Gear Testing Machine

max. wheel diameter 600 mm︱gear width 250 mm︱max. module 20 ︱min. module 0.75 ︱max.helical angle 0-90 °︱base circle dia. - max. 15-570 mm︱capacity 0.5 kW︱clamping length max. 665 mm︱total power requirement ca. 1,5 kW︱weight of the machine ca. 1 t︱Control GFM ZWMP-20e ︱

---

overhauled Masuring Unit modified for the "gray stain test" in oil research and also for measuring of straight and helical Spur Gears with - GFM ZMP-20e PC for Evaluation of the Measuring Data, incl Software, Monitor & Printer

max. wheel diameter 630 mm︱gear width 500 mm︱max. module 10 ︱min. module 0,5 ︱max.helical angle 0-90 °︱workpiece weight 100 kg︱centre height 20-1000 mm︱dai. of counterstay center 40 mm︱travel -x axis +/- 115 mm︱travel -y axis -15 bis +320 mm︱travel -z axis 500 mm︱base circle dia. - max. 620 mm︱Control Wenzel Win Geco CNC ︱electrics - voltage/frequency 380/50 V/Hz︱total power requirement 1,6 kVA︱weight of the machine ca. 1,2 t︱range L-W-H 3,4 x 3,2 x 2,5 mm︱

---

Gear Test Center completely overhauled and with latest control system and software -- Wenzel Win Geco CNC (4 axes) -- Renishaw SP 80H measuring head -- Renishaw measuring systems in X-Y-Z axis -- Heidenhain Exe102 for signal adjustment Turntable SIN/TTL -- Metrotek Software - T-Stylus software: definition of the probes - Software T-Cali: Calibration of the probes - Software T-Align: The eccentricity and tilt of the workpiece axis are determined with the T-Align software. - Software T-Gear for the measurement of: profile, flank, pitch and runout External and internal gears, evaluation of the measurement results according to DIN, AGMA, ISO, Measuring in metric or inch - further software available on request - Conversion is carried out to customer order - Pictures show a completely overhauled machine in new condition - Laser measurement after conversion with highest measuring accuracy - 12 months warranty

max. wheel diameter 250 mm︱gear width 400 mm︱max. module 15 ︱min. module 0.5 ︱Control Zeiss ︱measuring post 800 mm︱total power requirement 1,7 kW︱weight of the machine ca. 1.2 t︱

---

- Zeiss CNC Controller - klingelnberg software 2012 - calibration made this year 16/07/2019 valid until 07/2020 - measuring height 800 mm

max. wheel diameter 500 mm︱gear width 200 mm︱max. module 8 ︱min. module 1 ︱Control Fanuc ︱total power requirement 9 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 2 x 4 x 3 m︱

---

max. wheel diameter 20 - 1300 mm︱gear width 750 mm︱max. module 25 ︱min. module 1 ︱max.helical angle 0 - 90 °︱clamping length 75 - 1800 mm︱total power requirement 5 kW︱weight of the machine ca. 5,5 t︱

---

max. wheel diameter 1400 mm︱gear width 400 mm︱max. module 25 ︱min. module 1 ︱total power requirement - kW︱weight of the machine ca. 7,0 t︱dimensions of the machine ca. 3,0 x 1,2 x 3,2 m︱

---

max. wheel diameter 600 mm︱gear width 500 mm︱max. module 20 ︱min. module 0,5 ︱Control - ︱max. workpiece weight 450 kg︱pitch angle 0-90 °︱total power requirement ca. 4 KVA︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱

---

max. wheel diameter 20 - 2650 mm︱gear width - mm︱max. module 32 ︱distance between centres 1850 ︱workpiece weight max. 10.000 kg︱table diameter 1100 mm︱

---

Machine can be inspected under power. Setting-up and installation at the customers' is possible against extra charges. Equipment / Accessories: - clamping table diameter 1100 mm - steady rest - clamping devices - carriers - levelling shoes - hardware updated to Windows 7 - gears / straight and helical - internal and external gears - measuring of tool cutters (grinding wheels, shaving cutters, milling cutters)

max. wheel diameter 2600 mm︱gear width 1000 mm︱max. module 32 ︱min. module 1 ︱min. wheel diameter 5 mm︱max. helix angle 90 °︱workpiece weight 10 t︱gear hobbing diameter - internal 20 mm︱travel -x axis 320 mm︱travel -y axis 1330 mm︱travel -z axis 1000 mm︱V-axis 75 mm︱dist. between centers 1900 mm︱Control Hoefler/IBH CNC ︱total power requirement 0 kW︱weight of the machine ca. 0 t︱dimensions of the machine ca. 4,2 x 3,6 x 3,6 m︱

---

GEAR Checker - CNC control from Hoefler Software version on the Hoefler CNC control is: V3.3 Measuring software version is: 10/89 (see photo from manual). Measuring Options available are: • Pitch (left & right) • Runout • Profile • Lead (Helix) • Diagnostic software included

max. wheel diameter 400 mm︱gear width 500 mm︱max. module 15 ︱min. module 0,5 ︱total power requirement 2,5 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. m︱

---

H O E F L E R (Germany) CNC Controlled 4 Axis Inspection Centre for Gears Model EMZ 400 Year 1988 Serial No. 067 047 ____________________________________________________ Working range: Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm Module range 0.5 – 15 Gear width, max. 500 mm Travel of measuring head, approx. +/- 180 mm Helix angle 0 – 60 ° Max. weight of workpiece, approx. 250 kg Distance between centres, approx. 1,000 mm Distance between centre and body of counter steady 205 mm Table Ø, approx. 290 mm Plotter diagram scales 50 / 100 / 500 / 1000 / 200 : 1 Total electrical load, approx. 1.5 kW - 380 V - 50 Hz Weight 2,000 kg Machine is suitable for measuring: Profile and flank lines on a chosen number of teeth on the gear circumference, as well as tooth pitch and runout tests of gears with straight and helical teeth. Accessories / Special Features ? HOEFLER CNC Measuring Control in 4 axes, with monitor and input terminal, for automatic measuring of various gear profiles on known and unknown (with regard to profile) workpieces. ? X = tangential adjustment of measuring head (cross). ? Y = Radial adjustment of complete measuring slide (250 mm) ? Z = Vertical travel of measuring slide. ? C = Table rotation. ? Automatic feed-in of 3-D measuring probe into the base circle and into tooth gap. ? Automatic evaluation of measuring results according to DIN or AGMA. Printing of results, via plotter or a printer. ? Separate HP Workstation, Model 382, the operator carries on a dialog with the computer during the Measuring process via keyboard. The CNC control of the machine is only needed for installation and Maintenance. ? Flexible hand-held control unit allows manual control of the axes for quick feed or creep feed. Inside the system we have a measuring software available which is developed for the MERCEDES BENZ Company, however all standard gears can be measured with this software. The Machine was recently checked through by a HÖFLER Specialist Condition : Very good – machine can inspected under power by appointment Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

max. wheel diameter 1600 mm︱gear width 250 mm︱max. module 20 ︱min. module 1,5 ︱base circle dia. - max. 1450 mm︱base circle dia. - min. 150 mm︱specimen weight from/to 4000 kg︱feeler adjustment movement - parallel 1400 mm︱max.helical angle 0 - 90 °︱wheel diameter with counterstay 1000 mm︱feeler adjustment movement - parallel 800 mm︱centre height 1150 mm︱electrics - voltage/frequency 400 / 50 V/Hz︱dimensions of the machine ca. 2,8 x 2,4 x 2,3 m︱total power requirement 2 kW︱weight of the machine ca. 3 t︱

---

Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle; Profile corrections; Helix angles and leads; Lines of contact; Surface roughness; Concentricity of teeth; Tooth to tooth pitch error; Tooth thickness and tooth width over several teeth, Lots of other measuring possibilities. Accesories / Special Features: + Optical setting of base circle and optical angle settings without the use of base circle plates + Heavy workpieces can be tested on the machine. Motor-driven testing process, or manual control using hand wheels. + Auxiliary rotary table, dia. 480 mm, for mounting larger gears, with 2 sets of extending supports 400 and 470 mm long + Counter bracket Model AV 17 with maximum mounting length of 1150 mm + Separate electric cabinet for controlling manual movements, in conjunction with... + GFM Computer, Model ZMP 20 e with software for automatic dressing of gears,for the production of modern measuring printouts with graphics. The graphics are also displayed on a monitor. Various sub-programs and HP printer + Varous probe inserts and small parts, as well as a height adjustable holder for an indexing device, mounted on the back of the machine (but without the indexing device) Levelling feet in very good working condition - Machine can be inspected under power - Serial-Number B 2281

max. wheel diameter 1200 mm︱gear width 300 mm︱max. module 20 ︱min. module 0,7 ︱base circle dia. - max. 1150 mm︱base circle dia. - min. 150 mm︱specimen weight from/to 1500 kg︱feeler adjustment movement - parallel 1100 mm︱max.helical angle 0 - 90 °︱wheel diameter with counterstay 900 mm︱feeler adjustment movement - parallel 600 mm︱centre height 1450 mm︱electrics - voltage/frequency 400 / 50 V/Hz︱dimensions of the machine ca. 2,8 x 2,4 x 2,3 m︱total power requirement 1,7 kW︱weight of the machine ca. 2,5 t︱

---

Universal Involute and Helix Testing Machine. Machine is suitable for measuring all individual tooth data on straight and helical spur gears in 2001: new Measuring Copmputer GFM ZMP-20e with Software (V19.01 english) and HP plotter and printer, model 9836 - outer steady type Av 27 (1.450 mm centre height) - Table (E21) - orifice bearing (E20) - leveler device (E22) - Pitch testing device - electron. Makro- & Mikro-Measuring probe - spare parts Serial-Number B 3735

max. wheel diameter 640 mm︱gear width 250 mm︱max. module 20 ︱min. module 0.1 ︱max.helical angle 0-90 °︱checking wheel weight - max. 800 kg︱stroke of measurement slide 165 mm︱Daylight between 800 mm︱Center of spindle to wall or column 340 mm︱Control GFM ZMP 20e ︱weight of the machine ca. 1.8 t︱dimensions of the machine ca. 3.5x1.8 m︱

---

In addition to the pure measured value acquisition and measured value display, the machine offers also a fully automatic evaluation of edge shape and flankdirection for External and internal gears equipped with: - Gear measuring processor ZMP 20e with software, keyboard, TFT screen - Laserprinter HP 3005 - Pick-up tip with driver, cyl. measuring mandrel Optionally available for a surcharge: Höfler Splitting Tester TP, with GfM control unit

max. wheel diameter 2500 mm︱gear width 0 mm︱max. module 34 ︱min. module 1 ︱total power requirement ca. 15 kW︱weight of the machine ca. 15 t︱dimensions of the machine ca. 4,20 x 2,00 x 2,90 m︱

---

Extra große ZR-Prüfmaschine, Gegenhalter

max. wheel diameter 400 mm︱gear width NA mm︱max. module 5 ︱min. module ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Manual Two Flank Gear Tester

max. wheel diameter 650 mm︱gear width 150 mm︱max. module 20 ︱min. module 1 ︱working area mm︱Number of axles St.︱total power requirement 1 kW︱weight of the machine ca. 1500 kg︱dimensions of the machine ca. m︱

---

M A A G (Switzerland) Universal Gear Tester with optical base circle setting Model SP 60 Year 1978 Ser.-Nr. 400 842 ____________________________________________________ Working range: Adjustable base circle Ø 25 – 600 mm Gear Ø, external 650 mm Module range 1 – 20 Stroke of measuring slide, face width 200 mm Gear width acc. to Helix angle 75 -150 mm Helix angle 0 – 60 ° Max. weight of workpiece 50 kg Distance between centres in counter steady 100 – 650 mm Total electrical load 1 kW - 380 V - 50 Hz Weight 1,500 kg Machine is suitable for testing: Tooth profile (involute) Tooth direction (helix angle) Concentricity, using a dial gage Accessories / Special Features This unit does not require base circle disks! ? Counter bracket for workpiece holding, model SPA-F-65/75, with 650 mm distance between centres. ? MAAG Electronic Probe and Evaluation Device Model ERS 411 with recording device and digital display devices for the adjustment of probehead and the stylus deflection. Two presettable counters for Diagram marks. ? Infinitely variable workpiece speeds. Magnifications250/500/1000/2000 ? Workpiece mandrels and drivers. ? Various operating tools. Condition : Good to very good - can be inspected under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

max. wheel diameter 160 - 1.600 mm︱gear width 250 mm︱max. module 20 ︱min. module 1,5 ︱total power requirement 1 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. m︱

---

max. wheel diameter 1200 mm︱gear width 300 mm︱max. module 20 mm︱min. module 0,7 mm︱total power requirement 1,7 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2,8 x 2,4 x 2,3 m︱

---

Base circle diameter max. 1150 mm Base circle diameter min. 150 mm Test specimens - weight from / to 1500 kg Probe adjustment range - parallel to the axis 1100 mm Helix angle - max. 0-90 ° Wheel diameter - with counterholder 900 mm Probe adjustment range - parallel to the axis 600 mm Center height 1450 mm elec. Version - Voltage / Frequency 400/50 V / Hz The machine is available now. *** Changes and errors in the technical data and specifications as well Subject to prior sale!***

max. wheel diameter 120 mm︱gear width 160 mm︱max. module 3 ︱min. module ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Two Flank Gear Tester

max. wheel diameter NA mm︱gear width NA mm︱max. module ︱min. module ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Manually operated 2-Flank Gear Tester

max. wheel diameter 450 mm︱gear width 400 mm︱max. module 20 ︱min. module 0,2 ︱total power requirement kW︱weight of the machine ca. 0,1 t︱dimensions of the machine ca. 0,7 x 0,3 x 0,6 m︱

---

max. wheel diameter 450 mm︱gear width 400 mm︱max. module 20 ︱min. module 0,2 ︱total power requirement kW︱weight of the machine ca. 0,1 t︱dimensions of the machine ca. 0,7 x 0,3 x 0,6 m︱

---

max. wheel diameter 600 mm︱gear width 150 mm︱max. module 15 ︱min. module 1 ︱clamping length min. 45 mm︱clamping length max. 750 mm︱workpiece weight 150 kg︱total power requirement kW︱weight of the machine ca. 0,55 t︱dimensions of the machine ca. 1,2x0,8x1,95 m︱

---

max. wheel diameter 0 mm︱gear width 0 mm︱max. module 40 ︱min. module 1 ︱weight of the machine ca. 0,05 t︱dimensions of the machine ca. 0,5x0,3x0,3 m︱

---

pitch and run-out tester unit for gear measuring machines.