Réseau européen de revendeurs de machines de stockage

Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Leyendecker & Hollmann GmbH Werkzeugmaschinen - Machine Tools - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe BOEHRINGER DUE 500


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02985 · Center Lathe

          BOEHRINGER - DUE 500 - - 1990 -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 285 mm︱turning length 1000 mm︱spindle bore diameter 62 mm︱mainspindle: turning speeds 11,2-2240 U/min︱feed (longitudinal) 0,063-56 mm/U︱feed (face) 0,0315-28 mm/U︱bed width 360 mm︱diameter of quill 80 mm︱power capacity 11 kW︱workpiece weight 500 kg︱Main drive 11 kW︱weight of the machine ca. ca. 2,8 t︱dimensions of the machine ca. 3,5 x 1.44 x 1,342 m︱
          Equipment/Accessories: - 3 axis D.R.O - pnematic chuck - 3-times chuck - 4-times chuck - 1 steady rest (workpiece weight with one steady rest) - documentation
            turning diameter over bed 500 mm
            turning diameter over slide rest 285 mm
            turning length 1000 mm
            spindle bore diameter 62 mm
            mainspindle: turning speeds 11,2-2240 U/min
            feed (longitudinal) 0,063-56 mm/U
            feed (face) 0,0315-28 mm/U
            bed width 360 mm
            diameter of quill 80 mm
            power capacity 11 kW
            workpiece weight 500 kg
            Main drive 11 kW
            weight of the machine ca. ca. 2,8 t
            dimensions of the machine ca. 3,5 x 1.44 x 1,342 m
            Description :
            Equipment/Accessories:
            - 3 axis D.R.O
            - pnematic chuck
            - 3-times chuck
            - 4-times chuck
            - 1 steady rest (workpiece weight with one steady rest)
            - documentation



          14.000 €
          Datasheet
          Request / Contact
          used  Center Lathe VDF-WOHLENBERG M850x3000


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03087 · Center Lathe

          VDF-WOHLENBERG - M850x3000 - - 1965 -

          Technical details
          turning diameter over bed 850 mm︱turning diameter over slide rest 620 mm︱turning length 4200 mm︱distance between centres 3000 mm︱turning speed range - faceplate 4,5 - 900 1/min︱turning speed range - chuck 4,5 - 900 1/min︱chucking diameter 800 mm︱engine output 22 kW︱
          Equipment / Accessories: - faceplate - steady rest - various accessories
            turning diameter over bed 850 mm
            turning diameter over slide rest 620 mm
            turning length 4200 mm
            distance between centres 3000 mm
            turning speed range - faceplate 4,5 - 900 1/min
            turning speed range - chuck 4,5 - 900 1/min
            chucking diameter 800 mm
            engine output 22 kW
            Description :
            Equipment / Accessories:
            - faceplate
            - steady rest
            - various accessories
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center WFL-MILLTURN M100 x 5000


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02958 · CNC Turning- and Milling Center

          WFL-MILLTURN - M100 x 5000 - - 1998 - Sinumerik 840 C

          Technical details
          turning diameter 910 mm︱turning length 4990 mm︱control Sinumerik 840 C︱turnind diameter between the tips 850 mm︱swing diameter over bed slide 850 mm︱longitudinal traverse (z-axis) 5370 mm︱cross movement. (x-axis) 900 mm︱spindle diameter in front bearing 240 mm︱spindle bore 165 mm︱spindle turning speed range max. 1600 U/min︱max. torque 4724 Nm︱feed capacity - z 30 kN︱feed capacity - x 31,5 kN︱feed capacity - y 20 kN︱rapid travel speed z-axis 15 m/min︱rapid travel speed x-axis 15 m/min︱rapid travel speed y-axis 12,5 U/min.︱Main drive 63 kW︱tailstock quill diameter 180 mm︱tailstock quill stroke 200 mm︱
          accessories/ equipment: - 108 times ATC - collet chuck Hainbuch with collete chucks - hydraulical steady rest SMW SLU-5, 50 - 310 mm - Coolant device and chip conveyor
            turning diameter 910 mm
            turning length 4990 mm
            control Sinumerik 840 C
            turnind diameter between the tip. 850 mm
            swing diameter over bed slide 850 mm
            longitudinal traverse (z-axis) 5370 mm
            cross movement. (x-axis) 900 mm
            spindle diameter in front bearin. 240 mm
            spindle bore 165 mm
            spindle turning speed range max. 1600 U/min
            max. torque 4724 Nm
            feed capacity - z 30 kN
            feed capacity - x 31,5 kN
            feed capacity - y 20 kN
            rapid travel speed z-axis 15 m/min
            rapid travel speed x-axis 15 m/min
            rapid travel speed y-axis 12,5 U/min.
            Main drive 63 kW
            tailstock quill diameter 180 mm
            tailstock quill stroke 200 mm
            Description :
            accessories/ equipment:

            - 108 times ATC
            - collet chuck Hainbuch with collete chucks
            - hydraulical steady rest SMW SLU-5, 50 - 310 mm
            - Coolant device and chip conveyor
          164.000 €
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used  Heavy Duty Lathe TACCHI HD4/ 1400x10000 Serie 230 LS


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02879 · Heavy Duty Lathe

          TACCHI - HD4/ 1400x10000 Serie 230 LS - - 2002 - Sinumerik 840D

          Technical details
          turning diameter over bed 2400 mm︱turning diameter over slide rest 2200 mm︱turning length 10000 mm︱Control Sinumerik 840D ︱centre height 1500 mm︱spindle bore 160 mm︱max. workpiece weight 60 t︱max. torque 110000 Nm︱main drive 100 kW︱total power requirement 145 kW︱
          Machine is in a first class condition. Faceplate dia. 1970 mm, dia. clamping area upto 1800 mm Turning speed range in 3 steps: 1 - 300 rpm Constant capacity in turning speed range: 11 - 300 rpm Equipment / Accessories: - faceplate with clamping jaws - roller block - "C"-steady rest 300 - 1000 mm - "C"-steady rest 900 - 1400 mm - bridge steady rest 900 - 2000 mm - boring bar support max. 250 mm dia. - chip conveyor with paper band filter - documentation
            turning diameter over bed 2400 mm
            turning diameter over slide rest 2200 mm
            turning length 10000 mm
            Control Sinumerik 840D
            centre height 1500 mm
            spindle bore 160 mm
            max. workpiece weight 60 t
            max. torque 110000 Nm
            main drive 100 kW
            total power requirement 145 kW
            Description :
            Machine is in a first class condition.

            Faceplate dia. 1970 mm, dia. clamping area upto 1800 mm
            Turning speed range in 3 steps: 1 - 300 rpm
            Constant capacity in turning speed range: 11 - 300 rpm

            Equipment / Accessories:
            - faceplate with clamping jaws
            - roller block
            - "C"-steady rest 300 - 1000 mm
            - "C"-steady rest 900 - 1400 mm
            - bridge steady rest 900 - 2000 mm
            - boring bar support max. 250 mm dia.
            - chip conveyor with paper band filter
            - documentation
          490.000 €
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe SKODA SUA 125 P


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02864 · Heavy Duty Lathe

          SKODA - SUA 125 P - - 1987 -

          Technical details
          turning diameter over slide rest 950 mm︱turning diameter over bed 1320 mm︱turning length 12000 mm︱max. torque 35000 Nm︱centre height 660 mm︱swing diameter 1320 mm︱clamping diameter 1200 mm︱max. workpiece weight between centres 14000 kg︱workpiece weight with 1 steady rest 21000 kg︱weight ca. 23.100 kg︱output 55 kw︱
          Partial overhaul in 2006 including new electrics, wiring and control cabinet Equipment / accessories: - steady rest I: Ø 200-630 mm - steady rest II: roller block 10 t, Ø 500-930 mm - Chip conveyor (Buerener with swivel slide) - Heidenhain digital display 2 axes - coolant system
            turning diameter over slide rest 950 mm
            turning diameter over bed 1320 mm
            turning length 12000 mm
            max. torque 35000 Nm
            centre height 660 mm
            swing diameter 1320 mm
            clamping diameter 1200 mm
            max. workpiece weight between ce. 14000 kg
            workpiece weight with 1 steady r. 21000 kg
            weight ca. 23.100 kg
            output 55 kw
            Description :
            Partial overhaul in 2006 including new electrics, wiring and control cabinet

            Equipment / accessories:
            - steady rest I: Ø 200-630 mm
            - steady rest II: roller block 10 t, Ø 500-930 mm
            - Chip conveyor (Buerener with swivel slide)
            - Heidenhain digital display 2 axes
            - coolant system
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe SKODA SUA 125 P


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02863 · Heavy Duty Lathe

          SKODA - SUA 125 P - - 1984 -

          Technical details
          turning diameter over slide rest 950 mm︱turning diameter over bed 1320 mm︱turning length 11000 mm︱max. torque 35000 Nm︱centre height 660 mm︱swing diameter 1320 mm︱clamping diameter 1200 mm︱max. workpiece weight between centres 14000 kg︱workpiece weight with 1 steady rest 21000 kg︱output 55 kw︱weight ca. 22.300 kg︱
          Partly reconditioned in 2006, incl. new electrics, wires and electrical cabinet Equipment / Accessories: - steady rest I: diameter 200-630 mm - Heidenhain digital display 2 axes - documentation
            turning diameter over slide rest 950 mm
            turning diameter over bed 1320 mm
            turning length 11000 mm
            max. torque 35000 Nm
            centre height 660 mm
            swing diameter 1320 mm
            clamping diameter 1200 mm
            max. workpiece weight between ce. 14000 kg
            workpiece weight with 1 steady r. 21000 kg
            output 55 kw
            weight ca. 22.300 kg
            Description :
            Partly reconditioned in 2006, incl. new electrics, wires and electrical cabinet

            Equipment / Accessories:
            - steady rest I: diameter 200-630 mm
            - Heidenhain digital display 2 axes
            - documentation
          52.000 €
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled KERN-DMT CD 1100


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03077 · Lathe - cycle-controlled

          KERN-DMT - CD 1100 - - 2014 - Heidenhain MANUALplus 620

          Technical details
          turning diameter 1100 mm︱turning length 6000 mm︱control Heidenhain MANUALplus 620︱greates pass round over bed 1120 mm︱Swing diameter over cross slide 820 ︱slide travel facial 600 mm︱max. turning diameter over bed with Multifix/Parat 110 mm︱max. turning diameter over bed with revolver 1000 mm︱spindle diameter in front bearing 190 mm︱spindle bore 132 mm︱spindle taper 140 metr︱main spindle drive at 60% ED 46 kW︱Speed range - up to 1-1800 U/min︱feed range - face slide / stepless 0,001-1000 mm/U︱feed range - longitudinal slide /stepless 0,001-2000 mm/U︱thread pitch min. 0,01 mm︱thread pitch max. 999,9 mm︱rapid travel - longitudinal/face 10/5 m/min︱diameter of quill 125 mm︱quill travel 280 mm︱
          CNC-Lathe, cycle-controlled, with manual tool carrier - only 490 connected hours Equipment / Accessories: - ZF drive, 2 steps - automatic central lubrication - chip conveyor - 2 pcs. steady rests - various Multifix steel holders - documentation
            turning diameter 1100 mm
            turning length 6000 mm
            control Heidenhain MANUALplus 620
            greates pass round over bed 1120 mm
            Swing diameter over cross slide 820
            slide travel facial 600 mm
            max. turning diameter over bed w. 110 mm
            max. turning diameter over bed w. 1000 mm
            spindle diameter in front bearin. 190 mm
            spindle bore 132 mm
            spindle taper 140 metr
            main spindle drive at 60% ED 46 kW
            Speed range - up to 1-1800 U/min
            feed range - face slide / steple. 0,001-1000 mm/U
            feed range - longitudinal slide . 0,001-2000 mm/U
            thread pitch min. 0,01 mm
            thread pitch max. 999,9 mm
            rapid travel - longitudinal/face 10/5 m/min
            diameter of quill 125 mm
            quill travel 280 mm
            Description :
            CNC-Lathe, cycle-controlled, with manual tool carrier
            - only 490 connected hours

            Equipment / Accessories:
            - ZF drive, 2 steps
            - automatic central lubrication
            - chip conveyor
            - 2 pcs. steady rests
            - various Multifix steel holders
            - documentation
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine EMAG VSC7


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03059 · Vertical Turning Machine

          EMAG - VSC7 - - 2008 - Siemens 840D sl

          Technical details
          turning diameter 340 mm︱swing diameter 420 mm︱turning height 160 mm︱Control Siemens 840D sl︱chucking diameter 400 mm︱travel -x axis 850 mm︱travel -z axis 315 mm︱loading time 4 - 6 sec︱workpiece sequence time 8 - 10 sec︱main spindle ︱spindle flange DIN55026 Größe 11︱forward bearing diameter 160 mm︱turning speeds 3400 U/min︱Main drive ︱capacity at 40% load 49 kW︱capacity at 100% load 38 kW︱torque at 40% load 775 Nm︱torque at 100% load 600 Nm︱feed motor ︱rapid travel speed x-axis 45 m/min︱
          The machine is in a first-class condition. Equipment / Accessories: - C-Axis - driven tools - EMAG tool disk turret DIN 69880 for 12 driven tools, shaft diameter 50 mm - workpiece magazine - coolant system with internal coolant supply and high pressure pump - chip conveyor
            turning diameter 340 mm
            swing diameter 420 mm
            turning height 160 mm
            Control Siemens 840D sl
            chucking diameter 400 mm
            travel -x axis 850 mm
            travel -z axis 315 mm
            loading time 4 - 6 sec
            workpiece sequence time 8 - 10 sec
            spindle flange DIN55026 Größe 11
            forward bearing diameter 160 mm
            turning speeds 3400 U/min
            capacity at 40% load 49 kW
            capacity at 100% load 38 kW
            torque at 40% load 775 Nm
            torque at 100% load 600 Nm
            rapid travel speed x-axis 45 m/min
            Description :
            The machine is in a first-class condition.

            Equipment / Accessories:
            - C-Axis
            - driven tools
            - EMAG tool disk turret DIN 69880 for 12 driven tools, shaft diameter 50 mm
            - workpiece magazine
            - coolant system with internal coolant supply and high pressure pump
            - chip conveyor
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column SCHIES5 Vertimaster 16 DS 125


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03094 · Vertical Turret Lathe - Single Column

          SCHIES5 - Vertimaster 16 DS 125 - - 1987 - Siemens 840 D

          Technical details
          faceplate diameter 1250 mm︱swing diameter 1600 mm︱turning height 1250 mm︱ 50 / 550 mm︱faceplate ︱faceplate diameter 1250 mm︱faceplate load max. 8000 kg︱transmission ratio 2 ︱turning speed range I 4 - 100 U/min︱turning speed range II 16 - 400 U/min︱feed speeds 0,1 - 2000 mm/min︱feed speeds 0,01 - 50 1/mm︱faceplate drive 71 kW︱max. torque on the faceplate 20 kNm︱bit feeder travel vertical 1000 mm︱tool taper WSD-WO ︱tool changer 12 Stationen︱Control Siemens 840 D ︱total power requirement 130 kVA︱
          Equipment / Accessories: machine was in 2014 equipped with new controler Siemens 840 D, new electric cabinet and new wiring! - right cross beam support, vertical travel: 1000 mm - right cross beam support, horizontal travel - from turning center to the right: 950 mm - from the turning center to the left: 675 mm - tool system designation: WSD WO - shank cross-section of the tools: 32 x 32 mm
            faceplate diameter 1250 mm
            swing diameter 1600 mm
            turning height 1250 mm
            50 / 550 mm
            faceplate diameter 1250 mm
            faceplate load max. 8000 kg
            transmission ratio 2
            turning speed range I 4 - 100 U/min
            turning speed range II 16 - 400 U/min
            feed speeds 0,1 - 2000 mm/min
            feed speeds 0,01 - 50 1/mm
            faceplate drive 71 kW
            max. torque on the faceplate 20 kNm
            bit feeder travel vertical 1000 mm
            tool taper WSD-WO
            tool changer 12 Stationen
            Control Siemens 840 D
            total power requirement 130 kVA
            Description :
            Equipment / Accessories:

            machine was in 2014 equipped with new controler Siemens 840 D, new electric
            cabinet and new wiring!

            - right cross beam support, vertical travel: 1000 mm
            - right cross beam support, horizontal travel
            - from turning center to the right: 950 mm
            - from the turning center to the left: 675 mm
            - tool system designation: WSD WO
            - shank cross-section of the tools: 32 x 32 mm
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal DECKEL-MAHO DMU 105


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02932 · Machining Center - Universal

          DECKEL-MAHO - DMU 105 - - 2014 - Sinumerik 840D-SL

          Technical details
          x-travel 1135 mm︱y-travel 1050 mm︱z-travel 750 mm︱Control Sinumerik 840D-SL ︱table-size 1400 x 1050 mm︱table load 2500 kg︱max. size of workpiece LxWxH 1400 x 1240 x 750 mm︱turning speeds 10000 U/min︱feed speeds x/y/z axis 40000 mm/min︱rapid travel x/y/z 40000 mm/min︱tool taper HSK-A100 ︱number of places in tool magazine 30 ︱max. tool weight 20 kg︱max. tool length 395 mm︱max. tool diameter 110 mm︱Machine height 3294 mm︱drive capacity - spindle motor 44 kW︱weight of the machine ca. 17,9 t︱
          Universal Milling Machine, monoBLOCK contruction (3-axes) - only 3800 spindle hours, 13400 connecting hours Equipment / Accessories: - coolant system - high-pressure pump - chip conveyor - manual control panel - BALLUFF option - documentation
            x-travel 1135 mm
            y-travel 1050 mm
            z-travel 750 mm
            Control Sinumerik 840D-SL
            table-size 1400 x 1050 mm
            table load 2500 kg
            max. size of workpiece LxWxH 1400 x 1240 x 750 mm
            turning speeds 10000 U/min
            feed speeds x/y/z axis 40000 mm/min
            rapid travel x/y/z 40000 mm/min
            tool taper HSK-A100
            number of places in tool magazin. 30
            max. tool weight 20 kg
            max. tool length 395 mm
            max. tool diameter 110 mm
            Machine height 3294 mm
            drive capacity - spindle motor 44 kW
            weight of the machine ca. 17,9 t
            Description :
            Universal Milling Machine, monoBLOCK contruction (3-axes)

            - only 3800 spindle hours, 13400 connecting hours

            Equipment / Accessories:
            - coolant system
            - high-pressure pump
            - chip conveyor
            - manual control panel
            - BALLUFF option
            - documentation
          129.500 €
          Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used  Milling Machining Centers 5 Axis DMG DMU 340 P


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03074 · Milling Machining Centers 5 Axis

          DMG - DMU 340 P - - 2005 - Heidenhain TNC 530

          Technical details
          x-travel 3400 mm︱y-travel 3400 mm︱z-travel 1600 mm︱control Heidenhain TNC 530︱tool taper SK 50 ︱tool changer 60-fach ︱spindle speed: 10000 U/min︱NC rotary table ︱clamping surface diameter x width 2600 x 2200 mm︱speed max. 5 U/min︱feed 1800 °/min︱max. table loading capacity 16000 kg︱workpiece measurements diameter x width max. 3500x1650 mm︱Power connection 126 kVA︱weight of the machine ca. 96 t︱
          The machine has 24200 spindle hours.
            x-travel 3400 mm
            y-travel 3400 mm
            z-travel 1600 mm
            control Heidenhain TNC 530
            tool taper SK 50
            tool changer 60-fach
            spindle speed: 10000 U/min
            clamping surface diameter x widt. 2600 x 2200 mm
            speed max. 5 U/min
            feed 1800 °/min
            max. table loading capacity 16000 kg
            workpiece measurements diameter . 3500x1650 mm
            Power connection 126 kVA
            weight of the machine ca. 96 t
            Description :
            The machine has 24200 spindle hours.
          Datasheet
          Request / Contact
          used  Milling Machining Centers 5 Axis DMG DMU 80T


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03081 · Milling Machining Centers 5 Axis

          DMG - DMU 80T - - 2002 - Heidenhain TNC 430

          Technical details
          x-travel 880 mm︱y-travel 630 mm︱z-travel 630 mm︱Control Heidenhain TNC 430︱Main drive ︱spindle speed 18000 1/min︱motor spindle HSK 63 ︱capacity at 40% load 15 kW︱capacity at 100% load 10 kW︱tool taper SK40
          Equipment / Accessories: - NC swivel milling head (B-axis) - manual swivel milling head - pick-up tool changing device with 32 magazine places HSK 63 - active cooling for motor spindle - electronical hand wheel - high-speed milling module - infrared measuring probe - tool measuring BLUM laser - 3D-continuous path control - NC rotary table integrated in rigid table - Ø 700 mm / 1250 mm x 700 mm - max. load 500 kg - coolant system - spiral conveyor
            x-travel 880 mm
            y-travel 630 mm
            z-travel 630 mm
            Control Heidenhain TNC 430
            spindle speed 18000 1/min
            motor spindle HSK 63
            capacity at 40% load 15 kW
            capacity at 100% load 10 kW
            tool taper SK40
            Description :
            Equipment / Accessories:
            - NC swivel milling head (B-axis)
            - manual swivel milling head
            - pick-up tool changing device with 32 magazine places HSK 63
            - active cooling for motor spindle
            - electronical hand wheel
            - high-speed milling module
            - infrared measuring probe
            - tool measuring BLUM laser
            - 3D-continuous path control
            - NC rotary table integrated in rigid table
            - Ø 700 mm / 1250 mm x 700 mm
            - max. load 500 kg
            - coolant system
            - spiral conveyor
          Datasheet
          Request / Contact

          Ram-Type Floor Boring and Milling M/C

          used  Ram-Type Floor Boring and Milling M/C TITAN (PAMA) AFP 200


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02796 · Ram-Type Floor Boring and Milling M/C

          TITAN (PAMA) - AFP 200 - - retrofit 2010 - Sinumerik 840 D

          Technical details
          spindle diameter 203,2 mm︱x-travel 9.000 mm︱y-travel 4.000 mm︱Control Sinumerik 840 D ︱grinding spindel dia. 335 mm︱spindle taper ISO 60 ︱spindle turning speed range 1-350 / 5-1.200 U/min︱w-axis 800 mm︱z-axis 1.200 mm︱rapid traverse X-axis 8.000 m/min︱rapid travel Y-axis 6.000 m/min︱RAM dimensions 530 x 600 mm︱Main drive 75 kW︱total power requirement 165 kW︱weight of the machine ca. ca. 130 t︱dimensions of the machine ca. 16 x 5,5 x 8,1 m︱
          The machine had not turning table. We can offer to you a separate turning table WOTAN Rapid 30dv, stock no. 02983. Equipment / Accessories: - with ram and travelling column - hydrostatic guideways in x,- y,- and w-axis - telescopic cover for bed x-axis - cumulated z- and w-axis - levelling shoes - platform y-axis
            spindle diameter 203,2 mm
            x-travel 9.000 mm
            y-travel 4.000 mm
            Control Sinumerik 840 D
            grinding spindel dia. 335 mm
            spindle taper ISO 60
            spindle turning speed range 1-350 / 5-1.200 U/min
            w-axis 800 mm
            z-axis 1.200 mm
            rapid traverse X-axis 8.000 m/min
            rapid travel Y-axis 6.000 m/min
            RAM dimensions 530 x 600 mm
            Main drive 75 kW
            total power requirement 165 kW
            weight of the machine ca. ca. 130 t
            dimensions of the machine ca. 16 x 5,5 x 8,1 m
            Description :
            The machine had not turning table.
            We can offer to you a separate turning table WOTAN Rapid 30dv, stock no. 02983.

            Equipment / Accessories:
            - with ram and travelling column
            - hydrostatic guideways in x,- y,- and w-axis
            - telescopic cover for bed x-axis
            - cumulated z- and w-axis
            - levelling shoes
            - platform y-axis
          275.000 €
          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used  Tool Room Milling Machine - Universal MAHO MH 800 P


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03091 · Tool Room Milling Machine - Universal

          MAHO - MH 800 P - - 1993 - Heidenhain TNC 310

          Technical details
          x-travel 700 mm︱y-travel 450 mm︱z-travel 500 mm︱Control Heidenhain TNC 310︱tool taper ISO 40 ︱total power requirement 9 kW︱weight of the machine ca. 3,9 t︱
          Equipment / Accessories: - dialogue control Heidenhain TNC 310 in 2007 - various tool holders - documentation
            x-travel 700 mm
            y-travel 450 mm
            z-travel 500 mm
            Control Heidenhain TNC 310
            tool taper ISO 40
            total power requirement 9 kW
            weight of the machine ca. 3,9 t
            Description :
            Equipment / Accessories:
            - dialogue control Heidenhain TNC 310 in 2007
            - various tool holders
            - documentation
          12.800 €
          Datasheet
          Request / Contact

          Turbine Blade Milling Machine

          used  Turbine Blade Milling Machine FERRARI S 630


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03088 · Turbine Blade Milling Machine

          FERRARI - S 630 - - 2007 - Siemens 840 D

          Technical details
          number of spindles 1 ︱workpiece length 300-2500 mm︱x-travel 3000 mm︱y-travel 820 mm︱z-travel 1120 mm︱control Siemens 840 D︱centre height 520 mm︱max. workpiece diameter 740 mm︱workpiece weight max. 1600 kg︱working spindle ︱tool taper SK 50 ︱spindle speed 12000 1/min︱tool piece magazine with 40 Wkz/tools︱max. tool diameter 100 mm︱max. tool length 400 mm︱total power requirement 63 kW︱weight of the machine ca. 19 t︱dimensions of the machine ca. 10 x 6 x 3,5 m︱
            number of spindles 1
            workpiece length 300-2500 mm
            x-travel 3000 mm
            y-travel 820 mm
            z-travel 1120 mm
            control Siemens 840 D
            centre height 520 mm
            max. workpiece diameter 740 mm
            workpiece weight max. 1600 kg
            tool taper SK 50
            spindle speed 12000 1/min
            tool piece magazine with 40 Wkz/tools
            max. tool diameter 100 mm
            max. tool length 400 mm
            total power requirement 63 kW
            weight of the machine ca. 19 t
            dimensions of the machine ca. 10 x 6 x 3,5 m
          Datasheet
          Request / Contact

          Bevel Gear Generator - Spiral

          used  Bevel Gear Generator - Spiral KLINGELNBERG KNC 25 P


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02478 · Bevel Gear Generator - Spiral

          KLINGELNBERG - KNC 25 P - - 1997 -

          Technical details
          max. wheel diameter 275 mm︱gear width 150 mm︱max. module 6 ︱min. module 1.5 ︱max. workpiece diameter 275 mm︱tooth width max. 5.5 mm︱spiral angle 0 - 60 °︱number of teeth 5 - 120 ︱transmission ratio min. 1:1 ︱transmission ratio max. 1:10 ︱milling drive motor 20 kW︱workpiece drive 14.5 kW︱total power requirement 62 kVA︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,7 x 4,387 x 2,45 m︱
          Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -
            max. wheel diameter 275 mm
            gear width 150 mm
            max. module 6
            min. module 1.5
            max. workpiece diameter 275 mm
            tooth width max. 5.5 mm
            spiral angle 0 - 60 °
            number of teeth 5 - 120
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            milling drive motor 20 kW
            workpiece drive 14.5 kW
            total power requirement 62 kVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7 x 4,387 x 2,45 m
            Description :
            Tool spindle (D-axis)
            - workpiece spindle speed (infinitely) 60 to 350 r.p.m.

            Tool positioning axis (E-axis)
            - swivel range 0 to 360°
            - swivel speed max. 19.5°/s

            Workpiece spindle (B-axis)
            - mounting diameter outer cone (1: 4) 140 mm
            - standard internal cone (1:20) 99.218 mm
            - workpiece spindle speed max. 300 r.p.m.
            - workpiece spindle passage 90 mm

            Workpiece positioning axis (Y-axis)
            - travel 870 mm
            - speed max. 4.5 m/min

            Roller rotation axis (A-axis)
            - swivel range 315°
            - swivel speed max. 40°/s

            Axis intersection (Z-axis)
            - travel range max. +/- 50 mm
            - speed max. 0.657 m/min

            Workpiece swivel axis (C-axis)
            - swivel range -8.5 to 98°
            - swivel speed max. 21.5 °/s

            Milling depth axis (X-axis)
            - travel from -25 to 640 mm
            - max. speed 6 m/min

            Machinen distance (V-axis)
            - travel 150 mm
            - speed max. 1.6 m/min

            - 13 milling cutters included -
          44.000 €
          Datasheet
          Request / Contact

          Bevel Gear Grinding Machine

          used  Bevel Gear Grinding Machine KLINGELNBERG G 27


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02980 · Bevel Gear Grinding Machine

          KLINGELNBERG - G 27 - - 2004 - SIEMENS 840 D

          Technical details
          max. wheel diameter 300 mm︱gear width ca. 60 mm︱max. module 8 ︱min. module 0,7 ︱Control SIEMENS 840 D︱min/max. pitch cone angle - 90 ... + 90 °︱workpiece spindle - bore 127 mm︱grinding wheel diameter 50 - 230 mm︱spindle speeds (infinitely variable) 7500 U/min︱work piece spindle speed 700 U/min︱total power requirement 146 kW︱weight of the machine ca. 21 t︱dimensions of the machine ca. 5,5 x 3,6 x 3,1 m︱
          Precision Grinding Machine for the machining of spiral bevel gears according to the systems Klingelnberg, Wiener, Oerlikon, Gleason, as well as for the machining of front clutches and curvic couplings. Equipment / Accessories: Hoffmann Filteranlage ERK330-V-2-S
            max. wheel diameter 300 mm
            gear width ca. 60 mm
            max. module 8
            min. module 0,7
            Control SIEMENS 840 D
            min/max. pitch cone angle - 90 ... + 90 °
            workpiece spindle - bore 127 mm
            grinding wheel diameter 50 - 230 mm
            spindle speeds (infinitely varia. 7500 U/min
            work piece spindle speed 700 U/min
            total power requirement 146 kW
            weight of the machine ca. 21 t
            dimensions of the machine ca. 5,5 x 3,6 x 3,1 m
            Description :
            Precision Grinding Machine for the machining of spiral bevel gears according to
            the systems Klingelnberg, Wiener, Oerlikon, Gleason, as well as for the
            machining of front clutches and curvic couplings.

            Equipment / Accessories:
            Hoffmann Filteranlage ERK330-V-2-S
          184.000 €
          Datasheet
          Request / Contact

          Gear Deburring Machine

          used  Gear Deburring Machine RAUSCH GRATOMAT 4000


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03069 · Gear Deburring Machine

          RAUSCH - GRATOMAT 4000 - - 2008 -

          Technical details
          max. wheel diameter 2800 mm︱gear width 1000 mm︱max. module 18 ︱min. module 2 ︱max. workpiece weight 4000 kg︱workpiece turning speeds 1,11 - 6,66 U/min︱
          Gear dia. External: min. 1200 mm, max 2800 mm Gear dia. Internal: min. 1000 mm Complete datasheet of the machine upon request.
            max. wheel diameter 2800 mm
            gear width 1000 mm
            max. module 18
            min. module 2
            max. workpiece weight 4000 kg
            workpiece turning speeds 1,11 - 6,66 U/min
            Description :
            Gear dia. External: min. 1200 mm, max 2800 mm
            Gear dia. Internal: min. 1000 mm
            Complete datasheet of the machine upon request.
          Datasheet
          Request / Contact

          Gear Grinding Machine

          used  Gear Grinding Machine GLEASON-PFAUTER P 2000 G


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03068 · Gear Grinding Machine

          GLEASON-PFAUTER - P 2000 G - - 2008 - Sinumerik 840 D

          Technical details
          max. wheel diameter 2600 mm︱gear width 600 mm︱max. module . ︱control Sinumerik 840 D ︱WORKPIECE DURING INTERNAL GRINDING ︱max. ring thickness 300 mm︱max. workpiece inner diameter 2000 mm︱min. workpiece inner diameter 1100 mm︱TOOL (PROFILE DISK) ︱max. diameter 400 mm︱max. width 65 mm︱diameter of spindle for taking the disk 127 mm︱MACHINE ︱slide travel in the X-direction max. 590 mm︱slide travel in the Z-direction max. 1180 mm︱grinding head - swivable +/- 45 °︱WORKPIECE TABLE ︱table diameter 1460 mm︱boring diameter 500 mm︱table load 20000 kg︱
          ONLY FOR INTERNAL GRINDING Equipment / Accessories: - coolant filter system HOFFMANN type PWT 290-3, year 2009
            max. wheel diameter 2600 mm
            gear width 600 mm
            max. module .
            control Sinumerik 840 D
            max. ring thickness 300 mm
            max. workpiece inner diameter 2000 mm
            min. workpiece inner diameter 1100 mm
            max. diameter 400 mm
            max. width 65 mm
            diameter of spindle for taking t. 127 mm
            slide travel in the X-direction . 590 mm
            slide travel in the Z-direction . 1180 mm
            grinding head - swivable +/- 45 °
            table diameter 1460 mm
            boring diameter 500 mm
            table load 20000 kg
            Description :
            ONLY FOR INTERNAL GRINDING

            Equipment / Accessories:
            - coolant filter system HOFFMANN type PWT 290-3, year 2009
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used  Gear Hobbing Machine - Vertical GLEASON-PFAUTER P 4000


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03093 · Gear Hobbing Machine - Vertical

          GLEASON-PFAUTER - P 4000 - - 2011 - Sinumerik 840D/DE powerline

          Technical details
          max. wheel diameter 4350 mm︱gear width - ︱max. module 25, 35 / 30 ︱Control Sinumerik 840D/DE powerline︱Motor Head - External: ︱module - max. for hobbing 25 ︱module - max. for profile cutting 35 ︱max. workpiece diameter at exterior gearing 4350 mm︱hob-/disk milling cutter ︱tip circle diameter max. 450 mm︱hob length - max. 500 mm︱ ︱diameter 80 mm︱taper HSK-A 125 ︱travel -x axis 1800 mm︱travel -y axis 450 mm︱travel -z axis 1300 mm︱milling head -swivable +/- + 30 / - 45 °︱speeds of tool 20 - 200 U/min︱Internal Milling Head:
          The machine is suitable for internal and external gearing. It is suitable for wet and dry cutting. The condition it excellent - it has only 9962 cycle hours. Equipment / accessories: - increased axial travel - large external milling head - zero point clamping systems - setup tables - workspace expansion - motorized milling head M3 - signal light (3 colors) - extended software for fault diagnosis - telephone diagnostic system - semi-automatic centering - main stand - raised - - oil mist separator - electrostatic - - internal milling head IFK2 - dialog program "Internal milling" - set of adjusting wedges - chip disposal through the middle of the table and machine bed - 2 additional chip scraper conveyors in the work area - switching the machine - milling arbor diameter 80 mm - dialog program "Milling in the single-part process" - dialog program "Saving shifting data" - dialog program "Saving cutter damage areas" - offline version "Dialog programming hobbing" - additional chip conveyance along the machine - network connection (Ethernet) - zero point clamping systems - setup table - clamping devices - storage space for pallet - external hob set-up station - various spare parts There is also a hob and form cutter package with various hard metal plates (inserts for hard metal cutters), which can be purchased additionally.
            max. wheel diameter 4350 mm
            gear width -
            max. module 25, 35 / 30
            Control Sinumerik 840D/DE powerline
            module - max. for hobbing 25
            module - max. for profile cuttin. 35
            max. workpiece diameter at exter. 4350 mm
            tip circle diameter max. 450 mm
            hob length - max. 500 mm
            diameter 80 mm
            taper HSK-A 125
            travel -x axis 1800 mm
            travel -y axis 450 mm
            travel -z axis 1300 mm
            milling head -swivable +/- + 30 / - 45 °
            speeds of tool 20 - 200 U/min
            Description :
            The machine is suitable for internal and external gearing.
            It is suitable for wet and dry cutting.
            The condition it excellent - it has only 9962 cycle hours.

            Equipment / accessories:
            - increased axial travel
            - large external milling head
            - zero point clamping systems
            - setup tables
            - workspace expansion
            - motorized milling head M3
            - signal light (3 colors)
            - extended software for fault diagnosis
            - telephone diagnostic system
            - semi-automatic centering
            - main stand - raised -
            - oil mist separator - electrostatic -
            - internal milling head IFK2
            - dialog program "Internal milling"
            - set of adjusting wedges
            - chip disposal through the middle of the table and machine bed
            - 2 additional chip scraper conveyors in the work area
            - switching the machine
            - milling arbor diameter 80 mm
            - dialog program "Milling in the single-part process"
            - dialog program "Saving shifting data"
            - dialog program "Saving cutter damage areas"
            - offline version "Dialog programming hobbing"
            - additional chip conveyance along the machine
            - network connection (Ethernet)
            - zero point clamping systems
            - setup table
            - clamping devices
            - storage space for pallet
            - external hob set-up station
            - various spare parts

            There is also a hob and form cutter package with various hard metal plates
            (inserts for hard metal cutters), which can be purchased additionally.
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical GLEASON-PFAUTER P1600/2000


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03067 · Gear Hobbing Machine - Vertical

          GLEASON-PFAUTER - P1600/2000 - - 2008 - Sinumerik 840D

          Technical details
          max. wheel diameter 3000 mm︱gear width 600 mm︱max. module 30 ︱min. workpiece inner diameter 630 mm︱max. workpiece inner diameter 2000 mm︱max. workpiece outer diameter 3000 mm︱max. workpiece tooth width 600 mm︱max. rim strength 500 mm︱x-axis 845 mm︱z-axis 1000 mm︱feed speeds X/Z 3000/4000 mm/min︱workpiece table ︱workpiece table outer diameter 1460 mm︱table speeds: 0 - 8 U/min︱bore 500 mm︱max. table loading capacity 20000 kg︱hob-/disk milling cutter ︱hob turning speeds 18 - 180 U/min︱max. tip circle diameter (cutter) 440 mm︱min. tip circle diameter (cutter) 310 mm︱
          ONLY FOR INTERNAL GRINDING - without coolant device
            max. wheel diameter 3000 mm
            gear width 600 mm
            max. module 30
            min. workpiece inner diameter 630 mm
            max. workpiece inner diameter 2000 mm
            max. workpiece outer diameter 3000 mm
            max. workpiece tooth width 600 mm
            max. rim strength 500 mm
            x-axis 845 mm
            z-axis 1000 mm
            feed speeds X/Z 3000/4000 mm/min
            workpiece table outer diameter 1460 mm
            table speeds: 0 - 8 U/min
            bore 500 mm
            max. table loading capacity 20000 kg
            hob turning speeds 18 - 180 U/min
            max. tip circle diameter (cutter. 440 mm
            min. tip circle diameter (cutter. 310 mm
            Description :
            ONLY FOR INTERNAL GRINDING

            - without coolant device
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1501


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03076 · Gear Hobbing Machine - Vertical

          GLEASON- PFAUTER - P 1501 - - 1972 -

          Technical details
          max. workpiece diameter 1500 mm︱milling slide travel 600 mm︱clamping table diameter 1200 mm︱table bore diameter 255 mm︱weight of the machine ca. 18000 kg︱dimensions of the machine ca. 5040 x 3190 x 3200 m︱
          Accessories / Equipment: - chip conveyor and coolant device - 2 cut cycle - crowning device - change gears - arbors - documentation
            max. workpiece diameter 1500 mm
            milling slide travel 600 mm
            clamping table diameter 1200 mm
            table bore diameter 255 mm
            weight of the machine ca. 18000 kg
            dimensions of the machine ca. 5040 x 3190 x 3200 m
            Description :
            Accessories / Equipment:

            - chip conveyor and coolant device
            - 2 cut cycle
            - crowning device
            - change gears
            - arbors
            - documentation
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical SCHIESS RF 40/60


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02511 · Gear Hobbing Machine - Vertical

          SCHIESS - RF 40/60 - - 1966 -

          Technical details
          max. wheel diameter 6000 mm︱gear width 2000 mm︱max. module 20 ︱max. workpiece weight 100 t︱max. wheel diameter 6000 mm︱tooth width 2000 mm︱max. module 20 ︱workpiece weight 100 t︱table diameter 4075 mm︱milling slide-vertical movement autom/manual 2000 mm︱diameter 1400 mm︱
          for external gears - excellent condition, still under power in the production company Accessories: - div. clamping vices - div. cutter arbors - documentation Technical details: - minimum-maximum hob speed: 0-100 rpm - maximum table speed: depends on the number of teeth - machine has a complete change gear set - cutting spur and helical gears possible - Cutter arbors: fi60, fi70, fi80, fi100 - complete documentation (instruction manual, operation manual, etc) - not possible to work of milling cutters together with hob cutters at arbor - will be delivered without hob arbors - no chip conveyor - no clamping vices
            max. wheel diameter 6000 mm
            gear width 2000 mm
            max. module 20
            max. workpiece weight 100 t
            max. wheel diameter 6000 mm
            tooth width 2000 mm
            max. module 20
            workpiece weight 100 t
            table diameter 4075 mm
            milling slide-vertical movement . 2000 mm
            diameter 1400 mm
            Description :
            for external gears - excellent condition, still under power
            in the production company

            Accessories:
            - div. clamping vices
            - div. cutter arbors
            - documentation

            Technical details:
            - minimum-maximum hob speed: 0-100 rpm
            - maximum table speed: depends on the number of teeth
            - machine has a complete change gear set
            - cutting spur and helical gears possible
            - Cutter arbors: fi60, fi70, fi80, fi100
            - complete documentation (instruction manual, operation manual, etc)

            - not possible to work of milling cutters together with hob cutters at arbor
            - will be delivered without hob arbors
            - no chip conveyor
            - no clamping vices
          125.000 €
          Datasheet
          Request / Contact

          Gear Shaping Machine

          used  Gear Shaping Machine MAAG SH 250/300 S


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02840 · Gear Shaping Machine

          MAAG - SH 250/300 S - - 1982 -

          Technical details
          max. wheel diameter 3080 mm︱gear width 870 mm︱max. module 50 ︱min. module 25 ︱min. wheel diameter 200 mm︱max. number of teeth 1000 ︱min. number of teeth 12 ︱tool length - max. 312 mm︱min. ram stroke 70 mm︱dividing plate diameter 1116 mm︱table bore diameter 420 mm︱table travel max. 2x460 = 920 mm︱ram stroke speed 3,2 - 40 m/min.︱max. ram stroke 700 mm︱table load 15000 kg︱depth of hole 1200 mm︱max. dia. of teeth cutting 2940 mm︱clamping table diameter 1100 mm︱max.helical angle 35 °︱total power requirement 71 kW︱
          Equipment/Accessories: chip conveyor Local rim support (bed mounted) Internal gear cutting attachment JVS-250 Work base plate Ø1800 mm Longitudinal Correction Device The machine is practically new and will be delivered with a precision chart. Cutting quality DIN 7! The main characteristics of the machine are excellent accuracy and high versatility in producing external gears, internal gears, herringbone gears, double helical gears and gear racks. The outstanding economy of the MAAG SH 250/300 S derives from the high metal removal rate (for material until 1400 N/mm2 and 400 HB) and simplicity of form and long tool life of the roughing cutter, which keeps the tooling costs extremely low. After the roughing operation, the gear teeth are finished machined in the same set-up by the generating method. And that makes it in most of all cases possible, to avoid grinding. With the full swivel cutter ram, any desired helix angle can be set. The finishing generating operation yields a very good tooth accuracy in short machining time. The machining cycles for the plunge cut and the generating operations take place automatically. The vertical working range is so large that even double-helical gears can usually be completely machined without altering the set-up. The cutter ram is driven by a DC reversible motor via a 7-start spindle. Helical gears or double helical gears with a small run-out groove could be cut by a helical rack shaped cutter. When using the swivelling cutter holder for cutting gears with great helix angles the ram stroke could be highly reduced.
            max. wheel diameter 3080 mm
            gear width 870 mm
            max. module 50
            min. module 25
            min. wheel diameter 200 mm
            max. number of teeth 1000
            min. number of teeth 12
            tool length - max. 312 mm
            min. ram stroke 70 mm
            dividing plate diameter 1116 mm
            table bore diameter 420 mm
            table travel max. 2x460 = 920 mm
            ram stroke speed 3,2 - 40 m/min.
            max. ram stroke 700 mm
            table load 15000 kg
            depth of hole 1200 mm
            max. dia. of teeth cutting 2940 mm
            clamping table diameter 1100 mm
            max.helical angle 35 °
            total power requirement 71 kW
            Description :
            Equipment/Accessories:

            chip conveyor
            Local rim support (bed mounted)
            Internal gear cutting attachment JVS-250
            Work base plate Ø1800 mm
            Longitudinal Correction Device

            The machine is practically new and will be delivered with a precision chart.
            Cutting quality DIN 7! The main characteristics of the machine are excellent
            accuracy and high versatility in producing external gears, internal gears,
            herringbone gears, double helical gears and gear racks. The outstanding economy
            of the MAAG SH 250/300 S derives from the high metal removal rate (for material
            until 1400 N/mm2 and 400 HB) and simplicity of form and long tool life of the
            roughing cutter, which keeps the tooling costs extremely low. After the roughing
            operation, the gear teeth are finished machined in the same set-up by the
            generating method. And that makes it in most of all cases possible, to avoid
            grinding. With the full swivel cutter ram, any desired helix angle can be set.
            The finishing generating operation yields a very good tooth accuracy in short
            machining time. The machining cycles for the plunge cut and the generating
            operations take place automatically. The vertical working range is so large that
            even double-helical gears can usually be completely machined without altering
            the set-up. The cutter ram is driven by a DC reversible motor via a 7-start
            spindle. Helical gears or double helical gears with a small run-out groove could
            be cut by a helical rack shaped cutter. When using the swivelling cutter holder
            for cutting gears with great helix angles the ram stroke could be highly
            reduced.
          195.000 €
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Profil de commerçant: Leyendecker & Hollmann GmbH
          Werkzeugmaschinen - Machines-outils

          Contacter le commerçant



            Leyendecker & Hollmann GmbH
          Werkzeugmaschinen - Machines-outils

           Konrad-Zuse-Str. 5
            40789 Monheim
            Allemagne
            + 49 (2173) 22 55 0 "> + 49 (2173) 22 55 0
            + 49 (2173) 25627
            info@LHmachine.com
            www.LHmachine.com

          Profil de commerçant

          LEYENDECKER & HOLLMANN - SPÉCIALISTE DES OUTILS MACHINES UTILISÉS DEPUIS 1997

          A propos

          Nous sommes une société opérant sur le plan international et spécialisée dans l'achat et la vente de machines-outils d'occasion. Notre société a été fondée à 1997 par Frank Hollmann, ingénieur diplômé.

           

          Je m'abonne!

          Nous achetons en permanence des machines-outils anciennes de toutes sortes, modernes mais également bien entretenues. En particulier nous sommes intéressés par machines à engrenages et machinerie lourde. Nous achetons des machines individuelles ainsi que des équipements complets. Comme nous avons nos propres techniciens et un entrepôt doté d’une capacité de grue en tonnes 50, nous pouvons toujours agir rapidement. Nous garantissons un déroulement irréprochable. Bien sûr, nous payons toujours les machines en totalité avant le chargement.

           

          Soldes

          Dans notre entrepôt, nous tenons en permanence ca. Des machines-outils bien entretenues 80 pour vous. Après notification préalable, vous êtes invités à inspecter les machines sous tension.
          Si vous ne trouvez pas la machine que vous recherchez sur notre site Web, veuillez nous le faire savoir. nous allons essayer d'obtenir la machine pour vous.

          Nous sommes membre du groupe allemand Fachverband FDM et reliés à plusieurs collègues dans toute l'Europe par une base de données, ce qui nous permet d'accéder à de nombreuses autres machines-outils d'occasion.

           

          Notre Objectif

          Notre objectif est une coopération de confiance à long terme avec nos fournisseurs et nos clients.

          CONTACTER LEYENDECKER & HOLLMANN GMBH

          Konrad-Zuse-Str. 5
          40789 Monheim sur le Rhin
          Allemagne
          Tel (+ 49) 2173 22 550

          Lu - Je 8:00 - 17:00 Uhr

          Fr 8: 00 - 14: 00




          Leyendecker  &  Hollmann GmbH Werkzeugmaschinen - Machine Tools  40789 Monheim Konrad-Zuse-Str. 5 Deutschland
          Leyendecker & Hollmann GmbH Werkzeugmaschinen - Machine Tools

          Konrad-Zuse-Str. 5



          Contact Trader


            Leyendecker & Hollmann GmbH Werkzeugmaschinen - Machine Tools
           Konrad-Zuse-Str. 5
            40789 Monheim
            Deutschland
            +49 (2173) 22 55 0
            +49 (2173) 25627
            info@LHmachine.com
            www.LHmachine.com
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Universal · CNC Dreh- und Fräszentrum · Drehmaschine - zyklengesteuert · Form-Messmaschine · Führungsbahnschleifmaschine · Gewinde-Schnecken-Schleifmaschine · Innenschleifmaschine · Karusselldrehmaschine - Einständer · Kegelradfräsmaschine-Bogenverzahnung · Kegelradschleifmaschine · Keilnutenziehmaschine · Leit- und Zugspindeldrehmaschine · Plattenbohrwerk - Traghülse · Punktschweißmaschine · Rundschleifmaschine - Außen · Rundtischflächenschleifmaschine - Horiz. · Schleifscheibenflansch · Schleudergießanlage · Schwerdrehmaschine · Spiralkegelradschneidmaschine · Turbinenschaufelfräsmaschine · Vertikaldrehmaschine · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Werkzeugprobierpresse · Wälzfräser · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradentgratmaschine · Zahnradprüfmaschine · Zahnradschabemaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zahnstangenfräsmaschine · Zahnstangenschleifmaschine ·