Réseau européen de revendeurs de machines de stockage

Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Matthias Ehlers Werkzeugmaschinen - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe DMG Automation Gildemeister / Kuka KR60


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-800056 · CNC Lathe

          DMG Automation - Gildemeister / Kuka KR60 - - 2009 -

          Technical details
          number of controlled axis . ︱workpiece weight . kg︱throat . mm︱Control ︱auto power on hours ︱Number of working hours h︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Raw and finished part grippers Measuring parts drawer Separation slip between the pallet for processing and the pallet for the workers Loaded or unloaded. Manual control unit for KUKA robots, as well as control panel for use on one Lathe. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            number of controlled axis .
            workpiece weight . kg
            throat . mm
            Description :
            Raw and finished part grippers
            Measuring parts drawer
            Separation slip between the pallet for processing and the pallet for the workers
            Loaded or unloaded.
            Manual control unit for KUKA robots, as well as control panel for use on one
            Lathe.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  CNC Lathe VDF BOEHRINGER NG 2000


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020106 · CNC Lathe

          VDF BOEHRINGER - NG 2000 - - 2000 - SIEMENS 840 D

          Technical details
          turning diameter 290 mm︱turning length 850 mm︱control SIEMENS 840 D ︱speeds 30 - 3000 U/min︱total power requirement 65 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 5x2x2 m︱
          In our opinion, the machine is in good condition used condition. Equipped with: C-axis Tool Chip conveyor NC tailstock *** Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 290 mm
            turning length 850 mm
            control SIEMENS 840 D
            speeds 30 - 3000 U/min
            total power requirement 65 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 5x2x2 m
            Description :
            In our opinion, the machine is in good condition
            used condition.

            Equipped with:
            C-axis
            Tool
            Chip conveyor
            NC tailstock


            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  CNC Lathe TRAUB TNC 42/65 DG


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606016 · CNC Lathe

          TRAUB - TNC 42/65 DG - - 1996 - TRAUB TX 8F

          Technical details
          turning diameter im vorderen Lager 140 mm︱turning length 450 mm︱control TRAUB TX 8 F ︱total power requirement 39 kW︱weight of the machine ca. 4,7 t︱required space 4x1,8x2 m︱
            turning diameter im vorderen Lager 140 mm
            turning length 450 mm
            control TRAUB TX 8 F
            total power requirement 39 kW
            weight of the machine ca. 4,7 t
            required space 4x1,8x2 m
          Datasheet
          Request / Contact
          used  CNC Lathe TRAUB TND 400


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606015 · CNC Lathe

          TRAUB - TND 400 - - 1990 - TRAUB SYSTEM TX 8 F

          Technical details
          turning diameter 480 mm︱turning length 800 mm︱control TRAUB SYSTEM TX 8F ︱c-axis 180 Nm ︱total power requirement 30 kW︱weight of the machine ca. 4,3 t︱required space 3x2x2 m︱
          This machine can be viewed under power by appointment and is in our estimation in a technically good condition. Equipped with: Chip conveyor 3-jaw chuck KNC S-200 Collet head size E185 (incl. approx. 10 collets) 2 powered tools 3 holders outside machining 3 holders for internal machining The tools and clamping devices are not included in the scope of delivery. *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            turning diameter 480 mm
            turning length 800 mm
            control TRAUB SYSTEM TX 8F
            c-axis 180 Nm
            total power requirement 30 kW
            weight of the machine ca. 4,3 t
            required space 3x2x2 m
            Description :
            This machine can be viewed under power by appointment and
            is in our estimation in a technically good condition.

            Equipped with:
            Chip conveyor
            3-jaw chuck KNC S-200
            Collet head size E185
            (incl. approx. 10 collets)
            2 powered tools
            3 holders outside machining
            3 holders for internal machining

            The tools and clamping devices are not included in the scope of delivery.

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  CNC Lathe SAEILO TONGIL THN-4


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020102 · CNC Lathe

          SAEILO TONGIL - THN-4 - - 1988 - CNC Bahnsteuerung FANUC OT-B

          Technical details
          turning diameter Futter210 mm︱turning length 620 mm︱control CNC Bahnsteuerung FANUC OT-B︱ 10 Stationen︱main spindle bore 58 mm︱total power requirement 22 kW︱weight of the machine ca. 3,1 t︱dimensions of the machine ca. 3,7x1,4x1,6 m︱
          It is a demonstration machine that was used for demonstration purposes at trade fairs. Top condition. *** Changes and errors in the technical data and see also Reserve prior sale! ***
            turning diameter Futter210 mm
            turning length 620 mm
            control CNC Bahnsteuerung FANUC OT-B
            10 Stationen
            main spindle bore 58 mm
            total power requirement 22 kW
            weight of the machine ca. 3,1 t
            dimensions of the machine ca. 3,7x1,4x1,6 m
            Description :

            It is a demonstration machine that was used for demonstration purposes at trade fairs. Top condition.

            *** Changes and errors in the technical data and see also
            Reserve prior sale! ***
          Datasheet
          Request / Contact

          Facing Lathe

          used  Facing Lathe SEIGER LC RECORD 2200


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606034 · Facing Lathe

          SEIGER - LC RECORD 2200 - - 2009 - Siemens 840D SL ShopMill

          Technical details
          weight of the machine ca. 21 t︱required space 8x4,2x3,2 m︱total power requirement 20 kW︱turning diameter over slide rest mm︱
            weight of the machine ca. 21 t
            required space 8x4,2x3,2 m
            total power requirement 20 kW
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled KERN CD 402


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606027 · Lathe - cycle-controlled

          KERN - CD 402 - - 2004 - Heidenhain ManualPlus

          Technical details
          turning length 830 mm︱greates pass round over bed 400 mm︱control Heidehhain ManualPlus 4110︱turning speed range max. 3000 U/min︱travel of cross-slides 220 mm︱total power requirement 24 kW︱weight of the machine ca. 3 t︱required space 4x2,5x2 m︱
          This machine can be viewed under power by appointment and is in our estimation in a technically good condition. The machine comes with a large selection of VDI 30 holders and various jaw sets, we are happy to provide the list on request. *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            turning length 830 mm
            greates pass round over bed 400 mm
            control Heidehhain ManualPlus 4110
            turning speed range max. 3000 U/min
            travel of cross-slides 220 mm
            total power requirement 24 kW
            weight of the machine ca. 3 t
            required space 4x2,5x2 m
            Description :
            This machine can be viewed under power by appointment and
            is in our estimation in a technically good condition.

            The machine comes with a large selection of VDI 30 holders and various jaw sets, we are happy to provide the list on request.

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled VDF BOEHRINGER DUS 560 x 2000


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606028 · Lathe - cycle-controlled

          VDF BOEHRINGER - DUS 560 x 2000 - - 2003 -

          Technical details
          turning diameter 570 mm︱turning length 2000 mm︱no. of turning speeds max. 2500 U/min︱total power requirement 25 kW︱weight of the machine ca. 7 t︱required space 5x2,3x2 m︱
          This machine can be viewed under power by appointment and is in our estimation in a technically good condition. Equipment and accessories: Bezel Tailstock Multifix type C The tools and clamping devices are not included in the scope of delivery. *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            turning diameter 570 mm
            turning length 2000 mm
            no. of turning speeds max. 2500 U/min
            total power requirement 25 kW
            weight of the machine ca. 7 t
            required space 5x2,3x2 m
            Description :
            This machine can be viewed under power by appointment and
            is in our estimation in a technically good condition.

            Equipment and accessories:
            Bezel
            Tailstock
            Multifix type C

            The tools and clamping devices are not included in the scope of delivery.

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal AVEREX HS 450 i


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606026 · Machining Center - Horizontal

          AVEREX - HS 450 i - - 2011 - FANUC 31i-Model A

          Technical details
          x-travel 640 mm︱y-travel 610 mm︱z-travel 680 mm︱spindle taper: BT Big Plus 40︱size of pallet 400x400 mm︱rapid travel range 60.000 m/min︱workpiece weight max. 500 kg︱spindle turning speed range 40-15000 U/min︱total power requirement 15 kW︱weight of the machine ca. 11,7 t︱required space 5,4x3,9x2,6 m︱
          The machine can still be viewed under power and, according to our assessment, is in a technically excellent condition! The tools and clamping devices are not included in the scope of delivery. The machine is equipped with: IKZ 3-D probe B-axis Degree of indexation 0.001 ° Chip conveyor Tool changer, 80 places *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            x-travel 640 mm
            y-travel 610 mm
            z-travel 680 mm
            spindle taper: BT Big Plus 40
            size of pallet 400x400 mm
            rapid travel range 60.000 m/min
            workpiece weight max. 500 kg
            spindle turning speed range 40-15000 U/min
            total power requirement 15 kW
            weight of the machine ca. 11,7 t
            required space 5,4x3,9x2,6 m
            Description :
            The machine can still be viewed under power and, according to our assessment, is in a technically excellent condition!

            The tools and clamping devices are not included in the scope of delivery.

            The machine is equipped with:
            IKZ
            3-D probe
            B-axis
            Degree of indexation 0.001 °
            Chip conveyor
            Tool changer, 80 places

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal Doerries Scharmann SOLON 4


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020098 · Machining Center - Horizontal

          Doerries Scharmann - SOLON 4 - - 1994 -

          Technical details
          x-travel 2400 mm︱y-travel 1800 mm︱z-travel 2000 mm︱A-axis +/- 95°︱b-axis 360 °︱turning speeds 20-6000 U/min︱spindle taper ISO 50 ︱table plate 800x800 mm︱table load 2,5 t︱swing circle 2400 mm︱workpiece length - max. 2250 mm︱work piece width 1050 mm︱total power requirement 35 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. 15x10x6 m︱
          This machine can still be viewed under power in the factory and, in our opinion, is in good technical condition. Control: NUM Güttinger Farikat: NUM 1060 F Machine with transport system: Pallet stations in front of the machine 2 Setup station 1 Pallet storage locations 3 Pallets in the system 5 Accessories: with another unused 5-axis head *** Changes and errors in the technical data and information Subject to prior sale! ***
            x-travel 2400 mm
            y-travel 1800 mm
            z-travel 2000 mm
            A-axis +/- 95°
            b-axis 360 °
            turning speeds 20-6000 U/min
            spindle taper ISO 50
            table plate 800x800 mm
            table load 2,5 t
            swing circle 2400 mm
            workpiece length - max. 2250 mm
            work piece width 1050 mm
            total power requirement 35 kW
            weight of the machine ca. 50 t
            dimensions of the machine ca. 15x10x6 m
            Description :
            This machine can still be viewed under power in the factory and, in our opinion, is in good technical condition.

            Control: NUM Güttinger
            Farikat: NUM 1060 F

            Machine with transport system:
            Pallet stations in front of the machine 2
            Setup station 1
            Pallet storage locations 3
            Pallets in the system 5

            Accessories:
            with another unused 5-axis head

            *** Changes and errors in the technical data and information
            Subject to prior sale! ***
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal DMG MORI DMU 60 eVo


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020066 · Machining Center - Universal

          DMG MORI - DMU 60 eVo - - 2012 - Siemens 840D SL ShopMill

          Technical details
          x-travel 600 mm︱y-travel 500 mm︱z-travel 500 mm︱turning speed range - main spindle 20 - 14000 min/-1︱spindle drive 18,9 (40%), 14 (100%) kW︱tool taper Sk40 nach DIN 69871 ︱chain magazin for 30 tools ︱control Siemens 840D SL ShopMill ︱table surface area 600 x 500 mm︱swival range +/- B-Achse +110/-5 °︱ 360 °︱Loading weight 400 kg︱
          Options and accessories: - Siemens 840D SL Operate 3D control ShopMill Open user interface DMG ERGOline Control, 19 '' screen - NC swivel rotary table including table cooling Rotary union for air and hydraulics in the swivel table, 4-channel Media connection on the front of the table - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct position measuring system - full cabin - Renishaw PP 60 optical (OMP60) infrared probe - IKZ, paper band filter bar / 231 / min / tank 600l including rotating lens, sealing air Linear measuring system, bed flushing - Cooling guns for chip flushing - Scraper belt chip conveyor with cleaned slotted screen - Documentation + screen text - Expansion of virtual tool magazine to 499 tool places *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 600 mm
            y-travel 500 mm
            z-travel 500 mm
            turning speed range - main spind. 20 - 14000 min/-1
            spindle drive 18,9 (40%), 14 (100%) kW
            tool taper Sk40 nach DIN 69871
            control Siemens 840D SL ShopMill
            table surface area 600 x 500 mm
            swival range +/- B-Achse +110/-5 °
            360 °
            Loading weight 400 kg
            Description :
            Options and accessories:
            - Siemens 840D SL Operate 3D control
            ShopMill Open user interface
            DMG ERGOline Control, 19 '' screen
            - NC swivel rotary table including table cooling
            Rotary union for air and hydraulics
            in the swivel table, 4-channel
            Media connection on the front of the table
            - Heat exchanger for spindle and table
            - Active cooler for control cabinet
            - Direct position measuring system
            - full cabin
            - Renishaw PP 60 optical (OMP60) infrared probe
            - IKZ, paper band filter bar / 231 / min / tank 600l
            including rotating lens, sealing air
            Linear measuring system, bed flushing
            - Cooling guns for chip flushing
            - Scraper belt chip conveyor with cleaned slotted screen
            - Documentation + screen text
            - Expansion of virtual tool magazine to 499 tool places

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Universal DMG Deckel Maho DMU 60 FD duoBLOCK


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020017 · Machining Center - Universal

          DMG Deckel Maho - DMU 60 FD duoBLOCK - - 2010 - Siemens 840D solutionline

          Technical details
          x-travel 600 mm︱y-travel 700 mm︱z-travel 600 mm︱Control Siemens 840D solutionline ︱main spindle: ︱turning speed range - main spindle 12000 min/-1︱capacity main spindle 19 kW︱max. torque 82 Nm︱spindle hours 18000 h︱tool taper HSK 63 ︱tool changer: 60 fach ︱rotary table: ︱table surface area Ø 630 mm︱max. table load 600 kg︱rapid travel x/y/z 60 mm/min︱Number of working hours 29000 h︱feed speeds 0-60000 mm/min︱rapid traverse 60 m/min︱input unit 0,001 mm︱
          The machine can be visited by appointment. Milling and turning in one clamping with Direct Drive table and speeds up to 1200 1 / min The machine is in very good condition. *** Changes and errors in the technical data and specifications as well Subject to prior sale!***
            x-travel 600 mm
            y-travel 700 mm
            z-travel 600 mm
            Control Siemens 840D solutionline
            turning speed range - main spind. 12000 min/-1
            capacity main spindle 19 kW
            max. torque 82 Nm
            spindle hours 18000 h
            tool taper HSK 63
            tool changer: 60 fach
            table surface area Ø 630 mm
            max. table load 600 kg
            rapid travel x/y/z 60 mm/min
            Number of working hours 29000 h
            feed speeds 0-60000 mm/min
            rapid traverse 60 m/min
            input unit 0,001 mm
            Description :
            The machine can be visited by appointment.

            Milling and turning in one clamping with Direct Drive table and speeds
            up to 1200 1 / min

            The machine is in very good condition.


            *** Changes and errors in the technical data and specifications as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Universal DMG FD 125


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-20203 · Machining Center - Universal

          DMG - FD 125 - - 2003 - HEIDENHAIN iTNC 430

          Technical details
          x-travel 1250 mm︱y-travel 880 mm︱z-travel 800 mm︱Control HEIDENHAIN iTNC 430 ︱spindle taper HSK 100 A ︱table clamping surface: 1250x1000 mm︱b-axis Durchmesser 1250 mm 360 °︱ 800 U/min︱turning speed range 12000 U/min︱total power requirement 40 kW︱weight of the machine ca. 16,5 t︱dimensions of the machine ca. 7x6 m︱
          The machine can be viewed under power in the factory and ours Estimated in a technically perfect condition. 5-axis simultaneous machining. The tools and clamping devices are not included in the scope of delivery. *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            x-travel 1250 mm
            y-travel 880 mm
            z-travel 800 mm
            Control HEIDENHAIN iTNC 430
            spindle taper HSK 100 A
            table clamping surface: 1250x1000 mm
            b-axis Durchmesser 1250 mm 360 °
            800 U/min
            turning speed range 12000 U/min
            total power requirement 40 kW
            weight of the machine ca. 16,5 t
            dimensions of the machine ca. 7x6 m
            Description :
            The machine can be viewed under power in the factory and ours
            Estimated in a technically perfect condition.

            5-axis simultaneous machining.

            The tools and clamping devices are not included in the scope of delivery.


            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical Saeilo Contur MMV - 1800 A


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020005 · Machining Center - Vertical

          Saeilo Contur - MMV - 1800 A - - 2014 - Heidenhain ITNC 530

          Technical details
          x-travel 1800 mm︱y-travel 1000 mm︱z-travel 880 mm︱max. turning speeds 6000 min/-1︱capacity main spindle 35/25 - 40%/100% kW︱tool taper SK 50 ︱table surface area 2000 x 1000 mm︱number of tool places 32 Pos.︱rapid traverse 16 m/min︱control Heidenhain ITNC 530 ︱Number of working hours 18325 h︱spindle hours 7650 h︱total power requirement kW︱weight of the machine ca. 17 t︱dimensions of the machine ca. L 5 x B 3,6 x H 3,6 m︱
          In our opinion, the machine is in very good condition. - IKZ - chip conveyor - suction - Ball screws of the x and y axes September 2018 - Infrared probe - The control has extensive automatic measuring and scanning cycles Shown tools & receptacles are not included. *** Changes and errors in the technical data and information Subject to prior sale! ***
            x-travel 1800 mm
            y-travel 1000 mm
            z-travel 880 mm
            max. turning speeds 6000 min/-1
            capacity main spindle 35/25 - 40%/100% kW
            tool taper SK 50
            table surface area 2000 x 1000 mm
            number of tool places 32 Pos.
            rapid traverse 16 m/min
            control Heidenhain ITNC 530
            Number of working hours 18325 h
            spindle hours 7650 h
            weight of the machine ca. 17 t
            dimensions of the machine ca. L 5 x B 3,6 x H 3,6 m
            Description :
            In our opinion, the machine is in very good condition.

            - IKZ
            - chip conveyor
            - suction
            - Ball screws of the x and y axes September 2018
            - Infrared probe
            - The control has extensive automatic measuring and scanning cycles

            Shown tools & receptacles are not included.

            *** Changes and errors in the technical data and information
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical MTRent Vcut 85


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020027 · Machining Center - Vertical

          MTRent - Vcut 85 - - 2014 - Siemens 828 DSL Shopmill

          Technical details
          x-travel 850 mm︱y-travel 520 mm︱z-travel 610 mm︱Control Siemens 828 DSL Shopmill ︱distance spindle /table 150 - 760 mm︱main spindle: ︱max. turning speeds 10.000 min/-1︱drive capacity - main spindle 13 kW︱tool taper SK 40 ︱work table: ︱table surface area 1.000 x 520 mm︱max. table load 700 kg︱T-slots 5 ︱tool changer: ︱tool taper SK 40 ︱number of tool places 30 Pos.︱max. tool diameter 76 mm︱max. tool length 300 mm︱max. tool weight 7 kg︱change-time tool to tool 1,5 sec︱
          The machine can be viewed under power after making an appointment. Accessories: - Chip conveyor - IKZ *** Subject to changes and errors in the technical data and information as well as prior sale! ***
            x-travel 850 mm
            y-travel 520 mm
            z-travel 610 mm
            Control Siemens 828 DSL Shopmill
            distance spindle /table 150 - 760 mm
            max. turning speeds 10.000 min/-1
            drive capacity - main spindle 13 kW
            tool taper SK 40
            table surface area 1.000 x 520 mm
            max. table load 700 kg
            T-slots 5
            tool taper SK 40
            number of tool places 30 Pos.
            max. tool diameter 76 mm
            max. tool length 300 mm
            max. tool weight 7 kg
            change-time tool to tool 1,5 sec
            Description :
            The machine can be viewed under power after making an appointment.

            Accessories:
            - Chip conveyor
            - IKZ

            *** Subject to changes and errors in the technical data
            and information as well as prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical KITAMURA Mycenter 3 XiF


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020061 · Machining Center - Vertical

          KITAMURA - Mycenter 3 XiF - - 2006 - Fanuc Series 16i-MB

          Technical details
          x-travel 760 mm︱y-travel 460 mm︱z-travel 455 mm︱control Fanuc Series 16i-MB ︱Speed 20000 U/min.︱tool taper BT 40 ︱tool changing time 3,2 sec︱workpiece dia. 80 mm︱workpiece weight 8 kg︱Number of tools 30 St.︱table-size 860 x 410 mm︱no. of tables 2 ︱max. table load 200 kg︱Feedrate X-,Y-,Z,- axis 0 - 15000 mm/min︱rapid traverse X-axis 30000 m/min︱ 30000 m/min︱rapid traverse Z-axis 24000 m/min︱total power requirement 25 kVA︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3,1 x 0,65 x 1,75 m︱
          The machine can be viewed under power by appointment. Scope of delivery: - IKZ - 2-way pallet changer - chip conveyor *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 760 mm
            y-travel 460 mm
            z-travel 455 mm
            control Fanuc Series 16i-MB
            Speed 20000 U/min.
            tool taper BT 40
            tool changing time 3,2 sec
            workpiece dia. 80 mm
            workpiece weight 8 kg
            Number of tools 30 St.
            table-size 860 x 410 mm
            no. of tables 2
            max. table load 200 kg
            Feedrate X-,Y-,Z,- axis 0 - 15000 mm/min
            rapid traverse X-axis 30000 m/min
            30000 m/min
            rapid traverse Z-axis 24000 m/min
            total power requirement 25 kVA
            weight of the machine ca. 9 t
            dimensions of the machine ca. 3,1 x 0,65 x 1,75 m
            Description :
            The machine can be viewed under power by appointment.

            Scope of delivery:
            - IKZ
            - 2-way pallet changer
            - chip conveyor

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical HURCO VMX 30 mit 4/ 5 Achse


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020070 · Machining Center - Vertical

          HURCO - VMX 30 mit 4/ 5 Achse - - 2006 - Ultimax 4

          Technical details
          x-travel 760 mm︱y-travel 510 mm︱z-travel 610 mm︱control Ultimax 4 ︱main spindle: ︱max. turning speeds 10000 min/-1︱torque 210 Nm︱tool taper SK40Kitagawa TT 181 ︱faceplate diameter 180 mm︱centre height 180 mm︱spindle passage 40 mm︱tool turret: ︱number of tool places 24 Pos.︱Rapid traverse: X -Y-Z axis 30/ 30/ 20 m/min︱ 1000 kg︱
          The machine can be viewed under power by appointment. Equipment: - chip conveyor - IKZ with filter, 20 bar - Network, DXF software - Electronic handwheel - signal light - 4./5. Kitagawa axle, type: TT182BY-6 Further information: - Rotary union renewed - Tracking ball renewed - X-axis bearing renewed (09/2018) - spindle renewed (2017) - various laser measurements carried out (protocols available) - Comprehensive documentation / maintenance reports available The machine is in very good condition. *** Changes and errors in the technical data and information as well Subject to prior sale! ***
            x-travel 760 mm
            y-travel 510 mm
            z-travel 610 mm
            control Ultimax 4
            max. turning speeds 10000 min/-1
            torque 210 Nm
            tool taper SK40
            Kitagawa TT 181
            faceplate diameter 180 mm
            centre height 180 mm
            spindle passage 40 mm
            number of tool places 24 Pos.
            Rapid traverse: X -Y-Z axis 30/ 30/ 20 m/min
            1000 kg
            Description :
            The machine can be viewed under power by appointment.

            Equipment:
            - chip conveyor
            - IKZ with filter, 20 bar
            - Network, DXF software
            - Electronic handwheel
            - signal light
            - 4./5. Kitagawa axle, type: TT182BY-6

            Further information:
            - Rotary union renewed
            - Tracking ball renewed
            - X-axis bearing renewed (09/2018)
            - spindle renewed (2017)
            - various laser measurements carried out (protocols available)
            - Comprehensive documentation / maintenance reports available

            The machine is in very good condition.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical AXA VSC 3 - S / 50 / E


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606030 · Machining Center - Vertical

          AXA - VSC 3 - S / 50 / E - - 2006 - SIEMENS 840 D

          Technical details
          x-travel 5000 mm︱y-travel 900 mm︱z-travel 900 mm︱autom. controllable turning speeds 60-6.000 U/min U/min︱spindle taper 50 SK︱total power requirement 45 kW︱weight of the machine ca. 25 t︱required space 8,9m x 3,5m x 3,6m m︱
            x-travel 5000 mm
            y-travel 900 mm
            z-travel 900 mm
            autom. controllable turning spee. 60-6.000 U/min U/min
            spindle taper 50 SK
            total power requirement 45 kW
            weight of the machine ca. 25 t
            required space 8,9m x 3,5m x 3,6m m
          Datasheet
          Request / Contact
          used  Machining Center - Vertical Mazak VTC 30 C


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020093 · Machining Center - Vertical

          Mazak - VTC 30 C - - 1999 - Mazatrol M Plus

          Technical details
          x-travel 1660 mm︱y-travel 760 mm︱z-travel 660 mm︱control Mazatrol M Plus︱speeds 40 - 7000 U/min︱drive capacity - main spindle 11 kW︱table surface area 760x2000 mm︱number of tool places 24 Pos.︱tool taper SK 40︱total power requirement 32,8 kVA︱weight of the machine ca. 8,1 t︱dimensions of the machine ca. 6,0x4,0x3,5 m︱
          n our estimation, the machine is in good condition. The machine has no internal cooling through the spindle and no chip conveyor. *** Changes and errors in the technical data and information Subject to prior sale! ***
            x-travel 1660 mm
            y-travel 760 mm
            z-travel 660 mm
            control Mazatrol M Plus
            speeds 40 - 7000 U/min
            drive capacity - main spindle 11 kW
            table surface area 760x2000 mm
            number of tool places 24 Pos.
            tool taper SK 40
            total power requirement 32,8 kVA
            weight of the machine ca. 8,1 t
            dimensions of the machine ca. 6,0x4,0x3,5 m
            Description :
            n our estimation, the machine is in good condition.

            The machine has no internal cooling through the spindle and no chip conveyor.

            *** Changes and errors in the technical data and information
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical MATSUURA RA 3 F


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020114 · Machining Center - Vertical

          MATSUURA - RA 3 F - - 1995 - YASNAK

          Technical details
          x-travel 800 mm︱y-travel 440 mm︱z-travel 485 mm︱control YASNAK ︱distance spindle /table 155 - 635 mm︱turning speed range 30 - 8000 U/min︱number of tool places 30 Pos.︱max. tool diameter 96 mm︱max. tool length 350 mm︱max. tool weight 10 kg︱numbers of pallets 2 ︱palettenwechsler: Pendelwechsel ︱size of pallet 800 x 420 mm︱load on palet 300 kg︱
          This machine can be viewed under power by appointment and is in our estimation in a technically good condition. Equipment and accessories: - pallet changer - tool changer - chip conveyor The tools and clamping devices are not included in the scope of delivery. *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            x-travel 800 mm
            y-travel 440 mm
            z-travel 485 mm
            control YASNAK
            distance spindle /table 155 - 635 mm
            turning speed range 30 - 8000 U/min
            number of tool places 30 Pos.
            max. tool diameter 96 mm
            max. tool length 350 mm
            max. tool weight 10 kg
            numbers of pallets 2
            palettenwechsler: Pendelwechsel
            size of pallet 800 x 420 mm
            load on palet 300 kg
            Description :
            This machine can be viewed under power by appointment and
            is in our estimation in a technically good condition.

            Equipment and accessories:
            - pallet changer
            - tool changer
            - chip conveyor

            The tools and clamping devices are not included in the scope of delivery.

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used  Milling Machining Centers 5 Axis UNITECH FB 63


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020079 · Milling Machining Centers 5 Axis

          UNITECH - FB 63 - - 2012 - Heidenhain iTNC 530

          Technical details
          x-travel 1080 mm︱y-travel 610 mm︱z-travel 810 mm︱spindle tunring speed 15000 U/min︱Control Heidenhain iTNC 530 ︱rapid speed max. 30000 mm/min︱rotary table diameter 600 mm︱surface area table 1100 x 600 mm︱number of tool places 40 Pos.︱tool taper BT40 ︱max. workpiece weight 500 kg︱weight of the machine ca. 8 t︱
          The machine can be viewed under power by appointment. Equipment and accessories: - ICS up to 60 bar - Compressed air through the center of the spindle - chip conveyor - Minimal amount of lubrication The machine has a zero point clamping system built into the rotary table with 10 Tensioners from Schunk. This can be done with compressed air. In the short term, the ball screws are swapped in X and Y, in Z for example a year ago. *** Changes and errors in the technical data and also see Reserve prior sale! ***
            x-travel 1080 mm
            y-travel 610 mm
            z-travel 810 mm
            spindle tunring speed 15000 U/min
            Control Heidenhain iTNC 530
            rapid speed max. 30000 mm/min
            rotary table diameter 600 mm
            surface area table 1100 x 600 mm
            number of tool places 40 Pos.
            tool taper BT40
            max. workpiece weight 500 kg
            weight of the machine ca. 8 t
            Description :
            The machine can be viewed under power by appointment.

            Equipment and accessories:
            - ICS up to 60 bar
            - Compressed air through the center of the spindle
            - chip conveyor
            - Minimal amount of lubrication

            The machine has a zero point clamping system built into the rotary table with 10
            Tensioners from Schunk. This can be done with compressed air.

            In the short term, the ball screws are swapped in X and Y, in Z for example
            a year ago.

            *** Changes and errors in the technical data and also see
            Reserve prior sale! ***
          Datasheet
          Request / Contact

          milling machining centers - universal

          used  milling machining centers - universal MAHO MH 800 C


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606033 · milling machining centers - universal

          MAHO - MH 800 C - - 1992 - MAHO CNC 532

          Technical details
          x-travel 800 mm︱y-travel 500 mm︱z-travel 600 mm︱tool taper 40 ISO︱autom. controllable turning speeds 20-6300 U/min︱total power requirement 27 kvA︱weight of the machine ca. 7,3 t︱required space 3,7x2,5x2,9 m︱
            x-travel 800 mm
            y-travel 500 mm
            z-travel 600 mm
            tool taper 40 ISO
            autom. controllable turning spee. 20-6300 U/min
            total power requirement 27 kvA
            weight of the machine ca. 7,3 t
            required space 3,7x2,5x2,9 m
          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used  Tool Room Milling Machine - Universal TOS FV 30 CNC


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021004 · Tool Room Milling Machine - Universal

          TOS - FV 30 CNC - - 2002 - Heidenhain iTNC 530

          Technical details
          x-travel 760 mm︱y-travel 380 mm︱z-travel 450 mm︱Control Heidenhain iTNC 530 ︱main spindle: ︱turning speed range - main spindle 4000 min/-1︱drive capacity - main spindle 5,5 kW︱tool taper ISO 40 ︱work table: ︱table surface area 1300 x 305 mm︱max. table load 360 kg︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2,65 x 3,2 x 2,2 m︱
          The machine comes from an education center. It was used very little and is in very good condition. The accessories shown are not included in the scope of delivery. The machine can be viewed under power by appointment. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 760 mm
            y-travel 380 mm
            z-travel 450 mm
            Control Heidenhain iTNC 530
            turning speed range - main spind. 4000 min/-1
            drive capacity - main spindle 5,5 kW
            tool taper ISO 40
            table surface area 1300 x 305 mm
            max. table load 360 kg
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2,65 x 3,2 x 2,2 m
            Description :
            The machine comes from an education center. It was used very little and
            is in very good condition.

            The accessories shown are not included in the scope of delivery.

            The machine can be viewed under power by appointment.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal TOS FV 30 CNC


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021005 · Tool Room Milling Machine - Universal

          TOS - FV 30 CNC - - 1998 - Heidenhain TNC 124

          Technical details
          x-travel 760 mm︱y-travel 380 mm︱z-travel 450 mm︱control Heidenhain TNC 124 ︱main spindle: ︱turning speed range - main spindle 4000 min/-1︱drive capacity - main spindle 5,5 kW︱tool taper ISO 40 ︱work table: ︱table surface area 1300 x 305 mm︱max. table load 360 kg︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2,65 x 3,2 x 2,2 m︱
          The machine comes from an education center. It was used very little and is in very good condition. The machine can be viewed under power by appointment. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 760 mm
            y-travel 380 mm
            z-travel 450 mm
            control Heidenhain TNC 124
            turning speed range - main spind. 4000 min/-1
            drive capacity - main spindle 5,5 kW
            tool taper ISO 40
            table surface area 1300 x 305 mm
            max. table load 360 kg
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2,65 x 3,2 x 2,2 m
            Description :
            The machine comes from an education center. It was used very little and
            is in very good condition.

            The machine can be viewed under power by appointment.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Profil de commerçant: Matthias Ehlers Werkzeugmaschinen

          Contacter le commerçant



            Matthias Ehlers Machines-outils
           Nikolaus-Otto-Straße 19 + 21
            22946 Trittau
            Allemagne
            + 49 (0) 4154 - 986 99 12 "> + 49 (0) 4154 - 986 99 12
            + 49 (0) 4154 - 986 99 14
            anfrage@ehlers-wzm.de
            www.ehlers-wzm.de

          Profil de commerçant




          Matthias Ehlers Werkzeugmaschinen   22946 Trittau Nikolaus-Otto-Straße 19 + 21 Deutschland
          Matthias Ehlers Werkzeugmaschinen

          Nikolaus-Otto-Straße 19 + 21



          Contact Trader


            Matthias Ehlers Werkzeugmaschinen
           Nikolaus-Otto-Straße 19 + 21
            22946 Trittau
            Deutschland
            +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
            anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
            Contact person:

           




          Machine category


          Bandsägeautomat - Horizontal · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · CNC Drehmaschine · Doppelständerpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Entgratmaschine · Filteranlage · Fräsmaschine - Universal · Gewindeschleifmaschine · Innenschleifmaschine - Automat · Plandrehmaschine · Roboter - Handling · Rundschleifmaschine - Universal · Schleifmaschinenzubehör · Schärfmaschine · Senkerodiermaschine · Sicken- und Bördelmaschine · Späneförderer · Superfinishmaschine · Sägeblattschärfmaschine · Universal-Fräs- und Bohrwerk · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine · Werkzeugschleifmaschine - Universal · Zahnradprüfmaschine ·