turning diameter 700 mm︱turning length 3.100 mm︱control FAGOR 8050T ︱total power requirement 48 kW︱weight of the machine ca. t︱

---

CNC Lathe - GURUTZPE - Type: AUTO M-S CNC - Year of construction: 2001 The machine can be inspected by appointment in the factory under power. TECHNICAL SPECIFICATIONS: * Distance between centers: 3.000 mm * Centre height: 370 mm * Turning diameter over bed: 700 mm * Turning diameter over cross slide: 500 mm * Turning length (between Forkardt F400 and center): 3.100 mm * Center / min. quill travel: 200 mm * Spindle bore (Opening main spindle): 105 mm * Turning speed main spindle at "0" rpm: 1.600 rpm * Main drive motor power headstock (S1): 30 kW * Total power requirement : 48 kW * Chip conveyor, drop height: 1.200 mm * Control: FAGOR 8050T Current situation tool turret: Forkardt manual chuck F400 an Multifix tool holder. Can be converted to Duplomatic 12-way stations (according to the attached photos). EQUIPMENT: * Documentation * CE label * Steady rest * Various accessories in addition Please note: The feed motor in Z is not okay (drilling over 50 mm and thread cutting is only possible to a limited extent). There is no guarantee for correctness and completeness of the technical details and accessories.

turning diameter 630 mm︱turning length 1.510 mm︱control Heidenhain CNC Pilot 4290 ︱greates pass round over bed 630 mm︱bar material dia. max. 65 mm︱c-axis ︱y-axis +/- 200 mm︱b-axis +/- 120 °︱turning speed range max. 5.000 U/min︱Torque max. 100 % ED: 280 Nm︱Torque max. 40 % ED: 380 Nm︱turning speeds C-Achse max.: 5.000 U/min︱Torque C-Achse: 280 Nm︱tool taper Capto C6 ︱spindle speed: - 12.000 U/min︱power capacity - milling spindle 100 % ED: 13.2 kW︱power capacity - milling spindle 40 % ED: 22 kW︱max. torque on the spindle 100 % ED: 60 Nm︱max. torque on the spindle 40 % ED: 100 Nm︱tool magazin: ︱

---

Turning/Milling center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating Purchase of additional / extended equipment: New purchase February 2015: - 2 pieces of SMW AUTOBLOK 3-jaw chuck/Power chucks Upgraded October 2015: - Marposs probe with software,- extraction system, - bigger coolant tank for band filter system, capacity: 1000 l. The machine can be inspected by appointment in the factory under power. Machine on (10/01/2020): 28.545 h Spindle hours (10/01/2020): 5.046 h Condition: Very good, ready for immediate use The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. High-efficiency turning operations are possible as well as complex 5-axis simultaneous machining. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% ED): 24 kW * Drive power (40% ED): 34 kW * Speed range from - up to: - 5.000 rpm * Torque (100% ED): 280 Nm * Max. torque (40% ED): 380 Nm * Speed of the C-axis: - 5.000 rpm * Torque of the C-axis (holding torque): 280 Nm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% ED): 13.2 kW * Drive power (40% ED): 22 kW * Torque (100% ED): 60 Nm * Torque (40% ED): 100 Nm * Partial step spindle axis: 0 degree * Holding torque, locked : 1.000 Nm Tool magazine: * Number of tools: 36 * Max. tool length: 400 mm * Max. tool diameter: 80 mm * Max. tool weight: 10 kg * Dimensions of the machine approx.(Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 t EQUIPMENT: * Chuck flushing device on the counter spindle, exterior * Differential pressure for main spindle * Main spindle as integrated spindle motor ISM 102 - Drive power: 35/45 kW (100/40% ED) - Torque: 600/700 Nm (100/40% ED) - Speed range: 20 - 4.000 rpm - Partial hollow clamping device (hydraulic) - Inner tube diameter: 104 x 848 mm deep - C-axis and spindle brake (hydraulic) * Tailstock function for the counter spindle - Mechatronic control of the supporting force in the program selectable - Supporting force: 250 - 600 daN, CTX beta/beta TC - Supporting force: 250 - 1.200 daN, CTX gamma TC * Counter spindle ISM 102, C-axis, instead of tailstock - Counter spindle as integrated spindle motor - Drive power: 35/45 kW - Part hollow clamping device, hydraulic (draft tube diameter: 104 mm) - C-axis and spindle brake (hydraulic) - Base slide (Z3), AC-servo drive with ball screw drive and parking brake, absolute position measuring system in the feed motor - Cooling system for engine console and spindle motor * Connection electric / mechanical for oil mist cutter * Tool holder Capto C6 (Sandvik), instead HSK-63A * Cooling through the spindle (coolant emulsion), tank capacity: 1.000 liter * Coolant spray gun * Separate speed limiting device for power chuck with indicated speeds, which are below the max. machine speed, per spindle required * Separate speed limitation for counter spindle * No steady rest available * Documentation komplete available. * Optionally available (Not included in the offer): - Capto tool holders, approx. 37 pieces - 1 x chuck SCHUNK ROTA THW plus 260-81,1 x chuck SCHUNK ROTA THW plus 215-62, With various hard and soft jaws. There is no guarantee for correctness and completeness of the technical details and and accessories.

turning diameter 520 mm︱turning length 3.000 mm︱control SINUMERIK 840D ︱total power requirement 162 kVA︱weight of the machine ca. 24 t︱dimensions of the machine ca. m︱

---

CNC Turning- and Milling Center - WFL - M40-G MILLTURN - YOM: 2004 The machine can be inspected by appointment under working condition. Condition: Very good / fully functional ! Used in 2-shift and 1-shift operation. Functionality: - Number spindles: 2 - Number compound slide: 2 - Number turrets: 2 - Spindle indexing: Yes - Driven tools: Yes - Number C-axis: 2 - Number Y-axis: 1 - Number B-axis: 1 TECHNICAL SPECIFICATIONS: - CNC control: SIEMENS SINUMERIK 840D Workspace - turning - - Swing diameter max.: 520 mm - Workpiece length max.: 3.000 mm Main spindle: - Speed range up to: 3.300 rpm - Number gear steps: 2 - Drive power S1 100%: 37 kW - Torque spindle S6 40%: 2.000 Nm - Torque spindle S1 100%: 1.400 Nm - Spindle diameter: 150 mm - Passage of spindle: 115 mm - C-axis: Yes Counter spindle: - Speed range up to: 4.000 rpm - Drive power S1 100%: 29 kW - Torque spindle S6 40%: 630 Nm - Torque spindle S1 100%: 551 Nm - C-axis: Yes Compound slide: - Travel Z-axis: 3.150 mm - Travel X-axis: 600 mm - Rapid traverse Z: 40.000 mm/min - Rapid traverse X: 30.000 mm/min - Tool holder: Turret Cross slide: - Travel X-axis: 230 mm - Rapid traverse X: 10.000 mm/min Tailstock: - Distance between centres max.: 3.000 mm Machine weight: approx. 24 tons (without coolant system) GENERAL DATA: Main spindle left: - Spindle head DIN 55026 Form A: Gr. 11 - Spindle diameter in the front bearing: 160 mm - Spindle diameter in the rear bearing: 150 mm - Spindle bore: 115 mm - Passage in the draft tube: depending on the clamping device Main drive left: - Drive power (100% ED): 37 kW - Gear stages automatically switchable: 2 - Torque max.- main spindle (gear stage 1 - 100% ED, 40% ED): 1.400/2.000 Nm - Torque max. main spindle (gear stage 2 - 100% ED, 40% ED): 350/500 Nm - Speed max. - main spindle (gear stage 1/2): 1.000/3.300 rpm - Breakpoint speed - main spindle (gear stage 1/2): 250/1.000 rpm C-axis left: - Speed range: 0 - 32 rpm - Max. torque on the main spindle: 1.300 Nm - Smallest programmable increment: 0,001° Counter headstock on the right: - Spindle head DIN 55026 Form A: Gr. 8 - Spindle diameter in the front bearing: 160 mm - Spindle diameter in the rear bearing: 110 mm - Spindle bore: 77 mm - Passage in the draft tube: depending on the clamping device - Drive power (100% ED): 20 kW - Torque max. - main spindle (100% ED, 40% ED): 551/630 Nm - Speed max. - main spindle - rotary operation: 4.000 rpm - Speed max. - main spindle - C-axis operation: 500 rpm - Breakpoint speed - main spindle: 500 rpm - Rapid feed - longitudinal: 14 m/min - Feed force - longitudinal (Z-axis): 800 daN - Setting force tail stock function max.: 800 daN - Measuring system Z-axis: indirect - rotative / absolute Turning-, drilling-, milling unit: - Drive power (100% ED): 15 kW - Speed max.: 9.000 rpm - Torque max. (100% ED): 125 Nm - Breakpoint speed: 1.125 rpm - Milling spindle diameter in the front bearing: 80 mm - Stroke Y-slide: 250 (-100/+150) mm - Feed force Y-axis: 1.200 daN - Rapid traverse Y-axis: 15 m/min - Measuring system Y: direct - linear/incremental - Diameter ball screw / slope Y-axis: 40 x 5 mm - Swing angle B-axis: 220° (-110°/+110°) - Indexing division B-axis: 2,5° - Swivel moment B-axis: 900 Nm - Holding torque B-axis indexed: 5.000 Nm - Rapid traverse swivel B-axis: 138 °/s - Min. increment: 0,001° - Internal coolant pressure max.: 80 bar - Tool system: DIN 69893, HSK-A63 - Pull-in force HSK-A63: 2.800 daN - Service interval / warning limit tool clamping: 250 000 / 200 000 - Permissible main cutting force turning: 1.200 daN - Temperature stabilization of the milling head: 25+/-1° EQUIPMENT: Tool magazine: - Magazine stations (space-coded): 100 - Tool system: HSK – A63, DIN 69893 - Max. tool diameter (adjacent tools): 90 mm - Max. tool diameter ( without adjacent tools): 160 mm - Tool length max. right hand / lane: 250 mm - Tool length max. left hand / lane: 500 mm - Tool weight max.: 15 kg - Forceps operation double gripper: spring force / forced actuation - Swivel speed double gripper: 180 °/s - Traverse speed changeover slide: 130 m/min - Magazine disc speed: 13 rpm Hydraulic system, manufacturer: REXROTH - Tank capacity: 90 l - Output: 34 l/min - System pressure max.: 75 bar Central lubrication system: Lubrication unit, MFE 5, manufacturer: Vogel - Tank capacity: 6 l - Output: 0,5 l/min - System pressure max.: 27 bar - Chip conveyor, manufacturer: DGS Band width: 450 mm, opening width: 405 mm Drop height: 1.250 mm Coolant Capacity: 500 l Coolant pump: 0,6 bar / 200 l/min - Paper belt filter, manufacturer: POLO Tank capacity (Clean water tank): 1.100 l - Oil pan - Documentation - CE marking The scope of delivery includes a comprehensive spare parts package, worth well above € 20,000.- (The spare parts set does not include a steady rest). The package includes the following items: - Telescopic cover right and left Z-axis - Ball screw X-axis - Ball screw Y-axis - Cover Y-axis ( multiple ) - Bearings and gears milling unit - Various gears - Various couplings - Brake unit - Various wipers ( almost all scrapers / wipers have already been replaced in the company ) - Other spare parts There is no guarantee for correctness and completeness of the technical details and accessories.

turning diameter over bed 1.200 mm︱turning diameter over slide rest 710 mm︱turning length 7.000 mm︱Control Sinumerik 840D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Heavy duty lathe with milling and grinding function / Brand: GIANA / Type: GFSC 12 CNC / Year of construction: 2007 The machine can be inspected by appointment under working condition. TECHNICAL SPECIFICATIONS: - Turning diameter over bed: 1.200 mm - Turning diameter over slide rest: 710 mm - Turning length: 7.000 mm - CNC Control: SIEMENS SINUMERIK 840D EQUIPMENT/ACCESSORIES: - Cooling lubricant system - Chip conveyor - Various accessories: Steady rests .... There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.

turning diameter 650 mm︱turning length 3.000 mm︱control HEIDENHAIN MANUALplus ︱total power requirement 33 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Lathe - cycle controled / Brand: KERN-DMT / Type: CD 650 Year of construction: 2010 The machine can be inspected by appointment under working condition. Very good, operational condition (regularly serviced). Spindle hours (02/02/2021): 5.738 h TECHNICAL SPECIFICATIONS: - Control: Heidenhain MANUALplus 620 Working area: - Swing diameter over bed: 650 mm - Swing diameter over cross slide: 420 mm - Sleigh path plan: 440 mm - Turning length: 3.000 mm Horizontal bed: - Prismatic flat track guide hardened and grinded Main spindle drive: - Digital AC motor - 40% ED: 33 kW Gearbox: - ZF planetary gearbox, 2 steps - electrically switched - mounted outside the headstock Spindle cabinet: - Spindle head: Size A8, DIN 55026 - Spindle diameter in the front bearing: 140 mm - Spindle bore: 106 mm - Speed range: 1 - 2.500 rpm Cross slide: - Feed range plan: 0,001 - 1.000 mm/U - Feed range longitudinal and thread pitches: 0,001 - 2.000 mm/U - Thread pitches: 0,01 - 999,9 mm - Rapid traverse plan/ longitudinal: 5/10 m/min - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock: - Pinole diameter: 100 mm - Pinole path: 200 mm - Acquisition cone: 5 Mk - Eccentric clamping and additional clamping screw - Manual spindle sleeve actuation and clamping - Tailstock roller guide Electrical equipment: - Three-phase current: 400 V, 50 Hz Extensive equipment, accessories. - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.

faceplate diameter 3.500 mm︱swing diameter 4.000 mm︱turning height 3.000 mm︱Control SINUMERIK 840D ︱total power requirement 250 kVA︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Vertical Turret Lathe - Double Column - SCHIESS SEDIN - VT - YOM: 2008 Operating hours: approx. 10.000 h The machine can be inspected by appointment under power in the factory. TECHNICAL SPECIFICATIONS: * CNC control: SIEMENS SINUMERIK 840D Main dimensions: * Turning diameter: 4.000 mm * Swing diameter: 4.000 mm * Processing -/workpiece height max.: 3.000 mm * Faceplate diameter: 3.500 mm * Dimensions of the base: 4.300 x 4.000 mm * Prism height of the support guide: 1.200 mm * Workpiece weight max.: 50 tons * Number of claw boxes: 4 pieces Crossbeam support: * Cross section of the chisel: 320 x 280 mm Travels: * Horizontal adjustment X-axis (total): 5.500 mm * Horizontal adjustment of the support from the center of the faceplate to the left: 2.300 mm * Horizontal adjustment of the support from the center of the faceplate to the right: 1.720 mm: 3.200 mm * Vertical adjustment of the chisel Z-axis: 2.200 mm * Crossbeam adjustment vertical stepless W-axis: 2.500 mm Speeds, feeds, adjustment speeds, cutting forces Faceplate drive: * Number of gear steps: 1 piece * Speed range of the gear step: 100 rpm Feed drive, crossbeam, cross slide, vertical and horizontal: * Feed rate: 0,1 - 5.000 mm/min Power, speeds, torques: faceplate drive: * Engine power: 250 kW * Motor speed: 100 rpm Pneumatics: * Pressure: 6 bar Connected Electricity: * Voltage: 380 V / 50 Hz * Total power requirement: 220 V * Electrical protection: 380 A Space requirement: * Length/Width/Height: 10.000 x 10.000 x 7.000 mm Equipment: * Automatic head changer: 6 stations * Chip conveyor * Complete enclosure * Documentation Please note: The machine is sold without a cooling lubricant system, as it is centrally installed ! There is no guarantee for correctness and completeness of the technical details and accessories.

faceplate diameter 5.000 mm︱swing diameter 6.300 mm︱turning height 3.500 mm︱total power requirement 145 kW︱weight of the machine ca. 183 t︱

---

Vertical Turret Lathe - Double Column - Brand: WMW-NILES - Type: DKZ 6300x3500 - Year of construction: 1986 The machine can be inspected by appointment in the factory. MAIN TECHNICAL DATA: * Control: conventionel * Faceplate diameter: 5.000 mm * Swing diameter: 6.300 mm (low workpieces: 6.500 mm) * Turning height: 3.500 mm * Table load max.: 50 t * 2 ram, travel: 1.800 mm * Connected load: 145 kW * Machine weight: approx. 183 t There is no guarantee for correctness and completeness of the technical details and and accessories.

faceplate diameter 4.770 mm︱swing diameter 10.000 mm︱turning height 4300 mm︱Control Siemens 840D ︱workpiece weight max. 100 t︱dimensions 15910 x 10600 x 9280 mm︱total power requirement kW︱weight of the machine ca. 121 t︱

---

Vertical Turret Lathe - Single Column (vertical boring- and milling machine) CKD-BLANSKO / SKJ 50-100 Year of construction: 1993 / commissioning: 1994 Retrofit in 2006: - CNC control Siemens 840D - Revision of the geometry - C-axis: Conversion to use with drilling and milling tools. - New dives - Completely new electrical (cabinet) etc. - New central lubrication - CAPTO tool holders / taper The machine can be inspected by appointment in dismantled / stored condition. It was used in2-shift operation. TECNICAL DESCRIPTION: - CNC control: Siemens Sinumerik 840D Machine: - Machining diameter: 10.000 mm - Processing height: 4.240 mm Support/RAM: - Motor power: 22 kW - Level II: max. 750 rpm - Torque: 1.000 Nm - RAM valve diameter: 250 mm - Dive diameter: 380 mm - RAM travel: 2.000 mm Rotary table: - Faceplate diameter: 4.700 mm - Workpiece weight max.: 100 t - Power: 100 kW Rotary operation: Speed: 40 rpm Level I max.: 11 rpm Level II max.: 40 rpm Torque: 273.000 Nm Milling operation: Speed: 10 (positioning axis) Travels: Crossbeam support Side support - X Travel: 3.375 mm 1.600 mm Feed: 4.600 mm/min 4.600 mm/min Feed force: 72.000 N 72.000 N - Z Travel: 2.000 mm 2.600 mm Feed: 4.600 mm/min 4.600 mm/min Feed force: 72.000 N 72.000 N +/- 30° +/- 15° RAM tilt - Crossbeam Travel: 3.350 mm Feed: 500 mm/min Machine dimensions: - Length: 15.910 mm - Width: 10.600 mm - Height over floor: 9.280 mm - Total height: 11.600 mm Machine weight: approx. 121 t - Chips handling: Circular conveyor Vertical unit: - Power: 22 kW - Torque: 1.000 Nm - Speed: 1.000 rpm Horizontal unit: - Power: 11 kW - Torque: 145 Nm - Speed: 2.000 rpm - Jaw boxes: 4 pieces Dokumentation complete available.

x-travel 1.000 mm︱y-travel 910 mm︱z-travel 835 mm︱Control Sinumerik 840 DE ︱total power requirement 60 kW︱weight of the machine ca. 16,1 t︱dimensions of the machine ca. 5,935 x 5,3 x 3,6 m︱

---

Machining Center - Horizontal - HECKERT - Type: CWK 630 - YOM: 2017 The machine can be inspected by appointment under working condition. Condition: Very good used, fully functional. Operating hours (December 21, 2020): - Operating hours total: 22.528 h - Total automatic operation: 6.952 h - Switch-on time: 10 h - Part program runtime: 0 h TECHNICAL SPECIFICATIONS - Control: Siemens Sinumerik 840DE powerline Travels: - X-axis (Table length adjustment): 1.000 mm - Y-axis (Support vertical adjustment): 910 mm - Z-axis (Table length adjustment): 835 mm - 2 pallets, clamping surface: 630 x 630 mm - NC-Rotary table - Automatic pallet change with rotatable clamping station - Working spindle: 6.000 rpm - Tool holder: HSK-A 100 - Tool chain magazine: 60 positions There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.

x-travel 1.850 mm︱y-travel 1.250 mm︱z-travel 1.525 mm︱Control SINUMERIK 840D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Machining Center - Horizontal - 5 axis Brand: STARRAG HECKERT / Type: CWK 1250 Classic / YOM: 2001 The machine can be inspected by appointment under working condition. Condition: fully functional / well used. Operating hours: 14.917 h / Automatic mode: 28.945 h (October 15, 2020) TECHNICAL SPECIFICATIONS: Control: SIEMENS SINUMERIK 840D Travels (Number of controlled axes: 5 - X/Y/Z/C/B): - X-axis: 1.850 mm - Y-axis: 1.250 mm - Z-axis: 1.525 mm - B-axis - NC-table: Measurement resolution 0,001° (degree) Speed: 8 rpm Partial table : 360 x 1° (degree) Pallets: - Number: 4 Size: à 1.000 x 1.250 mm with threaded holes by DIN 55201 Pallet change with a fixed clamping area - Workpiece diameter max.: 1.800 mm displacement circle Tool magazine: Tower magazine with 165 storage places in 3 towers - max. Tool diameter: 110 mm - max. Diameter (with free places neighboring): 250 mm - max. Tool length: 450 mm / 600 mm Working spindle: - Speed range: 20 - 6.000 rpm - Feed: Stepless 1 - 2.400 mm/min - Torque: 1.210 Nm (25% ED) - Main engine spindle: 28KW (100% ED), 50 kW (25% ED) - Tool holder: HSK 100 A EQUIPMENT: - Spindle extension by 100 mm towards the pallet - Pallet consecutive operation - Chip conveyor - Band filter - Coolant unit with temperature stabilization, container capacity: 900 l - Splash shower, 200 l/min - Measurement probe, Brand: Renishaw - Tool breakage monitoring - Tool changer: Tower magazine - Coolant trough the spindle, 30, 40, 50 bar switchable via M command - Documentation - CE compliant There is no guarantee for correctness and completeness of the technical details and accessories.

x-travel 1.700 mm︱y-travel 1.100 mm︱z-travel 1.450 mm︱Control SINUMERIK 840C ︱total power requirement 160 kW︱weight of the machine ca. 22,5 t︱dimensions of the machine ca. m︱

---

Machining Center - Horizontal/Vertical Brand: HECKERT / Type: CWK 1000 H/V / Year of construction: 1996 The machine can be inspected by appointment in the factory under power. Condition: Fully funcional. Operating hours (04/11/2020): 28.993 h TECHNICAL SPECIFICATIONS: Control: SIEMENS SINUMERIK 840C Number of controlled axes: 4 - X/Y/Z/C Travels: - X-axis: 1.700 mm - Y-axis: 1.100 mm - Z-axis: 1.450 mm - NC-table RGF 45, Brand: Rückle Indexing table: 360 x 1°(degree) Pallets: - Number: 2-fold, automatically Pallet size: à 1.000 x 800 mm Tool magazine (cartridge magazine): - 84 storage locations (72 of which can be used as working memory) 60 positionsworking memory 12 positions load memory 12 positions unloading memory - Workpiece weight: 2.500 kp - Max. Tool diamter: 1.650 (Collision circle) mm - Max. Workpiece height: 1.400 mm Working spindle: - Speed range: 20 - 4.200 rpm - Feed: Stepless 1 - 2.400 mm/min - Torque: 800/1000 (100/60% ED) Nm - Main engine Spindle: 27,5 kW - Tool holder: SK 50 EQUIPMENT: - 2-fold pallet changer, automatically - Chip conveyor - Belt filter - Coolant unit with temperature stabilization, tank capacity: 1.000 l - Measurement probe - Breakage monitoring - Tool magazine: Cartridge magazine - Coolant through the spindle 10, 30, 50 bar over M-command switchable - Temperature compensation in the H/V milling head - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

x-axis 6.000 mm︱y-axis 4.500 mm︱z-axis 1.500 mm︱c-axis +/- 200° 0︱Control Sinumerik 840D ︱total power requirement 120 kVA︱weight of the machine ca. 80 t︱dimensions of the machine ca. 14.75 x 12 x 6.2 m︱

---

Portal machining centre - Droop + Rein - TFS 30 50 D40 (C-axis - integrated milling unit) - Year of construction: 2009/Start-up: 2010 The machine can be inspected by appointment in operation. Very good, operational condition. Technical data: - CNC path control Siemens Sinumerik 840D Main dimensions: - Horizontal gantry passage (between the columns): 4.010 mm - Vertical gantry passage: 2.100 mm - Distance clamping table - spindle nose face milling head: min. 200 mm / max. 1.700 mm - Distance clamping table - spindle centre Angular milling head: min. 200 mm / max. 1.700 mm Travels: - X-axis (Longitudinal clamping table): 6.000 mm - Y-axis (Cross slide transverse): 4.500 mm * from the centre to the right: 2.250 mm * from the centre to the left: 2.250 mm - Z-axis(Vertical milling unit): 1.500 mm - C-axis (Rotate milling head): +/- 200° Clamping table: - Table surface: 3.000 x 5.000 mm - Height over floor: 500 mm - max. Load capacity (centric): 30 tons Equipment (among others): - 3 different milling heads, SK 50 - Milling head changer as pick-up system - Automatic tool changer as tool arena, 140-positions - Tool handling unit executed by 6-axis industrial robot (make: KUKA) with hydraulic double gripper - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.

spindle diameter 200 mm︱x-travel 12.000 mm︱y-travel 4.150 mm︱Control SINUMERIK 840D PW ︱total power requirement 100 kW︱weight of the machine ca. t︱

---

Ram-Type Floor Boring and Milling Machine Brand: SKODA - Type: W 200 HC - Year of construction:1990 / Overhaul in 2003 The machine can be inspected by appointment under working condition. Condition: Very good, fully functional. The machine runs trouble-free in operation, no repair backlog. TECHNICAL SPECIFICATIONS: - CNC Control: SINUMERIK 840D powerline Travels: - X-axis: 12.000 mm - Y-axis: 4.150 mm - Z-axis (Ram feed rate): 2.000 - W-axis (Spindle feed): 1.600 mm - Z- and W-axis together: 2.000 mm - Spindle diameter: 200 mm - Spindle holder: SK 60 Further information on technical equipment, accessories, photos, etc. available upon request. Without guarantee for completeness and correctness of the technical information and the equipment.

spindle diameter 135 mm︱x-travel 10.000 mm︱y-travel 4.200 mm︱z-axis 1.650 mm︱w-axis 3.000 mm︱B-axis (table) 2.500 x 3.000 mm︱U-axis 450 x 2.160 mm︱ram stroke 240 mm︱table load max. 60 t︱Control Heidenhain iTNC 530 ︱floor plate size: 6.000 x 5.000 mm︱total power requirement 132 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Ram-Type Floor Boring and Milling M/C, equipped with 6 controlled axes. Brand: SCHARMANN - Type: WF 135/240 - YOM: 1964, Retrofit: 2006. The machine can be inspected by appointment under power in Germany. Unfortunately, not in operation because a collet is defective/broken. TECHNICAL SPECIFICATIONS: * CNC control: HEIDENHAIN iTNC 530 Travels: * X-axis: 10.000 mm * Y-axis: 4.200 mm * Z-axis: 1.650 mm * Spindle diameter: 135 mm * RAM stroke: 240 mm * W-axis: 3.000 mm * Rotations: 1.000 rpm * NC-rotary table / B-axis: 2.500 x 3.000 mm * Table load max.: 60 tons * Cross slide / U-axis: 450 x 2.160 mm * Floor plates: 6.000 x 5.000 mm * Power: 132 kW * Documentation is partly available All information are without guarantee of completeness and correctness of the technical information and equipment.

spindle diameter 250 mm︱x-travel 12.000 mm︱y-travel 5.850 mm︱z-axis 2.000 mm︱w-axis 1.600 mm︱spindle taper SK60 ︱control SINUMERIK 840D powerline ︱total power requirement kW︱weight of the machine ca. ca. 130 t︱

---

Horizontal CNC boring- and milling machine - SKODA - Type: W 250 HB - Year of construction: 1994 / General overhaul in 2010 The machine can be inspected by appointment in operation. > First owner > Condition of the machine: Very good, fully functional > Use: 1.5 shift operation TECHNICAL DESCRIPTION: > Control: SIEMENS SINUMERIK 840D powerline > X-axis: 12.000 mm > Y-axis: 5.850 mm > Z-axis: 2.000 mm > W-axis: 1.600 mm > Spindle diameter: 250 mm, SK60 > Floor/clamping plates included: 13.000 x 4.000 x 400 mm > Documentation > CE compliant Further information on technical equipment, accessories, Photos etc. available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

x-travel 3.000 mm︱y-travel 1.700 mm︱z-travel 1.500 mm︱Control Heidenhain iTNC 530 ︱total power requirement 50 kW︱weight of the machine ca. 29 t︱dimensions of the machine ca. mm︱

---

Bed Type Milling Machine - Universal - ANAYAK - VH Plus-3000 - Year of construction: 2013 The machine can be inspected by appointment in the factory under power. Condition: Very good, fully functional. Operating hours: * Control ON: 20.410 h * Machine ON: 19.814 h * Program run: 9.045 h * Spindle run time: 9.926 h TECHNICAL SPECIFICATIONS: * CNC control: HEIDENHAIN iTNC 530 Travels: * X-axis: 3.000 mm * Y-axis: 1.700 mm * Z-axis: 1.500 mm There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.

x-travel 3.000 mm︱y-travel 1.700 mm︱z-travel 1.500 mm︱Control HEIDENHAIN iTNC 530 ︱total power requirement 50 kW︱weight of the machine ca. 29 t︱dimensions of the machine ca. m︱

---

Bed Type Milling Machine - Universal - ANAYAK - VH Plus-3000 - Year of construction: 2008 The machine can be inspected by appointment in the factory under power. Condition: Very good, fully functional. Operating hours: * Control ON: 41.425 h * Machine ON: 40.809 h * Program run: 20.336 h * Spindle run time: 23.821 h TECHNICAL SPECIFICATIONS: * CNC control: HEIDENHAIN iTNC 530 Travels: * X-axis: 3.000 mm * Y-axis: 1.700 mm * Z-axis: 1.500 mm There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.

x-travel 1.000 mm︱y-travel 750 mm︱z-travel 835 mm︱Control SINUMERIK 840D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Machining Center - Horizontal Brand: HECKERT / Type: CWK 630 / Year of construction: 2000 Commissioning: 03/09/2001 The machine can be inspected by appointment in the factory under power. Condition: Funcional. Operatinh hours (04.11.2020): 47.125 h TECHNICAL SPECIFICATIONS: Control: SIEMENS SINUMERIK 840D Number of controlled axes: 5 - X/Y/Z/C/B Travels: - X-axis: 1.000 mm - Y-axis: 750 mm - Z-axis: 835 mm - NC-Rotary table Speed: 18 rpm Measurement resolution: 0,001° (dregree) Partial table : 360 x 1° (degree) Pallet round storage with 4 storage spaces: - Pallet size: 1 x 630 x 800 mm, 3 x à 630 x 630 mm - 1 x Clamping point manually rotatable +/- 90° (degree) Tool magazine (Tower magazine): - 3 Towers - 165 Storage locations - Tool dimensions: max. length: 450/600 mm max. diameter: 110 mm Bridge-tool: 500 mm max. diameter with free adjacent pockets: 250 mm - Max. Tool diameter: 1.000 (Collision circle) mm Working spindle: - Speed range: 20 - 6.000 rpm - Feed: Stepless 1 - 2.400 mm/min - Torque: 1.210 Nm (25% ED) - Main engine spindle: 28 kW (100% ED), 50 kW (25% ED) - Tool holder: HSK 100 A EQUIPMENT: - Pallet round storage - Chip conveyor - Beld filter - Coolant unit with temperature stabilization, capacity: 900 l - Splash shower , 200 l/min - Measurement probe Renishaw - Breakage monitoring - Tool changer: Tower magazine - Coolant through the spindle 30, 40, 50 bar over M-command switchable - Temperature compensation - Emission extraction - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

x-travel 800 mm︱y-travel 800 mm︱z-travel 800 mm︱control SINUMERIK 840D powerline ︱total power requirement 88 kVA︱weight of the machine ca. 14,6 t︱dimensions of the machine ca. 12 x 5 x 3,3 m︱

---

Milling machining center - universal with 6-fold pallet pool Brand: DECKEL MAHO / Type: DMC 80 U duoBLOCK / Year of construction: 2006 Operating hours (20.10.2020): - Machine "ON": 58.191 h - Program run: 24.198 h - Spindle hours: 18.962 h Condtion: Very good (used), fully functional. Availability: Immediately. The machine can be inspected by appointment in the factory under power. TECHNICAL SPECIFICATIONS: Travels: X/Y/Z: 800 mm x 800 mm x 800 mm - Main drive: Integrated motor spindle - Milling spindle: Spindle speed: 20 - 12.000 rpm - Tool holder: SK 50 / HSK-A100 according to DIN 69872 - NC-Swivel milling head (horizontal/vertical) - Tool magazine (rack-type magazine vertical) with 300 magazine positions, Tool exchange door revolving wall 30, Magazine positions for set of armor - NC-Rotary table - Pallet round storage 6 pallets, d 800 mm x 630 mm with Zero point clamping system Schunk integrated in the pallet. Threaded holes M 16, according to DIN 55201-A2 Grid: 50 mm - Total power requirement : 88 kVA Weights: - Machine weight without tool magazine: approx. 14,6 t - Chip conveyor: approx. 0,6 tons - Band filter system: approx. 0,85 tons - Tool magazine with sluice: approx. 13,6 tons Space requirement Length/Width/Height: 12.000 x 5.000 x 3.300 mm EQUIPMENT: - CNC control: SINUMERIK 840D powerline XP - Coolant tank, capacity of 980 litres - Coolant through the spindle with 2 pressure stages 40/80 bar - Measurement probe Renishaw MP 10 - TDS Tool identification - Tool breakage control - Rinsing pistol - Oil and emulsion mist cutting system - Electronic handwheel - Operating mode 4 "Process monitoring in production" - Manual intervention with open doors - Operation of the clamping hydraulics (clamp/release) with open setup station door via hand switch - Chip conveyor - Rotating inspection glass - Documentation and electrical circuit diagram in German language - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

x-travel 3.000 mm︱y-travel 2.000 mm︱z-travel 960 mm︱Control Heidenhain iTNC 530 ︱b-axis +/- 360 °︱spindle taper HSK 63 ︱tool magazin: 60-fach/positions ︱table surface area 5.000 x 2.300 mm︱table load 23 t︱total power requirement 55 kVA︱weight of the machine ca. t︱dimensions of the machine ca. m︱Internal coolant ︱chip conveyor ︱Electronic handwheel ︱Part enclosure ︱Lubricant unit ︱

---

The EDEL machine CYPORT is a 5-axis machining center with integrated Direct- Drive fork head in gantry - portal design. This large machining center impresses with its unbeatable relationship between the installation area and the work area and is installed within a very short time due to its crane hook concept. For positioning in the X direction, the gantry portal, with synchronously driven ball screws on both sides, moves on the machine table. The main spindle moves in the Y and Z directions within the gantry portal. Operating hours (04/08/2020): - Machine hours: 83.805 h - Program run: 40.892 h - Spindle hours: 32.073 h (refers to 2 existing spindles, 1 spindle inserted in the machine, the other must be overhauled) TECHNICAL SPECIFICATIONS: The following technical data refer to a - steel material - with a strength of =/< 700 N/mm2 Workspace: - Travel range X-axis: 3.000 mm - Travel range Y-axis: 2.000 mm - Travel range Z-axis: 960 mm - Rapid traverse X/Y/Z: 20/20/15 m/min - Milling performance: - 600 cm³ - Feed forces each axis: 10.000 N - Drilling - HSS twist drill: Ø 32 mm - Threads: M 24 Portal passage: - Width Y: 2.280 mm - Height Z: 1.150 mm Control: HEIDENHAIN iTNC 530 Main spindle performance data: - Power S1: 21 kW - Torque S1: 100 Nm - Speed max.: 18.000 rpm - Characteristic speed: 2.000 rpm - Tool holder: HSK 63 Performance 2-axis fork head - type: CyMill M 21 - with C and A axes and an integrated main spindle is integrated in the gantry portal. - Power S1: 21 kW - Torque S1: 100 Nm - Speed max.: 18.000 rpm - Characteristic speed: 2.000 rpm - Tool holder: HSK-63 A-axis: - Swivel range: +/- 95° - Swing torque: 900 Nm - Holding torque clamped: 4.000 N C-axis: - Swivel range: +/- 200° - Swing torque: 900 Nm - Holding torque clamped: 4.000 N Tool changer: - Tool stations: 60 positions - Tool weight max.: 8 kg - Total tool weight in the magazine: 250 kg - Tool length max.: 300 mm - Tool diameter max.: 105 mm Installation data: - Space requirement: approx. 8.000 x 6.000 mm - Total weight: 23 tons - Total electrical load: ... kVA - Supply voltage: 400 V/50 Hz EQUIPMENT: - Internal cooling trough the spindle with additional air conditioning - Cooling lubricant unit, externally with fleece - Chip conveyor - Electronic handwheel - Documentation There is no guarantee for correctness and completeness of the technical details and accessories.

x-travel 8.000 mm︱y-travel 2.500/3.000 mm︱z-travel 1.500 mm︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Travelling column milling machine (Milling machine - Horizontal) Brand: FPT - Type: VERUS - Year of construction: 2011 / Start-up: 2012 The machine can be inspected by appointment under working condition. Operating hours (11/27/2020): - Spindle hours: 7.371 h Condition: Fully functional, ready to use. The machine will be sold with a milling head that has undergone an overhaul (implementation in early 2021). TECHNICAL SPECIFICATIONS: CNC Control: SIEMENS SINUMERIK 840D Travels: - X-axise (lengthways): 8.000 mm - Y-axis (vertical): 2.500 mm - Z-axis (cross): 1.500 mm Milling spindle: - Attachment spindle ø 132, Length: 660 mm lang, HSK 80 - Speed: 5.000 rpm - Spindle power: 34 kW - Spindle taper: ISO 50 EQUIPMENT: - Orthogonal milling head - Pick-up station, 2-fold - Internal cooling through the spindle - Tool changer: 40 positions - CE marking - Documentation Please note: The machine will be sold without floor plates, rotary table and coolant system. ADDITIONAL INFORMATION: Monolithic structure of the column, which integrates the sliding longitudinal saddle. This characteristic gives VERUS a lowered trimmed morphology. This morphology reduces the distance between longitudinal travel (X-axis of the column) and cross travel (Y-axis of the ram), thus decreasing the bending and overturning moment of the column due to the forces released during the machining and a drastic reduction of inertia. (cost saving). There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.

table length 6.500 mm︱table width 1.500 mm︱burner heads 1 ︱Control Sinumerik 840D ︱dimensions of the machine ca. 16 x 8,2 x 2,8 m︱total power requirement 70 kVA︱weight of the machine ca. 17 t︱

---

Laser-Tube cutting machine TRUMPF TruLaser Tube 5000 Year of construction: 2008 Setup-free and optimally accessible tube processing. Your entry into the world of laser tube processing has never been so easy: with the TruLaser Tube 5000, you can manufacture tubes openly and modularly down to the last detail. This is because the open machine concept and large window mean that all components and processes are always in view. Increase your productivity, as with the TruLaser Tube 5000 clamping system, tubes can be produced across the entire standard clamping range without the need for retooling. When going from one pipe dimension to another dimension, changes/adjustments to the machine are necessary. All parts required for this are supplied/sold with the machine. You can flexibly produce different orders with various outer circle diameters and lot sizes in succession. Machine is in very good condition and can be inspected by appointment in operation. The discharge has been changed by an engineering firm so that it is similar to the newer variants. Operating hours (18/02/2021): Laser-beam on: 10.553 h Laser on: 26.818 h Machine on: 29.345 h TECHNICAL SPECIFICATIONS: - Laser source: CO2-Laser source 2.7 kW - Number of burner heads: 1 Workpiece dimensions Length of the source material - with manual loading: > 141 mm (max. Processing length 6.500 mm) - with automatic loading: 3.000 - 6.500 mm max. Finished length: 2.000, 3.000, 4.500 mm (depending on the selected discharge station) min. Remaining tube length: 141 mm Cross-section - Round: Ø 20 mm - Ø 150 mm - Square: 20 x 20 mm - 120 x 120 mm - Rectangle: 20 x 20 mm - max. Enveloping circle-Ø 150 mm Workpiece weights max. Workpiece weight (Starting material machine base): 90 kg max. Workpiece weight (Finished part discharge station): 20 kg/m max. Bundle weight: 4.000 kg Speeds X-axis: 100 m/min Y-axis: 40 m/min Z-axis: 40 m/min A-axis: 720°/s Accuracy Position deviation: +/- 0.2 mm Average position spread: +/- 0.06 mm Drives: digital three-phase servo motors (maintenance-free) TRUMPF CNC-Control - Base: Siemens SINUMERIK 840D Colour screen: 10.4" Hard disk space: 500 MB for NC programs Floppy disk drive: 3.5"P Platform: PC with Windows Laser data TruFlow 2700: - Max. power: 2.700 W - Power input: 25 - 51 kW/h Guide values for materials, profiles and dimensions: Tube material, max. Thickness/Strength - Iron-Steel: 6 mm - Inox steel / Stainless steel: 4 mm Processing of the following file types: Dateityp Programming / Processing - IGES, DXF, DWG, GEO Programming on separate PC (not included in the scope of delivery) - GRA, DSTV Import with postprocessing - PDF, TIF, JPG Manual creation of the programme Machine weight: approx. 17 tons Space requirement: approx. 16.000 x 8.200 x 2.800 mm - Documentation - CE marking Technical data without guarantee - subject to prior sale. The operating hours on delivery of the machine may differ from the operating hours recorded in the offer.

length 6.060 mm︱width 2.540 mm︱number 2 Stück/pieces︱total wight à 63,5 t︱

---

2 pieces floor-/mounting-/foundation plates made of cast. The surfaces are plane-milled. The plates can be inspected by appointment in the factory. Specifications: Length: à 6.060 mm Width: à 2.540 mm Total weight approx.: à 63,5 t

weight max. 300 t︱clamping width 15.500 mm︱weight 23 t︱

---

1 piece crane / lifting beam/-traverse - Richter - Year of construction: 2009 Very good used condition. The inspection can take place at the factory by appointment. Description: - Load capacity: 300 tons - Range / distance of the attachment points: 15.500 mm - Net weight: 23 tons - Load double hook no.63 Construction drawings available