Band Saw - Automatic

cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: flat 170 x 170 mm︱height of material-table 600 mm︱Pitch min/max 50.000 mm︱vice 335 mm Öffnung︱band speed 15 - 100 m/min︱automatic feeds 600 mm︱dimensions of saw-band 3.650 x 27 x 0,9 mm︱total power requirement 2,2 kW︱weight 1.105 kg︱range L-W-H 3,3 x 2,83 x 2,23 m︱

---

dimensions of saw-band 3650x27x0,9 mm︱speed 15-100 m/min︱vice 335 mm︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330x260 mm︱capacity 45 degrees: round 260/200 mm︱capacity 45 degrees: square 250/180 mm︱capacity 45 degrees: flat 270x200/200x160 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170x170 mm︱total power requirement 2,2 kW︱weight 1.105 kg︱dimensions 2700x2300x1800 mm︱

---

Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.

dimensions of saw-band 3650x27x0,9 mm︱speed 15/100 m/min︱capacity 90 degrees: round 280 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330x260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 mm︱capacity 45 degrees: flat 270x200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170x170 mm︱total power requirement 2,2 kW︱weight 1240 kg︱vice 340 mm︱dimensions 2020x2040x1740 mm︱

---

Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Späneräumbürste and emulsion coolant pump as standard.

15-150 m/min︱dimensions of saw-band 4400x34x1,1 mm︱ 305 mm︱ 305x335 mm︱capacity 90 degrees: round 335 mm︱capacity 90 degrees: flat 500x335 mm︱ 330 mm︱ 320x335 mm︱ 180 mm︱ 170x335 mm︱ 300 mm︱ 80 mm︱ 550 mm︱ 260 mm︱max. material throughput bunch voltage Ø 320 / 320x320 mm︱min. dia. 5 mm︱work height max. 750 mm︱total power requirement 3 kW AC︱Weight 2020 kg︱dimensions 5350x2300x2000 mm︱

---

Standard equipment: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m / min - Hydraulic material full lift voltage - Automatic procedure of the vices - Minimum speed and saw blade monitoring - Electric miter turning via servo motor - Visualized program input with CNC control - Material insertion via servo-controlled ball screw drive

TECHNICAL SPECIFICATION ︱- max. cutting height 330 mm︱- sawband length 5090 mm︱- sawband width 34 mm︱- clamping diameter max. 350 mm︱- max. bar feed (single stroke) 500 mm︱- cutting speed min. 12 m/min︱- cutting speed max. 150 m/min︱ELECTRICAL SPECIFICATIONS ︱- main drive power 4 kW︱- total power consumption 6 kW︱- mains voltage 400 V︱- mains frequency 50 Hz︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2380 mm︱- space requirements -front/back- 1360 mm︱- total weight approx. 2200 kg︱

---

Cutting range round 300 mm Cutting range rectangular 330 x 350 mm Multiple feed up to 10 m cut-off length Frequency controlled drives for cutting and material feed Accessories: + Chip conveyor (screw conveyor), ejection height 450 mm + roller conveyor Machine was intended for relocation to another of the owners plants, but is now being but is now being sold. Therefore the machine is already packed seaworthy. An inspection report from the manufacturer and the Chinese import authorities (CCIC) is available.

cutting diameter 560 mm︱saw band length mm︱cutting width mm︱

---

TECHNICAL SPECIFICATION ︱- max. cutting height 330 mm︱- sawband length 5090 mm︱- clamping diameter max. 350 mm︱- max. bar feed (single stroke) 500 mm︱- cutting speed min. 12 m/min︱- cutting speed max. 150 m/min︱ELECTRICAL SPECIFICATIONS ︱- main drive power 4 kW︱- total power consumption 8 kW︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2360 mm︱- space requirements -front/back- 2330 mm︱- total height 1850 mm︱- total weight approx. 2050 kg︱

---

Cutting range round 300 mm Cutting range rectangular 330 x 350 mm accessories: + chip conveyor (screw conveyor) Hours: Control on 52200 h Saw on 30560 h

cutting diameter 420 mm︱saw band length 41 x 5600 mm︱cutting width 1,3 mm︱Control Simatic S7 Touch ︱band speed 17 - 110 m/min︱sawing motor 7,5 kW︱diameter of round bars 420 x 3000 mm︱diameter of round bars 300 x 6000 mm︱total power requirement 30 kW︱weight of the machine ca. 18,5 t︱dimensions of the machine ca. 12,5 x 5,0 x 2,5 m︱

---

CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.

cutting diameter 260 mm︱saw band length mm︱cutting width mm︱

---

cutting diameter 430 mm︱saw band length 6830 mm︱cutting width 430x430 mm︱Control ︱chip conveyor ︱total power requirement kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 1,6x3,3x2,45 m︱

---

cutting diameter 620 mm︱saw band length 7200 mm︱cutting width 760 mm︱weight of the machine ca. 5 t︱dimensions of the machine ca. 4x2x2.4 m︱

---

Hydraulic more details on www.marcels-maschinen.ch

cutting diameter 420 mm︱saw band length 41 x 1,3 x 4570 mm︱cutting width . mm︱band speed 15-90 m/min︱chip conveyor ︱Table load 2500 kg︱total power requirement 6 kW︱weight of the machine ca. 2,2 t︱

---

echnical data HA-400W cutting capacity Ø 420 mm 415 x 415 mm in bundle cut W 180-300 mm x H 50-200mm motor power: saw band operation 5.5 kW hydraulic 1.5 kW coolant pump 0.18 kW saw band dimensions 41 x 1.3 x 4570 mm band speed 15 - 90 m

cutting diameter 420 mm︱saw band length 41 x 1,3 x 4570 mm︱cutting width . mm︱band speed 15-90 m/min︱chip conveyor ︱Table load 2500 kg︱total power requirement 6 kW︱weight of the machine ca. 2,2 t︱

---

echnical data HA-400W cutting capacity Ø 420 mm 415 x 415 mm in bundle cut W 180-300 mm x H 50-200mm motor power: saw band operation 5.5 kW hydraulic 1.5 kW coolant pump 0.18 kW saw band dimensions 41 x 1.3 x 4570 mm band speed 15 - 90 m

capacity 90 degrees: round 370 mm︱capacity 90 degrees: square 400x370 mm︱dimensions of saw-band 5920x41x1,3 mm︱cutting lenght 10-760 mm︱power capacity 9,2 kW︱cutting diameter 370 mm︱weight of the machine ca. 4200 kg︱

---

capacity 90 degrees: round Ø 335 mm︱capacity 90 degrees: flat 500x335 mm︱ Ø 330 mm︱ 320x335 mm︱ Ø 200 mm︱ 200x335 mm︱ 4400x34x1,1 mm︱cutting speed 15-150 m/min︱ 70 mm︱ 110 mm︱clamping range bunching voltage ︱width 0-500 mm︱height 15-335 mm︱work height max. 750 mm︱total power requirement 4,5 kW︱machine weight ab. 1.550 kg︱range L-W-H 2350x2250x1900 mm︱

---

cutting diameter 320 mm︱capacity 90 degrees: flat 500 mm︱capacity 45 degrees: round 320 mm︱capacity 45 degrees: flat 310x310 mm︱capacity 60 degrees: flat 200x180 mm︱capacity 60 degrees: round 200 mm︱cutting width 500 mm︱single stroke device 0-600 mm︱dimensions of saw-band 4200x32x1,1 mm︱weight of the machine ca. 1800 kg︱

---

TECHNICAL SPECIFICATION ︱- max. cutting height 360 mm︱- sawband length 4870 mm︱- sawband width 41 mm︱- diameter of disc 550 mm︱- chucking capacity min 10 mm︱- clamping diameter max. 360 mm︱- max. bar feed (single stroke) 400 mm︱- cutting speed min. 11 m/min︱- cutting speed max. 110 m/min︱- number of speeds 2 ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 3170 mm︱- space requirements -front/back- 2225 mm︱- total height 2220 mm︱- total weight approx. 2100 kg︱

---

Machine comes with two boxes of 30 new saw bands

cutting diameter 263 mm︱saw band length 4640 mm︱cutting width 1,1 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

hydr. material clamping stepless clamping pressure adjustment hydraulic band clamping chip conveyor coolant device Technische Daten / technical details: Schnittbereich rund / cutting range round 260 mm Schnittbereich flach / cutting range flat 300x260 mm Sägebandabmessung / size of saw blade 4640 x 34 x 1,1 mm Schnittgeschwindigkeit / cutting speed 14-125 m/min. Antriebsleistung / drive capacity 8 kW Gewicht der Maschine / weight 2000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

cutting diameter 10 - 250 mm︱saw band length 4.100 mm︱Belt thickness 1,1 mm︱band width 34 mm︱

---

The machine is in good condition and can be inspected under power. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SBA 241/SM | SBA 241 SM

cutting diameter 420 mm︱saw band length 6300 mm︱cutting speed 20-130 m/min︱cutting width at rectangle material 420x420 mm︱cutting pressure einstellbar ︱chip conveyor ︱weight of the machine ca. 3 t︱feeds slides 7mm Rollenbahn ︱Control ︱total power requirement 8 kW︱

---

cutting diameter 350 mm︱saw band length . mm︱cutting width 450 mm︱angle feeding table ︱Roller conveyor length 3800 mm︱Roller conveyor width 450 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

cutting diameter 406 mm︱saw band length 4570 mm︱cutting width 1,06 mm︱band speed 15-90 m/min︱chip conveyor ︱Table load 2500 kg︱total power requirement 5,5 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. m︱

---

echnical data HA-400W cutting capacity Ø 420 mm 415 x 415 mm in bundle cut W 180-300 mm x H 50-200mm motor power: saw band operation 5.5 kW hydraulic 1.5 kW coolant pump 0.18 kW saw band dimensions 41 x 1.3 x 4570 mm band speed 15 - 90 m

cutting diameter 420 mm︱saw band length 6300 mm︱cutting width 420 mm︱cutting speed 20-130 m/min︱cutting pressure einstellbar ︱single stroke device 600 ︱chip conveyor kW︱weight of the machine ca. 5.5 t︱total power requirement 8 kW︱

---

automatic feeder ja ︱material length 460 mm︱material width 320 mm︱weight of the machine ca. 2 t︱documentation ja ︱

---