,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          FLECKENSTEIN Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Drilling and Milling M/C

          used  Drilling and Milling M/C Castel GREEN 1T4


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1622 · Drilling and Milling M/C

          Castel - GREEN 1T4 - - 1997 -

          Technical details
          bore capacity in steel (diameter) 110 mm︱x-travel 2.100 mm︱y-travel 1.500 mm︱z-travel 1.000 mm︱w-travel 500 ︱control HEIDENHAIN TNC 430 ︱connected load kVA︱Working Spindle - ︱boring quill diameter 110 mm︱spindle taper DIN 69871 ISO 50 ︱spindle power 22 kW︱transmission ratio 2 ︱turning speed range 2.000 U/min︱clamping table - ︱max. workpiece weight 4.000 kg︱surface area 1.100 x 1.300 mm︱feeds ︱feed range X-, Y-, Z- axis 0 – 10.000 mm/min︱feed range W-axis 0 - 10.000 mm/min︱rapid motion - x-axis 10.000 mm/min︱
          Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump
            bore capacity in steel (diameter. 110 mm
            x-travel 2.100 mm
            y-travel 1.500 mm
            z-travel 1.000 mm
            w-travel 500
            control HEIDENHAIN TNC 430
            Working Spindle -
            boring quill diameter 110 mm
            spindle taper DIN 69871 ISO 50
            spindle power 22 kW
            transmission ratio 2
            turning speed range 2.000 U/min
            clamping table -
            max. workpiece weight 4.000 kg
            surface area 1.100 x 1.300 mm
            feed range X-, Y-, Z- axis 0 – 10.000 mm/min
            feed range W-axis 0 - 10.000 mm/min
            rapid motion - x-axis 10.000 mm/min
            Description :
            Equipment.
            • CNC-control HEIDENHAIN 430
            • support bearing
            • manual milling head
            • coolant tank with pump


          Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used  Table Type Boring and Milling Machine Castel GREEN 1T4


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-16220 · Table Type Boring and Milling Machine

          Castel - GREEN 1T4 - - 1997 - HEIDENHAIN TNC 430

          Technical details
          spindle diameter 110 mm︱x-travel 2.100 mm︱y-travel 1.500 mm︱z-travel 1.000 mm︱w-travel 500 ︱control HEIDENHAIN TNC 430 ︱connected load kVA︱Working Spindle - ︱boring quill diameter 110 mm︱spindle taper DIN 69871 ISO 50 ︱spindle power 22 kW︱transmission ratio 2 ︱turning speed range 2.000 U/min︱clamping table - ︱max. workpiece weight 4.000 kg︱surface area 1.100 x 1.300 mm︱feeds ︱feed range X-, Y-, Z- axis 0 – 10.000 mm/min︱feed range W-axis 0 - 10.000 mm/min︱rapid motion - x-axis 10.000 mm/min︱
          Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump
            spindle diameter 110 mm
            x-travel 2.100 mm
            y-travel 1.500 mm
            z-travel 1.000 mm
            w-travel 500
            control HEIDENHAIN TNC 430
            Working Spindle -
            boring quill diameter 110 mm
            spindle taper DIN 69871 ISO 50
            spindle power 22 kW
            transmission ratio 2
            turning speed range 2.000 U/min
            clamping table -
            max. workpiece weight 4.000 kg
            surface area 1.100 x 1.300 mm
            feed range X-, Y-, Z- axis 0 – 10.000 mm/min
            feed range W-axis 0 - 10.000 mm/min
            rapid motion - x-axis 10.000 mm/min
            Description :
            Equipment.
            • CNC-control HEIDENHAIN 430
            • support bearing
            • manual milling head
            • coolant tank with pump


          Datasheet
          Request / Contact

          Bed Type Milling Machine - Universal

          used  Bed Type Milling Machine - Universal PARPAS SHARK One


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1592 · Bed Type Milling Machine - Universal

          PARPAS - SHARK One - - 2016 - HEIDENHAIN iTNC 530 HSCI

          Technical details
          x-travel 3500 mm︱y-travel 1083 mm︱z-travel 1074 mm︱control HEIDENHAIN iTNC 530 HSCI ︱clamping table - ︱surface area 4.000 x 1.000 mm︱Thread bore with fitting - ︱Feeds - ︱X-, Y- and Z-axis, stepless 2 - 30.000 mm/min︱rapid travel x/y/z 30 m/min︱Max. feed force of axis 10.000 N︱2-axis Milling Head - ︱2-axis milling head TUB-E92 with power on - ︱Torque-Motors for 5-axis-simultaneos processing - ︱capacity at 100% load 29 kW︱Speed stepless 2- 30.000 ︱max. torque 92 Nm︱Max. torque 60 min-1︱tool taper HSK 62A-DIN 69893 ︱automatic tool changer ATC -
          Equipment • Machine bed, column and vertical saddle as welded steel construction, annealed with low tension • Milling slider as welded steel construction • Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive via torque motors • Oil cooling unit for cooling the milling head • CNC thermal compensation • Spindle drive 29 kW • Spindle speed max. 18.000 min-1 • Axle drives by means of precision ball screws and digital servo motors • Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and automatic measuring cycles • Milling head Measurement “Kinematics Opt” • Laser tool presetter BLUM - NT version mounted on machine table • CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology • Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable • swivelling control panel for machine operation in front of the machine • Automatic tool changer with 30 magazine places, change position vertical • Coolant system with external shower rim and IKZ through the spindle • 1 chip conveyor in the working area, ejection right • Pretensioned linear guides in all axes • Precision ball screws in Y- and Z-axis • X-axis drive via gear rack and master/slave drive • Hydraulic weight compensation in the vertical axis • Bellows cover of the X-axis • Milling slide above and below in the vertical axis with bellows covers with attached stainless steel lamellas closed • Work area enclosure closed on all sides. Back side of the work area with bellows cover with attached stainless steel lamellas closed. The manual sliding doors on the front of the machine can be opened and closed over the entire length of the table. Safety fencing for the back machine area with two secured access doors.
            x-travel 3500 mm
            y-travel 1083 mm
            z-travel 1074 mm
            control HEIDENHAIN iTNC 530 HSCI
            clamping table -
            surface area 4.000 x 1.000 mm
            Thread bore with fitting -
            Feeds -
            X-, Y- and Z-axis, stepless 2 - 30.000 mm/min
            rapid travel x/y/z 30 m/min
            Max. feed force of axis 10.000 N
            2-axis Milling Head -
            2-axis milling head TUB-E92 with. -
            Torque-Motors for 5-axis-simulta. -
            capacity at 100% load 29 kW
            Speed stepless 2- 30.000
            max. torque 92 Nm
            Max. torque 60 min-1
            tool taper HSK 62A-DIN 69893
            automatic tool changer ATC -
            Description :
            Equipment
            • Machine bed, column and vertical saddle as welded steel construction,
            annealed with low tension
            • Milling slider as welded steel construction
            • Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive
            via torque motors
            • Oil cooling unit for cooling the milling head
            • CNC thermal compensation
            • Spindle drive 29 kW
            • Spindle speed max. 18.000 min-1
            • Axle drives by means of precision ball screws and digital servo motors
            • Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and
            automatic measuring cycles
            • Milling head Measurement “Kinematics Opt”
            • Laser tool presetter BLUM - NT version mounted on machine table
            • CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology
            • Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable
            • swivelling control panel for machine operation in front of the machine
            • Automatic tool changer with 30 magazine places, change position vertical
            • Coolant system with external shower rim and IKZ through the spindle
            • 1 chip conveyor in the working area, ejection right
            • Pretensioned linear guides in all axes
            • Precision ball screws in Y- and Z-axis
            • X-axis drive via gear rack and master/slave drive
            • Hydraulic weight compensation in the vertical axis
            • Bellows cover of the X-axis
            • Milling slide above and below in the vertical axis with bellows covers
            with attached stainless steel lamellas closed
            • Work area enclosure closed on all sides. Back side of the work area with
            bellows cover with attached stainless steel lamellas closed. The manual sliding
            doors on the front of the machine can be opened and closed over the entire
            length of the table.
            Safety fencing for the back machine area with two secured access doors.

          Datasheet
          Request / Contact

          Double Column Milling M/C - Gantry Type

          used  Double Column Milling M/C - Gantry Type TRIMILL VF3016


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1620 · Double Column Milling M/C - Gantry Type

          TRIMILL - VF3016 - - 2017 - HEIDENHAIN iTNC530 HSCI

          Technical details
          x-travel 3.000 mm︱y-travel 1.600 mm︱z-travel 1.200 mm︱control HEIDENHAIN iTNC530 HSCI ︱B-axis (swivelling head) +/- 100 °︱C-axis (milling head rotation axis) +/- 240 °︱feed and rapid traverse : ︱rapid feed Y,X,Z 40.000 m/min︱Rapid traverse B- and C-Axis 50 rpm︱Accelerations (X, Y and Z) 4 m/s²︱Machine table: : ︱Clamping surface 3.500 x 1.750 mm︱T-slots 27 x 22 mm H12 ︱T-slot - distance 125 mm︱max. workpiece load 7.000 kg/m2︱Max. distance table to spindle nose 1.356 mm︱2-Axis Fork Milling Head T21C ︱turning speed range: 10- 24.000 min-1︱Drive power (S1/S6): 42/50 KW︱Torque (S1/S6): 67/84 Nm︱
          Equipment / Accessories • 5-axis vertical portal milling machine in Gantry design. • Fork milling head T21C for simultaneous milling operation with FISCHER spindle, 42kW, 67Nm, 24.000 rpm, HSK-A63 • Manually operated textile roof • Tool changer chain 50-fold, change orientation vertical • 3D probe for workpiece measurement • Process monitoring system MONTRONIX incl. installed vibration sensors for detection of abnormal vibrations during the machining process. Alarm triggering, feed rate reduction or machine stop are carried out via the control system • HEIDENHAIN HR550 handwheel (wireless) • BLUM LaserControl NT for non-contact tool measurement with automatic cover, enables increased process reliability through automatic form and wear control of the tools used • Coolant system KNOLL for cooling lubrication with supply via spray nozzles and supply through the main spindle (ICS) • TRIMILL Kinematics - application for rotary axes • TRIMILL Teleservice - remote support • Linear, absolute and direct path measuring systems make HEIDENHAIN in X, Y and Z axis with a resolution of 0,001mm • Hydraulic power unit • 1 lubrication unit for the machine • 1 lubrication unit for the milling spindle • 1 cooling unit for cooling the milling head • 1 cooling unit for cooling the axis motors • 1 pc. Air extraction unit for oil and cooling lubricant emulsion with three-stage filtering, power consumption 2.2 kW, max. extraction capacity 2,000 m³. Extraction capacity 2.000 m³/h • 2 scraper belt conveyors, positioned along the X-axis to the left and right of the machine table, discharge height approx. 1,050mm program hours on the machine: approx. 8.000h
            x-travel 3.000 mm
            y-travel 1.600 mm
            z-travel 1.200 mm
            control HEIDENHAIN iTNC530 HSCI
            B-axis (swivelling head) +/- 100 °
            C-axis (milling head rotation ax. +/- 240 °
            feed and rapid traverse :
            rapid feed Y,X,Z 40.000 m/min
            Rapid traverse B- and C-Axis 50 rpm
            Accelerations (X, Y and Z) 4 m/s²
            Machine table: :
            Clamping surface 3.500 x 1.750 mm
            T-slots 27 x 22 mm H12
            T-slot - distance 125 mm
            max. workpiece load 7.000 kg/m2
            Max. distance table to spindle n. 1.356 mm
            turning speed range: 10- 24.000 min-1
            Drive power (S1/S6): 42/50 KW
            Torque (S1/S6): 67/84 Nm
            Description :
            Equipment / Accessories
            • 5-axis vertical portal milling machine in Gantry design.
            • Fork milling head T21C for simultaneous milling operation with FISCHER spindle, 42kW, 67Nm, 24.000 rpm, HSK-A63
            • Manually operated textile roof
            • Tool changer chain 50-fold, change orientation vertical
            • 3D probe for workpiece measurement
            • Process monitoring system MONTRONIX incl. installed vibration sensors for detection of abnormal vibrations during the machining process.
            Alarm triggering, feed rate reduction or machine stop are carried out via the control system
            • HEIDENHAIN HR550 handwheel (wireless)
            • BLUM LaserControl NT for non-contact tool measurement with automatic cover, enables increased process reliability through automatic form and wear control of the tools used
            • Coolant system KNOLL for cooling lubrication with supply via spray nozzles and supply through the main spindle (ICS)
            • TRIMILL Kinematics - application for rotary axes
            • TRIMILL Teleservice - remote support
            • Linear, absolute and direct path measuring systems make HEIDENHAIN in X, Y and Z axis with a resolution of 0,001mm
            • Hydraulic power unit
            • 1 lubrication unit for the machine
            • 1 lubrication unit for the milling spindle
            • 1 cooling unit for cooling the milling head
            • 1 cooling unit for cooling the axis motors
            • 1 pc. Air extraction unit for oil and cooling lubricant emulsion with three-stage filtering, power consumption 2.2 kW, max. extraction capacity 2,000 m³. Extraction capacity 2.000 m³/h
            • 2 scraper belt conveyors, positioned along the X-axis to the left and right of the machine table, discharge height approx. 1,050mm

            program hours on the machine: approx. 8.000h

          Datasheet
          Request / Contact

          Travelling column milling machine

          used  Travelling column milling machine PARPAS SHARK One


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-15921 · Travelling column milling machine

          PARPAS - SHARK One - - 2016 - HEIDENHAIN iTNC 530 HSCI

          Technical details
          x-travel 3500 mm︱y-travel 1083 mm︱z-travel 1074 mm︱control HEIDENHAIN iTNC 530 HSCI ︱clamping table - ︱surface area 4.000 x 1.000 mm︱Thread bore with fitting - ︱Feeds - ︱X-, Y- and Z-axis, stepless 2 - 30.000 mm/min︱rapid travel x/y/z 30 m/min︱Max. feed force of axis 10.000 N︱2-axis Milling Head - ︱2-axis milling head TUB-E92 with power on - ︱Torque-Motors for 5-axis-simultaneos processing - ︱capacity at 100% load 29 kW︱Speed stepless 2- 30.000 ︱max. torque 92 Nm︱Max. torque 60 min-1︱tool taper HSK 62A-DIN 69893 ︱automatic tool changer ATC -
          GEquipment • Machine bed, column and vertical saddle as welded steel construction, annealed with low tension • Milling slider as welded steel construction • Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive via torque motors • Oil cooling unit for cooling the milling head • CNC thermal compensation • Spindle drive 29 kW • Spindle speed max. 18.000 min-1 • Axle drives by means of precision ball screws and digital servo motors • Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and automatic measuring cycles • Milling head Measurement “Kinematics Opt” • Laser tool presetter BLUM - NT version mounted on machine table • CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology • Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable • swivelling control panel for machine operation in front of the machine • Automatic tool changer with 30 magazine places, change position vertical • Coolant system with external shower rim and IKZ through the spindle • 1 chip conveyor in the working area, ejection right • Pretensioned linear guides in all axes • Precision ball screws in Y- and Z-axis • X-axis drive via gear rack and master/slave drive • Hydraulic weight compensation in the vertical axis • Bellows cover of the X-axis • Milling slide above and below in the vertical axis with bellows covers with attached stainless steel lamellas closed • Work area enclosure closed on all sides. Back side of the work area with bellows cover with attached stainless steel lamellas closed. The manual sliding doors on the front of the machine can be opened and closed over the entire length of the table. Safety fencing for the back machine area with two secured access doors.
            x-travel 3500 mm
            y-travel 1083 mm
            z-travel 1074 mm
            control HEIDENHAIN iTNC 530 HSCI
            clamping table -
            surface area 4.000 x 1.000 mm
            Thread bore with fitting -
            Feeds -
            X-, Y- and Z-axis, stepless 2 - 30.000 mm/min
            rapid travel x/y/z 30 m/min
            Max. feed force of axis 10.000 N
            2-axis Milling Head -
            2-axis milling head TUB-E92 with. -
            Torque-Motors for 5-axis-simulta. -
            capacity at 100% load 29 kW
            Speed stepless 2- 30.000
            max. torque 92 Nm
            Max. torque 60 min-1
            tool taper HSK 62A-DIN 69893
            automatic tool changer ATC -
            Description :
            GEquipment
            • Machine bed, column and vertical saddle as welded steel construction,
            annealed with low tension
            • Milling slider as welded steel construction
            • Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive
            via torque motors
            • Oil cooling unit for cooling the milling head
            • CNC thermal compensation
            • Spindle drive 29 kW
            • Spindle speed max. 18.000 min-1
            • Axle drives by means of precision ball screws and digital servo motors
            • Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and
            automatic measuring cycles
            • Milling head Measurement “Kinematics Opt”
            • Laser tool presetter BLUM - NT version mounted on machine table
            • CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology
            • Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable
            • swivelling control panel for machine operation in front of the machine
            • Automatic tool changer with 30 magazine places, change position vertical
            • Coolant system with external shower rim and IKZ through the spindle
            • 1 chip conveyor in the working area, ejection right
            • Pretensioned linear guides in all axes
            • Precision ball screws in Y- and Z-axis
            • X-axis drive via gear rack and master/slave drive
            • Hydraulic weight compensation in the vertical axis
            • Bellows cover of the X-axis
            • Milling slide above and below in the vertical axis with bellows covers
            with attached stainless steel lamellas closed
            • Work area enclosure closed on all sides. Back side of the work area with
            bellows cover with attached stainless steel lamellas closed. The manual sliding
            doors on the front of the machine can be opened and closed over the entire
            length of the table.
            Safety fencing for the back machine area with two secured access doors.

          Datasheet
          Request / Contact

          Gear Shaping Machine

          used  Gear Shaping Machine LORENZ LS 82


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1554 · Gear Shaping Machine

          LORENZ - LS 82 - - 1999 - SIEMENS 840 C

          Technical details
          max. wheel diameter 80 mm︱gear width 44 mm︱max. module 5 ︱min. module ︱Control SIEMENS 840 C ︱adjustment axis angle shaping sp. - wp table -0,5 - +0,5 °︱stroke range 250-1.500 DH/min︱centre distance table/shaping spindle -15 bis +170 mm︱max. stroke length 55 mm︱max. helix angle 45 ︱max. tool diameter 180 mm︱feeds: ︱feed rotation axis of workpiece (100 mm wp diam.) mm/min︱feed rotation axis of work piece (100 mm wp. diam. 10-15.700 mm/min︱feed center axis of machine column 1 - 3.750 mm/min︱ 23 kw︱voltage 400 V︱operating frequency 50 Hz︱control voltage 24 V DC︱total power requirement kW︱
          equipment · stroke positioning adjustment controlled by CNC · stroke length adjustment mechanical-manually · machine is fixed to the ground with specific damping shoes (part of the delivery scope) · oil mist exhaust system · tailstock · shaping spindle and lift of shaping head equipped with hydrostatic bearing
            max. wheel diameter 80 mm
            gear width 44 mm
            max. module 5
            Control SIEMENS 840 C
            adjustment axis angle shaping sp. -0,5 - +0,5 °
            stroke range 250-1.500 DH/min
            centre distance table/shaping sp. -15 bis +170 mm
            max. stroke length 55 mm
            max. helix angle 45
            max. tool diameter 180 mm
            feed rotation axis of work piece. 10-15.700 mm/min
            feed center axis of machine colu. 1 - 3.750 mm/min
            23 kw
            voltage 400 V
            operating frequency 50 Hz
            control voltage 24 V DC
            Description :
            equipment
            · stroke positioning adjustment controlled by CNC · stroke length adjustment
            mechanical-manually · machine is fixed to the ground with specific damping
            shoes (part of the delivery scope) · oil mist exhaust system · tailstock ·
            shaping spindle and lift of shaping head equipped with hydrostatic bearing
          Datasheet
          Request / Contact

          Cylindrical Grinding Machine - Universal

          used  Cylindrical Grinding Machine - Universal DANOBAT R3-4000-S5


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1628 · Cylindrical Grinding Machine - Universal

          DANOBAT - R3-4000-S5 - - 2001-2023 -

          Technical details
          grinding diameter 850 mm︱grinding length 4.000 mm︱centre height 525 mm︱workpiece weight max. betw. centres with steady 5.000 kg︱control SINUMERIK 840 D ︱Feeds & travels - ︱feed Z-axis 0,01 – 6.000 mm/min︱feed X-axis 0,01 – 6.000 mm/min︱Travel Z-axis (table) 4.500 mm︱Travel X-axis (grinding spindle) 650 mm︱Grinding wheel - ︱Max. Dimension Ø1.060x60x304,8 mm︱grinding wheel speeds 1.100 min-1︱peripheral speed 45 m/sec︱power 22 kW︱tail stock - ︱Taper MK 6 ︱quill travel 100 mm︱diameter of quill 115 mm︱Workpiece spindle -
          Equipment & Accessories CNC cylindrical grinding machine in most robust design for heavy workpieces • Scope of geometric retrofit: • Slideways of X- and Z-axis regrinded, intermediate table and top table regrinded • Centre height of headstock and tailstock readjusted • Machine checked from the bottom up and rebuilt • Cabling in the machine renewed • Hydraulic tubes and lines renewed • Ball screws of X- and Z-axis renewed • New bellows • Wearing parts replaced • New machine painting in two-layer-structure with oil-resistant and abrasion-resistant two-component paints, color RAL 7035 light gray and RAL 5007 brilliant blue • CNC Control SINUMERIK 840 D • New balancing of the grinding wheel • 2 pc. Grinding wheels Ø 1.000 x 60 x 304,8 mm • 2 pc. Support bearing • Front drivers + 1 pc. travelling tailstock tip • Coolant unit with belt filter • Full enclosure of the workspace with 2 large sliding doors • Extraction unit for emulsion mist
            grinding diameter 850 mm
            grinding length 4.000 mm
            centre height 525 mm
            workpiece weight max. betw. cent. 5.000 kg
            control SINUMERIK 840 D
            Feeds & travels -
            feed Z-axis 0,01 – 6.000 mm/min
            feed X-axis 0,01 – 6.000 mm/min
            Travel Z-axis (table) 4.500 mm
            Travel X-axis (grinding spindle) 650 mm
            Grinding wheel -
            Max. Dimension Ø1.060x60x304,8 mm
            grinding wheel speeds 1.100 min-1
            peripheral speed 45 m/sec
            power 22 kW
            tail stock -
            Taper MK 6
            quill travel 100 mm
            diameter of quill 115 mm
            Workpiece spindle -
            Description :
            Equipment & Accessories
            CNC cylindrical grinding machine in most robust design for heavy workpieces

            • Scope of geometric retrofit:
            • Slideways of X- and Z-axis regrinded, intermediate table and top table
            regrinded
            • Centre height of headstock and tailstock readjusted
            • Machine checked from the bottom up and rebuilt
            • Cabling in the machine renewed
            • Hydraulic tubes and lines renewed
            • Ball screws of X- and Z-axis renewed
            • New bellows
            • Wearing parts replaced
            • New machine painting in two-layer-structure with oil-resistant and
            abrasion-resistant two-component paints, color RAL 7035 light gray and RAL 5007
            brilliant blue
            • CNC Control SINUMERIK 840 D
            • New balancing of the grinding wheel
            • 2 pc. Grinding wheels Ø 1.000 x 60 x 304,8 mm
            • 2 pc. Support bearing
            • Front drivers + 1 pc. travelling tailstock tip
            • Coolant unit with belt filter
            • Full enclosure of the workspace with 2 large sliding doors
            • Extraction unit for emulsion mist

          Datasheet
          Request / Contact

          Optical Profile Grinding Machine

          used  Optical Profile Grinding Machine ABA Powerline


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-15990 · Optical Profile Grinding Machine

          ABA - Powerline - - 2001-2023 - SINUMERK 840 D

          Technical details
          grinding length 1.000 mm︱grinding width 600 mm︱workpiece height 400 mm︱control SINUMERK 840 D ︱Grinding Area : ︱grinding range max. 1.000 x 600 mm︱travel cross (z-axis) 540 mm︱distance table surface - grinding spindle centre max. 600 mm︱Travel vertical (Y-axis) 500 mm︱Max. working height on new grinding wheel 400 mm︱workpiece table : ︱Electro permanent magnetic plate 800 x 500 mm︱pole pitch 18 mm︱clamping force in 8 levels - ︱Table drive (X-axis) : ︱Incremental encoder in the longitudinal axis X axi - ︱table speeds 2-35.000 mm/min︱Electromechanical longitudinal movement - ︱by means of digital servo motor, - ︱toothed belt and ball screw -
          Equipment and accessories - Linear measuring systems in Y- and Z-axis - All linear axes with digital servo motors and ball screw drive - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar - Manual coolant nozzles - adjustable - Automatic working chamber door pneumatically controlled - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm - Automatic grinding wheel balancing device Fa. MPM - Full enclosure of the working area in stainless steel partial execution with LED working area lighting - Manually operated door, safety interlock in automatic mode - Portable electronic handwheel in automatic and manual mode for all axes - Three-color signal light - Electrical equipment 400V/50Hz - Switch cabinet cooling unit - Machine feet - Painting RAL 9002 (grey white), RAL 5010 (gentian blue) - Rinsing gun with hose and holder in the operating area - Approx. 5 pcs. grinding wheel flanges *** Machine prepared for grinding mist suction *** Grinding programs - Surface grinding - Plunge grinding - Profile grinding - Automatic program sequence with roughing, finishing, fine finishing and burnout - Multiple plunge-cut grinding for economical production - Surface grinding with continuous, infinitely programmable cross feed - Calibration of the grinding wheel (calibrate, backfeed, round corners) - Face grinding with back pull dressing - Dressing in grinding cycle with lift-off amount - Fully automatic compensation of dressing amounts - Tool management Dressing Technology Table dresser -straight- TAG: Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding, suitable for corundum and silicon carbide grinding wheels, cycle software with input menu Pre-profiler VPG-150: incl. diamond roughing wheel width 1.5 mm For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for pre-profiling Table profile dresser TAD: Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°. Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°, profiling in the program by means of graphical operator guidance in 3-D interpolation
            grinding length 1.000 mm
            grinding width 600 mm
            workpiece height 400 mm
            control SINUMERK 840 D
            Grinding Area :
            grinding range max. 1.000 x 600 mm
            travel cross (z-axis) 540 mm
            distance table surface - grindin. max. 600 mm
            Travel vertical (Y-axis) 500 mm
            Max. working height on new grind. 400 mm
            workpiece table :
            Electro permanent magnetic plate 800 x 500 mm
            pole pitch 18 mm
            clamping force in 8 levels -
            Table drive (X-axis) :
            Incremental encoder in the longi. -
            table speeds 2-35.000 mm/min
            Electromechanical longitudinal m. -
            by means of digital servo motor, -
            toothed belt and ball screw -
            Description :
            Equipment and accessories
            - Linear measuring systems in Y- and Z-axis
            - All linear axes with digital servo motors and ball screw drive
            - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar
            - Manual coolant nozzles - adjustable
            - Automatic working chamber door pneumatically controlled
            - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm
            - Automatic grinding wheel balancing device Fa. MPM
            - Full enclosure of the working area in stainless steel partial execution with LED working area lighting
            - Manually operated door, safety interlock in automatic mode
            - Portable electronic handwheel in automatic and manual mode for all axes
            - Three-color signal light
            - Electrical equipment 400V/50Hz
            - Switch cabinet cooling unit
            - Machine feet
            - Painting RAL 9002 (grey white), RAL 5010 (gentian blue)
            - Rinsing gun with hose and holder in the operating area
            - Approx. 5 pcs. grinding wheel flanges

            *** Machine prepared for grinding mist suction ***




            Grinding programs
            - Surface grinding
            - Plunge grinding
            - Profile grinding
            - Automatic program sequence with roughing, finishing, fine finishing and burnout
            - Multiple plunge-cut grinding for economical production
            - Surface grinding with continuous, infinitely programmable cross feed
            - Calibration of the grinding wheel (calibrate, backfeed, round corners)
            - Face grinding with back pull dressing
            - Dressing in grinding cycle with lift-off amount
            - Fully automatic compensation of dressing amounts
            - Tool management


            Dressing Technology

            Table dresser -straight- TAG:
            Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding,
            suitable for corundum and silicon carbide grinding wheels, cycle software with input menu

            Pre-profiler VPG-150:
            incl. diamond roughing wheel width 1.5 mm
            For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for
            pre-profiling

            Table profile dresser TAD:
            Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°.
            Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°,
            profiling in the program by means of graphical operator guidance in 3-D interpolation


          Datasheet
          Request / Contact

          Surface Grinding Machine - Horizontal

          used  Surface Grinding Machine - Horizontal ABA Powerline


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1599 · Surface Grinding Machine - Horizontal

          ABA - Powerline - - 2001-2023 - SINUMERK 840 D

          Technical details
          grinding length 1.000 mm︱grinding width 600 mm︱workpiece height 400 mm︱Control SINUMERK 840 D ︱Grinding Area : ︱grinding range max. 1.000 x 600 mm︱travel cross (z-axis) 540 mm︱distance table surface - grinding spindle centre max. 600 mm︱Travel vertical (Y-axis) 500 mm︱Max. working height on new grinding wheel 400 mm︱workpiece table : ︱Electro permanent magnetic plate 800 x 500 mm︱pole pitch 18 mm︱clamping force in 8 levels - ︱Table drive (X-axis) : ︱Incremental encoder in the longitudinal axis X axi - ︱table speeds 2-35.000 mm/min︱Electromechanical longitudinal movement - ︱by means of digital servo motor, - ︱toothed belt and ball screw -
          Equipment and accessories - Linear measuring systems in Y- and Z-axis - All linear axes with digital servo motors and ball screw drive - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar - Manual coolant nozzles - adjustable - Automatic working chamber door pneumatically controlled - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm - Automatic grinding wheel balancing device Fa. MPM - Full enclosure of the working area in stainless steel partial execution with LED working area lighting - Manually operated door, safety interlock in automatic mode - Portable electronic handwheel in automatic and manual mode for all axes - Three-color signal light - Electrical equipment 400V/50Hz - Switch cabinet cooling unit - Machine feet - Painting RAL 9002 (grey white), RAL 5010 (gentian blue) - Rinsing gun with hose and holder in the operating area - Approx. 5 pcs. grinding wheel flanges *** Machine prepared for grinding mist suction *** Grinding programs - Surface grinding - Plunge grinding - Profile grinding - Automatic program sequence with roughing, finishing, fine finishing and burnout - Multiple plunge-cut grinding for economical production - Surface grinding with continuous, infinitely programmable cross feed - Calibration of the grinding wheel (calibrate, backfeed, round corners) - Face grinding with back pull dressing - Dressing in grinding cycle with lift-off amount - Fully automatic compensation of dressing amounts - Tool management Dressing Technology Table dresser -straight- TAG: Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding, suitable for corundum and silicon carbide grinding wheels, cycle software with input menu Pre-profiler VPG-150: incl. diamond roughing wheel width 1.5 mm For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for pre-profiling Table profile dresser TAD: Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°. Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°, profiling in the program by means of graphical operator guidance in 3-D interpolation
            grinding length 1.000 mm
            grinding width 600 mm
            workpiece height 400 mm
            Control SINUMERK 840 D
            Grinding Area :
            grinding range max. 1.000 x 600 mm
            travel cross (z-axis) 540 mm
            distance table surface - grindin. max. 600 mm
            Travel vertical (Y-axis) 500 mm
            Max. working height on new grind. 400 mm
            workpiece table :
            Electro permanent magnetic plate 800 x 500 mm
            pole pitch 18 mm
            clamping force in 8 levels -
            Table drive (X-axis) :
            Incremental encoder in the longi. -
            table speeds 2-35.000 mm/min
            Electromechanical longitudinal m. -
            by means of digital servo motor, -
            toothed belt and ball screw -
            Description :
            Equipment and accessories
            - Linear measuring systems in Y- and Z-axis
            - All linear axes with digital servo motors and ball screw drive
            - Belt filter system with paper belt filter, tank capacity 640 l, coolant pump 200 l/min/4 bar
            - Manual coolant nozzles - adjustable
            - Automatic working chamber door pneumatically controlled
            - Electro-permanent magnetic plate 800 x 500 mm, pendulum pole pitch 18 mm
            - Automatic grinding wheel balancing device Fa. MPM
            - Full enclosure of the working area in stainless steel partial execution with LED working area lighting
            - Manually operated door, safety interlock in automatic mode
            - Portable electronic handwheel in automatic and manual mode for all axes
            - Three-color signal light
            - Electrical equipment 400V/50Hz
            - Switch cabinet cooling unit
            - Machine feet
            - Painting RAL 9002 (grey white), RAL 5010 (gentian blue)
            - Rinsing gun with hose and holder in the operating area
            - Approx. 5 pcs. grinding wheel flanges

            *** Machine prepared for grinding mist suction ***




            Grinding programs
            - Surface grinding
            - Plunge grinding
            - Profile grinding
            - Automatic program sequence with roughing, finishing, fine finishing and burnout
            - Multiple plunge-cut grinding for economical production
            - Surface grinding with continuous, infinitely programmable cross feed
            - Calibration of the grinding wheel (calibrate, backfeed, round corners)
            - Face grinding with back pull dressing
            - Dressing in grinding cycle with lift-off amount
            - Fully automatic compensation of dressing amounts
            - Tool management


            Dressing Technology

            Table dresser -straight- TAG:
            Dresser fixed on the machine table, roughing and finishing station with dressing tiles are arranged one behind the other, cylindrical dressing of grinding wheels for surface and plunge grinding,
            suitable for corundum and silicon carbide grinding wheels, cycle software with input menu

            Pre-profiler VPG-150:
            incl. diamond roughing wheel width 1.5 mm
            For economical pre-profiling (roughing out) of the grinding wheel, profiling unit firmly mounted on the table, suitable for corundum and silicon carbide grinding wheels, CNC dressing cycle for
            pre-profiling

            Table profile dresser TAD:
            Suitable for diamond wheel DFR, D = 120, tip radius r = 0.1 - 1mm, flank angle 28°,40°, 60°.
            Profile depth max. 20 mm, contour accuracy +/- 0.0025 mm, swivel angle +/- 70°,
            profiling in the program by means of graphical operator guidance in 3-D interpolation


          Datasheet
          Request / Contact

          Friction Welding Machine

          used  Friction Welding Machine KUKA RS 12


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1567 · Friction Welding Machine

          KUKA - RS 12 - - 2010 - SIEMENS S7 -CPU 317-PN/DP

          Technical details
          current capacity 250 kVA︱workpiece dia. - mm︱cross cut max. - mm²︱Control SIEMENS S7 -CPU 317-PN/DP ︱Max. friction force 81 kN bei 100 bar︱Min. friction force 5,7 kN bei 7 bar︱Max. upsetting force 120 kN bei 148 bar︱Max. spindle speed 2.500 min-1︱Max. slide stroke 400 mm︱Spindle drive power 147 kW︱Electrical supply data - ︱Nominal voltage 400/50 V/Hz︱Total connected load 250 kVA︱Medium power requirement 50 kW︱Medium power 250 A︱Fuse 630 A slow︱Cable cross section 240 mm²︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Equipment, accessories - KUKA friction welding machine RS 12 - short version - Machine control with electrical cabinet - Control unit Panel PC 677B with step chain diagnosis - Parameter monitoring device PCD 314 - remote diagnosis - Camless slide control - Clamping tools rotary - fixed - safety device - Automatically operated control door - Heating for the hydraulic system - fluid grease lubrication - Scanner integrated in RS 12 - Special drive 147 kW - CE declaration of conformity The cooling of the main motor as well as the switch cabinet was carried out by decentralized service water cooling and must be ensured by a new cold water chiller if necessary.
            current capacity 250 kVA
            workpiece dia. - mm
            cross cut max. - mm²
            Control SIEMENS S7 -CPU 317-PN/DP
            Max. friction force 81 kN bei 100 bar
            Min. friction force 5,7 kN bei 7 bar
            Max. upsetting force 120 kN bei 148 bar
            Max. spindle speed 2.500 min-1
            Max. slide stroke 400 mm
            Spindle drive power 147 kW
            Electrical supply data -
            Nominal voltage 400/50 V/Hz
            Total connected load 250 kVA
            Medium power requirement 50 kW
            Medium power 250 A
            Fuse 630 A slow
            Cable cross section 240 mm²
            Description :
            Equipment, accessories
            - KUKA friction welding machine RS 12 - short version
            - Machine control with electrical cabinet
            - Control unit Panel PC 677B with step chain diagnosis
            - Parameter monitoring device PCD 314
            - remote diagnosis
            - Camless slide control
            - Clamping tools rotary - fixed
            - safety device
            - Automatically operated control door
            - Heating for the hydraulic system
            - fluid grease lubrication
            - Scanner integrated in RS 12
            - Special drive 147 kW
            - CE declaration of conformity

            The cooling of the main motor as well as the switch cabinet was carried out by
            decentralized service water cooling and must be ensured by a new cold water
            chiller if necessary.

          Datasheet
          Request / Contact

          Built-In Rotary Table

          used  Built-In Rotary Table FIBRO FIBROPLAN


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-Z1215 · Built-In Rotary Table

          FIBRO - FIBROPLAN - - unbekannt -

          Technical details
          table diameter 800 mm︱table load 6 t︱table height mm︱weight of the machine ca. 950 kg︱
          NC rotary table make FIBRO type FIBROPLAN Ø 800 mm rotary table with increased geometric accuracy with 8 star-shaped T-slots 18H8 according to DIN650 with centering hole Ø40H6 mounting height 250mm total ratio 1:600 direct measuring system ROD880C/36000 weight approx. 950 kg
            table diameter 800 mm
            table load 6 t
            weight of the machine ca. 950 kg
            Description :
            NC rotary table make FIBRO
            type FIBROPLAN Ø 800 mm
            rotary table with increased geometric accuracy
            with 8 star-shaped T-slots 18H8 according to DIN650
            with centering hole Ø40H6
            mounting height 250mm
            total ratio 1:600
            direct measuring system ROD880C/36000
            weight approx. 950 kg

          Datasheet
          Request / Contact

          Clamping Chuck

          used  Clamping Chuck FORKARDT 3WF 400 K15 S23


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-Z1204 · Clamping Chuck

          FORKARDT - 3WF 400 K15 S23 - - unbekannt -

          Technical details
          diameter 400 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          1 piece 3-jaw power chuck make FORKARDT type 3WF 400 K15 S23 Ø 400 mm with centrifugal force compensation
            diameter 400 mm
            Description :
            1 piece 3-jaw power chuck
            make FORKARDT
            type 3WF 400 K15 S23
            Ø 400 mm
            with centrifugal force compensation

          Datasheet
          Request / Contact

          Cutters

          used  Cutters GLEASON PHOENIX WEDG-AC


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-9889 · Cutters

          GLEASON PHOENIX - WEDG-AC - - fast neu -

          Technical details
          number 31 ︱tool adaptor 55 mm︱diameter 9 Zoll︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          GLEASON WEDG - AC 30 211 006 F7 4655 0003 366
            number 31
            tool adaptor 55 mm
            diameter 9 Zoll
            Description :
            GLEASON WEDG - AC
            30 211 006
            F7 4655 0003 366
          Datasheet
          Request / Contact
          used  Cutters GLEASON HARDAC II


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-9888 · Cutters

          GLEASON - HARDAC II - - fast neu -

          Technical details
          number 20 ︱tool adaptor 55 ︱diameter 9 Zoll︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Type Nr.30212024, F-Nr.F746550002933, Anz. Messer 20, Anz. d. Messerköpfe a. Lager 9 Type Nr.30212025, F-Nr.F746550002934, Anz. Messer 20, Anz. d. Messerköpfe a. Lager 18 Type Nr.30212026, F-Nr.F746550002935, Anz. Messer 20, Anz. d. Messerköpfe a. Lager 25 Type Nr.30212027, F-Nr.F746550002936, Anz. Messer 20, Anz. d. Messerköpfe a. Lager 1 Type Nr.30212006, F-Nr.F746550002939, Anz. Messer 12, Anz. d. Messerköpfe a. Lager 19 Type Nr.30233008, F-Nr.F746550299197, Anz. Messer 22, Anz. d. Messerköpfe a. Lager 2 Alle Werkeuge 9 Zoll
            number 20
            tool adaptor 55
            diameter 9 Zoll
            Description :
            Type Nr.30212024, F-Nr.F746550002933, Anz. Messer 20, Anz. d. Messerköpfe a.
            Lager 9
            Type Nr.30212025, F-Nr.F746550002934, Anz. Messer 20, Anz. d. Messerköpfe a.
            Lager 18
            Type Nr.30212026, F-Nr.F746550002935, Anz. Messer 20, Anz. d. Messerköpfe a.
            Lager 25
            Type Nr.30212027, F-Nr.F746550002936, Anz. Messer 20, Anz. d. Messerköpfe a.
            Lager 1
            Type Nr.30212006, F-Nr.F746550002939, Anz. Messer 12, Anz. d. Messerköpfe a.
            Lager 19
            Type Nr.30233008, F-Nr.F746550299197, Anz. Messer 22, Anz. d. Messerköpfe a.
            Lager 2
            Alle Werkeuge 9 Zoll


          Datasheet
          Request / Contact

          Vise

          used  Vise SINUS


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-Z1211 · Vise

          SINUS - - - unbekannt -

          Technical details
          thickness of jaw 64 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          1 pc. used SINUS vice "094372" jaw width 64 mm jaw height 30 mm max. clamping length 80 mm total height approx. 110 mm base plate 175 x 95 mm
            thickness of jaw 64 mm
            Description :
            1 pc. used SINUS vice "094372"
            jaw width 64 mm
            jaw height 30 mm
            max. clamping length 80 mm
            total height approx. 110 mm
            base plate 175 x 95 mm
          Datasheet
          Request / Contact
          used  Vise SINUS


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-Z1212 · Vise

          SINUS - - - unbekannt -

          Technical details
          thickness of jaw 65 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          1 pc. used SINUS vice "088972 jaw width 65 mm jaw height 30 mm max. clamping length 80 mm total height approx. 92 mm base plate 220 x 130 mm
            thickness of jaw 65 mm
            Description :
            1 pc. used SINUS vice "088972
            jaw width 65 mm
            jaw height 30 mm
            max. clamping length 80 mm
            total height approx. 92 mm
            base plate 220 x 130 mm
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          Fleckenstein Werkzeugmaschinen GmbH   63831 - Wiesen Sommerweg 15 Deutschland
          Fleckenstein Werkzeugmaschinen GmbH

          Sommerweg 15



          Contact Trader


            Fleckenstein Werkzeugmaschinen GmbH
           Sommerweg 15
            63831 - Wiesen
            Deutschland
            +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
            fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
            Contact person:

            Wir sind ein international tätiges Handelsunternehmen für gebrauchte Werkzeugmaschinen und Produktionsanlagen und bereits seit 30 Jahren am Markt etabliert. In unseren Lagern finden Sie ausschließlich hochwertige Maschinen und Produktionsanlagen namenhafter Hersteller. Durch den Ankauf und der Lagerung auf ca. 2.400 m2 kann ein Großteil der Anlagen unter Strom besichtigt werden.
          Nutzen Sie unseren erweiterten Service, Demontage, Montage und Inbetriebnahme bis hin zur produktionsfertigen Übergabe.




          Machine category


          Bettfräsmaschine - Universal · Bohr- und Fräsmaschine · Einbaurundtisch · Fahrständerfräsmaschine · Flachschleifmaschine - Horizontal · Messerköpfe · Portalfräsmaschine verfahrbar · Profilschleifmaschine · Reibschweißmaschine · Rundschleifmaschine - Universal · Schraubstock · Spannfutter · Tischbohrwerk · Zahnradstossmaschine ·