sheet width 3200 mm︱plate thickness 4,00 mm︱distance between columns 3300 mm︱daylight opening OW 400 mm︱adjustment UW 80 mm︱pivoting angle 180 Grad︱clamping capacity max. 200 KN︱air pressure - required 4.5 - 6.0 bar︱total power requirement 9,8 kW︱oil volume 160 l︱weight 8500 kg︱range L-W-H 4550 x 2530 x 2275 mm︱

---

** well-maintained machine with lots of special accessories (!!) ** last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 * Swivel control panel, front right - CNC controlled / electro-motorized back gauge * pneumatic / lowerable material stop fingers * Adjustment speed max. 250 mm/sec. * Drive power 0.5 kw * Sheet metal support table at the back - motorized lower beam adjustment (S axis) * Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam * Adjustment range max. 400 mm * Lifting speed from .. max. 60.0 mm/sec. * Lifting speed to .. max. 115 mm/sec. - pneumatic upper tool clamping - pneumatic lower tool clamping - front protection device (swivel range) - 1x freely movable double foot switch - original operating instructions including electrical circuit diagram + hydraulic diagram **Special accessories included: - 1x split set EHT Geißfuß upper tool.. Height = 231 mm * 231 x 110 mm - hardened - 30° degrees - 1x split set EHT Geißfuß upper tool.. Height = 144 mm * 144 x 110 mm - hardened - 30° degrees - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm * 32 x 110 mm - hardened - 30° degrees - 1x split set EHT lower tool .. width = 15.0 mm * 68.5 x 20 mm - Radius 1.0 mm - 1x split set EHT lower tool .. width = 30.0 mm * 68.5 x 30 mm - Radius 1.0 mm - 1x EHT extension for the backgauge

pressure 125 t︱chamfer lenght 3050 mm︱distance between columns 2550 mm︱throat 300 mm︱stroke 240 mm︱dayligth 640 mm︱quantity of oil 250 l︱ ︱total power requirement kW︱weight of the machine ca. 15,00 t︱dimensions of the machine ca. m︱

---

• Cybelec ModEva PAC touch screen control, retrofitted • Pilz safety barrier retrofitted • controlled axes: Y1, Y2, X, R • 6 stop fingers can be moved laterally • Pneumatic die displacement • Upper and lower tool clamping automatically • 2 support arms on linear guides • CNC controlled crowning • Tool package consisting of: • Lower tool V6, segmented • Punch straight H 192, length = 3050mm Replacement blades are not included. Can be ordered in different radii. • Stamp offset H 220, length = 6x250mm Dimensions: approx. L 4.05 x W 1.80 (plus support arms) x H 2.90 m

pressure 125 t︱chamfer lenght 3550 mm︱distance between columns 2250 mm︱throat 300 mm︱stroke 240 mm︱dayligth 640 mm︱quantity of oil 250 l︱Control ︱total power requirement kW︱weight of the machine ca. 12,00 t︱dimensions of the machine ca. 3,90 x 1,80 x 3,00 m︱

---

• Control: Cybelec DNC 80 2D graphics • Upper tool clamping automatic • Lower tool clamping 90mm and 13mm • controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 • motorized crowning • 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° • Straight punch, H 350mm / approx. 70°, length 3060 mm, segmented

pressure 150 t︱chamfer lenght 4050 mm︱distance between columns 3050 mm︱column arm 350 mm︱dayligth 430 mm︱piston stroke 220 mm︱table width 300 mm︱oil volume 390 ltr.︱pressure 265 bar︱total power requirement 18,5 kW︱weight of the machine ca. 13.000 kg︱range L-W-H 4900 x 2250 x 3200 mm︱

---

** from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual

pressure 200 t︱chamfer lenght 3050 mm︱distance between columns 2550 mm︱throat 300 mm︱stroke 350 mm︱ajustment speed 80,0 mm/sec︱working feed 10,0 mm/sec︱return speed 58,0 mm/sec︱dayligth 450 mm︱table width 300 mm︱work height max. 1140 mm︱control DNC 60 ︱oil volume 180 ltr.︱total power requirement 18,5 kW︱weight of the machine ca. 15.500 kg.︱range L-W-H 4200 x 2200 x 3200 mm︱

---

Furnishing: - electro-hydraulic CNC press brake * last press test - carried out in 2022 - CYBELEC CNC control - model DNC 60 HP (conversion 2012) - Swivel operation, mounting side at the front right - electric back gauge, with ball screws (X axis) - electric-pneumatic height adjustment from the back gauge (R axis) - manual die shifting, including die shoe - electro-hydraulic upper tool clamping - electro-pneumatic lower tool clamping - EHT - split upper tools - EHT - split sub tools - 1x freely movable 2-hand foot control - manual central lubrication - Protective grille on the side + back - Operating instructions control + circuit diagrams machine

sheet width 3050 mm︱plate thickness 10,00 mm︱thickness at "Niro-steel" 6,00 mm︱cutting angle adjustment 0,5 - 2,5 °︱cutting gap adjustment 0,05 - 1,0 mm︱back stop - adjustable 10 - 1000 mm︱adjustment speed 180 mm/s︱down holder 14 Stück︱strokes per minute 12 - 25 ︱oil volume 300 Liter︱0 max. 300 bar︱voltage 400 V︱main drive 18,5 kW︱weight of the machine ca. 10.000 kg.︱dimensions of the machine ca. 4080 x 2350 x 2060 mm︱

---

** maintained condition (!!) ** was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) - 1x freely movable foot switch - original operating instructions **Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale