Réseau européen de revendeurs de machines de stockage

Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Metal Processing - CNC Turning- and Milling Center

          Machinelist: Centre de tournage et de fraisage CNC


          CNC Turning- and Milling Center

          Centre de tournage et de fraisage CNC d'occasion DMG MORI NTX 2000/1500 S2 2nd


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8621 · CNC Turning- and Milling Center

          DMG MORI - NTX 2000/1500 S2 2nd - - 2019 - F31iB5 Fanuc

          Technical details
          swing diameter max. 700 mm︱turning length max. 1.538 mm︱control F31iB5 Fanuc︱max. turning diameter 670 mm︱max. bar capacity 65 mm︱distance between spindles 1.822 mm︱Main spindle: ︱max. spindle speed 5.000 min/-1︱power capacity - main spindel 15 / 11 kW︱max. bar capacity 65 mm︱chucking diameter 250 mm︱Subspindle: ︱max. spindle speed 5.000 min/-1︱power capacity - Sub spindle 15 / 11 kW︱max. bar capacity (65) mm︱chucking diameter 250 mm︱Milling Spindle: ︱max. spindle speed 12.000 min/-1︱power capacity - milling spindle 22 kW︱max. Torque 122 Nm︱
          CNC-Turning- and Millingcenter DMG MORI - NTX 2000/1500 S2 2nd - like new! Only ca. 21h Operating-Hours! - 5 Axis - Main-, Sub- and Swivel-Milling-Spindle
            swing diameter max. 700 mm
            turning length max. 1.538 mm
            control F31iB5 Fanuc
            max. turning diameter 670 mm
            max. bar capacity 65 mm
            distance between spindles 1.822 mm
            max. spindle speed 5.000 min/-1
            power capacity - main spindel 15 / 11 kW
            max. bar capacity 65 mm
            chucking diameter 250 mm
            max. spindle speed 5.000 min/-1
            power capacity - Sub spindle 15 / 11 kW
            max. bar capacity (65) mm
            chucking diameter 250 mm
            max. spindle speed 12.000 min/-1
            power capacity - milling spindle 22 kW
            max. Torque 122 Nm
            Description :
            CNC-Turning- and Millingcenter
            DMG MORI - NTX 2000/1500 S2 2nd

            - like new! Only ca. 21h Operating-Hours!
            - 5 Axis
            - Main-, Sub- and Swivel-Milling-Spindle

          Datasheet
          Request / Contact
          Tours d'occasion Centre de tournage et de fraisage CNC MAZAK Quick Turn Smooth 250 MSY


          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande

          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-V2014 · CNC Turning- and Milling Center

          MAZAK - Quick Turn Smooth 250 MSY - - 2018 - Mazatrol Smooth G

          Technical details
          turning diameter 276 mm︱turning length 200 mm︱spindle bore diameter 80 mm︱Spindle Speed 4.000 1/min︱spindle motor 26 kW︱X-Axis movement 234 mm︱Y-Axis movement 100 mm︱Z-Axis movement 625 mm︱W-axis movement (subspindle to mainspindle) 585 mm︱Minimum indexing C-Axis main Spindle 0,0001 °︱Minimum Indexing C Axis Sub Spindle 0,001 °︱Number of tools on turret 12 ︱Number of driven tools 12 x︱Spindle speed driven tools 5.000 1/min︱Spindle motor driven tools 6 kW︱Tool type Mazak VDI ︱control Mazatrol Smooth G ︱Length 2760 mm︱Width 1845 mm︱Height 1857 mm︱
            turning diameter 276 mm
            turning length 200 mm
            spindle bore diameter 80 mm
            Spindle Speed 4.000 1/min
            spindle motor 26 kW
            X-Axis movement 234 mm
            Y-Axis movement 100 mm
            Z-Axis movement 625 mm
            W-axis movement (subspindle to m. 585 mm
            Minimum indexing C-Axis main Spi. 0,0001 °
            Minimum Indexing C Axis Sub Spin. 0,001 °
            Number of tools on turret 12
            Number of driven tools 12 x
            Spindle speed driven tools 5.000 1/min
            Spindle motor driven tools 6 kW
            Tool type Mazak VDI
            control Mazatrol Smooth G
            Length 2760 mm
            Width 1845 mm
            Height 1857 mm
          Datasheet
          Request / Contact
          Tours Centre de tournage et de fraisage CNC DMG MORI NLX 2000 SY / 500


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8488 · CNC Turning- and Milling Center

          DMG MORI - NLX 2000 SY / 500 - - 2018 - M 730 UM CELOS

          Technical details
          turning diameter max. 366 mm︱turning length 510 mm︱control M 730 UM CELOS︱greates pass round over bed 923,8 mm︱Swing dia. over traverse guideway 755 mm︱standard turning dia. 275 mm︱distance between spindles 500 mm︱Main spindle: ︱turning speed range - main spindle 5.000 min/-1︱power capacity - main spindel 15 / 11 kW︱spindle nose JIS A-6 ︱spindle bearing diameter 120 mm︱spindle bore 73 mm︱max. bar capacity 65 mm︱usable bar diameter ( - ) mm︱C-Axis 0,001 °︱chucking diameter 200 mm︱Subspindel: ︱Spindle speed range subspindle 6.000 min/-1︱power capacity - Sub spindle 11 / 7,5 kW︱
          CNC - Turning- and MillingCenter DMG MORI - NLX 2000 SY / 500 - Subspindle - C-Axis - Y-Axis - Tool-Drive - Only 600h Operating-Hours
            turning diameter max. 366 mm
            turning length 510 mm
            control M 730 UM CELOS
            greates pass round over bed 923,8 mm
            Swing dia. over traverse guidewa. 755 mm
            standard turning dia. 275 mm
            distance between spindles 500 mm
            turning speed range - main spind. 5.000 min/-1
            power capacity - main spindel 15 / 11 kW
            spindle nose JIS A-6
            spindle bearing diameter 120 mm
            spindle bore 73 mm
            max. bar capacity 65 mm
            usable bar diameter ( - ) mm
            C-Axis 0,001 °
            chucking diameter 200 mm
            Spindle speed range subspindle 6.000 min/-1
            power capacity - Sub spindle 11 / 7,5 kW
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI - NLX 2000 SY / 500

            - Subspindle
            - C-Axis
            - Y-Axis
            - Tool-Drive

            - Only 600h Operating-Hours


          Datasheet
          Request / Contact
          Centre de tournage et de fraisage CNC d'occasion DMG MORI GILDEMEISTER CTX ECOTURN 510


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02726 · CNC Turning- and Milling Center

          DMG MORI GILDEMEISTER - CTX ECOTURN 510 - - 2016 - SIEMENS 840 SL SHOP TURN

          Technical details
          turning diameter 680 mm︱turning length 1050 mm︱control SIEMENS 840 SL SHOP TURN ︱turning dia. over face-slide 455 mm︱cross movement 300 mm︱turning speeds 3250 1/min︱spindle hollow 102 mm︱spindle 33/22 kW︱turret head 12 pos.︱turret head drive 4.2 kW︱rapid travel x/y/z 30 / 10/ 30 m/min︱rotational speed range of tools 4000 1/min︱speed range C-axis 100 1/min︱spindle bore 102 mm︱tailstock quill taper MT 5 ︱tailstock movement 6 m/min︱total power requirement 50 kVA︱weight of the machine ca. 8 t︱
          CTX ECOTURN 510 NEW DESIGN WITH MOWING TOOLS C AXIS + Y AXIS 1000 WORKING HOURS CNC CONTROL SIEMENS 840 SL SHOP TURN
            turning diameter 680 mm
            turning length 1050 mm
            control SIEMENS 840 SL SHOP TURN
            turning dia. over face-slide 455 mm
            cross movement 300 mm
            turning speeds 3250 1/min
            spindle hollow 102 mm
            spindle 33/22 kW
            turret head 12 pos.
            turret head drive 4.2 kW
            rapid travel x/y/z 30 / 10/ 30 m/min
            rotational speed range of tools 4000 1/min
            speed range C-axis 100 1/min
            spindle bore 102 mm
            tailstock quill taper MT 5
            tailstock movement 6 m/min
            total power requirement 50 kVA
            weight of the machine ca. 8 t
            Description :
            CTX ECOTURN 510 NEW DESIGN
            WITH MOWING TOOLS C AXIS + Y AXIS
            1000 WORKING HOURS
            CNC CONTROL SIEMENS 840 SL SHOP TURN

          Datasheet
          Request / Contact
          Centre de tournage et de fraisage CNC MAIER MLK 36D


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-39768 · CNC Turning- and Milling Center

          MAIER - MLK 36D - - 2016 - SIEMENS 840 D

          Technical details
          turning diameter 36 mm︱turning length mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 3 ︱WORKING RANGE TURNING ︱- turning diameter (max) 36 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 6000 /min︱- spindle positioning 5 °︱- c-axis: yes ︱COUNTER SPINDLE ︱- spindle revolutions (max) 6000 /min︱- spindle positioning 5 °︱- c-axis: yes ︱ELECTRICAL SPECIFICATIONS ︱- total power consumption 25.7 kW︱- mains voltage 400 V︱- mains frequency 50 Hz︱
            turning diameter 36 mm
            turning length mm
            - number of spindles 3
            - turning diameter (max) 36 mm
            - spindle revolutions (max) 6000 /min
            - spindle positioning 5 °
            - c-axis: yes
            - spindle revolutions (max) 6000 /min
            - spindle positioning 5 °
            - c-axis: yes
            - total power consumption 25.7 kW
            - mains voltage 400 V
            - mains frequency 50 Hz
          Datasheet
          Request / Contact
          Tours d'occasion Centre de tournage et de fraisage CNC GEORG Ultraturn 4000 MC


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80413 · CNC Turning- and Milling Center

          GEORG - Ultraturn 4000 MC - - 2016 -

          Technical details
          turning diameter over bed 4000 mm︱turning diameter over slide rest 3500 mm︱turning length 10950 mm︱turning speed range: 1-300 U/min︱power capacity 171 kW︱workpiece weight with 2 steadies 180000 kg︱max. workpiece weight between centres 75000 kg︱Total weight, approx. 350.000 kg︱dimensions of the machine ca. 28,6 x 10,8 x 4,1 m︱workpiece weight with one steady 140000 kg︱max. workpiece weight -without tailstock 10000 kg︱faceplate diameter 2200 mm︱turning speed range - C-axis 0-5 U/min︱max. torque on the working spindle ca. 7200 Nm︱tailstock - quill dia 530 mm︱quill adjustment - autom. and manual 100 mm︱tailstock adjustment 11134 mm︱tailstock travel rapid travel 0-4000 mm/min︱z-axis 15000 mm︱x-axis 1600 mm︱
          Turning- milling- grinding center for complete machining of turbine rotors, rolls and shafts. machine is in excellent condition with following configuration: - SIEMENS Sinumerik 840 D SL Operate - sviwel axi in ram (A-Axis) - turning attachment C6 - width 84 mm - turning attachment C8 - width 100 mm - milling extension - 81 kW - angle milling head, Standard - 81 kW - angle milling head, narrow - 10 kW - universal milling head - 30 kW - milling head for milling discs (Slotter) - 81 kW - grinding attachment for external grinding - 30 kW - 3 steady bases - 2 hydrodynamic steady tops - 2 workpiece clamings for hydrodynamic steady tops - 10 exchangable bearing shells for steady tops - 1 roller steady in C-execution - 1 hydraulic workpiece release - cooling system - dust exhaust system - plastic chips exhaust - video-control - Pick-up station for 8 heads - storage place for 3 milling discs - pillar sviweling crane - 250 kg - automatic tool changing system - 102 Plätze - tool cleaning system - tool breakage monitoring - workpiece measuring system Renishaw - 2-point measuring system - complete housing - Georg Maintenance System (GMS) Basis plus vibration monitoring
            turning diameter over bed 4000 mm
            turning diameter over slide rest 3500 mm
            turning length 10950 mm
            turning speed range: 1-300 U/min
            power capacity 171 kW
            workpiece weight with 2 steadies 180000 kg
            max. workpiece weight between ce. 75000 kg
            Total weight, approx. 350.000 kg
            dimensions of the machine ca. 28,6 x 10,8 x 4,1 m
            workpiece weight with one steady 140000 kg
            max. workpiece weight -without t. 10000 kg
            faceplate diameter 2200 mm
            turning speed range - C-axis 0-5 U/min
            max. torque on the working spind. ca. 7200 Nm
            tailstock - quill dia 530 mm
            quill adjustment - autom. and ma. 100 mm
            tailstock adjustment 11134 mm
            tailstock travel r. 0-4000 mm/min
            z-axis 15000 mm
            x-axis 1600 mm
            Description :
            Turning- milling- grinding center for complete machining of turbine rotors,
            rolls and shafts.
            machine is in excellent condition with following configuration:
            - SIEMENS Sinumerik 840 D SL Operate
            - sviwel axi in ram (A-Axis)
            - turning attachment C6 - width 84 mm
            - turning attachment C8 - width 100 mm
            - milling extension - 81 kW
            - angle milling head, Standard - 81 kW
            - angle milling head, narrow - 10 kW
            - universal milling head - 30 kW
            - milling head for milling discs (Slotter) - 81 kW
            - grinding attachment for external grinding - 30 kW
            - 3 steady bases
            - 2 hydrodynamic steady tops
            - 2 workpiece clamings for hydrodynamic steady tops
            - 10 exchangable bearing shells for steady tops
            - 1 roller steady in C-execution
            - 1 hydraulic workpiece release
            - cooling system
            - dust exhaust system
            - plastic chips exhaust
            - video-control
            - Pick-up station for 8 heads
            - storage place for 3 milling discs
            - pillar sviweling crane - 250 kg
            - automatic tool changing system - 102 Plätze
            - tool cleaning system
            - tool breakage monitoring
            - workpiece measuring system Renishaw
            - 2-point measuring system
            - complete housing
            - Georg Maintenance System (GMS) Basis plus vibration monitoring

          Datasheet
          Request / Contact
          Tours Centre de tournage et de fraisage CNC TAKISAWA TMM-250M1


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05603 · CNC Turning- and Milling Center

          TAKISAWA - TMM-250M1 - - 2016 - Fanuc Series 31i-Model B

          Technical details
          turning diameter 350 mm︱turning length 800/200 mm︱control Fanuc Series 31i-Model B ︱total power requirement 8,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          First machine installation January 2017 Please note the hours of operation on picture 2! Special feature of the machine: This machine has 2 spindles and 2 revolvers. She is able to work with both revolvers at one Spindle (4 axes) to work. With collet chuck + collets 2 x 3 jaw chucks diameter 200 mm for main and counter spindle Various standard and driven holders The machine is sold without bar loader. Basic equipment of the machine • 32 bit FANUC CNC control with Manual Guide i (Tiwap) and Internet interface • 10.4 inch LCD color screen • AC-digital FANUC spindle and axis motors • Both spindles with C-axis (built-in motors with oil cooler) • both spindles with disc brake, • Drive power left spindle 15/22 KW, • Torque max. 433 Nm, • speed max. 4,000 min / -1, • Spindle nose A2-8 with protective flange on cylindrical 220 mm, Li. Spindle bore 86 mm, • Bar passage 76 mm, • Clamping cylinder type SMW VNK 170/77, • drive power right spindle 11 / 18,5 KW, • Torque max. 326 Nm, • speed max. 4,000 min / -1, • Spindle nose A2- 6 with protection flange on cylindrical 170 mm, • Right spindle bore 63 mm1 • Bar passage 51 mm, • Clamping cylinder type SMW VNK 130/52, • 2 VDI 40 turrets with 15 tool places each (Double holders are possible, therefore up to 60 tool slots in the machine) • Max. 15 driven tool holders per revolver, • Y-axis 100 mm (+/- 50 mm) guided flat in the upper turret, • M-function for opening / closing the chucks, • Drive power of the driven tools 3.7 / 5.5 KW, • Speed ??of the driven tools max. 4,000 min / -1, • Torque max. 35 Nm, • Tapping without length compensation (Rigid Tapping) • distance between the spindle noses 1130 mm, Max. Turning length 760/200 mm, • Chuck blowout of the right spindle via M command • Footswitch for both chucks • coolant device 4 bar, • Radiator to regulate the coolant Standard accessories: • Automatic central lubrication, • cast construction (Meehanite cast), • X and Y axes as hardened sliding guides, opposite side Turcite coated • Z and A axes with roller guide, • machine panel with workspace lighting, • 1 set of machine documentation, • Integrated alignment screws and shims • CE compliant Optional accessories: Main spindle Hainbuch chuck 65mm is on the machine at the moment Counter spindle Hainbuch collet 65mm is currently on the machine 3 - colored signal lamp (continuous light) for displaying the respective operating state of the machine. 2 x high pressure coolant pump 9 bar (unit price € 1,870.00) Workpiece removal device for drop pieces below the right spindle. The workpiece removal is installed in the lower turret on a station. A conveyor belt transports the parts to the right. It can workpieces up to max. 3.0 kg and a length of 280 mm and a Diameter of 70 mm can be removed. Tool monitoring system (Raku Raku) with Sister tool call by monitoring the drive motors or pre-set tool life revolver. Hinge strap - Chip conveyor to the right. The pitch angle is about 60 degrees, the ejection height 850 mm above the corridor. Bar loader interface with Blok-Skip function Contour Input of the machining contour with angle and radius indication possible. Helical interpolation for driven tools (allows thread milling) Digital display for clamping path monitoring. Digital display, which is located on the front control panel and for easy adjustment of the clamping range is used. There are 13 off standard toolholders and 9 off boring toolholders Thre are 2 off radial driven toolholders
            turning diameter 350 mm
            turning length 800/200 mm
            control Fanuc Series 31i-Model B
            total power requirement 8,5 kW
            Description :
            First machine installation January 2017
            Please note the hours of operation on picture 2!

            Special feature of the machine:
            This machine has 2 spindles and 2 revolvers.
            She is able to work with both revolvers at one
            Spindle (4 axes) to work.

            With collet chuck + collets
            2 x 3 jaw chucks diameter 200 mm for main and counter spindle
            Various standard and driven holders

            The machine is sold without bar loader.

            Basic equipment of the machine

            • 32 bit FANUC CNC control with Manual Guide i (Tiwap) and
            Internet interface
            • 10.4 inch LCD color screen
            • AC-digital FANUC spindle and axis motors

            • Both spindles with C-axis (built-in motors with oil cooler)
            • both spindles with disc brake,
            • Drive power left spindle 15/22 KW,
            • Torque max. 433 Nm,
            • speed max. 4,000 min / -1,
            • Spindle nose A2-8 with protective flange on cylindrical 220 mm,
            Li. Spindle bore 86 mm,
            • Bar passage 76 mm,
            • Clamping cylinder type SMW VNK 170/77,
            • drive power right spindle 11 / 18,5 KW,
            • Torque max. 326 Nm,
            • speed max. 4,000 min / -1,
            • Spindle nose A2- 6 with protection flange on
            cylindrical 170 mm,
            • Right spindle bore 63 mm1
            • Bar passage 51 mm,
            • Clamping cylinder type SMW VNK 130/52,


            • 2 VDI 40 turrets with 15 tool places each
            (Double holders are possible, therefore up to 60 tool slots in the machine)
            • Max. 15 driven tool holders per revolver,
            • Y-axis 100 mm (+/- 50 mm) guided flat in the upper turret,

            • M-function for opening / closing the chucks,
            • Drive power of the driven tools 3.7 / 5.5 KW,
            • Speed ??of the driven tools max. 4,000 min / -1,
            • Torque max. 35 Nm,
            • Tapping without length compensation
            (Rigid Tapping)
            • distance between the spindle noses 1130 mm,
            Max. Turning length 760/200 mm,

            • Chuck blowout of the right spindle via M command
            • Footswitch for both chucks
            • coolant device 4 bar,
            • Radiator to regulate the coolant

            Standard accessories:

            • Automatic central lubrication,
            • cast construction (Meehanite cast),
            • X and Y axes as hardened sliding guides, opposite side Turcite
            coated
            • Z and A axes with roller guide,
            • machine panel with workspace lighting,
            • 1 set of machine documentation,
            • Integrated alignment screws and shims
            • CE compliant

            Optional accessories:

            Main spindle Hainbuch chuck 65mm is on the machine at the moment
            Counter spindle Hainbuch collet 65mm is currently on the machine

            3 - colored signal lamp (continuous light)
            for displaying the respective operating state of the machine.
            2 x high pressure coolant pump 9 bar (unit price € 1,870.00)
            Workpiece removal device for drop pieces below the
            right spindle.
            The workpiece removal is installed in the lower turret on a station.
            A conveyor belt transports the parts to the right.
            It can workpieces up to max. 3.0 kg and a length of 280 mm and a
            Diameter of 70 mm can be removed.
            Tool monitoring system (Raku Raku) with
            Sister tool call by monitoring the drive motors or
            pre-set tool life revolver.
            Hinge strap - Chip conveyor to the right.
            The pitch angle is about 60 degrees,
            the ejection height 850 mm above the corridor.
            Bar loader interface with Blok-Skip function
            Contour
            Input of the machining contour with angle and radius indication possible.
            Helical interpolation for driven tools (allows thread milling)
            Digital display for clamping path monitoring.
            Digital display, which is located on the front control panel
            and for easy adjustment of the clamping range is used.

            There are 13 off standard toolholders and 9 off boring toolholders

            Thre are 2 off radial driven toolholders

          Datasheet
          Request / Contact
          Centre de tournage et de fraisage CNC DMG-MORI EcoTurn 450 V3 d'occasion


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18177 · CNC Turning- and Milling Center

          DMG-MORI - EcoTurn 450 V3 - - 2016 - Siemens 840 D SL SHOPTURN

          Technical details
          turning diameter 400 mm︱turning length 600 mm︱control Siemens 840 D SL SHOPTURN ︱turning dia. over face-slide 480 mm︱turning speeds 4000 1/min︱spindle 17,5 / 12,5 kW︱turret head 12 pos.︱turret head drive 4,2 kW︱rotational speed range of tools 4000 1/min︱tailstock quill taper MT 5 ︱quill stroke 500 mm︱rapid travel x/y/z 30 m/min︱bar capacity 65 mm︱workpiece weight max. 800 kg︱total power requirement 27 kVA︱weight of the machine ca. 5,8 t︱
          equipped with: - Siemens 840D SL - 12 driven tools (VDI 40) - Chip conveyor - Tailstock - 3 jaw chuck dia 250mm - Coolant pump 12bar
            turning diameter 400 mm
            turning length 600 mm
            control Siemens 840 D SL SHOPTURN
            turning dia. over face-slide 480 mm
            turning speeds 4000 1/min
            spindle 17,5 / 12,5 kW
            turret head 12 pos.
            turret head drive 4,2 kW
            rotational speed range of tools 4000 1/min
            tailstock quill taper MT 5
            quill stroke 500 mm
            rapid travel x/y/z 30 m/min
            bar capacity 65 mm
            workpiece weight max. 800 kg
            total power requirement 27 kVA
            weight of the machine ca. 5,8 t
            Description :
            equipped with:
            - Siemens 840D SL
            - 12 driven tools (VDI 40)
            - Chip conveyor
            - Tailstock
            - 3 jaw chuck dia 250mm
            - Coolant pump 12bar


          Datasheet
          Request / Contact
          Centre de tournage et de fraisage CNC TSUGAMI HS 20 M / 5 AX d'occasion


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8571 · CNC Turning- and Milling Center

          TSUGAMI - HS 20 M / 5 AX - - 2015 - Fanuc 31i-B5

          Technical details
          turning diameter 3 - max. 20 mm︱turning length max. 50 mm︱control Fanuc 31i-B5 ︱max. machining diameter 20 mm︱Main spindle: ︱turning speed range - main spindle 200 - 10.000 min/-1︱power capacity - main spindel 2,2 / 3,7 kW︱max. drilling diameter 10 mm︱max. thread diameter M8 ︱C-Axis 360 °︱Subspindle: ︱Spindle speed range subspindle 200 - 12.000 min/-1︱power capacity - Sub spindle 1,5 / 2,2 kW︱max. drilling diameter 7 mm︱max. thread diameter M6 ︱C-Axis 360 °︱Work tool spindle: ︱turning speed range - Tool Spindle 300 - 30.000 min/-1︱power capacity - Tool Spindle 3,7 / 5,5 kW︱max. drilling diameter 7 mm︱
          CNC-Precision-Lathe TSUGAMI - HS 20 M / 5 AX - Swivel-Milling-Spindle - Subspindle - Rear-Side-Machining - Tool-Drive - only ca. 1.000h Spindle-hrs.! Power-On: ca. 10.300h - 5-Axis-Simultaneous-Controlling - 8 Axis (X1/X2/Y/Z1/Z2/C1/C2/B)
            turning diameter 3 - max. 20 mm
            turning length max. 50 mm
            control Fanuc 31i-B5
            max. machining diameter 20 mm
            turning speed range - main spind. 200 - 10.000 min/-1
            power capacity - main spindel 2,2 / 3,7 kW
            max. drilling diameter 10 mm
            max. thread diameter M8
            C-Axis 360 °
            Spindle speed range subspindle 200 - 12.000 min/-1
            power capacity - Sub spindle 1,5 / 2,2 kW
            max. drilling diameter 7 mm
            max. thread diameter M6
            C-Axis 360 °
            turning speed range - Tool Spind. 300 - 30.000 min/-1
            power capacity - Tool Spindle 3,7 / 5,5 kW
            max. drilling diameter 7 mm
            Description :
            CNC-Precision-Lathe
            TSUGAMI - HS 20 M / 5 AX

            - Swivel-Milling-Spindle
            - Subspindle
            - Rear-Side-Machining
            - Tool-Drive
            - only ca. 1.000h Spindle-hrs.! Power-On: ca. 10.300h
            - 5-Axis-Simultaneous-Controlling
            - 8 Axis (X1/X2/Y/Z1/Z2/C1/C2/B)
          Datasheet
          Request / Contact
          Tours Centre de tournage et de fraisage CNC DMG-MORI SEIKI NT 4250 / 1500 S


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17609 · CNC Turning- and Milling Center

          DMG-MORI SEIKI - NT 4250 / 1500 S - - 2015 - F31i A5

          Technical details
          turning diameter 660 / 350 mm︱turning length 1542 mm︱control F31i A5 ︱swing diameter max. 730 mm︱Main spindle: ︱Max. rpm 4000 min/-1︱transmission ratio 2 ︱power capacity - main spindel 26 / 22 kW︱Bar feed 80 mm︱usable bar diameter 80 mm︱spindle nose JIS A2-8 ︱C-Axis 0,001 °︱chucking diameter 300 mm︱Subspindel: ︱Max. rpm 4000 min/-1︱transmission ratio 2 ︱power capacity - Sub spindle 26 / 22 kW︱Bar feed max. 80 mm︱usable bar diameter 80 mm︱spindle nose JIS A2-8
          equipped with: - CNC Control F31i A5 - (Spindle 1) KITAGAWA 12" Hollow Chuck - (Spindle 2) KITAGAWA 12" Hollow Chuck - Tool spindle full indexing specifications - Spindle 2 tailstock specifications - Tool storage capacity 40 tools(Capto C6) - Coolant gun - Super-high pressure coolant system(7.0MPa) - Coolant cooling system (separate type) - Mist collector I/F(duct only, dia.200mm) - Chip conveyor (right discharge, hinge type)(/1500) - In-machine workpiece tool presetter for tool spindle(in-out type) - Direct scal feedback for X-axis(tool spindle) - Direct scal feedback for Y-axis(tool spindle) - Direct scal feedback for Z-axis(tool spindle)(/1500) - Chuck foot switch(double) for Main and Counter spindle - Signal lower 3 layers(Red, yellow, green) LED type - Total counter - Manual pulse generator(separate type) - Cooling unit for electrical cabinet - Programming resolution mutipiled by 1/10 - Memory card for Data server(CF card 1 GB) - Playback - Spindle 1 hobbing function - Automatic corner override - Coordinate system rotation - Addition of optional block skip (soft key type 2-9) - Direct drawing dimension programming - Interruption type custom macro - Tool offsets 480 sets in total - KCs mark 65kVA E30373 EMC(including cable) - Invo-Milling package Capto C6 CE-Sign and only 5h (!!) Working Hours
            turning diameter 660 / 350 mm
            turning length 1542 mm
            control F31i A5
            swing diameter max. 730 mm
            Max. rpm 4000 min/-1
            transmission ratio 2
            power capacity - main spindel 26 / 22 kW
            Bar feed 80 mm
            usable bar diameter 80 mm
            spindle nose JIS A2-8
            C-Axis 0,001 °
            chucking diameter 300 mm
            Max. rpm 4000 min/-1
            transmission ratio 2
            power capacity - Sub spindle 26 / 22 kW
            Bar feed max. 80 mm
            usable bar diameter 80 mm
            spindle nose JIS A2-8
            Description :
            equipped with:
            - CNC Control F31i A5

            - (Spindle 1) KITAGAWA 12" Hollow Chuck
            - (Spindle 2) KITAGAWA 12" Hollow Chuck
            - Tool spindle full indexing specifications
            - Spindle 2 tailstock specifications
            - Tool storage capacity 40 tools(Capto C6)
            - Coolant gun
            - Super-high pressure coolant system(7.0MPa)
            - Coolant cooling system (separate type)
            - Mist collector I/F(duct only, dia.200mm)
            - Chip conveyor (right discharge, hinge type)(/1500)
            - In-machine workpiece tool presetter for tool spindle(in-out type)
            - Direct scal feedback for X-axis(tool spindle)
            - Direct scal feedback for Y-axis(tool spindle)
            - Direct scal feedback for Z-axis(tool spindle)(/1500)
            - Chuck foot switch(double) for Main and Counter spindle
            - Signal lower 3 layers(Red, yellow, green) LED type
            - Total counter
            - Manual pulse generator(separate type)
            - Cooling unit for electrical cabinet
            - Programming resolution mutipiled by 1/10
            - Memory card for Data server(CF card 1 GB)
            - Playback
            - Spindle 1 hobbing function
            - Automatic corner override
            - Coordinate system rotation
            - Addition of optional block skip (soft key type 2-9)
            - Direct drawing dimension programming
            - Interruption type custom macro
            - Tool offsets 480 sets in total
            - KCs mark 65kVA E30373 EMC(including cable)
            - Invo-Milling package Capto C6

            CE-Sign and only 5h (!!) Working Hours

          Datasheet
          Request / Contact
          Tours d'occasion Centre de tournage et de fraisage CNC MEKITURN TNC890 X3000


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05076 · CNC Turning- and Milling Center

          MEKITURN - TNC890 X3000 - - 2015 - Heidenhain manual plus620

          Technical details
          serial number B5155730E ︱control Heidenhain manual plus620 ︱centre height 345 mm︱ 890 mm︱bed width 480 mm︱turning length 3.000 mm︱spindle turning speed range 1.500 U/min︱spindle bore diameter 104 mm︱spindle drive 24 kW︱chucking diameter 300 mm︱ 400 ︱rapid traverse X-axis 5 m/min︱rapid traverse Z-axis 10 m/min︱coolant ja ︱chip conveyor ja
            serial number B5155730E
            control Heidenhain manual plus620
            centre height 345 mm
            890 mm
            bed width 480 mm
            turning length 3.000 mm
            spindle turning speed range 1.500 U/min
            spindle bore diameter 104 mm
            spindle drive 24 kW
            chucking diameter 300 mm
            400
            rapid traverse X-axis 5 m/min
            rapid traverse Z-axis 10 m/min
            coolant ja
            chip conveyor ja
          Datasheet
          Request / Contact
          tours et centres de fraisage CNC d'occasion SPINNER TTC 300 52 SMMCY


          • STEINHAND GmbH
          • Wiehagen 10
          • 45472 Mülheim a.d. Ruhr
          • Deutschland

          • +49 (0) 208 / 78 239 760
            +49 (0) 208 / 78 239 685
          • info@steinhand.de
            www.steinhand.de
          #2026-1185 · CNC Turning- and Milling Center

          SPINNER - TTC 300 52 SMMCY - - 2014 - Fanuc 31i

          Technical details
          max. swing dia. ~ 400 mm︱max. turning diameter ~ 200 mm︱Max. Turning length ~ 400 mm︱travel -x1 axis 180 mm︱travel -x2 axis 110 mm︱travel -z axis 450 mm︱control Fanuc 31i ︱- - - turning spindle 1 - - - - - - - - -︱max. turning speeds 5.000 U/min.︱chucking diameter 210 mm︱spindle passage 42 mm︱- - - turning spindle 2 - - - - - - - - -︱max. turning speeds 7.000 U/min︱chucking diameter 130 mm︱weight ~ 4.600 kg︱Dimensions (L x W x H) 2.500 x 1.900 x 2.165 mm︱
          SPINNER TTC300 52 SMMCY The machine is in a good condition - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TTC300 | TTC300-52 | TTC 300-52
            max. swing dia. ~ 400 mm
            max. turning diameter ~ 200 mm
            Max. Turning length ~ 400 mm
            travel -x1 axis 180 mm
            travel -x2 axis 110 mm
            travel -z axis 450 mm
            control Fanuc 31i
            - - - turning spindle 1 - - - - - - - - -
            max. turning speeds 5.000 U/min.
            chucking diameter 210 mm
            spindle passage 42 mm
            - - - turning spindle 2 - - - - - - - - -
            max. turning speeds 7.000 U/min
            chucking diameter 130 mm
            weight ~ 4.600 kg
            Dimensions (L x W x H) 2.500 x 1.900 x 2.165 mm
            Description :
            SPINNER TTC300 52 SMMCY

            The machine is in a good condition

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: TTC300 | TTC300-52 | TTC 300-52
          Datasheet
          Request / Contact
          Centre de tournage et de fraisage CNC INDEX ABC 65


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40948 · CNC Turning- and Milling Center

          INDEX - ABC 65 - - 2014 - /

          Technical details
          turning diameter 65 mm︱turning length / mm︱control / ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 2 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 65 mm︱- bar diameter (max) 65 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 6000 /min︱- drive power 4.2 kW︱- spindle torque 10 Nm︱COUNTER SPINDLE ︱- spindle revolutions (max) 6000 /min︱- drive power S6 40% 20 kW︱- drive power S6 40% 27 kW︱- spindle torque S6 40% 105 Nm︱- spindle torque S1 100% 145 Nm︱
            turning diameter 65 mm
            turning length / mm
            control /
            - number of spindles 2
            - number of turrets 2
            - turning diameter (max) 65 mm
            - bar diameter (max) 65 mm
            - spindle revolutions (min) 6000 /min
            - drive power 4.2 kW
            - spindle torque 10 Nm
            - spindle revolutions (max) 6000 /min
            - drive power S6 40% 20 kW
            - drive power S6 40% 27 kW
            - spindle torque S6 40% 105 Nm
            - spindle torque S1 100% 145 Nm
          Datasheet
          Request / Contact
          Tours d'occasion Centre de tournage et fraisage CNC MAZAK INTEGREX i400


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18320 · CNC Turning- and Milling Center

          MAZAK - INTEGREX i400 - - 2014 - Mazatrol Matrix 2

          Technical details
          turning diameter 760 mm︱workpiece length - max. 1524 mm︱control Mazatrol Matrix 2 ︱swing diameter 760 mm︱clamping range for bar work 102 mm︱workpiece weight 1000 kg︱------------ MAIN SPINDLE ------------ ︱turning speeds 35 - 3300 U/min︱passage of spindle 112 mm︱c-axis 1 ︱spindle motor 30 kW︱travel -x axis 630 mm︱travel -y axis 230 mm︱travel -z axis 1585 mm︱rapid travel x/y/z 38000 x 26000x 38000 mm/min︱milling spindle ︱spindle motor 18,5 kW︱milling head speed 12000 U/min︱weight of the machine ca. 12,7 t︱dimensions of the machine ca. 4,9 x 2,4 x 2,8 m︱
          - CNC Control Mazatrol Matrix 2 - ATC 20-fold
            turning diameter 760 mm
            workpiece length - max. 1524 mm
            control Mazatrol Matrix 2
            swing diameter 760 mm
            clamping range for bar work 102 mm
            workpiece weight 1000 kg
            turning speeds 35 - 3300 U/min
            passage of spindle 112 mm
            c-axis 1
            spindle motor 30 kW
            travel -x axis 630 mm
            travel -y axis 230 mm
            travel -z axis 1585 mm
            rapid travel x/y/z 38000 x 26000x 38000 mm/min
            spindle motor 18,5 kW
            milling head speed 12000 U/min
            weight of the machine ca. 12,7 t
            dimensions of the machine ca. 4,9 x 2,4 x 2,8 m
            Description :

            - CNC Control Mazatrol Matrix 2
            - ATC 20-fold
          Datasheet
          Request / Contact
          Tours d'occasion Centre de tournage et fraisage CNC SOMAB DELTAMAB 700


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03108 · CNC Turning- and Milling Center

          SOMAB - DELTAMAB 700 - - 2013 - FAGOR 8055 TC

          Technical details
          turning diameter 700 mm︱turning length 2000 mm︱control FAGOR 8055 TC ︱turning dia. over face-slide 580 mm︱turning diameter over cross slideways 520 mm︱main drive motor kW︱spindle turning speed range 2 - 2400 U/min︱spindle passage 110 mm︱chucking diameter 400 mm︱taper in tailstock MT 5 ︱total power requirement 35 kW︱weight of the machine ca. 10.5 t︱dimensions of the machine ca. 5,3 x 1,9 x 1,8 m︱coolant JA
          Machine in inclined bed execution WITH FAGOR CNC CONTROL TC 8055 4 AXIS LATE WITH C AXIS AND Y AXIS LIVE TOOLS STEADY
            turning diameter 700 mm
            turning length 2000 mm
            control FAGOR 8055 TC
            turning dia. over face-slide 580 mm
            turning diameter over cross slid. 520 mm
            spindle turning speed range 2 - 2400 U/min
            spindle passage 110 mm
            chucking diameter 400 mm
            taper in tailstock MT 5
            total power requirement 35 kW
            weight of the machine ca. 10.5 t
            dimensions of the machine ca. 5,3 x 1,9 x 1,8 m
            coolant JA
            Description :
            Machine in inclined bed execution
            WITH FAGOR CNC CONTROL TC 8055
            4 AXIS LATE
            WITH C AXIS AND Y AXIS
            LIVE TOOLS
            STEADY
          Datasheet
          Request / Contact
          Tours d'occasion Centre de tournage et fraisage CNC DMG MORI SEIKI CTX 510 ecoline V3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8629 · CNC Turning- and Milling Center

          DMG MORI SEIKI - CTX 510 ecoline V3 - - 2013 - 840 D sl Siemens

          Technical details
          turning diameter max. 465 mm︱turning length 1.050 mm︱control 840 D sl Siemens︱swing diameter 680 mm︱Main spindle: ︱turning speed range - main spindle max. 3.250 min/-1︱power capacity - main spindel 33 kW︱max. Torque 630 Nm︱spindle nose 220h5 ︱chucking diameter 250 - max. 315 mm︱spindle bearing diameter 140 mm︱spindle bore 102,5 mm︱max. usable bar diameter 90 mm︱C-Axis 0,001 °︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 40 ︱Driven Tool Stations: ︱Number of driven toolspositions 12 pos.︱tool spindle speed range max. 4.000 min/-1︱
          CNC - Turning- and Millingcenter DMG MORI SEIKI - CTX 510 ecoline V3 - ca. 5.400 h Spindle-Hours! - Tool-Drive - ShopTurn
            turning diameter max. 465 mm
            turning length 1.050 mm
            control 840 D sl Siemens
            swing diameter 680 mm
            turning speed range - main spind. max. 3.250 min/-1
            power capacity - main spindel 33 kW
            max. Torque 630 Nm
            spindle nose 220h5
            chucking diameter 250 - max. 315 mm
            spindle bearing diameter 140 mm
            spindle bore 102,5 mm
            max. usable bar diameter 90 mm
            C-Axis 0,001 °
            number of toolpositions 12 pos.
            tool taper VDI 40
            Number of driven toolspositions 12 pos.
            tool spindle speed range max. 4.000 min/-1
            Description :
            CNC - Turning- and Millingcenter
            DMG MORI SEIKI - CTX 510 ecoline V3

            - ca. 5.400 h Spindle-Hours!
            - Tool-Drive
            - ShopTurn


          Datasheet
          Request / Contact
          Centre de tournage et de fraisage CNC d'occasion DMG MORI SEIKI NLX 2500 SY / 700


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8508 · CNC Turning- and Milling Center

          DMG MORI SEIKI - NLX 2500 SY / 700 - - 2013 - M 730 BM MAPPS IV

          Technical details
          turning diameter max. 366 mm︱turning length 705 mm︱control M 730 BM MAPPS IV︱greates pass round over bed 920 mm︱Swing dia. over traverse guideway 742 mm︱Main spindle: ︱turning speed range - main spindle 4.000 min/-1︱power capacity - main spindel 18,5 / 15 kW︱spindle nose JIS A-8 ︱spindle bearing diameter 140 mm︱spindle bore 91 mm︱max. usable bar diameter 80 mm︱Subspindel: ︱Spindle speed range subspindle 6.000 min/-1︱power capacity - Sub spindle 11 / 7,5 kW︱spindle nose JIS A-5 ︱spindle bearing diameter 85 mm︱spindle bore 43 mm︱max. usable bar diameter ( - ) mm︱axis stroke:
          CNC - Turning- and MillingCenter DMG MORI SEIKI - NLX 2500 SY / 700
            turning diameter max. 366 mm
            turning length 705 mm
            control M 730 BM MAPPS IV
            greates pass round over bed 920 mm
            Swing dia. over traverse guidewa. 742 mm
            turning speed range - main spind. 4.000 min/-1
            power capacity - main spindel 18,5 / 15 kW
            spindle nose JIS A-8
            spindle bearing diameter 140 mm
            spindle bore 91 mm
            max. usable bar diameter 80 mm
            Spindle speed range subspindle 6.000 min/-1
            power capacity - Sub spindle 11 / 7,5 kW
            spindle nose JIS A-5
            spindle bearing diameter 85 mm
            spindle bore 43 mm
            max. usable bar diameter ( - ) mm
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI SEIKI - NLX 2500 SY / 700

          Datasheet
          Request / Contact
          Tours d'occasion Centre de tournage et fraisage CNC MAZAK Hyper Quadrex 150MSY


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-J567 · CNC Turning- and Milling Center

          MAZAK - Hyper Quadrex 150MSY - - 2013 - Mazatrol Matrix II

          Technical details
          turning diameter 300 mm︱turning length 520 mm︱control Mazatrol Matrix II ︱swing diameter 320 mm︱spindle turning speed range 5000 + 6000 U/min︱weight of the machine ca. 9.6 t︱
          Sub-Spindle, 2x turrets, Y-axis, Bar loader LNS 2x Turret slides with 12 driven tools Bar loader LNS Diameter -52mm / Length -1000mm 2x Tool Eye 2x Measuring probes Renishaw 2x power chucks D-150mm 2x HAINBUCH collet chucks Several accessories More details on www.marcels-maschinen.ch
            turning diameter 300 mm
            turning length 520 mm
            control Mazatrol Matrix II
            swing diameter 320 mm
            spindle turning speed range 5000 + 6000 U/min
            weight of the machine ca. 9.6 t
            Description :
            Sub-Spindle, 2x turrets, Y-axis, Bar loader LNS

            2x Turret slides with 12 driven tools

            Bar loader LNS Diameter -52mm / Length -1000mm
            2x Tool Eye
            2x Measuring probes Renishaw
            2x power chucks D-150mm
            2x HAINBUCH collet chucks
            Several accessories

            More details on www.marcels-maschinen.ch


          Datasheet
          Request / Contact
          Tours et centres de fraisage CNC d'occasion EMCO Hyperturn 110 SM2Y


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17869 · CNC Turning- and Milling Center

          EMCO - Hyperturn 110 SM2Y - - 2013 - Siemens 840 D SL

          Technical details
          turning diameter 710 mm︱turning length 1700 mm︱control Siemens 840 D SL ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- number of turrets 2 ︱- live positions: yes ︱- number of c-axes ︱- number of y-axes 1 ︱WORKING RANGE TURNING ︱- swing diameter (max) 720 mm︱- turning diameter (max) 710 mm︱- worpiece length max. 1700 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 0 /min︱- spindle revolutions (max) 3000 /min︱spindle motor 52 kW︱COUNTER SPINDLE ︱- spindle revolutions (min) 0 /min︱- spindle revolutions (max) 2500 /min︱
          CNC turning centre for the complete machining of turned and milled parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes Unused machine!! - CNC control Sinumerik 840 Dsl - Main & counter spindle - 6 Linear axes - 2 x rotary axes - 2 tool turrets with: -- 12 driven tools (VDI 40) -- 10,5 KW - 3000 rpm - Y-axis - cooling unit - chip conveyor - belt filter system - extraction unit - glass scales
            turning diameter 710 mm
            turning length 1700 mm
            control Siemens 840 D SL
            - number of spindles 2
            - number of turrets 2
            - number of y-axes 1
            - swing diameter (max) 720 mm
            - turning diameter (max) 710 mm
            - worpiece length max. 1700 mm
            - spindle revolutions (max) 3000 /min
            spindle motor 52 kW
            - spindle revolutions (max) 2500 /min
            Description :
            CNC turning centre for the complete machining of turned and milled parts with
            2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes
            Unused machine!!

            - CNC control Sinumerik 840 Dsl
            - Main & counter spindle
            - 6 Linear axes
            - 2 x rotary axes
            - 2 tool turrets with:
            -- 12 driven tools (VDI 40)
            -- 10,5 KW - 3000 rpm
            - Y-axis
            - cooling unit
            - chip conveyor
            - belt filter system
            - extraction unit
            - glass scales

          Datasheet
          Request / Contact
          Tours et centres de fraisage CNC d'occasion MAZAK INTEGREX J 200


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40768 · CNC Turning- and Milling Center

          MAZAK - INTEGREX J 200 - - 2013 - MAZATROL MATRIX NEXUS 2

          Technical details
          turning diameter 500 mm︱turning length 500 mm︱control MAZATROL MATRIX NEXUS 2 ︱BASIC FUNCTIONS ︱- number of spindles 1 ︱- number of c-axes 1 ︱- number of y-axes 1 ︱- number of b-axes 1 ︱WORKING RANGE TURNING ︱- turning diameter (max) 500 mm︱- bar diameter (max) 51 mm︱- worpiece length max. 500 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 5000 /min︱- c-axis: yes ︱X/Z SLIDE ︱- Z-axis travel 550 mm︱- X-axis travel 450 mm︱- Y-axis travel 200 mm︱- - drive power 7.5 kW︱
            turning diameter 500 mm
            turning length 500 mm
            control MAZATROL MATRIX NEXUS 2
            - number of spindles 1
            - number of c-axes 1
            - number of y-axes 1
            - number of b-axes 1
            - turning diameter (max) 500 mm
            - bar diameter (max) 51 mm
            - worpiece length max. 500 mm
            - spindle revolutions (max) 5000 /min
            - Z-axis travel 550 mm
            - X-axis travel 450 mm
            - Y-axis travel 200 mm
            - - drive power 7.5 kW
          Datasheet
          Request / Contact
          Tours d'occasion Centre de tournage et fraisage CNC MORI SEIKI NTX 1000


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8651 · CNC Turning- and Milling Center

          MORI SEIKI - NTX 1000 - - 2013 - Sinumerik 840D sl Siemens

          Technical details
          turning diameter 370 mm︱turning length max. 450 mm︱control Sinumerik 840D sl Siemens︱swing diameter 370 mm︱Swing dia. over traverse guideway 370 mm︱spindle distance 870 mm︱Main spindle: ︱Max. rpm 6.000 min/-1︱power capacity - main spindel 11 / 7,5 kW︱max. Torque 220 / 150 Nm︱spindle bearing diameter 110 mm︱spindle bore 73 mm︱max. usable bar diameter 51 mm︱spindle nose A2-6 DIN 55026︱C-Axis 360 °︱Subspindel: ︱Max. rpm 6.000 min/-1︱power capacity - Sub spindle 7,5 / 5,5 kW︱max. Torque 30 / 22 Nm︱spindle bearing diameter 70 mm︱
          CNC - Turning- and MillingCenter MORI SEIKI - NTX 1000 - Main- and Subspindle - Turning-Millingspindle 20.000 1/min - Subspindle and Milling-Spindle swivable - turret below - Through-Hollow-Chuck 52mm - Sinumerik ShopTurn 3G
            turning diameter 370 mm
            turning length max. 450 mm
            control Sinumerik 840D sl Siemens
            swing diameter 370 mm
            Swing dia. over traverse guidewa. 370 mm
            spindle distance 870 mm
            Max. rpm 6.000 min/-1
            power capacity - main spindel 11 / 7,5 kW
            max. Torque 220 / 150 Nm
            spindle bearing diameter 110 mm
            spindle bore 73 mm
            max. usable bar diameter 51 mm
            spindle nose A2-6 DIN 55026
            C-Axis 360 °
            Max. rpm 6.000 min/-1
            power capacity - Sub spindle 7,5 / 5,5 kW
            max. Torque 30 / 22 Nm
            spindle bearing diameter 70 mm
            Description :
            CNC - Turning- and MillingCenter
            MORI SEIKI - NTX 1000

            - Main- and Subspindle
            - Turning-Millingspindle 20.000 1/min
            - Subspindle and Milling-Spindle swivable
            - turret below
            - Through-Hollow-Chuck 52mm

            - Sinumerik ShopTurn 3G

          Datasheet
          Request / Contact
          Tours d'occasion Centre de tournage et fraisage CNC MORI SEIKI MILL-TAP 700


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05127 · CNC Turning- and Milling Center

          MORI SEIKI - MILL-TAP 700 - - 2012 - Siemens Sinumerik 840D

          Technical details
          serial number 15995725924 ︱control Siemens Sinumerik 840D ︱travel -x axis 700 mm︱travel -y axis 420 mm︱travel -z axis 380 mm︱Axis 4 ︱turning speeds 20 - 10.000 U/min︱feed speeds x - y - z bis 60.000 mm/min︱tool change unit 25-fach ︱clamping table 400 x 800 mm︱ Lehmann EA-510LOSMA Darwin D600, bj. 06 ︱chip conveyor kW︱
            serial number 15995725924
            control Siemens Sinumerik 840D
            travel -x axis 700 mm
            travel -y axis 420 mm
            travel -z axis 380 mm
            Axis 4
            turning speeds 20 - 10.000 U/min
            feed speeds x - y - z bis 60.000 mm/min
            tool change unit 25-fach
            clamping table 400 x 800 mm
            Lehmann EA-510
            LOSMA Darwin D600, bj. 06
          Datasheet
          Request / Contact
          Centre de tournage et de fraisage CNC occasion DMG MORI SEIKI CTX 310 eco V3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8520 · CNC Turning- and Milling Center

          DMG MORI SEIKI - CTX 310 eco V3 - - 2012 - 840 D Siemens

          Technical details
          turning diameter max. 300 mm︱turning length 450 mm︱control 840 D Siemens︱centre height 190 mm︱standard turning dia. 200 mm︱turning diameter over bed 330 mm︱turning dia. over face-slide 260 mm︱Main spindle: ︱turning speed range - main spindle max. 5.000 min/-1︱power capacity - main spindel 16,5 / 11 kW︱max. Torque 166,5 Nm︱usable bar diameter 51 mm︱chucking diameter 210 mm︱C-Axis 0,04 °︱spindle nose 140h5 ︱axis stroke: ︱travel -x axis 160 mm︱travel -z axis 450 mm︱turret: ︱number of toolpositions 12 pos.︱
          CNC - Turning- and Millingcenter DMG MORI SEIKI - CTX 310 eco V3 - Operating-Hours: Power-On: ca. 3.500h / Spindle-Runtime: only ca. 1.400h - Tool-Drive - C-Axis
            turning diameter max. 300 mm
            turning length 450 mm
            control 840 D Siemens
            centre height 190 mm
            standard turning dia. 200 mm
            turning diameter over bed 330 mm
            turning dia. over face-slide 260 mm
            turning speed range - main spind. max. 5.000 min/-1
            power capacity - main spindel 16,5 / 11 kW
            max. Torque 166,5 Nm
            usable bar diameter 51 mm
            chucking diameter 210 mm
            C-Axis 0,04 °
            spindle nose 140h5
            travel -x axis 160 mm
            travel -z axis 450 mm
            number of toolpositions 12 pos.
            Description :
            CNC - Turning- and Millingcenter
            DMG MORI SEIKI - CTX 310 eco V3

            - Operating-Hours: Power-On: ca. 3.500h / Spindle-Runtime: only ca. 1.400h
            - Tool-Drive
            - C-Axis



          Datasheet
          Request / Contact
          Centre de tournage et de fraisage CNC d'occasion DMG MORI SEIKI NLX 2500 SY / 700


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8509 · CNC Turning- and Milling Center

          DMG MORI SEIKI - NLX 2500 SY / 700 - - 2012 - M 730 BM MAPPS IV

          Technical details
          turning diameter max. 366 mm︱turning length 705 mm︱control M 730 BM MAPPS IV︱greates pass round over bed 920 mm︱Swing dia. over traverse guideway 742 mm︱Main spindle: ︱turning speed range - main spindle 4.000 min/-1︱power capacity - main spindel 18,5 / 15 kW︱spindle nose JIS A-8 ︱spindle bearing diameter 140 mm︱spindle bore 91 mm︱max. usable bar diameter 80 mm︱Subspindel: ︱Spindle speed range subspindle 6.000 min/-1︱power capacity - Sub spindle 11 / 7,5 kW︱spindle nose JIS A2-5 ︱spindle bearing diameter 85 mm︱spindle bore 43 mm︱max. usable bar diameter ( - ) mm︱axis stroke:
          CNC - Turning- and MillingCenter DMG MORI SEIKI - NLX 2500 SY / 700
            turning diameter max. 366 mm
            turning length 705 mm
            control M 730 BM MAPPS IV
            greates pass round over bed 920 mm
            Swing dia. over traverse guidewa. 742 mm
            turning speed range - main spind. 4.000 min/-1
            power capacity - main spindel 18,5 / 15 kW
            spindle nose JIS A-8
            spindle bearing diameter 140 mm
            spindle bore 91 mm
            max. usable bar diameter 80 mm
            Spindle speed range subspindle 6.000 min/-1
            power capacity - Sub spindle 11 / 7,5 kW
            spindle nose JIS A2-5
            spindle bearing diameter 85 mm
            spindle bore 43 mm
            max. usable bar diameter ( - ) mm
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI SEIKI - NLX 2500 SY / 700

          Datasheet
          Request / Contact


          A CNC Turning and Milling Center from LagerMaschinen
          A CNC turning and milling center from LagerMaschinen - good for business

          A CNC turning and milling center from LagerMaschinen will certainly be a great advantage to your small or medium-sized business. Choose from a CNC turning and milling center that fits your needs exactly. A CNC turning and milling center uses either one of multiple axes to calibrate and work wood metal or other hard materials. When purchasing a CNC turning and milling center from LagerMaschinen you'll be able to ensure quality control as well as to speak directly with sellers. Let LagerMaschinen's qualified experts assist you in your search for your next business machine.

          CNC turning and milling center from LagerMaschinen

          A CNC turning and milling center (also known as a lathe) can be used for many different purposes. No matter what your end product a CNC turning and milling center from LagerMaschinen is just what you need. Used machines are more economically viable as well as kinder to the environment. A CNC turning and milling center from LagerMaschinen could be the logical solution for your production concerns. By purchasing your CNC turning and milling center through LagerMaschinen and its team of experts and professionals you'll not only find precisely what you're looking for but will also ensure that it lasts for a lifetime.

          CNC turning and milling center - the most logical choice

          No matter what type of CNC turning and milling center you're looking for LagerMaschinen has what you need. Log on create and account and start shopping at LagerMaschinen today.