,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          WMT GmbH & Co.KG - Stockist for used machines

          Machinelist:


          Bench Lathe

          used  Bench Lathe KAMI DKM 250V.550


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78007 · Bench Lathe

          KAMI - DKM 250V.550 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 20 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 60 mm︱metric threading 0,4 - 3,0 mm︱thread - inch 10 - 44 TPI︱thread - module 0,2 - 12,5 mm︱connected load frequency 230 V︱total power requirement 1,0 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,09 x 0,59 x 0,45 m︱
          Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 20 mm
            tailstock quill taper MT 2
            tailstock quill stroke 60 mm
            metric threading 0,4 - 3,0 mm
            thread - inch 10 - 44 TPI
            thread - module 0,2 - 12,5 mm
            connected load frequency 230 V
            total power requirement 1,0 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,09 x 0,59 x 0,45 m
            Description :
            Equipped with
            - 20 mm spindle passage
            - adjustable guideways
            - Powerful 1.0 kW motor
            - continuously variable speed
            Scope of delivery:
            - 3-jaw chuck 100 mm,
            - 4-jaw faceplate chuck 125mm
            - standing and rotating bezel
            - Splash guard
            - Feed protection
          Datasheet
          Request / Contact
          used  Bench Lathe KAMI DKM 250L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78001 · Bench Lathe

          KAMI - DKM 250L - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 27 mm spindle clearance
            - adjustable guideways
            - Powerful motor with 0.75 kW
            - High resolution of the axis spindles for exact positioning
            - Danger!! without digital display
            Scope of delivery:
            3-jaw chuck 100 mm, change gear set, splash guard.

            On request also with 230 volt connection
          Datasheet
          Request / Contact
          used  Bench Lathe KAMI DKM 250L-1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78000 · Bench Lathe

          KAMI - DKM 250L-1 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 2-axis digital measuring system with position indicator
            - manufactured according to DIN 8606
            - 27 mm spindle passage
            - adjustable guideways "by adjustable strips"
            - Strong engine with 0.75 kW
            - High resolution of the axis spindles for exact positioning

            Delivery:
            3-jaw chuck 100 mm, change gear set, splash guard 3-axis
            digital measuring system fully assembled.
          Datasheet
          Request / Contact

          Center Lathe

          used  Center Lathe KAMI DKM 330


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78054 · Center Lathe

          KAMI - DKM 330 - - -neu- -

          Technical details
          turning diameter over bed 330 mm︱turning diameter over slide rest 210 mm︱turning length 635 mm︱turning diameter in the gap 480 mm︱turning speeds 58 - 2500 U/min︱centre height 167 mm︱spindle bore 40 mm︱tailstock quill taper MT 3 MK︱total power requirement 2,2 kW︱weight of the machine ca. 0,8 t︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 330 mm
            turning diameter over slide rest 210 mm
            turning length 635 mm
            turning diameter in the gap 480 mm
            turning speeds 58 - 2500 U/min
            centre height 167 mm
            spindle bore 40 mm
            tailstock quill taper MT 3 MK
            total power requirement 2,2 kW
            weight of the machine ca. 0,8 t
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 660 S


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78060 · Center Lathe

          KAMI - DKM 660 S - - -neu- -

          Technical details
          turning diameter over bed 660 mm︱turning diameter over slide rest 420 mm︱turning length 1500 mm︱turning diameter in the gap 840 mm︱turning speeds 36 - 1600 U/min︱centre height 330 mm︱spindle bore 103 mm︱tailstock quill taper MT 5 MK︱tailstock travel 150 mm︱tailstock quill diameter 75 mm︱total power requirement 11 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 3,6 x 1,1 x 1,45 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 660 mm
            turning diameter over slide rest 420 mm
            turning length 1500 mm
            turning diameter in the gap 840 mm
            turning speeds 36 - 1600 U/min
            centre height 330 mm
            spindle bore 103 mm
            tailstock quill taper MT 5 MK
            tailstock travel 150 mm
            tailstock quill diameter 75 mm
            total power requirement 11 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 3,6 x 1,1 x 1,45 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 420-N


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78055 · Center Lathe

          KAMI - DKM 420-N - - -neu- -

          Technical details
          turning diameter over bed 420 mm︱turning diameter over slide rest 250 mm︱turning length 1000 mm︱turning diameter in the gap 580 mm︱turning speeds 45 - 1800 U/min︱centre height 210 mm︱spindle bore 52 mm︱tailstock quill taper MT 4 MK︱total power requirement 4,4 kW︱weight of the machine ca. 1,5 t︱dimensions 1,95 x 0,85 x 1,35 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 420 mm
            turning diameter over slide rest 250 mm
            turning length 1000 mm
            turning diameter in the gap 580 mm
            turning speeds 45 - 1800 U/min
            centre height 210 mm
            spindle bore 52 mm
            tailstock quill taper MT 4 MK
            total power requirement 4,4 kW
            weight of the machine ca. 1,5 t
            dimensions 1,95 x 0,85 x 1,35 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 410S x 750


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78064 · Center Lathe

          KAMI - DKM 410S x 750 - - -neu- -

          Technical details
          turning diameter over bed 410 mm︱turning diameter over slide rest 240 mm︱turning length 750 mm︱turning diameter in the gap mm︱turning speeds 32 - 2000 U/min︱centre height 210 mm︱spindle bore 52 mm︱tailstock quill taper MT 3 MK︱total power requirement 2,2 kW︱weight of the machine ca. 0,8 t︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 410 mm
            turning diameter over slide rest 240 mm
            turning length 750 mm
            turning speeds 32 - 2000 U/min
            centre height 210 mm
            spindle bore 52 mm
            tailstock quill taper MT 3 MK
            total power requirement 2,2 kW
            weight of the machine ca. 0,8 t
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 410L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78052 · Center Lathe

          KAMI - DKM 410L - - -neu- -

          Technical details
          turning diameter over bed 410 mm︱turning diameter over slide rest 240 mm︱turning length 1000 mm︱turning diameter in the gap 530 mm︱turning speeds 65 - 1810 U/min︱centre height 205 mm︱spindle bore 52 mm︱tailstock quill taper MT 4 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 1,9 x 0,8 x 1,3 m︱
          Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.
            turning diameter over bed 410 mm
            turning diameter over slide rest 240 mm
            turning length 1000 mm
            turning diameter in the gap 530 mm
            turning speeds 65 - 1810 U/min
            centre height 205 mm
            spindle bore 52 mm
            tailstock quill taper MT 4
            total power requirement 2,2 kW
            weight of the machine ca. 0,9 t
            dimensions of the machine ca. 1,9 x 0,8 x 1,3 m
            Description :
            Center lathe with:
            3-axis digital measuring system fully assembled
            electromagnetic main spindle brake
            auto. Feed in longitudinal and transverse direction
            safety relay
            Micrometer end stop
            coolant device
            3-jaw lathe chuck with 1 set of turning and drilling jaws
            German operating instructions.
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 420


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78053 · Center Lathe

          KAMI - DKM 420 - - -neu- -

          Technical details
          turning diameter over bed 420 mm︱turning diameter over slide rest 250 mm︱turning length 1000 mm︱turning diameter in the gap 580 mm︱turning speeds 45 - 1800 U/min︱centre height 210 mm︱spindle bore 52 mm︱tailstock quill taper MT 4 ︱total power requirement 4,4 kW︱weight of the machine ca. 1,6 t︱dimensions of the machine ca. 1,94 x 0,85 x 1,32 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 420 mm
            turning diameter over slide rest 250 mm
            turning length 1000 mm
            turning diameter in the gap 580 mm
            turning speeds 45 - 1800 U/min
            centre height 210 mm
            spindle bore 52 mm
            tailstock quill taper MT 4
            total power requirement 4,4 kW
            weight of the machine ca. 1,6 t
            dimensions of the machine ca. 1,94 x 0,85 x 1,32 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 460


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78056 · Center Lathe

          KAMI - DKM 460 - - -neu- -

          Technical details
          turning diameter over bed 460 mm︱turning diameter over slide rest 290 mm︱turning length 1000 mm︱turning diameter in the gap 700 mm︱turning speeds 25 - 1800 U/min︱centre height 230 mm︱spindle bore 80 mm︱tailstock quill taper MT 5 MK︱total power requirement 5,5 kW︱weight of the machine ca. 2,35 t︱dimensions of the machine ca. 2,31 x 1,0 x 1,25 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 460 mm
            turning diameter over slide rest 290 mm
            turning length 1000 mm
            turning diameter in the gap 700 mm
            turning speeds 25 - 1800 U/min
            centre height 230 mm
            spindle bore 80 mm
            tailstock quill taper MT 5 MK
            total power requirement 5,5 kW
            weight of the machine ca. 2,35 t
            dimensions of the machine ca. 2,31 x 1,0 x 1,25 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 332-1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78050 · Center Lathe

          KAMI - DKM 332-1 - - -neu- -

          Technical details
          turning diameter over bed 330 mm︱turning diameter over slide rest 178 mm︱turning length 1000 mm︱turning diameter in the gap 450 mm︱turning speeds 70 - 2000 U/min︱centre height 165 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 ︱total power requirement 1,1 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 1,9 x 0,72 x 1,4 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 330 mm
            turning diameter over slide rest 178 mm
            turning length 1000 mm
            turning diameter in the gap 450 mm
            turning speeds 70 - 2000 U/min
            centre height 165 mm
            spindle bore 38 mm
            tailstock quill taper MT 3
            total power requirement 1,1 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 1,9 x 0,72 x 1,4 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 500 S


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78059 · Center Lathe

          KAMI - DKM 500 S - - -neu- -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 300 mm︱turning length 1500 mm︱turning diameter in the gap 710 mm︱turning speeds 36 - 1600 U/min︱centre height 250 mm︱spindle bore 103 mm︱tailstock quill taper MT 5 MK︱tailstock travel 150 mm︱tailstock quill diameter 75 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3,15 t︱dimensions of the machine ca. 3,65 x 1,0 x 1,3 m︱
          Highlights - Large 103mm spindle bore - High cutting performance, optimum cutting results - Electromechanical spindle brake - Sophisticated gear design for transmitting the engine power in high Torques and strong cutting forces - Tuned, stiff construction for the absorption of large cutting forces - Tailstock construction with large radius for the machining of long waves - Feed operation via one-hand lever technology with rapid traverse function Delivery: 3-jaw chuck 315 mm, 4-jaw face chuck 400 mm, 1 piece running bezel, 1 piece standing bezel, 120-250 mm passage.
            turning diameter over bed 500 mm
            turning diameter over slide rest 300 mm
            turning length 1500 mm
            turning diameter in the gap 710 mm
            turning speeds 36 - 1600 U/min
            centre height 250 mm
            spindle bore 103 mm
            tailstock quill taper MT 5 MK
            tailstock travel 150 mm
            tailstock quill diameter 75 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3,15 t
            dimensions of the machine ca. 3,65 x 1,0 x 1,3 m
            Description :
            Highlights
            - Large 103mm spindle bore
            - High cutting performance, optimum cutting results
            - Electromechanical spindle brake
            - Sophisticated gear design for transmitting the engine power in high
            Torques and strong cutting forces
            - Tuned, stiff construction for the absorption of large cutting forces
            - Tailstock construction with large radius for the machining of long waves
            - Feed operation via one-hand lever technology with rapid traverse function
            Delivery:
            3-jaw chuck 315 mm, 4-jaw face chuck 400 mm, 1 piece
            running bezel, 1 piece standing bezel, 120-250 mm passage.
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 360-1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78051 · Center Lathe

          KAMI - DKM 360-1 - - -

          Technical details
          turning diameter over bed 360 mm︱turning diameter over slide rest 220 mm︱turning length 1000 mm︱turning diameter in the gap 506 mm︱turning speeds 45 - 1800 U/min︱centre height 180 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 ︱total power requirement 2,4 kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 1,9 x 0,8 x 1,2 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 360 mm
            turning diameter over slide rest 220 mm
            turning length 1000 mm
            turning diameter in the gap 506 mm
            turning speeds 45 - 1800 U/min
            centre height 180 mm
            spindle bore 38 mm
            tailstock quill taper MT 3
            total power requirement 2,4 kW
            weight of the machine ca. 0,9 t
            dimensions of the machine ca. 1,9 x 0,8 x 1,2 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 500 S


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78058 · Center Lathe

          KAMI - DKM 500 S - - -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 300 mm︱turning length 1000 mm︱turning diameter in the gap 710 mm︱turning speeds 36 - 1600 U/min︱centre height 250 mm︱spindle bore 103 mm︱tailstock quill taper MT 5 MK︱tailstock travel 150 mm︱tailstock quill diameter 75 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2,75 t︱dimensions of the machine ca. 2,5 x 1,1 x 1,4 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 500 mm
            turning diameter over slide rest 300 mm
            turning length 1000 mm
            turning diameter in the gap 710 mm
            turning speeds 36 - 1600 U/min
            centre height 250 mm
            spindle bore 103 mm
            tailstock quill taper MT 5 MK
            tailstock travel 150 mm
            tailstock quill diameter 75 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2,75 t
            dimensions of the machine ca. 2,5 x 1,1 x 1,4 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used  Center Lathe KAMI DKM 560.2


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78057 · Center Lathe

          KAMI - DKM 560.2 - - -

          Technical details
          turning diameter over bed 560 mm︱turning diameter over slide rest 355 mm︱turning length 2000 mm︱turning diameter in the gap 790 mm︱turning speeds 20 - 1800 U/min︱centre height 380 mm︱spindle bore 80 mm︱tailstock quill taper MT 2,8 MK︱tailstock travel 150 mm︱tailstock quill diameter 75 mm︱total power requirement 5,5 kW︱weight of the machine ca. 3,4 t︱dimensions of the machine ca. 3,5 x 1,15 x 1,3 m︱
          • 80 mm spindle passage • Gears hardened and ground • manual central lubrication • adjustable main spindle bearings • Overload clutch in the lock case • bed bridge • incl. 3 - axis digital display
            turning diameter over bed 560 mm
            turning diameter over slide rest 355 mm
            turning length 2000 mm
            turning diameter in the gap 790 mm
            turning speeds 20 - 1800 U/min
            centre height 380 mm
            spindle bore 80 mm
            tailstock quill taper MT 2,8 MK
            tailstock travel 150 mm
            tailstock quill diameter 75 mm
            total power requirement 5,5 kW
            weight of the machine ca. 3,4 t
            dimensions of the machine ca. 3,5 x 1,15 x 1,3 m
            Description :
            • 80 mm spindle passage
            • Gears hardened and ground
            • manual central lubrication
            • adjustable main spindle bearings
            • Overload clutch in the lock case
            • bed bridge
            • incl. 3 - axis digital display
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled KAMI DKM 630 / 2000 ZS


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78100 · Lathe - cycle-controlled

          KAMI - DKM 630 / 2000 ZS - - -neu- -

          Technical details
          turning diameter over bed 630 mm︱turning diameter over slide rest 360 mm︱turning length 2000 mm︱turning speeds 20 - 1120 U/min︱centre height 315 mm︱spindle bore 105 mm︱tailstock quill taper MT 5 MK︱tailstock travel 250 mm︱tailstock quill diameter 100 mm︱travel -x axis 370 mm︱travel -z axis 1370 mm︱rapid traverse X-axis 6000 mm/min︱rapid traverse Z-axis 7000 mm/min︱bed width 560 mm︱total power requirement 11 kW︱weight of the machine ca. 5,1 t︱dimensions of the machine ca. 4,5 x 1,6 x 1,85 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 630 mm
            turning diameter over slide rest 360 mm
            turning length 2000 mm
            turning speeds 20 - 1120 U/min
            centre height 315 mm
            spindle bore 105 mm
            tailstock quill taper MT 5 MK
            tailstock travel 250 mm
            tailstock quill diameter 100 mm
            travel -x axis 370 mm
            travel -z axis 1370 mm
            rapid traverse X-axis 6000 mm/min
            rapid traverse Z-axis 7000 mm/min
            bed width 560 mm
            total power requirement 11 kW
            weight of the machine ca. 5,1 t
            dimensions of the machine ca. 4,5 x 1,6 x 1,85 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used  Bench Drilling Machine KAMI BKM 5025


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76130 · Bench Drilling Machine

          KAMI - BKM 5025 - - neu -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 240 mm︱bore stroke 110 mm︱turning speeds 125 - 2850 U/min︱ 310 x 320 mm︱distance drilling head - clamping area max. 650 mm︱total power requirement 0,75 / 400 kW / Volt︱weight of the machine ca. 0,175 t︱dimensions 0,95x0,8x1,75 inkl. Tisch m︱
            bore capacity in steel (diameter. 25 mm
            throat 240 mm
            bore stroke 110 mm
            turning speeds 125 - 2850 U/min
            310 x 320 mm
            distance drilling head - clampin. max. 650 mm
            total power requirement 0,75 / 400 kW / Volt
            weight of the machine ca. 0,175 t
            dimensions 0,95x0,8x1,75 inkl. Tisch m
            Description :

          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used  Drilling and Milling M/C KAMI FKM 350-1 PD / SK40


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76005 · Drilling and Milling M/C

          KAMI - FKM 350-1 PD / SK40 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 290 mm︱bore stroke 130 mm︱spindle taper SK 40 ︱spindle turning speed range 75 - 3200 U/min︱ 500 mm︱ 230 mm︱table surface area 720 x 210 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱total power requirement 1,1 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 1,1 x 0,9 x 1,2 m︱
          domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.
            bore capacity in steel (diameter. 40 mm
            throat 290 mm
            bore stroke 130 mm
            spindle taper SK 40
            spindle turning speed range 75 - 3200 U/min
            500 mm
            230 mm
            table surface area 720 x 210 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            total power requirement 1,1 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 1,1 x 0,9 x 1,2 m
            Description :
            domestic equipments
            • Digital display
            • Digital depth gauge for quill
            • Adjustable guides with wedges
            • Large 12-speed range from 75 to 3200 rpm
            • Smooth running due to hardened and ground gears running in an oil bath •
            • Right-left rotation
            • Prismatic guides in all axes
            • Gear head can be swiveled 90 °
            • Chip protection with safety circuit

            Machine base optional.
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C KAMI BKM 4040


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76021 · Drilling and Milling M/C

          KAMI - BKM 4040 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 290 mm︱bore stroke 115 mm︱spindle taper SK 40 ︱spindle turning speed range 70 - 3200 U/min︱ 350 mm︱ 130 mm︱table surface area 590 x 190 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱feed 0,1 - 0,18 - 0,26 mm/U︱total power requirement 1,1 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 0,7 x 0,95 x 1,75 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 40 mm
            throat 290 mm
            bore stroke 115 mm
            spindle taper SK 40
            spindle turning speed range 70 - 3200 U/min
            350 mm
            130 mm
            table surface area 590 x 190 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            feed 0,1 - 0,18 - 0,26 mm/U
            total power requirement 1,1 kW
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 0,7 x 0,95 x 1,75 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C KAMI FKM 349 V


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76008 · Drilling and Milling M/C

          KAMI - FKM 349 V - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 185 mm︱bore stroke 50 mm︱spindle taper MK 3 ︱spindle turning speed range 50 - 2500 U/min︱ 178 mm︱ 480 mm︱table surface area 700 x 180 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 160 t︱dimensions of the machine ca. 0,75 x 0,8 x 0,9 m︱
          domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.
            bore capacity in steel (diameter. 25 mm
            throat 185 mm
            bore stroke 50 mm
            spindle taper MK 3
            spindle turning speed range 50 - 2500 U/min
            178 mm
            480 mm
            table surface area 700 x 180 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 160 t
            dimensions of the machine ca. 0,75 x 0,8 x 0,9 m
            Description :
            domestic equipments
            • Digital depth gauge
            • Adjustable guides with wedges
            • Large 12-speed range from 75 to 3200 rpm
            • Smooth running due to hardened and ground gears running in an oil bath •
            • Right-left rotation
            • Prismatic guides in all axes
            • Gear head can be swiveled 90 °
            • Chip protection with safety circuit

            Machine base optional.
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C KAMI FKM 650A


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76002 · Drilling and Milling M/C

          KAMI - FKM 650A - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 360 mm︱bore stroke 150 mm︱spindle turning speed range 120 - 3000 U/min︱spindle taper SK 40650 mm︱ 320 mm︱vertical adjustment 500 mm︱table surface area 1000 x 300 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱total power requirement 2,2 kW︱weight of the machine ca. 0,85 t︱dimensions of the machine ca. 1,25 x 1.5 x 2,3 m︱
          New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system
            bore capacity in steel (diameter. 50 mm
            throat 360 mm
            bore stroke 150 mm
            spindle turning speed range 120 - 3000 U/min
            spindle taper SK 40
            650 mm
            320 mm
            vertical adjustment 500 mm
            table surface area 1000 x 300 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            total power requirement 2,2 kW
            weight of the machine ca. 0,85 t
            dimensions of the machine ca. 1,25 x 1.5 x 2,3 m
            Description :
            New Model Industrial Drilling and Milling Machine with Manual Transmission and
            High Speed Range. The prism guide in the Z-axis ensures a high degree of
            precision even in the most difficult milling jobs.

            Domestic equipments:
            • automatic feed in X-axis
            • 3-axis digital display
            • motorized Z-axis
            • Feed in quill
            • Left-right-run high
            • tapping attachment
            • Gear head swiveling
            • Coolant system
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C KAMI FKM 350 PD / SK40


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76004 · Drilling and Milling M/C

          KAMI - FKM 350 PD / SK40 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 290 mm︱bore stroke 130 mm︱spindle taper SK 40 ︱spindle turning speed range 70 - 3200 U/min︱ 520 mm︱ 230 mm︱table surface area 730 x 210 mm︱connected load frequency 400 V︱total power requirement 1,1/1,5 kW︱weight of the machine ca. 0,32 t︱dimensions of the machine ca. 1,1 x 0,9 x 1,15 m︱
          domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.
            bore capacity in steel (diameter. 40 mm
            throat 290 mm
            bore stroke 130 mm
            spindle taper SK 40
            spindle turning speed range 70 - 3200 U/min
            520 mm
            230 mm
            table surface area 730 x 210 mm
            connected load frequency 400 V
            total power requirement 1,1/1,5 kW
            weight of the machine ca. 0,32 t
            dimensions of the machine ca. 1,1 x 0,9 x 1,15 m
            Description :
            domestic equipments
            • Digital depth gauge
            • Adjustable guides with wedges
            • Large 12-speed range from 75 to 3200 rpm
            • Smooth running due to hardened and ground gears running in an oil bath •
            • Right-left rotation
            • Prismatic guides in all axes
            • Gear head can be swiveled 90 °
            • Chip protection with safety circuit

            Machine base optional.
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine KAMI BKM 5032


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76231 · Pillar Drilling Machine

          KAMI - BKM 5032 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 320 mm︱bore stroke 155 mm︱spindle taper MT 4 MK︱table: 500 x 420 mm︱column diameter 120 mm︱turning speeds 125 - 3030 U/min︱feeds 0,1 - 0,2 - 0,3 mm/U︱total power requirement 1,2 kW︱weight of the machine ca. 540 kg.︱range L-W-H 0,8 x 0,55 x 2,2 mm︱
          • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment
            bore capacity in steel (diameter. 32 mm
            throat 320 mm
            bore stroke 155 mm
            spindle taper MT 4 MK
            table: 500 x 420 mm
            column diameter 120 mm
            turning speeds 125 - 3030 U/min
            feeds 0,1 - 0,2 - 0,3 mm/U
            total power requirement 1,2 kW
            weight of the machine ca. 540 kg.
            range L-W-H 0,8 x 0,55 x 2,2 mm
            Description :
            • machine base for clamping high workpieces
            • Digital Depth Gauge
            • Gearbox swivels 180 °
            • silent running through geärtete, ground oil-cooled gears
            • Tapping Function
            • electromagnetic clutch for drill feed
            • automatic feed
            • electric drive for table height adjustment
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine KAMI BKM 3035VS


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76234 · Pillar Drilling Machine

          KAMI - BKM 3035VS - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 320 mm︱bore stroke 160 mm︱spindle taper MT 4 MK︱table: 500 x 420 mm︱column diameter 120 mm︱turning speeds 85 - 1800 U/min︱feeds 0,1 - 0,2 - 0,3 mm/U︱total power requirement 0,85 / 1,5 kW︱weight of the machine ca. 500 kg.︱range L-W-H 965 x 515 x 1920 mm︱
            bore capacity in steel (diameter. 32 mm
            throat 320 mm
            bore stroke 160 mm
            spindle taper MT 4 MK
            table: 500 x 420 mm
            column diameter 120 mm
            turning speeds 85 - 1800 U/min
            feeds 0,1 - 0,2 - 0,3 mm/U
            total power requirement 0,85 / 1,5 kW
            weight of the machine ca. 500 kg.
            range L-W-H 965 x 515 x 1920 mm
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Profil du commerçant: WMT GmbH & Co.kg

          Contacter le commerçant



            WMT GmbH & Co.kg
           Siemens route 1
            46342 - Velen Ramsdorf
            Allemagne
            + 49 2863 92477-47 "> + 49 2863 92477-47
            +49 2863 92477-50
            info@wmt.de
            www.wmt.de

          Profil de commerçant

          Bienvenue sur les machines-outils WMT

          Achat et vente de machines-outils neuves et usagées.
          Vente de matériel d'atelier
          Achat de machines-outils d'occasion
          Traitement des résolutions d'exploitation
          Médiation d'installations complètes de production

          Commerce de machines-outils de tout genre. Vous cherchez une machine d'occasion? Venez nous rendre visite…

          Scie à ruban en aluminium Scie à ruban automatique - Scie à ruban automatique - Scie à ruban horizontale - Scie à ruban verticale - Scie à ruban horizontale Fraiseuse mobile à banc fixe - Rectifieuse à courroie universelle Perceuse de table Perceuse de table - Perceuse à tour central Tour automatique à banc incliné à froid Scie circulaire pour le perçage et le fraisage M / C Machine à rouler les brides et à coller les machines de traitement des plats et des tôles Plieuse Plieuse Presse à main Tour à grande charge Perceuse radiale à grande vitesse Hydr. Pressbrake Tour de presse hydraulique - commande par cycle Entailleuse de perforation Presse de perçage de piliers Machine à cintrer les tubes Cisaillement de plaques - Cisaillement de plaques hydraulique - Mécanique Presse pneumatique Pneumatique Perceuse radiale Perceuse radiale Systèmes de rails / systèmes d'arrêt Rouleuse cintreuse de rouleaux - Table de soudage rotative 3 Rolls Machine à affûter les lames de scie Section de cisaillement - Machine combinée pour le travail de la tôle Tour à table coulissante Presse à redresser - Rectifieuse double colonne Type de table Machine à aléser et à fraiser Presse à couder à fileter - Meuleuse d'outils à une seule colonne - Préréglage universel d'outils Machine de fraisage de salle d'outils - Universal Tryout Press - Hydraulique Machine universelle de tournage de navires Soudage Aspiration de fumée Table de soudage Équipement de table de soudage Support de roue Armoires à tiroirs Transpalettes électriques Transpalettes électriques à la main Armoires à outils Chariots à outils Système de rayonnage à bacs à fourches Chariot élévateur à fourches pour conteneur - Électricité Table élévatrice Charge aimant Sablage Plaque de traverselle de machine Mandrin de serrage Mandrin de serrage Table de serrage Table de déplacement / déplacement Table frontale Lynette Table rotative Étau

          WMT GmbH & Co.KG

          Siemens route 1

          46342 Velen-Ramsdorf
          FON: + 49 2863 92477-47
          FAX: + 49 2863 92477 50
          E-mail: info@wmt.de




          WMT GmbH  &  Co.kg   46342 - Velen-Ramsdorf Siemensstraße 1 Deutschland
          WMT GmbH & Co.kg

          Siemensstraße 1



          Contact Trader


            WMT GmbH & Co.kg
           Siemensstraße 1
            46342 - Velen-Ramsdorf
            Deutschland
            +49 2863 92477-47
            +49 2863 92477-50
            info@w-m-t.de
            www.w-m-t.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abricht- und Dickenhobel · Alu-Kreissäge · Aufspanntisch · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsäge mobil · Bandsägeautomat - Horizontal · Behälterdrehvorrichtung · Bettfräsmaschine - Vertikal · Biegemaschine horizontal · Blechbearbeitungsanlagen · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Bohrerschleifmaschine · Bügelmesschraube · Bügelsäge · Bügelsäge - Automatisch · Bürstenentgrater · Doppel-Gehrungsäge · Doppelschleifbock · Drehmaschine - zyklengesteuert · Drehmeißel/Drehstahl · Einständerpresse - Hydraulisch · Flachschleifmaschine · Flachstahl- / Plattenbearbeitung · Fräsmaschine - Universal · Gabelhubwagen - Elektro · Gabelhubwagen Elektro · Gabelhubwagen Hand · Gabelstapler Diesel · Gabelstapler Elektro · Gabelstapler Gas · Generatoren · Gewindebohrmaschine · Gewindeschneidmaschine · Gleitschleifanlage · Handhebelpresse · Handwerkzeuge · Hubtische · Kaltkreissäge · Kaltkreissäge - Automatik · Kapp- und Gehrungssäge · Kniehebelpresse - Einständer · Kombi-Schleifmaschine · Kompressoren · Krananlagen · Kreissäge · Kreuztisch · Kühlmittelanlage · Langgutregale · Lasthebemagnete · Leit- und Zugspindeldrehmaschine · Magnetbohrmaschine · Magnetspannplatte · Maschinen Untergestell · Maschinenleuchten · Messerschleifmaschine · Plasmaschneidegerät · Pneumatische Presse · Polierbock · Profil- Ring- Biegemaschine · Profilstahlschere - Kombiniert · Punktschweißmaschine · Regalsysteme · Reinigungssysteme · Richtpresse - Doppelständer · Rohrausschleifer · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Räumnadeln · Schnellradiale - Bohrmaschine · Schraubenkompressor · Schraubstock · Schubladenschränke · Schweißanlage · Schweißdrehtisch · Schweißdrehtisch - rund · Schweißrauchabsaugung · Schweißtisch · Schweißtisch-Zubehör · Schweißzubehör · Schwenkbiegemaschine · Schwerlastanhänger · Sicken- und Bördelmaschine · Sonstige Fördertechnik · Sonstiges · Strahlanlage · Ständerbohrmaschine · Sägeblattschärfmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tischbohrmaschine · Tischbohrwerk · Tischdrehbank · Trowalisiermaschine · Unterstellbock · Wasserpumpe · Werkbänke · Werkstattpressen - hydraulisch · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeugschränke · Werkzeugwagen ·