,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          WMT GmbH & Co.KG - Stockist for used machines

          Machinelist:


          Bench Lathe

          used  Bench Lathe HBM 250 x 550 Norton Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78003 · Bench Lathe

          HBM - 250 x 550 Norton Profi - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 125 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 1,25 x 0,6 x 0,6 m︱
          Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 125 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,135 t
            dimensions of the machine ca. 1,25 x 0,6 x 0,6 m
            Description :
            Speed in 6 levels 125 - 2000rpm.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm. (Independent)
            Fixed bezel.
            Revolving bezel.
            4-fold steel holder.
            chip tray.
            back panel.
            spindle protection.
            Hardened bed rails.
            Longitudinal feed with left / right switching.
            Set of change gears.
            Associated Tools.
          Datasheet
          Request / Contact
          used  Bench Lathe HBM 250 x 550 Profi Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78002 · Bench Lathe

          HBM - 250 x 550 Profi Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,3 x 0,6 x 0,65 m︱
          Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,3 x 0,6 x 0,65 m
            Description :
            Benchtop lathe with base cabinet
            3-axis LCD digital display system fully assembled.
            Longitudinal feed.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm.
            Clamping plate.
            4-way steel holder.
            Clock for thread cutting.
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Forage protection
            Set of wheels.
            Appropriate tools.
          Datasheet
          Request / Contact
          used  Bench Lathe HBM 290 x 750


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78006 · Bench Lathe

          HBM - 290 x 750 - - -neu- -

          Technical details
          turning diameter over bed 290 mm︱turning diameter over slide rest 170 mm︱turning length 750 mm︱turning speeds 75 - 2000 U/min︱centre height 145 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱tailstock quill stroke 80 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,34 t︱dimensions of the machine ca. 1,3 x 0,75 x 0,7 m︱
          2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.
            turning diameter over bed 290 mm
            turning diameter over slide rest 170 mm
            turning length 750 mm
            turning speeds 75 - 2000 U/min
            centre height 145 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            tailstock quill stroke 80 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,34 t
            dimensions of the machine ca. 1,3 x 0,75 x 0,7 m
            Description :
            2-axis LCD digital display system (now new).
            Longitudinal and transverse feed.
            3-jaw chuck 160 mm.
            4-jaw chuck 160 mm.
            faceplate
            4-way steel holder with 4 pcs tool holders
            2 pcs. bezels
            Machine light
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Feed protection
            Set of wheels.
            Machine tools.
          Datasheet
          Request / Contact

          Center Lathe

          used  Center Lathe HBM 400 x 1000 DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78066 · Center Lathe

          HBM - 400 x 1000 DRO - - -

          Technical details
          turning diameter over bed 400 mm︱turning diameter over slide rest 264 mm︱turning length 1000 mm︱turning diameter in the gap 550 mm︱turning speeds 44 - 2000 U/min︱centre height 200 mm︱spindle bore 52 mm︱tailstock quill taper MT 4 MK︱connected load frequency 400 V︱total power requirement 1,5 / 2,4 kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 1,9 x 0,8 x 1,56 m︱
          3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools
            turning diameter over bed 400 mm
            turning diameter over slide rest 264 mm
            turning length 1000 mm
            turning diameter in the gap 550 mm
            turning speeds 44 - 2000 U/min
            centre height 200 mm
            spindle bore 52 mm
            tailstock quill taper MT 4 MK
            connected load frequency 400 V
            total power requirement 1,5 / 2,4 kW
            weight of the machine ca. 0,9 t
            dimensions of the machine ca. 1,9 x 0,8 x 1,56 m
            Description :
            3-axis digital display
            3-jaw chuck 200 mm.
            4-jaw chuck 200 mm.
            Faceplate 320mm
            bezel fixed
            running bezel
            4-fold steel holder.
            Halogen machine light
            machine light
            foot brake
            removable chip tray, chip protection wall
            Hardened and ground bed tracks
            Complete coolant system
            lining protection
            machine tools
          Datasheet
          Request / Contact
          used  Center Lathe HBM 330 x 600


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78063 · Center Lathe

          HBM - 330 x 600 - - -

          Technical details
          turning diameter over bed 320 mm︱turning diameter over slide rest 220 mm︱turning length 600 mm︱turning diameter in the gap 320 mm︱turning speeds 60 - 1650 U/min︱centre height 160 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱connected load frequency 400 V︱total power requirement 1,1 kW︱weight of the machine ca. 340 Kg︱dimensions of the machine ca. 1,4 x 0,75 x 0,7 m︱
          Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools
            turning diameter over bed 320 mm
            turning diameter over slide rest 220 mm
            turning length 600 mm
            turning diameter in the gap 320 mm
            turning speeds 60 - 1650 U/min
            centre height 160 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            connected load frequency 400 V
            total power requirement 1,1 kW
            weight of the machine ca. 340 Kg
            dimensions of the machine ca. 1,4 x 0,75 x 0,7 m
            Description :
            Center lathe with:
            3-jaw chuck 160 mm.
            4-jaw chuck 200 mm.
            Faceplate 200mm
            Fixed bezel
            Continuous bezel
            4-way steel holder.
            Halogen machine light
            Chip tray, chip protection wall
            Hardened and ground bed tracks
            Longitudinal and cross feed
            Complete coolant system
            Forage protection
            Set of change gears
            Machine tools
          Datasheet
          Request / Contact
          used  Center Lathe HBM 360 x 1000 DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78070 · Center Lathe

          HBM - 360 x 1000 DRO - - -

          Technical details
          turning diameter over bed 360 mm︱turning diameter over slide rest 220 mm︱turning length 1000 mm︱turning diameter in the gap 380 mm︱turning speeds 70 - 2000 U/min︱centre height 180 mm︱spindle bore 50 mm︱tailstock quill taper MT 3 MK︱connected load frequency 230 oder 400 V︱total power requirement 1,8 kW︱weight of the machine ca. 0.65 t︱dimensions of the machine ca. 2,0 x 0,8 x 1,56 m︱
          3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools
            turning diameter over bed 360 mm
            turning diameter over slide rest 220 mm
            turning length 1000 mm
            turning diameter in the gap 380 mm
            turning speeds 70 - 2000 U/min
            centre height 180 mm
            spindle bore 50 mm
            tailstock quill taper MT 3 MK
            connected load frequency 230 oder 400 V
            total power requirement 1,8 kW
            weight of the machine ca. 0.65 t
            dimensions of the machine ca. 2,0 x 0,8 x 1,56 m
            Description :
            3-axis digital display
            3-jaw chuck 200 mm.
            4-jaw chuck 200 mm.
            Faceplate 320mm
            bezel fixed
            running bezel
            4-fold steel holder.
            Halogen machine light
            machine light
            foot brake
            removable chip tray, chip protection wall
            Hardened and ground bed tracks
            Complete coolant system
            lining protection
            machine tools
          Datasheet
          Request / Contact
          used  Center Lathe HBM 320 x 900 Professionele


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78071 · Center Lathe

          HBM - 320 x 900 Professionele - - -

          Technical details
          turning diameter over bed 320 mm︱turning diameter over slide rest 200 mm︱turning length 900 mm︱turning diameter in the gap mm︱turning speeds 75 - 2000 U/min︱centre height 160 mm︱spindle bore 50 mm︱tailstock quill taper MT 3 MK︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,29 t︱dimensions of the machine ca. 2,0 x 0,8 x 1,56 m︱
          Professional lathe digital display 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools
            turning diameter over bed 320 mm
            turning diameter over slide rest 200 mm
            turning length 900 mm
            turning speeds 75 - 2000 U/min
            centre height 160 mm
            spindle bore 50 mm
            tailstock quill taper MT 3 MK
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,29 t
            dimensions of the machine ca. 2,0 x 0,8 x 1,56 m
            Description :
            Professional lathe
            digital display
            3-jaw chuck
            4-jaw chuck
            faceplate
            bezel fixed
            running bezel
            Quick-change steel holder with 4 cassettes
            Halogen machine light
            Chip tray, chip protection wall
            Hardened and ground bed tracks
            Complete coolant system
            feed protection
            machine tools
          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used  Drilling and Milling M/C HBM BF 25


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76016 · Drilling and Milling M/C

          HBM - BF 25 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 170 mm︱bore stroke 50 mm︱ 16 mm︱spindle taper MK 2 ︱spindle turning speed range 50 - 3000 U/min︱ 280 mm︱ 155 mm︱table surface area 500 x 180 mm︱connected load frequency 230 V︱max. distance between table and spindle-nose max. 320 mm︱total power requirement 0,8 kW︱weight of the machine ca. 150 Kg︱dimensions of the machine ca. 670 x 550 x 910 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!
            bore capacity in steel (diameter. 25 mm
            throat 170 mm
            bore stroke 50 mm
            16 mm
            spindle taper MK 2
            spindle turning speed range 50 - 3000 U/min
            280 mm
            155 mm
            table surface area 500 x 180 mm
            connected load frequency 230 V
            max. distance between table and . max. 320 mm
            total power requirement 0,8 kW
            weight of the machine ca. 150 Kg
            dimensions of the machine ca. 670 x 550 x 910 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content
            but without digital display !!
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM 40 H/V


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76022 · Drilling and Milling M/C

          HBM - 40 H/V - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 275 mm︱bore stroke 120 mm︱spindle taper MK 4 ︱turning speed range 75 - 3200 U/min︱ 190 mm︱ 490 mm︱table surface area 730 x 210 mm︱connected load frequency 400 V︱boring feeds: 0,1 - 0,18 - 0,26 mm/U︱total power requirement 1,1/1,5 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 0,8 x 0,75 x 1,85 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 40 mm
            throat 275 mm
            bore stroke 120 mm
            spindle taper MK 4
            turning speed range 75 - 3200 U/min
            190 mm
            490 mm
            table surface area 730 x 210 mm
            connected load frequency 400 V
            boring feeds: 0,1 - 0,18 - 0,26 mm/U
            total power requirement 1,1/1,5 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 0,8 x 0,75 x 1,85 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM 40 H


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76020 · Drilling and Milling M/C

          HBM - 40 H - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 275 mm︱bore stroke 120 mm︱spindle taper MK 4 ︱turning speed range 75 - 3200 U/min︱ 190 mm︱ 490 mm︱table surface area 700 x 210 mm︱connected load frequency 400 V︱diameter of hob max. 80 mm︱total power requirement 1,1/1,5 kW︱weight of the machine ca. 0,35 t︱dimensions of the machine ca. 0,8 x 0,75 x 1,85 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 40 mm
            throat 275 mm
            bore stroke 120 mm
            spindle taper MK 4
            turning speed range 75 - 3200 U/min
            190 mm
            490 mm
            table surface area 700 x 210 mm
            connected load frequency 400 V
            diameter of hob max. 80 mm
            total power requirement 1,1/1,5 kW
            weight of the machine ca. 0,35 t
            dimensions of the machine ca. 0,8 x 0,75 x 1,85 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM TYP 16


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76011 · Drilling and Milling M/C

          HBM - TYP 16 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 16 mm︱throat 180 mm︱bore stroke 85 mm︱spindle taper MK 2 ︱spindle diameter 47 mm︱spindle turning speed range 320 - 3300 U/min︱ 230 mm︱ 100 mm︱table surface area 420 x 155 mm︱connected load frequency 230 V︱ 900 x 600 x 300 cm︱total power requirement 0,75 kW︱weight of the machine ca. 8o Kg︱dimensions 0,7 x 0,7 x 0,8 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 16 mm
            throat 180 mm
            bore stroke 85 mm
            spindle taper MK 2
            spindle diameter 47 mm
            spindle turning speed range 320 - 3300 U/min
            230 mm
            100 mm
            table surface area 420 x 155 mm
            connected load frequency 230 V
            900 x 600 x 300 cm
            total power requirement 0,75 kW
            weight of the machine ca. 8o Kg
            dimensions 0,7 x 0,7 x 0,8 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 45 Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76001 · Drilling and Milling M/C

          HBM - BF 45 Profi - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 45 mm︱throat 230 mm︱bore stroke 125 mm︱spindle taper ISO 30 ︱spindle turning speed range 75 - 1600 U/min︱max. milling cutter diameter 80 mm︱ 560 mm︱ 230 mm︱table surface area 800 x 240 mm︱max. distance between table and spindle-nose 460 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 320 Kg︱dimensions of the machine ca. 1,0 x 0,8 x 1,45 m︱
          Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank
            bore capacity in steel (diameter. 45 mm
            throat 230 mm
            bore stroke 125 mm
            spindle taper ISO 30
            spindle turning speed range 75 - 1600 U/min
            max. milling cutter diameter 80 mm
            560 mm
            230 mm
            table surface area 800 x 240 mm
            max. distance between table and . 460 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 320 Kg
            dimensions of the machine ca. 1,0 x 0,8 x 1,45 m
            Description :
            Drilling and milling machine
            - Cross Support
            - Cabinet
            - Swivel spindle head left / right 90 °
            - Feed via hand crank
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 30 DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76014 · Drilling and Milling M/C

          HBM - BF 30 DRO - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 198 mm︱bore stroke 75 mm︱ 16 mm︱spindle taper MK3 ︱spindle turning speed range 95 - 2840 U/min︱ 320 mm︱ 190 mm︱table surface area 700 x 190 mm︱connected load frequency 400 V︱max. distance between table and spindle-nose 55 - 405 mm︱total power requirement 1,1 kW︱weight of the machine ca. 180 Kg︱dimensions of the machine ca. 0,75 x 1,05 x 1,3 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!
            bore capacity in steel (diameter. 30 mm
            throat 198 mm
            bore stroke 75 mm
            16 mm
            spindle taper MK3
            spindle turning speed range 95 - 2840 U/min
            320 mm
            190 mm
            table surface area 700 x 190 mm
            connected load frequency 400 V
            max. distance between table and . 55 - 405 mm
            total power requirement 1,1 kW
            weight of the machine ca. 180 Kg
            dimensions of the machine ca. 0,75 x 1,05 x 1,3 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content
            but without digital display !!
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 60


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76009 · Drilling and Milling M/C

          HBM - BF 60 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 35 mm︱throat 230 mm︱bore stroke 125 mm︱spindle taper ISO 40 ︱spindle turning speed range 115 - 1750 U/min︱ 560 mm︱ 175 mm︱table surface area 1000 x 240 mm︱max. distance between table and spindle-nose 375 mm︱connected load frequency 400 V︱total power requirement 0,85/1,5 kW︱weight of the machine ca. 0,95 t︱dimensions of the machine ca. 1,3 x 1,2 x 2,1 m︱
          Domestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Left / right switch. Emergency stop switch Pivot head swiveling Spindle protection. Small toolbox Machine base and X-axis feed optional.
            bore capacity in steel (diameter. 35 mm
            throat 230 mm
            bore stroke 125 mm
            spindle taper ISO 40
            spindle turning speed range 115 - 1750 U/min
            560 mm
            175 mm
            table surface area 1000 x 240 mm
            max. distance between table and . 375 mm
            connected load frequency 400 V
            total power requirement 0,85/1,5 kW
            weight of the machine ca. 0,95 t
            dimensions of the machine ca. 1,3 x 1,2 x 2,1 m
            Description :
            Domestic equipments:
            automatic feed and handwheel.
            Drill chuck with MK4 holder
            Digital depth display
            Left / right switch.
            Emergency stop switch
            Pivot head swiveling
            Spindle protection.
            Small toolbox

            Machine base and X-axis feed optional.
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 30


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76015 · Drilling and Milling M/C

          HBM - BF 30 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 200 mm︱bore stroke 70 mm︱ 16 mm︱spindle taper MK3 ︱spindle turning speed range 50 - 3000 U/min︱ 220 mm︱ 425 mm︱table surface area 700 x 210 mm︱connected load frequency V︱max. distance between table and spindle-nose 470 mm︱total power requirement 1,5 kW︱weight of the machine ca. 230 Kg︱dimensions of the machine ca. 0,75 x 1,05 x 1,2 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content
            bore capacity in steel (diameter. 32 mm
            throat 200 mm
            bore stroke 70 mm
            16 mm
            spindle taper MK3
            spindle turning speed range 50 - 3000 U/min
            220 mm
            425 mm
            table surface area 700 x 210 mm
            max. distance between table and . 470 mm
            total power requirement 1,5 kW
            weight of the machine ca. 230 Kg
            dimensions of the machine ca. 0,75 x 1,05 x 1,2 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content

          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 16


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76013 · Drilling and Milling M/C

          HBM - BF 16 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 16 mm︱throat 170 mm︱bore stroke 50 mm︱ 16 mm︱spindle taper MK2 ︱spindle turning speed range 50 - 2250 U/min︱ 320 mm︱ 145 mm︱table surface area 500 x 140 mm︱connected load frequency 230 V︱total power requirement 0,5 kW︱weight of the machine ca. 90 Kg︱dimensions of the machine ca. 0,5 x 0,45 x 0,84 m︱
          Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!
            bore capacity in steel (diameter. 16 mm
            throat 170 mm
            bore stroke 50 mm
            16 mm
            spindle taper MK2
            spindle turning speed range 50 - 2250 U/min
            320 mm
            145 mm
            table surface area 500 x 140 mm
            connected load frequency 230 V
            total power requirement 0,5 kW
            weight of the machine ca. 90 Kg
            dimensions of the machine ca. 0,5 x 0,45 x 0,84 m
            Description :
            Drilling and milling machine with
            - variable spindle speed
            - Digital depth display
            - Left / right switch
            - Cross support
            - swiveling spindle head
            - Feeds via hand crank
            - Tool case with content
            but without digital display !!
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 45 Profi DRO


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76030 · Drilling and Milling M/C

          HBM - BF 45 Profi DRO - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 45 mm︱quill stroke 125 mm︱ 560 mm︱ 230 mm︱table surface area 800 x 240 mm︱spindle turning speed range 75 - 3200 U/min︱max. milling cutter diameter 80 mm︱spindle taper ISO 30 ︱max. distance between table and spindle-nose 460 mm︱throat 230 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 580 Kg︱dimensions of the machine ca. 1,2 x 1,0 x 2,1 m︱
          Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.
            bore capacity in steel (diameter. 45 mm
            quill stroke 125 mm
            560 mm
            230 mm
            table surface area 800 x 240 mm
            spindle turning speed range 75 - 3200 U/min
            max. milling cutter diameter 80 mm
            spindle taper ISO 30
            max. distance between table and . 460 mm
            throat 230 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 580 Kg
            dimensions of the machine ca. 1,2 x 1,0 x 2,1 m
            Description :
            Equipment:
            All axes with 3-digital display.
            Quill travel has separate digit display.
            Automatic feed in X-axis and quill.
            Motorized Z-axis.
            tapping device.
            coolant system.
            machine base.
            Collet set, SK tool holder.
            Further machine accessories in box.
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 25 DRO big


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76018 · Drilling and Milling M/C

          HBM - BF 25 DRO big - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 175 mm︱bore stroke 50 mm︱ 16 mm︱spindle taper ISO 30 ︱spindle turning speed range 50 - 3000 U/min︱ 380 mm︱ 175 mm︱table surface area 700 x 180 mm︱connected load frequency 230 V︱max. distance between table and spindle-nose max. 320 mm︱total power requirement 0,75 kW︱weight of the machine ca. 150 Kg︱dimensions of the machine ca. 670 x 550 x 910 m︱
          Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools
            bore capacity in steel (diameter. 25 mm
            throat 175 mm
            bore stroke 50 mm
            16 mm
            spindle taper ISO 30
            spindle turning speed range 50 - 3000 U/min
            380 mm
            175 mm
            table surface area 700 x 180 mm
            connected load frequency 230 V
            max. distance between table and . max. 320 mm
            total power requirement 0,75 kW
            weight of the machine ca. 150 Kg
            dimensions of the machine ca. 670 x 550 x 910 m
            Description :
            Drilling and milling machine with large table
            Digital display SINO 3-axis.
            Digital display quill stroke.
            2 speed levels.
            Left/Right switch
            Pan head left/right 90°
            spindle protection.
            incl. tool box with various tools
          Datasheet
          Request / Contact
          used  Drilling and Milling M/C HBM BF 30 DRO big


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76017 · Drilling and Milling M/C

          HBM - BF 30 DRO big - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 200 mm︱bore stroke 70 mm︱ 16 mm︱spindle taper MK3 ︱spindle turning speed range 50 - 3000 U/min︱ 565 mm︱ 220 mm︱table surface area 840 x 210 mm︱connected load frequency 400 V︱max. distance between table and spindle-nose max. 470 mm︱total power requirement 1,1 kW︱weight of the machine ca. 230 Kg︱dimensions of the machine ca. 0,75 x 1,05 x 1,3 m︱
          Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools
            bore capacity in steel (diameter. 30 mm
            throat 200 mm
            bore stroke 70 mm
            16 mm
            spindle taper MK3
            spindle turning speed range 50 - 3000 U/min
            565 mm
            220 mm
            table surface area 840 x 210 mm
            connected load frequency 400 V
            max. distance between table and . max. 470 mm
            total power requirement 1,1 kW
            weight of the machine ca. 230 Kg
            dimensions of the machine ca. 0,75 x 1,05 x 1,3 m
            Description :
            Drilling and milling machine with large table
            Digital display SINO 3-axis.
            Digital display quill stroke.
            2 speed levels.
            Left/Right switch
            Pan head left/right 90°
            Recording MC 3 - B16.
            Drill chuck 3 - 16 mm.
            spindle protection.
            Machine stand.
            incl. tool box with various tools
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine HBM HBM 32


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76240 · Pillar Drilling Machine

          HBM - HBM 32 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 200 mm︱bore stroke 120 mm︱spindle taper MT 4 MK︱table: 290 x 270 mm︱column diameter 92 mm︱turning speeds 150 - 2450 U/min︱feeds 0 mm/U︱total power requirement 1,1 kW︱weight of the machine ca. 95 kg︱range L-W-H 0,66 x 0,8 x 1,7 m︱
          Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge.
            bore capacity in steel (diameter. 32 mm
            throat 200 mm
            bore stroke 120 mm
            spindle taper MT 4 MK
            table: 290 x 270 mm
            column diameter 92 mm
            turning speeds 150 - 2450 U/min
            total power requirement 1,1 kW
            weight of the machine ca. 95 kg
            range L-W-H 0,66 x 0,8 x 1,7 m
            Description :
            Column drilling machine with:
            ARBO / CE approved protective cover.
            Quick release chuck with pin.
            Tiltable work table.
            Deep stop.
            Ejector wedge.
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine HBM HBM 30 Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76241 · Pillar Drilling Machine

          HBM - HBM 30 Profi - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 250 mm︱bore stroke 130 mm︱spindle taper MT 3 MK︱table: 380 x 380 mm︱column diameter 98 mm︱turning speeds 75 - 3200 U/min︱feeds mm/U︱total power requirement 1,1 kW︱weight of the machine ca. 220 kg.︱range L-W-H 0,5 x 0,6 x 2,05 mm︱
          • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment
            bore capacity in steel (diameter. 30 mm
            throat 250 mm
            bore stroke 130 mm
            spindle taper MT 3 MK
            table: 380 x 380 mm
            column diameter 98 mm
            turning speeds 75 - 3200 U/min
            total power requirement 1,1 kW
            weight of the machine ca. 220 kg.
            range L-W-H 0,5 x 0,6 x 2,05 mm
            Description :
            • machine base for clamping high workpieces
            • Digital Depth Gauge
            • Gearbox swivels 180 °
            • silent running through geärtete, ground oil-cooled gears
            • Tapping Function
            • electromagnetic clutch for drill feed
            • automatic feed
            • electric drive for table height adjustment
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine HBM HBM 5040


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76245 · Pillar Drilling Machine

          HBM - HBM 5040 - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 350 mm︱bore stroke 180 mm︱spindle taper MT 4 MK︱table: 560 x 560 mm︱column diameter 140 mm︱turning speeds 50 - 1450 U/min︱feeds 0,1 - 0,2 mm/U︱total power requirement 1,5 kW︱weight of the machine ca. 580 kg︱range L-W-H 2,27 x 0,7 x 1,1 mm︱
          • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment
            bore capacity in steel (diameter. 40 mm
            throat 350 mm
            bore stroke 180 mm
            spindle taper MT 4 MK
            table: 560 x 560 mm
            column diameter 140 mm
            turning speeds 50 - 1450 U/min
            feeds 0,1 - 0,2 mm/U
            total power requirement 1,5 kW
            weight of the machine ca. 580 kg
            range L-W-H 2,27 x 0,7 x 1,1 mm
            Description :
            • machine base for clamping high workpieces
            • Digital Depth Gauge
            • Gearbox swivels 180 °
            • silent running through geärtete, ground oil-cooled gears
            • Tapping Function
            • electromagnetic clutch for drill feed
            • automatic feed
            • electric drive for table height adjustment
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine HBM HBM 40 delux


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-76243 · Pillar Drilling Machine

          HBM - HBM 40 delux - - -Neu- -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 300 mm︱bore stroke 120 mm︱spindle taper MT 4 MK︱table: 500 x 460 mm︱column diameter 115 mm︱turning speeds 75- 3200 U/min︱feeds 0,1 - 0,18 - 0,26 mm/U︱total power requirement 1,5 kW︱weight of the machine ca. 350 kg︱range L-W-H 2,2 x 0,8 x 0,7 mm︱
          • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment
            bore capacity in steel (diameter. 40 mm
            throat 300 mm
            bore stroke 120 mm
            spindle taper MT 4 MK
            table: 500 x 460 mm
            column diameter 115 mm
            turning speeds 75- 3200 U/min
            feeds 0,1 - 0,18 - 0,26 mm/U
            total power requirement 1,5 kW
            weight of the machine ca. 350 kg
            range L-W-H 2,2 x 0,8 x 0,7 mm
            Description :
            • machine base for clamping high workpieces
            • Digital Depth Gauge
            • Gearbox swivels 180 °
            • silent running through geärtete, ground oil-cooled gears
            • Tapping Function
            • electromagnetic clutch for drill feed
            • automatic feed
            • electric drive for table height adjustment
          Datasheet
          Request / Contact

          Belt Grinding Machine

          used  Belt Grinding Machine HBM 100 x 1220


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-67100 · Belt Grinding Machine

          HBM - 100 x 1220 - - -Neu- -

          Technical details
          width of the strips 100 mm︱band length 1220 mm︱band speed 1140 m/min.︱ 0,62 x 0,4 x 0,35 cm︱total power requirement 1,5 kW︱weight of the machine ca. 0,04 t︱dimensions 0,97 x 0,67 x 0,37 m︱
          This machine can also be mounted without a base. Therefore it is suitable as a table belt sander. Base is included. Connection voltage 230 volts.
            width of the strips 100 mm
            band length 1220 mm
            band speed 1140 m/min.
            0,62 x 0,4 x 0,35 cm
            total power requirement 1,5 kW
            weight of the machine ca. 0,04 t
            dimensions 0,97 x 0,67 x 0,37 m
            Description :
            This machine can also be mounted without a base.
            Therefore it is suitable as a table belt sander.
            Base is included.
            Connection voltage 230 volts.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

            Profil du commerçant: WMT GmbH & Co.kg

          Contacter le commerçant



            WMT GmbH & Co.kg
           Siemens route 1
            46342 - Velen Ramsdorf
            Allemagne
            + 49 2863 92477-47 "> + 49 2863 92477-47
            +49 2863 92477-50
            info@wmt.de
            www.wmt.de

          Profil de commerçant

          Bienvenue sur les machines-outils WMT

          Achat et vente de machines-outils neuves et usagées.
          Vente de matériel d'atelier
          Achat de machines-outils d'occasion
          Traitement des résolutions d'exploitation
          Médiation d'installations complètes de production

          Commerce de machines-outils de tout genre. Vous cherchez une machine d'occasion? Venez nous rendre visite…

          Scie à ruban en aluminium Scie à ruban automatique - Scie à ruban automatique - Scie à ruban horizontale - Scie à ruban verticale - Scie à ruban horizontale Fraiseuse mobile à banc fixe - Rectifieuse à courroie universelle Perceuse de table Perceuse de table - Perceuse à tour central Tour automatique à banc incliné à froid Scie circulaire pour le perçage et le fraisage M / C Machine à rouler les brides et à coller les machines de traitement des plats et des tôles Plieuse Plieuse Presse à main Tour à grande charge Perceuse radiale à grande vitesse Hydr. Pressbrake Tour de presse hydraulique - commande par cycle Entailleuse de perforation Presse de perçage de piliers Machine à cintrer les tubes Cisaillement de plaques - Cisaillement de plaques hydraulique - Mécanique Presse pneumatique Pneumatique Perceuse radiale Perceuse radiale Systèmes de rails / systèmes d'arrêt Rouleuse cintreuse de rouleaux - Table de soudage rotative 3 Rolls Machine à affûter les lames de scie Section de cisaillement - Machine combinée pour le travail de la tôle Tour à table coulissante Presse à redresser - Rectifieuse double colonne Type de table Machine à aléser et à fraiser Presse à couder à fileter - Meuleuse d'outils à une seule colonne - Préréglage universel d'outils Machine de fraisage de salle d'outils - Universal Tryout Press - Hydraulique Machine universelle de tournage de navires Soudage Aspiration de fumée Table de soudage Équipement de table de soudage Support de roue Armoires à tiroirs Transpalettes électriques Transpalettes électriques à la main Armoires à outils Chariots à outils Système de rayonnage à bacs à fourches Chariot élévateur à fourches pour conteneur - Électricité Table élévatrice Charge aimant Sablage Plaque de traverselle de machine Mandrin de serrage Mandrin de serrage Table de serrage Table de déplacement / déplacement Table frontale Lynette Table rotative Étau

          WMT GmbH & Co.KG

          Siemens route 1

          46342 Velen-Ramsdorf
          FON: + 49 2863 92477-47
          FAX: + 49 2863 92477 50
          E-mail: info@wmt.de




          WMT GmbH  &  Co.kg   46342 - Velen-Ramsdorf Siemensstraße 1 Deutschland
          WMT GmbH & Co.kg

          Siemensstraße 1



          Contact Trader


            WMT GmbH & Co.kg
           Siemensstraße 1
            46342 - Velen-Ramsdorf
            Deutschland
            +49 2863 92477-47
            +49 2863 92477-50
            info@w-m-t.de
            www.w-m-t.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abricht- und Dickenhobel · Alu-Kreissäge · Aufspanntisch · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsäge mobil · Bandsägeautomat - Horizontal · Behälterdrehvorrichtung · Bettfräsmaschine - Vertikal · Biegemaschine horizontal · Blechbearbeitungsanlagen · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Bohrerschleifmaschine · Bügelmesschraube · Bügelsäge · Bügelsäge - Automatisch · Bürstenentgrater · Doppel-Gehrungsäge · Doppelschleifbock · Drehmaschine - zyklengesteuert · Drehmeißel/Drehstahl · Einständerpresse - Hydraulisch · Flachschleifmaschine · Flachstahl- / Plattenbearbeitung · Fräsmaschine - Universal · Gabelhubwagen - Elektro · Gabelhubwagen Elektro · Gabelhubwagen Hand · Gabelstapler Diesel · Gabelstapler Elektro · Gabelstapler Gas · Generatoren · Gewindebohrmaschine · Gewindeschneidmaschine · Gleitschleifanlage · Handhebelpresse · Handwerkzeuge · Hubtische · Kaltkreissäge · Kaltkreissäge - Automatik · Kapp- und Gehrungssäge · Kniehebelpresse - Einständer · Kombi-Schleifmaschine · Kompressoren · Krananlagen · Kreissäge · Kreuztisch · Kühlmittelanlage · Langgutregale · Lasthebemagnete · Leit- und Zugspindeldrehmaschine · Magnetbohrmaschine · Magnetspannplatte · Maschinen Untergestell · Maschinenleuchten · Messerschleifmaschine · Plasmaschneidegerät · Pneumatische Presse · Polierbock · Profil- Ring- Biegemaschine · Profilstahlschere - Kombiniert · Punktschweißmaschine · Regalsysteme · Reinigungssysteme · Richtpresse - Doppelständer · Rohrausschleifer · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Räumnadeln · Schnellradiale - Bohrmaschine · Schraubenkompressor · Schraubstock · Schubladenschränke · Schweißanlage · Schweißdrehtisch · Schweißdrehtisch - rund · Schweißrauchabsaugung · Schweißtisch · Schweißtisch-Zubehör · Schweißzubehör · Schwenkbiegemaschine · Schwerlastanhänger · Sicken- und Bördelmaschine · Sonstige Fördertechnik · Sonstiges · Strahlanlage · Ständerbohrmaschine · Sägeblattschärfmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tischbohrmaschine · Tischbohrwerk · Tischdrehbank · Trowalisiermaschine · Unterstellbock · Wasserpumpe · Werkbänke · Werkstattpressen - hydraulisch · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeugschränke · Werkzeugwagen ·