number of spindles 6 ︱spindle passage 32 mm︱turning length - mm︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

With Iemca bar loader The machine is in working order, but the X axis needs one new valve. Maximum machining diameter 32 mm Configuration (currently) Pos 1: X and Z axes Pos 2: X and Z axes Pos 3: XZ and Z axes Pos 4 XZ and Z axes Pos 5 XZ and XZ axes Pos6 X- and Z-axis (lower collet) and XX (rear side machining tool) Pos 4 has a separate motor for changing the speed on the workpiece (Thread cycle or thread cutting cycle) All tools are sold together with the machine (Hainbuch collet almost any diameter) and all tool holders (drill holders, turning holders: Square 20x20) are included. The bar loading magazine is also included, with 6x diameter 16 plungers and also 6x diameter 32 plungers. (Chip flutes not included, but that is not a great price) the loading magazine is in working condition. All manuals and setup tools are available and will also come with the machine sold.

turning diameter over bed 1000 mm︱turning diameter over slide rest 760 mm︱turning length 3000 mm︱spindle turning speed range 4,5 - 900 U/min︱spindle bore 104 mm︱total power requirement 30 kW︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. m︱

---

- 3-axis D.R.O. - Feed in the upper slide - Multifix quick change tool holder size D with 2 holders - coolant device - steady-rest The lathe chuck (face plate) shown has been replaced by an older one.

turning diameter 1070 mm︱turning length 3000 mm︱control R&D MTC 2/3 ︱swing diameter over slide rest 710 mm︱centre distance 3000 mm︱main spindle bore 128 mm︱spindle turning speed range 1,4 - 450 U/min︱transmission ratio 2 ︱x-axis 800 mm︱bed width 710 mm︱feed - longitudinal/cross 0,75 - 6000 mm/min︱max. workpiece weight -without tailstock 2500 kg︱max. workpiece weight between centres 8000 kg︱workpiece weight in steadies max. 10000 kg︱tailstock quill diameter 200 mm︱tailstock quill stroke 350 mm︱main drive motor 55 kW︱dimensions of machine 6,0 x 2,7 x 2,4 m︱total power requirement kW︱weight of the machine ca. 23 t︱

---

* CNC-control R&D MTC 2/3 * Autom. 4-station turret SAUTER * Faceplate, diameter 1000 mm * Steady-rest In February/March 2020 the X-axis was completely overhauled (costs 27.392,13 Euro)

turning diameter 1100 mm︱turning length ca. 5000 mm︱control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. 7450 x 2080 x 2000 mm︱

---

Condition: It has only been used few hundred hours per year and is in excellent condition. Turning diameter: 1100 mm Swing over crosslide: 740 mm Center distance: 5000 mm Spindle bore: 95 mm Spindle nose: A1-11 Taper in tailstock: MK 6 Work piece weight: 6000 kg Work piece weight with steadies: 9800 kg Spindle speed: 8-800 rpm Torque: 8500 Nm Longd. feed: 0,01-10 mm/r Cross feed: 0,01-5 mm/r Motor: 30 kW Length: 7450 mm Width: 2080 mm Height: 2000 mm Weight: 13 ton Other/Accessories Multifix D1, SCA typ 624 A1-11 4-jaw chuck ø1000mm. 3pcs. steady rests: ø40-400, ø400-600 & ø550-750mm, coolant.

turning diameter 350 mm︱turning length 800/200 mm︱control Fanuc Series 31i-Model B ︱total power requirement 8,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

First machine installation January 2017 Please note the hours of operation on picture 2! Special feature of the machine: This machine has 2 spindles and 2 revolvers. She is able to work with both revolvers at one Spindle (4 axes) to work. With collet chuck + collets 2 x 3 jaw chucks diameter 200 mm for main and counter spindle Various standard and driven holders Short bar loader included, but the pneumatic unit for the feed is missing. Was used for a different loader. Basic equipment of the machine • 32 bit FANUC CNC control with Manual Guide i (Tiwap) and Internet interface • 10.4 inch LCD color screen • AC-digital FANUC spindle and axis motors • Both spindles with C-axis (built-in motors with oil cooler) • both spindles with disc brake, • Drive power left spindle 15/22 KW, • Torque max. 433 Nm, • speed max. 4,000 min / -1, • Spindle nose A2-8 with protective flange on cylindrical 220 mm, Li. Spindle bore 86 mm, • Bar passage 76 mm, • Clamping cylinder type SMW VNK 170/77, • drive power right spindle 11 / 18,5 KW, • Torque max. 326 Nm, • speed max. 4,000 min / -1, • Spindle nose A2- 6 with protection flange on cylindrical 170 mm, • Right spindle bore 63 mm1 • Bar passage 51 mm, • Clamping cylinder type SMW VNK 130/52, • 2 VDI 40 turrets with 15 tool places each (Double holders are possible, therefore up to 60 tool slots in the machine) • Max. 15 driven tool holders per revolver, • Y-axis 100 mm (+/- 50 mm) guided flat in the upper turret, • M-function for opening / closing the chucks, • Drive power of the driven tools 3.7 / 5.5 KW, • Speed ??of the driven tools max. 4,000 min / -1, • Torque max. 35 Nm, • Tapping without length compensation (Rigid Tapping) • distance between the spindle noses 1130 mm, Max. Turning length 760/200 mm, • Chuck blowout of the right spindle via M command • Footswitch for both chucks • coolant device 4 bar, • Radiator to regulate the coolant Standard accessories: • Automatic central lubrication, • cast construction (Meehanite cast), • X and Y axes as hardened sliding guides, opposite side Turcite coated • Z and A axes with roller guide, • machine panel with workspace lighting, • 1 set of machine documentation, • Integrated alignment screws and shims • CE compliant Optional accessories: Main spindle Hainbuch chuck 65mm is on the machine at the moment Counter spindle Hainbuch collet 65mm is currently on the machine 3 - colored signal lamp (continuous light) for displaying the respective operating state of the machine. 2 x high pressure coolant pump 9 bar (unit price € 1,870.00) Workpiece removal device for drop pieces below the right spindle. The workpiece removal is installed in the lower turret on a station. A conveyor belt transports the parts to the right. It can workpieces up to max. 3.0 kg and a length of 280 mm and a Diameter of 70 mm can be removed. Tool monitoring system (Raku Raku) with Sister tool call by monitoring the drive motors or pre-set tool life revolver. Hinge strap - Chip conveyor to the right. The pitch angle is about 60 degrees, the ejection height 850 mm above the corridor. Bar loader interface with Blok-Skip function Contour Input of the machining contour with angle and radius indication possible. Helical interpolation for driven tools (allows thread milling) Digital display for clamping path monitoring. Digital display, which is located on the front control panel and for easy adjustment of the clamping range is used. There are 13 off standard toolholders and 9 off boring toolholders Thre are 2 off radial driven toolholders

turning diameter 1000 mm︱turning length 2000 mm︱control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

CNC control Siemens 840 D Driven tools C-axis Tailstock Hydraulic jaw chuck Chip conveyor Coolant device Machine is sold without tools / holders

turning diameter 358 mm︱turning length 1000 mm︱control SIEMENS 810 D ︱swing over bed 520 mm︱centre distance 1100 mm︱travel -x axis 296 mm︱travel -z axis 1090 mm︱bar capacity 80 mm︱main spindle speeds: 3750 U/min︱milling spindle turning speed range: 3000 U/min︱rapid power traverse in X-and Z direction 18 / 24 m/min︱tailstock quill diameter 110 mm︱tailstock quill stroke 100 mm︱tailstock quill taper MT 4 ︱tailstock adjustment 990 mm︱Dimensions (LxWxH) 3,59 x 1,90 x 1,89 m︱total power requirement kW︱weight of the machine ca. 6,5 t︱

---

Switch-on hours: 43.747 h * CNC-control SIEMENS 810 D with ShopTurn * electron. handwheel * C-axis * 12-station turret (all stations for driven tools) * 3-jaw power-chuck SMW, diameter 250 mm * Steady-rest SMW-AUTOBLOK SLU-3.1-MS, clamping range 20-185 mm * Coolant equipment * Chip conveyor * Oilmist extractor

turning diameter 300 mm︱turning length 450 mm︱control TX 8 F ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

The machine was general overhauled in 2011 Total hours under power: 18784 To the machine belong a bar loader 3 meters, a hydraulic aggregate, a coolant tank and a chip conveyor, as well as various tools. The machine has the following defects: The toothing of the driven tools are defective and the measuring system of the main spindle is defective. Repair costs about € 11.000, - With: CNC control TX-8F Rotating drive on S1 and S2 Hollow clamping cylinder C axis main and counter spindle Workpiece ejection device and purging device on counterspindle Tapping device hydr. Tool carrier 2 Hinge belt conveyor with coolant pump 5 bar 2 piece switchable high pressure pumps 20 bar 2 revolvers with 10 tool places each VDI 30 tool holder Bar loader Traub-Stamag DN 61 Nr .: 250 Turning diameter 300 mm Turning length up to 450 mm Swing diameter max. 480 mm Standard chuck 175 mm diameter Spindle passage main spindle 65 mm Spindle passage counter spindle 65 mm Disc turret: Max. Slide way in X-direction 140 mm Max. Slide way in Z-direction 450 mm Max. Sledging in Y-direction +/- 35 mm Max. Carriage travel V-axis (counterspindle) 520 mm Spindle head DIN 55026 A6

turning diameter over bed 4100 mm︱turning diameter over slide rest 3505 mm︱turning length 12000 mm︱centre height 2045 mm︱centre distance 12192 mm︱bed width 4270 mm︱max. workpiece weight between centres 70000 kg︱main drive 110 PS︱faceplate turning speed range 0,3- 48,6 (4 Stufen) U/min︱total power requirement kW︱weight of the machine ca. 205 t︱dimensions of the machine ca. m︱

---

4 SLIDES BED LATHE CENTRES HEIGHT 2.045 MM. CENTRES DISTANCE 12.192 MM. MAX. Æ OVER BED 4.100 MM. MAX. Æ OVER SADDLE 3.505 MM. BED WIDTH 4.270 MM. MAX. WEIGHT BETWEEN CENTRES 70 TONS. MAX. WEIGHT BETWEEN CENTRES (with n. 1 steady) 80 TONS. TABLE MOTOR POWER 110 HP. TABLE SPEEDS - n. 4 ranges 0,3 ÷ 48,6 RPM. SPINDLE HOLE 180 MM. TOTAL WEIGHT 205 COMPLETE WITH: - 4 JAWS TABLE 3.660 MM. - N. 2 CLOSED STEADIES - N. 2 SPECIAL SUPPORTS FOR CRANK SHAFTS - UPPER SADDLE FOR THREADING - CRANK SHAFTS TURNING DEVICE

turning diameter over bed 4000 mm︱turning diameter over slide rest 2220 mm︱turning length 13000 mm︱faceplate diameter 2540 mm︱max. workpiece weight between centres 100 ton︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Heavy Duty Lathe with steady-rests in excellent condition. Nr. 4 guides Diameter face plate mm 2.540 Working diameter mm 4.000 x 6.500 Working diameter mm 2.220 x 13.000 Inspection under power possible.

turning diameter over bed 2000 mm︱turning diameter over slide rest 1500 mm︱centre distance 6000 mm︱Control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. 28 t︱dimensions of the machine ca. m︱

---

Complete renovation in 2013, (for 410,000 EUR) according to UVV (safety barrier and light barriers) New electrics, new electronics, new motors, new drives, new spindle bearings, ball screws, etc. Control SIEMENS 840 D with HR in the protected operating position Turning diameter over bed = 2000 mm Turning diameter over slide = 1500 mm 4 jaw chucks - face plate diameter = 1650 mm Maximum speed = 130 rpm Max revolution special operating mode = 4.4 1 / min Distance between centers = 6000 mm Max. Workpiece weight = 10000 kg Tailstock with center points Grinding device for external grinding, face grinding, grinding speed up to 10,000 rpm Belt grinding device for superfinishing Chip conveyor Various steady rests and accessories. Weight machine approx. 28,000 kg

turning diameter over bed 1250 mm︱turning diameter over slide rest 1000 mm︱turning length 11000 mm︱total power requirement kW︱weight of the machine ca. 49 t︱dimensions of the machine ca. m︱

---

Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual

turning diameter over bed 2000 mm︱turning diameter over slide rest 1680 mm︱turning length 17000 mm︱centre height 1000 mm︱max. workpiece weight between centres 30000 kg︱spindle turning speed range 0,8 - 160 U/min︱spindle bore 105 mm︱bed width 1600 mm︱bed height over floor 600 mm︱main drive 75 kW︱tailstock quill diameter 280 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱steady-rests 3 Stück (pieces) ︱D.R.O. X-Achse (axis) ︱

---

turning diameter over bed 1260 mm︱turning diameter over slide rest 1000 mm︱turning length 7000 mm︱Control Heidenhain Manual Plus ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Completely overhauled 1999-2000 Control: Heidenhain Manual Plus CNC Swing diameter over the bed: 1260 mm Swing diameter over the cross slides: 1000 mm Turning length: max. 7000 mm Bed length: 8500 mm Centre height: 630 mm Work piece weight between centres: max. 20000 kg Work piece weight between centres with steadies: max. 30000 kg Feeds: X 0 - 1440 mm/min. Z 0 - 3600 mm/min. Spindle drive motor rating: 56 KW Spindle speeds: 0.56 - 280 rpm Chuck diameter: 1260 mm Chuck type: faceplate Diameter in steadies: 150 / 630 mm Tool bite size: 70 mm Equipped with: Taper turning; Thread cutting; Coolant unit; Boring bar holder; Chip conveyor

turning diameter 1100 mm︱turning length 6000 mm︱control Heidenhain MANUALplus ︱total power requirement kW︱weight of the machine ca. 15,1 t︱dimensions of the machine ca. 10,58 x 2,77 x 2,31 m︱

---

CNC-Lathe, cycle-controlled, with ONLY 490 working hours ! Equipment / Accessories: - ZF drive, 2 steps - automatic central lubrication - chip conveyor - 2 pcs. steady rests - various Multifix steel holders - documentation turning diameter 1100 mm turning length 6000 mm control Heidenhain MANUALplus 620 Max. swing diameter over bed 1120 mm Swing diameter over cross slide 820 mm slide travel facial 600 mm spindle bore 132 mm spindle taper 140 metr main spindle drive (at 60% ED) 46 kW Speed range 1-1800 rpm feed range - face slide / stepless 0,001-1000 mm/r feed range - longitudinal slide /stepless 0,001-2000 mm/r thread pitch min. 0,01 mm thread pitch max. 999,9 mm rapid travel - longitudinal/face 10/5 m/min diameter of quill 125 mm quill travel 280 mm taper MK 6

turning diameter 360 mm︱turning length 820 mm︱control Heidenhain MANUALplus 4110︱travel -z axis 890 mm︱swing diameter over flat guideway 475 mm︱swing diameter over face slide 260 mm︱cross movement 260 mm︱main drive motor 22/19,5/17 kW︱transmission ratio 2 ︱spindle turning speed range 1 - 3000 U/min︱spindle diameter in front bearing 110 mm︱rapid travel - longitudinal/face 10/5 m/min︱power feed longitudinal 9000 N︱power feed coss 6000 N︱tailstock quill taper MT 5 ︱tailstock quill diameter 70 mm︱tailstock quill stroke 120 mm︱total power requirement kW︱weight of the machine ca. 2,9 t︱dimensions of the machine ca. 4150 x 2825 x 1700 mm︱

---

Equipped with: Control Heidenhain MANUALplus 4110 Toolholder and boring holder Chip conveyor Hydraulic unit for power-chuck Documentation Without chuck.

turning diameter 530 mm︱turning length 2000 mm︱control Fagor CNC 8055 T ︱total power requirement 13 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 5000 x 2000 x 1900 mm︱

---

The machine is in very good condition. CNC control FAGOR 8055 T 8-station disc turret BARUFFALDI TS 160/8 Turning diameter over guide bed 530 mm Turning diameter over longitudinal slide 475 mm Turning diameter over cross slide 315 mm Center height 260 mm Center distance 2000 mm Bed width 350 mm Bore main spindle 80 mm Main spindle nose CAMLOCK-n ° 8, DIN 55027-n ° 8 Spindle speeds stepless 0 - 2500 rpm Power main engine 11 kW Working feed Z and X axis 0-10000 mm / min. Rapid travels 15 m / min. Tailstock shaft diameter 82 mm Morse taper tailstock 5 MK Equipment: 3 jaw manual chuck, diameter 250 mm Various tool holders Steady rest Operating and programming instructions

turning diameter 570 mm︱turning length 1000 mm︱control SIEMENS 805 GA ︱swing diameter over slide rest 340 mm︱workpiece weight max. 1000 kg︱spindle bore 66 mm︱face stroke 340 mm︱spindle turning speed range 1 - 2500 U/min︱transmission ratio 2 ︱rapid travel - longitudinal/face 7 / 3,5 m/min︱tailstock quill diameter 70 mm︱tailstock quill stroke 160 mm︱tailstock quill taper MT 5 ︱power capacity 15 / 11 kW︱range L-W-H 2,85 x 1,82 x 1,75 m︱total power requirement 20 kW︱weight of the machine ca. 2,95 t︱

---

- Control (version S3), SIEMENS 805 GA - 2 off Toolholders Multifix size C - Coolant equipment Without chuck.

faceplate diameter 6000 mm︱swing diameter 8500 mm︱turning height 4600 mm︱Control Siemens 840 D ︱table load 165 t︱total power requirement kW︱weight of the machine ca. 250-300 t︱dimensions of the machine ca. m︱

---

CNC VTL with C-axis & milling unit Rebuild in 2013 with complete new servo motors and drives, control Siemens 840 D Specification : Turning diameter 8500 mm Turning height 4600 mm Table diameter 6000 mm Max. table loading capacity 165 tons Milling Ram size -450 X 500 mm Turning Ram size - 320 X 320 mm Milling Ram travel - 2000 mm Turning Ram travel - 2300 mm Tool taper ISO 50 With c-axis Milling function Main motor for c axis is 110 kw. New DC motor And for milling it is 5 kw servo motor with a big zero backlash gear box. Accessories and tooling with the machine.

faceplate diameter 8000 mm︱swing diameter 16000 mm︱turning height 3000 mm︱Control Siemens 840 D ︱ram head - vertical travel 2500 mm︱workpiece weight 250 t︱faceplate speeds: 16 U/min︱ram head - vertical travel 2500 mm︱milling spindle turning speed range: 1000 U/min︱tool taper HSK 100 ︱main drive motor 132 kW︱total power requirement kW︱weight of the machine ca. 420 t︱dimensions of the machine ca. m︱

---

- CNC-control SIEMENS 840 D - Boring and milling device - C-axis - Universal angular milling head

faceplate diameter 1600 mm︱swing diameter 1800 mm︱turning height 1500 mm︱Control Heidenhain ︱max. ram stroke 1200 mm︱faceplate turning speed range 0 - 200 U/min︱main drive motor 85 kW︱workpiece weight max. 8000 kg︱total power requirement kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 8,4 x 4,5 x 5,3 m︱

---

In 2007 geometrically overhauled and modernized (retrofit) * CNC-control HEIDENHAIN ManualPlus 4110 for following axes/spindles: - Right ram (axes X1 and Z1), faceplate (S) * D.R.O. make HEIDENHAIN ND 780 for following axes: - Left ram (axes X2 and Z2), crossrail * Two rams: - ram (right hand side) with 16-station ATC - ram (left hand side) with 4-station turret * Swarf conveyor

faceplate diameter 1400 mm︱swing diameter 1780 mm︱turning height 1050 mm︱ram head - vertical travel 750 mm︱Control ︱total power requirement 55 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 3500 x 3500 x 3500 (4000) mm︱

---

Retrofit 2010 Control HEIDENHAIN 4110

core drilling diameter max. 4 - 48 mm︱bore depth 2000 / 2500 mm︱swing diameter mm︱x-axis 3000 mm︱y-axis 1500 (vert.) mm︱z-axis 2000/2500 mm︱w-axis 600 mm︱b-axis 0-360° deg︱A-axis +/-25° deg︱tool taper SK 50 DIN 69871︱turning speeds 0-6000 U/min︱table surface area 2300 x 2500 mm︱table load max. 25 t︱feed range 0 - 15000 mm/min︱power capacity 16,25 kW︱total power requirement 40 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. m︱

---

5 Axes Coordinate Deephole Boring / Milling Machine Suitable for complete machining, deep hole boring, threading, countersinking, milling Machine equipment: - CNC-control HEIDENHAIN TNC 430 - ARTIS Tool breakage control - 20-station tool changer (pick up system) - 2 off steadies for deep hole boring - Swarf conveyor - Electron. handwheel - 3D probe - Flushing pump for the external coolant supply - Coolant equipment, tank size approx. 1000 l, pump capacity infinitely adjustable, flow rate 16 l/min at 70 bar up to max. 65 l/min at 18 bar, 15 kW - machine housing - including accessory package (holders, drill bushes etc.)

spindle diameter 130 mm︱x-travel 6000 mm︱y-travel 2500 mm︱Control HEIDENHAIN TNC 360 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

CNC control HEIDENHAIN TNC 360 Spindle diameter 130 mm Spindle taper ISO 50 Spindle speed max RPM 900 Travel size: X=6000 mm Y=2500 mm Z=900 mm W=360 mm Accessories: Facing head Rotary table TI 1800 Table surface 1800x2000 mm Table load 12500 kg Table movement 1200 mm Machine without floor plates