Réseau européen de revendeurs de machines de stockage

Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Machining Center - Vertical

          Machinelist: Machining Center - Vertical


          Machining Center - Vertical

          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical ZPS 2080


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021020 · Machining Center - Vertical

          ZPS - 2080 - - unbekannt - Heidenhain 426

          Technical details
          x-travel 2000 mm︱y-travel 802 mm︱z-travel 680 mm︱Control Heidenhain 426 ︱main spindle: ︱turning speeds 6000 U/min︱spindle motor 500 Nm︱number of tool places 16 Pos.︱tool taper SK 50 ︱table: ︱table-size 2100 x 800 mm︱
          The machine can be viewed under power and ours Estimated in a technically very good condition. technical features: - ILZ *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            x-travel 2000 mm
            y-travel 802 mm
            z-travel 680 mm
            Control Heidenhain 426
            turning speeds 6000 U/min
            spindle motor 500 Nm
            number of tool places 16 Pos.
            tool taper SK 50
            table-size 2100 x 800 mm
            Description :
            The machine can be viewed under power and ours
            Estimated in a technically very good condition.

            technical features:

            - ILZ

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical OKUMA MC 5 VA


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021010 · Machining Center - Vertical

          OKUMA - MC 5 VA - - ca 1990 - OSP 5020

          Technical details
          x-travel 1050 mm︱y-travel 510 mm︱z-travel 6501 mm︱Control OSP 5020 ︱spindle tunring speed 4000 U/min︱table-size 1550 x 650 mm︱Number of working hours 15770 h︱spindle cone 50 ISO ︱number of tool places 20 Pos.︱tool taper BT 50
          The machine is in very good condition and can be viewed under power after appointment. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 1050 mm
            y-travel 510 mm
            z-travel 6501 mm
            Control OSP 5020
            spindle tunring speed 4000 U/min
            table-size 1550 x 650 mm
            Number of working hours 15770 h
            spindle cone 50 ISO
            number of tool places 20 Pos.
            tool taper BT 50
            Description :
            The machine is in very good condition and can be viewed under power after
            appointment.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical OPTIMUM OPTImill F 150 HSC


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8704 · Machining Center - Vertical

          OPTIMUM - OPTImill F 150 HSC - - 2020 - Sinumerik 828D Siemens

          Technical details
          x-travel 760 mm︱y-travel 440 mm︱z-travel 460 mm︱Control Sinumerik 828D Siemens︱Main spindle: ︱turning speed range - main spindle 12 - 12.000 min/-1︱power capacity - main spindel 21,2 / 9 kW︱max. Torque 135 / 57 Nm︱tool taper SK 40 DIN 69871︱work table: ︱table surface area 900 x 410 mm︱max. table load 350 kg︱T-slots 4x 16 x 102 mm︱distance spindle /table 102 - 562 mm︱Tool-Presetter: ︱number of toolpositions 24 pos.︱tool taper SK 40 ︱max. tool diameter 80 mm︱max. tool weight 8,0 kg︱change-time tool to tool 2,0 sec︱
          CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 150 HSC - NEW MACHINE / SHOW-ROOM-MACHINE - Inline-Spindle 12.000 min/-1 - 3D-Printing-Head incl. Heating-Plate 600x245mm - alternative configuration available, optional and on request !
            x-travel 760 mm
            y-travel 440 mm
            z-travel 460 mm
            Control Sinumerik 828D Siemens
            turning speed range - main spind. 12 - 12.000 min/-1
            power capacity - main spindel 21,2 / 9 kW
            max. Torque 135 / 57 Nm
            tool taper SK 40 DIN 69871
            table surface area 900 x 410 mm
            max. table load 350 kg
            T-slots 4x 16 x 102 mm
            distance spindle /table 102 - 562 mm
            number of toolpositions 24 pos.
            tool taper SK 40
            max. tool diameter 80 mm
            max. tool weight 8,0 kg
            change-time tool to tool 2,0 sec
            Description :
            CNC-MachiningCenter Vertical
            OPTIMUM - OPTImill F 150 HSC

            - NEW MACHINE / SHOW-ROOM-MACHINE
            - Inline-Spindle 12.000 min/-1
            - 3D-Printing-Head incl. Heating-Plate 600x245mm

            - alternative configuration available, optional and on request !
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical OPTIMUM OPTImill F 105 CNC


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8705 · Machining Center - Vertical

          OPTIMUM - OPTImill F 105 CNC - - 2020 - Sinumerik 808D adv. Siemens

          Technical details
          x-travel 550 mm︱y-travel 305 mm︱z-travel 460 mm︱Control Sinumerik 808D adv. Siemens︱Main spindle: ︱turning speed range - main spindle 10 - 10.000 min/-1︱power capacity - main spindel 11 / 7,5 kW︱max. Torque 70 / 48 Nm︱tool taper BT 40 ︱work table: ︱table surface area 800 x 320 mm︱max. table load 300 kg︱T-slots 3x 14 x 100 mm︱distance spindle /table 100 - 600 mm︱Tool-Presetter: ︱number of toolpositions 12 pos.︱tool taper BT 40 ︱max. tool diameter 70 mm︱max. tool weight 6,0 kg︱change-time tool to tool 7,0 sec︱
          CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 105 CNC - NEW MACHINE / SHOW-ROOM-MACHINE - alternative configuration available, optional and on request !
            x-travel 550 mm
            y-travel 305 mm
            z-travel 460 mm
            Control Sinumerik 808D adv. Siemens
            turning speed range - main spind. 10 - 10.000 min/-1
            power capacity - main spindel 11 / 7,5 kW
            max. Torque 70 / 48 Nm
            tool taper BT 40
            table surface area 800 x 320 mm
            max. table load 300 kg
            T-slots 3x 14 x 100 mm
            distance spindle /table 100 - 600 mm
            number of toolpositions 12 pos.
            tool taper BT 40
            max. tool diameter 70 mm
            max. tool weight 6,0 kg
            change-time tool to tool 7,0 sec
            Description :
            CNC-MachiningCenter Vertical
            OPTIMUM - OPTImill F 105 CNC

            - NEW MACHINE / SHOW-ROOM-MACHINE

            - alternative configuration available, optional and on request !
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical OPTIMUM OPTImill F 310 HSC


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8706 · Machining Center - Vertical

          OPTIMUM - OPTImill F 310 HSC - - 2020 - Sinumerik 828D Siemens

          Technical details
          x-travel 1.050 mm︱y-travel 600 mm︱z-travel 600 mm︱Control Sinumerik 828D Siemens︱Main spindle: ︱turning speed range - main spindle 10 - 10.000 min/-1︱power capacity - main spindel 31,4 / 11 kW︱max. Torque 200 / 70 Nm︱tool taper SK 40 DIN 69871︱work table: ︱table surface area 1.200 x 600 mm︱max. table load 800 kg︱T-slots 6x 16 x 100 mm︱distance spindle /table 100 - 750 mm︱Tool-Presetter: ︱number of toolpositions 30 pos.︱tool taper SK 40 ︱max. tool diameter 80 / (125) mm︱max. tool length 300 mm︱max. tool weight 8,0 kg︱
          CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 310 HSC - NEW MACHINE / SHOW-ROOM-MACHINE - alternative configuration available, optional and on request !
            x-travel 1.050 mm
            y-travel 600 mm
            z-travel 600 mm
            Control Sinumerik 828D Siemens
            turning speed range - main spind. 10 - 10.000 min/-1
            power capacity - main spindel 31,4 / 11 kW
            max. Torque 200 / 70 Nm
            tool taper SK 40 DIN 69871
            table surface area 1.200 x 600 mm
            max. table load 800 kg
            T-slots 6x 16 x 100 mm
            distance spindle /table 100 - 750 mm
            number of toolpositions 30 pos.
            tool taper SK 40
            max. tool diameter 80 / (125) mm
            max. tool length 300 mm
            max. tool weight 8,0 kg
            Description :
            CNC-MachiningCenter Vertical
            OPTIMUM - OPTImill F 310 HSC

            - NEW MACHINE / SHOW-ROOM-MACHINE

            - alternative configuration available, optional and on request !
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DMG MORI CMX 800 V


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41769 · Machining Center - Vertical

          DMG MORI - CMX 800 V - - 2019 - SIEMENS 840 D SLIMLINE

          Technical details
          x travel 800 mm︱y travel 560 mm︱z travel 510 mm︱-------------------------------------------------- ︱BASIC DESIGN ︱- basic design: bed type ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 3 ︱- X-axis travel 800 mm︱- Y-axis travel 560 mm︱- Z-axis travel 510 mm︱TABLE ︱- table surface (left-right) 1100 mm︱- table surface (front-back) 560 mm︱- workpiece load (max) 800 kg︱MILLING SPINDLE / HEAD ︱- spindle type: vertical ︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 12000 /min︱- tool fixture: ISO SK 40
          2 pieces 3-jaw chuck mounted on machine table Tool measurement OTS NC dividing head EA-510.L-M1 Belt filter system with 600 ltr tank Oil/emulsion separator FX 4002 Workpiece automation system HEITEC WH15-S workpiece loading and unloading system with 6-axis industrial robot KUKA Cybertech KR22 R1610, load capacity 15 kg 6 workpiece carrier drawers, usable volume 800x600x120 mm, load 150 kg per drawer Inspection station for quality control Integrated control panel with touch input Customizable area monitoring (safety laser scanner) to secure the opening / closing process of the drawers. As good as new: 2024 h spindle on, 133 h programme operation
            x travel 800 mm
            y travel 560 mm
            z travel 510 mm
            - basic design: bed type
            - number of processing axes (exc. 3
            - X-axis travel 800 mm
            - Y-axis travel 560 mm
            - Z-axis travel 510 mm
            - table surface (left-right) 1100 mm
            - table surface (front-back) 560 mm
            - workpiece load (max) 800 kg
            - spindle type: vertical
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 12000 /min
            - tool fixture: ISO SK 40
            Description :
            2 pieces 3-jaw chuck mounted on machine table
            Tool measurement OTS
            NC dividing head EA-510.L-M1
            Belt filter system with 600 ltr tank
            Oil/emulsion separator FX 4002

            Workpiece automation system HEITEC WH15-S
            workpiece loading and unloading system with 6-axis industrial
            robot KUKA Cybertech KR22 R1610, load capacity 15 kg
            6 workpiece carrier drawers, usable volume 800x600x120 mm, load 150 kg per drawer
            Inspection station for quality control
            Integrated control panel with touch input
            Customizable area monitoring (safety laser scanner) to secure the opening / closing
            process of the drawers.

            As good as new: 2024 h spindle on, 133 h programme operation
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical CHIRON DZ 15 W


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41834 · Machining Center - Vertical

          CHIRON - DZ 15 W - - 2019 - SIEMENS 840 D SOLUTIONLINE

          Technical details
          x travel 400 mm︱y travel 400 mm︱z travel 425 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- X-axis travel 400 mm︱- Y-axis travel 400 mm︱- Z-axis travel 425 mm︱- distance spindle nose - table surface (max.) 665 mm︱TABLE ︱- table surface (left-right) 940 mm︱- table surface (front-back) 470 mm︱- workpiece load (max) 400 kg︱MILLING SPINDLE / HEAD ︱- spindle revolutions (max) 12000 /min︱- drive power S1 100% 9.3 kW︱- spindle torque 95 Nm︱- tool fixture: ISO SK 40 ︱MILLING SPINDLE / HEAD ︱- spindle revolutions (max) 12000 /min︱
          Double-spindle machining centre with spindle distance 320 m + Chip conveyor KNOLL 600 K-1/200, ejection height 1050 mm + Coolant system 900 ltr with belt filter BÜRENER, high pressure pump 30 bar + Exhaust air cleaning system with fine filtration 1 micron + 4 chucks + RENISHAW workpiece measurement + tool breakage monitoring system (laser) Machine was intended for relocation to another factory of the owner, but is now being sold. Therefore the machine is already packed seaworthy. An inspection report from the manufacturer and the Chinese import authorities (CCIC) is available. Original price: 357000 EUR
            x travel 400 mm
            y travel 400 mm
            z travel 425 mm
            - X-axis travel 400 mm
            - Y-axis travel 400 mm
            - Z-axis travel 425 mm
            - distance spindle nose - table . 665 mm
            - table surface (left-right) 940 mm
            - table surface (front-back) 470 mm
            - workpiece load (max) 400 kg
            - spindle revolutions (max) 12000 /min
            - drive power S1 100% 9.3 kW
            - spindle torque 95 Nm
            - tool fixture: ISO SK 40
            - spindle revolutions (max) 12000 /min
            Description :
            Double-spindle machining centre with spindle distance 320 m
            + Chip conveyor KNOLL 600 K-1/200, ejection height 1050 mm
            + Coolant system 900 ltr with belt filter BÜRENER, high pressure pump 30 bar
            + Exhaust air cleaning system with fine filtration 1 micron
            + 4 chucks
            + RENISHAW workpiece measurement
            + tool breakage monitoring system (laser)

            Machine was intended for relocation to another factory of the owner, but is now being sold.
            Therefore the machine is already packed seaworthy.
            An inspection report from the manufacturer and the Chinese import authorities (CCIC) is
            available.

            Original price: 357000 EUR
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical Style  MC1000


          • Meister Maschinen
          • Overhagener Weg 44
          • 59597 Erwitte
          • Deutschland

          • +49 (0) 2943-870946
            +49 (0) 2943-870885
          • info@meister-maschinen.com
            www.meister-maschinen.com
          #2005-102005 · Machining Center - Vertical

          Style - MC1000 - - 2019 - Style

          Technical details
          x-travel 1000 mm︱y-travel 560 mm︱z-travel 590 mm︱total power requirement kW︱weight of the machine ca. 4000 t︱required space m︱
            x-travel 1000 mm
            y-travel 560 mm
            z-travel 590 mm
            weight of the machine ca. 4000 t
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DMG MORI CMX 1100 V


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02845 · Machining Center - Vertical

          DMG MORI - CMX 1100 V - - 2018 - FANUC Oi MF

          Technical details
          x-travel 1100 mm︱y-travel 560 mm︱z-travel 510 mm︱control FANUC Oi MF ︱Main spindle: ︱turning speed range - main spindle 20 - 12.000 min/-1︱power capacity - main spindel 13 / 9 kW︱tool taper SK 40 ︱max. Torque 82 / 54 Nm︱tension force 8 kN︱work table: ︱table surface area 1.400 x 560 mm︱max. table load 1000 kg︱table height over floor 850 mm︱distance spindle nose and table 120 - 630 mm︱Tool-Presetter: ︱number of toolpositions 30 pos.︱Max. mould width 80 / (125) mm︱max. tool length 300 mm︱max. tool weight 8 kg︱
          CNC - MachiningCenter Vertical DMG MORI - CMX 1100 V FROM 2018 CNC FANUC Oi MF - without clamping-system
            x-travel 1100 mm
            y-travel 560 mm
            z-travel 510 mm
            control FANUC Oi MF
            turning speed range - main spind. 20 - 12.000 min/-1
            power capacity - main spindel 13 / 9 kW
            tool taper SK 40
            max. Torque 82 / 54 Nm
            tension force 8 kN
            table surface area 1.400 x 560 mm
            max. table load 1000 kg
            table height over floor 850 mm
            distance spindle nose and table 120 - 630 mm
            number of toolpositions 30 pos.
            Max. mould width 80 / (125) mm
            max. tool length 300 mm
            max. tool weight 8 kg
            Description :
            CNC - MachiningCenter Vertical
            DMG MORI - CMX 1100 V FROM 2018
            CNC FANUC Oi MF

            - without clamping-system

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DMG MORI SEIKI DMC 635 V eco (177U)


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8301 · Machining Center - Vertical

          DMG MORI SEIKI - DMC 635 V eco (177U) - - 2018 - 840D sl ShopMill Siemens

          Technical details
          x-travel 635 mm︱y-travel 510 mm︱z-travel 460 mm︱control 840D sl ShopMill Siemens︱Main spindle: ︱turning speed range - main spindle 20 - 12.000 min/-1︱power capacity - main spindel 13 / 9 kW︱tool taper SK 40 DIN 69871︱max. Torque 83 / 57 Nm︱work table: ︱table surface area 790 x 560 mm︱number of T-slots 4 + 1 ︱T-slot - distance 100 mm︱T-slot - width 4x 14H12 / 1x 14H7 mm︱max. table load 600 kg︱Tool-Presetter: ︱number of toolpositions 20 pos.︱Max. mould width 80 / (130) mm︱max. tool length 300 mm︱max. tool weight 6 kg︱
          CNC - MachiningCenter Vertical DMG MORI - DMC 635 V ecoline - Top-Condition, original packed - only few operating-hours, nearly unused - (catalogue-picture shows comparable machine)
            x-travel 635 mm
            y-travel 510 mm
            z-travel 460 mm
            control 840D sl ShopMill Siemens
            turning speed range - main spind. 20 - 12.000 min/-1
            power capacity - main spindel 13 / 9 kW
            tool taper SK 40 DIN 69871
            max. Torque 83 / 57 Nm
            table surface area 790 x 560 mm
            number of T-slots 4 + 1
            T-slot - distance 100 mm
            T-slot - width 4x 14H12 / 1x 14H7 mm
            max. table load 600 kg
            number of toolpositions 20 pos.
            Max. mould width 80 / (130) mm
            max. tool length 300 mm
            max. tool weight 6 kg
            Description :
            CNC - MachiningCenter Vertical
            DMG MORI - DMC 635 V ecoline

            - Top-Condition, original packed
            - only few operating-hours, nearly unused
            - (catalogue-picture shows comparable machine)
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DECKEL-MAHO DMC 1150


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02740 · Machining Center - Vertical

          DECKEL-MAHO - DMC 1150 - - 2017 - SIEMENS 840 SLIM PANEL

          Technical details
          feeds - fine adjustment 42000 mm/min︱rapid motion -longitudinal/cross/vertical 42 m/min︱working area ︱control SIEMENS 840 SLIM PANEL ︱travel -x axis 1150 mm︱travel -y axis 700 mm︱travel -z axis 550 mm︱Tool changer 30 FACH .︱application Vertikal .︱Type of magazin Rad / Round ︱tool numbers 30 ︱max. tool length 250 mm︱max. tool diameter 80 mm︱max. tool-dia with free toolbox 130 mm︱Clampingsystem DIN 69872 .︱dimensions of the machine ca. 3,82 x 3,21 x 2,70 m︱weight of the machine ca. 7 t︱Kind of drive AC ︱power capacity at 100 % load 20 kW︱power capacity - milling spindle 40% ED = 13 kW︱
          Machining Center - Vertical DECKEL-MAHO DMC 1035 V ONLY 950 HOURS Equipment Electronic handwheel Manual movement of individual axes in various increments Half cabin with sliding door Half cabin Direct measuring system X,Y,Z Direct measuring system X,Y,Z inclusive Air purge for measuring system Chip Removal Package Chip Removal Package contents: Chip conveyor (scraper type) discharge height: 950 mm / 37,40 inch Tank capacity: 200 l / 52,83 US gallons Coolant spray gun for swarf removal COOLING TROUGHT THE SPINDEL 12 BARS RENISAW OMP 40-2 Signal lamp 4-colour standard Coolant-air blast-over Coolant - Air-blast changeover external switchable via M-Function Sandvik-Toolkit for DMC 635V/1035V eco with SK 40 Tool package Sandvik-Toolkit for DMC 635V/1035V eco with tool clamping SK 40
            feeds - fine adjustment 42000 mm/min
            rapid motion -longitudinal/cross. 42 m/min
            control SIEMENS 840 SLIM PANEL
            travel -x axis 1150 mm
            travel -y axis 700 mm
            travel -z axis 550 mm
            Tool changer 30 FACH .
            application Vertikal .
            Type of magazin Rad / Round
            tool numbers 30
            max. tool length 250 mm
            max. tool diameter 80 mm
            max. tool-dia with free toolbox 130 mm
            Clampingsystem DIN 69872 .
            dimensions of the machine ca. 3,82 x 3,21 x 2,70 m
            weight of the machine ca. 7 t
            Kind of drive AC
            power capacity at 100 % load 20 kW
            power capacity - milling spindle 40% ED = 13 kW
            Description :
            Machining Center - Vertical
            DECKEL-MAHO DMC 1035 V
            ONLY 950 HOURS

            Equipment
            Electronic handwheel
            Manual movement of individual axes in various increments
            Half cabin with sliding door
            Half cabin
            Direct measuring system X,Y,Z
            Direct measuring system X,Y,Z inclusive Air purge for measuring system
            Chip Removal Package
            Chip Removal Package contents: Chip conveyor (scraper type) discharge height: 950 mm / 37,40 inch Tank capacity: 200 l / 52,83 US gallons Coolant spray gun for swarf removal COOLING TROUGHT THE SPINDEL 12 BARS
            RENISAW OMP 40-2
            Signal lamp 4-colour standard
            Coolant-air blast-over
            Coolant - Air-blast changeover external switchable via M-Function
            Sandvik-Toolkit for DMC 635V/1035V eco with SK 40
            Tool package Sandvik-Toolkit for DMC 635V/1035V eco with tool clamping SK 40
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical POS PosMill CE1000


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-52754 · Machining Center - Vertical

          POS - PosMill CE1000 - - 2016 - iTNC530

          Technical details
          x-travel 1000 mm︱y-travel 600 mm︱z-travel 600 mm︱Control iTNC530 ︱table surface area 1200 x 600 mm︱table load 0,75 t︱tool taper SK40 ︱spindle turning speed - stepless 1 - 10000 U/min︱feed X/Y/Z/-axis 1 - 10000 mm/min︱rapid traverse X/Y/Z 32,00 m/min︱tool length - max. 340 mm︱tool diameter 120 mm︱total power requirement 27,00 kW︱weight of the machine ca. 8,50 t︱dimensions of the machine ca. 5,50 x 3,50 x H3,50 m︱
          Vertical Machining Center with HEIDENHAIN iTNC530 control, chip-convejor, coolant-unit, coolant/air through the spindle, probe, electron. handweheel. Machine can be inspected under power.
            x-travel 1000 mm
            y-travel 600 mm
            z-travel 600 mm
            Control iTNC530
            table surface area 1200 x 600 mm
            table load 0,75 t
            tool taper SK40
            spindle turning speed - stepless 1 - 10000 U/min
            feed X/Y/Z/-axis 1 - 10000 mm/min
            rapid traverse X/Y/Z 32,00 m/min
            tool length - max. 340 mm
            tool diameter 120 mm
            total power requirement 27,00 kW
            weight of the machine ca. 8,50 t
            dimensions of the machine ca. 5,50 x 3,50 x H3,50 m
            Description :
            Vertical Machining Center with HEIDENHAIN iTNC530 control, chip-convejor,
            coolant-unit, coolant/air through the spindle, probe, electron. handweheel.
            Machine can be inspected under power.
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DMG MORI CMX 800 V


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8158 · Machining Center - Vertical

          DMG MORI - CMX 800 V - - 2016 - SLIMline Siemens

          Technical details
          x-travel 800 mm︱y-travel 560 mm︱z-travel 510 mm︱control SLIMline Siemens︱Main spindle: ︱turning speed range - main spindle 20 - 12.000 min/-1︱power capacity - main spindel 13 / 9 kW︱tool taper SK 40 ︱max. Torque 82 / 54 Nm︱tension force 8 kN︱work table: ︱table surface area 1.100 x 560 mm︱max. table load 800 kg︱table height over floor 850 mm︱distance spindle nose and table 120 - 630 mm︱Tool-Presetter: ︱number of toolpositions 30 pos.︱Max. mould width 80 / (125) mm︱max. tool length 300 mm︱max. tool weight 8 kg︱
          CNC - MachiningCenter Vertical DMG MORI - CMX 800 V - without clamping-system
            x-travel 800 mm
            y-travel 560 mm
            z-travel 510 mm
            control SLIMline Siemens
            turning speed range - main spind. 20 - 12.000 min/-1
            power capacity - main spindel 13 / 9 kW
            tool taper SK 40
            max. Torque 82 / 54 Nm
            tension force 8 kN
            table surface area 1.100 x 560 mm
            max. table load 800 kg
            table height over floor 850 mm
            distance spindle nose and table 120 - 630 mm
            number of toolpositions 30 pos.
            Max. mould width 80 / (125) mm
            max. tool length 300 mm
            max. tool weight 8 kg
            Description :
            CNC - MachiningCenter Vertical
            DMG MORI - CMX 800 V

            - without clamping-system

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DMG MORI ecoMill 600 V (27A)


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8240 · Machining Center - Vertical

          DMG MORI - ecoMill 600 V (27A) - - 2016 - Siemens SlimLine

          Technical details
          x-travel 600 mm︱y-travel 560 mm︱z-travel 510 mm︱Control Siemens SlimLine︱Main spindle: ︱Max. rpm 12.000 min/-1︱power capacity - main spindel 13 / 9 kW︱max. Torque 82 / 54 Nm︱tool taper SK 40 ︱distance spindle nose and table 120 - 630 mm︱work table: ︱table surface area 900 x 560 mm︱max. table load 600 kg︱T-slots 5 ︱work height max. 850 mm︱tool magazin: ︱number of toolpositions 30 pos.︱tool taper SK 40 ︱max. tool diameter 80 mm︱max. tool-dia with free toolbox 125 mm︱
          CNC - Machiningcenter Vertical DMG MORI - ecoMill 600 V
            x-travel 600 mm
            y-travel 560 mm
            z-travel 510 mm
            Control Siemens SlimLine
            Max. rpm 12.000 min/-1
            power capacity - main spindel 13 / 9 kW
            max. Torque 82 / 54 Nm
            tool taper SK 40
            distance spindle nose and table 120 - 630 mm
            table surface area 900 x 560 mm
            max. table load 600 kg
            T-slots 5
            work height max. 850 mm
            number of toolpositions 30 pos.
            tool taper SK 40
            max. tool diameter 80 mm
            max. tool-dia with free toolbox 125 mm
            Description :
            CNC - Machiningcenter Vertical
            DMG MORI - ecoMill 600 V

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical MAKINO V 77


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8536 · Machining Center - Vertical

          MAKINO - V 77 - - 2016 - Fanuc 31i Pro6

          Technical details
          x-travel 1.200 mm︱y-travel 700 mm︱z-travel 650 mm︱Control Fanuc 31i Pro6 ︱Main spindle: ︱turning speed range - main spindle 50 - 18.000 min/-1︱power capacity - main spindel 22 / 18,5 kW︱max. Torque 151 Nm︱tool taper HSK-A100 ︱spindle bearing diameter 100 mm︱tool clamping max. 45 kN︱work table: ︱table surface area 1.400 x 700 mm︱max. table load 2.500 kg︱distance spindle nose and table 250 - 900 mm︱T-slots 6x 18H8 x 100 mm︱Tool-Presetter: ︱number of toolpositions 20 pos.︱tool taper HSK-A100 ︱max. tool diameter 70 / (120) mm︱
          CNC-MachiningCenter Vertical MAKINO - V 77 - young, good-condition Machine - few operating-hours
            x-travel 1.200 mm
            y-travel 700 mm
            z-travel 650 mm
            Control Fanuc 31i Pro6
            turning speed range - main spind. 50 - 18.000 min/-1
            power capacity - main spindel 22 / 18,5 kW
            max. Torque 151 Nm
            tool taper HSK-A100
            spindle bearing diameter 100 mm
            tool clamping max. 45 kN
            table surface area 1.400 x 700 mm
            max. table load 2.500 kg
            distance spindle nose and table 250 - 900 mm
            T-slots 6x 18H8 x 100 mm
            number of toolpositions 20 pos.
            tool taper HSK-A100
            max. tool diameter 70 / (120) mm
            Description :
            CNC-MachiningCenter Vertical
            MAKINO - V 77

            - young, good-condition Machine
            - few operating-hours
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DMG MORI CMX 800 V


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8362 · Machining Center - Vertical

          DMG MORI - CMX 800 V - - 2016 - SLIMline Siemens

          Technical details
          x-travel 800 mm︱y-travel 560 mm︱z-travel 510 mm︱control SLIMline Siemens︱Main spindle: ︱turning speed range - main spindle max. 12.000 min/-1︱power capacity - main spindel 13 / 9 kW︱tool taper SK 40 ︱max. Torque 83 / 57 Nm︱work table: ︱table surface area 1.100 x 560 mm︱max. table load 800 kg︱table height over floor 850 mm︱Tool-Presetter: ︱number of toolpositions 30 pos.︱Max. mould width 80 / (125) mm︱max. tool length 300 mm︱max. tool weight 8 kg︱feeds: ︱rapid traverse 30 m/min︱
          CNC - MachiningCenter Vertical DMG MORI - CMX 800 V - Operating-Hours: Power-On: 6.500h / Spindle-Run: ca. 2.600h
            x-travel 800 mm
            y-travel 560 mm
            z-travel 510 mm
            control SLIMline Siemens
            turning speed range - main spind. max. 12.000 min/-1
            power capacity - main spindel 13 / 9 kW
            tool taper SK 40
            max. Torque 83 / 57 Nm
            table surface area 1.100 x 560 mm
            max. table load 800 kg
            table height over floor 850 mm
            number of toolpositions 30 pos.
            Max. mould width 80 / (125) mm
            max. tool length 300 mm
            max. tool weight 8 kg
            rapid traverse 30 m/min
            Description :
            CNC - MachiningCenter Vertical
            DMG MORI - CMX 800 V

            - Operating-Hours: Power-On: 6.500h / Spindle-Run: ca. 2.600h

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DMG MORI MillTap 700 / 5 Axis


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8738 · Machining Center - Vertical

          DMG MORI - MillTap 700 / 5 Axis - - 2016 - Siemens 840 D SL

          Technical details
          x-travel 700 mm︱y-travel 420 mm︱z-travel 380 mm︱control Siemens 840 D SL ︱distance spindle /table 200 - 580 mm︱Main spindle: ︱Number of revolutions 20 - 10.000 rpm︱power capacity - main spindel 10,4 / 6 kW︱max. Torque 58 Nm︱tool taper BBT 30 BIG+︱NC-Tilting round table: ︱table diameter 200 mm︱max. table load 100 kg︱Swivel range A: -100 / +120 °︱rotation range C: 360 °︱T-slots 2x 10H7 x 90 mm︱Tool-Presetter: ︱number of toolpositions 25 pos.︱tool taper BBT 30 BIG+︱max. tool diameter 80 mm︱
          CNC - Compact Machining Center DMG MORI - MillTap 700 / 5 Axis - 5 Axis simultaneous - Operating-Hours: Power-On: ca. 1.300h Spindle: ca. 470h - TOP-Condition!
            x-travel 700 mm
            y-travel 420 mm
            z-travel 380 mm
            control Siemens 840 D SL
            distance spindle /table 200 - 580 mm
            Number of revolutions 20 - 10.000 rpm
            power capacity - main spindel 10,4 / 6 kW
            max. Torque 58 Nm
            tool taper BBT 30 BIG+
            table diameter 200 mm
            max. table load 100 kg
            Swivel range A: -100 / +120 °
            rotation range C: 360 °
            T-slots 2x 10H7 x 90 mm
            number of toolpositions 25 pos.
            tool taper BBT 30 BIG+
            max. tool diameter 80 mm
            Description :
            CNC - Compact Machining Center
            DMG MORI - MillTap 700 / 5 Axis

            - 5 Axis simultaneous
            - Operating-Hours: Power-On: ca. 1.300h Spindle: ca. 470h
            - TOP-Condition!


          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DMG MORI ecoMill 800 V


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18176 · Machining Center - Vertical

          DMG MORI - ecoMill 800 V - - 2016 - Siemens SlimLine

          Technical details
          x-travel 800 mm︱y-travel 560 mm︱z-travel 510 mm︱Control Siemens SlimLine︱Main spindle: ︱Max. rpm 12.000 min/-1︱power capacity - main spindel 13 / 9 kW︱max. Torque 82 / 54 Nm︱tool taper SK 40 ︱distance spindle nose and table 120 - 630 mm︱work table: ︱table surface area 1100 x 560 mm︱max. table load 800 kg︱work height max. 850 mm︱tool magazin: ︱number of toolpositions 30 pos.︱tool taper SK 40 ︱max. tool diameter 80 mm︱max. tool-dia with free toolbox 125 mm︱max. tool length 300 mm︱
          - Siemens Slime Line CNC Control - Coolant with internal cooling 12bar - Ecoline Touch Probe - Autom. Cabin Roof - chip conveyor 5300h Work- & 1550h Spindle Hourss
            x-travel 800 mm
            y-travel 560 mm
            z-travel 510 mm
            Control Siemens SlimLine
            Max. rpm 12.000 min/-1
            power capacity - main spindel 13 / 9 kW
            max. Torque 82 / 54 Nm
            tool taper SK 40
            distance spindle nose and table 120 - 630 mm
            table surface area 1100 x 560 mm
            max. table load 800 kg
            work height max. 850 mm
            number of toolpositions 30 pos.
            tool taper SK 40
            max. tool diameter 80 mm
            max. tool-dia with free toolbox 125 mm
            max. tool length 300 mm
            Description :
            - Siemens Slime Line CNC Control
            - Coolant with internal cooling 12bar
            - Ecoline Touch Probe
            - Autom. Cabin Roof
            - chip conveyor

            5300h Work- & 1550h Spindle Hourss
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DMG MORI ecoMill 600 V (56A)


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8089 · Machining Center - Vertical

          DMG MORI - ecoMill 600 V (56A) - - 2016 - Siemens SlimLine

          Technical details
          x-travel 600 mm︱y-travel 560 mm︱z-travel 510 mm︱Control Siemens SlimLine︱Main spindle: ︱Max. rpm 12.000 min/-1︱power capacity - main spindel 13 / 9 kW︱max. Torque 82 / 54 Nm︱tool taper SK 40 ︱distance spindle nose and table 120 - 630 mm︱work table: ︱table surface area 900 x 560 mm︱max. table load 600 kg︱T-slots 5 ︱work height max. 850 mm︱tool magazin: ︱number of toolpositions 30 pos.︱tool taper SK 40 ︱max. tool diameter 80 mm︱max. tool-dia with free toolbox 125 mm︱
          CNC - Machiningcenter Vertical DMG MORI - ecoMill 600 V - Operating-Hours: ca. 3.150h / Spindle-hrs.: ca. 970h
            x-travel 600 mm
            y-travel 560 mm
            z-travel 510 mm
            Control Siemens SlimLine
            Max. rpm 12.000 min/-1
            power capacity - main spindel 13 / 9 kW
            max. Torque 82 / 54 Nm
            tool taper SK 40
            distance spindle nose and table 120 - 630 mm
            table surface area 900 x 560 mm
            max. table load 600 kg
            T-slots 5
            work height max. 850 mm
            number of toolpositions 30 pos.
            tool taper SK 40
            max. tool diameter 80 mm
            max. tool-dia with free toolbox 125 mm
            Description :
            CNC - Machiningcenter Vertical
            DMG MORI - ecoMill 600 V

            - Operating-Hours: ca. 3.150h / Spindle-hrs.: ca. 970h

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical DOOSAN DT 360 D


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17488 · Machining Center - Vertical

          DOOSAN - DT 360 D - - 2015/Unused - Fanuc 0I-MD

          Technical details
          x-travel 520 mm︱y-travel 360 mm︱z-travel 350 mm︱Control Fanuc 0I-MD ︱distance spindle nose and table 150 - 500 mm︱Main spindle: ︱turning speed range - main spindle 80 - 12.000 min/-1︱power capacity - main spindel 5,5 / 3,5 kW︱max. Torque 82,7 Nm︱tool taper BT 30 ︱work table: ︱table surface area 2x 630 x 375 mm︱max. table load je 200 kg︱Tool-Presetter: ︱number of toolpositions 12 pos.︱tool taper BT 30 ︱change-time tool to tool 1,5 sec︱change-time chip to chip 2,5 sec︱feeds: ︱rapid traverse ( X / Y / Z ) 48 m/min︱
          CNC Machining Center Vertical Machine is unused!!! - CNC control Fanuc 0I-MD + 8,4 "color screen - Machine cover: Type splash guard with roof - Internal coolant supply approx. 13.5 bar (50 Hz) 1.5 kW - oil skimmer - DOOSAN Tool Load Monitoring System (DTMT tool breakage monitoring by means of Active power measurement) - Tool changer 12-fold (BT 30) - rotary pallet changer (2 tables)
            x-travel 520 mm
            y-travel 360 mm
            z-travel 350 mm
            Control Fanuc 0I-MD
            distance spindle nose and table 150 - 500 mm
            turning speed range - main spind. 80 - 12.000 min/-1
            power capacity - main spindel 5,5 / 3,5 kW
            max. Torque 82,7 Nm
            tool taper BT 30
            table surface area 2x 630 x 375 mm
            max. table load je 200 kg
            number of toolpositions 12 pos.
            tool taper BT 30
            change-time tool to tool 1,5 sec
            change-time chip to chip 2,5 sec
            rapid traverse ( X / Y / Z ) 48 m/min
            Description :
            CNC Machining Center Vertical
            Machine is unused!!!
            - CNC control Fanuc 0I-MD + 8,4 "color screen
            - Machine cover: Type splash guard with roof
            - Internal coolant supply approx. 13.5 bar (50 Hz) 1.5 kW
            - oil skimmer
            - DOOSAN Tool Load Monitoring System (DTMT tool breakage monitoring by means of
            Active power measurement)
            - Tool changer 12-fold (BT 30)
            - rotary pallet changer (2 tables)
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical HAAS VF 5


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02592 · Machining Center - Vertical

          HAAS - VF 5 - - 2015 - Haas

          Technical details
          x-travel 1270 mm︱y-travel 660 mm︱z-travel 635 mm︱control Haas ︱table surface area 1320 x 457 mm︱rapid traverse 20 m/min︱table load 800 kg︱turning speed range 11000 1/min︱power capacity - milling spindle 15 kW︱no. of tools in the magazine 40 Stück︱tool taper SK 40
            x-travel 1270 mm
            y-travel 660 mm
            z-travel 635 mm
            control Haas
            table surface area 1320 x 457 mm
            rapid traverse 20 m/min
            table load 800 kg
            turning speed range 11000 1/min
            power capacity - milling spindle 15 kW
            no. of tools in the magazine 40 Stück
            tool taper SK 40
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical HAAS  VF 4


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02995 · Machining Center - Vertical

          HAAS - VF 4 - - 2015 - Haas

          Technical details
          x-travel 1270 mm︱y-travel 508 mm︱z-travel 635 mm︱control Haas ︱table surface area 1320 x 500 mm︱rapid traverse 20 m/min︱table load 800 kg︱turning speed range 8000 1/min︱power capacity - milling spindle 15 kW︱no. of tools in the magazine 20 Stück︱tool taper SK 40 ︱weight of the machine ca. 5.5 t︱dimensions m︱
          GOOD MACHINE IM ME OFFICE UNDER POWER INTERFACE FOR 4 AXI
            x-travel 1270 mm
            y-travel 508 mm
            z-travel 635 mm
            control Haas
            table surface area 1320 x 500 mm
            rapid traverse 20 m/min
            table load 800 kg
            turning speed range 8000 1/min
            power capacity - milling spindle 15 kW
            no. of tools in the magazine 20 Stück
            tool taper SK 40
            weight of the machine ca. 5.5 t
            Description :
            GOOD MACHINE
            IM ME OFFICE UNDER POWER
            INTERFACE FOR 4 AXI

          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical HURCO VM 10 Ui 5


          • Glaub Werkzeugmaschinen GmbH
          • Industriestraße 36
          • 74194 Neuenstadt am Kocher
          • Deutschland

          • +49 (0) 7139 9366 744
            +49 (0) 7139 9365 794
          • service@gwg-maschinen.com
            www.gwg-maschinen.com
          #2029-1173 · Machining Center - Vertical

          HURCO - VM 10 Ui 5 - - 2015 - Winmax

          Technical details
          x-travel 533 mm︱y-travel 406 mm︱z-travel 483 mm︱Control Winmax ︱dimensions of the machine ca. 2500 x 2300 x 2800 mm︱
            x-travel 533 mm
            y-travel 406 mm
            z-travel 483 mm
            Control Winmax
            dimensions of the machine ca. 2500 x 2300 x 2800 mm
          Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Vertical HAAS   VF 5-40


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02695 · Machining Center - Vertical

          HAAS - VF 5-40 - - 2014 - Haas

          Technical details
          x-travel 1270 mm︱y-travel 508 mm︱z-travel 635 mm︱control Haas ︱table surface area 1320 x 457 mm︱rapid traverse 20 m/min︱table load 800 kg︱turning speed range 7500 1/min︱power capacity - milling spindle 15 kW︱no. of tools in the magazine 24 Stück︱tool taper SK 40
          MACHINE LIKE NEW ONLY 500 SPINDEL HOURS
            x-travel 1270 mm
            y-travel 508 mm
            z-travel 635 mm
            control Haas
            table surface area 1320 x 457 mm
            rapid traverse 20 m/min
            table load 800 kg
            turning speed range 7500 1/min
            power capacity - milling spindle 15 kW
            no. of tools in the magazine 24 Stück
            tool taper SK 40
            Description :
            MACHINE LIKE NEW ONLY 500 SPINDEL HOURS
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   


          Buy your used vertical machining center from LagerMaschinen.
          A vertical machining center from LagerMaschinen is just what you need.

          A vertical machining center is a tool used in machine shops. As its name indicates the cutters on this machine are vertically oriented. The vertical machining center is ideal for work that involves cutting on one plane or diesinking which is the process of making moulds amongst other things. This type of machining center can be manually or automatically operated. Since the mid 1900s many companies employ a CNC machining center to improve precision. The vertical machining center comes in a wide variety of sizes from small machines that are perfect for hobby machinists to massive machines that fill a room. Regardless of the size machine you need you can be sure to find just the vertical machining center you are looking for at LagerMaschinen.

          LagerMaschinen provides quality machines at bargain prices.

          For many companies – in particular small and new companies - the price of a new vertical machining center can be a burden. Companies involved in milling and machining can trust in LagerMaschinen’s extensive network of experts and professionals: the vertical machine center fulfills rigorous standards ensuring the highest quality possible at a price cheaper that that of a new machine. Businesses involved in moulding and casting need to be sure that their equipment meets safety requirements for materials and operators alike to ensure the best results on the job. With LagerMaschinen by your side you can work with your vertical machining center knowing you have the quality you need at the price you want.