 m/min︱total power requirement 3,67 kW︱weight of the machine ca. 1,342 t︱dimensions of the machine ca. 2,9 x 0,85 x 1,66 m︱
          Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop automatically. The machines are fitted with an integrated coolant pump with a removable coolant tank, which supplies coolant to both guide assemblies.
            cutting diameter 380 mm
            saw band length 4800 x 34 x 1,1 mm
            cutting width 430 mm
            380 mm
            Capacity 90° rectangular 430 x 380 mm
            cutting speed 20 - 100 m/min
            total power requirement 3,67 kW
            weight of the machine ca. 1,342 t
            dimensions of the machine ca. 2,9 x 0,85 x 1,66 m
            Description :
            Fully automatic band saw for cutting solid material, tubes and profiles of steel,
            cast-iron, light and non ferrous materials, at 90°. Entirely made of steel.
            The rear jaw of the hydraulic vice has a number of hardened rollers that are
            turned by an electric motor. The front jaw consist of a number of free running
            rollers. Once the work piece is clamped between the rollers no further clamping
            is needed. The material is fed through the vice to the material stop which
            contains a micro-switch controlling the feed motor. A counter controls the number
            of cuts. Should the blade brake the machines stop automatically. The machines
            are fitted with an integrated coolant pump with a removable coolant tank, which
            supplies coolant to both guide assemblies.
          17.100 €
          Datasheet
          Request / Contact
          Scie à bande - automatique - horizontale Beka-Mak BMSO 325 C d'occasion


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051520 · Band Saw - Automatic - Horizontal

          Beka-Mak - BMSO 325 C - - 2020 -

          Technical details
          cutting diameter 325 mm︱saw band length 4160 mm︱cutting width 350 mm︱ 325 mm︱ 325 x 325 mm︱Capacity 90° rectangular 325 x 325 mm︱speed 20 -100 m/min︱main drive 3 kW︱hydraulic pump 0,55 kW︱coolant pump 0,12 kW︱dimensions of saw-band 4160 x 34 x 1,1 mm︱work height max. 580 mm︱total power requirement 2,9 kW︱weight of the machine ca. 1030 kg︱dimensions of the machine ca. 2,45 x 0,9 x 1,5 m︱
          Product Description Fully automatic Linear Way for cutting solid stocks,tubes and profiles of steel, cast-iron light and nonferrous material for cutting at only 90°. Complete steel fabricated. The rear jaw contains of a number of hardened rollers driven through a worm and wheel by an electric motor.The front vice consist of a number of free running rollers.A limit switch assemebled on top the vice stops the machine when the block is exhausted. Once the work piece is clamped between the rollers no further clamping needed. The work is fed through the vice to the bar stop which contains a micro-switch controlling the bar feed motor. A piece counter controls the number of the cuts.The machines stop automatically at the blade breakage. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. Bi-Metal sawblade and 1,2 meters infeed roller table are supplied as standart. Standard Features: Saw Blade 34 Moveable Arm/Vice Inverter Security Switch Hydromecanic Blade Tension Saw Blade Brash Lineer Way Metarial Limit Shaft Hydraulic Vice Control Panel Mechanic Top Clamping Heavy Duty Gearbox Optical Height Adjustment Pressure Adjustment SAP Coolant Pump 1,2 mt Roller Table Optional Features Chip Conveyor 3 Mt Material Roller Table Hydraulic Blade Tension ILC Microspray Device
            cutting diameter 325 mm
            saw band length 4160 mm
            cutting width 350 mm
            325 mm
            325 x 325 mm
            Capacity 90° rectangular 325 x 325 mm
            speed 20 -100 m/min
            main drive 3 kW
            hydraulic pump 0,55 kW
            coolant pump 0,12 kW
            dimensions of saw-band 4160 x 34 x 1,1 mm
            work height max. 580 mm
            total power requirement 2,9 kW
            weight of the machine ca. 1030 kg
            dimensions of the machine ca. 2,45 x 0,9 x 1,5 m
            Description :
            Product Description
            Fully automatic Linear Way for cutting solid stocks,tubes and profiles of
            steel, cast-iron light and nonferrous material for cutting at only 90°.
            Complete steel fabricated. The rear jaw contains of a number of hardened
            rollers driven through a worm and wheel by an electric motor.The front vice
            consist of a number of free running rollers.A limit switch assemebled on top
            the vice stops the machine when the block is exhausted. Once the work piece is
            clamped between the rollers no further clamping needed. The work is fed through
            the vice to the bar stop which contains a micro-switch controlling the bar feed
            motor. A piece counter controls the number of the cuts.The machines stop
            automatically at the blade breakage. The machines are fitted with a removable
            coolant tank incorporating a submerged electric coolant pump which supplies
            coolant to both guide assemblies. Bi-Metal sawblade and 1,2 meters infeed
            roller table are supplied as standart.

            Standard Features:
            Saw Blade 34
            Moveable Arm/Vice
            Inverter
            Security Switch
            Hydromecanic Blade Tension
            Saw Blade Brash
            Lineer Way
            Metarial Limit Shaft
            Hydraulic Vice
            Control Panel
            Mechanic Top Clamping
            Heavy Duty Gearbox
            Optical Height Adjustment
            Pressure Adjustment
            SAP Coolant Pump
            1,2 mt Roller Table


            Optional Features

            Chip Conveyor
            3 Mt Material Roller Table
            Hydraulic Blade Tension
            ILC Microspray Device
          14.100 €
          Datasheet
          Request / Contact
          Scies d'occasion Scie à ruban - Automatique - Horizontale Beka-Mak BMSO 650 CS NC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051533 · Band Saw - Automatic - Horizontal

          Beka-Mak - BMSO 650 CS NC - - 2020 -

          Technical details
          cutting diameter 650 mm︱saw band length 8400 x 54 x 1,6 mm︱cutting width 600 mm︱ 600 x 600 mm︱Capacity 90° rectangular 1050 x 600 mm︱speeds steplessly adjustable 20 - 100 m/min︱table height 825 mm︱stroke length max. 700 mm︱accuracy +/- 0,1 mm︱feed 9999 mm︱total power requirement 11,75 kW︱weight of the machine ca. 6,58 t︱dimensions of the machine ca. 4,25 x 1,75 x 2,6 m︱
          Fully automatic Linear Way for cutting solid stocks,tubes and profiles of steel , cast-iron light and nonferrous material for cutting at only 90°. Complete steel fabricated. The rear jaw contains of a number of hardened rollers driven through a worm and wheel by an electric motor.The front vice consist of a number of free running rollers.A limit switch assemebled on top the vice stops the machine when the block is exhausted. Once the work piece is clamped between the rollers no further clamping needed. The work is fed through the vice to the bar stop which contains a micro-switch controlling the bar feed motor. A piece counter controls the number of the cuts.The machines stop automatically at the blade breakage. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. Machine description : • fully automatic NC band saw for sawing thick-walled profiles and solid materials • robust constructed monoblock saw frame with hydraulic vertical motion and linear guide • Feed length in a train 500 mm • Cutting length and average number input via NC (programmable logic controller ) of " SIEMENS " for 10 different programs • continuously adjustable belt speed 20 - 100 m / min • hydraulic-mechanical belt tension • automatic machine shutdown at band breaks • accurate position measurement of the slide on magnetic scale • Sensitive cutting pressure regulation function of the material properties • Eilvorlauf the saw frame with automatic saw feed in transition ( light sensor ) • automatic Führungsarmverstellung , synchronously with hydraulic clamping of the horizontal vise • tape guide with hard metal pads sheets and rolls • automatic belt break protection • Chip brush driven by impeller Standard Features Hydraulic split vice Proximity switch for sensing blade slippage Saw Blade 41 Optical Height Adjustment Pressure Adjustment SAP Coolant Pump Security Switch Heavy Duty Gearbox Offered Hydraulic Rear Vise Hydraulic Feeding Vice PLC Control Panel Hydraulic Vice Lineer Way Synchronisation Moveable Arm/Vice Inverter Optional Features 6° inclined Blade ILC Microspray Device 3 Mt Material Roller Table Multiple Segments Hydraulic Top Clamping
            cutting diameter 650 mm
            saw band length 8400 x 54 x 1,6 mm
            cutting width 600 mm
            600 x 600 mm
            Capacity 90° rectangular 1050 x 600 mm
            speeds steplessly adjustable 20 - 100 m/min
            table height 825 mm
            stroke length max. 700 mm
            accuracy +/- 0,1 mm
            feed 9999 mm
            total power requirement 11,75 kW
            weight of the machine ca. 6,58 t
            dimensions of the machine ca. 4,25 x 1,75 x 2,6 m
            Description :
            Fully automatic Linear Way for cutting solid stocks,tubes and profiles of steel
            , cast-iron light and nonferrous material for cutting at only 90°. Complete
            steel fabricated. The rear jaw contains of a number of hardened rollers driven
            through a worm and wheel by an electric motor.The front vice consist of a
            number of free running rollers.A limit switch assemebled on top the vice stops
            the machine when the block is exhausted. Once the work piece is clamped between
            the rollers no further clamping needed. The work is fed through the vice to the
            bar stop which contains a micro-switch controlling the bar feed motor. A piece
            counter controls the number of the cuts.The machines stop automatically at the
            blade breakage. The machines are fitted with a removable coolant tank
            incorporating a submerged electric coolant pump which supplies coolant to both
            guide assemblies.
            Machine description :
            • fully automatic NC band saw for sawing thick-walled profiles and solid
            materials
            • robust constructed monoblock saw frame with hydraulic vertical motion and
            linear guide
            • Feed length in a train 500 mm
            • Cutting length and average number input via NC (programmable logic controller
            ) of " SIEMENS " for
            10 different programs
            • continuously adjustable belt speed 20 - 100 m / min
            • hydraulic-mechanical belt tension
            • automatic machine shutdown at band breaks
            • accurate position measurement of the slide on magnetic scale
            • Sensitive cutting pressure regulation function of the material properties
            • Eilvorlauf the saw frame with automatic saw feed in transition ( light sensor
            )
            • automatic Führungsarmverstellung , synchronously with hydraulic clamping of
            the horizontal vise
            • tape guide with hard metal pads sheets and rolls
            • automatic belt break protection
            • Chip brush driven by impeller


            Standard Features

            Hydraulic split vice
            Proximity switch for sensing blade slippage
            Saw Blade 41
            Optical Height Adjustment
            Pressure Adjustment
            SAP Coolant Pump
            Security Switch
            Heavy Duty Gearbox
            Offered Hydraulic Rear Vise
            Hydraulic Feeding Vice
            PLC Control Panel
            Hydraulic Vice
            Lineer Way
            Synchronisation Moveable Arm/Vice
            Inverter


            Optional Features
            6° inclined Blade
            ILC Microspray Device
            3 Mt Material Roller Table
            Multiple Segments
            Hydraulic Top Clamping



          Datasheet
          Request / Contact
          Scie à bande - automatique - horizontale Beka-Mak BMSO 230 d'occasion


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051508 · Band Saw - Automatic - Horizontal

          Beka-Mak - BMSO 230 - - 2020 -

          Technical details
          cutting diameter 230 mm︱saw band length 2730 x 27 x 0,9 mm︱cutting width 130 mm︱cutting capacity - flat 90° / 320 x 130 mm︱cutting capacity - round 90° / 230 mm︱cutting capacity - square 90° / 230 x 230 mm︱speed 35 - 70 m/min︱total power requirement 1,0 - 1,3 kW︱weight of the machine ca. 530 t︱dimensions of the machine ca. 1,7 x 0,8 x 1,16 m︱
          The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small production lines. separate control panel sawing pressure hydraulically adjustable with cooling system easily moveable with stop gear wheel driven left – right mitre sawing
            cutting diameter 230 mm
            saw band length 2730 x 27 x 0,9 mm
            cutting width 130 mm
            cutting capacity - flat 90° / 320 x 130 mm
            cutting capacity - round 90° / 230 mm
            cutting capacity - square 90° / 230 x 230 mm
            speed 35 - 70 m/min
            total power requirement 1,0 - 1,3 kW
            weight of the machine ca. 530 t
            dimensions of the machine ca. 1,7 x 0,8 x 1,16 m
            Description :
            The HU 230 DG is a popular sawing machine and is heavily sold, due to its
            favourable price-quality relation. With adjustable sawing pressure, coolant
            pump with reservoir and electrical-mechanical saw blade tension adjustment,
            this machine is ideal for large workshops and small production lines.

            separate control panel
            sawing pressure hydraulically adjustable
            with cooling system
            easily moveable
            with stop
            gear wheel driven
            left – right mitre sawing

          8.150 €
          Datasheet
          Request / Contact
          Scie à ruban Scie automatique - horizontale BIANCO Mod. 330 AE 60 ° CNC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051226 · Band Saw - Automatic - Horizontal

          BIANCO - Mod. 330 AE 60° CNC - - 2020 -

          Technical details
          cutting diameter 260 mm︱saw band length 3010 x 27x 0,9 mm︱cutting width 330 mm︱capacity 90 degrees: flat 330 x 140 mm︱ 220 x 220 mm︱ 200 mm︱capacity 45 degrees: I horizontal 200 x 130 mm︱ 190 x 190 mm︱ 120 mm︱ 120 x 100 mm︱ 115 x 115 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,700 t︱dimensions of the machine ca. 2600 x 1750 x 1700 m︱
            cutting diameter 260 mm
            saw band length 3010 x 27x 0,9 mm
            cutting width 330 mm
            capacity 90 degrees: flat 330 x 140 mm
            220 x 220 mm
            200 mm
            capacity 45 degrees: I horizonta. 200 x 130 mm
            190 x 190 mm
            120 mm
            120 x 100 mm
            115 x 115 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,700 t
            dimensions of the machine ca. 2600 x 1750 x 1700 m
          Datasheet
          Request / Contact
          Scies d'occasion Scie à ruban - Automatique - Horizontale Beka-Mak BMSO 360 CGH NC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-051531 · Band Saw - Automatic - Horizontal

          Beka-Mak - BMSO 360 CGH NC - - 2020 -

          Technical details
          cutting diameter 360 mm︱saw band length 5200 x 34 x 1,1 mm︱cutting width 610 mm︱ 360 x 360 mm︱Capacity 90° rectangular 610 x 360 mm︱ 360 mm︱ 590 x 360 mm︱ 360 x 360 mm︱ 360 mm︱ 450 x 360 mm︱ 360 x 360 mm︱capacity 60 degrees: round 325 mm︱capacity 60 degrees: flat 280 x 360 mm︱capacity 60 degrees: square 290 x 290 mm︱speeds steplessly adjustable 20 - 100 m/min︱table height 705 mm︱stroke length max. 500 mm︱accuracy +/- 0,3 mm︱feed 6000 mm︱total power requirement 4,22 kW︱
          Horizantal Bandsaws with linear guideways are ideal for mitre cuts with different quantities . With movement of bow it’s possible to cut between 90° and +30°. Cutting capacity at 90° is 360mm x 610mm for flat type and 360 mm for round shaped materials. With auto height adjustment sensors bow approachs the material with fast speed and hydraulic cutting control allows the bow go up over the material after the cut. All this process is controlled by digital counter on control panel and total duration for one cut decreases. Fixing the bow at any angle is controlled by hydraulical brake system and you can control it by another digital counter placed on main body of machine. Standard Features: Saw Blade 34 Saw Blade Brash Lineer Way Hydraulic Vice Hydraulic Feeding Vice Inverter Hydromecanic Blade Tension Hyd. Clamping for Angle PLC Control Panel Pressure Adjustment Optical Height Adjustment Security Switch 3 inclined Blade SAP Coolant Pump Heavy Duty Gearbox Proximity switch for sensing blade slippage Offered Hydraulic Rear Vise Optional Features: ILC Microspray Device Hydraulic Blade Tension 3 Mt Material Roller Table Chip Conveyor Lazer Line Pointer Hydraulic Top Clamping
            cutting diameter 360 mm
            saw band length 5200 x 34 x 1,1 mm
            cutting width 610 mm
            360 x 360 mm
            Capacity 90° rectangular 610 x 360 mm
            360 mm
            590 x 360 mm
            360 x 360 mm
            360 mm
            450 x 360 mm
            360 x 360 mm
            capacity 60 degrees: round 325 mm
            capacity 60 degrees: flat 280 x 360 mm
            capacity 60 degrees: square 290 x 290 mm
            speeds steplessly adjustable 20 - 100 m/min
            table height 705 mm
            stroke length max. 500 mm
            accuracy +/- 0,3 mm
            feed 6000 mm
            total power requirement 4,22 kW
            Description :
            Horizantal Bandsaws with linear guideways are ideal for mitre cuts with
            different quantities . With movement of bow it’s possible to cut between 90°
            and +30°. Cutting capacity at 90° is 360mm x 610mm for flat type and 360 mm
            for round shaped materials. With auto height adjustment sensors bow approachs
            the material with fast speed and hydraulic cutting control allows the bow go up
            over the material after the cut. All this process is controlled by digital
            counter on control panel and total duration for one cut decreases. Fixing the
            bow at any angle is controlled by hydraulical brake system and you can control
            it by another digital counter placed on main body of machine.


            Standard Features:
            Saw Blade 34
            Saw Blade Brash
            Lineer Way
            Hydraulic Vice
            Hydraulic Feeding Vice
            Inverter
            Hydromecanic Blade Tension
            Hyd. Clamping for Angle
            PLC Control Panel
            Pressure Adjustment
            Optical Height Adjustment
            Security Switch
            3 inclined Blade
            SAP Coolant Pump
            Heavy Duty Gearbox
            Proximity switch for sensing blade slippage
            Offered Hydraulic Rear Vise

            Optional Features:
            ILC Microspray Device
            Hydraulic Blade Tension
            3 Mt Material Roller Table
            Chip Conveyor
            Lazer Line Pointer
            Hydraulic Top Clamping




          Datasheet
          Request / Contact
          Scie à bande Scies - Automatique - Horizontale BIANCO 330AE60 ° occasion


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-499 · Band Saw - Automatic - Horizontal

          BIANCO - 330AE60° - - 2018 -

          Technical details
          3.010 x 27 x 0,9 mm︱ 835 mm︱ 3.220 x 1950 x 1900 mm︱ 2.400 x 1.700 x 1.700 mm︱ 1.090 kg︱
          hydraulic, fully automatic bandsaw automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 600 mm/stroke, adjustment by handwheel, counter and limitswitch variable cutting pressure. Machine with 2 cutting speeds cutting fluid system automatic saw blade breakage detection quick clamping vice length stop 0-500 mm and material chute user manual in GERMAN Alternative: Modell 330 AE 60° CNC EURO  14.350,-- as above model, but material feed and number of pieces by CNC cutting capacity 90°: round 260 mm, square 240 mm, rectangular 330 x 120 mm cutting capacity 45°: round 200 mm, square 190 mm, rectangular 200 x 130 mm cutting capacity 60°: round 120 mm, square 115 mm, rectangular 120 x 100 mm cutting speed: 35/70 m/min motor: 0,9/1,5 kW band dimension: 3.010 x 27 x 0,9 mm working height: 835 mm measurements: length: 3.220 x 1950 x 1900 mm transport measurements: width: 2.400 x 1.700 x 1.700 mm weight: 1.090 kg
            3.010 x 27 x 0,9 mm
            835 mm
            3.220 x 1950 x 1900 mm
            2.400 x 1.700 x 1.700 mm
            1.090 kg
            Description :
            hydraulic, fully automatic bandsaw

            automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp
            automatic feed 600 mm/stroke,
            adjustment by handwheel, counter and limitswitch
            variable cutting pressure.
            Machine with 2 cutting speeds
            cutting fluid system
            automatic saw blade breakage detection
            quick clamping vice
            length stop 0-500 mm and material chute
            user manual in GERMAN


            Alternative:

            Modell 330 AE 60° CNC EURO  14.350,--
            as above model, but material feed and
            number of pieces by CNC

            cutting capacity 90°: round 260 mm, square 240 mm, rectangular 330 x 120 mm
            cutting capacity 45°: round 200 mm, square 190 mm, rectangular 200 x 130 mm
            cutting capacity 60°: round 120 mm, square 115 mm, rectangular 120 x 100 mm
            cutting speed: 35/70 m/min
            motor: 0,9/1,5 kW
            band dimension: 3.010 x 27 x 0,9 mm
            working height: 835 mm
            measurements: length: 3.220 x 1950 x 1900 mm
            transport measurements: width: 2.400 x 1.700 x 1.700 mm
            weight: 1.090 kg
          Datasheet
          Request / Contact
          Scie à bande Saws - Automatique - Horizontale occasion Behringer HBP 263 A KGT


          • Krause Maschinenhandels und Service GmbH
          • Hermann Funk Str. 10
          • 28309 Bremen
          • Deutschland

          • 0421-48997070
            0421-489970714
          • verkauf@machine-trade.de
            www.machine-trade.de
          #2022-10015 · Band Saw - Automatic - Horizontal

          Behringer - HBP 263 A KGT - - 2017 -

          Technical details
          cutting diameter 260 mm︱saw band length mm︱cutting width 300 mm︱
            cutting diameter 260 mm
            cutting width 300 mm
          Datasheet
          Request / Contact
          Scie à bande Saws - Automatique - Horizontale d'occasion Behringer SLB 240 A


          • Krause Maschinenhandels und Service GmbH
          • Hermann Funk Str. 10
          • 28309 Bremen
          • Deutschland

          • 0421-48997070
            0421-489970714
          • verkauf@machine-trade.de
            www.machine-trade.de
          #2022-10016 · Band Saw - Automatic - Horizontal

          Behringer - SLB 240 A - - 2017 -

          Technical details
          cutting diameter 240 mm︱saw band length mm︱cutting width 270 mm︱
            cutting diameter 240 mm
            cutting width 270 mm
          Datasheet
          Request / Contact
          Scie à ruban scie à ruban - automatique - horizontale KLAEGER Pharos 220


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05710 · Band Saw - Automatic - Horizontal

          KLAEGER - Pharos 220 - - 2017 -

          Technical details
          cutting diameter 220 mm︱table height 730 mm︱cutting width 220 x 220 mm︱dimensions of saw-band 2890 x 27 x 0,9 mm︱cutting speed 15 - 100 m/min︱feed length 600 mm︱sawing motor 2,0 kW︱weight of the machine ca. 1,0 t︱dimensions of the machine ca. 1960 x 1550 x 1550 mm︱
          Automatic Horizontal Band Saw Condition: As new, approx. 6 working hours
            cutting diameter 220 mm
            table height 730 mm
            cutting width 220 x 220 mm
            dimensions of saw-band 2890 x 27 x 0,9 mm
            cutting speed 15 - 100 m/min
            feed length 600 mm
            sawing motor 2,0 kW
            weight of the machine ca. 1,0 t
            dimensions of the machine ca. 1960 x 1550 x 1550 mm
            Description :
            Automatic Horizontal Band Saw

            Condition: As new, approx. 6 working hours

          Datasheet
          Request / Contact
          Scie à bande - automatique - horizontale KASTO TEC AC 5 KPC d'occasion


          • Krause Maschinenhandels und Service GmbH
          • Hermann Funk Str. 10
          • 28309 Bremen
          • Deutschland

          • 0421-48997070
            0421-489970714
          • verkauf@machine-trade.de
            www.machine-trade.de
          #2022-10019 · Band Saw - Automatic - Horizontal

          KASTO - TEC AC 5 KPC - - 2016 -

          Technical details
          cutting diameter 530 mm︱saw band length mm︱cutting width mm︱
            cutting diameter 530 mm
          Datasheet
          Request / Contact
          Scie à bande - automatique - horizontale HUVEMA BMS0 460 C d'occasion


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-010077 · Band Saw - Automatic - Horizontal

          HUVEMA - BMS0 460 C - - 2015 -

          Technical details
          cutting diameter 460 mm︱saw band length 5200 x 41 x 1,3 mm︱cutting width 460 mm︱cutting capacity - flat 470 x 460 / 90° mm︱cutting capacity - round 460 / 90° mm︱speed 20 - 100 m/min︱voltage 400 V / 50 Hz︱sawing motor 4 kW︱total power requirement 4,7 kW︱weight of the machine ca. 1,665 t︱dimensions of the machine ca. 2100 x 1300 x 850 m︱
          full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m.
            cutting diameter 460 mm
            saw band length 5200 x 41 x 1,3 mm
            cutting width 460 mm
            cutting capacity - flat 470 x 460 / 90° mm
            cutting capacity - round 460 / 90° mm
            speed 20 - 100 m/min
            voltage 400 V / 50 Hz
            sawing motor 4 kW
            total power requirement 4,7 kW
            weight of the machine ca. 1,665 t
            dimensions of the machine ca. 2100 x 1300 x 850 m
            Description :
            full-automatical band saw,
            Accessories:
            • Inverter for controllable speed,
            • automatical stop function after sawing and on breakage of the saw blade,
            • automatical saw arm lifting,
            • hydro-mechanical clamping of the saw blade,
            • material clamping to be effected from above, hydraulical vice,
            • switch for cutting pressure control,
            • coolant pump,
            • roller conveyor, length: 1.2 m.

          Datasheet
          Request / Contact