,
Réseau européen de revendeurs de machines de stockage
+49 (0) 2389 5299080
Service de recherche Vendre des machines d'occasion

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:
             Vue: 

          Frech GmbH - Stockist for used machines

          Machinelist:

          Folding Machine

          used Folding Machine RAS Flexibend 73.30

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76572 · Folding Machine

          RAS - Flexibend 73.30 - - 1999 -

          Technical details
          sheet width 3200 mm︱plate thickness 3,00 mm︱distance between columns mm︱max. height of upper beam 300 mm︱total power requirement 4,5 kW︱weight of the machine ca. 4,40 t︱dimensions of the machine ca. 4,30 x 2,30 x 1,75 m︱
          Furnishing • System 5000 control • CNC - controlled back gauge 10-1500mm • Automatic upper and lower tool clamping • Automatic bending beam adjustment • Bombing • Technical documents Tools: • Bending rail 25mm (s = 3mm), segmented • Sharpening rail (8 pieces each 400mm, 7 of which are new and unused)
            sheet width 3200 mm
            plate thickness 3,00 mm
            max. height of upper beam 300 mm
            total power requirement 4,5 kW
            weight of the machine ca. 4,40 t
            dimensions of the machine ca. 4,30 x 2,30 x 1,75 m
            Description :
            Furnishing
            • System 5000 control
            • CNC - controlled back gauge 10-1500mm
            • Automatic upper and lower tool clamping
            • Automatic bending beam adjustment
            • Bombing
            • Technical documents
            Tools:
            • Bending rail 25mm (s = 3mm), segmented
            • Sharpening rail (8 pieces each 400mm, 7 of which are new and unused)
          Datasheet
          Request / Contact
          used Folding Machine RAS 67.30

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76559 · Folding Machine

          RAS - 67.30 - - -

          Technical details
          sheet width 3200 mm︱plate thickness 2,50 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 3,80 t︱dimensions of the machine ca. m︱
          Segmented upper beam rail Manual and automatic bending mode possible Bending angle adjustment via potentiometer
            sheet width 3200 mm
            plate thickness 2,50 mm
            weight of the machine ca. 3,80 t
            Description :
            Segmented upper beam rail
            Manual and automatic bending mode possible
            Bending angle adjustment via potentiometer
          Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Plate Shear - Hydraulic RAS 85.30

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94147 · Plate Shear - Hydraulic

          RAS - 85.30 - - ca. 1988 -

          Technical details
          sheet width 3100 mm︱plate thickness 4,00 mm︱distance between columns mm︱total power requirement 7,50 kW︱weight of the machine ca. 4,20 t︱dimensions of the machine ca. m︱
          - CNC controlled back gauge 10 – 1000mm - central cutting gap adjustment - Pneumatic sheet metal support - Angle stop 2500 mm - 3 support arms
            sheet width 3100 mm
            plate thickness 4,00 mm
            total power requirement 7,50 kW
            weight of the machine ca. 4,20 t
            Description :
            - CNC controlled back gauge 10 – 1000mm
            - central cutting gap adjustment
            - Pneumatic sheet metal support
            - Angle stop 2500 mm
            - 3 support arms
          Datasheet
          Request / Contact
          used Plate Shear - Hydraulic RAS 86.43

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94180 · Plate Shear - Hydraulic

          RAS - 86.43 - - 2000 -

          Technical details
          sheet width 4040 mm︱plate thickness 5,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 9,20 t︱dimensions of the machine ca. m︱
          • Angle stop 1700 mm • Support arms according to photo • Backgauge controlled 1000 mm • pneumatic sheet metal holding device • automatic cutting gap adjustment • Small parts switch to the front • Control System 2005 • Rear safety light barrier Dimensions: L 4.8 x W 2.20 (plus support arms) x H 1.75 m
            sheet width 4040 mm
            plate thickness 5,00 mm
            weight of the machine ca. 9,20 t
            Description :
            • Angle stop 1700 mm
            • Support arms according to photo
            • Backgauge controlled 1000 mm
            • pneumatic sheet metal holding device
            • automatic cutting gap adjustment
            • Small parts switch to the front
            • Control System 2005
            • Rear safety light barrier

            Dimensions: L 4.8 x W 2.20 (plus support arms) x H 1.75 m
          Datasheet
          Request / Contact
          used Plate Shear - Hydraulic RAS 82.20

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94124 · Plate Shear - Hydraulic

          RAS - 82.20 - - -

          Technical details
          sheet width 2040 mm︱plate thickness 2,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 1,10 t︱dimensions of the machine ca. m︱
          Manual back gauge adjustable from the front up to 550 mm Pneumatic sheet metal support
            sheet width 2040 mm
            plate thickness 2,00 mm
            weight of the machine ca. 1,10 t
            Description :
            Manual back gauge adjustable from the front up to 550 mm
            Pneumatic sheet metal support
          Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used Plate Shear - Mechanical RAS 82.10

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-93980 · Plate Shear - Mechanical

          RAS - 82.10 - - -

          Technical details
          sheet width 1040 mm︱plate thickness 2,50 mm︱no. of strokes 63 Hub/min︱cutting angle 1,66 °︱column arm 100 mm︱table height ca. 750 mm︱total power requirement 3,0 kW︱weight of the machine ca. 750 kg︱range L-W-H 1470 x 1550 x 1020 mm︱
          ** Refurbished - shear blades sharpened ** like New (!!) Furnishing: - manual backgauge 0-550 mm - with analogue measuring scale and magnifying glass - adjustable in front, by adjusting lever - 1x long side stop 850 mm - free-moving footswitch - Scratch protection on support table
            sheet width 1040 mm
            plate thickness 2,50 mm
            no. of strokes 63 Hub/min
            cutting angle 1,66 °
            column arm 100 mm
            table height ca. 750 mm
            total power requirement 3,0 kW
            weight of the machine ca. 750 kg
            range L-W-H 1470 x 1550 x 1020 mm
            Description :
            ** Refurbished - shear blades sharpened
            ** like New (!!)

            Furnishing:
            - manual backgauge 0-550 mm
            - with analogue measuring scale and magnifying glass
            - adjustable in front, by adjusting lever
            - 1x long side stop 850 mm
            - free-moving footswitch
            - Scratch protection on support table
          Datasheet
          Request / Contact
          used Plate Shear - Mechanical RAS 82.20

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94185 · Plate Shear - Mechanical

          RAS - 82.20 - - - manuell

          Technical details
          sheet width 2040 mm︱plate thickness 2.00 mm︱thickness at "Niro-steel" 1.25 mm︱no. of strokes 63 Hub/min︱cutting angle 1.10 Grad︱table height 750 mm︱distance between columns 2120 mm︱back stop - adjustable 0 - 550 mm︱column arm 100 mm︱Control manuell ︱engine output 2.8 kW︱weight of the machine ca. 1100 kg.︱range L-W-H 2650 x 1980 x 1400 mm︱
          Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display * adjustable from the front * Continuous adjustment over the entire travel range * Adjustment range 0.0 - 550 mm - Machine side stand with projection .. 100 mm - 1x hold-down bar - 1x long side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - Connection cable including plug - original instruction manual
            sheet width 2040 mm
            plate thickness 2.00 mm
            thickness at "Niro-steel" 1.25 mm
            no. of strokes 63 Hub/min
            cutting angle 1.10 Grad
            table height 750 mm
            distance between columns 2120 mm
            back stop - adjustable 0 - 550 mm
            column arm 100 mm
            Control manuell
            engine output 2.8 kW
            weight of the machine ca. 1100 kg.
            range L-W-H 2650 x 1980 x 1400 mm
            Description :
            Furnishing:
            - robust / motorized swing-cut guillotine shears
            - Shatterproof, torsion-free steel welded construction
            - compact and clear mechanical design
            - manual backgauge, with analogue position display
            * adjustable from the front
            * Continuous adjustment over the entire travel range
            * Adjustment range 0.0 - 550 mm
            - Machine side stand with projection .. 100 mm
            - 1x hold-down bar
            - 1x long side stop with mm scale
            - 2x support arms
            - 1x freely movable foot switch
            - rear sheet metal slide
            - Connection cable including plug
            - original instruction manual


          Datasheet
          Request / Contact
          used Plate Shear - Mechanical RAS 82.10

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94162 · Plate Shear - Mechanical

          RAS - 82.10 - - -

          Technical details
          sheet width 1040 mm︱plate thickness 2,50 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 0,750 t︱dimensions of the machine ca. m︱
          Manual back gauge can be operated from the front up to 500 mm Side stop Knife sharpened
            sheet width 1040 mm
            plate thickness 2,50 mm
            weight of the machine ca. 0,750 t
            Description :
            Manual back gauge can be operated from the front up to 500 mm
            Side stop
            Knife sharpened
          Datasheet
          Request / Contact
          used Plate Shear - Mechanical RAS 83.20

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94172 · Plate Shear - Mechanical

          RAS - 83.20 - - - manuell

          Technical details
          sheet width 2040 mm︱plate thickness 3,00 mm︱thickness at "Niro-steel" 1,50 mm︱no. of strokes 50 Hub/min︱cutting angle 1.4 Grad︱table height 750 mm︱distance between columns 2120 mm︱back stop - adjustable 1.0 - 550 mm︱column arm 100 mm︱Control manuell ︱engine output 5.5 kW︱weight of the machine ca. 2050 kg.︱range L-W-H 2600 x 1980 x 1400 mm︱
          Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display * adjustable from the front * Continuous adjustment over the entire travel range * Adjustment range 1.0 - 550 mm - Machine side stand with projection .. 100 mm - manual cutting gap adjustment - 1x hold-down bar - 1x long side stop - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - 2x EMERGENCY stop buttons at the front - Connection cable including plug - original instruction manual
            sheet width 2040 mm
            plate thickness 3,00 mm
            thickness at "Niro-steel" 1,50 mm
            no. of strokes 50 Hub/min
            cutting angle 1.4 Grad
            table height 750 mm
            distance between columns 2120 mm
            back stop - adjustable 1.0 - 550 mm
            column arm 100 mm
            Control manuell
            engine output 5.5 kW
            weight of the machine ca. 2050 kg.
            range L-W-H 2600 x 1980 x 1400 mm
            Description :
            Furnishing:
            - robust / motorized swing-cut guillotine shears
            - Shatterproof, torsion-free steel welded construction
            - compact and clear mechanical design
            - manual backgauge, with analogue position display
            * adjustable from the front
            * Continuous adjustment over the entire travel range
            * Adjustment range 1.0 - 550 mm
            - Machine side stand with projection .. 100 mm
            - manual cutting gap adjustment
            - 1x hold-down bar
            - 1x long side stop
            - 2x support arms
            - 1x freely movable foot switch
            - rear sheet metal slide
            - 2x EMERGENCY stop buttons at the front
            - Connection cable including plug
            - original instruction manual

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil de commerçant: Frech GmbH

          Contacter le commerçant



            Frech GmbH
           Werderstr. 82
            74889 - Berlin
            Deutschland
            0049-7261-1011">0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de

          Profil de commerçant

          Fondée à 1945 par Karl Frech et dirigée par Mme Nicole Frech en tant que responsable de la génération 3rd, la société peut se prévaloir d'une longue tradition 60 dans la ville de Sinsheim, près de Heidelberg, dans la région de Baden en Allemagne. 

          Sinsheim est situé sur l’autoroute A6, à une heure de route des autoroutes Francfort / Main et Stuttgart. La société FRECH GmbH est spécialisée dans le traitement des équipements usagés (dépoussiéreurs, recoilers, niveleuses à rouleaux, lignes de bobines, lignes de profilage, lignes de refendage, lignes de coupe, laminoirs à froid et rectifieuses à cylindres). 

          En outre, l'équipe FRECH intervient comme agent dans les domaines suivants de machines d'occasion: wagons à bobines, plieuses, rectifieuses, presses plieuses, presses, ferrailleurs et cisailles. Contactez-nous s'il vous plaît !!! - Nous vous aiderons également dans d'autres domaines. Sur une superficie d'environ 1000 mètres carrés de halls et de surfaces de vente, nous présentons une gamme de machines d'occasion en constante évolution, en état de fonctionnement correct et, pour la plupart, propres à la démonstration. 

          Pourquoi des machines d'occasion? 

          Les machines d’occasion sont la plupart du temps immédiatement disponibles et sont prêtes à fonctionner. Frech est votre première adresse lorsque vous souhaitez réduire vos coûts en capital et augmenter l'efficacité économique de vos machines. 

          L'achat et la vente de machines d'occasion est une question de confiance - Frech est votre meilleur contact

          NOS CONTACTS



          Frech GmbH 74889 - Sinsheim Werderstr. 82 Deutschland
          Frech GmbH

          Werderstr. 82



          Contact Trader


            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Deutschland
            0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de
            Contact person:
           

          Trader Profile



          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Abwickelhaspel - Doppel · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Coilanlage · Lochstanze · Längsteilanlage · Profilstahlschere · Querteilanlage · Richtmaschine · Schwenkbiegemaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch ·
          Compendium
          Logiciels
          Contenu des machines d'occasion
          Confidentialité
          Suivez-nous
          © 2000-2024, Logotech oHG · Logiciels et services Internet - Tous droits réservés