Réseau européen de revendeurs de machines de stockage
+49 (0) 2389 5299080
Questions

Catégorie:
    Fabricant:
      Machines:
        Commerçant:
             Vue: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          Mager & Wedemeyer Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:

          Center Lathe

          used Center Lathe PINACHO ML 18 250 x1000

          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland
          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-310054 · Center Lathe

          PINACHO - ML 18 250 x1000 - - 2018 -

          Technical details
          turning diameter over bed 502 mm︱turning diameter over slide rest 310 mm︱turning length 1000 mm︱centre height 250 mm︱swing diameter over bed slide 440 mm︱bed width 300 mm︱upper slide travel cross 250 mm︱travel of upper support 130 mm︱spindle nose A2 DIN 55026 Form A ︱spindle bore 58 mm︱transmission ratio 3 ︱spindle turning speed - stepless 40 - 2080 U/min︱tailstock quill taper MT 4 ︱tailstock quill diameter 68 mm︱tailstock quill adjustment 200 mm︱main drive 5,5 kW︱coolant pump 0,1 kW︱turning tool - shaft cross cut 25 x 25 mm︱total power requirement ca. 6 kW︱weight of the machine ca. 1,52 t︱
          demonstration machine
            turning diameter over bed 502 mm
            turning diameter over slide rest 310 mm
            turning length 1000 mm
            centre height 250 mm
            swing diameter over bed slide 440 mm
            bed width 300 mm
            upper slide travel cross 250 mm
            travel of upper support 130 mm
            spindle nose A2 DIN 55026 Form A
            spindle bore 58 mm
            transmission ratio 3
            spindle turning speed - stepless 40 - 2080 U/min
            tailstock quill taper MT 4
            tailstock quill diameter 68 mm
            tailstock quill adjustment 200 mm
            main drive 5,5 kW
            coolant pump 0,1 kW
            turning tool - shaft cross cut 25 x 25 mm
            total power requirement ca. 6 kW
            weight of the machine ca. 1,52 t
            Description :
            demonstration machine
          Datasheet
          Request / Contact
          used Center Lathe PINACHO SC-325-80x1500

          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland
          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09170 · Center Lathe

          PINACHO - SC-325-80x1500 - - 2018 -

          Technical details
          turning diameter over bed 652 mm︱turning diameter over slide rest 450 mm︱turning length 1500 mm︱centre height 325 mm︱swing diameter over bed slide 595 mm︱bed width 350 mm︱upper slide travel cross 325 mm︱travel of upper support 155 mm︱spindle nose DIN 55026 Gr.8 ︱spindle bore 80 mm︱transmission ratio 3 ︱spindle turning speed - stepless 0 - 1700 U/min︱tailstock quill taper MT 5 ︱tailstock quill diameter 95 mm︱tailstock quill adjustment 220 mm︱main drive 7,5 kW︱coolant pump 0,1 kW︱turning tool - shaft cross cut 25 x 25 mm︱3-axis digital readout Fagor ︱total power requirement ca. 8 kW︱
            turning diameter over bed 652 mm
            turning diameter over slide rest 450 mm
            turning length 1500 mm
            centre height 325 mm
            swing diameter over bed slide 595 mm
            bed width 350 mm
            upper slide travel cross 325 mm
            travel of upper support 155 mm
            spindle nose DIN 55026 Gr.8
            spindle bore 80 mm
            transmission ratio 3
            spindle turning speed - stepless 0 - 1700 U/min
            tailstock quill taper MT 5
            tailstock quill diameter 95 mm
            tailstock quill adjustment 220 mm
            main drive 7,5 kW
            coolant pump 0,1 kW
            turning tool - shaft cross cut 25 x 25 mm
            3-axis digital readout Fagor
            total power requirement ca. 8 kW
            Description :

          Datasheet
          Request / Contact
          used Center Lathe MEXPOL TUS 800

          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland
          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09169F · Center Lathe

          MEXPOL - TUS 800 - - 2011 -

          Technical details
          turning diameter over bed 890 mm︱turning diameter over slide rest 490 mm︱turning length 3000 mm︱centre height 400 mm︱spindle passage Ø 155 mm︱turning dia. in gap 1060 mm︱bed width 700 mm︱turning speed range 3,7 - 1000 U/min︱number of turning speeds ranges 4 ︱number of feeds 160 ︱feeds - longitudinal 0,032 - 38,9 mm/U︱feeds - cross 0,016 - 19,45 mm/U︱tailstock taper MT 6 ︱tailstock quill diameter 125 mm︱tailstock quill stroke 250 mm︱faceplate with 4 clamps dia. 700 mm︱with live steady Ø 80 - 300 mm︱fixed steady: Ø 50 - 300 mm︱fixed steady: Ø 270 - 520 mm︱3-axis digital readout ︱
            turning diameter over bed 890 mm
            turning diameter over slide rest 490 mm
            turning length 3000 mm
            centre height 400 mm
            spindle passage Ø 155 mm
            turning dia. in gap 1060 mm
            bed width 700 mm
            turning speed range 3,7 - 1000 U/min
            number of turning speeds ranges 4
            number of feeds 160
            feeds - longitudinal 0,032 - 38,9 mm/U
            feeds - cross 0,016 - 19,45 mm/U
            tailstock taper MT 6
            tailstock quill diameter 125 mm
            tailstock quill stroke 250 mm
            faceplate with 4 clamps dia. 700 mm
            with live steady Ø 80 - 300 mm
            fixed steady: Ø 50 - 300 mm
            fixed steady: Ø 270 - 520 mm
            Description :

          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathe - cycle-controlled PINACHO ST 225x1000

          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland
          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09171 · Lathe - cycle-controlled

          PINACHO - ST 225x1000 - - 2018 - FAGOR 8055i

          Technical details
          turning diameter 450 mm︱turning length 1000 mm︱control FAGOR 8055i ︱centre height 225 mm︱bed width 300 mm︱spindle head DIN 55026/ Gr.6 ︱turning diameter over bed slide 370 ︱turning dia. over face-slide 260 mm︱spindle bore 65 mm︱spindle turning speed - stepless 1 - 3000 U/min︱tail stock ︱pinole diameter 68 mm︱quill stroke 200 mm︱taper in tailstock-quill MK 4 ︱total power requirement 10 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 2,6 x 1,2 x 1,9 m︱
          Model ST 225x1000 Manufactured according to DIN 8605 Spindle mount A2 DIN 55026 Feed rates Z, X: 0-7500 mm Standard version: Automatic 8-station tool turret VDI30 machine light, complete machine cover with chip tray instruction book, coolant device, servo spindle motor, automatic lubrication of the guides, Electronic handwheels for X and Z axes, CE compliant Accessories: hydraulic chuck Ø 250 pull cylinder with bore Ø 68 Hydraulic rice stick quill VDI 30 tool disc prepared for part catcher Chip conveyor
            turning diameter 450 mm
            turning length 1000 mm
            control FAGOR 8055i
            centre height 225 mm
            bed width 300 mm
            spindle head DIN 55026/ Gr.6
            turning diameter over bed slide 370
            turning dia. over face-slide 260 mm
            spindle bore 65 mm
            spindle turning speed - stepless 1 - 3000 U/min
            pinole diameter 68 mm
            quill stroke 200 mm
            taper in tailstock-quill MK 4
            total power requirement 10 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 2,6 x 1,2 x 1,9 m
            Description :
            Model ST 225x1000
            Manufactured according to DIN 8605
            Spindle mount A2 DIN 55026
            Feed rates Z, X: 0-7500 mm

            Standard version:
            Automatic 8-station tool turret VDI30
            machine light, complete machine cover with chip tray
            instruction book, coolant device,
            servo spindle motor, automatic lubrication of the guides,
            Electronic handwheels for X and Z axes, CE compliant
            Accessories:
            hydraulic chuck Ø 250 pull cylinder with bore Ø 68
            Hydraulic rice stick quill
            VDI 30 tool disc
            prepared for part catcher
            Chip conveyor
          Datasheet
          Request / Contact

          milling machining centers - horizontal

          used milling machining centers - horizontal MAZAK FH-7800

          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland
          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09163F · milling machining centers - horizontal

          MAZAK - FH-7800 - - 2001 - PC Fusion 640 M

          Technical details
          x-travel 1050 mm︱y-travel 800 mm︱z-travel 825 mm︱Control PC Fusion 640 M ︱size of pallet 800 x 630 mm︱table load 1,27 t︱table clamping surface: 24 x M16x2, Abstand 125 mm︱swivelling range 0,001° x 360000 Grad︱table height over floor 1250 mm︱Distance spindle nose - palett surface 200 - 1025 mm︱Distance spindle centre - table surface 50 - 850 mm︱feed range 1 - 40000 mm/min︱rapid travel x/y/z 40 m/min︱turning speed range 35 - 10000 U/min︱max. torque on the spindle 525 Nm︱power capacity - milling spindle 37 / 22 kW︱tool taper HSK 100 ︱chain magazin for tools 80 ︱diameter of tools max. 135 mm︱max. tool-dia with free toolbox 260 mm︱
            x-travel 1050 mm
            y-travel 800 mm
            z-travel 825 mm
            Control PC Fusion 640 M
            size of pallet 800 x 630 mm
            table load 1,27 t
            table clamping surface: 24 x M16x2, Abstand 125 mm
            swivelling range 0,001° x 360000 Grad
            table height over floor 1250 mm
            Distance spindle nose - palett s. 200 - 1025 mm
            Distance spindle centre - table . 50 - 850 mm
            feed range 1 - 40000 mm/min
            rapid travel x/y/z 40 m/min
            turning speed range 35 - 10000 U/min
            max. torque on the spindle 525 Nm
            power capacity - milling spindle 37 / 22 kW
            tool taper HSK 100
            chain magazin for tools 80
            diameter of tools max. 135 mm
            max. tool-dia with free toolbox 260 mm
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used milling machining centers - vertical MAZAK VC Smart 530 C

          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland
          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09152F · milling machining centers - vertical

          MAZAK - VC Smart 530 C - - 2016 - Mazatrol Matrix Nexus 2

          Technical details
          x-travel 1050 mm︱y-travel 530 mm︱z-travel 510 mm︱control Mazatrol Matrix Nexus 2 ︱spindle taper SK 40 ︱turning speed range 40 - 12.000 U/min︱rapid travel x/y/z 42.000 mm/min︱distance spindle /table max. 660 mm︱distance spindle /table min. 150 mm︱distance spindle center to column 586 mm︱tool change unit ︱no. of tools in the magazine 30 Stück︱tool taper CAT 40 ︱wotkpiece diameter with 2 vacant positions 80 mm︱max. tool weight 8 kg︱max. tool length 350 mm︱change-time chip to chip 2,8 sec︱table: ︱table length 1300 mm︱table width 550 mm︱
            x-travel 1050 mm
            y-travel 530 mm
            z-travel 510 mm
            control Mazatrol Matrix Nexus 2
            spindle taper SK 40
            turning speed range 40 - 12.000 U/min
            rapid travel x/y/z 42.000 mm/min
            distance spindle /table max. 660 mm
            distance spindle /table min. 150 mm
            distance spindle center to colum. 586 mm
            no. of tools in the magazine 30 Stück
            tool taper CAT 40
            wotkpiece diameter with 2 vacant. 80 mm
            max. tool weight 8 kg
            max. tool length 350 mm
            change-time chip to chip 2,8 sec
            table length 1300 mm
            table width 550 mm
          Datasheet
          Request / Contact

          Section Shear - Combined

          used Section Shear - Combined PEDDINGHAUS Peddiworker 500

          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland
          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09166F · Section Shear - Combined

          PEDDINGHAUS - Peddiworker 500 - - 1991 -

          Technical details
          round bar steel 32 mm︱square edge steel 30 mm︱L-beam 80 x 8 mm︱hole punhing press: pressure 50 t︱hole punching press: throat 155 mm︱hole punching press: max. length of stroke 10 - 28 mm︱hole punching press: capacity (dia. x thick.) Ø27 in 14 mm︱work height max. 1024 mm︱shear: flat material 190 x 10 mm︱shear: length of knifes 200 mm︱Working height 705 mm︱adjustment of stroke 10 - 28 mm︱oil volume 40 l︱total power requirement 4 kW︱weight of the machine ca. 0,84 t︱dimensions of the machine ca. 0,65 x 1,2 x 1,67 m︱
          Hydraulic Section Shear - Combined
            round bar steel 32 mm
            square edge steel 30 mm
            L-beam 80 x 8 mm
            hole punhing press: pressure 50 t
            hole punching press: throat 155 mm
            hole punching press: max. length. 10 - 28 mm
            hole punching press: capacity (d. Ø27 in 14 mm
            work height max. 1024 mm
            shear: flat material 190 x 10 mm
            shear: length of knifes 200 mm
            Working height 705 mm
            adjustment of stroke 10 - 28 mm
            oil volume 40 l
            total power requirement 4 kW
            weight of the machine ca. 0,84 t
            dimensions of the machine ca. 0,65 x 1,2 x 1,67 m
            Description :
            Hydraulic Section Shear - Combined
          Datasheet
          Request / Contact
          used Section Shear - Combined PEDDINGHAUS Peddimaster 60/100 H

          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland
          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09165F · Section Shear - Combined

          PEDDINGHAUS - Peddimaster 60/100 H - - 1986 -

          Technical details
          round bar steel - mm︱square edge steel - mm︱L-beam 120 x 13 mm︱hole punhing press: pressure 60 t︱hole punching press: throat 510 mm︱hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm︱shear: flat material 500 x 14 mm︱shear: flat material 400 x 16 mm︱shear: flat material 180 x 20 mm︱shear: flat material 120 x 21 mm︱shear: flat material 100 x 22 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 1,8 x 0,9 x 1,8 m︱
          Hydraulic Section Shear - Combined
            round bar steel - mm
            square edge steel - mm
            L-beam 120 x 13 mm
            hole punhing press: pressure 60 t
            hole punching press: throat 510 mm
            hole punching press: capacity (d. Ø 27 in 17 mm
            shear: flat material 500 x 14 mm
            shear: flat material 400 x 16 mm
            shear: flat material 180 x 20 mm
            shear: flat material 120 x 21 mm
            shear: flat material 100 x 22 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 1,8 x 0,9 x 1,8 m
            Description :
            Hydraulic Section Shear - Combined
          Datasheet
          Request / Contact

          Wire Eroding Machine

          used Wire Eroding Machine MITSUBISHI MV2400R

          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland
          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09096F · Wire Eroding Machine

          MITSUBISHI - MV2400R - - 2016 - Advance M700

          Technical details
          table length 840 mm︱table width 640 mm︱ 1050 x 820 x 305 mm︱travel x / y / z 600 / 400 / 310 mm︱V-axis 150 mm︱U-axis 150 mm︱workpiece weight max. 1500 kg︱ampere A︱Control Advance M700 ︱wire dia. 0,1 - 0,3 mm︱total power requirement kW︱weight of the machine ca. ca. 4,1 t︱dimensions of the machine ca. m︱
          INCLUDED: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Intelligent AT - Automatic wire threading for Wire diameter 0.1 - 0.3 mm - Automatic fine hole search function - NUI Natural User Interface - Advance M700 controller - 3D CAD / CAM on board - Easy 3D setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - LLS - Long Life System - 10 kg wire station - 4-sided frame table - hardened - E.KO IONISER (loaner) - wire alignment block - wire chipper - Compressor cooler - Prepared for mcAnywhere Equipment: - DFS - ERGO-LUX Ergonomic workspace lighting through LED floodlights Two LED lights each 3 x 6 watts Version IP67 for use at the work area Housing anodised aluminum with reflector insert - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -
            table length 840 mm
            table width 640 mm
            1050 x 820 x 305 mm
            travel x / y / z 600 / 400 / 310 mm
            V-axis 150 mm
            U-axis 150 mm
            workpiece weight max. 1500 kg
            Control Advance M700
            wire dia. 0,1 - 0,3 mm
            weight of the machine ca. ca. 4,1 t
            Description :
            INCLUDED:
            - ODS - Optical Drive System
            - Tubular direct drives in XYUV axes
            - Linear scales in XYUV axes
            - Intelligent AT - Automatic wire threading for
            Wire diameter 0.1 - 0.3 mm
            - Automatic fine hole search function
            - NUI Natural User Interface - Advance M700 controller
            - 3D CAD / CAM on board
            - Easy 3D setup workpiece position detection
            - 5 controlled axes - prepared for additional axes
            - PFC - Precise Finish Circuit
            - LLS - Long Life System
            - 10 kg wire station
            - 4-sided frame table - hardened
            - E.KO IONISER (loaner)
            - wire alignment block
            - wire chipper
            - Compressor cooler
            - Prepared for mcAnywhere

            Equipment:
            - DFS
            - ERGO-LUX
            Ergonomic workspace lighting through LED floodlights
            Two LED lights each 3 x 6 watts
            Version IP67 for use at the work area
            Housing anodised aluminum with reflector insert


            - all dimensions, weight and performance data without obligation -

            Used machine without warranty

            - interim sale reserved -
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   
          Mager & Wedemeyer Werkzeugmaschinen GmbH 28309 Bremen Europaallee 24a Deutschland


          Contact Trader


            Mager & Wedemeyer Werkzeugmaschinen GmbH
           Europaallee 24a
            28309 Bremen
            Deutschland
            +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
            jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
            Contact person:
           

          Trader Profile



          Machine category


          Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Vertikal · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Leit- und Zugspindeldrehmaschine · Profilstahlschere - Kombiniert ·
          Compendium
          Logiciels
          Contenu des machines d'occasion
          Confidentialité
          SUIVEZ NOUS
          © 2000-2021, Logotech oHG · Logiciels et services Internet - Tous droits réservés