,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Frech GmbH - Stockist for used machines

          Machinelist:


          Folding Machine

          used  Folding Machine HERA SM 4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76564 · Folding Machine

          HERA - SM 4 - - 2000 -

          Technical details
          sheet width 2500 mm︱plate thickness 6,00 mm︱distance between columns mm︱upper beam stroke 600 mm︱adjustment lower beam max. 100 mm︱bending beam adjustment max. 100 mm︱connected load OW 5,5 / BW 7,5 kW︱voltage 50 Hz, 400 V︱total power requirement kW︱weight of the machine ca. 7,00 t︱dimensions of the machine ca. m︱
          • Bending angle adjustment via potentiometer • Sharpening rail 45° • Bending rail • Operation manual Dimensions: approx. L 3.55 x W 1.1 (plus yellow warning plates) x H 2.0 m
            sheet width 2500 mm
            plate thickness 6,00 mm
            upper beam stroke 600 mm
            adjustment lower beam max. 100 mm
            bending beam adjustment max. 100 mm
            connected load OW 5,5 / BW 7,5 kW
            voltage 50 Hz, 400 V
            weight of the machine ca. 7,00 t
            Description :
            • Bending angle adjustment via potentiometer
            • Sharpening rail 45°
            • Bending rail
            • Operation manual

            Dimensions: approx. L 3.55 x W 1.1 (plus yellow warning plates) x H 2.0 m
          Datasheet
          Request / Contact
          used  Folding Machine HERA UM IV


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76557 · Folding Machine

          HERA - UM IV - - 1990 -

          Technical details
          sheet width 3000 mm︱plate thickness 6,00 mm︱distance between columns mm︱opening of the upper cheek 450 mm︱opening of the down cheek 125 mm︱Opening of the bending cheek 125 mm︱total power requirement kW︱weight of the machine ca. 7,00 t︱dimensions of the machine ca. m︱
          - Renewed control cabinet with Siemens control - controlled back gauge 1000 mm - Crowning adjustment - Support table with wheels - various bending rails including sharp rail - segmented goat's foot - Operation manual
            sheet width 3000 mm
            plate thickness 6,00 mm
            opening of the upper cheek 450 mm
            opening of the down cheek 125 mm
            Opening of the bending cheek 125 mm
            weight of the machine ca. 7,00 t
            Description :
            - Renewed control cabinet with Siemens control
            - controlled back gauge 1000 mm
            - Crowning adjustment
            - Support table with wheels
            - various bending rails including sharp rail
            - segmented goat's foot
            - Operation manual
          Datasheet
          Request / Contact
          used  Folding Machine HERA UM III / 1000 x 8 mm


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76531 · Folding Machine

          HERA - UM III / 1000 x 8 mm - - - ELGO TYP 86

          Technical details
          sheet width 1050 mm︱plate thickness 8,00 mm︱distance between columns 1250 mm︱angle adjustable from - to 0 - 180 Grad︱upper clamping bar adjustment 350 mm︱traversing speed OW 4,4 mm/sek︱Control ELGO TYP 86 ︱back stop - adjustable max. 1000 mm︱engine output 5,5 kW︱weight of the machine ca. 3200 kg︱range L-W-H 1900 x 2600 x 1600 mm︱
          ** maintained condition ** with a lot of bending tools (!!) ** Pointed rails, radius rails, bending rails, divided goat's foot rails etc. Furnishing: - heavy duty heavy duty folding machine, easy to operate - Angle adjustment via electric potentiometer - ELGO NC control unit TYPE 86 for electric backgauge - NC electric backgauge, with rear sheet metal support surface - electric/motorized bending beam - Electric/motorized upper beam .. max. 350 mm - manual lower beam adjustment .. max. 125 mm - manual bending beam adjustment .. max. 125 mm - Upper beam with 2x guide spindles - 1x free moving foot control - 1x mobile tool cabinet for bending tools Manufacturer description: - electronic lifting height and bending angle adjustment - Deactivation of the upper beam lifting height and the clamping pressure via timing relay and voltage meter - Pushbuttons for controlling the upper and bending beam with manual switching, included Upper beam can also be operated via foot switch - Adjustability of all cheeks - Silent twin motors oil bath worm gear - Two-way drive of upper and bending beam via 2 continuous shafts - Drive of the upper beam via threaded spindles - Drive of the bending beam via internal toothed segments
            sheet width 1050 mm
            plate thickness 8,00 mm
            distance between columns 1250 mm
            angle adjustable from - to 0 - 180 Grad
            upper clamping bar adjustment 350 mm
            traversing speed OW 4,4 mm/sek
            Control ELGO TYP 86
            back stop - adjustable max. 1000 mm
            engine output 5,5 kW
            weight of the machine ca. 3200 kg
            range L-W-H 1900 x 2600 x 1600 mm
            Description :
            ** maintained condition
            ** with a lot of bending tools (!!)
            ** Pointed rails, radius rails, bending rails, divided goat's foot rails etc.

            Furnishing:
            - heavy duty heavy duty folding machine, easy to operate
            - Angle adjustment via electric potentiometer
            - ELGO NC control unit TYPE 86 for electric backgauge
            - NC electric backgauge, with rear sheet metal support surface
            - electric/motorized bending beam
            - Electric/motorized upper beam .. max. 350 mm
            - manual lower beam adjustment .. max. 125 mm
            - manual bending beam adjustment .. max. 125 mm
            - Upper beam with 2x guide spindles
            - 1x free moving foot control
            - 1x mobile tool cabinet for bending tools

            Manufacturer description:
            - electronic lifting height and bending angle adjustment
            - Deactivation of the upper beam lifting height and the clamping pressure via
            timing relay and voltage meter
            - Pushbuttons for controlling the upper and bending beam with manual switching,
            included Upper beam can also be operated via foot switch
            - Adjustability of all cheeks
            - Silent twin motors oil bath worm gear
            - Two-way drive of upper and bending beam via 2 continuous shafts
            - Drive of the upper beam via threaded spindles
            - Drive of the bending beam via internal toothed segments


          Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used  Plate Shear - Hydraulic HERA TS 3


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94078 · Plate Shear - Hydraulic

          HERA - TS 3 - - 1998 -

          Technical details
          sheet width 3100 mm︱plate thickness 3,00 mm︱distance between columns mm︱cutting angle 1-3 °︱no.of strokes 18 /min.︱total power requirement kW︱weight of the machine ca. 3,60 t︱dimensions of the machine ca. 3,70 x 2,00 x 1,55 m︱
          Furnishing • Controlled backgauge 1000mm • SIMATIC OP7 controller • Finger protection • Angle stop 1000mm • Support arm • Manual cutting gap adjustment
            sheet width 3100 mm
            plate thickness 3,00 mm
            cutting angle 1-3 °
            no.of strokes 18 /min.
            weight of the machine ca. 3,60 t
            dimensions of the machine ca. 3,70 x 2,00 x 1,55 m
            Description :
            Furnishing
            • Controlled backgauge 1000mm
            • SIMATIC OP7 controller
            • Finger protection
            • Angle stop 1000mm
            • Support arm
            • Manual cutting gap adjustment
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil de commerçant: Frech GmbH

          Contacter le commerçant



            Frech GmbH
           Werderstr. 82
            74889 - Berlin
            Allemagne
            0049-7261-1011">0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de

          Profil de commerçant

          Fondée à 1945 par Karl Frech et dirigée par Mme Nicole Frech en tant que responsable de la génération 3rd, la société peut se prévaloir d'une longue tradition 60 dans la ville de Sinsheim, près de Heidelberg, dans la région de Baden en Allemagne. 

          Sinsheim est situé sur l’autoroute A6, à une heure de route des autoroutes Francfort / Main et Stuttgart. La société FRECH GmbH est spécialisée dans le traitement des équipements usagés (dépoussiéreurs, recoilers, niveleuses à rouleaux, lignes de bobines, lignes de profilage, lignes de refendage, lignes de coupe, laminoirs à froid et rectifieuses à cylindres). 

          En outre, l'équipe FRECH intervient comme agent dans les domaines suivants de machines d'occasion: wagons à bobines, plieuses, rectifieuses, presses plieuses, presses, ferrailleurs et cisailles. Contactez-nous s'il vous plaît !!! - Nous vous aiderons également dans d'autres domaines. Sur une superficie d'environ 1000 mètres carrés de halls et de surfaces de vente, nous présentons une gamme de machines d'occasion en constante évolution, en état de fonctionnement correct et, pour la plupart, propres à la démonstration. 

          Pourquoi des machines d'occasion? 

          Les machines d’occasion sont la plupart du temps immédiatement disponibles et sont prêtes à fonctionner. Frech est votre première adresse lorsque vous souhaitez réduire vos coûts en capital et augmenter l'efficacité économique de vos machines. 

          L'achat et la vente de machines d'occasion est une question de confiance - Frech est votre meilleur contact

          NOS CONTACTS




          Frech GmbH   74889 - Sinsheim Werderstr. 82 Deutschland
          Frech GmbH

          Werderstr. 82



          Contact Trader


            Frech GmbH
           Werderstr. 82
            74889 - Sinsheim
            Deutschland
            0049-7261-1011
            0049-7261-63966
            info@frech-maschinen.de
            www.frech-maschinen.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Abwickelhaspel - Doppel · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Coilanlage · Lochstanze · Längsteilanlage · Profilstahlschere · Querteilanlage · Richtmaschine · Schwenkbiegemaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch ·