Réseau européen de revendeurs de machines de stockage

Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          MS Maschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe CONTUR SJ-470


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28230 · Center Lathe

          CONTUR - SJ-470 - - -

          Technical details
          WORKING RANGE TURNING ︱- swing diameter (max) 470 mm︱- turning diameter (max) 235 mm︱- worpiece length max. 1000 mm︱BED GAP / BRIDGE ︱- swing in gap 690 mm︱MAIN SPINDLE ︱- spindle bore diameter 58 mm︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 12 ︱- spindle diameter 58 mm︱SCREW CUTTING SPINDLE ︱- advance z-axis (min.) 0.05 mm/r︱- advance z-axis (max.) 0.82 mm/r︱- advance x-axis (min.) 0.02 mm/r︱- advance x-axis (max.) 0.4 mm/r︱TAILSTOCK ︱- taper: MK 4 ︱ELECTRICAL SPECIFICATIONS
          << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws
            - swing diameter (max) 470 mm
            - turning diameter (max) 235 mm
            - worpiece length max. 1000 mm
            - swing in gap 690 mm
            - spindle bore diameter 58 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 2000 /min
            - number of gears 12
            - spindle diameter 58 mm
            - advance z-axis (min.) 0.05 mm/r
            - advance z-axis (max.) 0.82 mm/r
            - advance x-axis (min.) 0.02 mm/r
            - advance x-axis (max.) 0.4 mm/r
            Description :
            << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>>
            The machine is available with peak widths from 760mm to 2000mm.
            This offer is a storage machine at a promotional price
            (Original price incl. These options: 28962.- )

            We will send you a non-binding offer with your desired specifications.
            -> Description as well as standard and special equipment can be found in the PDF file.

            This storage machine is equipped as follows:
            Including the following standard accessories, u. a .:
            - 3-way precision spindle with SKF (FAG) bearings
            - Spindle brake mechanically
            - Complete electrical equipment
            - Coolant device with rear splash guard
            and splash guard on the slide
            - Food protection
            - Shift rod with 3 adjustable cams
            - Solid grain tip
            - Covered tension spindle
            - Set of machine mounting plates
            - Machine lamp 24 V
            - Operating instructions with test report
            - CE conformity declaration

            Incl. Special accessories, u. a .:
            Article no. 5200 B
            Steel holder head B, type Multifix
            (without tool holder)

            Article no. 6405 DA3A-470-1000
            Digital Position Indicator ARBAH (Made in EU) 1
            for SJ-470 / 1000S, including counter, 3 scales,
            Stands, covers and mounting

            Article no. 5300 3544-250-6
            3 jaw lathe chucks BISON, steel body Ø 250 mm,
            Camlock D-6, concentric clamping, bore Ø 76 mm
            each with a set of one-piece turning and drilling jaws
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-520


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28231 · Center Lathe

          CONTUR - SJ-520 - - -

          Technical details
          WORKING RANGE TURNING / ︱- swing diameter (max) 520 mm︱- turning diameter (max) 260 mm︱- worpiece length max. 1500 mm︱MAIN SPINDLE ︱- spindle bore diameter 78 mm︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 12 ︱- spindle diameter 78 mm︱SCREW CUTTING SPINDLE ︱- advance z-axis (min.) 0.05 mm/r︱- advance z-axis (max.) 0.82 mm/r︱- advance x-axis (min.) 0.02 mm/r︱- advance x-axis (max.) 0.4 mm/r︱- pitch of spindle 6 mm︱TAILSTOCK ︱- sleeve diameter 68 mm︱- taper: MK 4 ︱ELECTRICAL SPECIFICATIONS
            WORKING RANGE TURNING /
            - swing diameter (max) 520 mm
            - turning diameter (max) 260 mm
            - worpiece length max. 1500 mm
            - spindle bore diameter 78 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 2000 /min
            - number of gears 12
            - spindle diameter 78 mm
            - advance z-axis (min.) 0.05 mm/r
            - advance z-axis (max.) 0.82 mm/r
            - advance x-axis (min.) 0.02 mm/r
            - advance x-axis (max.) 0.4 mm/r
            - pitch of spindle 6 mm
            - sleeve diameter 68 mm
          Datasheet
          Request / Contact
          used  Center Lathe TOS SV 18 R


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-39615 · Center Lathe

          TOS - SV 18 R - - -

          Technical details
          WORKING RANGE TURNING ︱- swing diameter (max) 380 mm︱- turning diameter (max) 215 mm︱- bar diameter (max) 41 mm︱- worpiece length max. 1000 mm︱- workpiece weight max. 300 kg︱MAIN SPINDLE ︱- spindle revolutions (min) 14 /min︱- spindle revolutions (max) 2800 /min︱TAILSTOCK ︱- sleeve stroke 120 mm︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2750 mm︱- space requirements -front/back- 1000 mm︱- total weight approx. 1900 kg︱
            - swing diameter (max) 380 mm
            - turning diameter (max) 215 mm
            - bar diameter (max) 41 mm
            - worpiece length max. 1000 mm
            - workpiece weight max. 300 kg
            - spindle revolutions (min) 14 /min
            - spindle revolutions (max) 2800 /min
            - sleeve stroke 120 mm
            - space requirements -left/right. 2750 mm
            - space requirements -front/back. 1000 mm
            - total weight approx. 1900 kg
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-760


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28885 · Center Lathe

          CONTUR - SJ-760 - - -

          Technical details
          turning diameter over bed 760 mm︱turning diameter over slide rest 540 mm︱turning length / mm︱ / 760 mm︱ 540 mm︱ 115 mm︱ 10 /min︱ 1000 /min︱ 12 11 kW︱ 0.05 mm/r︱ 0.82 mm/r︱ 0.02 mm/r︱ 0.4 mm/r︱ 32 85 mm︱
            turning diameter over bed 760 mm
            turning diameter over slide rest 540 mm
            turning length / mm
            /
            760 mm
            540 mm
            115 mm
            10 /min
            1000 /min
            12
            11 kW
            0.05 mm/r
            0.82 mm/r
            0.02 mm/r
            0.4 mm/r
            32
            85 mm
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-660


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28884 · Center Lathe

          CONTUR - SJ-660 - - -

          Technical details
          turning diameter over bed 660 mm︱turning diameter over slide rest 438 mm︱turning length / mm︱ 660 mm︱ 438 mm︱ 85 mm︱ 15 /min︱ 1500 /min︱ 12 11 kW︱ 0.05 mm/r︱ 0.82 mm/r︱ 0.02 mm/r︱ 0.4 mm/r︱ 32 85 mm︱
            turning diameter over bed 660 mm
            turning diameter over slide rest 438 mm
            turning length / mm
            660 mm
            438 mm
            85 mm
            15 /min
            1500 /min
            12
            11 kW
            0.05 mm/r
            0.82 mm/r
            0.02 mm/r
            0.4 mm/r
            32
            85 mm
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-430


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28229 · Center Lathe

          CONTUR - SJ-430 - - -

          Technical details
          turning diameter over bed 430 mm︱turning diameter over slide rest 215 mm︱turning length 760 mm︱ 430 mm︱ 215 mm︱ 58 mm︱ 20 /min︱ 2000 /min︱ 12 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 430 mm
            turning diameter over slide rest 215 mm
            turning length 760 mm
            430 mm
            215 mm
            58 mm
            20 /min
            2000 /min
            12
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-410


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-21235 · Center Lathe

          CONTUR - SJ-410 - - -

          Technical details
          turning diameter over bed 410 mm︱turning diameter over slide rest / mm︱turning length 760 mm︱ 410 mm︱ 58 mm︱ 20 /min︱ 2000 /min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 410 mm
            turning diameter over slide rest / mm
            turning length 760 mm
            410 mm
            58 mm
            20 /min
            2000 /min
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe MAZAK QT NEXUS 350 II


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-39032 · CNC Lathe

          MAZAK - QT NEXUS 350 II - - 2008 - MAZATROL MATRIX NEXU

          Technical details
          turning diameter 420 mm︱turning length 650 mm︱control MAZATROL MATRIX NEXU ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: inclined bed ︱- number of spindles 1 ︱- number of turrets 1 ︱- live positions: no ︱WORKING RANGE TURNING ︱- swing diameter (max) 750 mm︱- turning diameter (max) 420 mm︱- worpiece length max. 650 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 3300 /min︱TOOL MAGAZINE ︱- number of positions 12 ︱DIMENSIONS / WEIGHTS ︱- total weight approx. 7000 kg︱ATTACHMENTS (TURNING)
            turning diameter 420 mm
            turning length 650 mm
            control MAZATROL MATRIX NEXU
            - number of spindles 1
            - number of turrets 1
            - swing diameter (max) 750 mm
            - turning diameter (max) 420 mm
            - worpiece length max. 650 mm
            - spindle revolutions (max) 3300 /min
            - number of positions 12
            - total weight approx. 7000 kg
          Datasheet
          Request / Contact
          used  CNC Lathe SPINNER TC 65 MC


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40780 · CNC Lathe

          SPINNER - TC 65 MC - - 2003 - /

          Technical details
          turning diameter / mm︱turning length / mm︱control / ︱- number of spindles 1 ︱- number of turrets 1 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- swing diameter (max) 425 mm︱- turning diameter (max) 310 mm︱- worpiece length max. 700 mm︱MAIN SPINDLE ︱- c-axis: yes ︱COUNTER SPINDLE ︱- spindle revolutions (min) 4500 /min︱- drive power 16.5 kW︱X/Z SLIDE ︱- Z-axis travel 640 mm︱- X-axis travel 230 mm︱- rapid traverse Z 22.5 mm/min︱- rapid traverse X 15 mm/min︱
            turning diameter / mm
            turning length / mm
            control /
            - number of spindles 1
            - number of turrets 1
            - swing diameter (max) 425 mm
            - turning diameter (max) 310 mm
            - worpiece length max. 700 mm
            - spindle revolutions (min) 4500 /min
            - drive power 16.5 kW
            - Z-axis travel 640 mm
            - X-axis travel 230 mm
            - rapid traverse Z 22.5 mm/min
            - rapid traverse X 15 mm/min
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center MAS Multicut 500i


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-23 · CNC Turning- and Milling Center

          MAS - Multicut 500i - - 2015 - Siemens 840 D

          Technical details
          turning diameter 1030 mm︱turning length 1600 mm︱control Siemens 840 D ︱spindle bore 106 mm︱b-axis -120° /+105° °︱turning speed range - power take off spindle 3500 U/min︱speeds of universal milling head 12000 U/min︱milling spindle drive 22 kW︱y-travel 370 mm︱b-axis 0,001 °︱c-axis 360´ ︱c-axis 0,001´ ︱total power requirement 59/74 kW︱weight of the machine ca. 23 t︱dimensions of the machine ca. 5,4 x 3,9 x 3,8 m︱
            turning diameter 1030 mm
            turning length 1600 mm
            control Siemens 840 D
            spindle bore 106 mm
            b-axis -120° /+105° °
            turning speed range - power take. 3500 U/min
            speeds of universal milling head 12000 U/min
            milling spindle drive 22 kW
            y-travel 370 mm
            b-axis 0,001 °
            c-axis 360´
            c-axis 0,001´
            total power requirement 59/74 kW
            weight of the machine ca. 23 t
            dimensions of the machine ca. 5,4 x 3,9 x 3,8 m
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center INDEX ABC 65


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40948 · CNC Turning- and Milling Center

          INDEX - ABC 65 - - 2014 - /

          Technical details
          turning diameter 65 mm︱turning length / mm︱control / ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 2 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 65 mm︱- bar diameter (max) 65 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 6000 /min︱- drive power 4.2 kW︱- spindle torque 10 Nm︱COUNTER SPINDLE ︱- spindle revolutions (max) 6000 /min︱- drive power S6 40% 20 kW︱- drive power S6 40% 27 kW︱- spindle torque S6 40% 105 Nm︱- spindle torque S1 100% 145 Nm︱
            turning diameter 65 mm
            turning length / mm
            control /
            - number of spindles 2
            - number of turrets 2
            - turning diameter (max) 65 mm
            - bar diameter (max) 65 mm
            - spindle revolutions (min) 6000 /min
            - drive power 4.2 kW
            - spindle torque 10 Nm
            - spindle revolutions (max) 6000 /min
            - drive power S6 40% 20 kW
            - drive power S6 40% 27 kW
            - spindle torque S6 40% 105 Nm
            - spindle torque S1 100% 145 Nm
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK INTEGREX J 200


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40768 · CNC Turning- and Milling Center

          MAZAK - INTEGREX J 200 - - 2013 - MAZATROL MATRIX NEXUS 2

          Technical details
          turning diameter 500 mm︱turning length 500 mm︱control MAZATROL MATRIX NEXUS 2 ︱BASIC FUNCTIONS ︱- number of spindles 1 ︱- number of c-axes 1 ︱- number of y-axes 1 ︱- number of b-axes 1 ︱WORKING RANGE TURNING ︱- turning diameter (max) 500 mm︱- bar diameter (max) 51 mm︱- worpiece length max. 500 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 5000 /min︱- c-axis: yes ︱X/Z SLIDE ︱- Z-axis travel 550 mm︱- X-axis travel 450 mm︱- Y-axis travel 200 mm︱- - drive power 7.5 kW︱
            turning diameter 500 mm
            turning length 500 mm
            control MAZATROL MATRIX NEXUS 2
            - number of spindles 1
            - number of c-axes 1
            - number of y-axes 1
            - number of b-axes 1
            - turning diameter (max) 500 mm
            - bar diameter (max) 51 mm
            - worpiece length max. 500 mm
            - spindle revolutions (max) 5000 /min
            - Z-axis travel 550 mm
            - X-axis travel 450 mm
            - Y-axis travel 200 mm
            - - drive power 7.5 kW
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled FAT TUR 630MN


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-27 · Lathe - cycle-controlled

          FAT - TUR 630MN - - 2009 - SIEMENS 840D manual Turn

          Technical details
          turning diameter 610 mm︱turning length 2000 mm︱control SIEMENS 840D manual Turn︱swing diameter over slide rest 370 mm︱greates pass round over bed 630 mm︱turret (x-stations) 8 fach︱turning speeds 2-2500 U/min︱transmission ratio 2 ︱spindle bore 105 mm︱tool adaptor VDI-40 ︱rapid traverse longitudinal 8000 mm/min︱rapid traverse cross 6000 mm/min︱power feed longitudinal 15000 N︱power feed coss 10000 N︱tailstock quill taper MT 5 ︱tailstock quill diameter 90 mm︱tailstock quill stroke 200 mm︱total power requirement kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3700 x 2000 x 2000 mm︱
          This FAT TUR 630 cycle lathe is in very good condition and immediately available. Equipment: - Various tool holders - 8-fold tool turret - chip conveyor - bezel closed - 4-jaw face plate - VDI-40 holder changer - VDI-40 precision alignment mandrel
            turning diameter 610 mm
            turning length 2000 mm
            control SIEMENS 840D manual Turn
            swing diameter over slide rest 370 mm
            greates pass round over bed 630 mm
            turret (x-stations) 8 fach
            turning speeds 2-2500 U/min
            transmission ratio 2
            spindle bore 105 mm
            tool adaptor VDI-40
            rapid traverse longitudinal 8000 mm/min
            rapid traverse cross 6000 mm/min
            power feed longitudinal 15000 N
            power feed coss 10000 N
            tailstock quill taper MT 5
            tailstock quill diameter 90 mm
            tailstock quill stroke 200 mm
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3700 x 2000 x 2000 mm
            Description :
            This FAT TUR 630 cycle lathe is in very good condition and immediately
            available.
            Equipment:
            - Various tool holders
            - 8-fold tool turret
            - chip conveyor
            - bezel closed
            - 4-jaw face plate
            - VDI-40 holder changer
            - VDI-40 precision alignment mandrel
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled MAWITEC TURNSTAR II


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-29616 · Lathe - cycle-controlled

          MAWITEC - TURNSTAR II - - 1998 - HEIDENHAIN MANUAL PLUS

          Technical details
          turning diameter 210 mm︱turning length 1000 mm︱control HEIDENHAIN MANUAL PLUS ︱-------------------------------------------------- ︱WORKING RANGE TURNING ︱- swing diameter (max) 410 mm︱- turning diameter (max) 210 mm︱- bar diameter (max) 42 mm︱- worpiece length max. 1000 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 3400 /min︱- number of gears 2 ︱TAILSTOCK ︱- sleeve stroke 190 mm︱- sleeve diameter 55 mm︱- taper: MK 4 ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2400 mm︱- space requirements -front/back- 1600 mm︱
            turning diameter 210 mm
            turning length 1000 mm
            control HEIDENHAIN MANUAL PLUS
            - swing diameter (max) 410 mm
            - turning diameter (max) 210 mm
            - bar diameter (max) 42 mm
            - worpiece length max. 1000 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 3400 /min
            - number of gears 2
            - sleeve stroke 190 mm
            - sleeve diameter 55 mm
            - space requirements -left/right. 2400 mm
            - space requirements -front/back. 1600 mm
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled VOEST ALPINE STEINEL W570


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-37918 · Lathe - cycle-controlled

          VOEST ALPINE STEINEL - W570 - - 1990 - ELESTA

          Technical details
          turning diameter 340 mm︱turning length 1000 mm︱control ELESTA ︱-------------------------------------------------- ︱WORKING RANGE TURNING ︱- swing diameter (max) 570 mm︱- turning diameter (max) 340 mm︱- worpiece length max. 1000 mm︱- workpiece weight max. 1000 kg︱MAIN SPINDLE ︱- spindle revolutions (min) 85 /min︱- spindle revolutions (max) 2500 /min︱X/Z SLIDE ︱- tool fixture: Steel Holder ︱TAILSTOCK ︱- sleeve stroke 160 mm︱- sleeve diameter 70 mm︱- taper: MK 5 ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2700 mm︱
            turning diameter 340 mm
            turning length 1000 mm
            control ELESTA
            - swing diameter (max) 570 mm
            - turning diameter (max) 340 mm
            - worpiece length max. 1000 mm
            - workpiece weight max. 1000 kg
            - spindle revolutions (min) 85 /min
            - spindle revolutions (max) 2500 /min
            - sleeve stroke 160 mm
            - sleeve diameter 70 mm
            - space requirements -left/right. 2700 mm
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled CONTUR DIALOG H-66


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-8360 · Lathe - cycle-controlled

          CONTUR - DIALOG H-66 - - - SIEMENS 840 D + SHOPTURN

          Technical details
          turning diameter 660 mm︱turning length / mm︱control SIEMENS 840 D + SHOPTURN 660 mm︱ 400 mm︱ 105 mm︱ 2 /min︱ 2500 /min︱ 2 18.8 kW︱ 21000 Nm︱ 5 mm/min︱ 3200 mm/min︱ 5 mm/min︱ 3200 mm/min︱ 8000 mm/min︱ 8000 mm/min︱
            turning diameter 660 mm
            turning length / mm
            control SIEMENS 840 D + SHOPTURN
            660 mm
            400 mm
            105 mm
            2 /min
            2500 /min
            2
            18.8 kW
            21000 Nm
            5 mm/min
            3200 mm/min
            5 mm/min
            3200 mm/min
            8000 mm/min
            8000 mm/min
          Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe STAR ECAS 32T


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38274 · Turning Automatic Lathe - swiss lathe

          STAR - ECAS 32T - - 2005 -

          Technical details
          turning diameter over bed / mm︱spindle passage 32 mm︱turning length / mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 2 ︱- spdl. indexing device: yes ︱- live positions: yes ︱- number of c-axes 2 ︱- number of y-axes 3 ︱WORKING RANGE TURNING ︱- bar diameter (max) 32 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 7000 /min︱- drive power 5.5 kW︱- c-axis: yes ︱COUNTER SPINDLE ︱- spindle revolutions (max) 7000 /min︱
            turning diameter over bed / mm
            spindle passage 32 mm
            turning length / mm
            - number of spindles 2
            - number of turrets 2
            - number of c-axes 2
            - number of y-axes 3
            - bar diameter (max) 32 mm
            - spindle revolutions (max) 7000 /min
            - drive power 5.5 kW
            - spindle revolutions (max) 7000 /min
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe TRAUB TNK 36


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38209 · Turning Automatic Lathe - swiss lathe

          TRAUB - TNK 36 - - 2002 -

          Technical details
          turning diameter over bed / mm︱spindle passage 36 mm︱turning length / mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 1 ︱- live positions: yes ︱- number of c-axes 2 ︱- number of y-axes 2 ︱WORKING RANGE TURNING ︱- bar diameter (max) 36 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 6300 /min︱- drive power S6 40% 10.7 kW︱COUNTER SPINDLE ︱- spindle revolutions (max) 6300 /min︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 400 V︱
            turning diameter over bed / mm
            spindle passage 36 mm
            turning length / mm
            - number of spindles 2
            - number of turrets 1
            - number of c-axes 2
            - number of y-axes 2
            - bar diameter (max) 36 mm
            - spindle revolutions (min) 6300 /min
            - drive power S6 40% 10.7 kW
            - spindle revolutions (max) 6300 /min
            - mains voltage 400 V
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe TRAUB TNK 28


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38259 · Turning Automatic Lathe - swiss lathe

          TRAUB - TNK 28 - - 1999 -

          Technical details
          turning diameter over bed / mm︱spindle passage 28 mm︱turning length 3000 mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of turrets 2 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 28 mm︱- bar diameter (max) 28 mm︱- worpiece length max. 3000 mm︱MAIN SPINDLE ︱- c-axis: yes ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2600 mm︱- space requirements -front/back- 2400 mm︱- total height 1700 mm︱ATTACHMENTS (TURNING) ︱- - bar length (max) 3000 mm︱- - bar diameter (max) 28 mm︱
            turning diameter over bed / mm
            spindle passage 28 mm
            turning length 3000 mm
            - number of turrets 2
            - turning diameter (max) 28 mm
            - bar diameter (max) 28 mm
            - worpiece length max. 3000 mm
            - space requirements -left/right. 2600 mm
            - space requirements -front/back. 2400 mm
            - total height 1700 mm
            - - bar length (max) 3000 mm
            - - bar diameter (max) 28 mm
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column SCHIESS KE 125


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-39941 · Vertical Turret Lathe - Single Column

          SCHIESS - KE 125 - - 1958 -

          Technical details
          MAIN SPINDLE ︱- spindle revolutions (min) 4.8 /min︱- spindle revolutions (max) 237 /min︱FACING PLATE (TURNING MACHINE) ︱- diameter of surface plate 1250 mm︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2850 mm︱- space requirements -front/back- 2700 mm︱- total height 3100 mm︱- total weight approx. 16000 kg︱
            - spindle revolutions (min) 4.8 /min
            - spindle revolutions (max) 237 /min
            - diameter of surface plate 1250 mm
            - space requirements -left/right. 2850 mm
            - space requirements -front/back. 2700 mm
            - total height 3100 mm
            - total weight approx. 16000 kg
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column CKD BLANSKO SKJ 32/63


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-37932 · Vertical Turret Lathe - Single Column

          CKD BLANSKO - SKJ 32/63 - - -

          Technical details
          faceplate diameter 3200 mm︱swing diameter 6300 mm︱turning height / mm︱ 6300 mm︱ 2500 mm︱ 50000 kg︱ 0.8 /min︱ 80 /min︱ 92 kW︱ 130000 Nm︱ 3200 mm︱ 1900 mm︱ 1600 mm︱ 2200 mm︱
          This carousel lathe is completely overhauled, only the basic elements were used, everything else is NEW. The machine can be viewed under power and is in the state like a NEW machine
            faceplate diameter 3200 mm
            swing diameter 6300 mm
            turning height / mm
            6300 mm
            2500 mm
            50000 kg
            0.8 /min
            80 /min
            92 kW
            130000 Nm
            3200 mm
            1900 mm
            1600 mm
            2200 mm
            Description :
            This carousel lathe is completely overhauled, only the basic elements were used, everything else is NEW.
            The machine can be viewed under power and is in the state like a NEW machine
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal FOM INDUSTRIE DALI 70


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40918 · Machining Center - Universal

          FOM INDUSTRIE - DALI 70 - - 2017 -

          Technical details
          x travel 7270 mm︱y travel 1040 mm︱z travel 430 mm︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 4 ︱- X-axis travel 7270 mm︱- Y-axis travel 1040 mm︱- Z-axis travel 430 mm︱MILLING SPINDLE / HEAD ︱- tool fixture: ISO BT 30 ︱TOOL MAGAZINE ︱- number of positions 14 ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 8676 mm︱- space requirements -front/back- 2051 mm︱- total height 2341 mm︱- total weight approx. 4200 kg︱ATTACHMENTS ︱- European CE standards: yes
          Machining center for aluminum and PVC, very good condition to see under power. TECHNICAL FEATURES AXLE LIFTS Axis X longitudinal stroke mm 7,270 Y axis cross stroke mm 1,040 Z axis vertical stroke mm 430 Axis A rotation of the electrospindle -15 ° / 195 WORKING CAPACITY Axis X working area in the longitudinal direction mm 7,000 Axis Y working area in the transverse direction with electrospindle 90 ° mm 220 Axis Y working area in the transverse direction with electrospindle 0 ° / 90 ° mm 200 Axis Y working area in the transverse direction with electrospindle 90 ° / 180 ° mm 220 Axis Y working area in the transverse direction with electrospindle 0 ° / 180 ° mm 200 Z axis Vertical working range mm 200 With 150 mm tool (page 6 AXLE SHIFT Axis X rapid shift m / 1 ?90 90 acceleration m / s2 4 Axis Y rapid shift m / 1 ?30 30 acceleration m / s2 2 Z axis rapid displacement m / 1 ?13 13 acceleration m / s2 0.6 Axis A speed of the electrospindle ° / sec 180 ELECTRIC SPINDLE Cone ISO 30DIN 69871 Max power kW 6.5 Rotation speed rpm 19.00 MAGAZINE Suitable tools n ° 7 (10 opt.) Time to change the tool from the end of the first until the start of the second processing sec. 14 Max weight of tools Kg 5 Max length of tools mm 100 Max diameter of the (Zilyndrische milling machine) mm 50 Max diameter of the (disc cutter) mm 200 DIMENSIONS Length mm 8,675 Width mm 2,051 Height mm 2,341 Weight Kg 4,200
            x travel 7270 mm
            y travel 1040 mm
            z travel 430 mm
            - number of processing axes (exc. 4
            - X-axis travel 7270 mm
            - Y-axis travel 1040 mm
            - Z-axis travel 430 mm
            - number of positions 14
            - space requirements -left/right. 8676 mm
            - space requirements -front/back. 2051 mm
            - total height 2341 mm
            - total weight approx. 4200 kg
            Description :
            Machining center for aluminum and PVC, very good condition to see under power.

            TECHNICAL FEATURES
            AXLE LIFTS
            Axis X longitudinal stroke mm 7,270
            Y axis cross stroke mm 1,040
            Z axis vertical stroke mm 430
            Axis A rotation of the electrospindle -15 ° / 195

            WORKING CAPACITY
            Axis X working area in the longitudinal direction mm 7,000
            Axis Y working area in the transverse direction with electrospindle 90 ° mm 220
            Axis Y working area in the transverse direction with electrospindle 0 ° / 90 ° mm 200
            Axis Y working area in the transverse direction with electrospindle 90 ° / 180 ° mm 220
            Axis Y working area in the transverse direction with electrospindle 0 ° / 180 ° mm 200
            Z axis Vertical working range mm 200
            With 150 mm tool (page 6

            AXLE SHIFT
            Axis X rapid shift m / 1 ?90 90 acceleration m / s2 4
            Axis Y rapid shift m / 1 ?30 30 acceleration m / s2 2
            Z axis rapid displacement m / 1 ?13 13 acceleration m / s2 0.6
            Axis A speed of the electrospindle ° / sec 180

            ELECTRIC SPINDLE
            Cone ISO 30DIN 69871
            Max power kW 6.5
            Rotation speed rpm 19.00

            MAGAZINE
            Suitable tools n ° 7 (10 opt.)
            Time to change the tool from the end of the first
            until the start of the second processing sec. 14
            Max weight of tools Kg 5
            Max length of tools mm 100
            Max diameter of the (Zilyndrische milling machine) mm 50
            Max diameter of the (disc cutter) mm 200

            DIMENSIONS
            Length mm 8,675
            Width mm 2,051
            Height mm 2,341
            Weight Kg 4,200
          Datasheet
          Request / Contact
          used  Machining Center - Universal DMG DMC 105V linear


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-32 · Machining Center - Universal

          DMG - DMC 105V linear - - 2007 - HEIDENHAIN TNC i530

          Technical details
          x-travel 1050 mm︱y-travel 800 mm︱z-travel 560 mm︱Control HEIDENHAIN TNC i530 ︱workpiece weight 600 kg︱table surface area 1200 x 850 mm︱tool taper HSK-A 63 ︱spindle 25 / 35 kW︱spindle turning speed range 18000 U/min︱b-axis 10 °︱b-axis -110 °︱c-axis 360 ︱Number of axles 5 St.︱total power requirement kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 3800 x 2800 x 3200 m︱
          The machine is in very good condition and available immediately
            x-travel 1050 mm
            y-travel 800 mm
            z-travel 560 mm
            Control HEIDENHAIN TNC i530
            workpiece weight 600 kg
            table surface area 1200 x 850 mm
            tool taper HSK-A 63
            spindle 25 / 35 kW
            spindle turning speed range 18000 U/min
            b-axis 10 °
            b-axis -110 °
            c-axis 360
            Number of axles 5 St.
            weight of the machine ca. 12 t
            dimensions of the machine ca. 3800 x 2800 x 3200 m
            Description :
            The machine is in very good condition and available immediately
          Datasheet
          Request / Contact
          used  Machining Center - Universal TOS KURIM FSQ 100


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-39191 · Machining Center - Universal

          TOS KURIM - FSQ 100 - - 2001 -

          Technical details
          x travel 1600 mm︱y travel 1000 mm︱z travel 780 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 5 ︱- X-axis travel 1600 mm︱- Y-axis travel 1000 mm︱- Z-axis travel 780 mm︱TABLE ︱- table surface (left-right) 1000 mm︱- table surface (front-back) 1000 mm︱- workpiece load (max) 6000 kg︱- rotation axis: C ︱- - positioning/indexing 0.001 °︱MILLING SPINDLE / HEAD ︱- spindle type: tilting head ︱- - positioning/indexing 2.5 °︱- - positioning/indexing 2.5 °︱- spindle revolutions (max) 2500 /min︱
            x travel 1600 mm
            y travel 1000 mm
            z travel 780 mm
            - number of processing axes (exc. 5
            - X-axis travel 1600 mm
            - Y-axis travel 1000 mm
            - Z-axis travel 780 mm
            - table surface (left-right) 1000 mm
            - table surface (front-back) 1000 mm
            - workpiece load (max) 6000 kg
            - - positioning/indexing 0.001 °
            - - positioning/indexing 2.5 °
            - - positioning/indexing 2.5 °
            - spindle revolutions (max) 2500 /min
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

            Profil de commerçant: MS Maschinenhandel GmbH

          Contacter le commerçant



            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 Ladis
            Autriche
            + 43 (0) 5472 219 07 "> + 43 (0) 5472 219 07
            + 43 (0) 5472 219 07 22
            info@ms-maschinen.at
            www.ms-maschinen.at

          Profil de commerçant

          Groupe ProdEq - Partenaire de l'industrie.
          Commerce de gros de machines à métaux.
           
          Nous vendons et achetons:
          • des machines-outils
          • machines de fabrication des métaux
          • équipements industriels d'occasion
          • plantes complètes
          Internationalité :
          Nos réseau de vente international permet d'accéder aux marchés mondiaux des machines d'occasion / d'occasion.


          Annuaire de machines en ligne:
          Recherchez et trouvez votre équipement et votre machine-outil souhaités (CNC ou non) dans notre annuaire en ligne. Toutes les machines à vendre sont publiées avec des informations complètes.

          Grands projets - petits projets:
          Nous réalisons des ventes aux enchères et des liquidations et réalisons la vente de vos équipements excédentaires. Veuillez nous contacter pour toute vente à venir d'actif excédentaire. Nous échangeons machines simples ainsi que installations industrielles complètes.

          Expertise:
          Peu importe si vous vendez ou achetez des machines ou des équipements d'occasion. Basez votre décision de vente sur notre évaluation et votre décision d'achat sur notre conseil technique.

          Plus que d'occasion:
          Nous négocions également un portefeuille sélectionné de nouvel équipement, Il suffit de nous le demander.


          Commerce et service:
          Demandez des services après-vente comme le démontage, les révisions, le transport, l'importation et l'exportation et le financement.

          Machines et équipement:


          ProdEq Trading GmbH
          Expert comptable 1, 9527 Niederhelfenschwil, Suisse


          ProdEq Maschinenhandel GmbH
          Unterdorf 34, 6532 Ladis, Autriche


          ProdEq Germany GmbH
          Weberweg 2, 42499 Hückeswagen, Allemagne


          Post-Venta Carreras SA
          Pol. Els Plans d'Arau, C / Nicolau Copèrnic 2, 08787 La Pobla de Claramunt, Espagne


          Guerrieri srl
          Piazza Giosuè Carducci 6, 21100 Varese (VA), Italie


          ProdEq doo Trgovina z industrijskimi stroji
          Opekarniska 4, course 2327, Slovénie


          Bureau de représentation ProdEq Maschinenhandel GmbH
          16110 Nilüfer / Bursa, Turquie


          Autres bureaux de représentation: Mexique, Iran
          Veuillez contacter l’un des bureaux ProdEq ci-dessus pour plus d’informations.




          MS Maschinenhandel GmbH   6532 Ladis Unterdorf 34 Österreich
          MS Maschinenhandel GmbH

          Unterdorf 34



          Contact Trader


            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 Ladis
            Österreich
            +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
            info@ms-maschinen.at
            www.ms-maschinen.at
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Aufspannplatte · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Drehmaschine - zyklengesteuert · Fahrständerfräsmaschine · Feinstanzpresse · Fräsmaschine - Universal · Honmaschine - Innen - Horizontal · Hydraulische - Abkantpresse · Hydraulische - Tafelschere · Innenschleifmaschine · Karusselldrehmaschine - Einständer · Koordinatenmeßmaschine · Kühlmittelanlage · Langdrehautomat · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Meßmittel · Portal - Bearbeitungszentrum · Portalfräsmaschine · Radialbohrmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Schweißmaschinen · Sonstige Fördertechnik · Stangenlader · Stanzautomat · Tafelschere - hydraulisch · Tischbohrwerk · Werkzeugwechselwagen ·