Travelling column milling machine

x-travel 18000 mm︱y-travel 2500 mm︱z-travel 1250 mm︱Control SIEMENS-SINUMERK 840 D ︱spindle taper HSK-A 80 ︱spindle turning speed range 10 - 10000 U/min︱feeds longditudinal/cross/vertical 1 - 16000 mm/min︱drive milling spindle 31 kW︱total power requirement 65 kW︱weight of the machine ca. 0 t︱dimensions of the machine ca. 25,5 x 10 x 5,2 m︱

---

* spindle on appr. 13,721 h * CNC-control in 5 axis by SIEMENS SINUMERIK 840 D * CNC universal milling head A-axis = +-90° - C-axis = 400° (+200/-200°) * 52-fold tool changer

x-travel 6.000 mm︱y-travel 935 mm︱z-travel 1.050 mm︱Control Dr. HEIDENHAIN TNC 426 ︱table surface area 6.400 x 800 mm︱table load 20 t︱spindle taper ISO 50 ︱spindle turning speed - stepless 70 - 3.000 U/min︱feeds - automatic programming 10 - 5.000 mm/min︱rapid traverse 10 m/min︱total power requirement 50 kW︱weight of the machine ca. 40 t︱dimensions of the machine ca. m︱

---

* CNC controlled by DR. HEIDENHAIN TNC 426 * universal milling head - CNC-controlled 1°/2.5° index in B- and C-axis * universal milling head was reconditioned in 2019 * cooling through the spindle (appr. 10 bar) * cooling attachment * chip conveyor * electr. handwheel * M & H - calliper * housing * 40-fold tool changer WITHOUT HYDR. VICE YOU CAN VIEW ON THE PHOTOS !

x-travel 2600 mm︱y-travel 1100 mm︱z-travel 900 mm︱control Siemens 840D ︱turning speed range - milling 20000 U/min︱power capacity - milling spindle 25 / 35 kW︱rapid traverse X-axis 40 m/min︱rapid traverse Y-axis 40 m/min︱rapid traverse Z-axis 40 m/min︱b-axis +/- 100 °︱Tool changer 60 pos.︱table surface area 3200 x 1100 mm︱max. table load 4000 kg︱tool taper HSK A 63 ︱total power requirement 86 kVA︱weight of the machine ca. 25,5 t︱

---

equipped with: - CNC control Siemens 840D powerline - integrated rotary table dia 1100mm - chip conveyor - swivel head (B-axis) - chain magazine 60-fold (HSK A63) - Workpiece measuring mandrel - Blum laser - Oil & emulsion mist separator - Coolant system / IKZ 40bar - Blow air through spindle centre - Operating mode 3 Approx 12500h spindle hours

x-travel 3500 mm︱y-travel 1083 mm︱z-travel 1074 mm︱control HEIDENHAIN iTNC 530 HSCI ︱clamping table - ︱surface area 4.000 x 1.000 mm︱Thread bore with fitting - ︱Feeds - ︱X-, Y- and Z-axis, stepless 2 - 30.000 mm/min︱rapid travel x/y/z 30 m/min︱Max. feed force of axis 10.000 N︱2-axis Milling Head - ︱2-axis milling head TUB-E92 with power on - ︱Torque-Motors for 5-axis-simultaneos processing - ︱capacity at 100% load 29 kW︱Speed stepless 2- 30.000 ︱max. torque 92 Nm︱Max. torque 60 min-1︱tool taper HSK 62A-DIN 69893 ︱automatic tool changer ATC - ︱

---

Guides, drive and measuring systems • All axis drives with digital drives manufacturer HEIDENHAIN • Direct measuring systems for X,Y, and Z axis manufacturer HEIDENHAIN • X-, Y- and Z-axis guidance using high-precision linear guides for maximum precision and dynamics • Precision ball screw with preloaded nuts in X-, Y- and Z-axis Coolant Equipment with Chip conveyor • Coolant outlet, switchable from coolant to air, at the front of the milling head via manually swivelling nozzles • Internal coolant supply, switchable from coolant to air, through the spindle centre. • Tank volume approx. 1.000 l • Normal coolant supply 25l/min 5 bar • High pressure pump for internal cooling 20 l/min 50 bar • Coolant tank incl. Cartridge filter and paper-belt filter system • Hinged belt chip conveyor, discharge height approx. 750 mm Equipment • Machine bed, column and vertical saddle as welded steel construction, annealed with low tension • Milling slider as welded steel construction • Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive via torque motors • Oil cooling unit for cooling the milling head • CNC thermal compensation • Spindle drive 29 kW • Spindle speed max. 18.000 min-1 • Axle drives by means of precision ball screws and digital servo motors • Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and automatic measuring cycles • Milling head Measurement “Kinematics Opt” • Laser tool presetter BLUM - NT version mounted on machine table • CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology • Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable • swivelling control panel for machine operation in front of the machine • Automatic tool changer with 30 magazine places, change position vertical • Coolant system with external shower rim and IKZ through the spindle • 1 chip conveyor in the working area, ejection right • Pretensioned linear guides in all axes • Precision ball screws in all axes • Hydraulic weight compensation in the vertical axis • Bellows cover of the X-axis • Milling slide above and below in the vertical axis with bellows covers with attached stainless steel lamellas closed • Work area enclosure closed on all sides. Back side of the work area with bellows cover with attached stainless steel lamellas closed. The manual sliding doors on the front of the machine can be opened and closed over the entire length of the table. Safety fencing for the back machine area with two secured access doors.

x-travel 2600 mm︱y-travel 1100 mm︱z-travel 900 mm︱control Heidenhain iTNC 530 ︱turning speed range - milling 20 - 10.000 U/min︱power capacity - milling spindle 52/42 kW︱rapid traverse X-axis 40 m/min︱rapid traverse Y-axis 40 m/min︱rapid traverse Z-axis 40 m/min︱b-axis +/- 100 °︱Tool changer 30 pos.︱table surface area 3200 x 1100 mm︱max. table load 4000 kg︱tool taper HSK 100 ︱total power requirement 86 kVA︱weight of the machine ca. 25,5 t︱

---

delivered in 2014 equipped with: - CNC control Heidennain iTNC 530 - integrated rotary table dia 1050mm (1200kg) - Zero-point voltage system "Zero Clamp 200/13" - Chip conveyor - swivel head (B-axis) - chain magazine 60-fold (HSK 100) - Renishaw PP 60 - Blum laser - Oil & emulsion mist separator - Production package - Coolant through Spindle - Blowing air through spindle center - Preparation 3D Quick Set - Operating mode 4 approx 23700h Power on and 3880h Spindle Hours

travel -x axis 4.000 mm︱travel -y axis 1.000 mm︱travel -z axis 1.100 mm︱control Siemens 840 D ︱number of spindle speeds 10.000 U/min︱Automatic tool changer 40 Stk.︱table length 4.600 mm︱table width 1.050 mm︱Dimensions (L x W x H) 8.850 x 5.615 x 3.600 mm︱weight of the machine 31.500 kg︱

---

Travelling column milling machine | IBARMIA - ZVH 58 / L4000 The machine is in a very good condition and with only 15.400 (h) main working hours. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZVH-58 | L 4000

x-travel 14.000 mm︱y-travel 1.500 mm︱z-travel 3.000 mm︱Control Heidenhain Itnc 530 ︱total power requirement 50 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour

x-travel 8000 mm︱y-travel 1400 mm︱z-travel 2600 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

CNC control: Heidenhein tool changer: 30 tool places table size: 9000x2200 mm Sound enclosure

x-travel 4000 mm︱y-travel 1200 mm︱z-travel 800 mm︱Control HEIDENHAIN TNC 530︱weight of the machine ca. 36 t︱dimensions of the machine ca. 10620x6520x3100 m︱

---

Traveling column milling machine Keppler FSH 400 Commissioning was in KW 47/2011 - The machine is equipped with a WZ magazine with 60 places. - The machine is with a 7,000 rpm spindle, - and a 1,000l coolant tank with 60bar IKZ. - The machine has approximately 13,800 operating hours and 12,500 spindle hours. - 2 x oil mist extraction. - Flush gun for machine room cleaning.

x-travel 4000 mm︱y-travel 1200 mm︱z-travel 800 mm︱Control HEIDENHAIN TNC 530︱weight of the machine ca. 36 t︱dimensions of the machine ca. 10620x6520x3100 m︱

---

Traveling column milling machine Keppler FSH 400 Commissioning was in KW 22/2010. - The machine is equipped with a WZ magazine with 60 places. - The machine is with a 7,000 rpm spindle, - and a 1,000l coolant tank with 60bar IKZ. - The machine has approximately 13,800 operating hours and 12,500 spindle hours. - 2 x oil mist extraction. - Flush gun for machine room cleaning.

x-travel 2600 mm︱y-travel 700 mm︱z-travel 700 mm︱control Heidenhain iTNC 530 ︱turning speed range - milling 18000 U/min︱power capacity - milling spindle kW︱rapid traverse X-axis 40 m/min︱rapid traverse Y-axis 40 m/min︱rapid traverse Z-axis 40 m/min︱b-axis +/- 100 °︱Tool changer 60 pos.︱table surface area 2900 x 700 mm︱max. table load 4000 kg︱tool taper HSK 63 ︱total power requirement 86 kVA︱weight of the machine ca. 27 t︱

---

- CNC control Heidennain iTNC 530 - integrated rotary table dia 750mm - Chip conveyor - swivel head (B-axis) - chain magazine 60-fold (HSK 63) - Infrared Measuring - Blum laser - Dynamic Package - Production Package - Coolant through Spindle - Operating mode 4 approx 21200h Power on and 10500h Program Run Hours

x-travel 3.000 mm︱y-travel 600 mm︱z-travel 800 mm︱control iTNC 530 Heidenhain︱Main spindle: ︱turning speed range - main spindle max. 12.000 min/-1︱power capacity - main spindel 30 / 16 kW︱max. Torque 100 Nm︱tool taper SK 40 ︱swivellable +/- 105 °︱indexing 0,001 °︱work table: ︱table surface area 3.500 x 650 mm︱Tool-Presetter: ︱number of toolpositions 48 pos.︱feeds: ︱rapid traverse ( X / Y / Z ) 30 m/min︱feed speeds 30.000 mm/min︱total power requirement 52 kW︱weight of the machine ca. 19,0 t︱

---

CNC - Travel Column Milling Machine MATEC - 30 HV - Swivable-Milling-Head - 2014 completely overhauld / 2019 Spindle overhauld - Separating-Wall / Double-Place-System - WITHOUT vices / WITHOUT tools

x-travel 3500 mm︱y-travel 1100 mm︱z-travel 1500 mm︱Control Heidenhain iTNC530 s.p. ︱max. power capactiy 25 kW︱turning speed range 380 - 7000 U/min︱max. torque 620 Nm︱total power requirement 62 kW︱dimensions of the machine ca. 8,4 x 5,2 x 3,8 m︱

---

Equipment / Accessories: good condition - 12380 spindle hours - as of February 2021 - Preparation for rotary table axis motor, drive, measuring system and rotary table are not included here. - Automatically indexable universal head with double Hirth serration 360 positions 1 ° - Tool magazine with 24 places ISO 50 (right side of the table) The magazine takes up approx. 100 mm of the X-travel of the machine. - Tool magazine with 40 places ISO 50 (left side of the table) The magazine takes up approx. 100 mm of the X-travel of the machine. - Low pressure cooling for the outside of the tool (max. 8 bar) and high pressure cooling for the inside of the tool (max. 20 bar) with paper band filter and adjustment by potentiometer device for transferring the cooling lubricant to the tools for the universal heads and for the extensions capacity 28 l/min, pressure 20 bar, contents of the container 980 l - Fully enclosed with roof - a double safety sliding door on the front of the table enables loading and unloading from above. - Chip conveyor with ejection on the left side - Portable hand-held control unit with display for Heidenhain - Lighting of work area - Operating mode 3 - extended, with key switch speed max. 2000 1/min and feed 2000 mm/min - Spray pistol for cleaning the workpiece - Static RTCP software in the levels - AUTOCAL for automatic calibration - Measuring probe for workpiece measurement - Teleservice (remote diagnosis) - Tapping without compensating chuck for milling heads - Twin machining with a partition - Laser tool measurement for tool length and diameter Probe for measurement including software - 2 ROTOCLEAR Visiport windows

travel -x axis 7.500 mm︱travel -y axis 1.400 mm︱travel -z axis 1.000 mm︱control HEIDENHAIN - iTNC 530 ︱rapid traverse 25.000 mm/min︱- - - spindle - - - - - - - - -︱engine output 28 kW︱transmission ratio 15 ÷ 4.000 U/min︱- - - NC rotary table - - - - - - - - -︱rotary table: DEMMELER - DRLN 1.800 ︱Size of table plate 2.000 x 2.000 mm︱total wight 10.000 kg︱0 20.000 kg︱

---

Travelling column milling machine Soraluce FL 8000 Additional equipment: - 2 pieces of clamping plates à 5.000 x 2.000 mm - large tool holder package (see pictures) - rotary table: DEMMELER (2.000 x 2.000 mm) The machine is in a well-maintained condition. Machine video available on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FL8000 | FL-8000

x travel 10000 mm︱y travel 2200 mm︱z travel 1300 mm︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 5 ︱- X-axis travel 10000 mm︱- Y-axis travel 2200 mm︱- Z-axis travel 1300 mm︱MILLING SPINDLE / HEAD ︱- tool fixture: HSK A100 ︱- drive power 43 kW︱AXIS DRIVES ︱- feed velocity (min) 35000 mm/min︱TOOL MAGAZINE ︱- number of positions 60 ︱DIMENSIONS / WEIGHTS ︱- total weight approx. 23000 kg︱ATTACHMENTS ︱- European CE standards: yes ︱

---

Column Moving 3 + 2 Axis CNC Milling Machines with Floor Table Column moving milling machines with floor table are multi-purpose milling machines, providing exceptional flexibility and efficiency in your production. Thanks to its modular design, it maximizes your production possibilities by meeting ever-changing and evolving user demands. Thanks to the automatic index heads, floor tables, turntables, miter and many optional features and accessories, it is now possible to process workpieces that you have worked on many machines in the past in a single connection in a very short time on SORALUCE machines. Regardless of the weight of your part, you can see excellent performance even in roughing or precision machining. When testing its speed at 35 meters per minute, you can be sure of safety.

x-travel 5.000 mm︱y-travel 1.500 mm︱z-travel 3.000 mm︱Control HEIDENHAINT TNC-530 ︱table surface area 5000 x 2500 mm︱rapid travel x/y/z 30.000 mm/min︱tool change unit 60 Pos.︱milling head Orthogonal 45 °︱number of spindle speeds 20 - 4.000 U/min/rpm︱positive location each 1/2.5 °︱spindle drive 35 kW︱Internal cooling system 20 bar︱handwheel HR-410 ︱Chip coveyor Inkl. ︱transmission ratio 2 ︱total power requirement 85 Kva︱weight of the machine ca. 56 t︱

---

- HEIDENHAINT TNC-530 - 4 - Axi Horizontal Spirsin 2000 x 2000 mm - Rotary table support 12.000 Kg

x-travel 5.300 mm︱y-travel 1.500 mm︱z-travel 2.000 mm︱surface area 6.000 x 1.200 mm︱table height 925 mm︱feeds 10 - 6.000 mm/min︱rapid traverse X- and Y-axis 15.000 mm/min︱rapid traverse Z-axis 10.000 mm/min︱a-axis +45 bis -225 °︱b-axis +165 bis -180 °︱power capacity 28 (S1) kW︱power capacity 38 (S2) kW︱Torque 1.880 (S1) Nm︱Torque 1.385 (S2) Nm︱turning speed range 60 - 5.000 U/min︱clamping capacity max. 8.000 kg︱external spindle dia. in forward position 140 mm︱spindle diameter in front bearing 90 mm︱taper SK 50 DIN 69871 ︱Bolt DIN 69872-B ︱

---

x-travel 5.300 mm︱y-travel 1.500 mm︱z-travel 2.000 mm︱surface area 6.000 x 1.200 mm︱table height 925 mm︱feeds 10 - 6.000 mm/min︱rapid traverse X- and Y-axis 15.000 mm/min︱rapid traverse Z-axis 10.000 mm/min︱a-axis +45 bis -225 °︱b-axis +165 bis -180 °︱power capacity 28 (S1) kW︱power capacity 38 (S2) kW︱Torque 1.880 (S1) Nm︱Torque 1.385 (S2) Nm︱turning speed range 60 - 5.000 U/min︱clamping capacity max. 8.000 kg︱external spindle dia. in forward position 140 mm︱spindle diameter in front bearing 90 mm︱taper SK 50 DIN 69871 ︱Bolt DIN 69872-B ︱

---

Überholt 2021

CNC brand Heidenhain ︱Table length 5000 mm︱Table width 2000 mm︱X 5000 mm︱Y 3100 mm︱Z 1200 mm︱Spindle taper HSK 63 ︱Speed 18000 RPM︱Tool changer 24 ︱Distance between columns 2800 mm︱Machine dimensions (lxwxh) 15000 x 6200 x 6000 mm︱Machine weight 65000 kg︱

---

5-axis machine

x-travel 5.000 mm︱y-travel 1.250 mm︱z-travel 2.000 mm︱table-size 5.000 X 2.000 mm︱Control HEIDENHAIN TNC 430︱rapid travel x/y/z 15.000 mm/min︱feeds 5.000 mm/min︱tool taper ISO-50 ︱transmission ratio 2 ︱engine output 37 kW︱number of spindle speeds 20 - 6.000 ︱Internal cooling system 20 bar︱Chip coveyor Inkl. ︱handwheel HR-410 ︱total power requirement kW︱weight of the machine ca. 42 t︱dimensions of the machine ca. m︱

---

- Speed Range 2 Ranges - Main Motor Power 37 Kw. - Turning Speeds Head 45º 20 - 6.000 r.p.m. - Turning Speeds Direct Output Head 20 - 6.000 r.p.m. - Automatic Head 45º 0.001º/0.001º - Direct Output Head INCLUIDO/ INCLUDED - Pick-up Station for head Changing INCLUDED - Coolant Through Tool 20 Bar INCLUDED. - Double Rack Pinion System INCLUDED - Longitudinal Chip Conveyor INCLUDED - Lateral Platform for Operator INCLUDED

x-travel 10500 mm︱y-travel 2750 mm︱y-travel (3350) mm︱z-travel 1500 mm︱turning speeds 3500 U/min︱Tool changer 80 ︱Control Heidenhain TNC 430 M︱positioning accuracy 1 °︱milling-head swivable +/- CNC ︱Plate area 12000x2500 mm︱chip conveyor ︱spindle taper ISO 50 ︱Spindle capacity 37 KW︱Feed 6000 mm/min︱Rapid movement 15000 mm/min︱total power requirement kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 18,1x6,7 m︱

---

CNC angle head 360 ° with 1 ° Hirtverzahnung spindle hours 13500

x-travel 10500 mm︱y-travel 2750 mm︱y-travel (3350) mm︱z-travel 1500 mm︱turning speeds 3500 U/min︱Tool changer 80 ︱Control Heidenhain TNC 430 M︱positioning accuracy 1 °︱milling-head swivable +/- CNC ︱Plate area 12000x2500 mm︱chip conveyor ︱spindle taper ISO 50 ︱Spindle capacity 37 KW︱Feed 6000 mm/min︱Rapid movement 15000 mm/min︱total power requirement kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 18,1x6,7 m︱

---

CNC angle head 360 ° with 1 ° Hirtverzahnung spindle hours 13500

x-travel 16300 mm︱y-travel 2600 mm︱z-travel 1600 mm︱Control Heidenhain ︱type TNC 430 ︱tool taper ISO 50 ︱spindle turning speed range 22-4000 U/min︱feed in x - axis 36000 mm/min︱feed in y - axis 24000 mm/min︱feed range Z-direction 24000 mm/min︱main drive motor 37 kW︱Tool changer 90 ︱coolant ︱ ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 4.200 (+150) mm︱y-travel 1.100 (+150) mm︱z-travel 1.000 mm︱Control Fidia C20 (Windows 10) ︱Main spindle: ︱turning speed range - main spindle 240 - 24.000 min/-1︱power capacity - main spindel 32 / 27 kW︱max. Torque 41 Nm︱tool taper HSK-63 ︱spindle bearing diameter 65 mm︱swivellable A: +40°/-110 / 0,001 ° °︱rotatable C: +/- 180 / 0,001 ° °︱axis adjustment +/- 75 mm︱work table: ︱table surface area 5.000 x 1.500 mm︱max. table load 20.000 kg︱T-slots 6x 22H11 x 250 mm︱tool magazin: ︱number of toolpositions 42 pos.︱tool taper HSK-63 ︱

---

5-Axis-CNC-Travel-Column-Milling-Machine FIDIA - K 411 - 2-Axis-Shaft-Milling-Head (turnable/swivable) - only ca. 3.000h Spindle-hrs. - Control update to Windows 10 - X: 4.350 mm / Y: 1.250mm / Z: 1.000mm