Réseau européen de revendeurs de machines de stockage
+49 (0) 2389 5299080
Questions

Catégorie:
    Fabricant:
      Machines:
        Commerçant:
             Vue: 

              Search: 


             Filtre:

          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          Hans Klein Werkzeugmaschinenhandel GmbH - Stockist for used machines

          Machinelist:

          Center Lathe

          used Center Lathe SARO SPA 10

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04270 · Center Lathe

          SARO - SPA 10 - - 1989 -

          Technical details
          turning diameter over bed 1020 mm︱turning diameter over slide rest 620 mm︱turning length 6000 mm︱centre height 510 mm︱turning dia. in gap 1250 mm︱spindle bore 105 mm︱turning speed range 8 - 1250 U/min︱feeds - longitudinal 0,056 - 10 mm/U︱feeds - cross 0,0186 - 3,33 mm/U︱thread dimensions 1 - 176 mm︱thread - inch 1/32 - 10 inch.︱thread - module 0,5 - 80 ︱face slide travel 500 mm︱ 250 mm︱tailstock quill diameter 100 mm︱tailstock quill stroke 300 mm︱tailstock taper MT 6 ︱max. workpiece weight between centres 2500 kg︱workpiece weight in steadies max. 3500 kg︱total power requirement 22,7 kW︱
          with gap with insert, with rapid feed in carriage acc.:faceplate 1000 mm dia., 4-pos. toolpost, 3 solid steadies, 1 running steady, running centre
            turning diameter over bed 1020 mm
            turning diameter over slide rest 620 mm
            turning length 6000 mm
            centre height 510 mm
            turning dia. in gap 1250 mm
            spindle bore 105 mm
            turning speed range 8 - 1250 U/min
            feeds - longitudinal 0,056 - 10 mm/U
            feeds - cross 0,0186 - 3,33 mm/U
            thread dimensions 1 - 176 mm
            thread - inch 1/32 - 10 inch.
            thread - module 0,5 - 80
            face slide travel 500 mm
            250 mm
            tailstock quill diameter 100 mm
            tailstock quill stroke 300 mm
            tailstock taper MT 6
            max. workpiece weight between ce. 2500 kg
            workpiece weight in steadies max. 3500 kg
            total power requirement 22,7 kW
            Description :
            with gap with insert, with rapid feed in carriage

            acc.:faceplate 1000 mm dia., 4-pos. toolpost, 3 solid steadies, 1 running steady, running centre
          Datasheet
          Request / Contact
          used Center Lathe LEFEBVRE & MARTIN LM 700

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04197 · Center Lathe

          LEFEBVRE & MARTIN - LM 700 - - 1988 -

          Technical details
          turning diameter over bed 700 mm︱turning diameter over slide rest 460 mm︱turning length 3000 mm︱centre height 355 mm︱spindle bore 50 mm︱total power requirement kW︱weight of the machine ca. 2,85 t︱
          Accessories: 3-jaw chuck 300 mmø, MULTIFIX-tool post, DRO on 2 axis FAGOR, coolant
            turning diameter over bed 700 mm
            turning diameter over slide rest 460 mm
            turning length 3000 mm
            centre height 355 mm
            spindle bore 50 mm
            weight of the machine ca. 2,85 t
            Description :
            Accessories: 3-jaw chuck 300 mmø, MULTIFIX-tool post, DRO on 2 axis FAGOR,
            coolant
          Datasheet
          Request / Contact
          used Center Lathe WOHLENBERG V 1000

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04200 · Center Lathe

          WOHLENBERG - V 1000 - - 1985 -

          Technical details
          turning diameter over bed 1000 mm︱turning diameter over slide rest 770 mm︱turning length 3000 mm︱centre height 500 mm︱face slide travel 480 mm︱upper slide travel 250 mm︱spindle bore 104 mm︱spindle head DIN 55022 Gr. 11 ︱spindle turning speed range 4,5 - 900 U/min︱feeds - longitudinal 0,063 - 140 mm/U︱feeds - cross 0,032 - 71 mm/U︱rapid travel - longitudinal/face 4,2 / 2,1 m/min︱thread - mm pitch 0,25 - 560 mm︱thread - module 0,0625 - 140 ︱thread - inch 112 - 1/20 Gg/"︱max. workpiece weight between centres 5000 kg︱max. workpiece weight -without tailstock 1800 kg︱tailstock quill diameter 140 mm︱tailstock quill stroke 315 mm︱steady for max. workpiece diameter from 465 mm︱
          with rapid feed in carriage, with feed in upper slide Accessories: faceplate 1000 mmø, 3-jaw chuck 400 mmø, 4-pos. tool holder, solid steady, running center
            turning diameter over bed 1000 mm
            turning diameter over slide rest 770 mm
            turning length 3000 mm
            centre height 500 mm
            face slide travel 480 mm
            upper slide travel 250 mm
            spindle bore 104 mm
            spindle head DIN 55022 Gr. 11
            spindle turning speed range 4,5 - 900 U/min
            feeds - longitudinal 0,063 - 140 mm/U
            feeds - cross 0,032 - 71 mm/U
            rapid travel - longitudinal/face 4,2 / 2,1 m/min
            thread - mm pitch 0,25 - 560 mm
            thread - module 0,0625 - 140
            thread - inch 112 - 1/20 Gg/"
            max. workpiece weight between ce. 5000 kg
            max. workpiece weight -without t. 1800 kg
            tailstock quill diameter 140 mm
            tailstock quill stroke 315 mm
            steady for max. workpiece diamet. 465 mm
            Description :
            with rapid feed in carriage, with feed in upper slide

            Accessories: faceplate 1000 mmø, 3-jaw chuck 400 mmø, 4-pos. tool holder,
            solid steady, running center

          Datasheet
          Request / Contact
          used Center Lathe TOS SU 50/2000

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04190 · Center Lathe

          TOS - SU 50/2000 - - 1960 -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 250 mm︱turning length 2000 mm︱centre height 250 mm︱centre distance 2000 mm︱spindle bore 56 mm︱spindle turning speed range 11,2 - 1400 U/min︱feeds - longitudinal 0,027 - 3,8 mm/U︱feeds - cross 0,013 - 1,9 mm/U︱thread - mm pitch 0,5 - 36 mm︱thread - inch 7/8 - 72 Gang/"︱thread - module 0,5 - 18 ︱tailstock quill diameter 90 mm︱tailstock quill stroke 220 mm︱tailstock taper MT 6 ︱dia. of leadscrew 50 mm︱lead of leadscrew 12 mm︱total power requirement 11,5 kW︱
          Accessories: 3-jaw chuck FORKARDT 200 mmø, MULTIFIX-toolpost, running center, coolant
            turning diameter over bed 500 mm
            turning diameter over slide rest 250 mm
            turning length 2000 mm
            centre height 250 mm
            centre distance 2000 mm
            spindle bore 56 mm
            spindle turning speed range 11,2 - 1400 U/min
            feeds - longitudinal 0,027 - 3,8 mm/U
            feeds - cross 0,013 - 1,9 mm/U
            thread - mm pitch 0,5 - 36 mm
            thread - inch 7/8 - 72 Gang/"
            thread - module 0,5 - 18
            tailstock quill diameter 90 mm
            tailstock quill stroke 220 mm
            tailstock taper MT 6
            dia. of leadscrew 50 mm
            lead of leadscrew 12 mm
            total power requirement 11,5 kW
            Description :
            Accessories: 3-jaw chuck FORKARDT 200 mmø, MULTIFIX-toolpost,
            running center, coolant
          Datasheet
          Request / Contact
          used Center Lathe WEISSER-HEILBRONN DLNE

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04189 · Center Lathe

          WEISSER-HEILBRONN - DLNE - - 1959 -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 310 mm︱turning length 1500 mm︱centre height 250 mm︱centre distance 1500 mm︱spindle bore 62 mm︱total power requirement kW︱weight of the machine ca. 2,3 t︱
          - with gap with insert - Accessories: 4-jaw chuck 300 mmø, 4-pos. toolpost, running steady
            turning diameter over bed 500 mm
            turning diameter over slide rest 310 mm
            turning length 1500 mm
            centre height 250 mm
            centre distance 1500 mm
            spindle bore 62 mm
            weight of the machine ca. 2,3 t
            Description :
            - with gap with insert -

            Accessories: 4-jaw chuck 300 mmø, 4-pos. toolpost, running steady
          Datasheet
          Request / Contact

          Chucking Automatic Lathe-Single Spindle

          used Chucking Automatic Lathe-Single Spindle BOLEY BDA-H

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03030 · Chucking Automatic Lathe-Single Spindle

          BOLEY - BDA-H - - 1981 -

          Technical details
          turning diameter ca. 100 mm︱turning length 100 mm︱number of slides 2 ︱spindle hollow 42 mm︱face slide travel 55 mm︱turning speed range max. 5000 U/min︱greates pass round over bed 240 mm︱feed speeds 20 - 400 mm/min︱rapid speed 6 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 1,1 t︱range L-W-H 2,80 x 1,20 x 2,00 m︱
          with connector field control
            turning diameter ca. 100 mm
            turning length 100 mm
            number of slides 2
            spindle hollow 42 mm
            face slide travel 55 mm
            turning speed range max. 5000 U/min
            greates pass round over bed 240 mm
            feed speeds 20 - 400 mm/min
            rapid speed 6 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 1,1 t
            range L-W-H 2,80 x 1,20 x 2,00 m
            Description :
            with connector field control
          Datasheet
          Request / Contact

          CNC Lathe

          used CNC Lathe MONFORTS DNC 3

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04012 · CNC Lathe

          MONFORTS - DNC 3 - - 1996 - SIEMENS 840 C

          Technical details
          swing diameter 530 mm︱turning diameter 150 mm︱spindle passage 65 mm︱control SIEMENS 840 C ︱travel x1 175 mm︱travel y1 +/- 70 mm︱travel z1 433 mm︱travel x2 175 mm︱travel y2 +/- 70 mm︱travel z2 433 mm︱spindle turning speed range 38 - 4000 U/min︱C-axis 2 x ︱tool turret 2 x 12 Pos.︱number of driven tool stations 2 x 12 ︱total power requirement 33 kW︱dimensions of machine L x W x H 3,95 x 2,49 x 2,6 m︱
          Accessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolant
            swing diameter 530 mm
            turning diameter 150 mm
            spindle passage 65 mm
            control SIEMENS 840 C
            travel x1 175 mm
            travel y1 +/- 70 mm
            travel z1 433 mm
            travel x2 175 mm
            travel y2 +/- 70 mm
            travel z2 433 mm
            spindle turning speed range 38 - 4000 U/min
            C-axis 2 x
            tool turret 2 x 12 Pos.
            number of driven tool stations 2 x 12
            total power requirement 33 kW
            dimensions of machine L x W x H 3,95 x 2,49 x 2,6 m
            Description :
            Accessories: collet fixtures on main spindle and sub spindle, one collet
            for main spindle and one for sub spindle, various tool holders
            (for driven tools as well), various spindle reductions,
            chip conveyor, coolant
          Datasheet
          Request / Contact
          used CNC Lathe BRINKMANN DCF 175

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04006 · CNC Lathe

          BRINKMANN - DCF 175 - - 1992 - SIEMENS SINUMERIK 820 T

          Technical details
          turning diameter 220 mm︱turning length 250 mm︱control SIEMENS SINUMERIK 820 T ︱swing diameter 380 mm︱chucking diameter 250 mm︱x-travel 200 mm︱z-travel 250 mm︱spindle turning speed range bis 4000 U/min︱rapid travel - longitudinal/face 15 m/min︱total power requirement 27,5 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 3,2 x 2,9 x 2,2 m︱
          acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant
            turning diameter 220 mm
            turning length 250 mm
            control SIEMENS SINUMERIK 820 T
            swing diameter 380 mm
            chucking diameter 250 mm
            x-travel 200 mm
            z-travel 250 mm
            spindle turning speed range bis 4000 U/min
            rapid travel - longitudinal/face 15 m/min
            total power requirement 27,5 kW
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 3,2 x 2,9 x 2,2 m
            Description :
            acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant


          Datasheet
          Request / Contact
          used CNC Lathe WEISSER-HEILBRONN JUNIORMAT

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04015 · CNC Lathe

          WEISSER-HEILBRONN - JUNIORMAT - - 1990 - SIEMENS SINUMERIK 810 T

          Technical details
          turning diameter 475 mm︱turning length 1000 mm︱control SIEMENS SINUMERIK 810 T ︱turning dia. over face-slide 260 mm︱centre height 235 mm︱spindle bore 63 mm︱turning speed range 10 - 2250 U/min︱feeds 0,001 - 50 mm/U︱rapid traverse X-axis 5 m/min︱rapid traverse Z-axis 8 m/min︱bed width 335 mm︱tailstock quill diameter 80 mm︱tailstock quill stroke 150 mm︱workpiece weight max. 750 kg︱face slide travel 300 mm︱tailstock taper MT 5 ︱weight of the machine ca. 3,0 t︱dimensions of machine L x W x H 3,2 x 2,0 x 1,8 m︱
          acc.: 3-jaw chuck 250 mm, faceplate 500 mm, steady, changing toolpost with various inserts, coolant
            turning diameter 475 mm
            turning length 1000 mm
            control SIEMENS SINUMERIK 810 T
            turning dia. over face-slide 260 mm
            centre height 235 mm
            spindle bore 63 mm
            turning speed range 10 - 2250 U/min
            feeds 0,001 - 50 mm/U
            rapid traverse X-axis 5 m/min
            rapid traverse Z-axis 8 m/min
            bed width 335 mm
            tailstock quill diameter 80 mm
            tailstock quill stroke 150 mm
            workpiece weight max. 750 kg
            face slide travel 300 mm
            tailstock taper MT 5
            weight of the machine ca. 3,0 t
            dimensions of machine L x W x H 3,2 x 2,0 x 1,8 m
            Description :
            acc.: 3-jaw chuck 250 mm, faceplate 500 mm, steady, changing toolpost with
            various inserts, coolant
          Datasheet
          Request / Contact

          CNC Lathe - Inclined Bed Type

          used CNC Lathe - Inclined Bed Type GILDEMEISTER TWIN 42

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04010 · CNC Lathe - Inclined Bed Type

          GILDEMEISTER - TWIN 42 - - 2003 - SINUMERIK 840 D

          Technical details
          turning diameter 120 mm︱turning length 650 mm︱control SIEMENS ︱control SINUMERIK 840 D ︱swing diameter 250 mm︱spindle distance 900 mm︱travel x1 300 mm︱travel z1 650 mm︱travel x2 180 mm︱travel z2 650 mm︱travel y1 +/- 40 mm︱travel sub spindle x3 175 mm︱travel sub spindle z3 670 mm︱main spindle bore 42 mm︱Main spindel power 25 kW︱main spindle speed 35 - 7000 U/min︱max. torque max. 200 Nm︱sub spindle bore 42 mm︱sub spindle - spindle speed range 35 - 7000 U/min︱sub spindle - spindle torque max. 200 Nm︱
          Accessories: collet fixture HAINBUCH on main spindle and sub spindle, various collets, div. Werkzeughalter (auch für angetriebene Werkzeuge), electron. hand wheel, chip conveyor, coolant with fleece band filter, loading and de-loading attachment (workpiece handling system) make PNEUMOTEC
            turning diameter 120 mm
            turning length 650 mm
            control SIEMENS
            control SINUMERIK 840 D
            swing diameter 250 mm
            spindle distance 900 mm
            travel x1 300 mm
            travel z1 650 mm
            travel x2 180 mm
            travel z2 650 mm
            travel y1 +/- 40 mm
            travel sub spindle x3 175 mm
            travel sub spindle z3 670 mm
            main spindle bore 42 mm
            Main spindel power 25 kW
            main spindle speed 35 - 7000 U/min
            max. torque max. 200 Nm
            sub spindle bore 42 mm
            sub spindle - spindle speed rang. 35 - 7000 U/min
            sub spindle - spindle torque max. 200 Nm
            Description :
            Accessories: collet fixture HAINBUCH on main spindle and sub spindle,
            various collets, div. Werkzeughalter (auch für angetriebene
            Werkzeuge), electron. hand wheel, chip conveyor,
            coolant with fleece band filter, loading and de-loading
            attachment (workpiece handling system) make PNEUMOTEC
          Datasheet
          Request / Contact
          used CNC Lathe - Inclined Bed Type HARDINGE CONQUEST T 42 SP

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04009 · CNC Lathe - Inclined Bed Type

          HARDINGE - CONQUEST T 42 SP - - 1997 - GE FANUC 18 T

          Technical details
          turning diameter max. 240 mm︱turning length 300 mm︱control GE FANUC 18 T ︱swing diameter max. over bed cover 269 mm︱pass through collet 42 mmø︱x-travel 134,9 mm︱z-travel 353 mm︱Distance main spindle - counter spindle max. 337 mm︱travel sub spindle 292 mm︱spindle taper ANSI A 2-5" ︱spindle turning speed range 50 - 5000 U/min︱spindle motor 7,5 kW︱rapid traverse X-axis 12 m/min︱rapid traverse Z-axis 16 m/min︱sub spindle - spindle head ANSI A 2-5" ︱sub spindle - spindle torque 60 - 6000 U/min︱sub spindle - spindle passage 42 mm︱sub spindle drive 3,7 kW︱workpiece weight max. 34 kg︱tool turret 12 Pos︱
          Accessories: collet fixture with various collets for main spindle and sub spindle, various tool holders, chip conveyor, coolant
            turning diameter max. 240 mm
            turning length 300 mm
            control GE FANUC 18 T
            swing diameter max. over bed cov. 269 mm
            pass through collet 42 mmø
            x-travel 134,9 mm
            z-travel 353 mm
            Distance main spindle - counter . max. 337 mm
            travel sub spindle 292 mm
            spindle taper ANSI A 2-5"
            spindle turning speed range 50 - 5000 U/min
            spindle motor 7,5 kW
            rapid traverse X-axis 12 m/min
            rapid traverse Z-axis 16 m/min
            sub spindle - spindle head ANSI A 2-5"
            sub spindle - spindle torque 60 - 6000 U/min
            sub spindle - spindle passage 42 mm
            sub spindle drive 3,7 kW
            workpiece weight max. 34 kg
            tool turret 12 Pos
            Description :
            Accessories: collet fixture with various collets for main spindle and
            sub spindle, various tool holders, chip conveyor, coolant
          Datasheet
          Request / Contact
          used CNC Lathe - Inclined Bed Type INDEX ABC

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04007 · CNC Lathe - Inclined Bed Type

          INDEX - ABC - - 1996 - INDEX, C 200-4

          Technical details
          spindle passage 65 mm︱turning length 280 mm︱control SIEMENS, SINUMERIK 840 C ︱control INDEX, C 200-4 ︱travel x1 90 mm︱travel z1 280 mm︱travel x2 81 mm︱travel z2 80 mm︱spindle turning speed range max. 6300 U/min︱rapid traverse Rev. 1 24/24 m/min︱rapid traverse Rev. 2 16/24 m/min︱feed power X/Z axis Rev. 1 5500/5500 Nm︱feed power X/Z axis Rev. 2 8300/5500 Nm︱total power requirement kW︱weight of the machine ca. 4 t︱dimensions of machine L x W x H 2,75 x 1,33 x 1,87 m︱
          - Revolver 1 for 7 tools + sub spindle - Revolver 2 with 6 tool places - 4 back drilling stations (1 of it driven) - C axis Accessories: bar loading magazine SCHMID, LM 3200; various tool holders, workpiece removal band, chip conveyor, coolant - partly overhauled in 2017 and sub spindle exchanged -
            spindle passage 65 mm
            turning length 280 mm
            control SIEMENS, SINUMERIK 840 C
            control INDEX, C 200-4
            travel x1 90 mm
            travel z1 280 mm
            travel x2 81 mm
            travel z2 80 mm
            spindle turning speed range max. 6300 U/min
            rapid traverse Rev. 1 24/24 m/min
            rapid traverse Rev. 2 16/24 m/min
            feed power X/Z axis Rev. 1 5500/5500 Nm
            feed power X/Z axis Rev. 2 8300/5500 Nm
            weight of the machine ca. 4 t
            dimensions of machine L x W x H 2,75 x 1,33 x 1,87 m
            Description :
            - Revolver 1 for 7 tools + sub spindle
            - Revolver 2 with 6 tool places
            - 4 back drilling stations (1 of it driven)
            - C axis

            Accessories: bar loading magazine SCHMID, LM 3200; various tool holders,
            workpiece removal band, chip conveyor, coolant

            - partly overhauled in 2017 and sub spindle exchanged -


          Datasheet
          Request / Contact
          used CNC Lathe - Inclined Bed Type GILDEMEISTER CTX 500

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04040 · CNC Lathe - Inclined Bed Type

          GILDEMEISTER - CTX 500 - - 1992 - HEIDENHAIN EPL 2

          Technical details
          turning diameter 400 mm︱turning length 1065 mm︱control HEIDENHAIN EPL 2 ︱swing diameter max. over bed cover 600 mm︱swing diameter over slide rest 420 mm︱x-travel 275 mm︱z-travel 1065 mm︱spindle bore 85 mm︱spindle turning speed range 16 - 3200 U/min︱max. torque on the spindle 800 Nm︱spindle drive 27 kW︱ 500 daN︱ 1000 daN︱rapid traverse X-axis 10 m/min︱rapid traverse Z-axis 15 m/min︱tool turret 12 Pos︱number of driven tool stations 6 ︱tool shaft (cylinder shaft DIN 69880) 40 mm︱spindle drive of rotating tools 9,2 kW︱C-axis ja / yes ︱
          Accessories: hydr. 3-jaw chuck SMW AUTOBLOK 260 mmø, various tool holders, chip conveyor, coolant
            turning diameter 400 mm
            turning length 1065 mm
            control HEIDENHAIN EPL 2
            swing diameter max. over bed cov. 600 mm
            swing diameter over slide rest 420 mm
            x-travel 275 mm
            z-travel 1065 mm
            spindle bore 85 mm
            spindle turning speed range 16 - 3200 U/min
            max. torque on the spindle 800 Nm
            spindle drive 27 kW
            500 daN
            1000 daN
            rapid traverse X-axis 10 m/min
            rapid traverse Z-axis 15 m/min
            tool turret 12 Pos
            number of driven tool stations 6
            tool shaft (cylinder shaft DIN 6. 40 mm
            spindle drive of rotating tools 9,2 kW
            C-axis ja / yes
            Description :
            Accessories: hydr. 3-jaw chuck SMW AUTOBLOK 260 mmø, various tool holders,
            chip conveyor, coolant
          Datasheet
          Request / Contact
          used CNC Lathe - Inclined Bed Type HEID SDSM-NCC

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04065 · CNC Lathe - Inclined Bed Type

          HEID - SDSM-NCC - - 1980 - BOSCH CNC System 5

          Technical details
          greates pass round over bed 750 mm︱swing diameter over bed slide 520 mm︱turning length 2660 mm︱movement of facing slide 460 mm︱spindle head DIN 55022 Gr. 11︱spindle bore 105 mm︱max. torque on the spindle max. 5000 Nm︱max. workpiece weight between centres 1200 kg︱turning speed range - stepless 11,2 - 1800 U/min︱spindle motor 52 kW︱tailstock quill diameter 125 mm︱tailstock quill stroke 150 mm︱tailstock taper MT 6 ︱control BOSCH CNC System 5 ︱floor space required (w/o switchgear cabinet) 7,90 x 2,10 x3,00 m︱weight of the machine ca. 14 t︱
          - with 15 pos. tool changer (chain magazin) acc.: hydr. 3-jaw chuck, hydr. steady, around 30 tool holders for chain magazin, chip conveyor, coolant
            greates pass round over bed 750 mm
            swing diameter over bed slide 520 mm
            turning length 2660 mm
            movement of facing slide 460 mm
            spindle head DIN 55022 Gr. 11
            spindle bore 105 mm
            max. torque on the spindle max. 5000 Nm
            max. workpiece weight between ce. 1200 kg
            turning speed range - stepless 11,2 - 1800 U/min
            spindle motor 52 kW
            tailstock quill diameter 125 mm
            tailstock quill stroke 150 mm
            tailstock taper MT 6
            control BOSCH CNC System 5
            floor space required (w/o switch. 7,90 x 2,10 x3,00 m
            weight of the machine ca. 14 t
            Description :
            - with 15 pos. tool changer (chain magazin)

            acc.: hydr. 3-jaw chuck, hydr. steady, around 30 tool holders for chain magazin, chip conveyor, coolant
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3 Y3

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04014 · CNC Turning- and Milling Center

          MORI SEIKI - NZ 2000 T3 Y3 - - 2008 - MORI SEIKI MSX-701 III

          Technical details
          turning diameter max. 320 mm︱turning length 810 mm︱control MORI SEIKI MSX-701 III ︱swing over bed 800 mm︱swing diameter over slide rest 800 mm︱standard turning diameter 200 mm︱Distance main spindle - counter spindle max. 1130 mm︱main spindle speed 5000 U/min︱main spindle bore 73 mm︱main spindle drive 25 kW︱sub spindle speed 5000 U/min︱sub spindle bore 73 mm︱sub spindle drive 25 kW︱bar material dia. max. 65 mm︱travel x1 210 mm︱travel y1 +65 / -45 mm︱travel z1 300 mm︱travel x2 210 mm︱travel y2 -65 / +45 mm︱travel z2 810 mm︱
          Accessories: hydr. 3-jaw chuck 200 mmø for main spindle, hydr. 3-jaw chuck 200 mmø for sub spindle, various tool holders (for rotary tools as well), chip conveyor, coolant, electron. hand wheel, 2 x tool measuring device, portal loader with magazin, workpiece removal band - machine has been partly overhauled in spring 2020 (ball bearing spindles, guideways, etc.) -
            turning diameter max. 320 mm
            turning length 810 mm
            control MORI SEIKI MSX-701 III
            swing over bed 800 mm
            swing diameter over slide rest 800 mm
            standard turning diameter 200 mm
            Distance main spindle - counter . max. 1130 mm
            main spindle speed 5000 U/min
            main spindle bore 73 mm
            main spindle drive 25 kW
            sub spindle speed 5000 U/min
            sub spindle bore 73 mm
            sub spindle drive 25 kW
            bar material dia. max. 65 mm
            travel x1 210 mm
            travel y1 +65 / -45 mm
            travel z1 300 mm
            travel x2 210 mm
            travel y2 -65 / +45 mm
            travel z2 810 mm
            Description :
            Accessories: hydr. 3-jaw chuck 200 mmø for main spindle,
            hydr. 3-jaw chuck 200 mmø for sub spindle,
            various tool holders (for rotary tools as well),
            chip conveyor, coolant,
            electron. hand wheel, 2 x tool measuring device,
            portal loader with magazin, workpiece removal band

            - machine has been partly overhauled in spring 2020
            (ball bearing spindles, guideways, etc.) -
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used Heavy Duty Lathe SCHNEIDER TP 80

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04000 · Heavy Duty Lathe

          SCHNEIDER - TP 80 - - GÜ 1991 - NUM 750

          Technical details
          turning diameter over bed 2200 mm︱turning diameter over slide rest 1800 mm︱turning length 5000 mm︱centre height 1100 mm︱faceplate diameter 2000 mm︱ 413/609,5 mm︱bed width 1800 mm︱diameter of quill 175 mm︱workpiece weight max. 25 t︱turning speed range 1,5 - 120 U/min︱control NUM 750 ︱total power requirement 38 kW︱weight of the machine ca. 40 t︱dimensions of the machine ca. 10,0 x 2,98 x 2,82 m︱
          acc.: 1 closed steady, 1 open steady, tool holder, boring bar holder - machine is working in 1/100 mm range -
            turning diameter over bed 2200 mm
            turning diameter over slide rest 1800 mm
            turning length 5000 mm
            centre height 1100 mm
            faceplate diameter 2000 mm
            413/609,5 mm
            bed width 1800 mm
            diameter of quill 175 mm
            workpiece weight max. 25 t
            turning speed range 1,5 - 120 U/min
            control NUM 750
            total power requirement 38 kW
            weight of the machine ca. 40 t
            dimensions of the machine ca. 10,0 x 2,98 x 2,82 m
            Description :
            acc.: 1 closed steady, 1 open steady, tool holder, boring bar holder

            - machine is working in 1/100 mm range -


          Datasheet
          Request / Contact
          used Heavy Duty Lathe HEYLIGENSTAEDT Da 560 x 7500

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04278 · Heavy Duty Lathe

          HEYLIGENSTAEDT - Da 560 x 7500 - - 1973 -

          Technical details
          turning diameter over bed 1100 mm︱turning diameter over slide rest 820 mm︱turning length 7500 mm︱workpiece length - max. 9000 mm︱centre height 560 mm︱spindle bore 100 mm︱workpiece weight max. 10.000 kg︱turning speed range 5 - 1000 U/min︱feeds - longitudinal 0,5 - 400 mm/min︱feeds - cross 0,5 - 400 mm/min︱creep feed 4 mm/min︱rapid travel - longitudinal/face 3,5 / 1,4 m/min︱tailstock quill diameter 200 mm︱tailstock quill adjustment motorisch 375 mm︱tailstock taper MT 6 ︱bed width 850 mm︱bed height over floor 650 mm︱total power requirement 48,5 kW︱weight of the machine ca. 20 t︱dimensions of machine 11,46 x 1,9 x 2,5 m︱
          - with rapid feed in carriage - Accessories: 4- jaw chuck 650 mm ø, 2 solid steadies, running centre
            turning diameter over bed 1100 mm
            turning diameter over slide rest 820 mm
            turning length 7500 mm
            workpiece length - max. 9000 mm
            centre height 560 mm
            spindle bore 100 mm
            workpiece weight max. 10.000 kg
            turning speed range 5 - 1000 U/min
            feeds - longitudinal 0,5 - 400 mm/min
            feeds - cross 0,5 - 400 mm/min
            creep feed 4 mm/min
            rapid travel - longitudinal/face 3,5 / 1,4 m/min
            tailstock quill diameter 200 mm
            tailstock quill adjustment motorisch 375 mm
            tailstock taper MT 6
            bed width 850 mm
            bed height over floor 650 mm
            total power requirement 48,5 kW
            weight of the machine ca. 20 t
            dimensions of machine 11,46 x 1,9 x 2,5 m
            Description :
            - with rapid feed in carriage -

            Accessories: 4- jaw chuck 650 mm ø, 2 solid steadies, running centre
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathe - cycle-controlled WEILER E 50/1

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04072 · Lathe - cycle-controlled

          WEILER - E 50/1 - - 2001 - WEILER D 1

          Technical details
          turning diameter 560 mm︱turning length 1100 mm︱control SIEMENS SINUMERIK 810 D ︱control WEILER D 1 ︱centre height 280 mm︱centre distance 1000 mm︱swing over bed 570 mm︱swing diameter over slide rest 340 mm︱spindle bore 83 mm︱spindle head DIN 55027 Gr. 8 ︱spindle turning speed range 4 - 2500 U/min︱max. torque on the spindle max. 1600 Nm︱feeds - longitudinal 0,001 - 20 mm/U︱feeds - cross 0,001 - 20 mm/U︱rapid travel - longitudinal/face 10 / 5 m/min︱workpiece weight max. 1600 kg︱tool turret 8 Pos︱tool taper VDI 40 ︱tailstock quill diameter 80 mm︱tailstock quill stroke 160 mm︱
          Accessories: hydr. 3-jaw chuck 315 mmø, coolant
            turning diameter 560 mm
            turning length 1100 mm
            control SIEMENS SINUMERIK 810 D
            control WEILER D 1
            centre height 280 mm
            centre distance 1000 mm
            swing over bed 570 mm
            swing diameter over slide rest 340 mm
            spindle bore 83 mm
            spindle head DIN 55027 Gr. 8
            spindle turning speed range 4 - 2500 U/min
            max. torque on the spindle max. 1600 Nm
            feeds - longitudinal 0,001 - 20 mm/U
            feeds - cross 0,001 - 20 mm/U
            rapid travel - longitudinal/face 10 / 5 m/min
            workpiece weight max. 1600 kg
            tool turret 8 Pos
            tool taper VDI 40
            tailstock quill diameter 80 mm
            tailstock quill stroke 160 mm
            Description :
            Accessories: hydr. 3-jaw chuck 315 mmø, coolant
          Datasheet
          Request / Contact
          used Lathe - cycle-controlled AJAX APOLLO 200

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04070 · Lathe - cycle-controlled

          AJAX - APOLLO 200 - - 2000 - CNC 8055/B-T

          Technical details
          turning diameter 400 mm︱turning length 1000 mm︱control FAGOR ︱control CNC 8055/B-T ︱centre height 200 mm︱centre distance 1000 mm︱turning dia. over face-slide 210 mm︱bed width 300 mm︱spindle bore 65 mm︱spindle turning speed range 0 - 3000 U/min︱transmission ratio 2 ︱feeds - longitudinal 0 - 10.000 mm/min︱feeds - cross 0 - 10.000 mm/min︱rapid travel - longitudinal/face 15 m/min︱tailstock quill diameter 68 mm︱tailstock quill stroke 155 mm︱tailstock taper MT 4 ︱total power requirement 8 kW︱weight of the machine ca. t︱dimensions 3,1 x 1,9 x 1,78 m︱
          Accessories: 3-jaw chuck, MULTIFIX-tool post with various inserts, coolant
            turning diameter 400 mm
            turning length 1000 mm
            control FAGOR
            control CNC 8055/B-T
            centre height 200 mm
            centre distance 1000 mm
            turning dia. over face-slide 210 mm
            bed width 300 mm
            spindle bore 65 mm
            spindle turning speed range 0 - 3000 U/min
            transmission ratio 2
            feeds - longitudinal 0 - 10.000 mm/min
            feeds - cross 0 - 10.000 mm/min
            rapid travel - longitudinal/face 15 m/min
            tailstock quill diameter 68 mm
            tailstock quill stroke 155 mm
            tailstock taper MT 4
            total power requirement 8 kW
            dimensions 3,1 x 1,9 x 1,78 m
            Description :
            Accessories: 3-jaw chuck, MULTIFIX-tool post with various inserts, coolant
          Datasheet
          Request / Contact
          used Lathe - cycle-controlled HARRISON ALPHA 550

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04075 · Lathe - cycle-controlled

          HARRISON - ALPHA 550 - - 1996 - GE FANUC ALPHA

          Technical details
          turning diameter 554 mm︱turning length 2000 mm︱control GE FANUC ALPHA ︱centre height 280 mm︱swing diameter over face slide 370 mm︱swing in the gap 830 mm︱spindle bore 90 mm︱spindle turning speed range 15 - 1800 U/min︱spindle nose D 1 - 8" Camlock ︱spindle drive 11 kW︱feeds - longitudinal 0,03 - 0,4 mm/U︱feeds - cross 0,015 - 0,2 mm/U︱rapid travel - longitudinal/face 3 / 1,5 m/min︱thread - mm pitch 14 mm︱bed width 400 mm︱radial face slide travel 310 mm︱tailstock quill diameter 95 mm︱tailstock quill stroke 145 mm︱tailstock taper MT 6 ︱tailstock adjustment out of the central pos. +/- 10 mm︱
          - with gap with insert - Acc.: 3-jaw chuck 315 mmø, MULTIFIX-toolpost with various inserts, 1 solid steady, coolant
            turning diameter 554 mm
            turning length 2000 mm
            control GE FANUC ALPHA
            centre height 280 mm
            swing diameter over face slide 370 mm
            swing in the gap 830 mm
            spindle bore 90 mm
            spindle turning speed range 15 - 1800 U/min
            spindle nose D 1 - 8" Camlock
            spindle drive 11 kW
            feeds - longitudinal 0,03 - 0,4 mm/U
            feeds - cross 0,015 - 0,2 mm/U
            rapid travel - longitudinal/face 3 / 1,5 m/min
            thread - mm pitch 14 mm
            bed width 400 mm
            radial face slide travel 310 mm
            tailstock quill diameter 95 mm
            tailstock quill stroke 145 mm
            tailstock taper MT 6
            tailstock adjustment out of the . +/- 10 mm
            Description :
            - with gap with insert -

            Acc.: 3-jaw chuck 315 mmø, MULTIFIX-toolpost with various inserts,
            1 solid steady, coolant
          Datasheet
          Request / Contact

          lathe-conventional-electronic

          used lathe-conventional-electronic BOEHRINGER-OERLIKON D 490

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04162 · lathe-conventional-electronic

          BOEHRINGER-OERLIKON - D 490 - - 1977 -

          Technical details
          centre height 240 ︱centre distance 1000 mm︱turning diameter over bed 490 mm︱turning diameter over slide 295 mm︱spindle bore 51 mm︱spindle turning speed range 31 - 2800 U/min︱spindle drive 15 kW︱feeds 0,05 - 20 mm/U︱face slide travel 245 mm︱upper slide travel 125 mm︱bed width 360 mm︱tailstock quill diameter 75 mm︱tailstock quill stroke 200 mm︱tailstock taper MT 5 ︱dimensions l/w/h 3,0 x 1,66 x 1,64 m︱
          - with rapid feed in carriage - Accessories: MULTIFIX-tool post with various inserts, solid steady, coolant
            centre height 240
            centre distance 1000 mm
            turning diameter over bed 490 mm
            turning diameter over slide 295 mm
            spindle bore 51 mm
            spindle turning speed range 31 - 2800 U/min
            spindle drive 15 kW
            feeds 0,05 - 20 mm/U
            face slide travel 245 mm
            upper slide travel 125 mm
            bed width 360 mm
            tailstock quill diameter 75 mm
            tailstock quill stroke 200 mm
            tailstock taper MT 5
            dimensions l/w/h 3,0 x 1,66 x 1,64 m
            Description :
            - with rapid feed in carriage -

            Accessories: MULTIFIX-tool post with various inserts,
            solid steady, coolant
          Datasheet
          Request / Contact

          Second-Operation Lathe

          used Second-Operation Lathe WEILER

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04290 · Second-Operation Lathe

          WEILER - - - -

          Technical details
          turning diameter over bed - mm︱turning diameter over slide rest - mm︱turning length 250 mm︱centre height 125 mm︱turning speeds 1800 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          with 6-hole turret acc.: various collets for turret
            turning diameter over bed - mm
            turning diameter over slide rest - mm
            turning length 250 mm
            centre height 125 mm
            turning speeds 1800 U/min
            Description :
            with 6-hole turret

            acc.: various collets for turret
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used Vertical Turret Lathe - Single Column HESSAPP DV 80

          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland
          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04095 · Vertical Turret Lathe - Single Column

          HESSAPP - DV 80 - - GÜ 1989 - SIEMENS SINUMERIK 810 T

          Technical details
          swing diameter 800 mm︱turning diameter 800 mm︱turning height 600 mm︱chucking diameter 500 mm︱travel X/Z-axis 600/700 mm︱spindle head DIN 55021 Größe 15 ︱spindle diameter in front bearing 200 mm︱turning speeds 44 ︱turning speed range 8 - 1120 U/min︱main drive 37 kW︱feed speeds max. 1500 mm/min︱rapid traverse 5500 mm/min︱Torque max. 800 kpm︱control SIEMENS SINUMERIK 810 T ︱total power requirement 50 kW︱weight of the machine ca. 13,5 t︱dimensions of machine L x W x H 2,80 x 2,50 x 3,72 m︱dimensions of hydaulic 0,70 x 1,35 x 1,50 m︱dimensions of switch cabinet 1,70 x 0,42 x 2,20 m︱dimensions of motor 1,15 x 1,00 x 1,70 m︱
          4-fold tool turret acc.: chip conveyor
            swing diameter 800 mm
            turning diameter 800 mm
            turning height 600 mm
            chucking diameter 500 mm
            travel X/Z-axis 600/700 mm
            spindle head DIN 55021 Größe 15
            spindle diameter in front bearin. 200 mm
            turning speeds 44
            turning speed range 8 - 1120 U/min
            main drive 37 kW
            feed speeds max. 1500 mm/min
            rapid traverse 5500 mm/min
            Torque max. 800 kpm
            control SIEMENS SINUMERIK 810 T
            total power requirement 50 kW
            weight of the machine ca. 13,5 t
            dimensions of machine L x W x H 2,80 x 2,50 x 3,72 m
            dimensions of hydaulic 0,70 x 1,35 x 1,50 m
            dimensions of switch cabinet 1,70 x 0,42 x 2,20 m
            dimensions of motor 1,15 x 1,00 x 1,70 m
            Description :
            4-fold tool turret
            acc.: chip conveyor


          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   
            •

            Profil de commerçant: Hans Klein Werkzeugmaschinenhandel GmbH

          Contacter le commerçant



            Hans Klein GmbH Werkzeugmaschinenhandel
           Dans le Muehlgut 2-4
            77815 Buhl
            Allemagne
            0049 (0) 7223 9617-0 "> 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
            info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de

          Profil de commerçant

          Historique

          1967
          La société «Hans Klein Dreherei - Vorrichtungsbau - Formenbau» est créée par Hans Klein dans la maison de ses parents, sur une surface de 70 m².
          1969
          Pose de la première pierre sur le nouvel emplacement de l'entreprise. Sur un terrain de 6.000 m², Hans Klein est en train de construire un atelier de fabrication comprenant un immeuble de bureaux, d’une superficie de 500 m².
          Site 6000 qm
          1972
          En plus de la production, il se lance dans le commerce de machines-outils d'occasion.
          1973
          Hans Klein accorde plus d'importance au commerce et achève la production.
          1977
          L'entreprise individuelle est transformée en société "GmbH"
          1979
          Pour développer sa capacité de stockage, Hans Klein construit un nouvel entrepôt. Sa surface est de 1.600 m², la capacité de la grue est de 20 tonnes.
          nouvel entrepôt
          1982
          Il est suivi d'un agrandissement de l'immeuble de bureaux.
          1997
          Afin de répondre à un besoin toujours croissant d'espace supplémentaire, Hans Klein loue un entrepôt externe à Ottersweier, situé à 10 km du site de l'entreprise. Si vous disposez de plus de m² 2.500, vous pouvez afficher d'autres machines. Une grue tonnes 35 est disponible.
          deuxième entrepôt
          2001
          Hans Klein achète un pot de 3500 m² sur le site de l'entreprise. Un nouvel entrepôt d'une surface de 1700 m² est construit et une grue d'une capacité de tonnes 50 est installée. La salle louée est effacée.
          site acheté

          Contact

          Hans Klein Machine Tool Trade GmbH
          Dans le Muehlgut 2-4
          D-77815 Buhl-Weitenung
          Tél.: + 49 (0) 7223 - 96 17-0
          Fax.: + 49 (0) 7223 - 5 85 12
          Courriel: info@klein-werkzeugmaschinen.de
          Page d'accueil: www.klein-werkzeugmaschinen.de



          Hans Klein Werkzeugmaschinenhandel GmbH 77815 Bühl Im Mühlgut 2-4 Deutschland
          Hans Klein Werkzeugmaschinenhandel GmbH

          Im Mühlgut 2-4



          Contact Trader


            Hans Klein Werkzeugmaschinenhandel GmbH
           Im Mühlgut 2-4
            77815 Bühl
            Deutschland
            0049 (0) 7223 9617-0
            0049 (0) 7223 58512
            info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
            Contact person:
           

          Trader Profile



          Machine category


          · Abkantpresse - hydraulisch · Abläng- und Zentriermaschine · Absaugung · Abwickelhaspel · Aufspannplatte · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bettfräsmaschine - Vertikal · Bohrkopf · Bügelsägeautomat · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Doppelständer - Ziehpresse - Mechanisch · Doppelständerpresse - Hydraulisch · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Drehmaschine-konventionell-elektronisch · Exzenterpresse - Doppelständer · Flachschleifmaschine - Horizontal · Flexibles Fertigungssystem · Formmeßmaschine · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Futterautomat - Einspindel · Gewindefräsmaschine · Kaltkreissäge · Karusselldrehmaschine - Einständer · Koordinatenbohrmaschine · Kreissäge · Leit- und Zugspindeldrehmaschine · Nachdrehbank · Profiliermaschinen Dach & Wand · Profilstahlschere - Kombiniert · Radialbohrmaschine · Richtmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtaktmaschine · Schnellradialbohrmaschine · Schraubenkompressor · Schraubstock · Schrägeinstechschleifmaschine · Schweißanlage · Schweißdrehtisch · Schwerdrehmaschine · Spannfutter · Späneförderer · Stangenzuführung · Stanz- und Nibbelmaschine · Stähleschleifmaschine · Sägeblattschärfmaschine · Säulenbohrmaschine · Tafelschere - mechanisch · Tischbohrmaschine · Tischbohrwerk · Wendespanner · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine (Rundtisch) · Werkzeugfräsmaschine - Universal ·
          Compendium
          Logiciels
          Contenu des machines d'occasion
          Confidentialité
          SUIVEZ NOUS
          © 2000-2021, Logotech oHG · Logiciels et services Internet - Tous droits réservés