,
Réseau européen de revendeurs de machines de stockage
+49 (0) 2389 5299080
Service de recherche Vendre des machines d'occasion

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:
             Vue: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          WMT GmbH & Co.KG - Stockist for used machines

          Machinelist:

          Bench Drilling Machine

          used Bench Drilling Machine MAXION ECOMAX 14

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76110 · Bench Drilling Machine

          MAXION - ECOMAX 14 - - neu -

          Technical details
          bore capacity in steel (diameter) 14 /15 mm︱throat 180 mm︱bore stroke 70 mm︱turning speeds 420 - 2100 U/min︱ 250 x 220 mm︱distance drilling head - clamping area max. 380 mm︱total power requirement 0,5/1,0 / 400 kW / Volt︱column diameter 65 mm︱tool taper MK 2 ︱weight of the machine ca. 0,08 t︱dimensions 0,4 x 0,5 x 0,9 m︱
          Table Drilling Machine with: variable feed Tapping function. depth display Coolant system Belt-drive spindle protection machine light
            bore capacity in steel (diameter. 14 /15 mm
            throat 180 mm
            bore stroke 70 mm
            turning speeds 420 - 2100 U/min
            250 x 220 mm
            distance drilling head - clampin. max. 380 mm
            total power requirement 0,5/1,0 / 400 kW / Volt
            column diameter 65 mm
            tool taper MK 2
            weight of the machine ca. 0,08 t
            dimensions 0,4 x 0,5 x 0,9 m
            Description :
            Table Drilling Machine with:
            variable feed
            Tapping function.
            depth display
            Coolant system
            Belt-drive
            spindle protection
            machine light
          Datasheet
          Request / Contact
          used Bench Drilling Machine MAXION UNIMAX 1 Frequenz

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76111 · Bench Drilling Machine

          MAXION - UNIMAX 1 Frequenz - - neu -

          Technical details
          bore capacity in steel (diameter) 15 / 18 mm︱throat 180 mm︱bore stroke 80 mm︱turning speeds 200 - 4000 U/min︱ 250 x 220 mm︱distance drilling head - clamping area max. 380 mm︱total power requirement 1,1 / 400 kW / Volt︱column diameter 65 mm︱tool taper MK 2 ︱weight of the machine ca. 0,08 t︱dimensions 0,4 x 0,5 x 0,9 m︱
          Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection
            bore capacity in steel (diameter. 15 / 18 mm
            throat 180 mm
            bore stroke 80 mm
            turning speeds 200 - 4000 U/min
            250 x 220 mm
            distance drilling head - clampin. max. 380 mm
            total power requirement 1,1 / 400 kW / Volt
            column diameter 65 mm
            tool taper MK 2
            weight of the machine ca. 0,08 t
            dimensions 0,4 x 0,5 x 0,9 m
            Description :
            Precise table drill:
            - high accuracy and quality
            - Drill table adjustable via rack and swiveling around the column
            - Full engine protection
            - Star grip
            - 230 volt mains connection
          Datasheet
          Request / Contact
          used Bench Drilling Machine MAXION UNIMAX 1 TAP

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76112 · Bench Drilling Machine

          MAXION - UNIMAX 1 TAP - - neu -

          Technical details
          bore capacity in steel (diameter) 15 / 18 mm︱throat 180 mm︱bore stroke 80 mm︱turning speeds 200 - 4000 U/min︱ 250 x 220 mm︱distance drilling head - clamping area max. 380 mm︱total power requirement 1,1 / 400 kW / Volt︱column diameter 65 mm︱tool taper MK 2 ︱weight of the machine ca. 0,08 t︱dimensions 0,4 x 0,5 x 0,9 m︱
          precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection
            bore capacity in steel (diameter. 15 / 18 mm
            throat 180 mm
            bore stroke 80 mm
            turning speeds 200 - 4000 U/min
            250 x 220 mm
            distance drilling head - clampin. max. 380 mm
            total power requirement 1,1 / 400 kW / Volt
            column diameter 65 mm
            tool taper MK 2
            weight of the machine ca. 0,08 t
            dimensions 0,4 x 0,5 x 0,9 m
            Description :
            precise bench drill:
            - Large speed range
            - Programmable thread cutting
            - high accuracy and quality
            - Drill table adjustable via rack and swiveling around the column
            - Full engine protection
            - Star grip
            - 230 volt mains connection
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used Pillar Drilling Machine MAXION UNIMAX 3 TAP

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76210 · Pillar Drilling Machine

          MAXION - UNIMAX 3 TAP - - -NEU- -

          Technical details
          bore capacity in steel 30 mm︱threading cutting capacity: M20 ︱throat 260 mm︱bore stroke 125 mm︱spindle taper MK 3 ︱feed range - spindle 0 mm/U︱spindle turning speed range 80 - 1440 / 180 -3200 U/min︱transmission ratio 2 Stufen︱column diameter 110 mm︱table surface area 500 x 365 mm︱total power requirement 0,8 / 1,4 kW︱weight of the machine ca. 0,27 t︱dimensions of the machine ca. 0,4 x 1,2 x 1,9 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark
            bore capacity in steel 30 mm
            threading cutting capacity: M20
            throat 260 mm
            bore stroke 125 mm
            spindle taper MK 3
            spindle turning speed range 80 - 1440 / 180 -3200 U/min
            transmission ratio 2 Stufen
            column diameter 110 mm
            table surface area 500 x 365 mm
            total power requirement 0,8 / 1,4 kW
            weight of the machine ca. 0,27 t
            dimensions of the machine ca. 0,4 x 1,2 x 1,9 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark
          Datasheet
          Request / Contact
          used Pillar Drilling Machine MAXION UNIMAX 3

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76212 · Pillar Drilling Machine

          MAXION - UNIMAX 3 - - -NEU- -

          Technical details
          bore capacity in steel 30 mm︱threading cutting capacity: M20 ︱throat 260 mm︱bore stroke 125 mm︱spindle taper MK 3 ︱spindle turning speed range 80 - 1440 / 180 -3200 U/min︱transmission ratio 2 Stufen︱column diameter 110 mm︱table surface area 500 x 365 mm︱total power requirement 0,8 / 1,4 kW︱weight of the machine ca. 0,27 t︱dimensions of the machine ca. 0,4 x 1,2 x 1,9 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark
            bore capacity in steel 30 mm
            threading cutting capacity: M20
            throat 260 mm
            bore stroke 125 mm
            spindle taper MK 3
            spindle turning speed range 80 - 1440 / 180 -3200 U/min
            transmission ratio 2 Stufen
            column diameter 110 mm
            table surface area 500 x 365 mm
            total power requirement 0,8 / 1,4 kW
            weight of the machine ca. 0,27 t
            dimensions of the machine ca. 0,4 x 1,2 x 1,9 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark
          Datasheet
          Request / Contact
          used Pillar Drilling Machine MAXION UNIMAX 4 Basic

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76214 · Pillar Drilling Machine

          MAXION - UNIMAX 4 Basic - - -NEU- -

          Technical details
          bore capacity in steel 40 mm︱threading cutting capacity: M30 ︱throat 310 mm︱bore stroke 175 mm︱spindle taper MK 4 ︱feed range - spindle 20 - 400 mm/U︱spindle turning speed range 60 - 1250 / 120 -2500 U/min︱transmission ratio 2 Stufen︱column diameter 120 mm︱table surface area 550 x 400 mm︱total power requirement 1,5 / 3,0 kW︱weight of the machine ca. 0,45 t︱dimensions of the machine ca. 0,7 x 1,4 x 2,0 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark
            bore capacity in steel 40 mm
            threading cutting capacity: M30
            throat 310 mm
            bore stroke 175 mm
            spindle taper MK 4
            feed range - spindle 20 - 400 mm/U
            spindle turning speed range 60 - 1250 / 120 -2500 U/min
            transmission ratio 2 Stufen
            column diameter 120 mm
            table surface area 550 x 400 mm
            total power requirement 1,5 / 3,0 kW
            weight of the machine ca. 0,45 t
            dimensions of the machine ca. 0,7 x 1,4 x 2,0 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark
          Datasheet
          Request / Contact
          used Pillar Drilling Machine MAXION UNIMAX 3 AV

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76211 · Pillar Drilling Machine

          MAXION - UNIMAX 3 AV - - -NEU- -

          Technical details
          bore capacity in steel 30 mm︱threading cutting capacity: M20 ︱throat 260 mm︱bore stroke 125 mm︱spindle taper MK 3 ︱feed range - spindle 30 - 400 mm/U︱spindle turning speed range 80 - 1440 / 180 -3200 U/min︱transmission ratio 2 Stufen︱column diameter 110 mm︱table surface area 500 x 365 mm︱total power requirement 0,8 / 1,4 kW︱weight of the machine ca. 0,27 t︱dimensions of the machine ca. 0,4 x 1,2 x 1,9 m︱
          Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark
            bore capacity in steel 30 mm
            threading cutting capacity: M20
            throat 260 mm
            bore stroke 125 mm
            spindle taper MK 3
            feed range - spindle 30 - 400 mm/U
            spindle turning speed range 80 - 1440 / 180 -3200 U/min
            transmission ratio 2 Stufen
            column diameter 110 mm
            table surface area 500 x 365 mm
            total power requirement 0,8 / 1,4 kW
            weight of the machine ca. 0,27 t
            dimensions of the machine ca. 0,4 x 1,2 x 1,9 m
            Description :
            Equipment:
            - Gears made of hardened and ground steel
            - Front speed selector lever
            - Gear lubrication by automatic oil pump
            - Integrated coolant device
            - Machine lamp
            - Rotatable and tiltable table
            - Automatic feed with electromagnetic clutch
            - Handwheel for manual fine feed
            - automatic tool ejector
            - Integrated electrical controls in the drill head
            - Pushbutton for EMERGENCY STOP
            - Switch for right / left rotation
            - Height-adjustable chip protection hood with microswitch
            - CE mark
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil du commerçant: WMT GmbH & Co.kg

          Contacter le commerçant



            WMT GmbH & Co.kg
           Siemens route 1
            46342 - Velen Ramsdorf
            Deutschland
            + 49 2863 92477-47 "> + 49 2863 92477-47
            +49 2863 92477-50
            info@wmt.de
            www.wmt.de

          Profil de commerçant

          Bienvenue sur les machines-outils WMT

          Achat et vente de machines-outils neuves et usagées.
          Vente de matériel d'atelier
          Achat de machines-outils d'occasion
          Traitement des résolutions d'exploitation
          Médiation d'installations complètes de production

          Commerce de machines-outils de tout genre. Vous cherchez une machine d'occasion? Venez nous rendre visite…

          Scie à ruban en aluminium Scie à ruban automatique - Scie à ruban automatique - Scie à ruban horizontale - Scie à ruban verticale - Scie à ruban horizontale Fraiseuse mobile à banc fixe - Rectifieuse à courroie universelle Perceuse de table Perceuse de table - Perceuse à tour central Tour automatique à banc incliné à froid Scie circulaire pour le perçage et le fraisage M / C Machine à rouler les brides et à coller les machines de traitement des plats et des tôles Plieuse Plieuse Presse à main Tour à grande charge Perceuse radiale à grande vitesse Hydr. Pressbrake Tour de presse hydraulique - commande par cycle Entailleuse de perforation Presse de perçage de piliers Machine à cintrer les tubes Cisaillement de plaques - Cisaillement de plaques hydraulique - Mécanique Presse pneumatique Pneumatique Perceuse radiale Perceuse radiale Systèmes de rails / systèmes d'arrêt Rouleuse cintreuse de rouleaux - Table de soudage rotative 3 Rolls Machine à affûter les lames de scie Section de cisaillement - Machine combinée pour le travail de la tôle Tour à table coulissante Presse à redresser - Rectifieuse double colonne Type de table Machine à aléser et à fraiser Presse à couder à fileter - Meuleuse d'outils à une seule colonne - Préréglage universel d'outils Machine de fraisage de salle d'outils - Universal Tryout Press - Hydraulique Machine universelle de tournage de navires Soudage Aspiration de fumée Table de soudage Équipement de table de soudage Support de roue Armoires à tiroirs Transpalettes électriques Transpalettes électriques à la main Armoires à outils Chariots à outils Système de rayonnage à bacs à fourches Chariot élévateur à fourches pour conteneur - Électricité Table élévatrice Charge aimant Sablage Plaque de traverselle de machine Mandrin de serrage Mandrin de serrage Table de serrage Table de déplacement / déplacement Table frontale Lynette Table rotative Étau

          WMT GmbH & Co.KG

          Siemens route 1

          46342 Velen-Ramsdorf
          FON: + 49 2863 92477-47
          FAX: + 49 2863 92477 50
          E-mail: info@wmt.de



          WMT GmbH & Co.kg 46342 - Velen-Ramsdorf Siemensstraße 1 Deutschland
          WMT GmbH & Co.kg

          Siemensstraße 1



          Contact Trader


            WMT GmbH & Co.kg
           Siemensstraße 1
            46342 - Velen-Ramsdorf
            Deutschland
            +49 2863 92477-47
            +49 2863 92477-50
            info@w-m-t.de
            www.w-m-t.de
            Contact person:
           

          Trader Profile



          Machine category


          Abkantpresse - hydraulisch · Abricht- und Dickenhobel · Alu-Kreissäge · Aufspanntisch · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsäge mobil · Bandsägeautomat - Horizontal · Behälterdrehvorrichtung · Bettfräsmaschine - Vertikal · Biegemaschine horizontal · Blechbearbeitungsanlagen · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Bohrerschleifmaschine · Bügelmesschraube · Bügelsäge · Bügelsäge - Automatisch · Bürstenentgrater · Doppel-Gehrungsäge · Doppelschleifbock · Drehmaschine - zyklengesteuert · Drehmeißel/Drehstahl · Einständerpresse - Hydraulisch · Flachschleifmaschine · Flachstahl- / Plattenbearbeitung · Fräsmaschine - Horizontal · Fräsmaschine - Universal · Gabelhubwagen - Elektro · Gabelhubwagen Elektro · Gabelhubwagen Hand · Gabelstapler Diesel · Gabelstapler Elektro · Gabelstapler Gas · Generatoren · Gewindebohrmaschine · Gewindeschneidmaschine · Gleitschleifanlage · Handhebelpresse · Handwerkzeuge · Hubtische · Kaltkreissäge · Kaltkreissäge - Automatik · Kapp- und Gehrungssäge · Kniehebelpresse - Einständer · Kombi-Schleifmaschine · Kompressoren · Krananlagen · Kreissäge · Kreuztisch · Kühlmittelanlage · Langgutregale · Lasthebemagnete · Leit- und Zugspindeldrehmaschine · Lochstanze - Einständer · Magnetbohrmaschine · Magnetspannplatte · Maschinen Untergestell · Maschinenleuchten · Messerschleifmaschine · Plasmaschneidegerät · Pneumatische Presse · Polierbock · Profil- Ring- Biegemaschine · Profilstahlschere - Kombiniert · Punktschweißmaschine · Regalsysteme · Reinigungssysteme · Richtpresse - Doppelständer · Rohrausschleifer · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Räumnadeln · Schnellradiale - Bohrmaschine · Schraubenkompressor · Schraubstock · Schubladenschränke · Schweißanlage · Schweißdrehtisch · Schweißdrehtisch - rund · Schweißkantenabschrägmaschine · Schweißrauchabsaugung · Schweißtisch · Schweißtisch-Zubehör · Schweißzubehör · Schwenkbiegemaschine · Schwerlastanhänger · Sicken- und Bördelmaschine · Sonstige Fördertechnik · Sonstiges · Strahlanlage · Stähleschleifmaschine · Ständerbohrmaschine · Sägeblattschärfmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tischbohrmaschine · Tischbohrwerk · Tischdrehbank · Trowalisiermaschine · Unterstellbock · Wasserpumpe · Werkbänke · Werkstattpressen - hydraulisch · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeugschränke · Werkzeugwagen ·
          Compendium
          Logiciels
          Contenu des machines d'occasion
          Confidentialité
          Suivez-nous
          © 2000-2024, Logotech oHG · Logiciels et services Internet - Tous droits réservés