Réseau européen de revendeurs de machines de stockage

Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Klaus Rosenboom GmbH Werkzeugmaschinen-Handel GmbH - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe OKUMA Soarer L 270 E


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-47810 · CNC Lathe

          OKUMA - Soarer L 270 E - - 2002 - OSP- U 10 L

          Technical details
          turning diameter 270 mm︱turning length 500 mm︱swing dia. for chucking work 450 mm︱control OSP- U 10 L ︱dimensions 1 mm︱turning speeds 50- 4200 U/min︱drive capacity - spindle motor 7,5/5,5 kW︱spindle passage 52 mm︱rapid traverse 15/20 m/min︱number of tapers in turret head 12 direkt︱tail stock MK 5 ︱range L-W-H 1,95 x 1,75 x 1,7 m︱weight of the machine ca. 3,7 t︱
          Used CNC- Lathe - 3- Jaw chuck Ø 210 mm - Touch Setter - Chip conveyor - One Touch IGF dialog programming
            turning diameter 270 mm
            turning length 500 mm
            swing dia. for chucking work 450 mm
            control OSP- U 10 L
            dimensions 1 mm
            turning speeds 50- 4200 U/min
            drive capacity - spindle motor 7,5/5,5 kW
            spindle passage 52 mm
            rapid traverse 15/20 m/min
            number of tapers in turret head 12 direkt
            tail stock MK 5
            range L-W-H 1,95 x 1,75 x 1,7 m
            weight of the machine ca. 3,7 t
            Description :
            Used CNC- Lathe

            - 3- Jaw chuck Ø 210 mm
            - Touch Setter
            - Chip conveyor
            - One Touch IGF dialog programming
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center Doosan Puma 480 M


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-48310 · CNC Turning- and Milling Center

          Doosan - Puma 480 M - - 2013 - Fanuc 32i

          Technical details
          turning diameter 650 mm︱turning length 1000 mm︱spindle passage 165 mm︱control Fanuc 32i ︱number of controlled axis 3 ︱turning speed range 1500 U/min︱power requirement 45 kW︱max. torque on the spindle 2957 Nm︱rapid speed 16/20 m/min︱number of tapers in turret head 12 BMT 75 P︱number of driven tools in turret 12 BMT 75 P︱Spindel speed of driven tools 3000 U/min︱Spindelpower on driven tool 11 kW︱tail stock Ø 120 mm MT 6︱weight 10,5 t︱dimensions 5,55 x 2,15 x 2,2 m︱
          Heavy CNC- lathe with driven tools in good condition - 3-jaw chuck Ø 533 mm - some fixed toll holders - Tool pre- setter - chip conveyor - 3x driven tool holders - programmable tailstock - oil- skimmer
            turning diameter 650 mm
            turning length 1000 mm
            spindle passage 165 mm
            control Fanuc 32i
            number of controlled axis 3
            turning speed range 1500 U/min
            power requirement 45 kW
            max. torque on the spindle 2957 Nm
            rapid speed 16/20 m/min
            number of tapers in turret head 12 BMT 75 P
            number of driven tools in turret 12 BMT 75 P
            Spindel speed of driven tools 3000 U/min
            Spindelpower on driven tool 11 kW
            tail stock Ø 120 mm MT 6
            weight 10,5 t
            dimensions 5,55 x 2,15 x 2,2 m
            Description :
            Heavy CNC- lathe with driven tools in good condition

            - 3-jaw chuck Ø 533 mm
            - some fixed toll holders
            - Tool pre- setter
            - chip conveyor
            - 3x driven tool holders
            - programmable tailstock
            - oil- skimmer

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center HWACHEON HiEco 45 MC (HiTech 700)


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-45410 · CNC Turning- and Milling Center

          HWACHEON - HiEco 45 MC (HiTech 700) - - 2003 - Fanuc 18- TB

          Technical details
          turning diameter 700 mm︱turning length 2000 mm︱control Fanuc 18- TB ︱spindle passage 115 mm︱spindle nose A 2-11 ︱number of spindle speeds 1800 U/min︱spindle motor 30/37 kW︱max. torque on the spindle 3070 Nm︱Number of tools 12 BMT︱driven stations 6 BMT︱speed of driven tools 3000 U/min︱power of driven tools 3,7/ 5,5 kw︱rapid traverse 24 m/min︱tail stock MK 5; Ø 150 mm︱range L-W-H 6.000 x 2.370 x 2.750 mm︱weight of the machine ca. 16 t︱
          CNC- lathe with driven tools and steady - tool measuring - chip conveyor - hydr. steady SMW SLU 4 (Ø 50- 260 mm) - 6 bar coolant - 3- jaw chuck Kitagawa B 15 - 1 + 1 driven tool - some std. tooling - box way all axis
            turning diameter 700 mm
            turning length 2000 mm
            control Fanuc 18- TB
            spindle passage 115 mm
            spindle nose A 2-11
            number of spindle speeds 1800 U/min
            spindle motor 30/37 kW
            max. torque on the spindle 3070 Nm
            Number of tools 12 BMT
            driven stations 6 BMT
            speed of driven tools 3000 U/min
            power of driven tools 3,7/ 5,5 kw
            rapid traverse 24 m/min
            tail stock MK 5; Ø 150 mm
            range L-W-H 6.000 x 2.370 x 2.750 mm
            weight of the machine ca. 16 t
            Description :
            CNC- lathe with driven tools and steady

            - tool measuring - chip conveyor
            - hydr. steady SMW SLU 4 (Ø 50- 260 mm) - 6 bar coolant
            - 3- jaw chuck Kitagawa B 15 - 1 + 1 driven tool
            - some std. tooling - box way all axis
          62.500 €
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center OKUMA Mac Turn 250 W


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-45310 · CNC Turning- and Milling Center

          OKUMA - Mac Turn 250 W - - 2002 - OSP U 100 L

          Technical details
          turning diameter 530 mm︱turning length 1000 mm︱swing dia. 550 mm︱control OSP U 100 L ︱spindle bore 22/15 kW︱power capacity 38 - 3800 U/min︱spindle hollow 65 mm︱turning speed range 30/40/26 m/min︱number of tapers in turret head 7,5 kW︱power capacity - milling spindle 15 - 6000 U/min︱turning speed range - milling HSK 63 A ︱tool taper 44 Stück︱numbers of tools in magazin +80/-80 mm︱tail stock Gegenspindel/ sub spindle ︱speeds spindle 2 6000 U/min︱b-axis 210 °︱weight of the machine ca. 12,5 t︱dimensions 7,3 x 2,8 x 2,73 m︱
          7- Axis Turning/ Milling Centre with Milling head, sub spindle and barfeed magazin - milling head with b- axis 1° - Big Bore main spindle - sub spindle - b-axis 1° - chip conveyor - Touch Setter - IGF One Touch dialog programming - 3- jaw chuck Ø 250 mm main spindle - 3 jaw chuck Ø 150 mm sub spindel - Oil cooler - RotoClean - short barfeed magazin - parts catcher - hand wheel First Instalation 2004
            turning diameter 530 mm
            turning length 1000 mm
            swing dia. 550 mm
            control OSP U 100 L
            spindle bore 22/15 kW
            power capacity 38 - 3800 U/min
            spindle hollow 65 mm
            turning speed range 30/40/26 m/min
            number of tapers in turret head 7,5 kW
            power capacity - milling spindle 15 - 6000 U/min
            turning speed range - milling HSK 63 A
            tool taper 44 Stück
            numbers of tools in magazin +80/-80 mm
            tail stock Gegenspindel/ sub spindle
            speeds spindle 2 6000 U/min
            b-axis 210 °
            weight of the machine ca. 12,5 t
            dimensions 7,3 x 2,8 x 2,73 m
            Description :
            7- Axis Turning/ Milling Centre with Milling head, sub spindle and barfeed
            magazin

            - milling head with b- axis 1°
            - Big Bore main spindle
            - sub spindle
            - b-axis 1°
            - chip conveyor
            - Touch Setter
            - IGF One Touch dialog programming
            - 3- jaw chuck Ø 250 mm main spindle
            - 3 jaw chuck Ø 150 mm sub spindel
            - Oil cooler
            - RotoClean
            - short barfeed magazin
            - parts catcher
            - hand wheel

            First Instalation 2004
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center OKUMA Mac Turn 30- 1 SC 1000


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-46410 · CNC Turning- and Milling Center

          OKUMA - Mac Turn 30- 1 SC 1000 - - 1999 -

          Technical details
          turning diameter 500 mm︱turning length 1000 mm︱swing dia. 500 mm︱control OSP 7000 ︱spindle bore 22/15 kW︱power capacity 38 - 3800 U/min︱spindle hollow 72 mm︱turning speed range 20/12/25 m/min︱number of tapers in turret head 6,8/5,5 kW︱power capacity - milling spindle 100 - 6000 U/min︱turning speed range - milling BT 40 ︱tool taper 40 Stück︱numbers of tools in magazin 190 mm︱tail stock MK 5 ︱b-axis 1 °︱weight of the machine ca. 11,0 t︱dimensions 5,6 x 2,5 x 2,36 m︱
          5- Axis Turning/ Milling Centre with Milling head. - milling head with b- axis - Big Bore main spindle A2-8 - chip conveyor - Touch Setter - IGF One Touch dialog programming - 3- jaw chuck Ø 250 mm main spindle - hydr. steady SMW SLU 3.1 - programable tailstock - helicall cutting - syncro. tapping
            turning diameter 500 mm
            turning length 1000 mm
            swing dia. 500 mm
            control OSP 7000
            spindle bore 22/15 kW
            power capacity 38 - 3800 U/min
            spindle hollow 72 mm
            turning speed range 20/12/25 m/min
            number of tapers in turret head 6,8/5,5 kW
            power capacity - milling spindle 100 - 6000 U/min
            turning speed range - milling BT 40
            tool taper 40 Stück
            numbers of tools in magazin 190 mm
            tail stock MK 5
            b-axis 1 °
            weight of the machine ca. 11,0 t
            dimensions 5,6 x 2,5 x 2,36 m
            Description :
            5- Axis Turning/ Milling Centre with Milling head.
            - milling head with b- axis
            - Big Bore main spindle A2-8
            - chip conveyor
            - Touch Setter
            - IGF One Touch dialog programming
            - 3- jaw chuck Ø 250 mm main spindle
            - hydr. steady SMW SLU 3.1
            - programable tailstock
            - helicall cutting
            - syncro. tapping

          Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe CITIZEN E 32 IV / 3M4


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-48010 · Turning Automatic Lathe - swiss lathe

          CITIZEN - E 32 IV / 3M4 - - 1999 - Mitsubishi Meldas 500 L

          Technical details
          turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 250 in einem Zug mm︱bar material dia. 32 mm︱control Mitsubishi Meldas 500 L ︱number of controlled axis 7 ︱turning speed range 8000 U/min︱power requirement 5,5 kW︱Subspindel speed range 6000 U/min︱power requirement 2,2 kW︱number of tapers in turret head 10(20) + 10(20) ︱Spindel speed of driven tools 5000 U/min︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 7,0 x 1,9 x 1,9 m︱
          Sliding headstock lathe with 2 turrets, 1x Y- axis, driven tools and subspindle in very good condition. (medicine tetechnology) Equipment: - barfeeder-magazin FMB Turbo 5-42 - chipconveyor - some collets - many driven toolholders - many fixed toolholders - 10/20 positions/turret - 1x Y- axis - very well equipped
            turning diameter over bed 32 mm
            spindle passage 32 mm
            turning length 250 in einem Zug mm
            bar material dia. 32 mm
            control Mitsubishi Meldas 500 L
            number of controlled axis 7
            turning speed range 8000 U/min
            power requirement 5,5 kW
            Subspindel speed range 6000 U/min
            power requirement 2,2 kW
            number of tapers in turret head 10(20) + 10(20)
            Spindel speed of driven tools 5000 U/min
            weight of the machine ca. 3,5 t
            dimensions of the machine ca. 7,0 x 1,9 x 1,9 m
            Description :
            Sliding headstock lathe with 2 turrets, 1x Y- axis, driven tools
            and subspindle in very good condition. (medicine tetechnology)
            Equipment:
            - barfeeder-magazin FMB Turbo 5-42
            - chipconveyor
            - some collets
            - many driven toolholders
            - many fixed toolholders
            - 10/20 positions/turret
            - 1x Y- axis
            - very well equipped
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine EMAG VL 5


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-47010 · Vertical Turning Machine

          EMAG - VL 5 - - 2007 - Fanuc 18 iTB

          Technical details
          turning diameter 220 mm︱turning height 110 mm︱Control Fanuc 18 iTB ︱max. workpiecediameter 220 mm︱max. workpiece height 110 mm︱max. workpiece weight 40 kg︱Max. rpm 4500 min/-1︱power capacity - main spindel 27/18 kW︱max. Torque 303 Nm︱spindle bearing diameter 110 mm︱spindle nose 6 / DIN 55026 ︱C-Axis 0,01 °︱number of toolpositions 12 pos.︱tool taper VDI 40 DIN 69880︱Number of driven toolspositions 12 pos.︱max. speed driven tool stations 6.000 min/-1︱max. Torque 37 Nm︱x-axis 570 mm︱z-axis 200 mm︱rapid traverse X: 60 / Z: 30 m/min︱
          CNC-Pick-Up-Vertical-Lathe with driven tools - 13.480 h spindle on - chip conveyor - 3 jaw chuck Ø 200 mm - 4 driven tool holder - some fixed toolholder - parts belt for 14- 30 position
            turning diameter 220 mm
            turning height 110 mm
            Control Fanuc 18 iTB
            max. workpiecediameter 220 mm
            max. workpiece height 110 mm
            max. workpiece weight 40 kg
            Max. rpm 4500 min/-1
            power capacity - main spindel 27/18 kW
            max. Torque 303 Nm
            spindle bearing diameter 110 mm
            spindle nose 6 / DIN 55026
            C-Axis 0,01 °
            number of toolpositions 12 pos.
            tool taper VDI 40 DIN 69880
            Number of driven toolspositions 12 pos.
            max. speed driven tool stations 6.000 min/-1
            max. Torque 37 Nm
            x-axis 570 mm
            z-axis 200 mm
            rapid traverse X: 60 / Z: 30 m/min
            Description :
            CNC-Pick-Up-Vertical-Lathe with driven tools

            - 13.480 h spindle on
            - chip conveyor
            - 3 jaw chuck Ø 200 mm
            - 4 driven tool holder
            - some fixed toolholder
            - parts belt for 14- 30 position

          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal Okuma MA 40 HA


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-38811 · Machining Center - Horizontal

          Okuma - MA 40 HA - - 2001 - Okuma OSP U 100 M

          Technical details
          x-travel 560 mm︱y-travel 610 mm︱z-travel 560 mm︱control Okuma OSP U 100 M ︱size of pallet 400 x 400 mm︱Number of pallets 2 ︱b-axis 360 x 1 °︱table load 0,4 t︱speeds: 50 -15000 U/min︱power capacity - milling spindle 26/18,5 kW︱rapid speed 40 m/min︱no. of tools in the magazine 60 Stück︱tool taper HSK 63 A ︱internal coolant system feed 60 bar︱dimensions 4,2 x 2,5 x 2,75 m︱weight of the machine ca. 10 t︱
          Nice horizontal machining centre - internal coolant with filter - external electric hand wheel - chip conveyor - 3D Renishaw - Indactosyn (absolut scale) X/Y/Z- axis - I-MAP - Thermo- compensation - rigided tapping - tool life managment - tool lenght measuring - IGF Dialog- programming - 3,5" floppy disk
            x-travel 560 mm
            y-travel 610 mm
            z-travel 560 mm
            control Okuma OSP U 100 M
            size of pallet 400 x 400 mm
            Number of pallets 2
            b-axis 360 x 1 °
            table load 0,4 t
            speeds: 50 -15000 U/min
            power capacity - milling spindle 26/18,5 kW
            rapid speed 40 m/min
            no. of tools in the magazine 60 Stück
            tool taper HSK 63 A
            internal coolant system feed 60 bar
            dimensions 4,2 x 2,5 x 2,75 m
            weight of the machine ca. 10 t
            Description :
            Nice horizontal machining centre

            - internal coolant with filter
            - external electric hand wheel
            - chip conveyor
            - 3D Renishaw
            - Indactosyn (absolut scale) X/Y/Z- axis
            - I-MAP
            - Thermo- compensation
            - rigided tapping
            - tool life managment
            - tool lenght measuring
            - IGF Dialog- programming
            - 3,5" floppy disk

          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical SMTCL VMC 1100 B


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-38211 · Machining Center - Vertical

          SMTCL - VMC 1100 B - - 2015 - Siemens 828 D

          Technical details
          x-travel 1100 mm︱y-travel 610 mm︱z-travel 650 mm︱table surface area 1300 x 610 mm︱control Siemens 828 D ︱rapid traverse 32/32/30 m/min︱table load t︱turning speed range 10.000 U/min︱max. torque on the spindle Nm︱power capacity - milling spindle kW︱internal coolant system feed 20 bar︱no. of tools in the magazine 24 Stück︱tool taper SK 40 ︱weight of the machine ca. 6 t︱dimensions 4,2 x 2,2 x 2,7 m︱
          CNC- vertical machining centre. First instalation in 2017. - coolant through the spindel 20 bar with filter - chip conveyor - spindle oil cooler - external hand wheel - Siemens with Shop Mill
            x-travel 1100 mm
            y-travel 610 mm
            z-travel 650 mm
            table surface area 1300 x 610 mm
            control Siemens 828 D
            rapid traverse 32/32/30 m/min
            turning speed range 10.000 U/min
            internal coolant system feed 20 bar
            no. of tools in the magazine 24 Stück
            tool taper SK 40
            weight of the machine ca. 6 t
            dimensions 4,2 x 2,2 x 2,7 m
            Description :
            CNC- vertical machining centre. First instalation in 2017.

            - coolant through the spindel 20 bar with filter
            - chip conveyor
            - spindle oil cooler
            - external hand wheel
            - Siemens with Shop Mill

          Datasheet
          Request / Contact
          used  Machining Center - Vertical Quaser MV 204 CPL


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-39311 · Machining Center - Vertical

          Quaser - MV 204 CPL - - 2011 - Heidenhain iTNC 530

          Technical details
          x-travel 1500 mm︱y-travel 700 mm︱z-travel 610 mm︱table surface area 1700 x 700 mm︱control Heidenhain iTNC 530 ︱rapid traverse 36 m/min︱table load 2,0 t︱turning speed range 12000 U/min︱power capacity - milling spindle 30 kW︱max. torque on the spindle 191 Nm︱internal coolant system feed 20 bar︱tool taper SK 40 ︱no. of tools in the magazine 48 Stück︱dimensions 4,5 x 3,0 x 3,03 m︱weight of the machine ca. 10 t︱
          Big CNC- vertical machining centre with internal coolant - coolant through the spindel 20 bar - chip conveyor - rigid tapping - Big Plus spindle - external hand wheel
            x-travel 1500 mm
            y-travel 700 mm
            z-travel 610 mm
            table surface area 1700 x 700 mm
            control Heidenhain iTNC 530
            rapid traverse 36 m/min
            table load 2,0 t
            turning speed range 12000 U/min
            power capacity - milling spindle 30 kW
            max. torque on the spindle 191 Nm
            internal coolant system feed 20 bar
            tool taper SK 40
            no. of tools in the magazine 48 Stück
            dimensions 4,5 x 3,0 x 3,03 m
            weight of the machine ca. 10 t
            Description :
            Big CNC- vertical machining centre with internal coolant

            - coolant through the spindel 20 bar
            - chip conveyor
            - rigid tapping
            - Big Plus spindle
            - external hand wheel
          Datasheet
          Request / Contact
          used  Machining Center - Vertical DECKEL DMU 60 monoBlock


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-37511 · Machining Center - Vertical

          DECKEL - DMU 60 monoBlock - - 2010 - Heidenhain iTNC 530

          Technical details
          x-travel 730 mm︱y-travel 560 mm︱z-travel 560 mm︱Control Heidenhain iTNC 530 ︱table surface area 1000 x 600 mm︱turning speeds 24000 U/min︱tool magazin: 24 ︱tool taper HSK A 63 ︱rapid traverse 30 m/min︱range L-W-H 3,5 x 2,4 x 2,4 m︱spindle drive 26 kW︱total power requirement 50 kvA︱weight of the machine ca. 7,0 t︱
          3 axis machining centre - chip conveyor - wireless 3- D probe Heidenhain - coolant gun 2 bar/ 40 l/min - autom. shutdown after M30 - mode 4 (reduced speed with open door) - Oil dust collector 600 m3/h
            x-travel 730 mm
            y-travel 560 mm
            z-travel 560 mm
            Control Heidenhain iTNC 530
            table surface area 1000 x 600 mm
            turning speeds 24000 U/min
            tool magazin: 24
            tool taper HSK A 63
            rapid traverse 30 m/min
            range L-W-H 3,5 x 2,4 x 2,4 m
            spindle drive 26 kW
            total power requirement 50 kvA
            weight of the machine ca. 7,0 t
            Description :
            3 axis machining centre

            - chip conveyor - wireless 3- D probe Heidenhain
            - coolant gun 2 bar/ 40 l/min - autom. shutdown after M30
            - mode 4 (reduced speed with open door)
            - Oil dust collector 600 m3/h
          Datasheet
          Request / Contact
          used  Machining Center - Vertical Mazak Nexus 510 C


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-39111 · Machining Center - Vertical

          Mazak - Nexus 510 C - - 2003 - PC-Fusion CNC 640 M Nexus

          Technical details
          x-travel 1050 mm︱y-travel 510 mm︱z-travel 510 mm︱table surface area 1300 x 550 mm︱control PC-Fusion CNC 640 M Nexus ︱rapid traverse 36 m/min︱table load 1,2 t︱turning speed range 12000 U/min︱power capacity - milling spindle 18,5 kW︱internal coolant system feed 6 bar︱no. of tools in the magazine 30 Stück︱tool taper SK 40 ︱weight of the machine ca. 7,0 t︱dimensions 4,3 x 2,9 x 2,91 m︱
          CNC- vertical machining centre with internal coolant and boxways. - coolant through the spindel 6 bar - spiral chip conveyor - 1x chipconveyor with belt - Tool setter - external hand wheel - 3D probe
            x-travel 1050 mm
            y-travel 510 mm
            z-travel 510 mm
            table surface area 1300 x 550 mm
            control PC-Fusion CNC 640 M Nexus
            rapid traverse 36 m/min
            table load 1,2 t
            turning speed range 12000 U/min
            power capacity - milling spindle 18,5 kW
            internal coolant system feed 6 bar
            no. of tools in the magazine 30 Stück
            tool taper SK 40
            weight of the machine ca. 7,0 t
            dimensions 4,3 x 2,9 x 2,91 m
            Description :
            CNC- vertical machining centre with internal coolant and boxways.

            - coolant through the spindel 6 bar
            - spiral chip conveyor
            - 1x chipconveyor with belt
            - Tool setter
            - external hand wheel
            - 3D probe



          Datasheet
          Request / Contact
          used  Machining Center - Vertical Quaser MV 184 E


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-39211 · Machining Center - Vertical

          Quaser - MV 184 E - - 12/2011 - Heidenhain TNC 620

          Technical details
          x-travel 1020 mm︱y-travel 610 mm︱z-travel 610 mm︱table surface area 1.200 x 600 mm︱control Heidenhain TNC 620 ︱rapid traverse 32/32/24 m/min︱table load 0,5 t︱turning speed range 12000 U/min︱power capacity - milling spindle 17 kW︱internal coolant system feed 20 bar︱no. of tools in the magazine 30 Stück︱tool taper SK 40 ︱weight of the machine ca. 7,0 t︱dimensions 3,0 x 2,9 x 2,9 m︱
          CNC- vertical machining centre with internal coolant and 4th axis - coolant through the spindel 20 bar - conveyor - signal lamp - rigid tapping - Big Plus spindle - 4th axis with tail stock
            x-travel 1020 mm
            y-travel 610 mm
            z-travel 610 mm
            table surface area 1.200 x 600 mm
            control Heidenhain TNC 620
            rapid traverse 32/32/24 m/min
            table load 0,5 t
            turning speed range 12000 U/min
            power capacity - milling spindle 17 kW
            internal coolant system feed 20 bar
            no. of tools in the magazine 30 Stück
            tool taper SK 40
            weight of the machine ca. 7,0 t
            dimensions 3,0 x 2,9 x 2,9 m
            Description :
            CNC- vertical machining centre with internal coolant and 4th axis

            - coolant through the spindel 20 bar
            - conveyor
            - signal lamp
            - rigid tapping
            - Big Plus spindle
            - 4th axis with tail stock
          Datasheet
          Request / Contact

          Universal Milling and Boring Machine

          used  Universal Milling and Boring Machine DECKEL FP 4- 60 T


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-10212 · Universal Milling and Boring Machine

          DECKEL - FP 4- 60 T - - 1994 - Dialog 11

          Technical details
          x-travel 600 mm︱y-travel 500 mm︱z-travel 450 mm︱control Dialog 11 ︱turning speed range - main spindle 31,5-5.000 U/min︱power capacity - main spindel 7,5 kW︱tool taper SK 40 ︱table surface area Ø 500 mm︱Tool-Presetter: 30 Stück︱feeds: ︱rapid travel ( X / Y / Z ) 6 m / min. m/min︱weight of the machine ca. 4,3 t︱dimensions of the machine ca. 3,5 x 2,4 x 2,2 L/B/H m︱
          Universal Milling- and Boring Machine - full covered - coolant system - NC- rotary table - tool changer
            x-travel 600 mm
            y-travel 500 mm
            z-travel 450 mm
            control Dialog 11
            turning speed range - main spind. 31,5-5.000 U/min
            power capacity - main spindel 7,5 kW
            tool taper SK 40
            table surface area Ø 500 mm
            Tool-Presetter: 30 Stück
            rapid travel ( X / Y / Z ) 6 m / min. m/min
            weight of the machine ca. 4,3 t
            dimensions of the machine ca. 3,5 x 2,4 x 2,2 L/B/H m
            Description :
            Universal Milling- and Boring Machine

            - full covered
            - coolant system
            - NC- rotary table
            - tool changer
          9.900 €
          Datasheet
          Request / Contact

          Band Saw - Automatic - Horizontal

          used  Band Saw - Automatic - Horizontal Kasto Twin A4


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-6917 · Band Saw - Automatic - Horizontal

          Kasto - Twin A4 - - 2008 - Kasto Compact Control

          Technical details
          cutting diameter 400 mm︱saw band length 5700 mm︱cutting width 1,3 mm︱Control Kasto Compact Control ︱cutting width at rectangle material 400 x 400 mm︱feed length 600 mm︱cutting speed 20- 130 m/min︱drive motor 4,0 kW︱range L-W-H 2,42 x 2,4 x 1,75 m︱weight of the machine ca. 2,42 t︱
          full hydraulic automatic band saw with double coloum - chip conveyor - 2x linear sliedeways - coolant system - hydraulic band clamping
            cutting diameter 400 mm
            saw band length 5700 mm
            cutting width 1,3 mm
            Control Kasto Compact Control
            cutting width at rectangle mater. 400 x 400 mm
            feed length 600 mm
            cutting speed 20- 130 m/min
            drive motor 4,0 kW
            range L-W-H 2,42 x 2,4 x 1,75 m
            weight of the machine ca. 2,42 t
            Description :
            full hydraulic automatic band saw with double coloum

            - chip conveyor
            - 2x linear sliedeways
            - coolant system
            - hydraulic band clamping


          Datasheet
          Request / Contact
          used  Band Saw - Automatic - Horizontal JAESPA Compact 3


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-6217 · Band Saw - Automatic - Horizontal

          JAESPA - Compact 3 - - 2005 -

          Technical details
          cutting diameter 320 mm︱band length 4660 x 34 x 1,1 mm︱cutting lenght max. 1100 mm︱sawing motor 4,0 kW︱weight of the machine ca. 2,6 t︱range L-W-H 2,8 x 2,0 x 2,0 mm︱
          used 2 coloumn automatic bandsaw - chip conveyor - coolant system - Mitsubishi E 1032 control - some bands - 320 x 320 mm cutting area - package clamping
            cutting diameter 320 mm
            band length 4660 x 34 x 1,1 mm
            cutting lenght max. 1100 mm
            sawing motor 4,0 kW
            weight of the machine ca. 2,6 t
            range L-W-H 2,8 x 2,0 x 2,0 mm
            Description :
            used 2 coloumn automatic bandsaw

            - chip conveyor
            - coolant system
            - Mitsubishi E 1032 control
            - some bands
            - 320 x 320 mm cutting area
            - package clamping
          Datasheet
          Request / Contact

          Clamping Cube

          used  Clamping Cube UNBEKANNT


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-5521 · Clamping Cube

          UNBEKANNT - - - 2000 -

          Technical details
          length 140 mm︱width 140 mm︱height 500 mm︱weight of the machine ca. 0,1 t︱
          clamping cube for machining centre , 4 pcs. available. price per piece There is a socket of 300 x 200 x 120 mm, totaly hight 620 mm
            length 140 mm
            width 140 mm
            height 500 mm
            weight of the machine ca. 0,1 t
            Description :
            clamping cube for machining centre , 4 pcs. available. price per piece

            There is a socket of 300 x 200 x 120 mm, totaly hight 620 mm
          Datasheet
          Request / Contact

          screw compressor

          used  screw compressor Mark Compressors MSB 15/10


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-1331 · screw compressor

          Mark Compressors - MSB 15/10 - - 2004 -

          Technical details
          feed pressure 10 bar︱liter capacity 2.200 l/min︱total power requirement 15 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,3 x 0,8 x 1,2 m︱
          Screw compressor with tank, dryer and carbon filter - screw compessor (last big service 01/2020; 33.905 h) - Tank 1.000 ltr., build: 1999, max 16 bar appr. Ø 800 x 2.500 mm - dryer Hertz HRD 220, 216 m3/h, max 16 bar 750 x 500 x 630 mm; 0,7 kw - carbon filter (last service 01/2020) 650 x 400 x 1.000 mm
            feed pressure 10 bar
            liter capacity 2.200 l/min
            total power requirement 15 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,3 x 0,8 x 1,2 m
            Description :
            Screw compressor with tank, dryer and carbon filter

            - screw compessor (last big service 01/2020; 33.905 h)
            - Tank 1.000 ltr., build: 1999, max 16 bar
            appr. Ø 800 x 2.500 mm
            - dryer Hertz HRD 220, 216 m3/h, max 16 bar
            750 x 500 x 630 mm; 0,7 kw
            - carbon filter (last service 01/2020)
            650 x 400 x 1.000 mm
          Datasheet
          Request / Contact

          Toolholder

          used  Toolholder ROSENBOOM Werkzeugwagen


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-155 · Toolholder

          ROSENBOOM - Werkzeugwagen - - 2020 -

          Technical details
          Number of tools 36 St.︱dimensions 0,72 x 0,56x 0,95 m︱weight 27 kg︱
          New movable tool trolley for toolholders with 40' taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.
            Number of tools 36 St.
            dimensions 0,72 x 0,56x 0,95 m
            weight 27 kg
            Description :
            New movable tool trolley for toolholders with 40' taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.
          Datasheet
          Request / Contact
          used  Toolholder ROSENBOOM Werkzeugwagen


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-1355 · Toolholder

          ROSENBOOM - Werkzeugwagen - - 2020 -

          Technical details
          Number of tools 30 St.︱dimensions 0,72 x 0,56x 0,95 m︱weight 27 kg︱
          New movable tool trolley for toolholders with 50' taper. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.
            Number of tools 30 St.
            dimensions 0,72 x 0,56x 0,95 m
            weight 27 kg
            Description :
            New movable tool trolley for toolholders with 50' taper. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.

          Datasheet
          Request / Contact

          Vise

          used  Vise SCHRAUBSTOCK HYD. Hydraulisch


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-555 · Vise

          SCHRAUBSTOCK HYD. - Hydraulisch - - 1990 -

          Technical details
          thickness of jaw 200 mm︱weight of the machine ca. 100 kg︱dimensions of the machine ca. 700 x 230 x 170 mm cm︱
            thickness of jaw 200 mm
            weight of the machine ca. 100 kg
            dimensions of the machine ca. 700 x 230 x 170 mm cm
          Datasheet
          Request / Contact

          Suction

          used  Suction IFS IFE 2000


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-2955 · Suction

          IFS - IFE 2000 - - 2008 -

          Technical details
          air flow quantity 2000 m³/h︱power capacity 0,75 kW︱amperage - max. 2,5 A︱weight 120 kg︱Dimensions (HxWxD) 1350 x 650 x 650 mm︱
          used hydro static oil dust collector underlying suction connection very good condition
            air flow quantity 2000 m³/h
            power capacity 0,75 kW
            amperage - max. 2,5 A
            weight 120 kg
            Dimensions (HxWxD) 1350 x 650 x 650 mm
            Description :
            used hydro static oil dust collector

            underlying suction connection

            very good condition
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          Klaus Rosenboom GmbH Werkzeugmaschinen-Handel GmbH  28307 Bremen Oppenheimer Str. 19
          Klaus Rosenboom GmbH Werkzeugmaschinen-Handel GmbH

          Oppenheimer Str. 19



          Contact Trader


            Klaus Rosenboom GmbH Werkzeugmaschinen-Handel GmbH
           Oppenheimer Str. 19
            28307 Bremen
           
            +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
            info@rosenboom-wzm.de
            www.rosenboom-wzm.de
            Contact person:

           




          Machine category


          Absaugung · Aufspannwürfel · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Vertikal · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Langdrehautomat · Schraubenkompressor · Schraubstock · Universal-Fräs- und Bohrmaschine · Vertikaldrehmaschine · Werkzeughalter ·