,
Réseau européen de revendeurs de machines de stockage
+49 (0) 2389 5299080
Service de recherche Vendre des machines d'occasion

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:
             Vue: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          STEINHAND GmbH - Stockist for used machines

          Machinelist:

          Vertical Turning Machine

          used Vertical Turning Machine EMAG VL2

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1644 · Vertical Turning Machine

          EMAG - VL2 - - 2014 -

          Technical details
          max. turning diameter 160 mm︱max. turning height 150 mm︱max. workpiece diameter 100 mm︱max. workpiece height 150 mm︱max. turning speeds 6.000 U/min︱travel -x axis 700 mm︱travel -z axis 375 mm︱c-axis 360 °︱
          Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2
            max. turning diameter 160 mm
            max. turning height 150 mm
            max. workpiece diameter 100 mm
            max. workpiece height 150 mm
            max. turning speeds 6.000 U/min
            travel -x axis 700 mm
            travel -z axis 375 mm
            c-axis 360 °
            Description :
            Vertical Turning Machine | EMAG - VL2


            equipped with a workpiece conveyor belt.


            The machine is in very good condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VL-2 | VL 2
          Datasheet
          Request / Contact
          used Vertical Turning Machine EMAG VL2

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1646 · Vertical Turning Machine

          EMAG - VL2 - - 2014 -

          Technical details
          max. turning diameter 160 mm︱max. turning height 150 mm︱max. workpiece diameter 100 mm︱max. workpiece height 150 mm︱max. turning speeds 6.000 U/min︱travel -x axis 700 mm︱travel -z axis 375 mm︱c-axis 360 °︱
          Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2
            max. turning diameter 160 mm
            max. turning height 150 mm
            max. workpiece diameter 100 mm
            max. workpiece height 150 mm
            max. turning speeds 6.000 U/min
            travel -x axis 700 mm
            travel -z axis 375 mm
            c-axis 360 °
            Description :
            Vertical Turning Machine | EMAG - VL2


            equipped with a workpiece conveyor belt.


            The machine is in very good condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VL-2 | VL 2
          Datasheet
          Request / Contact
          used Vertical Turning Machine EMAG VTC 250 DUO DD

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1411 · Vertical Turning Machine

          EMAG - VTC 250 DUO DD - - 2007 - Siemens 840-D

          Technical details
          control Siemens 840-D ︱tool taper HSK & VDI 40 ︱- - - - - - - - -︱
          Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
            control Siemens 840-D
            tool taper HSK & VDI 40
            - - - - - - - - -
            Description :
            Vertical Turning Machine EMAG - VTC 250 DUO DD with
            ITC (7-30 bar) and driven tools

            Additional equipment:

            - Workpiece grippers on all 3 turrets
            - 12-position disc turret for driven tools and VDI 40 tool holders,
            - 12-station disc turret with cross-slot and VDI 40 tool holders,
            - 12-station disc turret for driven tools and VDI 40 tool holders,
            - NC steady rest, self-centering,
            - headstock below,
            - tailstock below,

            - chip conveyor
            - Knoll unit 1.500 l,

            - OP10: Three-jaw chuck Rhöm KFD-N 220/3,
            - OP20: Hainbuch Spanntop pull-back BZI65,
            - Live tool for axial and radial machining,
            - Tool holder with Capto 5 quick change system,
            - Artis as tool and process monitoring,


            The machine is in a well-maintained condition.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
          Datasheet
          Request / Contact
          used Vertical Turning Machine EMAG VTC 250 DUO ED

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1410 · Vertical Turning Machine

          EMAG - VTC 250 DUO ED - - 2005 - Siemens 840-D

          Technical details
          control Siemens 840-D ︱tool taper HSK & VDI 40 ︱- - - - - - - - -︱
          Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
            control Siemens 840-D
            tool taper HSK & VDI 40
            - - - - - - - - -
            Description :
            Vertical Turning Machine | EMAG - VTC 250 DUO ED
            with ITC (7-30 bar) and driven tools


            Additional equipment:

            - Workpiece grippers on all 3 turrets,
            - 6-station end-processing turret with HSK tool holder,
            - 12-station disc turret for driven tools and VDI 40 tool holder,
            - 12-position disc revolver with cross slot and VDI 40 tool holder,
            - NC - clamping head,
            - NC bezel, self-centering,
            - EMAG hydraulic double-piston clamping cylinder,
            - tailstock down,
            - Hydraulic double-piston clamping cylinder at the top,
            - chip conveyor,

            - Knoll plant 1.500 l,
            - Coolant supply 7-30 bar,

            - OP20: shaft chuck with retractable jaws and face drivers,
            - Tool holder with Capto 5,
            - Artis quick-change system for tool and process monitoring,
            - Tool pack is included,


            The machine is in a well-maintained condition.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
          Datasheet
          Request / Contact
          used Vertical Turning Machine INDEX V100

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1647 · Vertical Turning Machine

          INDEX - V100 - - 2001 -

          Technical details
          max. turning speeds 10.000 U/min.︱chucking diameter 130 mm︱spindle diameter in front bearing 70 mm︱numbers of positions in the tool changer 12 ︱toolpiece turning speed range 6.000 U/min︱
          Vertical Turning Machine | INDEX - V100 Equipment: - coolant device, - integr. Chip conveyor: Knoll - 320S-1/160 (year 2001) - all-round workpiece carrier system: Schnaithmann (built in 2000) - all-round buffer belt, - Control cabinet, with cooling unit: Rittal The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-100 | V 100
            max. turning speeds 10.000 U/min.
            chucking diameter 130 mm
            spindle diameter in front bearin. 70 mm
            numbers of positions in the tool. 12
            toolpiece turning speed range 6.000 U/min
            Description :
            Vertical Turning Machine | INDEX - V100


            Equipment:
            - coolant device,
            - integr. Chip conveyor: Knoll - 320S-1/160 (year 2001)
            - all-round workpiece carrier system: Schnaithmann (built in 2000)
            - all-round buffer belt,
            - Control cabinet, with cooling unit: Rittal


            The machine is in very good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: V-100 | V 100
          Datasheet
          Request / Contact
          used Vertical Turning Machine INDEX V100

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1648 · Vertical Turning Machine

          INDEX - V100 - - 2001 -

          Technical details
          max. turning speeds 10.000 U/min.︱chucking diameter 130 mm︱spindle diameter in front bearing 70 mm︱numbers of positions in the tool changer 12 ︱toolpiece turning speed range 6.000 U/min︱
          Vertical Turning Machine | INDEX - V100 Equipment: - coolant device, - rotating workpiece transport system, - Chip filter: Knoll-320S-1 (built in 2001), - all-round buffer belt, - Control cabinet, with cooling unit: Rittal The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-100 | V 100
            max. turning speeds 10.000 U/min.
            chucking diameter 130 mm
            spindle diameter in front bearin. 70 mm
            numbers of positions in the tool. 12
            toolpiece turning speed range 6.000 U/min
            Description :
            Vertical Turning Machine | INDEX - V100


            Equipment:
            - coolant device,
            - rotating workpiece transport system,
            - Chip filter: Knoll-320S-1 (built in 2001),
            - all-round buffer belt,
            - Control cabinet, with cooling unit: Rittal


            The machine is in very good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: V-100 | V 100
          Datasheet
          Request / Contact
          used Vertical Turning Machine DIEDESHEIM VF 45-11

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1527 · Vertical Turning Machine

          DIEDESHEIM - VF 45-11 - - 1997 - Siemens - Sinumerik 840

          Technical details
          turning diameter 400 mm︱swing diameter 650 mm︱max. turning height 880 mm︱turning speeds 2.500 U/min︱main spindle drive 64 kW︱Control Siemens - Sinumerik 840 ︱travel -x axis 500 mm︱travel -z axis 500 mm︱Feed - X 30 mm/min︱feedrate - Z 30 mm/min︱driven tools turning speeds 4.000 U/min︱diam. of main spindle in forward position 160 mm︱numbers of positions in the tool changer 8 ︱tool holder -shaft diameter 50 mm︱chucking diameter 400 mm︱
          Vertical Turning Machine | DIEDESHEIM - VF 45-11 with driven tools and ITC The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VF45-11 | VF 45 | VF-45 | VF45
            turning diameter 400 mm
            swing diameter 650 mm
            max. turning height 880 mm
            turning speeds 2.500 U/min
            main spindle drive 64 kW
            Control Siemens - Sinumerik 840
            travel -x axis 500 mm
            travel -z axis 500 mm
            Feed - X 30 mm/min
            feedrate - Z 30 mm/min
            driven tools turning speeds 4.000 U/min
            diam. of main spindle in forward. 160 mm
            numbers of positions in the tool. 8
            tool holder -shaft diameter 50 mm
            chucking diameter 400 mm
            Description :
            Vertical Turning Machine | DIEDESHEIM - VF 45-11
            with driven tools and ITC


            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VF45-11 | VF 45 | VF-45 | VF45
          Datasheet
          Request / Contact

          Deephole Boring Machine

          used Deephole Boring Machine TIBO tibo. E 40-1-1000

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1517 · Deephole Boring Machine

          TIBO - tibo. E 40-1-1000 - - 2018 -

          Technical details
          number of spindles 1 ︱Solid drill diameter 5 - 40 mm︱bore depth 1.000 mm︱spindle motor 17 kW︱number of spindle speeds 200 - 6.000 U/min︱feed 10 - 500 mm/min︱rapid traverse 3.000 mm / min︱Dimensions (L x W x H) 5.100 x 2.000 x 2.000 mm︱weight of the machine 6.200 kg︱
          Deep hole drilling machine | TIBO - tibo. E 40-1-1000 The machine is in a very well-maintained condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: tibo E 40 1 1000 | tibo E40
            number of spindles 1
            Solid drill diameter 5 - 40 mm
            bore depth 1.000 mm
            spindle motor 17 kW
            number of spindle speeds 200 - 6.000 U/min
            feed 10 - 500 mm/min
            rapid traverse 3.000 mm / min
            Dimensions (L x W x H) 5.100 x 2.000 x 2.000 mm
            weight of the machine 6.200 kg
            Description :
            Deep hole drilling machine | TIBO - tibo. E 40-1-1000


            The machine is in a very well-maintained condition.

            For additional equipment information please refer
            to the original order confirmation which is included
            in the offer of this machine.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: tibo E 40 1 1000 | tibo E40
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used Machining Center - Horizontal MAZAK HCN-5000/50

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1668 · Machining Center - Horizontal

          MAZAK - HCN-5000/50 - - 2017 - MAZATROL SmoothG

          Technical details
          travel -x axis 730 mm︱travel -y axis 730 mm︱travel -z axis 800 mm︱control MAZATROL SmoothG ︱max. workpiece diameter 800 mm︱workpiece height max. 1.000 mm︱tool adaptor SK50 ︱number of spindle speeds 10.000 U/min︱plate size 500 x 500 mm︱table load 700 kg︱numbers of positions in the tool changer 120 ︱
          Milling machining centers - horizontal | MAZAK - HCN-5000/50 equipped with chip conveyor, tool changer, measuring system and 2-way pallet changer. Scope of delivery : An extensive tool package is in the Scope of delivery includes. Additional equipment: - Pallet changer: 2-way - NC rotary table (0,001° x 360.000 Positionen) The machine has been commissioned by MAZAK at the end of 2019 and has only 305 H spindle hours. The machine is in a very well-maintained, like-new condition and can be inspected under power at any time in the Swiss factory location. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HC-Nexus 5000 | HCN 5000-50 | HCN 5000 | HCN5000
            travel -x axis 730 mm
            travel -y axis 730 mm
            travel -z axis 800 mm
            control MAZATROL SmoothG
            max. workpiece diameter 800 mm
            workpiece height max. 1.000 mm
            tool adaptor SK50
            number of spindle speeds 10.000 U/min
            plate size 500 x 500 mm
            table load 700 kg
            numbers of positions in the tool. 120
            Description :
            Milling machining centers - horizontal | MAZAK - HCN-5000/50 equipped with
            chip conveyor, tool changer, measuring system and 2-way pallet changer.

            Scope of delivery :
            An extensive tool package is in the Scope of delivery includes.

            Additional equipment:
            - Pallet changer: 2-way
            - NC rotary table (0,001° x 360.000 Positionen)

            The machine has been commissioned by MAZAK
            at the end of 2019 and has only 305 H spindle hours.

            The machine is in a very well-maintained, like-new condition and
            can be inspected under power at any time in the Swiss factory location.

            For additional equipment information please refer
            to the original order confirmation which is included in the offer of this
            machine.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: HC-Nexus 5000 | HCN 5000-50 | HCN 5000 | HCN5000
          Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used Milling Machining Centers 5 Axis HERMLE C 40 UP

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1611 · Milling Machining Centers 5 Axis

          HERMLE - C 40 UP - - 2008 - Heidenhain TNC 530

          Technical details
          travel -x axis 850 mm︱travel -y axis 700 mm︱travel -z axis 500 mm︱control Heidenhain TNC 530 ︱turning speeds 10.000 U/min︱numbers of positions in the tool changer 195 ︱tool taper HSK-A 63 ︱
          5-axis simultaneous machining center | HERMLE - C 40 UP equipped with ITC (80 bar) & additional tool changer and Pallet changer. Additional equipment: - Swivel axis and rotary table - 2 compartment plate changer (PW 800) - incl. 2x pallets 630 x 630 (diameter 800 mm) - tool breakage control by laser The machine is in a well-maintained condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 40 | C40 | C-40 | C40U | C 40 U | C40 U
            travel -x axis 850 mm
            travel -y axis 700 mm
            travel -z axis 500 mm
            control Heidenhain TNC 530
            turning speeds 10.000 U/min
            numbers of positions in the tool. 195
            tool taper HSK-A 63
            Description :
            5-axis simultaneous machining center | HERMLE - C 40 UP
            equipped with ITC (80 bar) & additional tool changer and Pallet changer.


            Additional equipment:
            - Swivel axis and rotary table
            - 2 compartment plate changer (PW 800)
            - incl. 2x pallets 630 x 630 (diameter 800 mm)
            - tool breakage control by laser


            The machine is in a well-maintained condition.

            For additional equipment information please refer
            to the original order confirmation which is included
            in the offer of this machine.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: C 40 | C40 | C-40 | C40U | C 40 U | C40 U
          Datasheet
          Request / Contact
          used Milling Machining Centers 5 Axis DMG DMC 125 U

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1658 · Milling Machining Centers 5 Axis

          DMG - DMC 125 U - - 2002 - HEIDENHAIN

          Technical details
          travel -x axis 1.250 mm︱travel -y axis 880 mm︱travel -z axis 800 mm︱control HEIDENHAIN ︱turning speeds 10.000 U/min︱numbers of positions in the tool changer 120 ︱tool taper SK50 ︱
          5-axis simultaneous machining center | DMG - DMC 125 U equipped with automatic B-axis Equipment/accessories: - 4 pallets - Handwheel - Blown air spindle center - Measuring probe: TS 641 The machine is in a well-maintained condition and can be inspected at any time under power. Please find further equipment information about this machine in the original documents included in the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMC125U | DMC-125U | DMC 125U | DMC125 | DMC-125
            travel -x axis 1.250 mm
            travel -y axis 880 mm
            travel -z axis 800 mm
            control HEIDENHAIN
            turning speeds 10.000 U/min
            numbers of positions in the tool. 120
            tool taper SK50
            Description :
            5-axis simultaneous machining center | DMG - DMC 125 U
            equipped with automatic B-axis


            Equipment/accessories:
            - 4 pallets
            - Handwheel
            - Blown air spindle center
            - Measuring probe: TS 641


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            Please find further equipment information about this
            machine in the original documents included in the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DMC125U | DMC-125U | DMC 125U | DMC125 | DMC-125
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Horizontal

          used Bed Type Milling Machine - Horizontal SHW UFZ 5 S

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1655 · Bed Type Milling Machine - Horizontal

          SHW - UFZ 5 S - - 2001 - Heidenhain TNC 430

          Technical details
          travel -x axis 3.000 mm︱travel -y axis 1.600 mm︱travel -z axis 1.300 mm︱control Heidenhain TNC 430 ︱turning speed range 6.000 U/min︱Number of axles 6 St.︱numbers of positions in the tool changer 66 ︱tool taper SK 50 ︱surface area 2.000 x 1.600 mm︱table load 12.000 kg︱
          Bed Type Milling Machine - Universal | SHW - UFZ 5 S equipped with two chip conveyor and a round table Equipment/accessories: - Rückle round table: type PKTF 55, - Universal milling head UFK milling head holder, 360x1 degree swiveling, - Milling head can be swiveled 180x1 degrees - 4-sided work area paneling with electrical. tumbler - Reinforced coolant system 25 l/min at 25 bar; 500 liters container - 2x chip conveyor ejection height 1250mm - Radio measuring probe - 1 set of fixators - electronic handwheel Further information: - July 2019 Exchange spindle installed - February 2019 Y-axis drive motor replaced - February 2022 new main spindle motor installed - February 2022 Cooling unit overhauled The machine is in very good condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GTA 4 | GTA4 42S | GTA-4 | GTA 4 42 S
            travel -x axis 3.000 mm
            travel -y axis 1.600 mm
            travel -z axis 1.300 mm
            control Heidenhain TNC 430
            turning speed range 6.000 U/min
            Number of axles 6 St.
            numbers of positions in the tool. 66
            tool taper SK 50
            surface area 2.000 x 1.600 mm
            table load 12.000 kg
            Description :
            Bed Type Milling Machine - Universal | SHW - UFZ 5 S
            equipped with two chip conveyor and a round table


            Equipment/accessories:

            - Rückle round table: type PKTF 55,
            - Universal milling head UFK milling head holder, 360x1 degree swiveling,
            - Milling head can be swiveled 180x1 degrees
            - 4-sided work area paneling with electrical. tumbler
            - Reinforced coolant system 25 l/min at 25 bar; 500 liters container
            - 2x chip conveyor ejection height 1250mm
            - Radio measuring probe
            - 1 set of fixators
            - electronic handwheel


            Further information:

            - July 2019 Exchange spindle installed
            - February 2019 Y-axis drive motor replaced
            - February 2022 new main spindle motor installed
            - February 2022 Cooling unit overhauled


            The machine is in very good condition.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: GTA 4 | GTA4 42S | GTA-4 | GTA 4 42 S
          Datasheet
          Request / Contact

          Milling Machine - Vertical

          used Milling Machine - Vertical HURCO VMX 30

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1657 · Milling Machine - Vertical

          HURCO - VMX 30 - - 2005 -

          Technical details
          travel -x axis 760 mm︱travel -y axis 510 mm︱travel -z axis 610 mm︱control for program Ultimax 4 ︱turning speeds 10.000 U/min︱numbers of positions in the tool changer 24 ︱tool taper SK40 ︱table-size 1.020 x 510 mm︱
          Milling Machine - Vertical | HUROC - VMX 30 equipped with ITC. The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMX30 | VMX-30
            travel -x axis 760 mm
            travel -y axis 510 mm
            travel -z axis 610 mm
            control for program Ultimax 4
            turning speeds 10.000 U/min
            numbers of positions in the tool. 24
            tool taper SK40
            table-size 1.020 x 510 mm
            Description :
            Milling Machine - Vertical | HUROC - VMX 30 equipped with ITC.


            The machine is in very good condition.

            A machine video from the production plant will be shared on request.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VMX30 | VMX-30
          Datasheet
          Request / Contact
          used Milling Machine - Vertical FEHLMANN Picomax 90-M

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1633 · Milling Machine - Vertical

          FEHLMANN - Picomax 90-M - - 2004 - Heidenhain - iTNC 530

          Technical details
          travel -x axis 705 mm︱travel -y axis 425 mm︱travel -z axis 610 mm︱control Heidenhain - iTNC 530 ︱turning speed range 50 - 20.000 U/min︱numbers of positions in the tool changer 32 ︱tool taper SK30 ︱
          Universal Milling Machine | FEHLMANN - Picomax 90-M Scope of delivery: - extensive package of tools - swivel rotary table (4th + 5th axis) The machine is in a well-maintained condition. Please refer to the offer for further technical details. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PICOMAX90M | PICOMAX90 M | PICOMAX-90 M
            travel -x axis 705 mm
            travel -y axis 425 mm
            travel -z axis 610 mm
            control Heidenhain - iTNC 530
            turning speed range 50 - 20.000 U/min
            numbers of positions in the tool. 32
            tool taper SK30
            Description :
            Universal Milling Machine | FEHLMANN - Picomax 90-M


            Scope of delivery:

            - extensive package of tools
            - swivel rotary table (4th + 5th axis)

            The machine is in a well-maintained condition.

            Please refer to the offer for further technical details.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: PICOMAX90M | PICOMAX90 M | PICOMAX-90 M
          Datasheet
          Request / Contact
          used Milling Machine - Vertical IBARMIA ZV-58 / L6000

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1448 · Milling Machine - Vertical

          IBARMIA - ZV-58 / L6000 - - 2004 - Heidenhain - iTNC530

          Technical details
          travel -x axis 6.000 mm︱travel -y axis 1.000 mm︱travel -z axis 800 mm︱control Heidenhain - iTNC530 ︱distance vertical spindle / table 1.000 mm︱table-size 3.300 x 1.050 mm︱number of T-slots 7 ︱T-slot - width 125 ︱
          Travelling column milling machine | IBARMIA - ZV-58 / L6000 Further information / scope of delivery: - Clamping system mounted on the table (see pictures) - Normal T-slot table installed under clamping system - Renishaw probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZV-58 L6000 | ZV-58 / L 6000 | ZV58L6000
            travel -x axis 6.000 mm
            travel -y axis 1.000 mm
            travel -z axis 800 mm
            control Heidenhain - iTNC530
            distance vertical spindle / tabl. 1.000 mm
            table-size 3.300 x 1.050 mm
            number of T-slots 7
            T-slot - width 125
            Description :
            Travelling column milling machine | IBARMIA - ZV-58 / L6000


            Further information / scope of delivery:

            - Clamping system mounted on the table (see pictures)
            - Normal T-slot table installed under clamping system
            - Renishaw probe


            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: ZV-58 L6000 | ZV-58 / L 6000 | ZV58L6000
          Datasheet
          Request / Contact

          milling machining centers - horizontal

          used milling machining centers - horizontal QUASER HX504 AE

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1530 · milling machining centers - horizontal

          QUASER - HX504 AE - - 2010 - FANUC Oi-MD

          Technical details
          travel -x axis 760 mm︱travel -y axis 640 mm︱travel -z axis 760 mm︱surface area 500 x 500 mm︱control FANUC Oi-MD ︱numbers of positions in the tool changer 60 ︱
          Milling machining centers - horizontal | QUASER - HX504 AE The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HX504AE | HX 504 AE | HX-504 AE | HX 504AE
            travel -x axis 760 mm
            travel -y axis 640 mm
            travel -z axis 760 mm
            surface area 500 x 500 mm
            control FANUC Oi-MD
            numbers of positions in the tool. 60
            Description :
            Milling machining centers - horizontal | QUASER - HX504 AE


            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: HX504AE | HX 504 AE | HX-504 AE | HX 504AE
          Datasheet
          Request / Contact
          used milling machining centers - horizontal MORI SEIKI NH8000 DCG

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1634 · milling machining centers - horizontal

          MORI SEIKI - NH8000 DCG - - 2008 - FANUC - MSX-701III

          Technical details
          travel -x axis 1.400 mm︱travel -y axis 1.200 mm︱travel -z axis 1.350 mm︱control FANUC - MSX-701III ︱numbers of positions in the tool changer 60 ︱tool taper HSK 100 ︱max. Spindle speed 8.000 U/min.︱max. tool length 800 mm︱max. tool weight 30 kg︱
          Milling machining centers - horizontal | MORI SEIKI - NH8000 DCG equipped with additional 4th axis. Equipment: - B-axis (rotary table): 360,000 X 0.0001, - 2-fold pallet changing system, - Pallet dimensions 800 mm x 800 mm, The machine is in a well-maintained condition with approx. 30.000 (h) Power-On hours. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MORI-SEIKI | NH 8000 | NH8000DCG | NH-8000
            travel -x axis 1.400 mm
            travel -y axis 1.200 mm
            travel -z axis 1.350 mm
            control FANUC - MSX-701III
            numbers of positions in the tool. 60
            tool taper HSK 100
            max. Spindle speed 8.000 U/min.
            max. tool length 800 mm
            max. tool weight 30 kg
            Description :
            Milling machining centers - horizontal | MORI SEIKI - NH8000 DCG
            equipped with additional 4th axis.


            Equipment:
            - B-axis (rotary table): 360,000 X 0.0001,
            - 2-fold pallet changing system,
            - Pallet dimensions 800 mm x 800 mm,


            The machine is in a well-maintained condition
            with approx. 30.000 (h) Power-On hours.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MORI-SEIKI | NH 8000 | NH8000DCG | NH-8000
          Datasheet
          Request / Contact
          used milling machining centers - horizontal HYUNDAI-KIA HS630

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1531 · milling machining centers - horizontal

          HYUNDAI-KIA - HS630 - - 2008 - FANUC 18i-M

          Technical details
          travel -x axis 1.050 mm︱travel -y axis 875 mm︱travel -z axis 875 mm︱control FANUC 18i-M ︱NC rotary table 630 x 630 ︱numbers of positions in the tool changer 60 ︱Dimensions (L x W x H) 3.525 x 5.650 x 3.526 mm︱weight of the machine 20.000 kg︱
          Milling machining centers - horizontal | HYUNDAI KIA - HS630 equipped with ITC (30bar), chip conveyor & RENISHAW tool changer. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HYUNDAI WIA - HS630 | HS 630 | HS-630
            travel -x axis 1.050 mm
            travel -y axis 875 mm
            travel -z axis 875 mm
            control FANUC 18i-M
            NC rotary table 630 x 630
            numbers of positions in the tool. 60
            Dimensions (L x W x H) 3.525 x 5.650 x 3.526 mm
            weight of the machine 20.000 kg
            Description :
            Milling machining centers - horizontal | HYUNDAI KIA - HS630
            equipped with ITC (30bar), chip conveyor & RENISHAW tool changer.


            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: HYUNDAI WIA - HS630 | HS 630 | HS-630
          Datasheet
          Request / Contact
          used milling machining centers - horizontal TOYODA FH630SX

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1659 · milling machining centers - horizontal

          TOYODA - FH630SX - - 2007 - FANUC31iMA

          Technical details
          number of spindle speeds 6.000 U/min︱tool taper BT50 ︱numbers of positions in the tool changer 121 ︱control FANUC31iMA ︱
          Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX
            number of spindle speeds 6.000 U/min
            tool taper BT50
            numbers of positions in the tool. 121
            control FANUC31iMA
            Description :
            Milling machining centers - horizontal | TOYODA - FH630SX
            equipped with ITC and chip conveyor.


            Additional equipment:
            + Full NC table 360.000 * 0,001 deg


            The machine is in a well-maintained condition.

            Technical data of the machine will follow soon.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX
          Datasheet
          Request / Contact
          used milling machining centers - horizontal TOYODA FH63S

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1660 · milling machining centers - horizontal

          TOYODA - FH63S - - 2000 - FANUC16i

          Technical details
          travel -x axis 1.000 mm︱travel -y axis 850 mm︱travel -z axis 750 mm︱spindle turning speed range 35 - 6.000 U/min︱numbers of positions in the tool changer 60 ︱table dimension - longitudinal 630 x 630 mm︱control FANUC16i ︱
          Milling machining centers - horizontal | TOYODA - FH63S equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630 | FH63 | FH-63 | FH 63
            travel -x axis 1.000 mm
            travel -y axis 850 mm
            travel -z axis 750 mm
            spindle turning speed range 35 - 6.000 U/min
            numbers of positions in the tool. 60
            table dimension - longitudinal 630 x 630 mm
            control FANUC16i
            Description :
            Milling machining centers - horizontal | TOYODA - FH63S
            equipped with ITC and chip conveyor.


            Additional equipment:
            + Full NC table 360.000 * 0,001 deg


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: FH 630 | FH63 | FH-63 | FH 63
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used milling machining centers - vertical MTcut V 110 T

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1594 · milling machining centers - vertical

          MTcut - V 110 T - - 2008 -

          Technical details
          travel -x axis 1.100 mm︱travel -y axis 610 mm︱travel -z axis 610 mm︱table dimension (L x W) 1.250 x 610 mm︱tool adaptor SK40 ︱numbers of positions in the tool changer 30 ︱table diameter 250 mm︱
          Milling machining centers - vertical | MTcut - V 110 T with NC swivel rotary table (TT251HEE08) The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: #Tags: V110T | V-110 T | V-110T | V 110T | V110
            travel -x axis 1.100 mm
            travel -y axis 610 mm
            travel -z axis 610 mm
            table dimension (L x W) 1.250 x 610 mm
            tool adaptor SK40
            numbers of positions in the tool. 30
            table diameter 250 mm
            Description :
            Milling machining centers - vertical | MTcut - V 110 T
            with NC swivel rotary table (TT251HEE08)


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: #Tags: V110T | V-110 T | V-110T | V 110T | V110
          Datasheet
          Request / Contact
          used milling machining centers - vertical AXA DBZ

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1476 · milling machining centers - vertical

          AXA - DBZ - - 2007 - Siemens 840 D

          Technical details
          travel -x axis 2x 750 mm︱travel -y axis 500 mm︱travel -z axis 600 mm︱control Siemens 840 D ︱turning speeds 30 - 6.000 U/min︱tool taper SK 40 ︱numbers of positions in the tool changer 22 ︱surface area 2x (1.000 x 500) mm︱Dimensions (L x W x H) 4.100 x 2.300 x 2.600 mm︱
          Double-place machining center (shuttle operation) | AXA - DBZ Additional equipment: The machine comes with a 4th axis on each side processing in tack setting. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:
            travel -x axis 2x 750 mm
            travel -y axis 500 mm
            travel -z axis 600 mm
            control Siemens 840 D
            turning speeds 30 - 6.000 U/min
            tool taper SK 40
            numbers of positions in the tool. 22
            surface area 2x (1.000 x 500) mm
            Dimensions (L x W x H) 4.100 x 2.300 x 2.600 mm
            Description :
            Double-place machining center (shuttle operation) | AXA - DBZ


            Additional equipment:
            The machine comes with a 4th axis on each side processing in tack setting.


            The machine is in very good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags:
          Datasheet
          Request / Contact
          used milling machining centers - vertical HAAS TM-1 HF

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1590 · milling machining centers - vertical

          HAAS - TM-1 HF - - 2005 - Haas

          Technical details
          travel -x axis 762 mm︱travel -y axis 305 mm︱travel -z axis 406 mm︱control Haas ︱
          Milling machining centers - vertical | Haas - TM-1 HF The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TM1 HF | TM-1HF | TM1HF | TM-1-HF
            travel -x axis 762 mm
            travel -y axis 305 mm
            travel -z axis 406 mm
            control Haas
            Description :
            Milling machining centers - vertical | Haas - TM-1 HF


            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: TM1 HF | TM-1HF | TM1HF | TM-1-HF
          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used Planer-Type Milling M/C - Double Column WALDRICH-COBURG 15S - 10 FPF 300 NC

          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland
          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1671 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - 15S - 10 FPF 300 NC - - 1994 / 2011 - 840D sl

          Technical details
          travel -x axis 7.200 mm︱travel -y axis 4.200 mm︱travel -z axis 1.750 mm︱Control 840D sl ︱daylight 2300 mm︱distance between columns 3500 mm︱size of pallet 5000 x 3000 mm︱table load 65 t︱milling drive 50 kW︱spindle taper ISO 60 ︱c-axis 7500 Nm︱spindle diameter 150 mm︱turning speed range - milling 10 - 4000 U/min︱feed - rapid adjustment 10 - 15000 mm/min︱b-axis +/- 90 °︱total power requirement 92 kW︱weight of the machine ca. 380 t︱
          Planer-Type Milling M/C - Double Column | WALDRICH COBURG - 15S - 10 FPF 300 NC - heavy-duty double-column milling machine (molds and dies) - 2 pallet stations with 2 pallets (load 65to each) - 2009 retrofit to SIEMENS 840Dsl (including complete electric wiring and new switch cabinet) - in 2011 change of all servo drives - 50kW NC universal milling head (2.5deg Hirth)(WALDRICH USP300C450F15S) - 40kW NC-forkhead (2-axis)(WALDRICH UFN00SZ500) - various (angular) milling heads - NC tool changer (76 tools ISO50 and ISO60) - chip conveyor The machine is in very good condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 15 S | 15-S | WACO
            travel -x axis 7.200 mm
            travel -y axis 4.200 mm
            travel -z axis 1.750 mm
            Control 840D sl
            daylight 2300 mm
            distance between columns 3500 mm
            size of pallet 5000 x 3000 mm
            table load 65 t
            milling drive 50 kW
            spindle taper ISO 60
            c-axis 7500 Nm
            spindle diameter 150 mm
            turning speed range - milling 10 - 4000 U/min
            feed - rapid adjustment 10 - 15000 mm/min
            b-axis +/- 90 °
            total power requirement 92 kW
            weight of the machine ca. 380 t
            Description :
            Planer-Type Milling M/C - Double Column | WALDRICH COBURG - 15S - 10 FPF 300 NC

            - heavy-duty double-column milling machine (molds and dies)
            - 2 pallet stations with 2 pallets (load 65to each)
            - 2009 retrofit to SIEMENS 840Dsl
            (including complete electric wiring and new switch cabinet)
            - in 2011 change of all servo drives
            - 50kW NC universal milling head (2.5deg Hirth)(WALDRICH USP300C450F15S)
            - 40kW NC-forkhead (2-axis)(WALDRICH UFN00SZ500)
            - various (angular) milling heads
            - NC tool changer (76 tools ISO50 and ISO60)
            - chip conveyor

            The machine is in very good condition.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: 15 S | 15-S | WACO
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   
            •
          Steinhand GmbH 45527 - Hattingen Am Stahlwerk 15 Deutschland
          Steinhand GmbH

          Am Stahlwerk 15



          Contact Trader


            Steinhand GmbH
           Am Stahlwerk 15
            45527 - Hattingen
            Deutschland
            +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
            info@steinhand.de
            www.steinhand.de
            Contact person:
           

          Trader Profile



          Machine category


          Bandsäge · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Horizontal · CNC Dreh- und Fräszentrum · CNC Dreh- und Schleifzentrum - vertikal · CNC Drehmaschine · Drehmaschine - zyklengesteuert · Entgratmaschine · Fahrständerfräsmaschine · Feinschleifmaschine · Flachschleifmaschine · Fräsmaschine - Vertikal · Gabelstapler - Diesel · Kopfdrehbank · Kurbelwellenschleifmaschine · Kurvendrehautomat · Langdrehautomat · Portal - Bearbeitungszentrum · Portalfräsmaschine · Reibschweißmaschine · Rundschleifmaschine · Rundtisch · Spitzenlose - Rundschleifmaschine · Tieflochbohrmaschine · Vertikaldrehmaschine · Werkzeugschleifmaschine · Zahnrad-Abwälzfräsmaschine - horizontal ·
          Compendium
          Logiciels
          Contenu des machines d'occasion
          Confidentialité
          Suivez-nous
          © 2000-2024, Logotech oHG · Logiciels et services Internet - Tous droits réservés