,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Engelfried Maschinentechnik GmbH - Stockist for used machines

          Machinelist:


          4 side moulder

          used  4 side moulder WEINIG Powermat 400 CNC_Powerlock


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2692 · 4 side moulder

          WEINIG - Powermat 400 CNC_Powerlock - - gebraucht -

          Technical details
          Number of spindles 6 St.︱Working width 230 mm︱Working height 120 mm︱Length of the planing table 2500 mm︱Feed motor 4 kW︱Feed speed 5-30 m/min.︱
          Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----------------------------------------------------------------------- Short summary: ----------------------------------------------------------------------- 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ----------------------------------------------------------------------- Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm Axial adjustment range: 5 mm Rebating device MarathonCoatin for table insert in front of 1st lower tool holder 2. Tool holder - PowerLock - right ------------------------------------------------ Motor with brake: 11.0 kW Common motor with left tool holder Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 3. Tool holder - PowerLock - left ------------------------------------------------ Motor with brake: Common motor with the 2nd spindle Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 4. Tool holder - PowerLock - above ------------------------------------------------ Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Radial CNC-controlled spindle 5. Tool holder - PowerLock - above ------------------------------------------------ Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max. : 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Spindle axially and radially CNC controlled 6. Tool holder - PowerLock - below ------------------------------------------------ Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Max throat depth: 15 mm Axial adjustment range: 35 mm Radial CNC-controlled spindle feed system ------------------------------------------------ Frequency-controlled feed, infinitely adjustable with brake: 4 kW, 5 - 30 m/min Feed roller in front of the 1st lower tool pneumatically controlled up/down. Durofer toothed rollers (Weinig patent) with depth limiter and self-cleaning. Adjustment range of the feed rollers compared to the left tool holder, axial 35 mm Reduction of the feed roller distances to 510 mm, including additional feed rollers after the upper tool holders (diameter 140 mm) and shortened roller spacing, roller width 50 mm machine electrics ------------------------------------------------ Operating voltage 400 V (voltage range 380 - 420 volts), 50 Hz. Electrical design according to DIN VDE 0113, electrical equipment from Industrial machinery EN60204, IEC-204-1. Other electrical regulations are not considered. Machine stands, tables and stops ------------------------------------------------ Dressing table: 2500 mm long (including joint ruler) Manual Waxilit pump for table resin removal A driven rubber roller in the outfeed table - 50 mm wide A driven, hardened steel roller in the machine table, spring-loaded - 150 mm broad pressure elements and guides ------------------------------------------------ A lateral pressure roller in front of the left tool holder, moving and sprung. Lateral pressure roller on the infeed table, spring-loaded machine operation ------------------------------------------------ Control: memory function For saving the setting values ??of profiles. Tool holder axes with electronic digital displays. Function: Saving the setting values ??of the manufactured profile at the push of a button under a profile number. If the profile number is selected again, the electronic double displays show the setting values. By manually adjusting the tool holders, the displays in matched. 99 memory locations. Basic equipment for installing the CNC-controlled adjustment and positioning 3 x axial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function for tool holders 2,3,5 5 x radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function for tool holders 2,3,4,5,6 CNC - controlled adjustment and positioning of the feed high/low in connection with the memory function Lubrication points for the axial tool holder adjustment. Central location of greasing points at the front of the machine. safety and soundproofing ------------------------------------------------ Full security fairing Electromagnetic locking of the safety cover interior light Machine without machining tools (Technical information according to the manufacturer - without guarantee!)
            Number of spindles 6 St.
            Working width 230 mm
            Working height 120 mm
            Length of the planing table 2500 mm
            Feed motor 4 kW
            Feed speed 5-30 m/min.
            Description :
            Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled
            -----------------------------------------------------------------------

            Short summary:
            -----------------------------------------------------------------------
            6 spindles with 8,000 rpm
            5 x HSK/Powerlock
            Axial and radial CNC adjustment of the spindles via control
            CNC - controlled adjustment and positioning of the feed


            Detailed description:
            -----------------------------------------------------------------------

            Technical specifications:
            Working width: 20-230 mm
            Working height: 8-120 mm

            Number of spindles: 6

            1. Tool holder - below
            ------------------------------------------------
            Motor with brake: 5.5 kW
            Spindle diameter: 40mm
            Speed: 6,000 rpm
            Tool flight circle: 93 - 160 mm
            Axial adjustment range: 5 mm
            Rebating device
            MarathonCoatin for table insert in front of 1st lower tool holder

            2. Tool holder - PowerLock - right
            ------------------------------------------------
            Motor with brake: 11.0 kW
            Common motor with left tool holder
            Speed ??including high-performance ball bearing: 8,000 rpm
            Tool flight circle 40 mm below table level: 93 - 200 mm
            Tool flight circle 55 mm below table level: 93 - 180 mm
            Tool cutting circle for straight cutter heads max. 163 mm
            Max. tool diameter behind stop level: 180 mm
            Max throat depth: 35 mm
            Axial adjustment range: 55 mm
            Spindle axially and radially CNC controlled

            3. Tool holder - PowerLock - left
            ------------------------------------------------
            Motor with brake: Common motor with the 2nd spindle
            Speed ??including high-performance ball bearing: 8,000 rpm
            Tool flight circle 40 mm below table level: 93 - 200 mm
            Tool flight circle 55 mm below table level: 93 - 180 mm
            Tool cutting circle for straight cutter heads max. 163 mm
            Max throat depth: 35 mm
            Axial adjustment range: 55 mm
            Spindle axially and radially CNC controlled

            4. Tool holder - PowerLock - above
            ------------------------------------------------
            Motor with brake: 7.5 kW
            Speed ??including high-performance ball bearing: 8,000 rpm
            Tool flight circle: 93 - 200 mm
            Tool cutting circle for straight cutter heads max.: 180 mm
            Max throat depth: 35 mm
            Axial adjustment range: 40 mm
            Divided pressure shoe in front of the upper tool holder, on tool flight circle
            adjustable and pivoting away from the tool, spring-loaded.
            Radial CNC-controlled spindle

            5. Tool holder - PowerLock - above
            ------------------------------------------------
            Motor with brake: 7.5 kW
            Speed ??including high-performance ball bearing: 8,000 rpm
            Tool flight circle: 93 - 200 mm
            Tool cutting circle for straight cutter heads max. : 180 mm
            Max throat depth: 35 mm
            Axial adjustment range: 40 mm
            Divided pressure shoe in front of the upper tool holder, on tool flight circle
            adjustable and pivoting away from the tool, spring-loaded.
            Spindle axially and radially CNC controlled

            6. Tool holder - PowerLock - below
            ------------------------------------------------
            Motor with brake: 7.5 kW
            Speed ??including high-performance ball bearing: 8,000 rpm
            Tool flight circle: 93 - 200 mm
            Max throat depth: 15 mm
            Axial adjustment range: 35 mm
            Radial CNC-controlled spindle

            feed system
            ------------------------------------------------
            Frequency-controlled feed, infinitely adjustable with brake: 4 kW, 5 - 30 m/min
            Feed roller in front of the 1st lower tool pneumatically controlled up/down.
            Durofer toothed rollers (Weinig patent) with depth limiter and self-cleaning.
            Adjustment range of the feed rollers compared to the left tool holder, axial 35
            mm
            Reduction of the feed roller distances to 510 mm,
            including additional feed rollers after the upper tool holders
            (diameter 140 mm) and shortened roller spacing, roller width 50 mm

            machine electrics
            ------------------------------------------------
            Operating voltage 400 V (voltage range 380 - 420 volts), 50 Hz.
            Electrical design according to DIN VDE 0113, electrical equipment from
            Industrial machinery EN60204, IEC-204-1. Other electrical regulations are
            not considered.

            Machine stands, tables and stops
            ------------------------------------------------
            Dressing table: 2500 mm long (including joint ruler)
            Manual Waxilit pump for table resin removal

            A driven rubber roller in the outfeed table - 50 mm wide
            A driven, hardened steel roller in the machine table, spring-loaded - 150 mm
            broad

            pressure elements and guides
            ------------------------------------------------
            A lateral pressure roller in front of the left tool holder, moving and
            sprung.
            Lateral pressure roller on the infeed table, spring-loaded

            machine operation
            ------------------------------------------------
            Control: memory function
            For saving the setting values ??of profiles.
            Tool holder axes with electronic digital displays.
            Function:
            Saving the setting values ??of the manufactured profile at the push of a button
            under a profile number.
            If the profile number is selected again, the electronic double displays show
            the setting values.
            By manually adjusting the tool holders, the displays in
            matched. 99 memory locations.
            Basic equipment for installing the CNC-controlled adjustment
            and positioning

            3 x axial CNC-controlled adjustment and positioning of the tool holders
            in conjunction with the memory function for tool holders 2,3,5

            5 x radial CNC-controlled adjustment and positioning of the tool holders
            in conjunction with the memory function for tool holders 2,3,4,5,6

            CNC - controlled adjustment and positioning of the feed
            high/low in connection with the memory function

            Lubrication points for the axial tool holder adjustment.
            Central location of greasing points at the front of the machine.

            safety and soundproofing
            ------------------------------------------------
            Full security fairing
            Electromagnetic locking of the safety cover
            interior light

            Machine without machining tools

            (Technical information according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used  4 side moulder WEINIG Powermat 500 Fenster


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2712 · 4 side moulder

          WEINIG - Powermat 500 Fenster - - gebraucht - Weinig PowerCom

          Technical details
          Number of spindles 6 St.︱Working width 230 mm︱Working height 120 mm︱Length of the planing table 2500 mm︱Feed motor 4 kW︱Feed speed 5-30 m/min.︱Control Weinig PowerCom
          Weinig Powermat 500 for window production --------------------------------------------- Machine will be checked at our warehouse Short summary: --------------------------------------------- 6 Spindles with 8,000 rpm and 7.5 KW 5 x HSK/Powerlock Window package with glazing bead separation Spindles axially and radially CNC controlled right and upper spindles with common pneumatic timing for Glazing bead cutting Large control Powercom with touchscreen Detailed description: --------------------------------------------- Tool arrangement No. 018 for window production Technical specifications: --------------------------------------------- Working width 20 - 230 mm (at tool cutting circle 93 - 125 mm) Working height 8 - 120 mm (at tool cutting circle 93 - 125 mm) 1. Tool holder --------------------------------------------- First lower tool holder Motor with brake 7.5 KW Diameter: 40mm Speed 8,000 rpm including high-performance ball bearings Tool flight circle 125 - 180 mm In connection with PowerLock 93 - 180 mm Axial adjustment range 17 mm Hardened table insert in front of the 1st lower tool holder 2. POWERLOCK/HSK tool holder --------------------------------------------- First right tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Adjustment path radial Min. tool diameter at stop level 93 mm Max. tool diameter behind stop level 200 mm Axially and radially CNC controlled 3. POWERLOCK/HSK tool holder --------------------------------------------- First left tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Pressure shoe in front of the left tool holder, including 2 lateral pressure rollers, spring-loaded Axially and radially CNC controlled 4. POWERLOCK/HSK tool holder --------------------------------------------- First upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 5. POWERLOCK/HSK tool holder --------------------------------------------- Second upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 6. POWERLOCK/HSK tool holder --------------------------------------------- Second lower tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Adjustment path axial 40 mm Adjustment path radial Min. tool diameter to table level 93 mm Max. tool diameter 6 mm under table level 225 mm Axially and radially CNC controlled Stop on the 2nd lower spindle for round rod milling cutters excepted Additional short table tops before and after the lower spindle for profiling work with large valley depths All tool holders with high concentricity. Lubrication points for the axial tool holder movement. feed system --------------------------------------------- Frequency-controlled feed, 5 - 30 m/min. infinitely variable with brake 4 KW Feed roller in front of the 1st lower tool pneumatic high-low controlled Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment path of the feed rollers opposite left tool holder, axial 35 mm Reduction of the center distances between the feed pendulums to 400 mm included additional feed roller (diameter 95 mm and 140 mm) and shortened roller spacing machine electrics --------------------------------------------- Operating voltage 400 volts (Voltage range 380 x 420 volts), 50 Hz Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Other electrical regulations are not included. Control cabinet (with control panel) separately from Machine, distance control cabinet-machine: 2.5 m Machine stand, table and stops --------------------------------------------- Dressing table 2.5 m long (incl. jointing ruler) Manual Waxilit pump for table resin removal. A driven rubber roller in the outfeed table, 50 mm wide, air cushion system in the machine table, 1 track controlled via pendulum shafts. pressure rollers and guides --------------------------------------------- Pressure rollers from above, spring-loaded Lateral pressure roller on the infeed table, spring-loaded Additional discharge for round bar production after the second upper spindle machine operation Window package 1 Powermat 500/018 --------------------------------------------- 1. Right spindle pneumatically clocked axially (55 mm) 1st and 2nd upper spindle pneumatically clocked axially by selector switch (40 mm), saw blade max. 180 mm. Discharge after the 1st upper spindle axially manually adjustable (at 0,12,0,18) Joint control of the right and top Spindle (axial stroke) and the glazing bead discharge via manual selector switch in control panel Glazing bead removal after (last) upper one Spindle pneumatic forwards/backwards. Additional non-powered feed pendulum after the last upper spindle to hold down the square bar Stops to the right spindle at 35 mm left out for cutting out square strips Machine prepared for electrical linking for parts - return system including emergency stop chain parts monitoring Window package 2 Powermat 500/018 --------------------------------------------- PowerCom, touch screen Guide ruler to the left spindle 8 mm thick, pneumatic controlled to timber width. standard rulers are omitted, The standard working width of the complete machine is reduced from 230mm to 200mm. For last production manually set to wood width Motorized axle adjustments: 5 radial motorized adjustment and positioning of the tool holders in connection with PowerCom, spindle no. 2,3,4,5,6 5 axial motorized adjustment and positioning of the tool holders in connection with PowerCom, spindle no. 2,3,4,5,6 Motorized axis adjustment and positioning of the feed up/down in connection with the PowerCOM Central location of greasing points at the front of the machine PowerCom control: --------------------------------------------- Profile and tool data management software Setting values can be calculated or saved. These are shown on the electronic double displays. Touchscreen - function for graphically supported operation 10,000 profile and tool storage locations each Integrated network card for connection to OptiContro or other PCs USB connection for manual data transfer safety and soundproofing --------------------------------------------- Safety full fairing Easily foldable safety hood with window covers the entire work area and protects against mechanical Driven. When the safety hood is raised, tool holders and feed switched off automatically. With the CE version, the safety cover can be opened during automatic mode is not possible. Electromagnetic locking of the safety hood (only after the tools have come to a standstill, approx. 15 seconds, the hood can be opened) The machine comes with CE mark and associated EC declaration of conformity supplied. Two interior lights in the safety hood For ripping work, e.g. sawing and multiple profiling, you need suitable protective devices. Option: existing PowerLock spindles and tools Option: Outfeed conveyor belt with discharge for glazing bead (technical data according to the manufacturer - without guarantee!)
            Number of spindles 6 St.
            Working width 230 mm
            Working height 120 mm
            Length of the planing table 2500 mm
            Feed motor 4 kW
            Feed speed 5-30 m/min.
            Control Weinig PowerCom
            Description :
            Weinig Powermat 500 for window production
            ---------------------------------------------
            Machine will be checked at our warehouse

            Short summary:
            ---------------------------------------------
            6 Spindles with 8,000 rpm and 7.5 KW
            5 x HSK/Powerlock
            Window package with glazing bead separation
            Spindles axially and radially CNC controlled
            right and upper spindles with common pneumatic timing for
            Glazing bead cutting
            Large control Powercom with touchscreen

            Detailed description:
            ---------------------------------------------
            Tool arrangement No. 018 for window production

            Technical specifications:
            ---------------------------------------------
            Working width 20 - 230 mm (at tool cutting circle 93 - 125 mm)
            Working height 8 - 120 mm (at tool cutting circle 93 - 125 mm)

            1. Tool holder
            ---------------------------------------------
            First lower tool holder
            Motor with brake 7.5 KW
            Diameter: 40mm
            Speed 8,000 rpm
            including high-performance ball bearings
            Tool flight circle 125 - 180 mm
            In connection with PowerLock 93 - 180 mm
            Axial adjustment range 17 mm
            Hardened table insert in front of the 1st lower tool holder

            2. POWERLOCK/HSK tool holder
            ---------------------------------------------
            First right tool holder
            Motor with brake 7.5 KW
            Speed 8,000 rpm
            including high-performance ball bearings
            Tool flight circle 93 - 200 mm
            Maximum throat depth 35 mm
            Axial adjustment range for spindle 80 mm
            Axial adjustment range for PowerLock 55 mm
            Adjustment path radial
            Min. tool diameter at stop level 93 mm
            Max. tool diameter behind stop level 200 mm
            Axially and radially CNC controlled

            3. POWERLOCK/HSK tool holder
            ---------------------------------------------
            First left tool holder
            Motor with brake 7.5 KW
            Speed 8,000 rpm
            including high-performance ball bearings
            Tool flight circle 93 - 200 mm
            Tool cutting circle for straight cutter heads max. 163 mm
            Maximum throat depth 35 mm
            Axial adjustment range for spindle 80 mm
            Axial adjustment range for PowerLock 55 mm
            Pressure shoe in front of the left tool holder,
            including 2 lateral pressure rollers, spring-loaded
            Axially and radially CNC controlled

            4. POWERLOCK/HSK tool holder
            ---------------------------------------------
            First upper tool holder
            Motor with brake 7.5 KW
            Speed 8,000 rpm
            including high-performance ball bearings
            Tool flight circle 93 - 200 mm
            Tool cutting circle for straight cutter heads max. 163 mm
            Maximum throat depth 35 mm
            Adjustment path axial 40 mm
            Axially and radially CNC controlled

            5. POWERLOCK/HSK tool holder
            ---------------------------------------------
            Second upper tool holder
            Motor with brake 7.5 KW
            Speed 8,000 rpm
            including high-performance ball bearings
            Tool flight circle 93 - 200 mm
            Tool cutting circle for straight cutter heads max. 163 mm
            Maximum throat depth 35 mm
            Adjustment path axial 40 mm
            Axially and radially CNC controlled

            6. POWERLOCK/HSK tool holder
            ---------------------------------------------
            Second lower tool holder
            Motor with brake 7.5 KW
            Speed 8,000 rpm
            including high-performance ball bearings
            Tool flight circle 93 - 225 mm
            Maximum throat depth 15 mm
            Adjustment path axial 40 mm
            Adjustment path radial
            Min. tool diameter to table level 93 mm
            Max. tool diameter 6 mm under table level 225 mm
            Axially and radially CNC controlled

            Stop on the 2nd lower spindle for round rod milling cutters excepted

            Additional short table tops before and after the lower spindle
            for profiling work with large valley depths

            All tool holders with high concentricity.
            Lubrication points for the axial tool holder movement.

            feed system
            ---------------------------------------------
            Frequency-controlled feed, 5 - 30 m/min.
            infinitely variable with brake 4 KW
            Feed roller in front of the 1st lower tool
            pneumatic high-low controlled
            Durofer pointed tooth rollers (Weinig patent)
            with depth limiter and self-cleaning
            Adjustment path of the feed rollers opposite
            left tool holder, axial 35 mm
            Reduction of the center distances between the feed pendulums to 400 mm included
            additional feed roller (diameter 95 mm and 140 mm)
            and shortened roller spacing

            machine electrics
            ---------------------------------------------
            Operating voltage 400 volts
            (Voltage range 380 x 420 volts), 50 Hz
            Electrical design according to DIN VDE 0113,
            electrical equipment of industrial machines
            EN60204, IEC-204-1. Other electrical regulations
            are not included.
            Control cabinet (with control panel) separately from
            Machine, distance control cabinet-machine: 2.5 m

            Machine stand, table and stops
            ---------------------------------------------
            Dressing table 2.5 m long (incl. jointing ruler)
            Manual Waxilit pump for table resin removal.
            A driven rubber roller in the outfeed table,
            50 mm wide, air cushion system in the machine table,
            1 track controlled via pendulum shafts.

            pressure rollers and guides
            ---------------------------------------------
            Pressure rollers from above, spring-loaded
            Lateral pressure roller on the infeed table, spring-loaded
            Additional discharge for round bar production after the second upper spindle

            machine operation
            Window package 1 Powermat 500/018
            ---------------------------------------------
            1. Right spindle pneumatically clocked axially (55 mm)
            1st and 2nd upper spindle pneumatically clocked axially by selector switch
            (40 mm), saw blade max. 180 mm.
            Discharge after the 1st upper spindle axially manually adjustable (at 0,12,0,18)
            Joint control of the right and top
            Spindle (axial stroke) and the glazing bead discharge
            via manual selector switch in control panel
            Glazing bead removal after (last) upper one
            Spindle pneumatic forwards/backwards.
            Additional non-powered feed pendulum
            after the last upper spindle to hold down
            the square bar
            Stops to the right spindle at 35 mm
            left out for cutting out square strips
            Machine prepared for electrical linking
            for parts - return system including emergency stop chain
            parts monitoring

            Window package 2 Powermat 500/018
            ---------------------------------------------
            PowerCom, touch screen
            Guide ruler to the left spindle 8 mm thick, pneumatic
            controlled to timber width. standard rulers are omitted,
            The standard working width of the complete machine is reduced
            from 230mm to 200mm. For last production manually
            set to wood width

            Motorized axle adjustments:

            5 radial motorized adjustment and positioning of the tool holders
            in connection with PowerCom, spindle no. 2,3,4,5,6

            5 axial motorized adjustment and positioning of the tool holders
            in connection with PowerCom, spindle no. 2,3,4,5,6

            Motorized axis adjustment and positioning of the feed up/down
            in connection with the PowerCOM

            Central location of greasing points at the front of the machine

            PowerCom control:
            ---------------------------------------------
            Profile and tool data management software
            Setting values can be calculated or saved.
            These are shown on the electronic double displays.
            Touchscreen - function for graphically supported operation
            10,000 profile and tool storage locations each
            Integrated network card for connection to OptiContro or other PCs
            USB connection for manual data transfer

            safety and soundproofing
            ---------------------------------------------
            Safety full fairing
            Easily foldable safety hood with window covers
            the entire work area and protects against mechanical
            Driven.
            When the safety hood is raised, tool holders
            and feed switched off automatically.
            With the CE version, the safety cover can be opened during
            automatic mode is not possible.
            Electromagnetic locking of the safety hood
            (only after the tools have come to a standstill, approx. 15 seconds,
            the hood can be opened)
            The machine comes with CE mark and associated
            EC declaration of conformity supplied.
            Two interior lights in the safety hood
            For ripping work, e.g. sawing and multiple profiling,
            you need suitable protective devices.

            Option: existing PowerLock spindles and tools
            Option: Outfeed conveyor belt with discharge for glazing bead


            (technical data according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used  4 side moulder WEINIG Profimat 23


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2734 · 4 side moulder

          WEINIG - Profimat 23 - - gebraucht -

          Technical details
          Number of spindles 6 St.︱Working width 230 mm︱Working height 120 mm︱Length of the planing table 2500 mm︱Feed motor 4 kW︱Feed speed 5-24 m/min.︱total power requirement 27 kw︱Dimensions (L/W/H) 3900 x 2200 x 2000 mm︱weight of the machine ca. 2500 kg︱
          Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ------------------------------------- Machine will be checked ! Technical data summary (please inquire about any additional accessories included) ------------------------------------- Generally ------------------------------------- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed motor: 4 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ------------------------------------- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ------------------------------------- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ------------------------------------- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)
            Number of spindles 6 St.
            Working width 230 mm
            Working height 120 mm
            Length of the planing table 2500 mm
            Feed motor 4 kW
            Feed speed 5-24 m/min.
            total power requirement 27 kw
            Dimensions (L/W/H) 3900 x 2200 x 2000 mm
            weight of the machine ca. 2500 kg
            Description :
            Weinig four-side planer Profimat 23 window version with
            glazing bead removal,
            ATS control and program control
            -------------------------------------
            Machine will be checked !

            Technical data summary
            (please inquire about any additional accessories included)
            -------------------------------------

            Generally
            -------------------------------------
            > Working width: 230 mm
            > Working height: 120 mm
            > Number of spindles: 6 pieces.
            > Dressing table length: 2500 mm
            > Feed motor: 4 kW
            > Feed speed: 5-24 m/min
            > Total power requirement: 27 kW
            > Dimensions: 3900 x 2200 x 2000 mm
            > Machine weight, approx.: 2500 kg

            Spindle arrangement
            -------------------------------------
            > Spindle 1: bottom
            > Spindle 2: right, pneumatically clocked up-down
            > Spindle 3: left
            > Spindle 4: top
            > Spindle 5: bottom
            > Spindle 6: Glass bead saw pneumatically up and down

            Spindle description
            -------------------------------------
            > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter
            > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter
            > Spindle 3: 6000 rpm, 40 mm diameter
            > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter
            > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter
            > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter

            Other features
            -------------------------------------
            > Glazing bead removal
            > ATS control, automatic 2-axis positioning for width and height (left and
            upper spindle) with program memory 99 programs
            > Machine operation: window package
            Joint control of the right spindle and the glazing bead removal via manual
            selector switch in the control panel
            > Spindles with mechanical digital display


            Option:
            used planer heads

            (technical data according to the manufacturer - no guarantee!)
          Datasheet
          Request / Contact
          used  4 side moulder WEINIG Unimat 23 E


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2722 · 4 side moulder

          WEINIG - Unimat 23 E - - gebraucht -

          Technical details
          Number of boring spindles 6 St.︱Working width 230 mm︱Working height 120 mm︱
          1 WEINIG planing and moulding machine Unimat 23 - 6 spindles, year 2000 Machine will be checked by our technicians! -------------------------------------- Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle below 5.5 KW mechanical brake Diameter 40mm Speed ??6000 rpm Tool flight circle 125 - 180 mm Folding device including tools Table insert hardened in front of the 1st lower spindle 2nd spindle right 7.5 KW mechanical brake common motor with left vertical spindle Diameter 40mm Speed ??6000 rpm Tool flight circle 112-250 mm Max. tool diameter behind stop level 203 mm Max. throat depth 35 mm Adjustment path axial 80 mm Right spindle pneumatically axial via selector switch (40 mm) controlled. 3. Spindle on the left common motor with 2nd spindle Diameter 40mm Speed ??6000 rpm Tool flight circle 112-200 mm Max. throat depth 35 mm Adjustment path axial 80 mm Pressure shoe in front of the left spindle, incl. lateral roller pressure, spring-loaded 4th spindle above 5.5 KW mechanical brake Diameter 40mm Speed ??6000 rpm Tool flight circles 112-200 mm Max. throat depth 35 mm Adjustment path axial 45 mm Spindle pneumatically by selector switch axial (40 mm) controlled, max. saw diameter 200 mm 5. Spindle below 4 KW mechanical brake Diameter 40mm Speed ??6000 rpm Tool flight circle 112-250 mm Max. throat depth 15 mm Adjustment path axial 45 mm 6th spindle 2.2 KW from above For cutting out the glazing bead from above, incl. riving knife and non-return pawl (without glazing bead removal) Diameter 40mm Speed ??6000 rpm Tool flight circle max. 180 mm Suction diameter 80 mm Radial pneumatically controlled spindles in general All fillet spindles with high concentricity. Lubrication points for the axial spindle movement. Common control (pneumatic) of the right Spindle, upper spindle and saw unit. feed system Motor with mechanical brake, 3 KW Mechanical feed infinitely adjustable 5 - 24 m/min. Feed roller in front of the 1st lower tool pneumatic high-low controlled, Durofer toothed rollers (Weinig patent) with Depth limiter and self-cleaning Adjustment path of the feed rollers opposite left Spindle, axial 35 mm Extension of the pendulum axle compared to the left ones Spindles to 150 mm machine electrics Operating voltage 380-400-415 volts, 50 Hz. Machine stands, tables and stops Dressing table 2 m long (incl. jointing ruler) Manual Waxilit pump for table resin removal A driven rubber roller (sprung in the outfeed table) pressure elements and guides Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS system, automatic 2 axis Positioning for spindle #3 and #4 Min. working height 12 mm Electrical height adjustment of the upper spindles and the feed Central position of lubrication points on the machine front safety and soundproofing Full security fairing Easily foldable safety hood with Window. Covers the entire workspace (feed and spindles) and protects against mechanical hazards. When lifting the Safety hood become spindles and feed switched off automatically. An interior light in the safety hood. Short parts package 490 mm, program memory 96 programs possible Option: Workpiece return with longitudinal and cross conveyor Option: planing heads (Technical information according to the manufacturer - without guarantee!)
            Number of boring spindles 6 St.
            Working width 230 mm
            Working height 120 mm
            Description :
            1 WEINIG planing and moulding machine Unimat 23 - 6 spindles, year 2000
            Machine will be checked by our technicians!
            --------------------------------------
            Working width 20 - 230 mm
            Working height 8 - 120 mm

            1st spindle below 5.5 KW
            mechanical brake
            Diameter 40mm
            Speed ??6000 rpm
            Tool flight circle 125 - 180 mm
            Folding device including tools
            Table insert hardened in front of the 1st lower spindle

            2nd spindle right 7.5 KW
            mechanical brake
            common motor with left vertical spindle
            Diameter 40mm
            Speed ??6000 rpm
            Tool flight circle 112-250 mm
            Max. tool diameter behind stop level 203 mm
            Max. throat depth 35 mm
            Adjustment path axial 80 mm
            Right spindle pneumatically axial via selector switch
            (40 mm) controlled.

            3. Spindle on the left
            common motor with 2nd spindle
            Diameter 40mm
            Speed ??6000 rpm
            Tool flight circle 112-200 mm
            Max. throat depth 35 mm
            Adjustment path axial 80 mm
            Pressure shoe in front of the left spindle, incl.
            lateral roller pressure, spring-loaded

            4th spindle above 5.5 KW
            mechanical brake
            Diameter 40mm
            Speed ??6000 rpm
            Tool flight circles 112-200 mm
            Max. throat depth 35 mm
            Adjustment path axial 45 mm
            Spindle pneumatically by selector switch
            axial (40 mm) controlled, max. saw diameter 200 mm

            5. Spindle below 4 KW
            mechanical brake
            Diameter 40mm
            Speed ??6000 rpm
            Tool flight circle 112-250 mm
            Max. throat depth 15 mm
            Adjustment path axial 45 mm

            6th spindle 2.2 KW from above
            For cutting out the glazing bead from above,
            incl. riving knife and non-return pawl (without
            glazing bead removal)
            Diameter 40mm
            Speed ??6000 rpm
            Tool flight circle max. 180 mm
            Suction diameter 80 mm
            Radial pneumatically controlled

            spindles in general
            All fillet spindles with high concentricity.
            Lubrication points for the axial spindle movement.
            Common control (pneumatic) of the right
            Spindle, upper spindle and saw unit.

            feed system
            Motor with mechanical brake, 3 KW
            Mechanical feed infinitely adjustable 5 - 24 m/min.
            Feed roller in front of the 1st lower tool
            pneumatic high-low controlled,
            Durofer toothed rollers (Weinig patent) with
            Depth limiter and self-cleaning
            Adjustment path of the feed rollers opposite left
            Spindle, axial 35 mm
            Extension of the pendulum axle compared to the left ones
            Spindles to 150 mm

            machine electrics
            Operating voltage 380-400-415 volts, 50 Hz.

            Machine stands, tables and stops
            Dressing table 2 m long (incl. jointing ruler)
            Manual Waxilit pump for table resin removal
            A driven rubber roller (sprung in the outfeed table)

            pressure elements and guides
            Pressure shoe in front of the upper spindle with mechanical
            digital display.
            Discharge after the upper spindle with
            mechanical digital display.

            ATS system, automatic 2 axis
            Positioning for spindle #3 and #4
            Min. working height 12 mm

            Electrical height adjustment of the upper spindles
            and the feed

            Central position of lubrication points on the
            machine front

            safety and soundproofing
            Full security fairing
            Easily foldable safety hood with
            Window. Covers the entire workspace
            (feed and spindles) and protects against
            mechanical hazards. When lifting the
            Safety hood become spindles and feed
            switched off automatically.
            An interior light in the safety hood.

            Short parts package 490 mm, program memory 96 programs possible

            Option: Workpiece return with longitudinal and cross conveyor


            Option: planing heads


            (Technical information according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact

          Outside profiling machine

          used  Outside profiling machine WEINIG Univar 6 P


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6827 · Outside profiling machine

          WEINIG - Univar 6 P - - gebraucht -

          Technical details
          Number of boring spindles 3 St.︱Number of tools 1.3/4.1. St.︱Spindle diameter 50,40 mm︱Spindle length 120,320,125 mm︱weight 2500 kg︱loading dimensions L x W x H 3800x1400x2000 mm︱table length 3470 mm︱
          Weinig Univar 6 P In order to sell ---------------------- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body made of heavy, torsion-free and vibration-damping elements. Stops on the right in the profiling area made of Pertinax. Before Profiling spindle a split stop with sliding bar for short parts. Additional opening rail for large format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blow-off device for feed rollers and table. Spindles, hood: Spindles with high concentricity and dynamically balanced. Extraction hoods designed for the cheapest chip flow. Easiest tool change Quick-opening hood lid. Machine operation, setting aids: Operating the machine from the front. Setting the stops for Tool diameter using mechanical number display. Machine electrics, motors, controls: Electrical design according to DIN VDE 0113 - Electrical equipment from Industrial machines EN 60204 IEC 204-1. Further electrical regulations are not taken into account. Engines dynamically balanced. Control of tool positions via selector switch on the control panel. Tools: Machine equipped with operating tools, but without Editing tools. SPINDLE 1 Synchronous spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 120 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10 mm Motor strength: 4 KW (5.5 KW) SPINDLE 2 Number of tools: 4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50mm/35mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Tool diameter max. For zero diameter 112 mm: 210 mm For zero diameter 140 mm: 232 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed: 1.1 KW Feed profiling unit: continuously 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Special equipment: 3 Mechanical spindle brake for synchronous spindle, profiling spindle and Additional aggregates SPINDLE 3 1 fitting milling unit, right: for milling the fitting groove in the Milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch in the control panel. Motor power: 2.2 KW Speed: 6000 rpm Spindle diameter: 40mm Clamping height: 125 mm Tool flight circle: min. 140 mm; max. 180 mm Basic position below table level: 10 mm Motor reinforcement for synchronous spindle from 4 KW to 7.5 KW Motor reinforcement for profiling spindle from 5.5 KW to 11 KW Screen controls for 99 window types. 1 type can hold up to 8 different parts contain. Manufacturing options: individual parts, milling. Data entry via Keyboard with integrated operator guidance and error diagnosis. Free-standing control cabinet --------------------------------- (technical data according to manufacturer - no guarantee!)
            Number of boring spindles 3 St.
            Number of tools 1.3/4.1. St.
            Spindle diameter 50,40 mm
            Spindle length 120,320,125 mm
            weight 2500 kg
            loading dimensions L x W x H 3800x1400x2000 mm
            table length 3470 mm
            Description :
            Weinig Univar 6 P
            In order to sell
            ----------------------
            Operating voltage: 380 volts, 50 periods.

            For milling around windows, doors and similar with uneven edges
            Profiles.

            Arrangement of the aggregates:
            1. Synchronous spindle on the right, pneumatically clocked.
            2. Profiling spindle on the right
            3. Fitting spindle

            Profiling spindle suitable for holding several tools one on top of the other.
            Spindle movement pneumatic.

            The 1 spindle works in synchronization for tear-free milling. Respectively
            This spindle plunges the last 100 mm of a frame end with the
            Insert the appropriate tool into the wood to prevent tearing at the frame
            corners
            avoid.

            Machine stands, tables, stops:
            Machine body made of heavy, torsion-free and vibration-damping
            elements. Stops on the right in the profiling area made of Pertinax. Before
            Profiling spindle a split stop with sliding bar for short parts.
            Additional opening rail for large format frames.

            Feed system:
            Continuous, chainless feed equipped with rubber rollers. Blow-off device
            for feed rollers and table.

            Spindles, hood:
            Spindles with high concentricity and dynamically balanced. Extraction hoods
            designed for the cheapest chip flow. Easiest tool change
            Quick-opening hood lid.

            Machine operation, setting aids:
            Operating the machine from the front. Setting the stops for
            Tool diameter using mechanical number display.

            Machine electrics, motors, controls:
            Electrical design according to DIN VDE 0113 - Electrical equipment from
            Industrial machines EN 60204 IEC 204-1.
            Further electrical regulations are not taken into account.

            Engines dynamically balanced.

            Control of tool positions via selector switch on the control panel.

            Tools:
            Machine equipped with operating tools, but without
            Editing tools.

            SPINDLE 1

            Synchronous spindle
            Number of tools: 1
            Spindle speed: 6000 rpm
            Spindle diameter: 50mm
            Tool clamping length: 120 mm
            Tool diameter max. (milling): 232 mm
            Tool zero flight circle: 112-140 mm
            Basic position under table: 10 mm
            Motor strength: 4 KW (5.5 KW)

            SPINDLE 2

            Number of tools: 4
            Spindle stroke vertical: 3 x 80 mm = 4 tools
            Can be switched to 2 x 95 mm = 3 tools
            Spindle speed: 6000 rpm
            Spindle diameter: 50mm
            Tool clamping length: 320 mm

            Feed profiling unit: 8 m/min
            Feed roller width: 50mm/35mm
            Feed roller diameter: 95 mm
            Stop height: 70 mm
            Working width: min. 30 mm; max. 220 mm
            Working height: min. 30 mm; max. 100mm
            Workpiece length without tenon: min. 245 mm


            Tool diameter max.
            For zero diameter 112 mm: 210 mm
            For zero diameter 140 mm: 232 mm

            Tool diameter max. (milling): 232 mm
            Tool zero flight circle: 112-140 mm
            Basic position under table: 10/5 mm
            Motor strength: Spindle: 11 KW Feed: 1.1 KW
            Feed profiling unit: continuously 6-12 m/min
            Feed roller width: 50 mm
            Feed roller diameter: 95 mm
            Stop height: 70 mm
            Working width: min. 30 mm; max. 220 mm
            Working height: min. 30 mm; max. 100mm
            Workpiece length without tenon: min. 245 mm

            Special equipment:

            3 Mechanical spindle brake for synchronous spindle, profiling spindle and
            Additional aggregates

            SPINDLE 3

            1 fitting milling unit, right: for milling the fitting groove in the
            Milling pass or for grooving in the longitudinal profile.
            Pneumatic horizontal movement with selector switch in the control panel.
            Motor power: 2.2 KW
            Speed: 6000 rpm
            Spindle diameter: 40mm
            Clamping height: 125 mm
            Tool flight circle: min. 140 mm; max. 180 mm
            Basic position below table level: 10 mm

            Motor reinforcement for synchronous spindle from 4 KW to 7.5 KW

            Motor reinforcement for profiling spindle from 5.5 KW to 11 KW

            Screen controls for 99 window types. 1 type can hold up to 8 different parts
            contain. Manufacturing options: individual parts, milling. Data entry via
            Keyboard with integrated operator guidance and error diagnosis.
            Free-standing control cabinet
            ---------------------------------

            (technical data according to manufacturer - no guarantee!)
          Datasheet
          Request / Contact
          used  Outside profiling machine WEINIG Univar 10/3


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2706 · Outside profiling machine

          WEINIG - Univar 10/3 - - gebraucht -

          Technical details
          Number of spindles 4 St.︱Number of tools 11 St.︱Spindle diameter 50,40 mm︱Spindle length 285,125 mm︱length 4000 mm︱width 2000 mm︱height 2200 mm︱
          Weinig Univar 10/3 folding machine --------------------------------- Machine will be cleaned and chcked before delivery For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) -------------------------------------------------- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion 2. Profiling spindle ---------------------- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 3. Profiling spindle ---------------------- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ------------------------------------------------- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. Feed rollers - D : 95 mm Feed roller width 50/30 mm Feed roller spacing 100/120 mm -------------------------------- Screen control with 150 programs. 1 program is each 1 individual part and includes 2 end profiles and 1 longitudinal profile. Pro programs are for end processing 20 different profiles can be selected for Longitudinal machining of 40 different profiles 1 can be selected (in turning mode 2). When manufacturing, e.g. a frame, up to 8 different programs (parts) can be saved. The program memory can be organized so that up to 18 frames or sashes with a maximum of 8 parts each can be stored. Manufacturing options: - Individual parts - Double parts - frame by frame - in series - Milling Data entry via keyboard with integrated Operator guidance and error diagnosis. ---------------------------------- Length: 4000mm (Length of frame milling ruler: 4500 mm) Width: 2000mm Height: 2200mm (Technical information according to the manufacturer, no guarantee!)
            Number of spindles 4 St.
            Number of tools 11 St.
            Spindle diameter 50,40 mm
            Spindle length 285,125 mm
            length 4000 mm
            width 2000 mm
            height 2200 mm
            Description :
            Weinig Univar 10/3 folding machine
            ---------------------------------
            Machine will be cleaned and chcked before delivery

            For milling around windows, doors and the like with uneven
            circumferential profiles. Machine suitable for wood thickness 68 to 92 mm

            Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes.

            The available tool positions are selected using a selector switch on the
            control panel
            retrieved.

            Machine with 3 hydraulically controlled right precision
            Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle
            The spindle stroke takes place in a U-movement, so that the opening is possible
            for short parts
            The milling stop remains as small as possible. Spindle stroke horizontally fine
            Adjustable for both tool positions from the operator side.
            Central lubrication for the spindle units.

            The 1.
            Spindle can be selected in right-left rotation.

            This spindle dips the last 100 mm of each frame end
            appropriate synchronization tool into the passing wood. Through this
            This prevents the tool of the subsequent milling spindle from running in the
            opposite direction
            working, causing tearouts. Excavation of the first 7 transport rollers using
            Footswitch. This shortens the lead time. An additional
            The support rail also allows large-format frames to be milled around.

            Continuous, chainless rubber roller feed with extreme
            short roller spacing. Height adjustment of the feed bar
            electrically readable.

            Electrical version according to VDE.

            Machine including operating tools, but without processing tools
            tools.

            Technical data:

            Working width min. 40 mm
            Working height min. 30 mm, max. 100 mm

            1. Profiling spindle (synchronous and counter-rotation)
            -------------------------------------------------- --
            Motor strength lifting spindle 11.0 kW
            Spindle speed 6000 rpm
            Spindle diameter 50 mm
            Clamping length 285 mm
            Tool zero flight circle 112 - 140 mm
            Max. tool - D : 232 mm
            Spindle stroke vertical 2 x 95 mm for 3 tools
            Basic position under table 10 mm (adjustable up to 20 mm)
            Spindle stroke horizontal 80 mm
            with synchronous automatic immersion

            2. Profiling spindle
            ----------------------
            Motor strength lifting spindle 11.0 kW
            Spindle speed 6000 rpm
            Spindle diameter 50 mm
            Clamping length 285 mm
            Tool zero flight circle 112 - 140 mm
            Max. tool - D : 232 mm
            Spindle stroke vertical 2 x 95 mm for 3 tools
            Basic position under table 10 mm (adjustable up to 20 mm)
            Spindle stroke horizontal 80 mm

            3. Profiling spindle
            ----------------------
            Motor strength lifting spindle 11.0 kW
            Spindle speed 6000 rpm
            Spindle diameter 50 mm
            Clamping length 285 mm
            Tool zero flight circle 112 - 140 mm
            Max. tool - D : 232 mm
            Spindle stroke vertical 2 x 95 mm for 3 tools
            Basic position under table 10 mm (adjustable up to 20 mm)
            Spindle stroke horizontal 80 mm

            4. Profile spindle - fitting unit on the right
            -------------------------------------------------
            For milling the fitting groove in the milling cycle
            or for grooving in the longitudinal profile.
            Pneumatic horizontal movement with
            Selector switch in the control panel.
            Motor 2.2 KW
            Speed 6,000 rpm
            Spindle diameter 40 mm
            Clamping height 125 mm, 2 tools
            Tool flight circle min. 140 mm, max. 180 mm

            Motor power feed 1.1 kW
            Feed speed 6 - 12 m/min.
            Feed rollers - D : 95 mm
            Feed roller width 50/30 mm
            Feed roller spacing 100/120 mm
            --------------------------------

            Screen control with 150 programs. 1 program
            is each 1 individual part and includes 2 end profiles
            and 1 longitudinal profile. Pro programs are for end processing
            20 different profiles can be selected for
            Longitudinal machining of 40 different profiles
            1 can be selected (in turning mode 2).

            When manufacturing, e.g. a frame, up to
            8 different programs (parts) can be saved.

            The program memory can be organized so that up to
            18 frames or sashes with a maximum of 8 parts each can be stored.

            Manufacturing options:
            - Individual parts
            - Double parts
            - frame by frame
            - in series
            - Milling

            Data entry via keyboard with integrated
            Operator guidance and error diagnosis.
            ----------------------------------
            Length: 4000mm
            (Length of frame milling ruler: 4500 mm)
            Width: 2000mm
            Height: 2200mm

            (Technical information according to the manufacturer, no guarantee!)
          Datasheet
          Request / Contact

          Transport system

          used  Transport system WEINIG DEF 25


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2361 · Transport system

          WEINIG - DEF 25 - - gebraucht -

          Technical details
          working length 2000 mm︱Working width 250 mm︱Working height 970 mm︱
          Weinig pressure conveying system DEF 25 to the operator in working height for Unicontrol Length 2000 mm Depth 1800 mm Brand width 250 mm Rear roller conveyor not driven 2500 mm Roll width 250 mm (technical details according to manufacturer - without guarantee.)
            working length 2000 mm
            Working width 250 mm
            Working height 970 mm
            Description :
            Weinig pressure conveying system DEF 25 to the operator in working
            height for Unicontrol

            Length 2000 mm
            Depth 1800 mm
            Brand width 250 mm
            Rear roller conveyor not driven 2500 mm
            Roll width 250 mm

            (technical details according to manufacturer - without guarantee.)
          Datasheet
          Request / Contact

          Window production centre

          used  Window production centre WEINIG Unicontrol 6 NC Spindeln


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2732 · Window production centre

          WEINIG - Unicontrol 6 NC Spindeln - - neuwertig - Weinig, PC-Nexus

          Technical details
          Tenoning spindle 1 0︱Number of milling agregates 5 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus
          # 2732 Weinig Unicontrol 6 with NC spindles ------------------------------------------------ Machine is in checking process at the moment! Technical data summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ------------------------------------------------ > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser directional light to detect the saw section Pos. 2: Rounding unit horizontally at the bottom ------------------------------------------------ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Adjustment path axially mechanically coupled to crosscut saw > Adjustment path radially pneumatically controlled on/off Length stop CNC controlled ------------------------------------------------ > Length 3500 mm > electronic length stop Pos. 3: Tap and slot spindle ------------------------------------------------ > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, CNC > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 4: 1. Profiling spindle (synchronous and counter-rotation) ------------------------------------------------ > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ------------------------------------------------ > Position: vertical right > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, NC > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (area of synchronous spindle), Rung support bar from above in the area of the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontally at the top ------------------------------------------------ > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed 9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment path 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fittings spindle) ------------------------------------------------ > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Pos. 8: Profile milling unit/grooving unit from below ------------------------------------------------ > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 100 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 200 mm Other features ------------------------------------------------ > online capable > Electric feed height adjustment including mechanical digital display and manual feed beam clamping > Folding device for tear-free folding > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Industrial PC, touchscreen with Windows PC control/NEXUS > with Weinig type production program Suction nozzle diameter: ------------------------------------------------ Crosscut saw 80 mm Slotted spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Fitting spindle 120 mm Grooving device from above 80 mm Grooving device from below 80 mm Option: used tools Oertli IV 68/78 wood and wood-aluminium (see warehouse number 6813) The technical characteristics of this machine should meet your expectations do not correspond, please contact us. Our A team with many years of experience will be happy to support you with any adjustments or when looking for a machine that meets your requirements! (technical data according to the manufacturer - no guarantee!)
            Tenoning spindle 1 0
            Number of milling agregates 5 St.
            Spindle diameter 50 mm
            control Weinig, PC-Nexus
            Description :
            # 2732 Weinig Unicontrol 6 with NC spindles
            ------------------------------------------------
            Machine is in checking process at the moment!

            Technical data summary
            (please inquire about any additional accessories included)


            Pos. 1: Crosscut saw
            ------------------------------------------------
            > Number of tools: 1 piece.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3 kW
            > Adjustment path radially pneumatically controlled to 8 positions,
            e.g. for edge rounding from above

            > Laser directional light to detect the saw section

            Pos. 2: Rounding unit horizontally at the bottom
            ------------------------------------------------
            > Position: horizontally below
            > Motor power: 1.5 kW
            > Spindle diameter: 20 mm
            > Clamping length 25 mm
            > Spindle speed: 9000 rpm
            > Tool flight circle max.: 130 mm
            > Adjustment path axially mechanically coupled to crosscut saw
            > Adjustment path radially pneumatically controlled on/off

            Length stop CNC controlled
            ------------------------------------------------
            > Length 3500 mm
            > electronic length stop

            Pos. 3: Tap and slot spindle
            ------------------------------------------------
            > Number of tools: variable, infinitely variable, NC
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, infinitely variable, CNC
            > Spindle speed: 3500 rpm
            > Tool flight circle max. 320 mm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW

            Pos. 4: 1. Profiling spindle (synchronous and counter-rotation)
            ------------------------------------------------
            > Position: vertical right
            > Number of tools: 1 piece.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW

            Pos. 5: 2nd profiling spindle
            ------------------------------------------------
            > Position: vertical right
            > Number of tools: variable, infinitely variable, NC
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, infinitely variable, NC
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW

            2 feed rollers axially pneumatically controlled opposite the spindle, 2
            positions

            Rung guide consisting of:
            Guide ruler in the stop (area of synchronous spindle),
            Rung support bar from above in the area of the profile milling unit vertically
            on the right
            and profiling spindle.


            Pos. 6: Profile milling unit horizontally at the top
            ------------------------------------------------
            > Clamping length: 40 mm
            > Spindle diameter: 40 mm
            > Motor power: 3.0 kW
            > Speed 9,000 rpm
            > Tool flight circle max. 130 mm
            > Axial adjustment range 30 mm, 8 positions
            > Radial adjustment path 125 mm, 8 positions

            Pos. 7: 3rd profiling spindle (fittings spindle)
            ------------------------------------------------
            > Position: vertical right
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm, 8 positions
            > Radial adjustment range 110 mm, 8-fold turret
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 210 mm
            > Motor power: 3.0 kW

            Pos. 8: Profile milling unit/grooving unit from below
            ------------------------------------------------
            > Motor power: 3.0 kW
            > Tool clamping length: 125 mm
            > Axial adjustment range 100 mm, 8 positions
            > Radial adjustment range 100 mm, 8-fold turret
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 200 mm

            Other features
            ------------------------------------------------
            > online capable
            > Electric feed height adjustment including mechanical digital display
            and manual feed beam clamping
            > Folding device for tear-free folding
            > Double parts package
            > Return conveyor for 1-man operation: slat conveyor
            > Screen controls
            > Slanted window device
            > Electronic angle display for sloping windows
            > Industrial PC, touchscreen with Windows PC control/NEXUS
            > with Weinig type production program

            Suction nozzle diameter:
            ------------------------------------------------
            Crosscut saw 80 mm
            Slotted spindle 140 mm
            Profile spindle 1 140 mm
            Profile spindle 2 140 mm
            Fitting spindle 120 mm
            Grooving device from above 80 mm
            Grooving device from below 80 mm

            Option:
            used tools Oertli IV 68/78 wood and wood-aluminium (see warehouse number 6813)



            The technical characteristics of this machine should meet your expectations
            do not correspond, please contact us. Our
            A team with many years of experience will be happy to support you with any
            adjustments or when looking for a machine that meets your requirements!

            (technical data according to the manufacturer - no guarantee!)
          Datasheet
          Request / Contact
          used  Window production centre WEINIG Unicontrol 12 NC


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2711 · Window production centre

          WEINIG - Unicontrol 12 NC - - gebraucht - CNC, Weinig PC-Nexus

          Technical details
          Tenoning spindle 2 St.︱Number of milling agregates 7 St.︱Spindle diameter 50 mm︱Control CNC, Weinig PC-Nexus
          Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .................................................. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .................................................. crosscut saw .................................................. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .................................................. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop .................................................. > Length 4500mm 1. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape .................................................. Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) .................................................. > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm 4. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 5. Profile milling unit (fitting spindle) .................................................. > Position: vertical right > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment range 115 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm 6. Profile milling unit (grooving device from above), in the additional stand .................................................. > Position: working vertically to the right from above > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 100 mm, 8 positions using pneumatic turret > Radial adjustment path 80 mm 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Tool flight circle max.: 180 mm 7. Profiling spindle (grooving device from below, in the additional stand) .................................................. > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment range 100 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm Other features .................................................. > online capable > Folding device for tear-free folding > 2 axially clocked feed rollers opposite profile milling units, for production of narrow, short parts (e.g. glazing bars) > 3 axially clocked feed rollers (2) opposite the profiling spindle 8 positions using pneumatic turret, for spindle 1,2,3 > 3 table tops indexed to the tool diameter (2 positions), profile spindle No. 3 and fitting spindle > 3 rung support rails cycled vertically after the last profiling spindle > Feed height adjustment with NC axis > Divided pressure ruler on the left for wood widths of 40-140 mm > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Control: NEXUS PC control > VARIOplus package for tapping and slotting table, including length stop, CNC-controlled, 4,500 mm timber length, including studio window installation, Swivel angle 75 degrees, horizontal CNC axis, adjustment range 200 mm > Automatic central lubrication > Air conditioning unit in the control cabinet Option: > used window tools OERTLI IV 68, 78 wood and wood-aluminium Should the technical characteristics of this machine not meet your expectations correspond, please contact us. Our longtime experienced team will be happy to support you with any adjustments or with the Find a machine that suits your needs! (Technical information according to the manufacturer - without guarantee!)
            Tenoning spindle 2 St.
            Number of milling agregates 7 St.
            Spindle diameter 50 mm
            Control CNC, Weinig PC-Nexus
            Description :
            Weinig Uncontrol 12
            with radial and axial CNC spindles and VARIO table
            ..................................................
            The machine has already been professionally dismantled and stored in 73447
            Oberkochen

            Specifications summary
            (please inquire about any additional accessories included)
            ..................................................

            crosscut saw
            ..................................................
            > Crosscut saw electronically, horizontally infinitely adjustable
            > Number of tools: 1 pc.
            > Spindle speed: 3000-6000 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3.7 kW
            > Laser guide light for detecting the sawing section
            > Axial adjustment path 150 mm NC axis, electronically stepless
            > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from
            above

            rounding aggregate
            ..................................................
            > Position: horizontally below
            > Axial adjustment path together with the crosscut saw.


            electronic length stop
            ..................................................
            > Length 4500mm

            1. Tap and Slot Spindle
            ..................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment range: 580 mm NC axis, stepless
            > Spindle speed: 2,800-4,000 rpm
            > Tool diameter: 380-400mm
            > Overrun counter, complete clamping length is countered

            2. Tap and Slot Spindle
            ..................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment range: 580 mm NC axis, stepless
            > Spindle speed: 2,800-4,000 rpm
            > Tool diameter: 380-400mm
            > Overrun counter, complete clamping length is countered

            transfer tape
            ..................................................
            Included for transferring the parts to longitudinal processing
            Separation of double parts before entering longitudinal processing.

            1. Profiling spindle (synchronous and counter-rotating)
            ..................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment range 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Minimum tool flight circle: 140 mm
            > Tool flight circle max.: 232 mm


            2. Profiling spindle
            ..................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment range 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Minimum tool flight circle: 140 mm
            > Tool flight circle max.: 232 mm


            3. Profile milling unit (grooving device from above)
            ..................................................
            > Position: horizontally above
            > Motor power: 3.0 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment range 30 mm NC axis, stepless
            > Radial adjustment range 125 mm NC axis, stepless
            > Spindle speed: 9000 rpm
            > Tool flight circle max.: 130 mm

            4. Profiling spindle
            ..................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment range 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Minimum tool flight circle: 140 mm
            > Tool flight circle max.: 232 mm

            5. Profile milling unit (fitting spindle)
            ..................................................
            > Position: vertical right
            > Motor power: 3.0 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm NC axis, stepless
            > Radial adjustment range 100 mm NC axis, stepless
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 210 mm


            6. Profile milling unit (grooving device from above), in the additional stand
            ..................................................
            > Position: working vertically to the right from above
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment path 100 mm, 8 positions using pneumatic turret
            > Radial adjustment path 80 mm 8 positions using pneumatic turret
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 180 mm

            7. Profiling spindle (grooving device from below, in the additional stand)
            ..................................................
            > Position: horizontally below
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 125 mm
            > Axial adjustment range 100 mm NC axis, stepless
            > Radial adjustment range 100 mm NC axis, stepless
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 200 mm

            Other features
            ..................................................

            > online capable
            > Folding device for tear-free folding
            > 2 axially clocked feed rollers opposite profile milling units, for production
            of narrow, short parts (e.g. glazing bars)
            > 3 axially clocked feed rollers (2) opposite the profiling spindle
            8 positions using pneumatic turret, for spindle 1,2,3
            > 3 table tops indexed to the tool diameter (2 positions), profile spindle
            No. 3 and fitting spindle
            > 3 rung support rails cycled vertically after the last profiling spindle
            > Feed height adjustment with NC axis
            > Divided pressure ruler on the left for wood widths of 40-140 mm
            > Double parts package
            > Return conveyor device for 1-man operation: slat conveyor
            > Screen controls
            > Pitched window installation
            > electronic angle display for sloping windows
            > Control: NEXUS PC control
            > VARIOplus package for tapping and slotting table, including length stop,
            CNC-controlled, 4,500 mm timber length, including studio window installation,
            Swivel angle 75 degrees, horizontal CNC axis, adjustment range 200 mm
            > Automatic central lubrication
            > Air conditioning unit in the control cabinet

            Option:
            > used window tools OERTLI IV 68, 78 wood and wood-aluminium

            Should the technical characteristics of this machine not meet your expectations
            correspond, please contact us. Our longtime
            experienced team will be happy to support you with any adjustments or with the
            Find a machine that suits your needs!

            (Technical information according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used  Window production centre WEINIG Unicontrol 6 NC Spindeln


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6830 · Window production centre

          WEINIG - Unicontrol 6 NC Spindeln - - gebraucht -

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱
          Weinig Unicontrol 6 with NC spindles ----------------------------------- Technical data summary (please inquire about any additional accessories included) ................................... Generally ----------------------------------- > Loading dimensions: 7000 x 2400 x 2400 mm > Machine weight, approx.: 3700 kg crosscut saw ----------------------------------- > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Laser directional light to detect the saw section Electronically safe length stop ----------------------------------- > Length 3600 mm 1. Tap and slot spindle ---------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle (synchronous and counter-rotation) ----------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle ----------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ------------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Tool clamping length: 160 mm > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3 kW 4. Grooving device clocked horizontally + vertically at the top ------------------------------------- > Number of tools: 2 pieces. > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 130 mm > Motor power: 3 kW Other features ------------------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor system for 1-man operation > Screen controls > Slanted window device > Electronic angle display for sloping windows: > Control: PC control Nexus, CNC > Option: > Tools IV 68 Oertli > Tools IV 78 Leitz > Tools IV 92 Leitz If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! ----------------------------------- (technical information according to the manufacturer - no guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            Description :
            Weinig Unicontrol 6 with NC spindles
            -----------------------------------

            Technical data summary
            (please inquire about any additional accessories included)
            ...................................

            Generally
            -----------------------------------
            > Loading dimensions: 7000 x 2400 x 2400 mm
            > Machine weight, approx.: 3700 kg

            crosscut saw
            -----------------------------------
            > Electronic crosscut saw, horizontally infinitely adjustable
            > Number of tools: 1 piece.
            > Spindle speed: 2800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3 kW
            > Laser directional light to detect the saw section

            Electronically safe length stop
            -----------------------------------
            > Length 3600 mm


            1. Tap and slot spindle
            ----------------------------------
            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Spindle stroke vertical adjustment continuously
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW

            1. Profiling spindle (synchronous and counter-rotation)
            -----------------------------------
            > Position: vertical right
            > Number of tools: 1 piece.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW

            2. Profiling spindle
            -----------------------------------
            > Position: vertical right
            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Spindle stroke vertical adjustment continuously
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW
            3. Profiling spindle (fittings spindle)
            -------------------------------------
            > Position: vertical right
            > Number of tools: 3 pieces.
            > Tool clamping length: 160 mm
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 210 mm
            > Motor power: 3 kW

            4. Grooving device clocked horizontally + vertically at the top
            -------------------------------------
            > Number of tools: 2 pieces.
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 130 mm
            > Motor power: 3 kW

            Other features
            -------------------------------------
            > online capable
            > Folding device for tear-free folding
            > Double parts package
            > Return conveyor system for 1-man operation
            > Screen controls
            > Slanted window device
            > Electronic angle display for sloping windows:
            > Control: PC control Nexus, CNC
            > Option:
            > Tools IV 68 Oertli
            > Tools IV 78 Leitz
            > Tools IV 92 Leitz

            If the technical characteristics of this machine do not meet your expectations
            correspond, please contact us. Our long-standing
            Our experienced team will be happy to support you with any adjustments or
            Find a machine that meets your needs!
            -----------------------------------
            (technical information according to the manufacturer - no guarantee!)

          Datasheet
          Request / Contact
          used  Window production centre WEINIG Unicontrol 6


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2725 · Window production centre

          WEINIG - Unicontrol 6 - - gebraucht - Südtron BT 20

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱control Südtron BT 20
          Weinig Unicontrol 6 --------------------------------- General data --------------------------------- Loading dimensions approx. 5000x2400x2400 Machine weight approx. 3000 kg crosscut saw --------------------------------- > Pneumatic crosscut saw, against 8-fold turret stop > Spindle speed: 2800 > Spindle diameter: 40 mm > Tool diameter max.: 350 mm > Motor power: 3 kW > Laser directional light to detect the saw section Length stop - clocked --------------------------------- > Length stop 2700 mm 1. Tap and slot spindle --------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle - synchronous spindle (synchronous and counter-rotation) ---------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle --------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ---------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Spindle speed: 6000 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 180 mm > Motor power: 3 kW > Clamping length 150 mm > Horizontal: 2 positions > Vertical: 3 positions 4. Glass bead saw pneumatically up and down ---------------------------------- > Motor 3 kW Other features ---------------------------------- > Folding device for tear-free folding > Double parts package > Screen control 99 programs Sütron BT20 > Slanted window device > Electronic angle display for sloping windows > Return roller conveyor with push-off device > CE mark (technical data according to the manufacturer - no guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            control Südtron BT 20
            Description :
            Weinig Unicontrol 6
            ---------------------------------

            General data
            ---------------------------------

            Loading dimensions approx. 5000x2400x2400
            Machine weight approx. 3000 kg

            crosscut saw
            ---------------------------------

            > Pneumatic crosscut saw, against 8-fold turret stop
            > Spindle speed: 2800
            > Spindle diameter: 40 mm
            > Tool diameter max.: 350 mm
            > Motor power: 3 kW
            > Laser directional light to detect the saw section

            Length stop - clocked
            ---------------------------------
            > Length stop 2700 mm

            1. Tap and slot spindle
            ---------------------------------

            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW

            1. Profiling spindle - synchronous spindle (synchronous and counter-rotation)
            ----------------------------------

            > Position: vertical right
            > Number of tools: 1 piece.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW

            2. Profiling spindle
            ---------------------------------

            > Position: vertical right
            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW

            3. Profiling spindle (fittings spindle)
            ----------------------------------

            > Position: vertical right
            > Number of tools: 3 pieces.
            > Spindle speed: 6000 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 180 mm
            > Motor power: 3 kW
            > Clamping length 150 mm
            > Horizontal: 2 positions
            > Vertical: 3 positions

            4. Glass bead saw pneumatically up and down
            ----------------------------------
            > Motor 3 kW

            Other features
            ----------------------------------

            > Folding device for tear-free folding
            > Double parts package
            > Screen control 99 programs Sütron BT20
            > Slanted window device
            > Electronic angle display for sloping windows
            > Return roller conveyor with push-off device
            > CE mark

            (technical data according to the manufacturer - no guarantee!)
          9.500 €
          Datasheet
          Request / Contact
          used  Window production centre WEINIG Unicontrol 6 NC Spindeln


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2654 · Window production centre

          WEINIG - Unicontrol 6 NC Spindeln - - gebraucht - Weinig, PC-Nexus

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus
          #2654 Weinig Unicontrol 6 with NC spindles ------------------------------------------------------ Machine is checked, ready for demonstration Specifications summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ---------------------------- > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.0 kW > Laser guide light for detecting the sawing section electronic length stop, mounted on slotted table included Positioning of the cross-cut saw integrated in the control. > Length 3500mm Pos. 2: tapping and slotted spindle ---------------------------- > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (synchronous spindle) ---------------------------- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ---------------------------- > Position: vertical right > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler at the stop (synchronous spindle area), Rung support strip from above in the area of ??the profile milling unit, vertically on the right and profiling spindle. Pos. 5: Profile milling unit horizontally above ---------------------------- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool cutting circle max. 130 mm > Axial adjustment range 30 mm, 2 positions > Radial adjustment range 125 mm, 8 positions Item 6: 3rd profiling spindle (fitting spindle) ---------------------------- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment path 100 mm, 8 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Other features ---------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Industrial PC, PC control/NEXUS > Weinig type production program If the technical characteristics of this machine do not meet your expectations please contact us. Our experienced team will be happy to support you with any adjustments or looking for an alternative machine that meets your requirements! (technical data according to the manufacturer - without guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            control Weinig, PC-Nexus
            Description :
            #2654 Weinig Unicontrol 6 with NC spindles
            ------------------------------------------------------
            Machine is checked, ready for demonstration

            Specifications summary
            (please inquire about any additional accessories included)


            Pos. 1: Crosscut saw
            ----------------------------
            > Crosscut saw electronically, horizontally infinitely adjustable
            > Number of tools: 1 pc.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3.0 kW
            > Laser guide light for detecting the sawing section

            electronic length stop, mounted on slotted table included
            Positioning of the cross-cut saw integrated in the control.
            > Length 3500mm

            Pos. 2: tapping and slotted spindle
            ----------------------------
            > Number of tools: variable, infinitely variable NC axis adjustment
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW


            Pos. 3: 1st profiling spindle (synchronous spindle)
            ----------------------------
            > Position: vertical right
            > Number of tools: 1 pc.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW


            Pos. 4: 2nd profiling spindle
            ----------------------------
            > Position: vertical right
            > Number of tools: variable, infinitely variable NC axis adjustment
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW

            2 feed rollers opposite the spindle axially pneumatically controlled, 2
            positions

            Rung guide consisting of:
            Guide ruler at the stop (synchronous spindle area),
            Rung support strip from above in the area of ??the profile milling unit,
            vertically on the right
            and profiling spindle.


            Pos. 5: Profile milling unit horizontally above
            ----------------------------
            > Clamping length: 40 mm
            > Spindle diameter: 40 mm
            > Motor power: 3.0 kW
            > Speed ??5,850 rpm
            > Tool cutting circle max. 130 mm
            > Axial adjustment range 30 mm, 2 positions
            > Radial adjustment range 125 mm, 8 positions


            Item 6: 3rd profiling spindle (fitting spindle)
            ----------------------------
            > Position: vertical right
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm, 8 positions
            > Radial adjustment path 100 mm, 8 positions
            > Spindle speed: 5,850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 210 mm
            > Motor power: 3.0 kW

            Other features
            ----------------------------
            > online capable
            > Folding device for tear-free folding
            > Double parts package
            > Return conveyor device for 1-man operation: slat conveyor
            > Screen controls
            > Pitched window installation
            > electronic angle display for sloping windows
            > Industrial PC, PC control/NEXUS
            > Weinig type production program

            If the technical characteristics of this machine do not meet your expectations
            please contact us. Our experienced team will be happy to support you with any
            adjustments or looking for an alternative machine that meets your requirements!

            (technical data according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used  Window production centre WEINIG Unicontrol 12 NC


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2728 · Window production centre

          WEINIG - Unicontrol 12 NC - - gebraucht - Weinig, PC-Nexus

          Technical details
          Tenoning spindle 2 St.︱Number of milling agregates 7 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus
          Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ................................................ Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ................................................ crosscut saw ................................................ > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ................................................ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ................................................ > Length 4500 mm 1. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ................................................ Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 3. Profile milling unit (grooving device from above) ................................................ > Position: horizontal at the top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 30 mm NC axis, infinitely variable > Radial adjustment path 125 mm NC axis, infinitely variable > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 4. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Rung support bar clocked vertically after the last profiling spindle 5. Profile milling unit (fittings spindle) ................................................ > Position: vertical right > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment path 115 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 6. Profile milling unit (grooving device from above), in the additional stand ................................................ > Position: working vertically to the right from above > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 44 mm, 8 positions using a pneumatic turret > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 9,000 rpm > Tool flight circle max.: 130 mm 7. Profiling spindle (grooving device from below, in the additional stand) ................................................ > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment path 100 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions Other features ................................................ > online capable > Folding device for tear-free folding > Milling carriage for milling sashes with frame widths under 500 mm. Automatic pneumatic clamping > 9 feed rollers controlled up/down after the last profiling spindle faster and shorter milling process > Feed height adjustment with NC axis > Divided pressure ruler on the left, pneumatic, divided for wood widths 40-140 mm > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Control: NEXUS PC control > Vario table with horizontal NC axis > Automatic central lubrication > Air conditioning unit in the control cabinet > Machine without processing tools If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! (Technical information according to the manufacturer - no guarantee!)
            Tenoning spindle 2 St.
            Number of milling agregates 7 St.
            Spindle diameter 50 mm
            control Weinig, PC-Nexus
            Description :
            Weinig Unicontrol 12
            with radial and axial CNC spindles as well as VARIO table and milling carriage
            ................................................
            Machine dismantled professionally and in our warehouse in 73447 Oberkochen.
            Video and pictures were taken before dismantling.

            Technical data summary
            (please inquire about any additional accessories included)
            ................................................

            crosscut saw
            ................................................
            > Electronic crosscut saw, horizontally infinitely adjustable
            > Number of tools: 1 piece.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3.7 kW
            > Laser directional light to detect the saw section
            > Axial adjustment path 150 mm NC axis, electronically infinitely variable
            > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above

            Rounding aggregate
            ................................................
            > Position: horizontally below
            > Motor power: 1.5 kW
            > Spindle diameter: 20 mm
            > Tool clamping length: 25 mm
            > Spindle speed: 9,000 rpm
            > Tool diameter: max. 130 mm
            > Axial adjustment path mechanically coupled with crosscut saw.
            > Radial adjustment pneumatically controlled on/off

            electronic length stop
            ................................................
            > Length 4500 mm

            1. Tap and slot spindle
            ................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment path: 580 mm NC axis, continuously variable
            > Spindle speed: 2,800 rpm
            > Tool diameter: max. 400 mm
            > Overtravel counter, complete clamping length is countered

            2. Tap and slot spindle
            ................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment path: 580 mm NC axis, continuously variable
            > Spindle speed: 2,800rpm
            > Tool diameter: max. 400 mm
            > Overtravel counter, complete clamping length is countered

            Transfer tape
            ................................................
            Included for transferring the parts to longitudinal machining
            Separation of double parts before the start of longitudinal processing.

            1. Profiling spindle (synchronous and counter-rotation)
            ................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 2 feed rollers axially pneumatically controlled opposite the spindle,
            8 positions
            > Table top pneumatically controlled to the tool diameter


            2. Profiling spindle
            ................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 2 feed rollers axially pneumatically controlled opposite the spindle,
            8 positions
            > Table top pneumatically controlled to the tool diameter


            3. Profile milling unit (grooving device from above)
            ................................................
            > Position: horizontal at the top
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment path 30 mm NC axis, infinitely variable
            > Radial adjustment path 125 mm NC axis, infinitely variable
            > Spindle speed: 9000 rpm
            > Tool flight circle max.: 130 mm
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 1 feed roller axially pneumatically controlled opposite the spindle,
            2 positions

            4. Profiling spindle
            ................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 2 feed rollers axially pneumatically controlled opposite the spindle,
            8 positions
            > Rung support bar clocked vertically after the last profiling spindle

            5. Profile milling unit (fittings spindle)
            ................................................
            > Position: vertical right
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 160 mm
            > Axial adjustment path 115 mm NC axis, infinitely variable
            > Radial adjustment path 100 mm NC axis, infinitely variable
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 210 mm
            > 1 feed roller axially pneumatically controlled opposite the spindle,
            2 positions


            6. Profile milling unit (grooving device from above), in the additional stand
            ................................................
            > Position: working vertically to the right from above
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment range 44 mm, 8 positions using a pneumatic turret
            > Radial adjustment path 100 mm NC axis, infinitely variable
            > Spindle speed: 9,000 rpm
            > Tool flight circle max.: 130 mm

            7. Profiling spindle (grooving device from below, in the additional stand)
            ................................................
            > Position: horizontally below
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 125 mm
            > Axial adjustment path 100 mm NC axis, infinitely variable
            > Radial adjustment path 100 mm NC axis, infinitely variable
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 200 mm
            > 1 feed roller axially pneumatically controlled opposite the spindle,
            2 positions


            Other features
            ................................................

            > online capable
            > Folding device for tear-free folding
            > Milling carriage for milling sashes with frame widths under 500 mm.
            Automatic pneumatic clamping
            > 9 feed rollers controlled up/down after the last profiling spindle
            faster and shorter milling process
            > Feed height adjustment with NC axis
            > Divided pressure ruler on the left, pneumatic, divided for wood widths 40-140
            mm
            > Double parts package
            > Return conveyor for 1-man operation: slat conveyor
            > Screen controls
            > Slanted window device
            > Electronic angle display for sloping windows
            > Control: NEXUS PC control
            > Vario table with horizontal NC axis
            > Automatic central lubrication
            > Air conditioning unit in the control cabinet
            > Machine without processing tools


            If the technical characteristics of this machine do not meet your expectations
            correspond, please contact us. Our long-standing
            Our experienced team will be happy to support you with any adjustments or
            Find a machine that meets your needs!

            (Technical information according to the manufacturer - no guarantee!)
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil du commerçant : Engelfried Maschinentechnik GmbH

          Contacter le commerçant



            Engelfried Maschinentechnik GmbH
           Elisabethenstr. 41
            Agence-street-marketing aalen.73432
            Allemagne
            (0049)07361-98660">(0049)07361-98660
            (0049)07361-986640
            info@engelfried.com
            www.engelfried.com

          Profil de commerçant

          Société Gebrüder Engelfried oHG
          Elisabethenstrasse 41
          73432 Aalen-Unterkochen
          Allemagne
           Tél. + 49 (7361) 9866-0 Werner et Florian Engelfried
           Tél. + 49 (7361) 9866-0 Florian Engelfried
           Kom. 0602392773 Marian Grzeszkiewicz
           Teel.: + 49 (7361) 9866-19 Кирилл Суппес

          Fax.: + 49 (7361) 8431 
          (At) engelfried.com

          Exposition et entrepôt: 
          centre industriel 
          Chemin de la chapelle 25 
          73447 Oberkochen
          Allemagne 
          Tél. + 49 (7364) 919323




          Engelfried Maschinentechnik GmbH   73432 - Aalen Elisabethenstr. 41 Deutschland
          Engelfried Maschinentechnik GmbH

          Elisabethenstr. 41



          Contact Trader


            Engelfried Maschinentechnik GmbH
           Elisabethenstr. 41
            73432 - Aalen
            Deutschland
            (0049)07361-98660
            (0049)07361-986640
            info@engelfried.com
            www.engelfried.com
            Contact person:

           





          Machine category


          Abrichthobelmaschine · Band- und Profilschleifmaschine · Bandsäge · Beschlagcenter · Bohr- und Dübeleintreibmaschine · Breitbandschleifmaschine · Clipsetzer fuer Holz-Alufenster · CNC-Bearbeitungszentrum · CNC-Bearbeitungszentrum Fenster u. Türen · Dickenhobelmaschine · Doppelgehrungssäge · Dreh- und Kipptisch · Ecklager- und Olivenbohrmaschine · Entstauber · Fensteranlage · Fensterlackieranlage · Fensterwerkzeuge · Formatkreissäge · Fräsmaschine · Furnierklebegerät · Furnierpresse · Füge- und Feinschnittmaschine · Glasleistensäge · Kantenschleifmaschine · Kapp- und Gehrungssäge · Keilzinkenanlage · Klammergeräte · Kombinierte Abricht- und Dickenhobelmasc · Kommissionswagen · Kompressor · Kreuzsprossenfräse · Lamellierpresse · Leimauftragsmaschine · Leimgerät · Längskreissäge · Längsschnittkreissäge · Minizinkenpresse · Montagestation · Olivenbohrmaschine · Optimierungskappsäge · Plattensägen vertikal · Profilwagen · Rahmen- und Langlochbohrmaschine · Rahmenpresse · Rollenbahn · Rundbogenfräsgeräte · Schleifmaschine · Schwenkfräsmaschine · Transportanlage · Transportwagen · Umfälzautomat · Universal-Dübellochbohrmaschine · Untertischkappsäge · Verglasungs- und Kontrollpresse · Verleimstern · Vierseitenhobelmaschine · Werkstückrückführung · Werkzeug-Reinigungsgeräte · Zapfenschneid- und Schlitzmaschine · Zerspanen ·