Réseau européen de revendeurs de machines de stockage

Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          milling machining centers - universal

          Machinelist: centres d'usinage de fraisage - universels


          milling machining centers - universal

          used Milling machines milling machining centers - universal WEMAS VZG 65-5A Generation II


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08651 · milling machining centers - universal

          WEMAS - VZG 65-5A Generation II - - Fabrikneu - Heidenhain TNC 640 HSCI

          Technical details
          x-travel 620 mm︱y-travel 520 mm︱z-travel 460 mm︱Control Heidenhain TNC 640 HSCI ︱surface area 650 mm︱table rotation 360 °︱tablemovement on both sides -50 / + 110 °︱table load 300 kg︱T-slots 5 x 18 H7 x 100 ︱distance spindle nose and table 180 - 640 mm︱c-axis 360 °︱B-axis (table) -50 / + 110 °︱turning speeds 20-12.000 (15.+18+24.000) U/min︱spindle motor 33 / 180 (17/108) kW / Nm︱rapid traverse x / y + z - axis 48 m/min︱b-axis 25 UpM︱c-axis 25 UpM︱numbers of tools in magazin 48 (60/120) ︱spindle taper SK 40 / BT 40 / HSK 63A ︱total connect load 35 kW︱
          New 5-axis machining center WEMAS VZG 65 - 5A Generation II for simultaneous milling and full 5-side machining, Heidenhain glass scales in x, y, z, directly Encoder Heidenhain in B, C. Main spindle AC - direct drive motor, digital axle drives, extensive standard equipment such as conveyor belt chip conveyor,elec. handwheel, control cabinet cooling, spindle cooling, z-axis temperature compensation, full protection cabin (without cab roof),coolant unit with cabin flushing / external coolant / IKZ 30 bar / hand rinse with additional gun, four guideways in the Y axis, data interfaces. As an alternative to the Heidenhain control, Siemens 840 D SL can also be offered. Many optional accessories available as different speed ratings of the main spindle, tool changer in various number of toolpositions, various internal cooling systems with multiple pressure outputs and filters, laser measuring system, blown air, oil mist suction, hydraulic clamp, instruction and training and much more.
            x-travel 620 mm
            y-travel 520 mm
            z-travel 460 mm
            Control Heidenhain TNC 640 HSCI
            surface area 650 mm
            table rotation 360 °
            tablemovement on both sides -50 / + 110 °
            table load 300 kg
            T-slots 5 x 18 H7 x 100
            distance spindle nose and table 180 - 640 mm
            c-axis 360 °
            B-axis (table) -50 / + 110 °
            turning speeds 20-12.000 (15.+18+24.000) U/min
            spindle motor 33 / 180 (17/108) kW / Nm
            rapid traverse x / y + z - axis 48 m/min
            b-axis 25 UpM
            c-axis 25 UpM
            numbers of tools in magazin 48 (60/120)
            spindle taper SK 40 / BT 40 / HSK 63A
            total connect load 35 kW
            Description :
            New 5-axis machining center WEMAS VZG 65 - 5A Generation II for simultaneous
            milling and full 5-side machining, Heidenhain glass scales in x, y, z, directly
            Encoder Heidenhain in B, C. Main spindle AC - direct drive motor, digital axle
            drives, extensive standard equipment such as conveyor belt chip conveyor,elec.
            handwheel, control cabinet cooling, spindle cooling, z-axis temperature
            compensation, full protection cabin (without cab roof),coolant unit with cabin
            flushing / external coolant / IKZ 30 bar / hand rinse with additional gun, four
            guideways in the Y axis, data interfaces.
            As an alternative to the Heidenhain control, Siemens 840 D SL can also be
            offered.
            Many optional accessories available as different speed ratings of the main
            spindle, tool changer in various number of toolpositions, various internal
            cooling systems with multiple pressure outputs and filters, laser measuring
            system, blown air, oil mist suction, hydraulic clamp, instruction and training
            and much more.
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal OPTIMUM OPTImill FU 5 - 600 HSC 15


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8707 · milling machining centers - universal

          OPTIMUM - OPTImill FU 5 - 600 HSC 15 - - 2020 - Sinumerik 840D sl Siemens

          Technical details
          x-travel 600 mm︱y-travel 600 mm︱z-travel 500 mm︱control Sinumerik 840D sl Siemens︱Main spindle: ︱turning speed range - main spindle max. 15.000 min/-1︱power capacity - main spindel 40 / 25 kW︱max. Torque 261 / 105 Nm︱tool taper SK 40 DIN 69871︱NC-Tilting round table: ︱table diameter 600 mm︱max. table load 600 kg︱T-slots 7x 14 x 75 mm︱swivellable A: +/- 120 °︱rotatable C: 360 °︱Tool-Presetter: ︱number of toolpositions 32 pos.︱tool taper SK 40 ︱max. tool diameter 78 / (120) mm︱max. tool length 300 mm︱
          CNC-MachiningCenter Universal OPTIMUM - OPTImill FU 5 - 600 HSC 15 - NEW MACHINE / SHOW-ROOM-MACHINE - 5 Axis-Simultaneous-Machining - NC-Swivel-Rotary-Table - alternative configuration available, optional and on request !
            x-travel 600 mm
            y-travel 600 mm
            z-travel 500 mm
            control Sinumerik 840D sl Siemens
            turning speed range - main spind. max. 15.000 min/-1
            power capacity - main spindel 40 / 25 kW
            max. Torque 261 / 105 Nm
            tool taper SK 40 DIN 69871
            table diameter 600 mm
            max. table load 600 kg
            T-slots 7x 14 x 75 mm
            swivellable A: +/- 120 °
            rotatable C: 360 °
            number of toolpositions 32 pos.
            tool taper SK 40
            max. tool diameter 78 / (120) mm
            max. tool length 300 mm
            Description :
            CNC-MachiningCenter Universal
            OPTIMUM - OPTImill FU 5 - 600 HSC 15

            - NEW MACHINE / SHOW-ROOM-MACHINE
            - 5 Axis-Simultaneous-Machining
            - NC-Swivel-Rotary-Table

            - alternative configuration available, optional and on request !
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal OPTIMUM OPTImill F 120 X


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8711 · milling machining centers - universal

          OPTIMUM - OPTImill F 120 X - - 2020 - Sinumerik 828D Siemens

          Technical details
          x-travel 500 mm︱y-travel 400 mm︱z-travel 300 mm︱control Sinumerik 828D Siemens︱Main spindle: ︱turning speed range - main spindle max. 16.000 min/-1︱power capacity - main spindel 22,8 / 12 kW︱max. Torque 116 Nm︱tool taper BT 30 DIN 69871︱work table: ︱table surface area 650 x 400 mm︱max. table load 250 kg︱T-slots 3x 14 x 125 mm︱distance spindle /table 150 - 450 mm︱Tool-Presetter: ︱number of toolpositions 21 pos.︱tool taper BT 30 ︱max. tool diameter 80 mm︱max. tool length 80 mm︱max. tool weight 3,0 kg︱
          CNC-MachiningCenter Universal OPTIMUM - OPTImill F 120 X - NEW MACHINE / SHOW-ROOM-MACHINE - alternative configuration available, optional and on request !
            x-travel 500 mm
            y-travel 400 mm
            z-travel 300 mm
            control Sinumerik 828D Siemens
            turning speed range - main spind. max. 16.000 min/-1
            power capacity - main spindel 22,8 / 12 kW
            max. Torque 116 Nm
            tool taper BT 30 DIN 69871
            table surface area 650 x 400 mm
            max. table load 250 kg
            T-slots 3x 14 x 125 mm
            distance spindle /table 150 - 450 mm
            number of toolpositions 21 pos.
            tool taper BT 30
            max. tool diameter 80 mm
            max. tool length 80 mm
            max. tool weight 3,0 kg
            Description :
            CNC-MachiningCenter Universal
            OPTIMUM - OPTImill F 120 X

            - NEW MACHINE / SHOW-ROOM-MACHINE

            - alternative configuration available, optional and on request !
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal TREVISAN DS 600/200 C


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17493 · milling machining centers - universal

          TREVISAN - DS 600/200 C - - 2016 - Fanuc 31i-B

          Technical details
          x-travel 1340 mm︱y-travel 1200 mm︱z-travel 1100 mm︱clearance diameter 1600 mm︱table surface area 900 x 900 mm︱workpiece weight 2600 kg︱spindle turning speed - stepless 2800 U/min︱spindle motor 37/45 kW︱tool length - max. 650 mm︱weight of tools max. 35 kg︱control Fanuc 31i-B ︱U-axis 200 mm︱turning diameter 900 mm︱faceplate turning speed range 450 U/min︱total power requirement - kW︱weight of the machine ca. 33 t︱dimensions of the machine ca. 7,6 x 7,1 x 4,2 m︱
          A machining center and a lathe, together. A heavy-duty machine, consisting of the highest quality materials, as istradition for Trevisan: all the mechanical motion of the contour head, diameter 600 are made of hardened steel; stand frame is welded steel; the head is Meehanite. The machining center is equipped with 900 x 900 pallets. The rotation is by a double worm screw with a special backlash removal. A high precision angle encoder provide the accuracy to 0,001° rotation. With the table positioned, 4 hydraulic cylinder ensure a solid clamping of the pallet to allow heavy machining. - CNC Control FANUC 31i-B - 2 Pallets (each 900x900mm) - ATC for 54 tools - Coolant - Chip Conveyor
            x-travel 1340 mm
            y-travel 1200 mm
            z-travel 1100 mm
            clearance diameter 1600 mm
            table surface area 900 x 900 mm
            workpiece weight 2600 kg
            spindle turning speed - stepless 2800 U/min
            spindle motor 37/45 kW
            tool length - max. 650 mm
            weight of tools max. 35 kg
            control Fanuc 31i-B
            U-axis 200 mm
            turning diameter 900 mm
            faceplate turning speed range 450 U/min
            total power requirement - kW
            weight of the machine ca. 33 t
            dimensions of the machine ca. 7,6 x 7,1 x 4,2 m
            Description :
            A machining center and a lathe, together.
            A heavy-duty machine, consisting of the highest quality materials, as
            istradition for Trevisan: all the mechanical motion of the contour head,
            diameter 600 are made of hardened steel; stand frame is welded steel; the head
            is Meehanite. The machining center is equipped with 900 x 900 pallets. The
            rotation is by a double worm screw with a special backlash removal. A high
            precision angle encoder provide the accuracy to 0,001° rotation. With the table
            positioned, 4 hydraulic cylinder ensure a solid clamping of the pallet to allow
            heavy machining.

            - CNC Control FANUC 31i-B
            - 2 Pallets (each 900x900mm)
            - ATC for 54 tools
            - Coolant
            - Chip Conveyor
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal HAAS VM 6


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-895 · milling machining centers - universal

          HAAS - VM 6 - - 2012 -

          Technical details
          x-travel 1.626 mm︱y-travel 813 mm︱z-travel 762 mm︱table weight 1.800 Kg︱number of tools 24 ︱table-size 1.625 x 711 mm︱output 22 kw︱spindle 12.000 U/min︱
            x-travel 1.626 mm
            y-travel 813 mm
            z-travel 762 mm
            table weight 1.800 Kg
            number of tools 24
            table-size 1.625 x 711 mm
            output 22 kw
            spindle 12.000 U/min
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DMG MORI HSC 55 linear HSC 55 linear


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-892 · milling machining centers - universal

          DMG MORI HSC 55 linear - HSC 55 linear - - 2011 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 450 mm︱y-travel 650 mm︱z-travel 460 mm︱Control HEIDENHAIN iTNC 530 ︱Tools changer 60 fach/tools︱table-size 460 x 600 mm︱turning speeds 20.000 U/min︱output 29 kw︱taper HSK A 63 ︱a-axis 10º/-110º +- °︱c-axis 360 °︱Internal cooling system 10 - 80 bar︱
            x-travel 450 mm
            y-travel 650 mm
            z-travel 460 mm
            Control HEIDENHAIN iTNC 530
            Tools changer 60 fach/tools
            table-size 460 x 600 mm
            turning speeds 20.000 U/min
            output 29 kw
            taper HSK A 63
            a-axis 10º/-110º +- °
            c-axis 360 °
            Internal cooling system 10 - 80 bar
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DMG DMU 60 monoBlock


          • STEINHAND GmbH
          • Wiehagen 10
          • 45472 Mülheim a.d. Ruhr
          • Deutschland

          • +49 (0) 208 / 444 865 01
            +49 (0) 208 / 444 865 29
          • info@steinhand.de
            www.steinhand.de
          #2026-1127 · milling machining centers - universal

          DMG - DMU 60 monoBlock - - 2011 - HEIDENHAIN - iTNC 530

          Technical details
          travel -x axis 630 mm︱travel -y axis 560 mm︱travel -z axis 560 mm︱Control HEIDENHAIN - iTNC 530 ︱spindle taper SK 40 ︱spindle turning speed range 18.000 U/min︱surface area 600 x 1.000 mm︱rotary table dia. 600 mm︱
          5-axis simultaneous machining center - NC swivel head B axis - NC rotary table C axis Tool magazine 24-fold 3D - probe system for workpiece measurement (Heidenhain TS 649). Only 8,850 spindle hours. Machine is supplied with extensive ample tool holders. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU60monoBlock | DMU60 monoBlock | 60monoBlock | mono Block
            travel -x axis 630 mm
            travel -y axis 560 mm
            travel -z axis 560 mm
            Control HEIDENHAIN - iTNC 530
            spindle taper SK 40
            spindle turning speed range 18.000 U/min
            surface area 600 x 1.000 mm
            rotary table dia. 600 mm
            Description :
            5-axis simultaneous machining center

            - NC swivel head B axis
            - NC rotary table C axis

            Tool magazine 24-fold
            3D - probe system for workpiece measurement (Heidenhain TS 649).
            Only 8,850 spindle hours.
            Machine is supplied with extensive ample tool holders.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DMU60monoBlock | DMU60 monoBlock | 60monoBlock | mono Block
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DMG DMU 60 monoBlock


          • Maturus Tradeinvest GmbH
          • Brodschrangen 3-5
          • 20457 Hamburg
          • Deutschland

          • +49 (0)40 3003936255
            +49 (0)40 3003936249
          • info@maturus.com
            www.maturus.com
          #2055-S3 · milling machining centers - universal

          DMG - DMU 60 monoBlock - - 2011 - ITNC 530 Haidenhain

          Technical details
          x-travel 630 mm︱y-travel 560 mm︱z-travel 560 mm︱Control ITNC 530 Haidenhain ︱tool taper SK 40 ︱number of spindle speeds 18000 U/min ︱surface area 600 x 1000 mm︱rotary table dia. 600 mm︱tool magazin: 60 ︱total power requirement 15 kW︱
          - NC swivel head B axis - NC rotary table C axis - Tool magazine 24-fold - Only 8,850 spindle hours - incl. extensive tool holders
            x-travel 630 mm
            y-travel 560 mm
            z-travel 560 mm
            Control ITNC 530 Haidenhain
            tool taper SK 40
            number of spindle speeds 18000 U/min
            surface area 600 x 1000 mm
            rotary table dia. 600 mm
            tool magazin: 60
            total power requirement 15 kW
            Description :
            - NC swivel head B axis
            - NC rotary table C axis
            - Tool magazine 24-fold
            - Only 8,850 spindle hours
            - incl. extensive tool holders
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DMG DMF 260


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4690 · milling machining centers - universal

          DMG - DMF 260 - - 2009 -

          Technical details
          x-travel 2600 mm︱y-travel 700 mm︱z-travel 700 mm︱table-size 2900x700 mm︱tool change unit 120x ︱spindle taper HSK63 ︱milling head -swivable +/- 100 °︱spindle turning speed range -18000 U/min︱rotary table dia. 750 mm︱weight of the machine ca. 20 t︱
          SIEMENS 840D SL ShopMill Integrated rotary table ( C axis ) Milling head swivelling ( B axis ) Pendulum operation 3D Quickset Coolant through spindle Mehr Infos auf www.marcels-maschinen.ch
            x-travel 2600 mm
            y-travel 700 mm
            z-travel 700 mm
            table-size 2900x700 mm
            tool change unit 120x
            spindle taper HSK63
            milling head -swivable +/- 100 °
            spindle turning speed range -18000 U/min
            rotary table dia. 750 mm
            weight of the machine ca. 20 t
            Description :
            SIEMENS 840D SL ShopMill

            Integrated rotary table ( C axis )
            Milling head swivelling ( B axis )
            Pendulum operation
            3D Quickset
            Coolant through spindle

            Mehr Infos auf www.marcels-maschinen.ch

          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DMG DMU 50 evo Linear


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03505 · milling machining centers - universal

          DMG - DMU 50 evo Linear - - 2008 - Heidenhain

          Technical details
          x-travel 500 mm︱y-travel 450 mm︱z-travel 400 mm︱b-axis °︱c-axis °︱control Heidenhain ︱type ITNC 530︱spindle taper ISO 40 ︱turning speeds 18000 U/min︱Tool changer 60 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 500 mm
            y-travel 450 mm
            z-travel 400 mm
            control Heidenhain
            type ITNC 530
            spindle taper ISO 40
            turning speeds 18000 U/min
            Tool changer 60
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DUGARD Eagle 850


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05234 · milling machining centers - universal

          DUGARD - Eagle 850 - - 2008 - Fanuc

          Technical details
          Control Fanuc ︱x-travel 850 mm︱y-travel 520 mm︱z-travel 510 mm︱changer 24 Plätze︱tool adaptor SK40max. 10.000 U/Min︱chip conveyor ︱weight of the machine ca. 12 t︱
            Control Fanuc
            x-travel 850 mm
            y-travel 520 mm
            z-travel 510 mm
            changer 24 Plätze
            tool adaptor SK40
            max. 10.000 U/Min
            weight of the machine ca. 12 t
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DECKEL-MAHO DMC 75V Linear


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5317 · milling machining centers - universal

          DECKEL-MAHO - DMC 75V Linear - - 2007 - Heidenhain 530

          Technical details
          x-travel 885 mm︱y-travel 600 mm︱z-travel 600 mm︱b-axis -10 +110 °︱c-axis 750mm 360 0︱control Heidenhain 530 ︱number of spindles 18.000 ︱spindle taper HSK63 ︱weight of the machine ca. 12 t︱
            x-travel 885 mm
            y-travel 600 mm
            z-travel 600 mm
            b-axis -10 +110 °
            c-axis 750mm 360 0
            control Heidenhain 530
            number of spindles 18.000
            spindle taper HSK63
            weight of the machine ca. 12 t
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DECKEL-MAHO DMC 635V


          • Brandner Revalue GmbH
          • Mozartstr. 24
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 928 58 75
            +49 (0) 7309 928 58 74
          • mb@b-rv.de
            www.b-rv.de
          #2011-2002006 · milling machining centers - universal

          DECKEL-MAHO - DMC 635V - - 2007 - Heidenhain iTNC530

          Technical details
          x-travel 635 mm︱y-travel 510 mm︱z-travel 460 mm︱Control Heidenhain iTNC530 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 635 mm
            y-travel 510 mm
            z-travel 460 mm
            Control Heidenhain iTNC530
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal MCM Clock 700 5-Achsen MP10


          • AS Maschinenhandel
          • Welserstr. 10e
          • 51149 Köln
          • Deutschland

          • +49 (0)22031864856
            +49 (0)22031864857
          • mail@asmaschinenhandel.de
            www.asmaschinenhandel.de
          #2044-10052 · milling machining centers - universal

          MCM - Clock 700 5-Achsen MP10 - - 2007 - Fanuc 16i-MB

          Technical details
          x-travel 700 mm︱y-travel 715 mm︱z-travel 850 mm︱table-size 500 x 500 mm︱tool taper ISO 40 ︱Control Fanuc 16i-MB ︱total power requirement kW︱weight of the machine ca. 21 t︱dimensions of the machine ca. m︱
            x-travel 700 mm
            y-travel 715 mm
            z-travel 850 mm
            table-size 500 x 500 mm
            tool taper ISO 40
            Control Fanuc 16i-MB
            weight of the machine ca. 21 t
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DECKEL MAHO DMC 80 U duoBLOCK


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0272 · milling machining centers - universal

          DECKEL MAHO - DMC 80 U duoBLOCK - - 2006 - SINUMERIK 840D powerline

          Technical details
          x-travel 800 mm︱y-travel 800 mm︱z-travel 800 mm︱control SINUMERIK 840D powerline ︱total power requirement 88 kVA︱weight of the machine ca. 14,6 t︱dimensions of the machine ca. 12 x 5 x 3,3 m︱
          Milling machining center - universal with 6-fold pallet pool Brand: DECKEL MAHO / Type: DMC 80 U duoBLOCK / Year of construction: 2006 Operating hours (20.10.2020): - Machine "ON": 58.191 h - Program run: 24.198 h - Spindle hours: 18.962 h Condtion: Very good (used), fully functional. Availability: Immediately. The machine can be inspected by appointment in the factory under power. TECHNICAL SPECIFICATIONS: Travels: X/Y/Z: 800 mm x 800 mm x 800 mm - Main drive: Integrated motor spindle - Milling spindle: Spindle speed: 20 - 12.000 rpm - Tool holder: SK 50 / HSK-A100 according to DIN 69872 - NC-Swivel milling head (horizontal/vertical) - Tool magazine (rack-type magazine vertical) with 300 magazine positions, Tool exchange door revolving wall 30, Magazine positions for set of armor - NC-Rotary table - Pallet round storage 6 pallets, d 800 mm x 630 mm with Zero point clamping system Schunk integrated in the pallet. Threaded holes M 16, according to DIN 55201-A2 Grid: 50 mm - Total power requirement : 88 kVA Weights: - Machine weight without tool magazine: approx. 14,6 t - Chip conveyor: approx. 0,6 tons - Band filter system: approx. 0,85 tons - Tool magazine with sluice: approx. 13,6 tons Space requirement Length/Width/Height: 12.000 x 5.000 x 3.300 mm EQUIPMENT: - CNC control: SINUMERIK 840D powerline XP - Coolant tank, capacity of 980 litres - Coolant through the spindle with 2 pressure stages 40/80 bar - Measurement probe Renishaw MP 10 - TDS Tool identification - Tool breakage control - Rinsing pistol - Oil and emulsion mist cutting system - Electronic handwheel - Operating mode 4 "Process monitoring in production" - Manual intervention with open doors - Operation of the clamping hydraulics (clamp/release) with open setup station door via hand switch - Chip conveyor - Rotating inspection glass - Documentation and electrical circuit diagram in German language - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.
            x-travel 800 mm
            y-travel 800 mm
            z-travel 800 mm
            control SINUMERIK 840D powerline
            total power requirement 88 kVA
            weight of the machine ca. 14,6 t
            dimensions of the machine ca. 12 x 5 x 3,3 m
            Description :
            Milling machining center - universal with 6-fold pallet pool
            Brand: DECKEL MAHO / Type: DMC 80 U duoBLOCK / Year of construction: 2006

            Operating hours (20.10.2020):
            - Machine "ON": 58.191 h
            - Program run: 24.198 h
            - Spindle hours: 18.962 h

            Condtion: Very good (used), fully functional.

            Availability: Immediately.

            The machine can be inspected by appointment in the factory under power.

            TECHNICAL SPECIFICATIONS:
            Travels:
            X/Y/Z: 800 mm x 800 mm x 800 mm

            - Main drive: Integrated motor spindle
            - Milling spindle:
            Spindle speed: 20 - 12.000 rpm

            - Tool holder: SK 50 / HSK-A100 according to DIN 69872
            - NC-Swivel milling head (horizontal/vertical)
            - Tool magazine (rack-type magazine vertical) with 300 magazine positions,
            Tool exchange door revolving wall 30,
            Magazine positions for set of armor

            - NC-Rotary table
            - Pallet round storage 6 pallets, d 800 mm x 630 mm with
            Zero point clamping system Schunk integrated in the pallet.
            Threaded holes M 16, according to DIN 55201-A2
            Grid: 50 mm

            - Total power requirement : 88 kVA

            Weights:
            - Machine weight without tool magazine: approx. 14,6 t
            - Chip conveyor: approx. 0,6 tons
            - Band filter system: approx. 0,85 tons
            - Tool magazine with sluice: approx. 13,6 tons

            Space requirement Length/Width/Height: 12.000 x 5.000 x 3.300 mm

            EQUIPMENT:
            - CNC control: SINUMERIK 840D powerline XP
            - Coolant tank, capacity of 980 litres
            - Coolant through the spindle with 2 pressure stages 40/80 bar
            - Measurement probe Renishaw MP 10
            - TDS Tool identification
            - Tool breakage control
            - Rinsing pistol
            - Oil and emulsion mist cutting system
            - Electronic handwheel
            - Operating mode 4 "Process monitoring in production"
            - Manual intervention with open doors
            - Operation of the clamping hydraulics (clamp/release) with open
            setup station door via hand switch
            - Chip conveyor
            - Rotating inspection glass
            - Documentation and electrical circuit diagram in German language
            - CE marking

            There is no guarantee for correctness and completeness of the technical details
            and accessories.
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DECKEL-MAHO DMU 70eVolution


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-053648 · milling machining centers - universal

          DECKEL-MAHO - DMU 70eVolution - - 2006 -

          Technical details
          x-travel 750 mm︱y-travel 600 mm︱z-travel 520 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Heidenhain iTNC 530 CNC control NC- swivel-rotary table (4. and 5. axis) 32-fold tool changer coolant through spindle device (IKZ) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg quer / Y-travel vertical 600 mm Z-Weg senkrecht / Z-travel cross 520 mm C-Achse / C-axis 360 ° B-Achse / B-axis 0- -180 ° Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 18000 UpM /rpm Vorschubbereich / feed range 20000 mm/min Eilgang / rapid feed 50 m/min Anzahl der Werkzeugplätze / no. of tool places ATC 32 NC-Schwenkrundtischabmessungen / NC-swivel-rotary table dimensions 700x500 mm Gewicht der Maschine ca. / weight 10000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            x-travel 750 mm
            y-travel 600 mm
            z-travel 520 mm
            Description :
            Heidenhain iTNC 530 CNC control
            NC- swivel-rotary table (4. and 5. axis)
            32-fold tool changer
            coolant through spindle device (IKZ)
            chip conveyor
            coolant device

            Technische Daten / technical details:
            X-Weg längs / X-travel longitudinal 750 mm
            Y-Weg quer / Y-travel vertical 600 mm
            Z-Weg senkrecht / Z-travel cross 520 mm
            C-Achse / C-axis 360 °
            B-Achse / B-axis 0- -180 °
            Spindelaufnahme / spindle taper SK40
            Drehzahlbereich / spindle speed 18000 UpM /rpm
            Vorschubbereich / feed range 20000 mm/min
            Eilgang / rapid feed 50 m/min
            Anzahl der Werkzeugplätze / no. of tool places ATC 32
            NC-Schwenkrundtischabmessungen / NC-swivel-rotary table dimensions 700x500
            mm
            Gewicht der Maschine ca. / weight 10000 Kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.



          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DECKEL-MAHO DMC 60 U hi-dyn


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-689859 · milling machining centers - universal

          DECKEL-MAHO - DMC 60 U hi-dyn - - 2006 -

          Technical details
          x-travel 600 mm︱y-travel 600 mm︱z-travel 700 mm︱total power requirement 60 kW︱weight of the machine ca. 9.500 kg︱dimensions of the machine ca. m︱
            x-travel 600 mm
            y-travel 600 mm
            z-travel 700 mm
            total power requirement 60 kW
            weight of the machine ca. 9.500 kg
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal MATEC 30 HV


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17836 · milling machining centers - universal

          MATEC - 30 HV - - 2006 - Bosch-Rexroth

          Technical details
          x-travel 5000 mm︱y-travel 600 mm︱z-travel 800 mm︱Control Bosch-Rexroth ︱spindle turning speed range 24000 U/min︱table-size mm︱spindle motor 30 kW︱total power requirement - kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. - m︱
          - CNC control Bosch-Rexroth - Swivel head B axis -/- 105° - ATC 36-fold (SK 40) - IKZ tank system with 20bar internal cooling and 4bar external cooling - Paperband Filter - chip conveyor - switch cabinet - Safety fence rear with door - Extraction system
            x-travel 5000 mm
            y-travel 600 mm
            z-travel 800 mm
            Control Bosch-Rexroth
            spindle turning speed range 24000 U/min
            spindle motor 30 kW
            total power requirement - kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. - m
            Description :

            - CNC control Bosch-Rexroth
            - Swivel head B axis -/- 105°
            - ATC 36-fold (SK 40)
            - IKZ tank system with 20bar internal cooling and 4bar external cooling
            - Paperband Filter
            - chip conveyor
            - switch cabinet
            - Safety fence rear with door
            - Extraction system


          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal MATEC 30 HV/K/NC


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4582 · milling machining centers - universal

          MATEC - 30 HV/K/NC - - 2006 -

          Technical details
          x-travel 1300 mm︱y-travel 600 mm︱z-travel 800 mm︱table-size 1515x635 mm︱round table 630 ︱spindle taper HSK63 ︱spindle turning speed range 15000 U/min︱tool change unit 36x ︱weight of the machine ca. 8.5 t︱
          HEIDENHAIN iTNC530 Swivel axis milling head +/- 105° Integrated NC rotary table D-630mm 3D tracer RENISHAW www.marcels-maschinen.ch
            x-travel 1300 mm
            y-travel 600 mm
            z-travel 800 mm
            table-size 1515x635 mm
            round table 630
            spindle taper HSK63
            spindle turning speed range 15000 U/min
            tool change unit 36x
            weight of the machine ca. 8.5 t
            Description :
            HEIDENHAIN iTNC530

            Swivel axis milling head +/- 105°
            Integrated NC rotary table D-630mm
            3D tracer RENISHAW

            www.marcels-maschinen.ch
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal CHIRON FZ 18 L


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-896 · milling machining centers - universal

          CHIRON - FZ 18 L - - 2005 - Siemens 840 D SL

          Technical details
          x-travel 2.000 mm︱y-travel 400 mm︱z-travel 425 mm︱Control Siemens 840 D SL ︱spindle SK 40 ︱turning speeds 10.000 U/min︱surface area 2.280 x 450 mm︱Tools changer 36 fach/tools︱weight of the machine ca. 7.200 kg︱dimensions of the machine ca. 4.219 x 3.920 x 3.055 m︱
            x-travel 2.000 mm
            y-travel 400 mm
            z-travel 425 mm
            Control Siemens 840 D SL
            spindle SK 40
            turning speeds 10.000 U/min
            surface area 2.280 x 450 mm
            Tools changer 36 fach/tools
            weight of the machine ca. 7.200 kg
            dimensions of the machine ca. 4.219 x 3.920 x 3.055 m
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DECKEL-MAHO (DMG) DMU 80P


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-053638 · milling machining centers - universal

          DECKEL-MAHO (DMG) - DMU 80P - - 2005 -

          Technical details
          x-travel 800 mm︱y-travel 800 mm︱z-travel 600 mm︱
          L.-Nr. 5.3-638 1 gebr. CNC 5-Seiten Bearbeitungszentrum Deckel-Maho DMU 80P, Bj. 2005 1 used CNC 5-side Milling Center Deckel-Maho DMU 80P, built 2005 Heidenhain Mill Plus IT NC Schwenkkopf H/V NC-Rundtisch (C-Achse) Werkzeugmagazin für 30 Werkzeuge innere Kühlmittelzufuhr (IKZ) Späneförderer Heidenhain Mill Plus IT NC swivel head H/V NC-rotary table (C-axis) automatic tool changer for 30 tools coolant through spindle (IKZ) chip conveyor Technische Daten / technical details: X-Weg / X-travel 800 mm Y-Weg / Y-travel 700 mm Z-Weg / Z-travel 600 mm C-Achse / C-axis 360 x 0,001 ° Spindelaufnahme / spindle taper SK40 NC-Rundtisch / NC-rotary table 900 x 630 mm Antriebsleistung Spindel 100%ED,40%ED / drive capacity spindle 100%ED,40%ED 19, 28 kW Gewicht der Maschine ca. / weight 9000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            x-travel 800 mm
            y-travel 800 mm
            z-travel 600 mm
            Description :
            L.-Nr. 5.3-638
            1 gebr. CNC 5-Seiten Bearbeitungszentrum Deckel-Maho DMU 80P, Bj. 2005
            1 used CNC 5-side Milling Center Deckel-Maho DMU 80P, built 2005

            Heidenhain Mill Plus IT
            NC Schwenkkopf H/V
            NC-Rundtisch (C-Achse)
            Werkzeugmagazin für 30 Werkzeuge
            innere Kühlmittelzufuhr (IKZ)
            Späneförderer
            Heidenhain Mill Plus IT
            NC swivel head H/V
            NC-rotary table (C-axis)
            automatic tool changer for 30 tools
            coolant through spindle (IKZ)
            chip conveyor

            Technische Daten / technical details:
            X-Weg / X-travel 800 mm
            Y-Weg / Y-travel 700 mm
            Z-Weg / Z-travel 600 mm
            C-Achse / C-axis 360 x 0,001 °
            Spindelaufnahme / spindle taper SK40
            NC-Rundtisch / NC-rotary table 900 x 630 mm
            Antriebsleistung Spindel 100%ED,40%ED / drive capacity spindle 100%ED,40%ED
            19, 28 kW
            Gewicht der Maschine ca. / weight 9000 Kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -

          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DMG DMC80U duoBLOCK


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4682 · milling machining centers - universal

          DMG - DMC80U duoBLOCK - - 2005 - SIEMENS 840D PL Shopmill

          Technical details
          x-travel 800 mm︱y-travel 800 mm︱z-travel 800 mm︱Control SIEMENS 840D PL Shopmill ︱milling head -swivable +/- 30/180 °︱spindle taper HSK100 ︱spindle turning speed range -8000 U/min︱size of pallet 2x 800x630 mm︱tool change unit 120x ︱weight of the machine ca. 21 t︱
          5 axes machine Coolant through spindle Tool measuring system BLUM More details on www.marcels-maschinen.ch
            x-travel 800 mm
            y-travel 800 mm
            z-travel 800 mm
            Control SIEMENS 840D PL Shopmill
            milling head -swivable +/- 30/180 °
            spindle taper HSK100
            spindle turning speed range -8000 U/min
            size of pallet 2x 800x630 mm
            tool change unit 120x
            weight of the machine ca. 21 t
            Description :
            5 axes machine
            Coolant through spindle
            Tool measuring system BLUM

            More details on www.marcels-maschinen.ch
          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal HEDELIUS RS 100 K Celox


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-053657 · milling machining centers - universal

          HEDELIUS - RS 100 K Celox - - 2005 - Heidenhain iTNC 530

          Technical details
          x-travel 3500 mm︱y-travel 1000 mm︱z-travel 770 mm︱Control Heidenhain iTNC 530 ︱weight of the machine ca. 30 t︱
          L.-Nr. 5.3-657 1 gebr. CNC 5-Achsen Bearbeitungszentrum Hedelius RS 100K, Bj. 2005 1 used CNC 5-Axes Milling Center Hedelius RS 100K, built 2005 CNC Steuerung Heidenhain iTNC530 Pendelbetrieb NC-Dreh-Schwenktisch im linken Arbeitsraum (für 5-Achsen Simultanbearbeitung) fest eingebauter Tisch im rechten Arbeitsraum 30-fach Werkzeugwechsler el. Handrad IKZ (20 bar) Späneförderer CNC control Heidenhain iTNC530 shuttle service NC-swivel rotary table at the left working area (for 5-axes simultan working) fixed table at the right working area 30-fold automatic tool changer electronical hand wheel coolant through spindle device (IKZ) 20 bar chip conveyor Technische Daten / technical details: X-Weg / X-travel 3500 mm Y-Weg / Y-travel 1000 mm Z-Weg / Z-travel 770 mm A-Achse / A-axis +10 bis -90 ° C-Achse / C-axis 360 ° Spindelaufnahme / spindle taper SK50 Drehzahlbereich / spindle speed 10000 UpM /rpm Schwenk-Rundtischabmaße / swivel rotary dimension 1000 mm Störkantendurchmesser / interfering edge diameter 1100 mm Fester Tischabmaße / fixed table dimension 2100x1000 mm Werkzeugwechselmagazinplätze / number of tool places in changer 30 Gewicht ca. / weight 28000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            x-travel 3500 mm
            y-travel 1000 mm
            z-travel 770 mm
            Control Heidenhain iTNC 530
            weight of the machine ca. 30 t
            Description :
            L.-Nr. 5.3-657
            1 gebr. CNC 5-Achsen Bearbeitungszentrum Hedelius RS 100K, Bj. 2005
            1 used CNC 5-Axes Milling Center Hedelius RS 100K, built 2005

            CNC Steuerung Heidenhain iTNC530
            Pendelbetrieb
            NC-Dreh-Schwenktisch im linken Arbeitsraum (für 5-Achsen Simultanbearbeitung)
            fest eingebauter Tisch im rechten Arbeitsraum
            30-fach Werkzeugwechsler
            el. Handrad
            IKZ (20 bar)
            Späneförderer
            CNC control Heidenhain iTNC530
            shuttle service
            NC-swivel rotary table at the left working area (for 5-axes simultan working)
            fixed table at the right working area
            30-fold automatic tool changer
            electronical hand wheel
            coolant through spindle device (IKZ) 20 bar
            chip conveyor

            Technische Daten / technical details:
            X-Weg / X-travel 3500 mm
            Y-Weg / Y-travel 1000 mm
            Z-Weg / Z-travel 770 mm
            A-Achse / A-axis +10 bis -90 °
            C-Achse / C-axis 360 °
            Spindelaufnahme / spindle taper SK50
            Drehzahlbereich / spindle speed 10000 UpM /rpm
            Schwenk-Rundtischabmaße / swivel rotary dimension 1000 mm
            Störkantendurchmesser / interfering edge diameter 1100 mm
            Fester Tischabmaße / fixed table dimension 2100x1000 mm
            Werkzeugwechselmagazinplätze / number of tool places in changer 30
            Gewicht ca. / weight 28000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.




          Datasheet
          Request / Contact
          used Milling machines milling machining centers - universal DECKEL-MAHO DMU 80T


          • Brandner Revalue GmbH
          • Mozartstr. 24
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 928 58 75
            +49 (0) 7309 928 58 74
          • mb@b-rv.de
            www.b-rv.de
          #2011-2002005 · milling machining centers - universal

          DECKEL-MAHO - DMU 80T - - 2004 - Heidenhein iTNC530

          Technical details
          x-travel 880 mm︱y-travel 630 mm︱z-travel 630 mm︱Control Heidenhein iTNC530 ︱table-size 1.250x700 mm︱tool taper SK40 DIN 69871 ︱tool piece magazine with 32 ︱main drive motor 30 kw kW︱spindle turning speed range 10000 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 880 mm
            y-travel 630 mm
            z-travel 630 mm
            Control Heidenhein iTNC530
            table-size 1.250x700 mm
            tool taper SK40 DIN 69871
            tool piece magazine with 32
            main drive motor 30 kw kW
            spindle turning speed range 10000 U/min
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   


          Purchase one of several universal milling machines
          Used Universal Milling Machines from LagerMaschinen

          When choosing a machine for your newly opened or expanding business it can sometimes be overwhelming to find that new machines are far out of your price range. However production growth sometimes depends on purchasing new equipment tools and machines. In this case a used machine may be the perfect solution for you. LagerMaschinen provides a platform for buyers and sellers to have their business and budgetary needs met in an efficient manner. By purchasing universal milling machines through LagerMaschinen you'll not only be saving yourself time and money you'll also be forming connections in your field. Additionally LagerMaschinen's delivery and installation services mean your universal milling machines can be up and running in no time.

          Universal Milling Machines for every production branch.

          Universal milling machines are used in a variety of different branches of production industry. Milling machines are useful for planing drilling and keyway and slot cutting. Whether your particular industry requires a horizontal mill or vertical mill LagerMaschinen will find something within your specifications. Search in your area for the most immediate solutions and communicate with sellers to find the universal milling machines that best fit your needs. Are you looking for a CNC mill? LagerMaschinen's delivery and installation services mean you won't need to install and route computer hardware to your new universal milling machine. Search for computers and software corresponding to the CNC universal milling machines rather than purchasing these items new and spending a fortune. Find your next machine at an affordable price with LagerMaschinen.