,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Franz Teutenberg GmbH & Co KG - Stockist for used machines

          Machinelist:


          Tube Drawing Machine

          used  Tube Drawing Machine Haginger 250/3


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403524R · Tube Drawing Machine

          Haginger - 250/3 - - 1981/2006 -

          Technical details
          pulling force - max. 25 t︱diameter 12 - 80 mm︱drawing length 13000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Triple drawing chain bench for tubes and bars with Pre-banch Make: Haginger Type: 250/3 Year: 1981/2006 Traction: 25 tons. Suitable for. Single, double,triple draw Working range: Ø 12-80 mm tubes 12-50 mm bars Drawing speed: continuously 2 to 60 m / min Rewind speed. Max. 120 m / min pre-tube 12.5 meter Drawing length: max.15 meter Electric: Siemens S7 Main motor: 200 kW Operating voltage: 400 V, 50 Hz Control voltage: 24 V There are 4 saws integrated in this line. a matching tube pointer (for tag ends on thin-wall tubestubes) can be supplied The equipment is in excellent condition.
            pulling force - max. 25 t
            diameter 12 - 80 mm
            drawing length 13000 mm
            Description :
            Triple drawing chain bench for tubes and bars
            with Pre-banch

            Make: Haginger
            Type: 250/3
            Year: 1981/2006

            Traction: 25 tons.
            Suitable for. Single, double,triple draw
            Working range: Ø 12-80 mm tubes
            12-50 mm bars
            Drawing speed: continuously 2 to 60 m / min
            Rewind speed. Max. 120 m / min

            pre-tube 12.5 meter
            Drawing length: max.15 meter

            Electric: Siemens S7

            Main motor: 200 kW
            Operating voltage: 400 V, 50 Hz
            Control voltage: 24 V

            There are 4 saws integrated in this line.

            a matching tube pointer
            (for tag ends on thin-wall tubestubes) can be supplied


            The equipment is in excellent condition.
          Datasheet
          Request / Contact

          Pointing machine

          used  Pointing machine KROLLMANN FM-H-4


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403783 · Pointing machine

          KROLLMANN - FM-H-4 - - 2000 -

          Technical details
          diameter 80 - 25 mm︱workpiece length max. 350 mm︱quality hydraulische Spannv. 0︱working area 100 - 25 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱material length max. ca 350 mm︱lip angle °︱
          POINTING - MILLING MACHINE FOR BARS Fabr.: Krollmann Type: FM H4 year: 2000 Pointing Milling machine with 4 pieces hard-metal turn-over plates working range: round + profile + square: 80 (100) to 25 mm Ø Milling drive: 380 / 420 V. 18,5 kW, 50 Hz, 1465 rpm Machine consists of: - pointing milling machine with oil mist exhauster with hydraulical clamping and pusher device - hydraulic control unit - cooling medium tank with chip box - command desk - electrical cabinet with air condition, SIEMENS S 7-300 control
            diameter 80 - 25 mm
            workpiece length max. 350 mm
            quality hydraulische Spannv. 0
            working area 100 - 25 mm
            material length max. ca 350 mm
            Description :
            POINTING - MILLING MACHINE FOR BARS
            Fabr.: Krollmann
            Type: FM H4
            year: 2000

            Pointing Milling machine with 4 pieces hard-metal turn-over plates
            working range: round + profile + square:
            80 (100) to 25 mm Ø

            Milling drive: 380 / 420 V. 18,5 kW, 50 Hz, 1465 rpm


            Machine consists of:
            - pointing milling machine with oil mist exhauster
            with hydraulical clamping and pusher device
            - hydraulic control unit
            - cooling medium tank with chip box
            - command desk
            - electrical cabinet with air condition, SIEMENS S 7-300 control
          Datasheet
          Request / Contact

          Wire Drawing Machine

          used  Wire Drawing Machine HERBORN HG 10


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-103523 · Wire Drawing Machine

          HERBORN - HG 10 - - 1971 -

          Technical details
          wire dia. bis 26 mm︱pulling capacity 10 t︱total power requirement 96 kW︱weight of the machine ca. 12 t︱
          Vertical Wire Drawing Machine Drawing Machine Construction: Herborn Type: HG 10 Year: 1971 (renovated in 2006) Working range: max. 16 mm Ø working with steel max. 26 mm Ø working with copper (produced last round and square) drawing force: 10 tons drum diabmeter: 700 mm drawing speed: max. 100 m/min frequency controlled Main motor: 380-420V, 50Hz, 75kW complete electrics 2006 with Siemens S7 control
            wire dia. bis 26 mm
            pulling capacity 10 t
            total power requirement 96 kW
            weight of the machine ca. 12 t
            Description :
            Vertical Wire Drawing Machine

            Drawing Machine
            Construction: Herborn
            Type: HG 10
            Year: 1971 (renovated in 2006)

            Working range: max. 16 mm Ø working with steel
            max. 26 mm Ø working with copper
            (produced last round and square)
            drawing force: 10 tons
            drum diabmeter: 700 mm
            drawing speed: max. 100 m/min frequency controlled
            Main motor: 380-420V, 50Hz, 75kW


            complete electrics 2006 with
            Siemens S7 control







          Datasheet
          Request / Contact

          Folding tag pointer

          used  Folding tag pointer KROLLMANN HRA 30/20-3


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-103419 · Folding tag pointer

          KROLLMANN - HRA 30/20-3 - - 1981 -

          Technical details
          tube diameter max. 30 mm︱workpiece length 250 mm︱number of tools 4
          Hydraulic tube-pointing press with notching device Constr. Krollmann Type. HRA 30 / 20-3 Year. 1981 The pointing press is for the production of drawing-out devices of tubes Max. Outside Ø of the tube 30 mm Pressure force. 00 kN at 250 bar Tool length. 250 mm Hydraulic drive. 5.5kW, 1500 rev / min Operating voltage. 500V AC, 50Hz Total weight of the system. about 1.6 tons.
            tube diameter max. 30 mm
            workpiece length 250 mm
            number of tools 4
            Description :
            Hydraulic tube-pointing press
            with notching device

            Constr. Krollmann
            Type. HRA 30 / 20-3
            Year. 1981

            The pointing press is for the production of drawing-out devices of tubes

            Max. Outside Ø of the tube 30 mm

            Pressure force. 00 kN at 250 bar

            Tool length. 250 mm

            Hydraulic drive. 5.5kW, 1500 rev / min

            Operating voltage. 500V AC, 50Hz

            Total weight of the system. about 1.6 tons.
          Datasheet
          Request / Contact
          used  Folding tag pointer KROLLMANN HRA 30/20-3


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-103418 · Folding tag pointer

          KROLLMANN - HRA 30/20-3 - - 1981 -

          Technical details
          tube diameter max. 30 mm︱workpiece length 250 mm︱number of tools 4 pcs.︱
          Hydraulic tube-pointing press with notching device Fabr. Krollmann Type. HRA 30 / 20-3 Year. 1981 The pointing press is for the production of drawing-out devices of tubes Max. Outside Ø of the tube 30 mm Pressure force. 00 kN at 250 bar Tool length. 250 mm Hydraulic drive. 5.5kW, 1500 rev / min Operating voltage. 500V AC, 50Hz Total weight of the system. about 1.6 tons.
            tube diameter max. 30 mm
            workpiece length 250 mm
            number of tools 4 pcs.
            Description :
            Hydraulic tube-pointing press
            with notching device

            Fabr. Krollmann
            Type. HRA 30 / 20-3
            Year. 1981

            The pointing press is for the production of drawing-out devices of tubes

            Max. Outside Ø of the tube 30 mm

            Pressure force. 00 kN at 250 bar

            Tool length. 250 mm

            Hydraulic drive. 5.5kW, 1500 rev / min

            Operating voltage. 500V AC, 50Hz

            Total weight of the system. about 1.6 tons.
          Datasheet
          Request / Contact

          Draw bench

          used  Draw bench Haginger 250/3


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403524 · Draw bench

          Haginger - 250/3 - - 1981/2006 -

          Technical details
          pulling capacity 25 t︱drawing length 13 000 mm︱working range 12 - 80 mm︱
          Triple drawing chain bench for tubes and bars with Pre-banch Make: Haginger Type: 250/3 Year: 1981/2006 Traction: 25 tons. Suitable for. Single, double,triple draw Working range: Ø 12-80 mm tubes 12-50 mm bars Drawing speed: continuously 2 to 60 m / min Rewind speed. Max. 120 m / min Pre-tube 12.5 meter Drawing length: max. 15 meter Electric: Siemens S7 Main motor: 200 kW Operating voltage: 400 V, 50 Hz Control voltage: 24 V There are 4 saws integrated in this line. a matching tube pointer (for tag ends on thin-wall tubestubes) can be supplied The equipment is in excellent condition.
            pulling capacity 25 t
            drawing length 13 000 mm
            working range 12 - 80 mm
            Description :
            Triple drawing chain bench for tubes and bars
            with Pre-banch

            Make: Haginger
            Type: 250/3
            Year: 1981/2006

            Traction: 25 tons.
            Suitable for. Single, double,triple draw
            Working range: Ø 12-80 mm tubes
            12-50 mm bars
            Drawing speed: continuously 2 to 60 m / min
            Rewind speed. Max. 120 m / min


            Pre-tube 12.5 meter
            Drawing length: max. 15 meter



            Electric: Siemens S7

            Main motor: 200 kW
            Operating voltage: 400 V, 50 Hz
            Control voltage: 24 V

            There are 4 saws integrated in this line.

            a matching tube pointer
            (for tag ends on thin-wall tubestubes) can be supplied

            The equipment is in excellent condition.
          Datasheet
          Request / Contact

          Pointer

          used  Pointer KROLLMANN Flachanwalzen


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-403780 · Pointer

          KROLLMANN - Flachanwalzen - - ca. 1978 -

          Technical details
          Flachanwalzen ︱working area Materialstärke bis 24 mm︱working length 300 - 600 mm︱drive motor kW︱
          Pointing roller for flat material Fabr. Krollmann max.material thickness 24 mm Usable width 3 times 170 mm with two scissors Main drive 400V, 11 kW, 50 Hz
            Flachanwalzen
            working area Materialstärke bis 24 mm
            working length 300 - 600 mm
            Description :
            Pointing roller for flat material

            Fabr. Krollmann

            max.material thickness 24 mm
            Usable width 3 times 170 mm

            with two scissors
            Main drive 400V, 11 kW, 50 Hz
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil de commerçant: Franz Teutenberg GmbH & Co KG

          Contacter le commerçant



            Franz Teutenberg GmbH & Co KG
           Sur le canal nord-34 36
            47877 - Williche
            Deutschland
            02154 95790 "> 02154 95790
            02154 9579 29
            info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com

          Profil de commerçant

          Franz Teutenberg-Maschinen GmbH & Co KG

          Notre société Franz Teutenberg GmbH & Co KG a été fondée en 1966 et est depuis spécialisée dans le commerce de machines d'occasion et d'installations pour laminoirs, semi-finisseurs et étiroirs travaillant sur des fils, barres, tôles et plaques, bandes et tubes.

          Nous stockons plus de machines spéciales 100 sur une surface de plancher d’environ 3.000 m².

          Nous pouvons vous proposer des machines neuves ou peu utilisées qui ont été vendues par leurs propriétaires précédents en raison de mesures de réorganisation ou par des successions de faillis. Nous stockons également des machines et des installations de production spéciales plus anciennes, qui peuvent encore durer de nombreuses années, vous permettant ainsi de réaliser des économies considérables. 

          De plus, nous proposons également la médiation:
          - de nouvelles machines
          - de révision de machines
          - de réparation ou de modernisation de machines.

          NOTRE PROGRAMME DE LIVRAISON
          Notre domaine principal sont les machines utilisées telles que: 

          Machine à dresser les barres 10-Roll Machine à dresser les barres 2-Roll Machine à dresser les barres XRUMX-Roll Machine à dresser les tubes 3 Machine à dresser les barres 6-Roll Machine à dresser les tubes 7-Roll Machines auxiliaires pour les travaux de dessin Machines auxiliaires pour les travaux de dessin Machines auxiliaires pour les travaux de dessin Machine à éplucher les barres Machines à cisailler les stocks Broyeuse à bande Détartreuse à brosse Machine à souder bout à bout Machine à rectifier et polir sans centre Machine à chanfreiner Machine à chanfreiner Chariot de levage pour bobines Scie circulaire à froid Scie circulaire à froid Système de convoyage Decoiler Détartrant Banc de tirage Banc de tirage Machine de tréfilage fine Pointeur de marque pliable Presse de forge à marteau - Rectifieuse hydraulique - Machine à tréfiler multiple sans centre Marteau à pointer Machine à pointer Redresseur de profil Anneau Machine de pré-pliage et de pointage Ripo (strai machine de formage et de polissage Lignes de formage de rouleaux Niveleur de rouleaux Machine à tailler les lames de scie Machine à travailler les tôles Machine à dresser les tôles Ligne de soufflage Ligne simple bloc Machine à souder par points Machine à dresser par points - Barre Presse à dresser - Coupe et fraisage de tubes horizontaux Machine à couper les tubes Machine à dresser les tubes. Ligne de soudage de tubes. Machine à souder les treillis métalliques. Machine à souder les treillis métalliques. Laminoir pour fil. Machine à dresser et à couper les fils. Machine à dresser les fils.

          Adresse

          Franz Teutenberg GmbH & Co KG
          Sur le canal nord-34 36
          D-47877 Willich
          (Aéroport de Düsseldorf)

          Comment nous trouver

          Vous pouvez nous rejoindre via l’A 52 en direction de Düsseldorf comme suit: Sortie Willich Schiefbahn, à gauche. Jusqu'au prochain feu, à droite. Suivez la route principale, 2. Route à gauche (= Am Nordkanal).
          Vous pouvez nous rejoindre via l’A 52 en direction de Mönchengladbach comme suit: Sortie Willich Schiefbahn, à droite. Jusqu'au prochain feu, à droite. Suivez la route principale, 2. Route à gauche (= Am Nordkanal).




          Franz Teutenberg GmbH  &  Co KG   47877 - Willich Am Nordkanal 34-36 Deutschland
          Franz Teutenberg GmbH & Co KG

          Am Nordkanal 34-36



          Contact Trader


            Franz Teutenberg GmbH & Co KG
           Am Nordkanal 34-36
            47877 - Willich
            Deutschland
            02154 95790
            02154 9579 29
            info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
            Contact person:

           




          Machine category


          Anspitzmaschine · Anspitzwalze · Drahtziehmaschine · Faltangelpressen · Rohrziehmaschine · Ziehbänke ·