Metal Processing - lathe-conventional-electronic

turning diameter 500 mm︱turning length 1000 mm︱swing diameter over bed slide 440 mm︱centre height 220 mm︱bed width 270 mm︱turning diameter over slide 200 mm︱spindle bore 52 mm︱turning speeds 25 - 2000 U/min︱feed 0,057 - 2,645 mm/U︱tailstock quill taper MT 4 ︱total power requirement 6,3 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2,2 x 1,2 x 1,7 m︱

---

turning diameter over bed 350 mm︱turning diameter over slide rest 200 mm︱turning length 1000 mm︱bed width 135 mm︱spindle bore 40 mm︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2,0 x 0,8 x 1,5 m︱

---

turning diameter over bed 1050 mm︱turning diameter over slide rest -- mm︱turning length 2000 mm︱length of gap 300/80 mm︱center height over bed 625 mm︱spindle speed: 2,8 - 560 1/min︱spindle bore 122 mm︱feeds - longitudinal 0,08 - 56 mm/U︱tailstock quill diameter 150 mm︱total power requirement 22 kW︱weight of the machine ca. 8,0 t︱dimensions of the machine ca. 4,9 x 2,0 x 1,5 m︱

---

turning diameter over bed 300 mm︱turning diameter over slide rest 150 mm︱turning length 800 mm︱spindle bore mm︱turning speed range 42 - 2000 U/min︱feeds 0,011 - 0,91 mm/U︱tailstock quill taper MT 3 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,7 x 0,8 x 2,0 m︱

---

turning diameter 575 mm︱turning length 1000 mm︱swing diameter over bed slide 300 mm︱bed width 400 mm︱spindle bore 51 mm︱total power requirement 8 kW︱weight of the machine ca. 2,0 t︱dimensions of the machine ca. 2,9 x 1,18 x 1,35 m︱

---

---

---

turning length 800 mm︱turning diameter 330 mm︱centre height 165 mm︱turning diameter over slide rest 170 mm︱spindle bore 38,0 mm︱tailstock quill taper MT 3 MK︱turning speeds 24 - 2800 U/min︱voltage 380 V︱bed width 245 mm︱tail stock Hub ca. 110 mm︱total power requirement 3,0 kW︱weight of the machine ca. 850 kg︱

---

turning diameter - ︱turning length - ︱swing diameter over bed slide - ︱

---

turning diameter - mm︱turning length - mm︱swing diameter over bed slide - mm︱

---

turning diameter 400 mm︱turning length 750 mm︱swing diameter over bed slide 220 mm︱spindle taper ISO 702/III No.6; Bajonett ︱spindle hollow Ø 52 mm︱turning speed range 9-1600 U/min︱total power requirement 7,5 kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. 2210x1020x1350 mm︱

---

turning diameter - mm︱turning length - mm︱swing diameter over bed slide - mm︱

---

turning diameter - mm︱turning length - mm︱swing diameter over bed slide - mm︱

---

Distance between centers 1500 mm︱Centre height 280 mm︱Swing over bed 560 mm ø︱Swing over support 360 mm ø︱Swing in the gap 800 mm ø︱Spindle boring 105 mm ø︱Steady rest 200 mm ø︱3-Jaw chuck 270 mm ø︱4-Jaw chuck 350 mm ø︱Digital read-out Newall ︱Clampingjaw 450 mm ø︱

---

Including: Variably adjustable speed Quick change holder with 3 holders Digital readout Foot brake

turning diameter 400 mm︱turning length 1150 mm︱swing diameter over bed slide 210 mm︱bed width 300 mm︱turning speeds 12 / 40 - 2200 U/min︱spindle bore 52 mm︱total power requirement 4,6 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 1,65 x 1,0 m︱

---

PREMIUM master and spindle lathe with digital position display Newall DP700 - Machine bed and substructure made of heavily ribbed special cast - High rigidity of the headstock housing through heavily ribbed 25 GG cast - Hardened and ground face spindle ensures enormous accuracy and durability - Due to the high chip removal during roughing, the finest surfaces can be achieved and the tightest tolerances are observed - Large range of threads and feeds without changing the Gears in the change gear cutter must be made - Bed guides hardened and precision ground - Perfectly running main spindle mounted in precision ball bearings - Mechanical longitudinal feed switch-off of the bed slide with four adjustable eccentrics - Electronic brake on the main spindle - All control elements (electrical) can be reached centrally - 4-way longitudinal stop - 2 measuring bars Microsyn - 1 Spherosyn measuring strip - User interface is intuitive and user-friendly - Designed and manufactured in England - IP67 protection - Measuring strips insensitive to contamination in the workshop Scope of delivery: Coolant device Machine lamp Automatic shutdown Quick change tool holder SWH 5-B Including digital position indicator DP700 from Newall

turning diameter 400 mm︱turning length 1150 mm︱swing diameter over bed slide 210 mm︱bed width 300 mm︱turning speeds 12 / 40 - 2200 U/min︱spindle bore 52 mm︱total power requirement 4,6 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 1,65 x 1,0 m︱

---

turning diameter 1050 mm︱turning length 6000 mm︱swing diameter over bed slide 750 mm︱spindle diameter 95 mm︱turning speeds 5-500 (16x) U/min︱faceplate with 4 clamps dia. 1000 mm︱total power requirement 27/41 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

turning diameter over bed 440 mm︱turning diameter over slide rest 230 mm︱turning length 1000 mm︱bed width 360 mm︱turning dia. in gap 640 mm︱spindle bore 72 mm︱feeds - longitudinal 0,04 - 12 mm/U︱feeds - cross 0,02 - 6 mm/min︱turning speeds 20 - 2000 U/min︱diameter of quill 75 mm︱tailstock quill taper MT 5 ︱total power requirement 7,5 kW︱weight of the machine ca. 2,9 t︱dimensions of the machine ca. 3,1 x 1,3 x 1,4 m︱

---

Distance between centers 3000 mm︱Centre height 400 mm︱Swing over bed 800 mm ø︱Swing over support 580 mm ø︱Swing in the gap 1040 mm ø︱Spindle boring 105 mm ø︱3-Jaw chuck 350 mm ø︱Motor 7,5 kW︱

---

Quick change holder Digital readout

turning diameter 490 mm︱turning length 1000 mm︱swing diameter over bed slide 490 mm︱swing diameter over slide rest 280 mm︱spindle bore 63 mm︱chucking diameter max. 315 mm︱diameter of quill 560 mm︱ 15 kVA︱total power requirement 12 kW︱weight of the machine ca. 2,24 t︱dimensions of the machine ca. 2,75 x 1,45 x 1,7 m︱

---

turning diameter 370 mm︱turning length 750 mm︱swing diameter over bed slide 350 mm︱control Siemens ︱total power requirement 9 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2 x 2 x 3 m︱

---

Distance between centers 4000 mm︱Centre height 400 mm︱Swing over bed 800 mm ø︱Swing over support 510 mm ø︱Swing in the gap 1100 mm ø︱Spindle boring 250 mm ø︱Steady rest 350 mm ø︱3-Jaw chuck 630 mm ø︱Machine dimensions (lxwxh) 6500 x 2200 x 2000 mm︱Machine weight 7300 kg︱

---

Distance between centers 750 mm︱Centre height 155 mm︱Swing over bed 310 mm ø︱Swing over support 90 mm ø︱Spindle boring 35 mm ø︱3-Jaw chuck 160 mm ø︱Digital read-out Newall DP 8 ︱

---

Including: 1 Chisel holder Drill head Fixed steady Travelling steady Water cooling Variably adjustable speed with frequency inverter 3-jaw chuck with inner and outer jaws

turning diameter 710/760 mm︱turning length 2000 mm︱swing diameter over bed slide 500 mm︱Control DMG ︱total power requirement 26 kW︱weight of the machine ca. 5,6 t︱dimensions of the machine ca. 3 x 4 x 4 m︱

---