Réseau européen de revendeurs de machines de stockage

Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Lathe - cycle-controlled

          Machinelist: Tour à cycle contrôlé


          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled MMT-germany LC / LD / BNC / BN


          • Meister Maschinen
          • Overhagener Weg 44
          • 59597 Erwitte
          • Deutschland

          • +49 (0) 2943-870946
            +49 (0) 2943-870885
          • info@meister-maschinen.com
            www.meister-maschinen.com
          #2005-10088 · Lathe - cycle-controlled

          MMT-germany - LC / LD / BNC / BN - - 2020 - Fanuc/ Fagor/ Siemens

          Technical details
          turning diameter 750-3550 mm mm︱turning length 1000-12000 mm︱control Siemens / Fanuc 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
            turning diameter 750-3550 mm mm
            turning length 1000-12000 mm
            control Siemens / Fanuc 0
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled Style  Style510x1350


          • Meister Maschinen
          • Overhagener Weg 44
          • 59597 Erwitte
          • Deutschland

          • +49 (0) 2943-870946
            +49 (0) 2943-870885
          • info@meister-maschinen.com
            www.meister-maschinen.com
          #2005-102014 · Lathe - cycle-controlled

          Style - Style510x1350 - - 2019 - Style

          Technical details
          turning diameter 510 mm︱turning length 1350 mm︱control Style 0︱total power requirement kW︱weight of the machine ca. 2750 t︱required space m︱
            turning diameter 510 mm
            turning length 1350 mm
            control Style 0
            weight of the machine ca. 2750 t
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled PINACHO ST 225x1000


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09171 · Lathe - cycle-controlled

          PINACHO - ST 225x1000 - - 2018 - FAGOR 8055i

          Technical details
          turning diameter 450 mm︱turning length 1000 mm︱control FAGOR 8055i ︱centre height 225 mm︱bed width 300 mm︱spindle head DIN 55026/ Gr.6 ︱turning diameter over bed slide 370 ︱turning dia. over face-slide 260 mm︱spindle bore 65 mm︱spindle turning speed - stepless 1 - 3000 U/min︱tail stock ︱pinole diameter 68 mm︱quill stroke 200 mm︱taper in tailstock-quill MK 4 ︱total power requirement 10 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 2,6 x 1,2 x 1,9 m︱
          Model ST 225x1000 Manufactured according to DIN 8605 Spindle mount A2 DIN 55026 Feed rates Z, X: 0-7500 mm Standard version: Automatic 8-station tool turret VDI30 machine light, complete machine cover with chip tray instruction book, coolant device, servo spindle motor, automatic lubrication of the guides, Electronic handwheels for X and Z axes, CE compliant Accessories: hydraulic chuck Ø 250 pull cylinder with bore Ø 68 Hydraulic rice stick quill VDI 30 tool disc prepared for part catcher Chip conveyor
            turning diameter 450 mm
            turning length 1000 mm
            control FAGOR 8055i
            centre height 225 mm
            bed width 300 mm
            spindle head DIN 55026/ Gr.6
            turning diameter over bed slide 370
            turning dia. over face-slide 260 mm
            spindle bore 65 mm
            spindle turning speed - stepless 1 - 3000 U/min
            pinole diameter 68 mm
            quill stroke 200 mm
            taper in tailstock-quill MK 4
            total power requirement 10 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 2,6 x 1,2 x 1,9 m
            Description :
            Model ST 225x1000
            Manufactured according to DIN 8605
            Spindle mount A2 DIN 55026
            Feed rates Z, X: 0-7500 mm

            Standard version:
            Automatic 8-station tool turret VDI30
            machine light, complete machine cover with chip tray
            instruction book, coolant device,
            servo spindle motor, automatic lubrication of the guides,
            Electronic handwheels for X and Z axes, CE compliant
            Accessories:
            hydraulic chuck Ø 250 pull cylinder with bore Ø 68
            Hydraulic rice stick quill
            VDI 30 tool disc
            prepared for part catcher
            Chip conveyor
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled KERN-DMT CD 1100


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03077 · Lathe - cycle-controlled

          KERN-DMT - CD 1100 - - 2014 - Heidenhain MANUALplus 620

          Technical details
          turning diameter 1100 mm︱turning length 6000 mm︱control Heidenhain MANUALplus 620︱greates pass round over bed 1120 mm︱Swing diameter over cross slide 820 ︱slide travel facial 600 mm︱max. turning diameter over bed with Multifix/Parat 110 mm︱max. turning diameter over bed with revolver 1000 mm︱spindle diameter in front bearing 190 mm︱spindle bore 132 mm︱spindle taper 140 metr︱main spindle drive at 60% ED 46 kW︱Speed range - up to 1-1800 U/min︱feed range - face slide / stepless 0,001-1000 mm/U︱feed range - longitudinal slide /stepless 0,001-2000 mm/U︱thread pitch min. 0,01 mm︱thread pitch max. 999,9 mm︱rapid travel - longitudinal/face 10/5 m/min︱diameter of quill 125 mm︱quill travel 280 mm︱
          CNC-Lathe, cycle-controlled, with manual tool carrier - only 490 connected hours Equipment / Accessories: - ZF drive, 2 steps - automatic central lubrication - chip conveyor - 2 pcs. steady rests - various Multifix steel holders - documentation
            turning diameter 1100 mm
            turning length 6000 mm
            control Heidenhain MANUALplus 620
            greates pass round over bed 1120 mm
            Swing diameter over cross slide 820
            slide travel facial 600 mm
            max. turning diameter over bed w. 110 mm
            max. turning diameter over bed w. 1000 mm
            spindle diameter in front bearin. 190 mm
            spindle bore 132 mm
            spindle taper 140 metr
            main spindle drive at 60% ED 46 kW
            Speed range - up to 1-1800 U/min
            feed range - face slide / steple. 0,001-1000 mm/U
            feed range - longitudinal slide . 0,001-2000 mm/U
            thread pitch min. 0,01 mm
            thread pitch max. 999,9 mm
            rapid travel - longitudinal/face 10/5 m/min
            diameter of quill 125 mm
            quill travel 280 mm
            Description :
            CNC-Lathe, cycle-controlled, with manual tool carrier
            - only 490 connected hours

            Equipment / Accessories:
            - ZF drive, 2 steps
            - automatic central lubrication
            - chip conveyor
            - 2 pcs. steady rests
            - various Multifix steel holders
            - documentation
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled KERN-DMT CD 1100


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05856 · Lathe - cycle-controlled

          KERN-DMT - CD 1100 - - 2014 - Heidenhain MANUALplus

          Technical details
          turning diameter 1100 mm︱turning length 6000 mm︱control Heidenhain MANUALplus ︱total power requirement kW︱weight of the machine ca. 15,1 t︱dimensions of the machine ca. 10,58 x 2,77 x 2,31 m︱
          CNC-Lathe, cycle-controlled, with ONLY 490 working hours ! Equipment / Accessories: - ZF drive, 2 steps - automatic central lubrication - chip conveyor - 2 pcs. steady rests - various Multifix steel holders - documentation turning diameter 1100 mm turning length 6000 mm control Heidenhain MANUALplus 620 Max. swing diameter over bed 1120 mm Swing diameter over cross slide 820 mm slide travel facial 600 mm spindle bore 132 mm spindle taper 140 metr main spindle drive (at 60% ED) 46 kW Speed range 1-1800 rpm feed range - face slide / stepless 0,001-1000 mm/r feed range - longitudinal slide /stepless 0,001-2000 mm/r thread pitch min. 0,01 mm thread pitch max. 999,9 mm rapid travel - longitudinal/face 10/5 m/min diameter of quill 125 mm quill travel 280 mm taper MK 6
            turning diameter 1100 mm
            turning length 6000 mm
            control Heidenhain MANUALplus
            weight of the machine ca. 15,1 t
            dimensions of the machine ca. 10,58 x 2,77 x 2,31 m
            Description :
            CNC-Lathe, cycle-controlled, with ONLY 490 working hours !

            Equipment / Accessories:
            - ZF drive, 2 steps
            - automatic central lubrication
            - chip conveyor
            - 2 pcs. steady rests
            - various Multifix steel holders
            - documentation

            turning diameter 1100 mm
            turning length 6000 mm
            control Heidenhain MANUALplus 620
            Max. swing diameter over bed 1120 mm
            Swing diameter over cross slide 820 mm
            slide travel facial 600 mm
            spindle bore 132 mm
            spindle taper 140 metr
            main spindle drive (at 60% ED) 46 kW
            Speed range 1-1800 rpm
            feed range - face slide / stepless 0,001-1000 mm/r
            feed range - longitudinal slide /stepless 0,001-2000 mm/r
            thread pitch min. 0,01 mm
            thread pitch max. 999,9 mm
            rapid travel - longitudinal/face 10/5 m/min
            diameter of quill 125 mm
            quill travel 280 mm
            taper MK 6

          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled CHALLENGER MICROTURN BNC 2680


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203403 · Lathe - cycle-controlled

          CHALLENGER MICROTURN - BNC 2680 - - 2012 - Fagor 8055 iT

          Technical details
          turning diameter 0680 mm︱turning length 2000 mm︱control Fagor 8055 iT ︱turning dia. over face-slide 410 mm︱turret head 8 Pos. ︱throat 870 x 280 mm︱bed width 405 mm︱max. workpiece weight between centers 2000 kg︱spindle turning speed range 80- 2400 U/min︱spindle bore 82 mm︱cross movement 345 mm︱longitudinal travel 2150 mm︱rapid traverse X-axis 15 m/min︱rapid traverse Z-axis 15 m/min︱total power requirement 15/22 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 4 x 2,4 x 2,4 m︱
          Accessories: 3 jaw chuck hand operated and 3 toolholder for turret VDI 40.
            turning diameter 0680 mm
            turning length 2000 mm
            control Fagor 8055 iT
            turning dia. over face-slide 410 mm
            turret head 8 Pos.
            throat 870 x 280 mm
            bed width 405 mm
            max. workpiece weight between ce. 2000 kg
            spindle turning speed range 80- 2400 U/min
            spindle bore 82 mm
            cross movement 345 mm
            longitudinal travel 2150 mm
            rapid traverse X-axis 15 m/min
            rapid traverse Z-axis 15 m/min
            total power requirement 15/22 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 4 x 2,4 x 2,4 m
            Description :
            Accessories: 3 jaw chuck hand operated and 3 toolholder for turret VDI 40.
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled FAT TUR 630


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03124 · Lathe - cycle-controlled

          FAT - TUR 630 - - 2012 - Siemens 810D MANUAL TURN

          Technical details
          turning diameter 370 mm︱turning length 3000 mm︱center height over bed 630 mm︱swing diameter over face slide 370 mm︱spindle bore 105 mm︱spindle speeds: 2 Stufen 2 - 2500 U/min︱tool taper REVOLVER VDI 40 ︱control Siemens 810D MANUAL TURN︱total power requirement 18,5 kW︱weight of the machine ca. 5 t︱
          Equipment: swarf protector automatic cooling device RS 232 interface 3-jaw chuck diameter 315mm automatic lubrication system Part-Documentation LUNNETTE +TURRET 12 POSISITION VDI 40
            turning diameter 370 mm
            turning length 3000 mm
            center height over bed 630 mm
            swing diameter over face slide 370 mm
            spindle bore 105 mm
            spindle speeds: 2 Stufen 2 - 2500 U/min
            tool taper REVOLVER VDI 40
            control Siemens 810D MANUAL TURN
            total power requirement 18,5 kW
            weight of the machine ca. 5 t
            Description :
            Equipment:
            swarf protector
            automatic cooling device
            RS 232 interface
            3-jaw chuck diameter 315mm
            automatic lubrication system
            Part-Documentation
            LUNNETTE +TURRET 12 POSISITION VDI 40
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E 30


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41776 · Lathe - cycle-controlled

          WEILER - E 30 - - 2012 - WEILER SL1

          Technical details
          turning diameter 160 mm︱turning length 750 mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: flatbed ︱- number of turrets 1 ︱WORKING RANGE TURNING ︱- swing diameter (max) 330 mm︱- turning diameter (max) 160 mm︱- worpiece length max. 750 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 1 /min︱- spindle revolutions (max) 4500 /min︱- drive power S6 40% 13 kW︱- drive power S6 60% 11 kW︱- drive power S6 40% 9 kW︱- spindle torque S6 40% 166 Nm︱- spindle torque S1 100% 115 Nm︱- spindle diameter 70 mm︱
          automatic SAUTER 8-position turret, type 0.5.480.512 26500 operating hours
            turning diameter 160 mm
            turning length 750 mm
            - design principle: flatbed
            - number of turrets 1
            - swing diameter (max) 330 mm
            - turning diameter (max) 160 mm
            - worpiece length max. 750 mm
            - spindle revolutions (min) 1 /min
            - spindle revolutions (max) 4500 /min
            - drive power S6 40% 13 kW
            - drive power S6 60% 11 kW
            - drive power S6 40% 9 kW
            - spindle torque S6 40% 166 Nm
            - spindle torque S1 100% 115 Nm
            - spindle diameter 70 mm
            Description :
            automatic SAUTER 8-position turret, type 0.5.480.512

            26500 operating hours
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MAS Turn 550i


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5401 · Lathe - cycle-controlled

          MAS - Turn 550i - - 2011 - Heidenhain Manuel Plus

          Technical details
          turning diameter 550 mm︱turning length 1600 mm︱control Heidenhain Manuel Plus
            turning diameter 550 mm
            turning length 1600 mm
            control Heidenhain Manuel Plus
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled DMT KERN CD 650


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0297 · Lathe - cycle-controlled

          DMT KERN - CD 650 - - 2010 - HEIDENHAIN MANUALplus

          Technical details
          turning diameter 650 mm︱turning length 3.000 mm︱control HEIDENHAIN MANUALplus ︱total power requirement 33 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Lathe - cycle controled / Brand: KERN-DMT / Type: CD 650 Year of construction: 2010 The machine can be inspected by appointment under working condition. Very good, operational condition (regularly serviced). Spindle hours (02/02/2021): 5.738 h TECHNICAL SPECIFICATIONS: - Control: Heidenhain MANUALplus 620 Working area: - Swing diameter over bed: 650 mm - Swing diameter over cross slide: 420 mm - Sleigh path plan: 440 mm - Turning length: 3.000 mm Horizontal bed: - Prismatic flat track guide hardened and grinded Main spindle drive: - Digital AC motor - 40% ED: 33 kW Gearbox: - ZF planetary gearbox, 2 steps - electrically switched - mounted outside the headstock Spindle cabinet: - Spindle head: Size A8, DIN 55026 - Spindle diameter in the front bearing: 140 mm - Spindle bore: 106 mm - Speed range: 1 - 2.500 rpm Cross slide: - Feed range plan: 0,001 - 1.000 mm/U - Feed range longitudinal and thread pitches: 0,001 - 2.000 mm/U - Thread pitches: 0,01 - 999,9 mm - Rapid traverse plan/ longitudinal: 5/10 m/min - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock: - Pinole diameter: 100 mm - Pinole path: 200 mm - Acquisition cone: 5 Mk - Eccentric clamping and additional clamping screw - Manual spindle sleeve actuation and clamping - Tailstock roller guide Electrical equipment: - Three-phase current: 400 V, 50 Hz Extensive equipment, accessories. - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.
            turning diameter 650 mm
            turning length 3.000 mm
            control HEIDENHAIN MANUALplus
            total power requirement 33 kW
            Description :
            Lathe - cycle controled / Brand: KERN-DMT / Type: CD 650
            Year of construction: 2010

            The machine can be inspected by appointment under working condition.

            Very good, operational condition (regularly serviced).

            Spindle hours (02/02/2021): 5.738 h

            TECHNICAL SPECIFICATIONS:
            - Control: Heidenhain MANUALplus 620

            Working area:
            - Swing diameter over bed: 650 mm
            - Swing diameter over cross slide: 420 mm
            - Sleigh path plan: 440 mm
            - Turning length: 3.000 mm

            Horizontal bed:
            - Prismatic flat track guide hardened and grinded

            Main spindle drive:
            - Digital AC motor - 40% ED: 33 kW

            Gearbox:
            - ZF planetary gearbox, 2 steps
            - electrically switched
            - mounted outside the headstock

            Spindle cabinet:
            - Spindle head: Size A8, DIN 55026
            - Spindle diameter in the front bearing: 140 mm
            - Spindle bore: 106 mm
            - Speed range: 1 - 2.500 rpm

            Cross slide:
            - Feed range plan: 0,001 - 1.000 mm/U
            - Feed range longitudinal and thread pitches: 0,001 - 2.000 mm/U
            - Thread pitches: 0,01 - 999,9 mm
            - Rapid traverse plan/ longitudinal: 5/10 m/min
            - Automatic central lubrication
            - Digital AC servo motors plan and longitudinal

            Tailstock:
            - Pinole diameter: 100 mm
            - Pinole path: 200 mm
            - Acquisition cone: 5 Mk
            - Eccentric clamping and additional clamping screw
            - Manual spindle sleeve actuation and clamping
            - Tailstock roller guide

            Electrical equipment:
            - Three-phase current: 400 V, 50 Hz

            Extensive equipment, accessories.

            - Documentation
            - CE marking

            There is no guarantee for correctness and completeness of the technical details
            and accessories.

            Detailed technical data sheet and information on equipment available on request.
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ420E


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4667 · Lathe - cycle-controlled

          SEIGER - SLZ420E - - 2010 - SIEMENS 840D Sol.Line

          Technical details
          turning diameter 430 mm︱turning length 1000 mm︱control SIEMENS 840D Sol.Line ︱swing diameter over slide rest 225 mm︱centre distance 1150 mm︱spindle turning speed range -3600 U/min︱turret head 8 Pos. ︱weight of the machine ca. 3.6 t︱dimensions of the machine ca. 4x2x2 m︱
          Misc.accessories More details on www.marcels-maschinen.ch
            turning diameter 430 mm
            turning length 1000 mm
            control SIEMENS 840D Sol.Line
            swing diameter over slide rest 225 mm
            centre distance 1150 mm
            spindle turning speed range -3600 U/min
            turret head 8 Pos.
            weight of the machine ca. 3.6 t
            dimensions of the machine ca. 4x2x2 m
            Description :
            Misc.accessories

            More details on www.marcels-maschinen.ch
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled FAT TUR 630MN


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-27 · Lathe - cycle-controlled

          FAT - TUR 630MN - - 2009 - SIEMENS 840D manual Turn

          Technical details
          turning diameter 610 mm︱turning length 2000 mm︱control SIEMENS 840D manual Turn︱swing diameter over slide rest 370 mm︱greates pass round over bed 630 mm︱turret (x-stations) 8 fach︱turning speeds 2-2500 U/min︱transmission ratio 2 ︱spindle bore 105 mm︱tool adaptor VDI-40 ︱rapid traverse longitudinal 8000 mm/min︱rapid traverse cross 6000 mm/min︱power feed longitudinal 15000 N︱power feed coss 10000 N︱tailstock quill taper MT 5 ︱tailstock quill diameter 90 mm︱tailstock quill stroke 200 mm︱total power requirement kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3700 x 2000 x 2000 mm︱
          This FAT TUR 630 cycle lathe is in very good condition and immediately available. Equipment: - Various tool holders - 8-fold tool turret - chip conveyor - bezel closed - 4-jaw face plate - VDI-40 holder changer - VDI-40 precision alignment mandrel
            turning diameter 610 mm
            turning length 2000 mm
            control SIEMENS 840D manual Turn
            swing diameter over slide rest 370 mm
            greates pass round over bed 630 mm
            turret (x-stations) 8 fach
            turning speeds 2-2500 U/min
            transmission ratio 2
            spindle bore 105 mm
            tool adaptor VDI-40
            rapid traverse longitudinal 8000 mm/min
            rapid traverse cross 6000 mm/min
            power feed longitudinal 15000 N
            power feed coss 10000 N
            tailstock quill taper MT 5
            tailstock quill diameter 90 mm
            tailstock quill stroke 200 mm
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3700 x 2000 x 2000 mm
            Description :
            This FAT TUR 630 cycle lathe is in very good condition and immediately
            available.
            Equipment:
            - Various tool holders
            - 8-fold tool turret
            - chip conveyor
            - bezel closed
            - 4-jaw face plate
            - VDI-40 holder changer
            - VDI-40 precision alignment mandrel
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER C50


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032863 · Lathe - cycle-controlled

          WEILER - C50 - - 2008 - Siemens

          Technical details
          turning diameter 570 mm︱turning length 2000 mm︱control Siemens ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Siemens control 3-jaw chuck Multifix tool holder device steady rest tail stock coolant device Technische Daten / technical details: max. Drehlänge / max. turning lenght 2000 mm Umlauf-Ø über Bett / turning Ø over bed 570 mm Umlauf-Ø über Schlitten / turning Ø over sledge 340 mm Drehzahlbereich / spindle speed 1-2500 UpM /rpm Spindelbohrung / spindle hole 83 mm Reitstockaufnahme / tail stock taper MK5 Antriebsleistung / drive capacity 30 kW Gewicht der Maschine / weight 3200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 570 mm
            turning length 2000 mm
            control Siemens
            Description :
            Siemens control
            3-jaw chuck
            Multifix tool holder device
            steady rest
            tail stock
            coolant device

            Technische Daten / technical details:
            max. Drehlänge / max. turning lenght 2000 mm
            Umlauf-Ø über Bett / turning Ø over bed 570 mm
            Umlauf-Ø über Schlitten / turning Ø over sledge 340 mm
            Drehzahlbereich / spindle speed 1-2500 UpM /rpm
            Spindelbohrung / spindle hole 83 mm
            Reitstockaufnahme / tail stock taper MK5
            Antriebsleistung / drive capacity 30 kW
            Gewicht der Maschine / weight 3200 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.



          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E 70 x 2000


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04542 · Lathe - cycle-controlled

          WEILER - E 70 x 2000 - - 2008 - Zyklen D 3

          Technical details
          turning diameter 720 / 430 mm︱turning length 2000 mm︱control Zyklen D 3 ︱turning dia. over face-slide 430 mm︱adjustment of upper support 280 mm︱spindle bore 106 mm︱speeds infinitely variable range 2 1-1800 1/min︱rapid travel - longitudinal/face 10/5 m/min︱spindle head DIN55027 Gr. 11 ︱dia. of quill 115 mm︱quill stroke 200 mm︱inner taper MT 6 MK︱power capacity 100%/60% 9/11 kW︱workpiece weight max. 1600 kg︱weight of the machine ca. 5,4 t︱dimensions of the machine ca. ca.5 x 2 x 2 m︱Mechanic: good ︱Optical condition: good ︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Pictures in condition from seller! 996 400 V, 50 Hz, control voltage. 24 V Equipment: * Three-jaw lathe chuck Röhm 400 mm diameter various interchangeable jaws * Four-jaw lathe chuck Röhm 400 mm diameter various interchangeable jaws * Flat disc Forkardt 630 mm diameter * Two lynets * Capto C4 with additional Multifix various recordings * Coolant device * Chip conveyor * new safety washer wiper set, oil change etc. * Turning test 0.025 mm on 250 mm flying * Operating instructions, spare parts list, circuit diagram * The machine is checked in the workshop and delivered with an electrical acceptance report!
            turning diameter 720 / 430 mm
            turning length 2000 mm
            control Zyklen D 3
            turning dia. over face-slide 430 mm
            adjustment of upper support 280 mm
            spindle bore 106 mm
            speeds infinitely variable range. 1-1800 1/min
            rapid travel - longitudinal/face 10/5 m/min
            spindle head DIN55027 Gr. 11
            dia. of quill 115 mm
            quill stroke 200 mm
            inner taper MT 6 MK
            power capacity 100%/60% 9/11 kW
            workpiece weight max. 1600 kg
            weight of the machine ca. 5,4 t
            dimensions of the machine ca. ca.5 x 2 x 2 m
            Description :

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            Pictures in condition from seller!

            996

            400 V, 50 Hz, control voltage. 24 V

            Equipment:

            * Three-jaw lathe chuck Röhm 400 mm diameter various interchangeable jaws
            * Four-jaw lathe chuck Röhm 400 mm diameter various interchangeable jaws
            * Flat disc Forkardt 630 mm diameter
            * Two lynets
            * Capto C4 with additional Multifix various recordings
            * Coolant device
            * Chip conveyor
            * new safety washer wiper set, oil change etc.
            * Turning test 0.025 mm on 250 mm flying

            * Operating instructions, spare parts list, circuit diagram

            * The machine is checked in the workshop and delivered with an electrical
            acceptance report!
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled CHEVALIER FCL 2160 S


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03184 · Lathe - cycle-controlled

          CHEVALIER - FCL 2160 S - - 2007 - SIEMENS 810 D

          Technical details
          greates pass round over bed 540 mm︱turn - diameter over facing slide 310 mm︱centre distance 1500 mm︱centre height 270 mm︱control SIEMENS 810 D ︱turning speed range 2250 U/min︱spindle nose A2 -11 ︱spindle bore 85 mm︱spindle taper 6 MK︱travel of carriage X/Z-axis 300/1550 mm︱feed X/Z-axis 5000 mm/min.︱rapid traverse 8000 mm/min.︱tailstock quill taper MT 5 ︱quill stroke 210 mm︱pinole diameter 75 mm︱total power requirement 12,5 kW︱weight of the machine ca. 3.7 t︱dimensions of the machine ca. 3,00 x 1,85 x 1,90 m︱
          acc.: 3-jaw chuck 200 mmØ, MULTIFIX-toolpost with various inserts, solid steady, running centre, coolant
            greates pass round over bed 540 mm
            turn - diameter over facing slid. 310 mm
            centre distance 1500 mm
            centre height 270 mm
            control SIEMENS 810 D
            turning speed range 2250 U/min
            spindle nose A2 -11
            spindle bore 85 mm
            spindle taper 6 MK
            travel of carriage X/Z-axis 300/1550 mm
            feed X/Z-axis 5000 mm/min.
            rapid traverse 8000 mm/min.
            tailstock quill taper MT 5
            quill stroke 210 mm
            pinole diameter 75 mm
            total power requirement 12,5 kW
            weight of the machine ca. 3.7 t
            dimensions of the machine ca. 3,00 x 1,85 x 1,90 m
            Description :
            acc.: 3-jaw chuck 200 mmØ, MULTIFIX-toolpost with various inserts, solid steady, running centre, coolant
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ 1000


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1569 · Lathe - cycle-controlled

          SEIGER - SLZ 1000 - - 2007 - SINUMERIK 840 D

          Technical details
          turning diameter - mm︱turning length - mm︱control SINUMERIK 840 D ︱swing over bed 1.000 mm︱swing diameter over face slide 650 mm︱Distance between centres 4.000 mm︱movement cross slide 680 mm︱bed width 750 mm︱lathe tool cross section h x w 40 x 40 mm︱main spindle : ︱spindle diameter in front bearing 360 mm︱spindle bore 200 mm︱power 60/100% ED 52/37 kW︱max. torque on the spindle 6.000 ︱turning speed range 3,55-910 U/min︱feed power X 100% ED 20.000 N︱feed power Z 100% ED 30.000 N︱rapid traverse X-axis 3 m/min︱rapid traverse Z-axis 6 m/min︱diameter of quill 160 mm︱
          accessories - full cover closed at the top - preparation for extraction system - 4-fold tool turret manufacturer SAUTER - boring bar holder mounted on cross slide - hydraulical clampable tailstock - 2 piece steady‘s, Ø 80 – 450 + Ø 440 – 800 mm - 2 piece chip conveyor longitudinal – ejection right - workroom doors automatically operated - power chuck equipment without chuck - coolant equipment with paper band filter - control SINUMERIK 840 D incl. roughing - Machine will be delivered without chuck
            turning diameter - mm
            turning length - mm
            control SINUMERIK 840 D
            swing over bed 1.000 mm
            swing diameter over face slide 650 mm
            Distance between centres 4.000 mm
            movement cross slide 680 mm
            bed width 750 mm
            lathe tool cross section h x w 40 x 40 mm
            main spindle :
            spindle diameter in front bearin. 360 mm
            spindle bore 200 mm
            power 60/100% ED 52/37 kW
            max. torque on the spindle 6.000
            turning speed range 3,55-910 U/min
            feed power X 100% ED 20.000 N
            feed power Z 100% ED 30.000 N
            rapid traverse X-axis 3 m/min
            rapid traverse Z-axis 6 m/min
            diameter of quill 160 mm
            Description :
            accessories
            - full cover closed at the top
            - preparation for extraction system
            - 4-fold tool turret manufacturer SAUTER
            - boring bar holder mounted on cross slide
            - hydraulical clampable tailstock
            - 2 piece steady‘s, Ø 80 – 450 + Ø 440 – 800 mm
            - 2 piece chip conveyor longitudinal – ejection right
            - workroom doors automatically operated
            - power chuck equipment without chuck
            - coolant equipment with paper band filter
            - control SINUMERIK 840 D incl. roughing
            - Machine will be delivered without chuck
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled KERN / DMT CD 480


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-2099 · Lathe - cycle-controlled

          KERN / DMT - CD 480 - - 2007 - Heidenhain MANUALplus 4110

          Technical details
          turning diameter 360 mm︱turning length 820 mm︱control Heidenhain MANUALplus 4110︱travel -z axis 890 mm︱swing diameter over flat guideway 475 mm︱swing diameter over face slide 260 mm︱cross movement 260 mm︱main drive motor 22/19,5/17 kW︱transmission ratio 2 ︱spindle turning speed range 1 - 3000 U/min︱spindle diameter in front bearing 110 mm︱rapid travel - longitudinal/face 10/5 m/min︱power feed longitudinal 9000 N︱power feed coss 6000 N︱tailstock quill taper MT 5 ︱tailstock quill diameter 70 mm︱tailstock quill stroke 120 mm︱total power requirement kW︱weight of the machine ca. 2,9 t︱dimensions of the machine ca. 4150 x 2825 x 1700 mm︱
          Equipped with: Control Heidenhain MANUALplus 4110 Toolholder and boring holder Chip conveyor Hydraulic unit for power-chuck Documentation Without chuck.
            turning diameter 360 mm
            turning length 820 mm
            control Heidenhain MANUALplus 4110
            travel -z axis 890 mm
            swing diameter over flat guidewa. 475 mm
            swing diameter over face slide 260 mm
            cross movement 260 mm
            main drive motor 22/19,5/17 kW
            transmission ratio 2
            spindle turning speed range 1 - 3000 U/min
            spindle diameter in front bearin. 110 mm
            rapid travel - longitudinal/face 10/5 m/min
            power feed longitudinal 9000 N
            power feed coss 6000 N
            tailstock quill taper MT 5
            tailstock quill diameter 70 mm
            tailstock quill stroke 120 mm
            weight of the machine ca. 2,9 t
            dimensions of the machine ca. 4150 x 2825 x 1700 mm
            Description :
            Equipped with:
            Control Heidenhain MANUALplus 4110
            Toolholder and boring holder
            Chip conveyor
            Hydraulic unit for power-chuck
            Documentation

            Without chuck.

          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled KERN CD 480x1500


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04582 · Lathe - cycle-controlled

          KERN - CD 480x1500 - - 2007 - 4110

          Technical details
          turning diameter 475 mm︱turning length 1500 mm︱control 4110 ︱swing diameter over bed slide 260 mm︱swing over bed 475 mm︱centre distance 1500 mm︱spindle nose size according to DIN 55026 Gr. 6 ︱spindle diameter in front bearing 110 mm︱spindle bore 70 mm︱chucking diameter 250 mm︱longitudinal feed 0,001 - 2.000 mm/U︱cross feed 0,001 - 1.000 mm/U︱rapid traverse (X / Z) 10 / 5 m/min︱turning speed range - spindle 5 - 3.000 (V-konstant) U/min︱Motor output 25 / 20 kW︱power feed plane 6.000 N︱power feed longitudinal 9.000 N︱worktool system Multifix C ︱tailstock quill taper MT 5 Mk︱Quill diameter 70 mm︱
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Machine no. 3204.07 * Heidenhain 4110 V 2 cycle control, * Coolant device, * Multifix steel holder C * Röhm 3-jaw wedge bar lathe chuck 250 * Machine shoes * Documentation complete The machine is workshop-checked and has an electrical test report!
            turning diameter 475 mm
            turning length 1500 mm
            control 4110
            swing diameter over bed slide 260 mm
            swing over bed 475 mm
            centre distance 1500 mm
            spindle nose size according to D. Gr. 6
            spindle diameter in front bearin. 110 mm
            spindle bore 70 mm
            chucking diameter 250 mm
            longitudinal feed 0,001 - 2.000 mm/U
            cross feed 0,001 - 1.000 mm/U
            rapid traverse (X / Z) 10 / 5 m/min
            turning speed range - spindle 5 - 3.000 (V-konstant) U/min
            Motor output 25 / 20 kW
            power feed plane 6.000 N
            power feed longitudinal 9.000 N
            worktool system Multifix C
            tailstock quill taper MT 5 Mk
            Quill diameter 70 mm
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            Machine no. 3204.07

            * Heidenhain 4110 V 2 cycle control,
            * Coolant device,
            * Multifix steel holder C
            * Röhm 3-jaw wedge bar lathe chuck 250
            * Machine shoes
            * Documentation complete

            The machine is workshop-checked and has an electrical test report!
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled HARRISON ALPHA 1550 U


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02792 · Lathe - cycle-controlled

          HARRISON - ALPHA 1550 U - - 2006 - FANUC 21 ITB

          Technical details
          turning diameter 554 mm︱turning length 1000 mm︱control FANUC 21 ITB ︱centre height 280 mm︱swing diameter over face slide 370 mm︱swing in the gap 830 mm︱spindle bore 90 mm︱spindle turning speed range 15 - 1800 U/min︱spindle nose D 1 - 8" Camlock ︱spindle drive 11 kW︱feeds - longitudinal 0,03 - 0,4 mm/U︱feeds - cross 0,015 - 0,2 mm/U︱rapid travel - longitudinal/face 3 / 1,5 m/min︱thread - mm pitch 14 mm︱bed width 400 mm︱radial face slide travel 310 mm︱tailstock quill diameter 95 mm︱tailstock quill stroke 145 mm︱tailstock taper MT 6 ︱tailstock adjustment out of the central pos. +/- 10 mm︱
          CNC FANUC 21 ITB Acc.: 3-jaw chuck 315 mmø,ROEHM DURO NC HYDRAULIC TURRET 8 POSITIONS VDI 40 various inserts, 1 solid steady,+ 1 MOVING STEADY coolant CHIP CONVOYER
            turning diameter 554 mm
            turning length 1000 mm
            control FANUC 21 ITB
            centre height 280 mm
            swing diameter over face slide 370 mm
            swing in the gap 830 mm
            spindle bore 90 mm
            spindle turning speed range 15 - 1800 U/min
            spindle nose D 1 - 8" Camlock
            spindle drive 11 kW
            feeds - longitudinal 0,03 - 0,4 mm/U
            feeds - cross 0,015 - 0,2 mm/U
            rapid travel - longitudinal/face 3 / 1,5 m/min
            thread - mm pitch 14 mm
            bed width 400 mm
            radial face slide travel 310 mm
            tailstock quill diameter 95 mm
            tailstock quill stroke 145 mm
            tailstock taper MT 6
            tailstock adjustment out of the . +/- 10 mm
            Description :
            CNC FANUC 21 ITB

            Acc.: 3-jaw chuck 315 mmø,ROEHM DURO NC HYDRAULIC
            TURRET 8 POSITIONS VDI 40 various inserts,
            1 solid steady,+ 1 MOVING STEADY coolant
            CHIP CONVOYER
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled FAT-HACO - ueberholt TUR 1100 MN - 810D Shopturn


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20167 · Lathe - cycle-controlled

          FAT-HACO - ueberholt - TUR 1100 MN - 810D Shopturn - - 2006 - Sinumerik 810D Shopturn

          Technical details
          centre height 550 mm︱centre distance 2000 mm︱turning diameter over bed 1100 mm︱turning diameter over slide 790 mm︱turning length 2000 mm︱spindle taper D1-11 ︱control Sinumerik 810D Shopturn ︱bed width 622 mm︱spindle bore 140 mm︱turning speed range 4-300 / 160 - 1200 U/min︱feed: 0 - 6000 mm/min︱rapid travel - longitudinal/face 6 / 6 m/min︱powered chuck diameter 630 mm︱hollow clamping cylinder dia. 117,5 mm︱tool turret 8 Pos. Sauter︱drive capacity - spindle motor 37 kW︱taper in tailstock-quill MK 6 ︱dia. of quill 140 mm︱quill stroke 220 + 80 mm︱coolant
          Machine has life tools and spindle indexation 2,5° - Serial No.: 060559 - hydr. 3-Jaw power chuck Kitagawa dia.630 mm - hydr. quill on tail stock - indexing spindle every 2,5° - 8 Pos. tool turret for life tools (Sauter) Machine is being reconditioned at present. It will be ready for sale at approx. June 2020 Price subject to change until final completion of the reconditioning work.
            centre height 550 mm
            centre distance 2000 mm
            turning diameter over bed 1100 mm
            turning diameter over slide 790 mm
            turning length 2000 mm
            spindle taper D1-11
            control Sinumerik 810D Shopturn
            bed width 622 mm
            spindle bore 140 mm
            turning speed range 4-300 / 160 - 1200 U/min
            feed: 0 - 6000 mm/min
            rapid travel - longitudinal/face 6 / 6 m/min
            powered chuck diameter 630 mm
            hollow clamping cylinder dia. 117,5 mm
            tool turret 8 Pos. Sauter
            drive capacity - spindle motor 37 kW
            taper in tailstock-quill MK 6
            dia. of quill 140 mm
            quill stroke 220 + 80 mm
            Description :
            Machine has life tools and
            spindle indexation 2,5°
            - Serial No.: 060559
            - hydr. 3-Jaw power chuck Kitagawa dia.630 mm
            - hydr. quill on tail stock
            - indexing spindle every 2,5°
            - 8 Pos. tool turret for life tools (Sauter)
            Machine is being reconditioned at present.
            It will be ready for sale at approx. June 2020
            Price subject to change until
            final completion of the
            reconditioning work.
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled GILDEMEISTER NEF 520


          • Brandner Revalue GmbH
          • Mozartstr. 24
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 928 58 75
            +49 (0) 7309 928 58 74
          • mb@b-rv.de
            www.b-rv.de
          #2011-2002003 · Lathe - cycle-controlled

          GILDEMEISTER - NEF 520 - - 2006 - DRO

          Technical details
          turning diameter 500 mm︱turning length 850 mm︱control DRO ︱greates pass round over bed 500 mm︱swing diameter over slide rest 250 mm︱chucking diameter 250 mm︱cross movement 260 mm︱drive capacity - workpiece 12 kW︱reus 10-3000 U/min︱transmission ratio 2 ︱weight of the machine ca. 2,7 t︱dimensions of the machine ca. 2,90x1,95x1,82 m︱
            turning diameter 500 mm
            turning length 850 mm
            control DRO
            greates pass round over bed 500 mm
            swing diameter over slide rest 250 mm
            chucking diameter 250 mm
            cross movement 260 mm
            drive capacity - workpiece 12 kW
            reus 10-3000 U/min
            transmission ratio 2
            weight of the machine ca. 2,7 t
            dimensions of the machine ca. 2,90x1,95x1,82 m
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled GDW 250CNC


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4610 · Lathe - cycle-controlled

          GDW - 250CNC - - 2005 - HEIDENHAIN

          Technical details
          turning diameter 248 mm︱turning length 400 mm︱control HEIDENHAIN ︱centre distance 500 mm︱spindle turning speed range -6000 U/min︱weight of the machine ca. 1.3 t︱
          Misc accessories www.marcels-maschinen.ch
            turning diameter 248 mm
            turning length 400 mm
            control HEIDENHAIN
            centre distance 500 mm
            spindle turning speed range -6000 U/min
            weight of the machine ca. 1.3 t
            Description :
            Misc accessories

            www.marcels-maschinen.ch
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 5 1000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6910 · Lathe - cycle-controlled

          MONFORTS - KNC 5 1000 - - 2005 -

          Technical details
          turning diameter 500 mm︱turning length 1000 mm︱control Monforts MTC K CNC︱turning diameter over slide 290 mm︱spindle passage 70 mm︱turning speed range 2 - 2800 U/min︱spindle motor 15 kW︱tailstock quill diameter 80 mm︱tailstock quill stroke 160 mm︱tailstock taper MT 5 ︱total power requirement kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3000 x 1800 x 1700 mm︱Control
            turning diameter 500 mm
            turning length 1000 mm
            control Monforts MTC K CNC
            turning diameter over slide 290 mm
            spindle passage 70 mm
            turning speed range 2 - 2800 U/min
            spindle motor 15 kW
            tailstock quill diameter 80 mm
            tailstock quill stroke 160 mm
            tailstock taper MT 5
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3000 x 1800 x 1700 mm
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled HARRISON Alpha 400 T


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20166 · Lathe - cycle-controlled

          HARRISON - Alpha 400 T - - 2005 - FANUC

          Technical details
          centre height 195 mm︱centre distance 1250 mm︱turning diameter over bed 400 mm︱turning diameter over slide 245 mm︱turning dia. in gap 585 mm︱turning length 1250 mm︱spindle taper CAMLOCK KK 6 DIN 55029︱control FANUC ︱bed width 320 mm︱spindle bore 55 mm︱turning speed range 15 - 2500 U/min︱rapid travel - longitudinal/face 4 / 3 m/min︱quick change toolholder PARAT ︱drive capacity - spindle motor 7,7 kW︱taper in tailstock-quill MK 5 ︱dia. of quill 75 mm︱quill stroke 150 mm︱coolant ︱voltage 400 V︱total power requirement 11,0 kW︱
          - Serial-No.: D3D040/17 - control: FANUC - with live steady - fixed steady - 4-jaw chuck Ø 250 mm - coolant equipment
            centre height 195 mm
            centre distance 1250 mm
            turning diameter over bed 400 mm
            turning diameter over slide 245 mm
            turning dia. in gap 585 mm
            turning length 1250 mm
            spindle taper CAMLOCK KK 6 DIN 55029
            control FANUC
            bed width 320 mm
            spindle bore 55 mm
            turning speed range 15 - 2500 U/min
            rapid travel - longitudinal/face 4 / 3 m/min
            quick change toolholder PARAT
            drive capacity - spindle motor 7,7 kW
            taper in tailstock-quill MK 5
            dia. of quill 75 mm
            quill stroke 150 mm
            voltage 400 V
            total power requirement 11,0 kW
            Description :
            - Serial-No.: D3D040/17
            - control: FANUC
            - with live steady
            - fixed steady
            - 4-jaw chuck Ø 250 mm
            - coolant equipment
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   


          Cycle controlled Lathe from LagerMaschinen
          Cycle controlled Lathe from LagerMaschinen

          In the world of business and production management the cycle controlled lathe draws from several other instruments. Lathes are used in modern and classical carpentry as well as modern electrical and metal pipe work. As with any machine it's important to seek advice from top consultants when purchasing such an item. LagerMaschinen's wide selection of the the cycle controlled lathe will certainly make your choices easier. Please visit the website today to get started on LagerMaschinen.

          LagerMaschinen provides everything you need.

          LagerMaschinen's wide array of services offers its clients many opportunities. For instance you can have your new-but-used used machine correctly installed and connected - both electrically and within the entire computer network - so you can get back to production and production management. With a cycle controlled lathe from LagerMaschinen you'll also have free access to senders and machine experts and be able to ask advice as well as ensure the quality of your machine. LagerMaschinen's wide network in the machining industry means you'll be able to find the exact machine you need around the corner or at least know when you can 'give it a spin'. The cycle controlled lathe from LagerMaschinen - log on today.

          A used machine gets you where you want to be.

          The cycle controlled lathe from LagerMaschinen will certainly increase your bottom line - whether working in the plastics industry or in metalworks a cycle controlled lathe from LagerMaschinen can raise revenue annually and within the short term. Take advantage of LagerMaschinen's various add-ons such as customized delivery and installation. LagerMaschinen.de's cycle controlled lathe - start looking today.