,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Frech GmbH - Stockist for used machines

          Machinelist:


          Folding Machine

          used  Folding Machine SCHRÖDER MAK 3


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76525 · Folding Machine

          SCHRÖDER - MAK 3 - - 2011 -

          Technical details
          sheet width 4020 mm︱plate thickness 1,50 mm︱distance between columns mm︱stroke of upper beam 250 mm︱cheek lowering Oberwange 250 mm ︱angle adjustable from - to 0-180 Grad︱total power requirement kW︱weight of the machine ca. 4,86 t︱dimensions of the machine ca. 5,185 x 1,220 x 1,425 m︱
          - Control POS 400 NC - Piece counter - foot switch - Rail quick clamping system - manual backgauge - 1x set split goat tool set - 1 pc. sharp rail - 2 pcs. bending splints - hydraulic upper tool clamping Optional - manual back gauge 750 mm without support table (new from SCHRÖDER) - if you are interested, please contact us
            sheet width 4020 mm
            plate thickness 1,50 mm
            stroke of upper beam 250 mm
            cheek lowering Oberwange 250 mm
            angle adjustable from - to 0-180 Grad
            weight of the machine ca. 4,86 t
            dimensions of the machine ca. 5,185 x 1,220 x 1,425 m
            Description :
            - Control POS 400 NC
            - Piece counter
            - foot switch
            - Rail quick clamping system
            - manual backgauge
            - 1x set split goat tool set
            - 1 pc. sharp rail
            - 2 pcs. bending splints
            - hydraulic upper tool clamping

            Optional - manual back gauge 750 mm without support table (new from SCHRÖDER) -
            if you are interested, please contact us
          Datasheet
          Request / Contact
          used  Folding Machine SCHRÖDER MAK 4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76562 · Folding Machine

          SCHRÖDER - MAK 4 - - 2005 -

          Technical details
          sheet width 4020 mm︱plate thickness 4,00 mm︱distance between columns mm︱upper beam stroke 400 mm︱Lowering of bending & lower beam 80 mm︱rated capacity 12,0 kVA︱total power requirement kW︱weight of the machine ca. 10,25 t︱dimensions of the machine ca. m︱
          - Bending beam drive on both sides - Ball screws on the upper beam - Manual crowning device for bending beam - Motorized bending beam adjustment program-controlled - Motorized lower beam adjustment program-controlled - Back gauge 1500 mm can be lowered pneumatically - Graphics control POS 2000 (display control recently renewed) - Sharpening rails 30° and 45° - Bending rail 20 mm
            sheet width 4020 mm
            plate thickness 4,00 mm
            upper beam stroke 400 mm
            Lowering of bending & lower beam 80 mm
            rated capacity 12,0 kVA
            weight of the machine ca. 10,25 t
            Description :
            - Bending beam drive on both sides
            - Ball screws on the upper beam
            - Manual crowning device for bending beam
            - Motorized bending beam adjustment program-controlled
            - Motorized lower beam adjustment program-controlled
            - Back gauge 1500 mm can be lowered pneumatically
            - Graphics control POS 2000 (display control recently renewed)
            - Sharpening rails 30° and 45°
            - Bending rail 20 mm
          Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used  Plate Shear - Mechanical SCHRÖDER MHSU 1500/2,0


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94167 · Plate Shear - Mechanical

          SCHRÖDER - MHSU 1500/2,0 - - 2009 -

          Technical details
          sheet width 1530 mm︱plate thickness 2,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 0,840 t︱dimensions of the machine ca. 1,90 x 1,30 x 1,20 m︱
          - manual back gauge 500mm - Hold-down device with hard rubber strip - Sheet metal holding device mechanically controlled to the rear including sheet metal slide - Rear area protection via light barrier
            sheet width 1530 mm
            plate thickness 2,00 mm
            weight of the machine ca. 0,840 t
            dimensions of the machine ca. 1,90 x 1,30 x 1,20 m
            Description :
            - manual back gauge 500mm
            - Hold-down device with hard rubber strip
            - Sheet metal holding device mechanically controlled to the rear including
            sheet metal slide
            - Rear area protection via light barrier
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil de commerçant: Frech GmbH

          Contacter le commerçant



            Frech GmbH
           Werderstr. 82
            74889 - Berlin
            Allemagne
            0049-7261-1011">0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de

          Profil de commerçant

          Fondée à 1945 par Karl Frech et dirigée par Mme Nicole Frech en tant que responsable de la génération 3rd, la société peut se prévaloir d'une longue tradition 60 dans la ville de Sinsheim, près de Heidelberg, dans la région de Baden en Allemagne. 

          Sinsheim est situé sur l’autoroute A6, à une heure de route des autoroutes Francfort / Main et Stuttgart. La société FRECH GmbH est spécialisée dans le traitement des équipements usagés (dépoussiéreurs, recoilers, niveleuses à rouleaux, lignes de bobines, lignes de profilage, lignes de refendage, lignes de coupe, laminoirs à froid et rectifieuses à cylindres). 

          En outre, l'équipe FRECH intervient comme agent dans les domaines suivants de machines d'occasion: wagons à bobines, plieuses, rectifieuses, presses plieuses, presses, ferrailleurs et cisailles. Contactez-nous s'il vous plaît !!! - Nous vous aiderons également dans d'autres domaines. Sur une superficie d'environ 1000 mètres carrés de halls et de surfaces de vente, nous présentons une gamme de machines d'occasion en constante évolution, en état de fonctionnement correct et, pour la plupart, propres à la démonstration. 

          Pourquoi des machines d'occasion? 

          Les machines d’occasion sont la plupart du temps immédiatement disponibles et sont prêtes à fonctionner. Frech est votre première adresse lorsque vous souhaitez réduire vos coûts en capital et augmenter l'efficacité économique de vos machines. 

          L'achat et la vente de machines d'occasion est une question de confiance - Frech est votre meilleur contact

          NOS CONTACTS




          Frech GmbH   74889 - Sinsheim Werderstr. 82 Deutschland
          Frech GmbH

          Werderstr. 82



          Contact Trader


            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Deutschland
            0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Abwickelhaspel - Doppel · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Coilanlage · Lochstanze · Längsteilanlage · Profilstahlschere · Querteilanlage · Richtmaschine · Schwenkbiegemaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch ·