Réseau européen de revendeurs de machines de stockage

Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Karl Günter Wirths GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe KNUTH Universa 550 V


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000118 · Center Lathe

          KNUTH - Universa 550 V - - 2010 -

          Technical details
          turning diameter over bed 0250 mm︱turning diameter over slide rest 160 mm︱turning length 550 mm︱spindle turning speed range 50- 2500 U/min︱feed per revolution 0,07 - 0,40 mm/U︱voltage 220 V︱total power requirement 0,5/0,75 kW︱weight of the machine ca. 180 kg︱dimensions of the machine ca. 1,2 x 1 x 1 m︱
          With chuck, Mutifix holder, drilling tool holder and more.
            turning diameter over bed 0250 mm
            turning diameter over slide rest 160 mm
            turning length 550 mm
            spindle turning speed range 50- 2500 U/min
            feed per revolution 0,07 - 0,40 mm/U
            voltage 220 V
            total power requirement 0,5/0,75 kW
            weight of the machine ca. 180 kg
            dimensions of the machine ca. 1,2 x 1 x 1 m
            Description :
            With chuck, Mutifix holder, drilling tool holder and more.
          Datasheet
          Request / Contact
          used  Center Lathe STANKOIMPORT 1 M 63 B x 2800


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000121 · Center Lathe

          STANKOIMPORT - 1 M 63 B x 2800 - - 1982 -

          Technical details
          turning diameter over bed 0630 mm︱turning diameter over slide rest 350 mm︱turning length 2800 mm︱centre height 315 mm︱centre distance 2800 mm︱spindle bore 73 mm︱speeds 10 - 1250 U/min︱feeds longitudinal slide 0,06 - 1,4 mm/U︱feeds cross slide 0,024 - 0,518 mm/U︱weight of the machine ca. 5,6 t︱dimensions of the machine ca. 4,95 x 1,78 x 1,49 m︱voltage 380 V︱
            turning diameter over bed 0630 mm
            turning diameter over slide rest 350 mm
            turning length 2800 mm
            centre height 315 mm
            centre distance 2800 mm
            spindle bore 73 mm
            speeds 10 - 1250 U/min
            feeds longitudinal slide 0,06 - 1,4 mm/U
            feeds cross slide 0,024 - 0,518 mm/U
            weight of the machine ca. 5,6 t
            dimensions of the machine ca. 4,95 x 1,78 x 1,49 m
            voltage 380 V
            Description :

          Datasheet
          Request / Contact
          used  Center Lathe MONDIALE Celtic 14


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000120 · Center Lathe

          MONDIALE - Celtic 14 - - 1981 -

          Technical details
          turning diameter over bed 0370 mm︱turning diameter over slide rest 240 mm︱turning length 1500 mm︱spindle turning speed range 36- 1600 U/min︱voltage 400 V︱feed per revolution mm︱rapid travel - longitudinal/face m/min︱spindle bore 35 mm︱total power requirement 3 kW︱weight of the machine ca. 1500 kg︱dimensions of the machine ca. 3 x 1,1 x 1,5 m︱
            turning diameter over bed 0370 mm
            turning diameter over slide rest 240 mm
            turning length 1500 mm
            spindle turning speed range 36- 1600 U/min
            voltage 400 V
            spindle bore 35 mm
            total power requirement 3 kW
            weight of the machine ca. 1500 kg
            dimensions of the machine ca. 3 x 1,1 x 1,5 m
            Description :

          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe GILDEMEISTER GD 200


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203407 · CNC Lathe

          GILDEMEISTER - GD 200 - - 1985 - EPM

          Technical details
          turning diameter 0400 mm︱turning length 700 mm︱control EPM ︱total power requirement 17 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,5 x 2 x 2 m︱
          Machine has EPM control. It is working , but could be used also as spare part supply.
            turning diameter 0400 mm
            turning length 700 mm
            control EPM
            total power requirement 17 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,5 x 2 x 2 m
            Description :
            Machine has EPM control. It is working , but could be used also as spare part
            supply.
          Datasheet
          Request / Contact

          Facing and Centering Lathe

          used  Facing and Centering Lathe ZERBST WMW DP1S3


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2020 · Facing and Centering Lathe

          ZERBST WMW - DP1S3 - - 1990 -

          Technical details
          turning diameter over bed 1600 mm︱turning diameter over slide rest 1000 mm︱turning length 4000 mm︱faceplate diameter 1250 mm︱turning diameter over bed 1600 mm︱spindle bore 100 mm︱spindle turning speed range 3,55 - 450 U/min︱max. workpiece weight between centers 10000 kg︱rapid traverse 6 m/min︱total power requirement 30 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 7 x 2,5 x 2,3 m︱
          Machines was reconditioned and modernized with new electrica in 2010. We will supply a fixed and a movable steady along with the machine. Furthermore we will supply some centers along with the machine.
            turning diameter over bed 1600 mm
            turning diameter over slide rest 1000 mm
            turning length 4000 mm
            faceplate diameter 1250 mm
            turning diameter over bed 1600 mm
            spindle bore 100 mm
            spindle turning speed range 3,55 - 450 U/min
            max. workpiece weight between ce. 10000 kg
            rapid traverse 6 m/min
            total power requirement 30 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 7 x 2,5 x 2,3 m
            Description :
            Machines was reconditioned and modernized with new electrica in 2010. We will
            supply a fixed and a movable steady along with the machine. Furthermore we will
            supply some centers along with the machine.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled CHALLENGER MICROTURN BNC 2680


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203403 · Lathe - cycle-controlled

          CHALLENGER MICROTURN - BNC 2680 - - 2012 - Fagor 8055 iT

          Technical details
          turning diameter 0680 mm︱turning length 2000 mm︱control Fagor 8055 iT ︱turning dia. over face-slide 410 mm︱turret head 8 Pos. ︱throat 870 x 280 mm︱bed width 405 mm︱max. workpiece weight between centers 2000 kg︱spindle turning speed range 80- 2400 U/min︱spindle bore 82 mm︱cross movement 345 mm︱longitudinal travel 2150 mm︱rapid traverse X-axis 15 m/min︱rapid traverse Z-axis 15 m/min︱total power requirement 15/22 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 4 x 2,4 x 2,4 m︱
          Accessories: 3 jaw chuck hand operated and 3 toolholder for turret VDI 40.
            turning diameter 0680 mm
            turning length 2000 mm
            control Fagor 8055 iT
            turning dia. over face-slide 410 mm
            turret head 8 Pos.
            throat 870 x 280 mm
            bed width 405 mm
            max. workpiece weight between ce. 2000 kg
            spindle turning speed range 80- 2400 U/min
            spindle bore 82 mm
            cross movement 345 mm
            longitudinal travel 2150 mm
            rapid traverse X-axis 15 m/min
            rapid traverse Z-axis 15 m/min
            total power requirement 15/22 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 4 x 2,4 x 2,4 m
            Description :
            Accessories: 3 jaw chuck hand operated and 3 toolholder for turret VDI 40.
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled SAILO Contur Dialog H 66


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203409 · Lathe - cycle-controlled

          SAILO - Contur Dialog H 66 - - 2003 - Siemens 810 D

          Technical details
          turning diameter 0660 mm︱turning length 2000 mm︱control Siemens 810 D ︱turning dia. over face-slide 400 mm︱turret head 8 Pos. ︱bed width 433 mm︱max. workpiece weight between centers 2000 kg︱spindle turning speed range 2- 2500 U/min︱spindle bore 105 mm︱cross movement 340 mm︱longitudinal travel 1980 mm︱rapid traverse X-axis 8 m/min︱rapid traverse Z-axis 8 m/min︱total power requirement 22 kW︱weight of the machine ca. 4,7 t︱dimensions of the machine ca. 4 x 2,3 x 2 m︱
          Accessories: 3 jaw chuck hand operated and 3 toolholder for turret VDI 40.
            turning diameter 0660 mm
            turning length 2000 mm
            control Siemens 810 D
            turning dia. over face-slide 400 mm
            turret head 8 Pos.
            bed width 433 mm
            max. workpiece weight between ce. 2000 kg
            spindle turning speed range 2- 2500 U/min
            spindle bore 105 mm
            cross movement 340 mm
            longitudinal travel 1980 mm
            rapid traverse X-axis 8 m/min
            rapid traverse Z-axis 8 m/min
            total power requirement 22 kW
            weight of the machine ca. 4,7 t
            dimensions of the machine ca. 4 x 2,3 x 2 m
            Description :
            Accessories: 3 jaw chuck hand operated and 3 toolholder for turret VDI 40.
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled GORNATI CMG 750 NSXP


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-203402 · Lathe - cycle-controlled

          GORNATI - CMG 750 NSXP - - 1999 - Fagor 8055 T

          Technical details
          turning diameter 1500 mm︱turning length 1500 mm︱control Fagor 8055 T ︱turning diameter over bed slide 1250 mm︱total power requirement 45 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4 x 2,4 x 2,4 m︱
          Zubehör: Vierbackenfutter mit Backen, manuell betätigt, 7 Multifix Halter und ein Halter auf Capto.
            turning diameter 1500 mm
            turning length 1500 mm
            control Fagor 8055 T
            turning diameter over bed slide 1250 mm
            total power requirement 45 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4 x 2,4 x 2,4 m
            Description :
            Zubehör: Vierbackenfutter mit Backen, manuell betätigt, 7 Multifix Halter und
            ein Halter auf Capto.
          Datasheet
          Request / Contact

          Mechanician s Lathe

          used  Mechanician s Lathe WEILER MDU 260


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-2000123 · Mechanician s Lathe

          WEILER - MDU 260 - - 1979 -

          Technical details
          turning diameter over bed 260 mm︱turning diameter over slide rest 150 mm︱turning length 400 mm︱turning speeds 140- 3550 U/min︱spindle bore 35 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 1,6 x 0,7 x 1,5 m︱
          With accessories !
            turning diameter over bed 260 mm
            turning diameter over slide rest 150 mm
            turning length 400 mm
            turning speeds 140- 3550 U/min
            spindle bore 35 mm
            total power requirement 1,5 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 1,6 x 0,7 x 1,5 m
            Description :
            With accessories !
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column DOERRIES VCE 125/160


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-40094 · Vertical Turret Lathe - Single Column

          DOERRIES - VCE 125/160 - - - S 840 D

          Technical details
          faceplate diameter 1250 mm︱swing diameter 1600 mm︱turning height 1400 mm︱Control S 840 D ︱faceplate turning speed range 0- 280 U/min︱workpiece weight max. 12000 kg︱tool change unit 10 Pos.︱total power requirement 95 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 3,5 x 3,2 x 5,1 m︱
          Machine was originally built in 1983 but retrofitted in 2007. Control: Siemens 840 D
            faceplate diameter 1250 mm
            swing diameter 1600 mm
            turning height 1400 mm
            Control S 840 D
            faceplate turning speed range 0- 280 U/min
            workpiece weight max. 12000 kg
            tool change unit 10 Pos.
            total power requirement 95 kW
            weight of the machine ca. 25 t
            dimensions of the machine ca. 3,5 x 3,2 x 5,1 m
            Description :
            Machine was originally built in 1983 but retrofitted in 2007. Control: Siemens
            840 D
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal MAUSER PS DUO


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10026 · Machining Center - Horizontal

          MAUSER - PS DUO - - 2007 - S 840 D

          Technical details
          x-travel 750 mm︱y-travel 850 mm︱z-travel 600 mm︱Control S 840 D ︱rapid travel x/y/z 50/50/70 m/min︱spindle turning speed - stepless 30 - 10000 U/min︱tool taper 80 HSK︱weight of tools max. 15 kg︱tool length - max. 400 mm︱tension force 20 kN︱tool diameter 120 (200) mm︱table-size 1600 x 650 mm︱distance between milling spindels 750 mm︱total power requirement 95 kVA︱weight of the machine ca. 27 t︱dimensions of the machine ca. 5 x 3 x 3 m︱
          Horizontal machining center with 2 spindles and swivable table for a four axes machining. Machine was used for machining of cylinder heads in the automotive Industry (8 cylinder motors). Machine has two automatic tool changing magazins with each 50 places. Control: Siemens 840 D Additional technical data: A- axes swivel positioning +/- 5 arc seconds. Chip to chip time is up to a tool weight of 4 kg = 4,5 sec. and 5 - 15 kg = 7 sec.
            x-travel 750 mm
            y-travel 850 mm
            z-travel 600 mm
            Control S 840 D
            rapid travel x/y/z 50/50/70 m/min
            spindle turning speed - stepless 30 - 10000 U/min
            tool taper 80 HSK
            weight of tools max. 15 kg
            tool length - max. 400 mm
            tension force 20 kN
            tool diameter 120 (200) mm
            table-size 1600 x 650 mm
            distance between milling spindel. 750 mm
            total power requirement 95 kVA
            weight of the machine ca. 27 t
            dimensions of the machine ca. 5 x 3 x 3 m
            Description :
            Horizontal machining center with 2 spindles and swivable table for a four axes
            machining. Machine was used for machining of cylinder heads in the automotive
            Industry (8 cylinder motors). Machine has two automatic tool changing magazins
            with each 50 places. Control: Siemens 840 D
            Additional technical data: A- axes swivel positioning +/- 5 arc seconds. Chip
            to chip time is up to a tool weight of 4 kg = 4,5 sec. and 5 - 15 kg = 7 sec.
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal KRAUSE & MAUSER PS DUO


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10025 · Machining Center - Horizontal

          KRAUSE & MAUSER - PS DUO - - 2007 - S 840 D

          Technical details
          x-travel 750 mm︱y-travel 850 mm︱z-travel 600 mm︱Control S 840 D ︱rapid travel x/y/z 50/50/70 m/min︱spindle turning speed - stepless 30 - 10000 U/min︱tool taper 80 HSK︱weight of tools max. 15 kg︱tool length - max. 400 mm︱tension force 20 kN︱tool diameter 120 (200) mm︱table-size 1600 x 650 mm︱distance between milling spindels 750 mm︱total power requirement 95 kVA︱weight of the machine ca. 27 t︱dimensions of the machine ca. 5 x 3 x 3 m︱
          Horizontal machining center with 2 spindles and swivable table for a four axes machining. Machine was used for machining of cylinder heads in the automotive Industry (8 cylinder motors). Machine has two automatic tool changing magazins with each 50 places. Control: Siemens 840 D Additional technical data: A- axes swivel positioning +/- 5 arc seconds. Chip to chip time is up to a tool weight of 4 kg = 4,5 sec. and 5 - 15 kg = 7 sec.
            x-travel 750 mm
            y-travel 850 mm
            z-travel 600 mm
            Control S 840 D
            rapid travel x/y/z 50/50/70 m/min
            spindle turning speed - stepless 30 - 10000 U/min
            tool taper 80 HSK
            weight of tools max. 15 kg
            tool length - max. 400 mm
            tension force 20 kN
            tool diameter 120 (200) mm
            table-size 1600 x 650 mm
            distance between milling spindel. 750 mm
            total power requirement 95 kVA
            weight of the machine ca. 27 t
            dimensions of the machine ca. 5 x 3 x 3 m
            Description :
            Horizontal machining center with 2 spindles and swivable table for a four axes
            machining. Machine was used for machining of cylinder heads in the automotive
            Industry (8 cylinder motors). Machine has two automatic tool changing magazins
            with each 50 places. Control: Siemens 840 D
            Additional technical data: A- axes swivel positioning +/- 5 arc seconds. Chip
            to chip time is up to a tool weight of 4 kg = 4,5 sec. and 5 - 15 kg = 7 sec.
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal DECKEL-MAHO DMU 60 T


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10163 · Machining Center - Universal

          DECKEL-MAHO - DMU 60 T - - 2000 -

          Technical details
          x-travel 0630 mm︱y-travel 560 mm︱z-travel 560 mm︱turning speeds 12.000 U/min︱feed speeds 20-10.000 mm/min︱ 26/26/20 m/min︱ 24-fach ︱spindle taper SK 40 ︱table surface area 1000x600 mm︱total power requirement 26 kW︱weight of the machine ca. 6.500 t︱dimensions of the machine ca. m︱
          Accessories: B-axe (Rotation of head), 24 Pos. ATC with 2 discs, electronic hand wheel, chip conveying worm and cooling arrangement. Machine has cooling through spindle. Control: Heidenhain 430
            x-travel 0630 mm
            y-travel 560 mm
            z-travel 560 mm
            turning speeds 12.000 U/min
            feed speeds 20-10.000 mm/min
            26/26/20 m/min
            24-fach
            spindle taper SK 40
            table surface area 1000x600 mm
            total power requirement 26 kW
            weight of the machine ca. 6.500 t
            Description :
            Accessories: B-axe (Rotation of head), 24 Pos. ATC with 2 discs, electronic
            hand wheel, chip conveying worm and cooling arrangement. Machine has cooling
            through spindle. Control: Heidenhain 430
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical MAZAK VTC 20 B


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10174 · Machining Center - Vertical

          MAZAK - VTC 20 B - - 2003 - Mazatrol M 32 B

          Technical details
          x-travel 1120 mm︱y-travel 510 mm︱z-travel 510 mm︱Control Mazatrol M 32 B ︱table-size 1460 x 510 mm︱feeds 1- 20000 mm/min︱rapid traverse 24/24/20 m/min︱spindle turning speed - stepless 40- 7000 U/min︱spindle taper ISO 40 ︱tool change unit 24 Pos.︱total power requirement 20 KVA︱weight of the machine ca. 5,85 t︱dimensions of the machine ca. 4,7 x 2,9 x 2,7 m︱
          Machine will be supplied with some tool holders and is ready for work.
            x-travel 1120 mm
            y-travel 510 mm
            z-travel 510 mm
            Control Mazatrol M 32 B
            table-size 1460 x 510 mm
            feeds 1- 20000 mm/min
            rapid traverse 24/24/20 m/min
            spindle turning speed - stepless 40- 7000 U/min
            spindle taper ISO 40
            tool change unit 24 Pos.
            total power requirement 20 KVA
            weight of the machine ca. 5,85 t
            dimensions of the machine ca. 4,7 x 2,9 x 2,7 m
            Description :
            Machine will be supplied with some tool holders and is ready for work.
          Datasheet
          Request / Contact
          used  Machining Center - Vertical MAZAK VTC 20 B


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10172 · Machining Center - Vertical

          MAZAK - VTC 20 B - - 1999 - Mazatrol M Plus

          Technical details
          x-travel 1120 mm︱y-travel 510 mm︱z-travel 510 mm︱Control Mazatrol M Plus ︱table-size 1460 x 510 mm︱feeds 1- 20000 mm/min︱rapid traverse 24/24/20 m/min︱spindle turning speed - stepless 40- 7000 U/min︱spindle taper ISO 40 ︱tool change unit 24 Pos.︱total power requirement 20 KVA︱weight of the machine ca. 5,85 t︱dimensions of the machine ca. 4,7 x 2,9 x 2,7 m︱
          Machine will be supplied with some tool holders and is ready for work. Machine comes with a chip conveyor.
            x-travel 1120 mm
            y-travel 510 mm
            z-travel 510 mm
            Control Mazatrol M Plus
            table-size 1460 x 510 mm
            feeds 1- 20000 mm/min
            rapid traverse 24/24/20 m/min
            spindle turning speed - stepless 40- 7000 U/min
            spindle taper ISO 40
            tool change unit 24 Pos.
            total power requirement 20 KVA
            weight of the machine ca. 5,85 t
            dimensions of the machine ca. 4,7 x 2,9 x 2,7 m
            Description :
            Machine will be supplied with some tool holders and is ready for work. Machine
            comes with a chip conveyor.
          Datasheet
          Request / Contact
          used  Machining Center - Vertical CHIRON FZ 12 S


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-10173 · Machining Center - Vertical

          CHIRON - FZ 12 S - - 1993 - Fanuc 0 M

          Technical details
          x-travel 0550 mm︱y-travel 300 mm︱z-travel 280 mm︱control Fanuc 0 M ︱table-size 950 x 660 mm︱spindle diameter 65 mm︱tool taper SK 30 ︱spindle turning speed - stepless 20 - 7100 U/min︱feeds 1- 20000 mm/min︱rapid traverse 20000 mm/min︱electrics - voltage/frequency 380 / 50 V/Hz︱spindle drive 5,5 kW︱weight of the machine ca. 3 t︱
          Control: Fanuc 0 M. Machine has a fourth axe as a horizontal dividing head.
            x-travel 0550 mm
            y-travel 300 mm
            z-travel 280 mm
            control Fanuc 0 M
            table-size 950 x 660 mm
            spindle diameter 65 mm
            tool taper SK 30
            spindle turning speed - stepless 20 - 7100 U/min
            feeds 1- 20000 mm/min
            rapid traverse 20000 mm/min
            electrics - voltage/frequency 380 / 50 V/Hz
            spindle drive 5,5 kW
            weight of the machine ca. 3 t
            Description :
            Control: Fanuc 0 M. Machine has a fourth axe as a horizontal dividing head.

          Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used  Milling Machining Centers 5 Axis HUBER + GRIMME HG3000T


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-26744 · Milling Machining Centers 5 Axis

          HUBER + GRIMME - HG3000T - - 1996 - NUM

          Technical details
          x-travel 3000 mm︱y-travel 2500 mm︱z-travel 400 mm︱Control NUM ︱c-axis 0-360 °︱b-axis 0-360 °︱spindle turning speed range 0- 30000 U/min︱rapid traverse 50 m/min︱total power requirement 12 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 4 x 3 x 2 m︱
          5 axes machining center to work on wood or plastic. Machine has two tables and 6 position tool changer (ATC) at each table.
            x-travel 3000 mm
            y-travel 2500 mm
            z-travel 400 mm
            Control NUM
            c-axis 0-360 °
            b-axis 0-360 °
            spindle turning speed range 0- 30000 U/min
            rapid traverse 50 m/min
            total power requirement 12 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 4 x 3 x 2 m
            Description :
            5 axes machining center to work on wood or plastic. Machine has two tables and
            6 position tool changer (ATC) at each table.
          Datasheet
          Request / Contact
          used  Milling Machining Centers 5 Axis HUBER + GRIMME HG 1400


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-26745 · Milling Machining Centers 5 Axis

          HUBER + GRIMME - HG 1400 - - 1995 - H+G

          Technical details
          x-travel 1400 mm︱y-travel 1000 mm︱z-travel 300 mm︱Control H+G ︱c-axis 0-360 °︱b-axis 0-360 °︱spindle turning speed range 0- 30000 U/min︱rapid traverse 50 m/min︱total power requirement 6 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 3 x 2 x 3 m︱
          5 axes machining center to work on wood or plastic. CNC CONTROL OF THAT MACHINE IS DEFECT AND HAS TO BE REPAIRED BY THE BUYER ! MACHINE COULD BE USED FOR SPARE PART SUPPLY !
            x-travel 1400 mm
            y-travel 1000 mm
            z-travel 300 mm
            Control H+G
            c-axis 0-360 °
            b-axis 0-360 °
            spindle turning speed range 0- 30000 U/min
            rapid traverse 50 m/min
            total power requirement 6 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 3 x 2 x 3 m
            Description :
            5 axes machining center to work on wood or plastic. CNC CONTROL OF THAT MACHINE
            IS DEFECT AND HAS TO BE REPAIRED BY THE BUYER ! MACHINE COULD BE USED FOR SPARE
            PART SUPPLY !
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine ABOGA A 4008


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-50021 · Pillar Drilling Machine

          ABOGA - A 4008 - - 2000 -

          Technical details
          bore capacity in steel (diameter) 35 mm︱throat 330 mm︱bore stroke 200 mm︱bore capacity in cast iron 40 mm︱spindle cone MT 4 ︱spindle turning speed range 30- 1500 U/min︱table-size 400 x 330 mm︱T-slot - width 15 mm︱distance spindle /table 0- 1000 mm︱column diameter 200 mm︱feeds 0,10/0,16/0,24/0,33 mm/U︱total power requirement 1,5 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 1 x 1 x 1,9 m︱
            bore capacity in steel (diameter. 35 mm
            throat 330 mm
            bore stroke 200 mm
            bore capacity in cast iron 40 mm
            spindle cone MT 4
            spindle turning speed range 30- 1500 U/min
            table-size 400 x 330 mm
            T-slot - width 15 mm
            distance spindle /table 0- 1000 mm
            column diameter 200 mm
            feeds 0,10/0,16/0,24/0,33 mm/U
            total power requirement 1,5 kW
            weight of the machine ca. 320 kg
            dimensions of the machine ca. 1 x 1 x 1,9 m
          Datasheet
          Request / Contact

          Milling Machine - Vertical

          used  Milling Machine - Vertical FRITZ WERNER FV 4


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-11231 · Milling Machine - Vertical

          FRITZ WERNER - FV 4 - - 1967 -

          Technical details
          table-size 1800 x 400 mm︱revolutions per minute 18 - 1800 U/min︱tool adaptor ISO 50 ︱table longitudinal travel 1500 mm︱table cross travel 450 mm︱vertical movement 600 mm︱distance table - lower edge spindle 50 - 650 mm︱feeds 0 - 2000 mm/min︱rapid traverse 2 m/min︱weight of the machine ca. 6 t︱table load 0,8 t︱
            table-size 1800 x 400 mm
            revolutions per minute 18 - 1800 U/min
            tool adaptor ISO 50
            table longitudinal travel 1500 mm
            table cross travel 450 mm
            vertical movement 600 mm
            distance table - lower edge spin. 50 - 650 mm
            feeds 0 - 2000 mm/min
            rapid traverse 2 m/min
            weight of the machine ca. 6 t
            table load 0,8 t
            Description :

          Datasheet
          Request / Contact

          Universal Milling Machine

          used  Universal Milling Machine DECKEL- MAHO DMG FP 2 A


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1111167 · Universal Milling Machine

          DECKEL- MAHO DMG - FP 2 A - - 1988 - TNC 355

          Technical details
          x-travel 0300 mm︱y-travel 300 mm︱z-travel 400 mm︱table surface area 620 x 390 mm︱tool taper SK 40 ︱feed 2- 3600 mm/min︱rapid traverse 4 m/min︱turning speeds 40- 4000 U/min︱Control TNC 355 ︱total power requirement 12 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 1,8 x 2 x 1,9 m︱
          Machine has Heidenhain TNC 355.
            x-travel 0300 mm
            y-travel 300 mm
            z-travel 400 mm
            table surface area 620 x 390 mm
            tool taper SK 40
            feed 2- 3600 mm/min
            rapid traverse 4 m/min
            turning speeds 40- 4000 U/min
            Control TNC 355
            total power requirement 12 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 1,8 x 2 x 1,9 m
            Description :
            Machine has Heidenhain TNC 355.
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used  Gear Hobbing Machine - Vertical TOS FO16


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1765 · Gear Hobbing Machine - Vertical

          TOS - FO16 - - 1979 -

          Technical details
          max. wheel diameter 1600 mm︱gear width 560 mm︱max. module 16 ︱min. module 4 ︱table dia. 1350 mm︱table load capacity 7000 kg︱weight of the machine ca. 18 t︱dimensions of the machine ca. 4 x 2,5 x 2,5 m︱
          With Tengential head With change gears Without steady.
            max. wheel diameter 1600 mm
            gear width 560 mm
            max. module 16
            min. module 4
            table dia. 1350 mm
            table load capacity 7000 kg
            weight of the machine ca. 18 t
            dimensions of the machine ca. 4 x 2,5 x 2,5 m
            Description :
            With Tengential head
            With change gears
            Without steady.
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical LIEBHERR ET 1500


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1762 · Gear Hobbing Machine - Vertical

          LIEBHERR - ET 1500 - - 1973 -

          Technical details
          max. wheel diameter 1500 mm︱gear width 280 mm︱max. module 14 ︱min. module 1 ︱table diameter 1400 mm︱total power requirement 86 kW︱weight of the machine ca. 23 t︱dimensions of the machine ca. 4 x 2,4 x 2,4 m︱
          Internal gear gasher for single teeth cutting. Machine was completly reconditioned in 2007 ! Machine comes along with a sound protection cabine, chnage gears and other equipment.
            max. wheel diameter 1500 mm
            gear width 280 mm
            max. module 14
            min. module 1
            table diameter 1400 mm
            total power requirement 86 kW
            weight of the machine ca. 23 t
            dimensions of the machine ca. 4 x 2,4 x 2,4 m
            Description :
            Internal gear gasher for single teeth cutting.
            Machine was completly reconditioned in 2007 !
            Machine comes along with a sound protection cabine, chnage gears and other
            equipment.
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical CUGIR ? FD 320


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-1767 · Gear Hobbing Machine - Vertical

          CUGIR ? - FD 320 - - 1957 -

          Technical details
          max. wheel diameter 0320 mm︱gear width 200 mm︱max. module 6 ︱min. module 1 ︱total power requirement 3 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,1 x 1,2 x 2,1 m︱
          With change gears.
            max. wheel diameter 0320 mm
            gear width 200 mm
            max. module 6
            min. module 1
            total power requirement 3 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,1 x 1,2 x 2,1 m
            Description :
            With change gears.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

            Profil de commerçant: Karl Günter Wirths GmbH

          Contacter le commerçant



            Wirths Günter Karl GmbH
           Scharpenberger rue 96-98
            58256 Ennepetal
            Allemagne
            02333-79050 "> 02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net

          Profil de commerçant

          Qui sommes-nous? - Wirths GmbH in Ennepetal

          wirths gmbh.Karl G. Wirths a fondé la société à 1956 en tant qu’atelier mécanique. 1961 a développé un magasin de matrices pour le moulage et le matriçage. À cette époque, les employés de 30 travaillaient comme fabricants de matrices dans l’atelier.
           
          Parallèlement, Karl G. Wirths a ouvert un atelier de rénovation de machines-outils. Ce fut également le début pour le secteur des machines-outils.

          Le magasin de matrices était fermé 1972 mais le commerce des machines-outils a été développé.

          En 1972, le premier stock a été érigé. Jusqu'à présent des bâtiments d'une capacité de grue allant jusqu'à 50 t.

          Dans ce stock, nous gardons toujours env. Machines 250.

          Nous ne sommes pas concentrés sur une activité ponctuelle, mais sur une relation à long terme avec nos clients nationaux et les clients de tous les pays du monde.

          Contact

          Wirth GmbHWirths Günter Karl GmbH
          Scharpenberger Str. 96-98
          D-58256 Ennepetal / Allemagne




          Karl Günter Wirths GmbH   58256 Ennepetal Scharpenberger Strasse 96-98 Deutschland
          Karl Günter Wirths GmbH

          Scharpenberger Strasse 96-98



          Contact Trader


            Karl Günter Wirths GmbH
           Scharpenberger Strasse 96-98
            58256 Ennepetal
            Deutschland
            02333-79050
            02333-790555
            sales@wirths.net
            www.wirths.net
            Contact person:

           
          ACHTUNG: NEUE FAX Nr. 02333 790555




          Machine category


          Abkantpresse - hydraulisch · Anreißplatte · Aufspannplatte · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohrwerkstisch · Bügelsäge · Bügelsäge - Automatisch · CNC Drehmaschine · Doppelgehrungssäge · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Dreiwalzen - Blechbiegemaschine · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Endenbearbeitungsmaschine · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Gabelstapler · Handhebel-Schere · Innenschleifmaschine · Karusselldrehmaschine - Einständer · Kreissäge - Automatisch · Kühlmittelanlage · Mechanikerdrehbank · Messmaschine · Plan- und Spitzendrehbank · Plattenfeld · Pneumatische Presse · Profil- Ring- Biegemaschine · Querteilanlage · Richtmaschine · Richtplatte · Richtpresse - Einständer · Rohrbiegemaschine · Rundschleifmaschine · Rundtisch-Bohrungs-Schleifmaschine · Schleifbock · Schwenkbiegemaschine · Senkerodiermaschine · Spindelpresse · Spitzendrehmaschine · Stangenzuführung · Stanzautomat-Doppelständer · Säulenbohrmaschine · Tafelschere - hydraulisch · Tuschierpresse · Werkzeug Voreinstellgerät · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradstossmaschine ·