Réseau européen de revendeurs de machines de stockage

Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Metal Processing - Planer-Type Milling M-C - Double Column

          Machinelist: Fraiseuse de type raboteuse M / C - Double colonne


          Planer-Type Milling M/C - Double Column

          Fraiseuses Fraiseuse de type raboteuse M / C - Double colonne CARNAGHI 8000


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1110016 · Planer-Type Milling M/C - Double Column

          CARNAGHI - 8000 - - NB -

          Technical details
          x-travel 8000 mm︱y-travel 2000 mm︱z-travel 1600 mm︱total power requirement 75 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1110016 Type of machine PLaner Milling machine Make CARNAGHI Type 8000 Type of control Conventional Table dimensions (mm) 8000 x 1800 X-stroke (mm) 8000 Y-stroke (mm) 2000 Z-stroke (mm) 1600 Table load max. 25.000 kg Speeds (Rpm) 0.5 - 3000 Admission in spindlehead Iso 50 Total Power (KW)
            x-travel 8000 mm
            y-travel 2000 mm
            z-travel 1600 mm
            total power requirement 75 kW
            Description :
            Stocknumber 1110016
            Type of machine PLaner Milling machine
            Make CARNAGHI
            Type 8000
            Type of control Conventional
            Table dimensions (mm) 8000 x 1800
            X-stroke (mm) 8000
            Y-stroke (mm) 2000
            Z-stroke (mm) 1600
            Table load max. 25.000 kg
            Speeds (Rpm) 0.5 - 3000
            Admission in spindlehead Iso 50
            Total Power (KW)

          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Double colonne WALDRICH COBURG 17-10 FP 225


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09949 · Planer-Type Milling M/C - Double Column

          WALDRICH COBURG - 17-10 FP 225 - - 85/2003 - SIEMENS 840D

          Technical details
          x-travel 6600 mm︱y-travel 3200 mm︱z-travel 1000 mm︱w-axis 1750 mm︱spindle motor 55 kW︱spindle turning speed range 5 - 2000 U/min︱spindle taper ISO 60 ︱spindle diameter in front bearing 170 mm︱table lenght 1 + 2 6400 mm︱table width 2250 mm︱daylight between the side columns 2650 mm︱table load 50 t︱no. of tools in the magazine 60 Stück︱distance spindle nose and table 2500 mm︱control SIEMENS 840D ︱feed range - table 10 - 15000 mm/min︱feeds crossrail-slide horizontal 10 - 10000 mm/min︱feed in w - axe 10 - 2000 mm/min︱total power requirement 85 kW︱weight of the machine ca. 125 t︱
          Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90° indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device
            x-travel 6600 mm
            y-travel 3200 mm
            z-travel 1000 mm
            w-axis 1750 mm
            spindle motor 55 kW
            spindle turning speed range 5 - 2000 U/min
            spindle taper ISO 60
            spindle diameter in front bearin. 170 mm
            table lenght 1 + 2 6400 mm
            table width 2250 mm
            daylight between the side column. 2650 mm
            table load 50 t
            no. of tools in the magazine 60 Stück
            distance spindle nose and table 2500 mm
            control SIEMENS 840D
            feed range - table 10 - 15000 mm/min
            feeds crossrail-slide horizontal 10 - 10000 mm/min
            feed in w - axe 10 - 2000 mm/min
            total power requirement 85 kW
            weight of the machine ca. 125 t
            Description :
            Machine general overhauled and equipped with SIEMENS 840 D control in 2003

            - new digital motors, drive controllers, measuring systems and switch cabinet
            - tool changer for 60 tools (45 ISO 50, 15 ISO 60)
            - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90°
            indexing
            - hydrostatic table guideways
            - adjustable crossrail
            - 2 tables coupled
            - chip conveyor
            - coolant device
          Datasheet
          Request / Contact
          Fraiseuses de type raboteuse M / C - Double colonne REICHLE & KNOEDLER d'occasion


          • Meister Maschinen
          • Overhagener Weg 44
          • 59597 Erwitte
          • Deutschland

          • +49 (0) 2943-870946
            +49 (0) 2943-870885
          • info@meister-maschinen.com
            www.meister-maschinen.com
          #2005-102011 · Planer-Type Milling M/C - Double Column

          REICHLE & KNOEDLER - - - 79/99 - konventionell

          Technical details
          x-travel 2650 mm︱y-travel 1270 mm︱z-travel 1000 mm︱total power requirement kW︱weight of the machine ca. 25 t︱required space m︱
            x-travel 2650 mm
            y-travel 1270 mm
            z-travel 1000 mm
            weight of the machine ca. 25 t
          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Double colonne MATTEC XXX


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-5302 · Planer-Type Milling M/C - Double Column

          MATTEC - X-X-X - - 2019 - (Heidenhain/Siemens/ Fanuc)

          Technical details
          x-travel (5.000 - 40.000) mm︱y-travel (1.000 - 4.500) mm︱z-travel (1.000 - 1.600) mm︱control (Heidenhain/Siemens/ Fanuc)︱Main spindle: ︱turning speed range - main spindle (- 5.000) min/-1︱power capacity - main spindel (- 30) kW︱max. Torque (350) Nm︱tool taper (SK 50/SK 40) ︱swivellable (+/- 90) °︱Tool changer (25 - 380) pos.︱rapid traverse (20) m/min︱total power requirement - kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
          CNC - Planer-Type Milling MC - Double Column MATTEC - X-X-X Machines, individual configurable due to your requirements and local situation. The construction and environment of these plants will be done in expandable modules, what will be a garanty for a high level of flexibility in any respect. Every single plant will be constructed in reconciliation and collaboration with the customer. German High-Level-Machine-Engineering! Please get in contact with us for more information! We will help you to realize your optimized and individual solution!
            x-travel (5.000 - 40.000) mm
            y-travel (1.000 - 4.500) mm
            z-travel (1.000 - 1.600) mm
            control (Heidenhain/Siemens/ Fanuc)
            turning speed range - main spind. (- 5.000) min/-1
            power capacity - main spindel (- 30) kW
            max. Torque (350) Nm
            tool taper (SK 50/SK 40)
            swivellable (+/- 90) °
            Tool changer (25 - 380) pos.
            rapid traverse (20) m/min
            total power requirement - kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m
            Description :
            CNC - Planer-Type Milling MC - Double Column
            MATTEC - X-X-X

            Machines, individual configurable due to your requirements and local situation.
            The construction and environment of these plants will be done in expandable
            modules, what will be a garanty for a high level of flexibility in any respect.
            Every single plant will be constructed in reconciliation and collaboration with
            the customer.

            German High-Level-Machine-Engineering!

            Please get in contact with us for more information!
            We will help you to realize your optimized and individual solution!
          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Double colonne KAFO RV 5140


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17770 · Planer-Type Milling M/C - Double Column

          KAFO - RV 5140 - - 2017 - Fanuc 0i-MF

          Technical details
          x-travel 5100 mm︱y-travel 4000 mm︱z-travel 1300 mm︱distance between columns 3500 mm︱distance table - lower edge spindle 200 - 1500 mm︱table-size 5000 x 2900 mm︱table load 20 t︱spindle motor 22 / 26 kW︱spindle turning speed range 4000 U/min︱tool taper BT 50 ︱feed in x - axis 12 mm/min︱feed in y - axis 20 mm/min︱feed range Z-direction 15 mm/min︱w-axis mm︱control Fanuc 0i-MF ︱total power requirement kVA︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Portal milling machine equipped with: - CNC Control FANUC 0i-MF (10.4" LCD) - ATC 60-fold (BT 50) - DATA SERVER+AICC II - Auto head storage: 90 degree head with auto 5° indexing (spindle speed: 4000rpm/air thru spindle/coolant thru spindle) - Air thru spindle - X/Y/Z axis linear guide way - X/Y/Z axes HEIDENHAIN linear scale - Air conditioner for electrical cabinet - Oil skimmer - Fully enclosed guard - Screw cooling system - Spindle oil cooler - Chip conveyer
            x-travel 5100 mm
            y-travel 4000 mm
            z-travel 1300 mm
            distance between columns 3500 mm
            distance table - lower edge spin. 200 - 1500 mm
            table-size 5000 x 2900 mm
            table load 20 t
            spindle motor 22 / 26 kW
            spindle turning speed range 4000 U/min
            tool taper BT 50
            feed in x - axis 12 mm/min
            feed in y - axis 20 mm/min
            feed range Z-direction 15 mm/min
            control Fanuc 0i-MF
            Description :
            Portal milling machine equipped with:
            - CNC Control FANUC 0i-MF (10.4" LCD)
            - ATC 60-fold (BT 50)
            - DATA SERVER+AICC II
            - Auto head storage: 90 degree head with auto 5° indexing (spindle speed:
            4000rpm/air thru spindle/coolant thru spindle)
            - Air thru spindle
            - X/Y/Z axis linear guide way
            - X/Y/Z axes HEIDENHAIN linear scale
            - Air conditioner for electrical cabinet
            - Oil skimmer
            - Fully enclosed guard
            - Screw cooling system
            - Spindle oil cooler
            - Chip conveyer
          Datasheet
          Request / Contact
          Fraiseuses de type raboteuse M / C - double colonne HURON KX 300 d'occasion


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08396 · Planer-Type Milling M/C - Double Column

          HURON - KX 300 - - 2017 - Heidenhain iTNC 530

          Technical details
          x-travel 5000 mm︱y-travel 3100 mm︱z-travel 1500 mm︱Control Heidenhain iTNC 530 ︱spindle turning speed range 18000 U/min︱table surface area 5200 x 2000 mm︱table load 20 t︱total power requirement kW︱weight of the machine ca. 100 t︱dimensions of the machine ca. m︱ATC (tool changer) 60-fach (pos.)
          5-Axes Plano MIlling Machine
            x-travel 5000 mm
            y-travel 3100 mm
            z-travel 1500 mm
            Control Heidenhain iTNC 530
            spindle turning speed range 18000 U/min
            table surface area 5200 x 2000 mm
            table load 20 t
            weight of the machine ca. 100 t
            ATC (tool changer) 60-fach (pos.)
            Description :
            5-Axes Plano MIlling Machine
          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Colonne double FPT Dinox 350 IAT


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17729 · Planer-Type Milling M/C - Double Column

          FPT - Dinox 350 IAT - - 2016 - Heidenhain TNC 640

          Technical details
          x-travel 2500 mm︱y-travel 3500 mm︱z-travel 1300 mm︱Control Heidenhain TNC 640 ︱table-size 3500 x 2500 mm︱table load t︱spindle turning speed range 22.000 U/min︱tool taper HSK A 63 ︱feed 40.000 mm/min︱spindle motor 33 kW︱A-Axis +/- 185 °︱c-axis +/- 185 °︱distance between columns 4500 mm︱Passage height 2150 mm︱electrics - voltage/frequency 400 / 60 V/Hz︱total power requirement 95,2 kW︱weight of the machine ca. - t︱dimensions of the machine ca. 7,6 x 6 x 5,1 m︱
          equipped with: - CNC Control Heidenhain TNC 640 - Universal Milling Head Tupce (2 Axis) for 5-Axis Machining - ATC 60-fold (HSK A63) - CE Sign - Coolant (40bar internal / 4 bar external) - Tool spray mist - Compressed air through spindle - Folding-type cover of the cabin - Laser probe complete with software - AUTOCAL software for automatic callbration - Touch probe for workpieve measuring and alignment - 3D mathematical model of the machine, simplified in STEP format, for CAD use
            x-travel 2500 mm
            y-travel 3500 mm
            z-travel 1300 mm
            Control Heidenhain TNC 640
            table-size 3500 x 2500 mm
            spindle turning speed range 22.000 U/min
            tool taper HSK A 63
            feed 40.000 mm/min
            spindle motor 33 kW
            A-Axis +/- 185 °
            c-axis +/- 185 °
            distance between columns 4500 mm
            Passage height 2150 mm
            electrics - voltage/frequency 400 / 60 V/Hz
            total power requirement 95,2 kW
            weight of the machine ca. - t
            dimensions of the machine ca. 7,6 x 6 x 5,1 m
            Description :
            equipped with:
            - CNC Control Heidenhain TNC 640
            - Universal Milling Head Tupce (2 Axis) for 5-Axis Machining
            - ATC 60-fold (HSK A63)
            - CE Sign
            - Coolant (40bar internal / 4 bar external)
            - Tool spray mist
            - Compressed air through spindle
            - Folding-type cover of the cabin
            - Laser probe complete with software
            - AUTOCAL software for automatic callbration
            - Touch probe for workpieve measuring and alignment
            - 3D mathematical model of the machine, simplified in STEP format, for CAD use

          Datasheet
          Request / Contact
          Fraiseuses d'occasion Fraisage type raboteuse M / C - Double colonne FOOKE ENDURA 704 LINEAR


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1607 · Planer-Type Milling M/C - Double Column

          FOOKE - ENDURA 704 LINEAR - - 2015 - HEIDENHAIN iTNC 530 HSCI

          Technical details
          x-travel 2200 mm︱y-travel 3500 mm︱z-travel 1500 mm︱Control HEIDENHAIN iTNC 530 HSCI ︱clamping table 3500 x 2100 mm︱T-slots 22 ︱max. load 1000 kg/m2︱feed X/Y/Z axis 5-65.000 mm/min︱rapid traverse X/Y/Z axis 65.000 mm/min︱speeding up max. 3,5 m/sec2︱fork milling head no. 4, torque motor drives : ︱A-axis (spindel swivel axis) . ︱swivel angle 220 +/-110 °︱swivel torque (simultaneous) 500 Nm︱holding force (clamped) 3000 Nm︱speed 360 °/sec︱axis acceleration 800 °/sec2︱direct measuring system - distance coded . ︱C-axis (milling head rotation axis) . ︱swivel angle 550 +/-275 °︱
          Guides, drive and measuring systems - All linear axes with linear motors make SIEMENS - water-cooled - Both rotary axes of the milling head with torque motors - Direct measuring systems for X, Y and Z axes made by HEIDENHAIN - X-, Y- and Z-axis guidance by means of high-precision linear guides for highest precision and dynamics Chip conveyor - 1 pc. hinged belt chip conveyor installed in Y-direction in front of the machine table - Drop-off height approx. 1.100 mm Coolant equipment make KNOLL 450 S-2 - tank volume approx. ca. 950 l - Internal coolant supply max. 40 l/min 60 bar - External coolant supply max. 70 l/min 10 bar Equipment / Accessories - Highly dynamic Gantry-high-bed Portal Milling Machine in compact design Portal moving in X direction. - Machine bed in rigid cast iron, side walls, cross slide and portal as welded steel construction, walking beam in cast iron. - Foundationless installation of the machine. Due to the inherently rigid machine bed, only a standard industrial floor, approx. 300 mm thick, steel-reinforced, is sufficient for installation. A special foundation, however, is not required. The machine is installed and aligned by means of fixators with anchor bolts. - The linear axes (X,Y,Z) are equipped with water-cooled linear motors made by SIEMENS. The X-axis is designed as a GANTRY-axis. - The linear and rotary axes are equipped with direct measuring systems. - The Z-axis drive is supported by highly dynamic pneumatic cylinders (weight compensation). - The linear axes are equipped with a safety system which brakes and safely holds the axes in case of voltage loss. The linear axes are equipped with hardened and ground, backlash-free preloaded linear-guideways. - The guideways are protected by bellows. - All guideways as well as the counterbalance cylinders, which have to be lubricated with grease or oil, are equipped with catching systems so that excess lubricant is collected in a controlled manner and the workpieces cannot be contaminated. The workroom is closed all around. - A top cover prevents dust form escaping unhinderd from the work area and also limits the upward flight of chips. - The front part of the cover (loading side of the machine) can be manually unlocked or locked so that the machine can be loaded and unloaded by crane or forklift truck. - The working area is illuminated with fluorescent tubes (IP 54, protected against water jets and solid foreign bodies). - 2-axis simultaneous fork-milling-head No. 4, - high frequency milling spindle make FISCHER, 24.000 min-1, HSK 63 - CNC-control HEIDENHAIN iTNC 530 HSCI - Portable electronic hand wheel (radio) -68-fold tool changer -Compact coolant system make KNOLL -3-D radio probe make M&H, Type 20.41 MULTI -Laser tool control system HEIDENHAIN, Type TL Micro 300 -Emulsion mist exhausting system -Prepared for additional external exhausting system -Chip conveyor -Milling head mechanics overhauled -All bellows renewed -Roller Blinds overhauled -Change of milling spindle on 25.Oct.2018 at 9.911 spindle hours -Operating hours: control ON 38.595 h, Machine ON 32.535 h, Prog.Run 13.390 h, Spindle 13.466 h, Axes 13.230 h
            x-travel 2200 mm
            y-travel 3500 mm
            z-travel 1500 mm
            Control HEIDENHAIN iTNC 530 HSCI
            clamping table 3500 x 2100 mm
            T-slots 22
            max. load 1000 kg/m2
            feed X/Y/Z axis 5-65.000 mm/min
            rapid traverse X/Y/Z axis 65.000 mm/min
            speeding up max. 3,5 m/sec2
            fork milling head no. 4, torque . :
            A-axis (spindel swivel axis) .
            swivel angle 220 +/-110 °
            swivel torque (simultaneous) 500 Nm
            holding force (clamped) 3000 Nm
            speed 360 °/sec
            axis acceleration 800 °/sec2
            direct measuring system - distan. .
            C-axis (milling head rotation ax. .
            swivel angle 550 +/-275 °
            Description :
            Guides, drive and measuring systems
            - All linear axes with linear motors make SIEMENS - water-cooled
            - Both rotary axes of the milling head with torque motors
            - Direct measuring systems for X, Y and Z axes made by HEIDENHAIN
            - X-, Y- and Z-axis guidance by means of high-precision linear guides for
            highest precision and dynamics

            Chip conveyor
            - 1 pc. hinged belt chip conveyor installed in Y-direction in front of the
            machine table
            - Drop-off height approx. 1.100 mm

            Coolant equipment make KNOLL 450 S-2
            - tank volume approx. ca. 950 l
            - Internal coolant supply max. 40 l/min 60 bar
            - External coolant supply max. 70 l/min 10 bar

            Equipment / Accessories
            - Highly dynamic Gantry-high-bed Portal Milling Machine in compact design
            Portal moving in X direction.
            - Machine bed in rigid cast iron, side walls, cross slide and portal as welded
            steel construction, walking beam in cast iron.
            - Foundationless installation of the machine. Due to the inherently rigid
            machine bed, only a standard industrial floor, approx. 300 mm thick,
            steel-reinforced, is sufficient for installation. A special foundation,
            however, is not required. The machine is installed and aligned by means of
            fixators with anchor bolts.
            - The linear axes (X,Y,Z) are equipped with water-cooled linear motors made by
            SIEMENS. The X-axis is designed as a GANTRY-axis.
            - The linear and rotary axes are equipped with direct measuring systems.
            - The Z-axis drive is supported by highly dynamic pneumatic cylinders (weight
            compensation).
            - The linear axes are equipped with a safety system which brakes and safely
            holds the axes in case of voltage loss. The linear axes are equipped with
            hardened and ground, backlash-free preloaded linear-guideways.
            - The guideways are protected by bellows.
            - All guideways as well as the counterbalance cylinders, which have to be
            lubricated with grease or oil, are equipped with catching systems so that
            excess lubricant is collected in a controlled manner and the workpieces cannot
            be contaminated. The workroom is closed all around.
            - A top cover prevents dust form escaping unhinderd from the work area and also
            limits the upward flight of chips.
            - The front part of the cover (loading side of the machine) can be manually
            unlocked or locked so that the machine can be loaded and unloaded by crane or
            forklift truck.
            - The working area is illuminated with fluorescent tubes (IP 54, protected
            against water jets and solid foreign bodies).
            - 2-axis simultaneous fork-milling-head No. 4,
            - high frequency milling spindle make FISCHER, 24.000 min-1, HSK 63
            - CNC-control HEIDENHAIN iTNC 530 HSCI
            - Portable electronic hand wheel (radio)
            -68-fold tool changer
            -Compact coolant system make KNOLL
            -3-D radio probe make M&H, Type 20.41 MULTI
            -Laser tool control system HEIDENHAIN, Type TL Micro 300
            -Emulsion mist exhausting system
            -Prepared for additional external exhausting system
            -Chip conveyor
            -Milling head mechanics overhauled
            -All bellows renewed
            -Roller Blinds overhauled
            -Change of milling spindle on 25.Oct.2018 at 9.911 spindle hours
            -Operating hours: control ON 38.595 h, Machine ON 32.535 h, Prog.Run 13.390 h,
            Spindle 13.466 h, Axes 13.230 h
          Datasheet
          Request / Contact
          Fraiseuses de type raboteuse M / C - double colonne CORREA-ANAYAK Versa 55 d'occasion


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17870 · Planer-Type Milling M/C - Double Column

          CORREA-ANAYAK - Versa 55 - - 2014 - Heidenhain iTNC 530

          Technical details
          x-travel 5500 mm︱y-travel 5000 mm︱z-travel 1500 mm︱Control Heidenhain iTNC 530 ︱table-size 5700 x 3000 mm︱table weight 30 t︱distance between columns 4100 mm︱feed 0-30.000 m/min︱milling head CAC 2 ︱number of spindle speeds 24.000 U/min/rpm︱spindle drive 37 kW︱rapid travel x/y/z mm/min︱total power requirement 94 kW︱weight of the machine ca. 82 t︱dimensions of the machine ca. m︱
          5 - AXES PORTAL MILLING MACHINE - CNC control Heidenhain iTNC 530 and hand wheel HR 410 - Milling head bearing for 2 milling heads - OAD AUTOMATIC ORTHOGONAL head (1,300Nm 52KW 6000 rpm Iso50) - E5E 5-axis head (60NM 37KW 24.000 rpm HSK63) - 60-fold tool changer (combined (ISO 50/HSK 63) - 2 chip conveyors - Coolant system (external 7bar / IKZ 70bar) - Workpiece measurement M&H 20.41 - Tool measurement M&H 35.50 ca 13.600h switch-on & ca 9400h spindle hours
            x-travel 5500 mm
            y-travel 5000 mm
            z-travel 1500 mm
            Control Heidenhain iTNC 530
            table-size 5700 x 3000 mm
            table weight 30 t
            distance between columns 4100 mm
            feed 0-30.000 m/min
            milling head CAC 2
            number of spindle speeds 24.000 U/min/rpm
            spindle drive 37 kW
            total power requirement 94 kW
            weight of the machine ca. 82 t
            Description :
            5 - AXES PORTAL MILLING MACHINE
            - CNC control Heidenhain iTNC 530 and hand wheel HR 410
            - Milling head bearing for 2 milling heads
            - OAD AUTOMATIC ORTHOGONAL head (1,300Nm 52KW 6000 rpm Iso50)
            - E5E 5-axis head (60NM 37KW 24.000 rpm HSK63)
            - 60-fold tool changer (combined (ISO 50/HSK 63)
            - 2 chip conveyors
            - Coolant system (external 7bar / IKZ 70bar)
            - Workpiece measurement M&H 20.41
            - Tool measurement M&H 35.50

            ca 13.600h switch-on & ca 9400h spindle hours

          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Colonne double FOOKE Endura 704 Linear


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17920 · Planer-Type Milling M/C - Double Column

          FOOKE - Endura 704 Linear - - 2014 - Heidenhain iTNC 530 HSCI

          Technical details
          x-travel 2200 mm︱y-travel 3500 mm︱z-travel 1200 mm︱control Heidenhain iTNC 530 HSCI ︱Main spindle: ︱turning speed range - main spindle 24000 min/-1︱power capacity - main spindel 42 / 48 kW︱tool taper HSK 63 A ︱max. Torque 67 / 76 Nm︱swivellable A: +/- 110 °︱rotatable C: +/- 275 °︱work table: ︱table surface area 2100 x 3500 mm︱max. workpiece weight 5.000 kg︱Tool-Presetter: ︱number of toolpositions 68 pos.︱tool taper HSK 63 A ︱feeds: ︱rapid traverse ( X / Y / Z ) 65 m/min︱rapid traverse A: 8 1/min︱
          5 simultanous axis CNC portal milling machine equipped with: - CNC control Heidenhain iTNC 530 HSCI & HR 520 - Milling head FK 4 - 42kW Fischer spindle - 68-fold tool changer (HSK-A 63) - KSS Coolant (IKZ 60bar / AKZ 10bar) - Chip conveyor - Workpiece Measuring M&H Inprocess Messtechnik, Typ 20.41 MULTI - Laser-Tool Control Heidenhain TL Micro 300, - Work Mode 4 - DXF converter (HEIDENHAIN software option) - Suction preparation machine: ca 33600h, milling spindle: ca 12100h
            x-travel 2200 mm
            y-travel 3500 mm
            z-travel 1200 mm
            control Heidenhain iTNC 530 HSCI
            turning speed range - main spind. 24000 min/-1
            power capacity - main spindel 42 / 48 kW
            tool taper HSK 63 A
            max. Torque 67 / 76 Nm
            swivellable A: +/- 110 °
            rotatable C: +/- 275 °
            table surface area 2100 x 3500 mm
            max. workpiece weight 5.000 kg
            number of toolpositions 68 pos.
            tool taper HSK 63 A
            rapid traverse ( X / Y / Z ) 65 m/min
            rapid traverse A: 8 1/min
            Description :
            5 simultanous axis CNC portal milling machine equipped with:
            - CNC control Heidenhain iTNC 530 HSCI & HR 520
            - Milling head FK 4
            - 42kW Fischer spindle
            - 68-fold tool changer (HSK-A 63)
            - KSS Coolant (IKZ 60bar / AKZ 10bar)
            - Chip conveyor
            - Workpiece Measuring M&H Inprocess Messtechnik, Typ 20.41 MULTI
            - Laser-Tool Control Heidenhain TL Micro 300,
            - Work Mode 4
            - DXF converter (HEIDENHAIN software option)
            - Suction preparation

            machine: ca 33600h, milling spindle: ca 12100h


          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Double colonne ZIMMERMANN FZ 42


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05718 · Planer-Type Milling M/C - Double Column

          ZIMMERMANN - FZ 42 - - 2012 - SIEMENS 840 D PL

          Technical details
          x-travel 12500 mm︱y-travel 5000 mm︱z-travel 3500 mm︱control SIEMENS 840 D PL ︱distance between columns 6130 mm︱Passage height 6380 mm︱A-axis +/- 110° deg︱c-axis 360° deg︱tool taper HSK 63 A DIN 69893︱spindle turning speed - stepless 10000 U/min︱max. torque on the spindle 95 Nm︱drive motor for milling spindle 60 kW︱feeds x/y/z -stepless 50 / 60 / 50 m/min︱total power requirement kW︱weight of the machine ca. 149 t︱dimensions of the machine ca. m︱
          * SIEMENS 840 D PL CNC control * Extraction * Milling head VH3: - A-axis swivel angle: Without extraction +/- 110 deg., with extraction + 110 / -35 deg., swivel speed 60 degrees/s - C-axis swivel angle: +/- 360 deg., swivel speed 60 degrees/s
            x-travel 12500 mm
            y-travel 5000 mm
            z-travel 3500 mm
            control SIEMENS 840 D PL
            distance between columns 6130 mm
            Passage height 6380 mm
            A-axis +/- 110° deg
            c-axis 360° deg
            tool taper HSK 63 A DIN 69893
            spindle turning speed - stepless 10000 U/min
            max. torque on the spindle 95 Nm
            drive motor for milling spindle 60 kW
            feeds x/y/z -stepless 50 / 60 / 50 m/min
            weight of the machine ca. 149 t
            Description :
            * SIEMENS 840 D PL CNC control
            * Extraction
            * Milling head VH3:
            - A-axis swivel angle: Without extraction +/- 110 deg., with extraction
            + 110 / -35 deg., swivel speed 60 degrees/s
            - C-axis swivel angle: +/- 360 deg., swivel speed 60 degrees/s

          Datasheet
          Request / Contact
          Fraiseuses de type raboteuse d'occasion M / C - Double colonne EIMA Gamma T linear


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05680 · Planer-Type Milling M/C - Double Column

          EIMA - Gamma T linear - - 2012 - Heidenhain iTNC 530

          Technical details
          x-travel 3500 mm︱y-travel 2500 mm︱z-travel 1250 mm︱Control Heidenhain iTNC 530 ︱table surface area 3500 x 2500 mm︱tool taper HSK 63 A ︱spindle turning speed range max. 18000 U/min︱spindle motor 24 kW︱max. torque on the spindle 38/50 (100/40%) Nm︱no. of tools in the magazine 30 Stück︱workpiece diameter at full load 100 mm︱wotkpiece diameter with 2 vacant positions 200 mm︱tool length - max. 200 mm︱weight of tools max. 5 kg︱total power requirement 88 kW︱weight of the machine ca. 35 t︱dimensions of the machine ca. m︱
          5-axis machining center Last spindle exchange: 05/2018 (new spindle from EIMA)! Operating hours (as of October 2019): - machine: 48000 h - Program run: 17500 h - spindle: 3200 h Machine is in technically perfect, very good condition. Maintenance and geometry measurements were carried out annually or as required. * Fork design milling head with C-axis (+/- 220 deg) and B-axis (+/- 120 deg) * Direct measuring systems in C- and B-axis * Clamping in C- and B-axis * Chip conveyor * Increased accuracy A / C-axis * 30-station tool-changer * CNC control Heidenhain iTNC 530 HSCI * Coolant unit + additional tank 1000 ltr - with band filter system * Probe for workpiece measurement * Coolant through spindle 40 bar * Blown air spindle * Defective replacement spindle (not ready for use)
            x-travel 3500 mm
            y-travel 2500 mm
            z-travel 1250 mm
            Control Heidenhain iTNC 530
            table surface area 3500 x 2500 mm
            tool taper HSK 63 A
            spindle turning speed range max. 18000 U/min
            spindle motor 24 kW
            max. torque on the spindle 38/50 (100/40%) Nm
            no. of tools in the magazine 30 Stück
            workpiece diameter at full load 100 mm
            wotkpiece diameter with 2 vacant. 200 mm
            tool length - max. 200 mm
            weight of tools max. 5 kg
            total power requirement 88 kW
            weight of the machine ca. 35 t
            Description :
            5-axis machining center

            Last spindle exchange: 05/2018 (new spindle from EIMA)!

            Operating hours (as of October 2019):
            - machine: 48000 h
            - Program run: 17500 h
            - spindle: 3200 h

            Machine is in technically perfect, very good condition.
            Maintenance and geometry measurements were carried out annually or as required.

            * Fork design milling head with C-axis (+/- 220 deg) and B-axis (+/- 120 deg)
            * Direct measuring systems in C- and B-axis
            * Clamping in C- and B-axis
            * Chip conveyor
            * Increased accuracy A / C-axis
            * 30-station tool-changer
            * CNC control Heidenhain iTNC 530 HSCI
            * Coolant unit + additional tank 1000 ltr - with band filter system
            * Probe for workpiece measurement
            * Coolant through spindle 40 bar
            * Blown air spindle
            * Defective replacement spindle (not ready for use)
          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Colonne double FOOKE Endura 705 Linear


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8465 · Planer-Type Milling M/C - Double Column

          FOOKE - Endura 705 Linear - - 2010 - Fidia C20

          Technical details
          x-travel 2.200 mm︱y-travel 2.800 mm︱z-travel 1.200 mm︱control Fidia C20 ︱Main spindle: ︱turning speed range - main spindle max. 20.000 min/-1︱power capacity - main spindel 25 kW︱tool taper HSK 63 A DIN 69893︱max. Torque 119 Nm︱swivellable A: +/- 100 °︱rotatable C: +/- 275 °︱work table: ︱table surface area 2.800 x 2.200 mm︱number of T-slots 14 ︱max. table load 5.000 kg/m²︱max. table load 20 t︱Tool-Presetter: ︱number of toolpositions 50 pos.︱tool taper HSK 63 A DIN 69893︱max. tool diameter 70 / (140) mm︱
          5 Axis-CNC-Column Travelling Milling Machine FOOKE - Endura 705 Linear - from Alu- and Plastic-Production
            x-travel 2.200 mm
            y-travel 2.800 mm
            z-travel 1.200 mm
            control Fidia C20
            turning speed range - main spind. max. 20.000 min/-1
            power capacity - main spindel 25 kW
            tool taper HSK 63 A DIN 69893
            max. Torque 119 Nm
            swivellable A: +/- 100 °
            rotatable C: +/- 275 °
            table surface area 2.800 x 2.200 mm
            number of T-slots 14
            max. table load 5.000 kg/m²
            max. table load 20 t
            number of toolpositions 50 pos.
            tool taper HSK 63 A DIN 69893
            max. tool diameter 70 / (140) mm
            Description :
            5 Axis-CNC-Column Travelling Milling Machine
            FOOKE - Endura 705 Linear

            - from Alu- and Plastic-Production

          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Colonne double KAO MING 332M Multi face


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1110043 · Planer-Type Milling M/C - Double Column

          KAO MING - 332M Multi face - - 2009 - FANUC 18iTB

          Technical details
          x-travel 3.230 mm︱y-travel 3.850 mm︱z-travel 1.100 mm︱Control FANUC 18iTB ︱total power requirement 22/26 kW︱weight of the machine ca. 44 t︱dimensions of the machine ca. 8.1x7.5x5 m︱
          Make KAO MING Typ332M multi face Year of construction 2009 Control type CNC FANUC 18i-MB Table size (mm) 3000 x 2600 mm X out (mm) 3230 Y-off (mm) 3850 Z-off (mm) 1100 / max. distance between table and spindle 1425 mm Table burden 12,000 kg Speed (RPM) maximum 8000 tool holder ISO 50 Feed along (mm/Rev) 5 mtr/min. Feed (mm/Rev) across 5 mtr/min Vorschüb vertical (mm/Rev) 5 mtr/min. Rapid traverse 10 mtr/min Gesamtleistung(kW) spindle 22/26 kW Length (mm) 8130 Width (mm) 7493 Height (mm) 5080 Weight 44,000 kg Additional information WzW for 30 tools
            x-travel 3.230 mm
            y-travel 3.850 mm
            z-travel 1.100 mm
            Control FANUC 18iTB
            total power requirement 22/26 kW
            weight of the machine ca. 44 t
            dimensions of the machine ca. 8.1x7.5x5 m
            Description :
            Make KAO MING
            Typ332M multi face
            Year of construction 2009
            Control type CNC FANUC 18i-MB
            Table size (mm) 3000 x 2600 mm
            X out (mm) 3230
            Y-off (mm) 3850
            Z-off (mm) 1100 / max. distance between table and spindle 1425 mm
            Table burden 12,000 kg
            Speed (RPM) maximum 8000 tool holder ISO 50
            Feed along (mm/Rev) 5 mtr/min.
            Feed (mm/Rev) across 5 mtr/min
            Vorschüb vertical (mm/Rev) 5 mtr/min.
            Rapid traverse 10 mtr/min
            Gesamtleistung(kW) spindle 22/26 kW
            Length (mm) 8130
            Width (mm) 7493
            Height (mm) 5080
            Weight 44,000 kg


            Additional information
            WzW for 30 tools
          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Double colonne AMCO-SACEM FPF-4500


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H06280 · Planer-Type Milling M/C - Double Column

          AMCO-SACEM - FPF-4500 - - 2008 - Heidenhain iTNC 530

          Technical details
          x-travel 10000 mm︱y-travel 5900 mm︱z-travel 1200 (Ram) mm︱control Heidenhain iTNC 530 ︱distance between columns 4500 mm︱Distance spindle/table max. 4000 mm︱table-size 10000 x 3200 mm︱workpiece weight max. 50000 kg︱tool taper ISO 50 ︱cross rail - adjustment (W) 3000 mm︱milling head -swivable +/- 45 °︱feeds (X/Y/Z) 3 - 5000 mm/min︱rapid traverse (X/Y/Z) 10000 mm/min︱feeds cross rail (W) 3 - 2000 mm/min︱rapid traverse of the crossrail (W) 2000 mm/min︱spindle turning speed range 20 - 5000 U/min︱main drive 40 kW Siemens︱transmission ratio 2 ︱ram head dimension 525 x 560 mm︱max. torque on the spindle 1592 Nm︱
          Machine is of the year 2008 and cost 3.500.000 € when it was new. Machine has less than 1.000 working hours. Equipped with head changer (2 milling heads heads 1 deg. x 1 deg., orbital,esferic and an a enlargement). These millings heads cost 900.000 € when they were new. Equipped with: • automatic tool-clamping system "SACEM-Hydroblock" • 2 off swarf conveyors • automatic head-changer (4-station) • universal-head with 2,5 deg. indexing in 2 axis (37 kW, max. 2500 rpm) • 2-axis NC head for spherical milling (37 kW, max. 2500 rpm) • extension 500 mm (max. 4000 rpm) • 5-axis CNC-control Heidenhain iTNC 530 * LIQUID COOLING SYSTEM: 1,000 l tank. pump 60 l / min. and 5 bar with pressure regulating valve. Coolant through spindle Packing list with dimension and weigths enclosed. Machine becomes available due bankruptcy. It is in great condition, very little used ! Machine is already dismantled and stored in a warehouse.
            x-travel 10000 mm
            y-travel 5900 mm
            z-travel 1200 (Ram) mm
            control Heidenhain iTNC 530
            distance between columns 4500 mm
            Distance spindle/table max. 4000 mm
            table-size 10000 x 3200 mm
            workpiece weight max. 50000 kg
            tool taper ISO 50
            cross rail - adjustment (W) 3000 mm
            milling head -swivable +/- 45 °
            feeds (X/Y/Z) 3 - 5000 mm/min
            rapid traverse (X/Y/Z) 10000 mm/min
            feeds cross rail (W) 3 - 2000 mm/min
            rapid traverse of the crossrail (W) 2000 mm/min
            spindle turning speed range 20 - 5000 U/min
            main drive 40 kW Siemens
            transmission ratio 2
            ram head dimension 525 x 560 mm
            max. torque on the spindle 1592 Nm
            Description :
            Machine is of the year 2008 and cost 3.500.000 € when it was new.
            Machine has less than 1.000 working hours.
            Equipped with head changer (2 milling heads heads 1 deg. x 1 deg.,
            orbital,esferic and an a enlargement). These millings heads cost 900.000 € when
            they were new.

            Equipped with:
            • automatic tool-clamping system "SACEM-Hydroblock"
            • 2 off swarf conveyors
            • automatic head-changer (4-station)
            • universal-head with 2,5 deg. indexing in 2 axis (37 kW, max. 2500 rpm)
            • 2-axis NC head for spherical milling (37 kW, max. 2500 rpm)
            • extension 500 mm (max. 4000 rpm)
            • 5-axis CNC-control Heidenhain iTNC 530

            * LIQUID COOLING SYSTEM:
            1,000 l tank. pump 60 l / min. and 5 bar with pressure regulating valve.
            Coolant through spindle

            Packing list with dimension and weigths enclosed.

            Machine becomes available due bankruptcy. It is in great condition, very little
            used !

            Machine is already dismantled and stored in a warehouse.
          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Double colonne CORREA FP 40


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1571 · Planer-Type Milling M/C - Double Column

          CORREA - FP 40 - - 2007 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 4.000 mm︱y-travel 3.000 mm︱z-travel 1.000 mm︱Control HEIDENHAIN iTNC 530 ︱max./ min. distance spindle nose / table 1.500/500 mm︱clamping table 4.500 x 2.000 mm︱T-slots 22 H8 mm︱distance between columns 2.500 mm︱feed rate X-axis 2-15.000 mm/min︱workpiece weight max. 10.000 kg︱feed rate Y- and Z-axis, stepless 2-12.000 mm/min︱torque of the drives 37 NM︱ball screws: - ︱longitudinal (X)-axis/pitch 63/12 mm︱Vertical (Z)-axis, diameter/pitch 63/10 ︱working spindle with automatic milling head UAD: - ︱capacity at 100% load 30 kW︱transmission ratio 2 ︱turning speed range - stepless 40-5.000 U/min︱max. torque 1.045 Nm︱
            x-travel 4.000 mm
            y-travel 3.000 mm
            z-travel 1.000 mm
            Control HEIDENHAIN iTNC 530
            max./ min. distance spindle nose. 1.500/500 mm
            clamping table 4.500 x 2.000 mm
            T-slots 22 H8 mm
            distance between columns 2.500 mm
            feed rate X-axis 2-15.000 mm/min
            workpiece weight max. 10.000 kg
            feed rate Y- and Z-axis, steples. 2-12.000 mm/min
            torque of the drives 37 NM
            ball screws: -
            longitudinal (X)-axis/pitch 63/12 mm
            Vertical (Z)-axis, diameter/pitc. 63/10
            working spindle with automatic m. -
            capacity at 100% load 30 kW
            transmission ratio 2
            turning speed range - stepless 40-5.000 U/min
            max. torque 1.045 Nm
          Datasheet
          Request / Contact
          Fraiseuses d'occasion Fraisage de type raboteuse M / C - Double colonne ANAYAK P-3200


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-100126 · Planer-Type Milling M/C - Double Column

          ANAYAK - P-3200 - - 2004 - HEIDENHAIN TNC-530

          Technical details
          x-travel 3.200 mm︱y-travel 1.800 mm︱z-travel 900 mm︱control HEIDENHAIN TNC-530 ︱table-size 3.000 x 1.700 mm︱Distance between spindle 2.020 mm︱rapid traverse X-axis 15.000 mm/min︱rapid traverse Z-axis 12.000 mm/min︱working feed 5.000 mm/min︱taper ISO-50 ︱turning speeds 6.000 U/min︱Motor power 35 kw︱tools in tool magazin 20 ︱handwheel HEIDENHAIN HR-520 ︱table weight 8.000 Kg︱total power requirement 54 kW︱weight of the machine ca. 25.000 t︱dimensions of the machine ca. 7.800 x 4.750 x 4.400 m︱
          -Automatic Tool Changer INCLUDED -Double Chip Conveyor +Cross INCLUDED
            x-travel 3.200 mm
            y-travel 1.800 mm
            z-travel 900 mm
            control HEIDENHAIN TNC-530
            table-size 3.000 x 1.700 mm
            Distance between spindle 2.020 mm
            rapid traverse X-axis 15.000 mm/min
            rapid traverse Z-axis 12.000 mm/min
            working feed 5.000 mm/min
            taper ISO-50
            turning speeds 6.000 U/min
            Motor power 35 kw
            tools in tool magazin 20
            handwheel HEIDENHAIN HR-520
            table weight 8.000 Kg
            total power requirement 54 kW
            weight of the machine ca. 25.000 t
            dimensions of the machine ca. 7.800 x 4.750 x 4.400 m
            Description :
            -Automatic Tool Changer INCLUDED
            -Double Chip Conveyor +Cross INCLUDED

          Datasheet
          Request / Contact
          Fraiseuses d'occasion Fraisage de type raboteuse M / C - Double colonne EDEL CYPORT 3020


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0262 · Planer-Type Milling M/C - Double Column

          EDEL - CYPORT 3020 - - 2004 - Heidenhain iTNC 530

          Technical details
          x-travel 3.000 mm︱y-travel 2.000 mm︱z-travel 960 mm︱Control Heidenhain iTNC 530 ︱b-axis +/- 360 °︱spindle taper HSK 63 ︱tool magazin: 60-fach/positions ︱table surface area 5.000 x 2.300 mm︱table load 23 t︱total power requirement 55 kVA︱weight of the machine ca. t︱dimensions of the machine ca. m︱Internal coolant ︱chip conveyor ︱Electronic handwheel ︱Part enclosure ︱Lubricant unit
          The EDEL machine CYPORT is a 5-axis machining center with integrated Direct- Drive fork head in gantry - portal design. This large machining center impresses with its unbeatable relationship between the installation area and the work area and is installed within a very short time due to its crane hook concept. For positioning in the X direction, the gantry portal, with synchronously driven ball screws on both sides, moves on the machine table. The main spindle moves in the Y and Z directions within the gantry portal. Operating hours (04/08/2020): - Machine hours: 83.805 h - Program run: 40.892 h - Spindle hours: 32.073 h (refers to 2 existing spindles, 1 spindle inserted in the machine, the other must be overhauled) TECHNICAL SPECIFICATIONS: The following technical data refer to a - steel material - with a strength of =/< 700 N/mm2 Workspace: - Travel range X-axis: 3.000 mm - Travel range Y-axis: 2.000 mm - Travel range Z-axis: 960 mm - Rapid traverse X/Y/Z: 20/20/15 m/min - Milling performance: - 600 cm³ - Feed forces each axis: 10.000 N - Drilling - HSS twist drill: Ø 32 mm - Threads: M 24 Portal passage: - Width Y: 2.280 mm - Height Z: 1.150 mm Control: HEIDENHAIN iTNC 530 Main spindle performance data: - Power S1: 21 kW - Torque S1: 100 Nm - Speed max.: 18.000 rpm - Characteristic speed: 2.000 rpm - Tool holder: HSK 63 Performance 2-axis fork head - type: CyMill M 21 - with C and A axes and an integrated main spindle is integrated in the gantry portal. - Power S1: 21 kW - Torque S1: 100 Nm - Speed max.: 18.000 rpm - Characteristic speed: 2.000 rpm - Tool holder: HSK-63 A-axis: - Swivel range: +/- 95° - Swing torque: 900 Nm - Holding torque clamped: 4.000 N C-axis: - Swivel range: +/- 200° - Swing torque: 900 Nm - Holding torque clamped: 4.000 N Tool changer: - Tool stations: 60 positions - Tool weight max.: 8 kg - Total tool weight in the magazine: 250 kg - Tool length max.: 300 mm - Tool diameter max.: 105 mm Installation data: - Space requirement: approx. 8.000 x 6.000 mm - Total weight: 23 tons - Total electrical load: ... kVA - Supply voltage: 400 V/50 Hz EQUIPMENT: - Internal cooling trough the spindle with additional air conditioning - Cooling lubricant unit, externally with fleece - Chip conveyor - Electronic handwheel - Documentation There is no guarantee for correctness and completeness of the technical details and accessories.
            x-travel 3.000 mm
            y-travel 2.000 mm
            z-travel 960 mm
            Control Heidenhain iTNC 530
            b-axis +/- 360 °
            spindle taper HSK 63
            tool magazin: 60-fach/positions
            table surface area 5.000 x 2.300 mm
            table load 23 t
            total power requirement 55 kVA
            Description :
            The EDEL machine CYPORT is a 5-axis machining center with integrated Direct-
            Drive fork head in gantry - portal design.

            This large machining center impresses with its unbeatable relationship between
            the installation area and the work area and is installed within a very short
            time due to its crane hook concept.

            For positioning in the X direction, the gantry portal, with synchronously
            driven ball screws on both sides, moves on the machine table.

            The main spindle moves in the Y and Z directions within the gantry portal.

            Operating hours (04/08/2020):
            - Machine hours: 83.805 h
            - Program run: 40.892 h
            - Spindle hours: 32.073 h (refers to 2 existing spindles, 1 spindle inserted in
            the machine, the other must be overhauled)


            TECHNICAL SPECIFICATIONS:

            The following technical data refer to a - steel material - with a strength of
            =/< 700 N/mm2

            Workspace:
            - Travel range X-axis: 3.000 mm
            - Travel range Y-axis: 2.000 mm
            - Travel range Z-axis: 960 mm
            - Rapid traverse X/Y/Z: 20/20/15 m/min
            - Milling performance: - 600 cm³
            - Feed forces each axis: 10.000 N
            - Drilling - HSS twist drill: Ø 32 mm
            - Threads: M 24

            Portal passage:
            - Width Y: 2.280 mm
            - Height Z: 1.150 mm

            Control: HEIDENHAIN iTNC 530

            Main spindle performance data:
            - Power S1: 21 kW
            - Torque S1: 100 Nm
            - Speed max.: 18.000 rpm
            - Characteristic speed: 2.000 rpm
            - Tool holder: HSK 63

            Performance 2-axis fork head - type: CyMill M 21 - with C and A axes and an
            integrated main spindle is integrated in the gantry portal.
            - Power S1: 21 kW
            - Torque S1: 100 Nm
            - Speed max.: 18.000 rpm
            - Characteristic speed: 2.000 rpm
            - Tool holder: HSK-63

            A-axis:
            - Swivel range: +/- 95°
            - Swing torque: 900 Nm
            - Holding torque clamped: 4.000 N

            C-axis:
            - Swivel range: +/- 200°
            - Swing torque: 900 Nm
            - Holding torque clamped: 4.000 N

            Tool changer:
            - Tool stations: 60 positions
            - Tool weight max.: 8 kg
            - Total tool weight in the magazine: 250 kg
            - Tool length max.: 300 mm
            - Tool diameter max.: 105 mm

            Installation data:
            - Space requirement: approx. 8.000 x 6.000 mm
            - Total weight: 23 tons
            - Total electrical load: ... kVA
            - Supply voltage: 400 V/50 Hz

            EQUIPMENT:
            - Internal cooling trough the spindle with additional air conditioning
            - Cooling lubricant unit, externally with fleece
            - Chip conveyor
            - Electronic handwheel
            - Documentation


            There is no guarantee for correctness and completeness of the technical details
            and accessories.
          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Double colonne CORREA rapid 5


          • Intermach BV
          • Lange Voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
            +31 (0)527 203038
          • info@intermach.nl
            www.intermach.nl
          #2050-1110051 · Planer-Type Milling M/C - Double Column

          CORREA - rapid 5 - - 2004 -

          Technical details
          x-travel 5000 mm︱y-travel 3100 mm︱z-travel 1200 mm︱Control ︱total power requirement 20/27 kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 15x6,2x6 m︱
          Stock number 1110051 Machine type CNC Portal milling machine Make CORREA Rapid type 50 Year of manufacture 2004 Control type HEIDENHAIN Table size (mm) 5000 x 2000 mm X out (mm) 5000 mm Y-off (mm) 3100 mm Z-off (mm) 1200 mm Table load Max 15 ton Speed (RPM) Max 18,000 Tool holder HSK 63 Gesamtleistung(kW) 20/27 Length (mm) 15000 Width (mm) 6200 Height (mm) 6000 Weight 65 ton Additional information Tool changer for 24 tools 5-axis gesteuerd
            x-travel 5000 mm
            y-travel 3100 mm
            z-travel 1200 mm
            total power requirement 20/27 kW
            weight of the machine ca. 65 t
            dimensions of the machine ca. 15x6,2x6 m
            Description :
            Stock number 1110051
            Machine type CNC Portal milling machine
            Make CORREA
            Rapid type 50
            Year of manufacture 2004
            Control type HEIDENHAIN
            Table size (mm) 5000 x 2000 mm
            X out (mm) 5000 mm
            Y-off (mm) 3100 mm
            Z-off (mm) 1200 mm
            Table load Max 15 ton
            Speed (RPM) Max 18,000
            Tool holder HSK 63
            Gesamtleistung(kW) 20/27
            Length (mm) 15000
            Width (mm) 6200
            Height (mm) 6000
            Weight 65 ton


            Additional information

            Tool changer for 24 tools
            5-axis gesteuerd
          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Colonne double FOREST-LINE Majormill


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17269 · Planer-Type Milling M/C - Double Column

          FOREST-LINE - Majormill - - 2004 - Siemens 840D

          Technical details
          x-travel 4800 mm︱y-travel 3800 mm︱z-travel 1250 mm︱c-axis every 2,5° ︱tool taper HSK A 100 ︱size of pallet 4000 x 2000 mm︱table load 15 t︱spindle drive motor 26 / 50 kW︱spindle turning speed range 10 - 4000 U/min︱Control Siemens 840D ︱distance between uprigths 3500 mm︱table travel 4800 mm︱feed 1 - 10 m/min︱total power requirement 160 kVA︱weight of the machine ca. 140 t︱dimensions of the machine ca. m︱
          equipped with: - CNC control Siemens Sinumerik 840 D - Milling head can be swiveled every 2.5 ° (C-axis) - High Torque milling head 50kW - Universal milling head 26kW - Tool magazine 182-fold with robot (HSK 100A) - Milling head magazine - Renishaw MP 16 - 2 chip conveyors - Coolant system with coolant through Spindle 7bar - Air Exhauster
            x-travel 4800 mm
            y-travel 3800 mm
            z-travel 1250 mm
            c-axis every 2,5°
            tool taper HSK A 100
            size of pallet 4000 x 2000 mm
            table load 15 t
            spindle drive motor 26 / 50 kW
            spindle turning speed range 10 - 4000 U/min
            Control Siemens 840D
            distance between uprigths 3500 mm
            table travel 4800 mm
            feed 1 - 10 m/min
            total power requirement 160 kVA
            weight of the machine ca. 140 t
            Description :
            equipped with:
            - CNC control Siemens Sinumerik 840 D
            - Milling head can be swiveled every 2.5 ° (C-axis)
            - High Torque milling head 50kW
            - Universal milling head 26kW
            - Tool magazine 182-fold with robot (HSK 100A)
            - Milling head magazine
            - Renishaw MP 16
            - 2 chip conveyors
            - Coolant system with coolant through Spindle 7bar
            - Air Exhauster
          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Colonne double ZAYER KPCU 6000 AR


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-100083 · Planer-Type Milling M/C - Double Column

          ZAYER - KPCU 6000 AR - - 2003 - Heidenhain iTNC 426 / 430

          Technical details
          x-travel 6.000 mm︱y-travel 4.000 mm︱z-travel 1.250 mm︱Control Heidenhain iTNC 426 / 430 ︱distance between columns 2.800 mm︱Tools changer 60 pos.︱spindle drive 40 kW︱number of spindle speeds 6.000 U/min/rpm︱distance between columns 2.800 mm︱
          Portal milling plant KPCU 6000 AR New 2003/retrofit 2020 full Axis / universal head / vertikal head / 6000 U/min 5 Axis CNC control Different exchangeable milling heads Tool internal cooling
            x-travel 6.000 mm
            y-travel 4.000 mm
            z-travel 1.250 mm
            Control Heidenhain iTNC 426 / 430
            distance between columns 2.800 mm
            Tools changer 60 pos.
            spindle drive 40 kW
            number of spindle speeds 6.000 U/min/rpm
            distance between columns 2.800 mm
            Description :
            Portal milling plant KPCU 6000 AR
            New 2003/retrofit 2020

            full Axis / universal head / vertikal head / 6000 U/min
            5 Axis CNC control
            Different exchangeable milling heads

            Tool internal cooling



          Datasheet
          Request / Contact
          Fraiseuses d'occasion Fraisage de type raboteuse M / C - Double colonne WESTPHAL Techline M 510


          • IMZ Maschinen Vertriebs GmbH
          • Marie - Curie - Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • (0049)/07171/98713-0
            (0049)/07171/98713-29
          • info@imz.de
            www.IMZ.de
          #1075-6925 · Planer-Type Milling M/C - Double Column

          WESTPHAL - Techline M 510 - - 2003 - NUM 1060 W

          Technical details
          x-travel 11200 mm︱y-travel 3130 mm︱z-travel 1000 mm︱Control NUM 1060 W ︱A-axis +- 120 °︱c-axis +215/-210 °︱spindle motor 15 kW︱spindle taper HSK-F63 ︱turning speeds 24000 U/min︱table width 1500 mm︱table length 9400 oder 2x3000 mm︱total power requirement kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 14,6x5,0x4,225 m︱
          Use: e.g. for processing aluminum panels, drilling profiles, advertising (signs milling, etc.), mold construction (prototypes) and processing of light steel frames / -beams using HSC milling The vertically arranged high-frequency milling spindle for automatic Tool change is mounted in a fork head on the Z-axis plate. The Spindle can be moved with the fork head in 2 NC axes, in the A axis and the C-axis. The vertical movement is carried out via the Z-axis. Liquid cooling via a cooling unit. Tool magazine: moving plate changer in the potal, outside the Work area Minimum quantity cooling and lubrication system MQL The machine table consists of milled aluminum plates 8 bar compressed air, clean, dry, oil-free, including pressure intensifier 10- 12 bar to express the tool Feed rates in rapid traverse / working step: X-axis: 60 m / min Y-axis: 60 m / min Z-axis: 30 m / min C-axis: 90 ° sec A-axis: 90 ° sec Total weight approx.20,000 kg Base frame approx.12,500 kg Portal with Z-axis approx. 6,500 kg machine hours: 46.312 h
            x-travel 11200 mm
            y-travel 3130 mm
            z-travel 1000 mm
            Control NUM 1060 W
            A-axis +- 120 °
            c-axis +215/-210 °
            spindle motor 15 kW
            spindle taper HSK-F63
            turning speeds 24000 U/min
            table width 1500 mm
            table length 9400 oder 2x3000 mm
            weight of the machine ca. 20 t
            dimensions of the machine ca. 14,6x5,0x4,225 m
            Description :
            Use:
            e.g. for processing aluminum panels, drilling profiles, advertising (signs
            milling, etc.), mold construction (prototypes) and processing of light steel
            frames /
            -beams using HSC milling

            The vertically arranged high-frequency milling spindle for automatic
            Tool change is mounted in a fork head on the Z-axis plate. The
            Spindle can be moved with the fork head in 2 NC axes, in the A axis
            and the C-axis. The vertical movement is carried out via the Z-axis.
            Liquid cooling via a cooling unit.

            Tool magazine: moving plate changer in the potal, outside the
            Work area
            Minimum quantity cooling and lubrication system MQL
            The machine table consists of milled aluminum plates
            8 bar compressed air, clean, dry, oil-free, including pressure intensifier 10-
            12 bar
            to express the tool

            Feed rates in rapid traverse / working step:
            X-axis: 60 m / min
            Y-axis: 60 m / min
            Z-axis: 30 m / min
            C-axis: 90 ° sec
            A-axis: 90 ° sec

            Total weight approx.20,000 kg
            Base frame approx.12,500 kg
            Portal with Z-axis approx. 6,500 kg

            machine hours: 46.312 h
          Datasheet
          Request / Contact
          Fraiseuses de type raboteuse M / C - double colonne MECOF Airone d'occasion


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17863 · Planer-Type Milling M/C - Double Column

          MECOF - Airone - - 2003 - Heidenhain iTNC 530

          Technical details
          x-travel 2300 mm︱y-travel 1650 mm︱z-travel 800 mm︱table-size 2400 x 1750 mm︱table load ca 15 t︱spindle motor 26 /30 kW︱spindle turning speed range 18000 / 30000 U/min︱tool taper HSK 63-E ︱control Heidenhain iTNC 530 ︱ram head dimension 400 x 400 mm︱feed range 0 - 60000 mm/min︱rapid traverse 0 - 100 m/min︱total power requirement kVA︱weight of the machine ca. 33 t︱dimensions of the machine ca. m︱
          Portal Milling Machine (5-Axis) equipped with: - CNC ControlHeidenhain iTNC 530 & HR 410 - 2 automatic Heads -- 1. 30 KW - 18.000 U/min -- 2. 26 KW - 30.000 U/min - Coolant - High Speed Cutting
            x-travel 2300 mm
            y-travel 1650 mm
            z-travel 800 mm
            table-size 2400 x 1750 mm
            table load ca 15 t
            spindle motor 26 /30 kW
            spindle turning speed range 18000 / 30000 U/min
            tool taper HSK 63-E
            control Heidenhain iTNC 530
            ram head dimension 400 x 400 mm
            feed range 0 - 60000 mm/min
            rapid traverse 0 - 100 m/min
            weight of the machine ca. 33 t
            Description :
            Portal Milling Machine (5-Axis) equipped with:
            - CNC ControlHeidenhain iTNC 530 & HR 410
            - 2 automatic Heads
            -- 1. 30 KW - 18.000 U/min
            -- 2. 26 KW - 30.000 U/min
            - Coolant
            - High Speed Cutting
          Datasheet
          Request / Contact
          Fraiseuses Fraiseuse de type raboteuse M / C - Colonne double IMES-ICORE GPY


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-40210 · Planer-Type Milling M/C - Double Column

          IMES-ICORE - GPY - - 2002 - HEIDENHAIN ITNC 530

          Technical details
          BASIC DESIGN ︱- basic design: plano type ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 3 ︱- .. among of them simultaneous CNC axes 3 ︱- X-axis travel 1150 mm︱- Y-axis travel 1250 mm︱TABLE ︱- table surface (left-right) 1250 mm︱- table surface (front-back) 1900 mm︱MILLING SPINDLE / HEAD ︱- spindle revolutions (max) 6000 /min︱- drive power 7 kW︱
          Portal milling machine for polystyrene and foam processing.
            - basic design: plano type
            - number of processing axes (exc. 3
            - .. among of them simultaneous . 3
            - X-axis travel 1150 mm
            - Y-axis travel 1250 mm
            - table surface (left-right) 1250 mm
            - table surface (front-back) 1900 mm
            - spindle revolutions (max) 6000 /min
            - drive power 7 kW
            Description :
            Portal milling machine for polystyrene and foam processing.
          Datasheet
          Request / Contact


          Find a double column planer-type milling M/C here
          Discover why milling is a popular metalworking technique

          There are a wide variety of milling machines available to industry professionals today. One option is the planing process whereby the milling surface and the workpiece are moved in opposite directions to one another. This is in contrast to the process of shaping where the workpiece remains stationary. A double column planer-type milling M/C can be used to form a variety of materials from wood to heavy metals. Find the best in used machinery at LagerMaschinen your source for quality industrial machines.

          Planer-style milling machines offer many advantages

          Planing is a versatile approach to the machining of solids. Both flat surfaces and notched and grooved surfaces can be produced by a double column planer-type milling M/C. Planing is used mostly for the creating of linear surfaces as opposed to rounded ones. If you're in the market for a double column planer-type milling M/C why not check out the used models available at LagerMaschinen. You can save yourself time and money by shopping here for used machinery.

          LagerMaschinen: making the most of your time and money

          Investing in used machinery is a smart plan for your business. Moreover shopping for used equipment online not only makes the most of your budget but of your valuable time as well. For example you're looking for a double column planer-type milling M/C you can use LagerMaschinen's user-friendly site to browse by model price or location and find the best used machine for your business' needs. For the best selection in metalworking equipment and other industrial machinery check out LagerMaschinen.