,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          HESSE+CO Maschinenfabrik GesmbH Industriezentrum NÖ-Süd - Stockist for used machines

          Machinelist:


          Water Jet Cutting Machine

          used  Water Jet Cutting Machine TCI BP-C 4020 Combi


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1712 · Water Jet Cutting Machine

          TCI - BP-C 4020 Combi - - -

          Technical details
          neuca. 14 - 16 Wochen ab AufSpanien217800 €︱ 4000x2000 mm︱ 37 kW︱ bei Wasserstrahl200 mm︱ 150 mm︱ 120 mm︱ 100 mm︱ 150 mm︱ 14000 mm︱ 2000 mm︱ 200 mm︱ 60 m/min︱ 20 m/min︱ +/- 0,05 mm/m︱ +/- 0,025 mm/m︱
          THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT oem50 HP SL-VI · 4000 bar · 1L with: - Hydraulic pump of variable flow and compensated pressure - High / low pressure selection that allows piercing - Electrical inversion of the cutting head - Noise level below 80dB - Leakage detection in de high-pressure circuit - Long lasting high pressure seals - System to uninstall de piston without uninstalling the cylinder - Air / oil heat exchanger •Installation of high pressure tubes •Human machine interface TCI SMARTTOUCH V6.0 •Communication system to communicate between the machine and TCI •CAD/CAM software and Postprocessor Lantek Expert 2D with autonesting •Machine safety system. Declaration of conformity and CE marking • Anti collision system TCI COLLISION PROTECTION 2,0 • Height contol system TCI SRA 3.0 Included special accessories: • Water softener TCI HIDROSYSTEM 2.0 (2-3-shift) • Oil/water chiller (closed circulation) • Slit clearance TCI EXTRACTION SYSTEM 2.0 4020 • Proportional control valve KMT 50 HP OEM • connecting kit plasma head with 2D water cutting head • plasmasource Thermal Dynamics Ultracut 200XT + torch (automaticgas console) Plasma cutting capacity: Mild steel Production piercing 25 mm Max. piercing 40 mm Cutting from edge 65 mm Stainless steel Production piercing 25 mm Max. piercing 25 mm Cutting from edge 50 mm Aluminium Production piercing 20 mm Max. piercing 25 mm Cutting from edge 50 mm THE CUTTING SYSTEM XY •A frame built with structural steel profiles, for a working range of 4000mm in the x axix •Water tank with material supports and water level regulation, constructed from stainless steel sheets. •An axis with a guided system on a bridge independent from the cutting table (X axis) consisting of a set of high precision skates and guides. This system provides a reliable linear transport, ensures a high rigidity, a minimum of frictional resistance and a high load capacity. The entire assembly is driven by a rack system / Precision reducer, which guarantees maximum performance, which is connected to a brushless AC motor. •The transverse linear axis (Y axis) mounted on the linear axis X uses the same system described in the previous point. •A nozzle support head (Z axis) is provided with a vertical guide system. Includes automatic adjustment of cutting height. •One long lasting nozzle, with orifice and pneumatic jet control valve. •Control panel integrated in the control cabinet to manage the machine. •Pushbuttons for autimatic operation with emergency stop.
            neu
            ca. 14 - 16 Wochen ab Auf
            Spanien
            217800 €
            4000x2000 mm
            37 kW
            bei Wasserstrahl
            200 mm
            150 mm
            120 mm
            100 mm
            150 mm
            1
            4000 mm
            2000 mm
            200 mm
            60 m/min
            20 m/min
            +/- 0,05 mm/m
            +/- 0,025 mm/m
            Description :
            THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS:

            •Structure of the machine that includes the cutting table and a bridge with a cutting head for
            abrasive and pure water cutting.
            •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a
            new generation multi touch screen.
            •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0
            •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the
            design software. TCI ABRASIVE 3.0
            •Abrasive backstop system TCI CUT CONTROL 3.0
            •High pressure pump KMT oem50 HP SL-VI · 4000 bar · 1L with:
            - Hydraulic pump of variable flow and compensated pressure
            - High / low pressure selection that allows piercing
            - Electrical inversion of the cutting head
            - Noise level below 80dB
            - Leakage detection in de high-pressure circuit
            - Long lasting high pressure seals
            - System to uninstall de piston without uninstalling the cylinder
            - Air / oil heat exchanger
            •Installation of high pressure tubes
            •Human machine interface TCI SMARTTOUCH V6.0
            •Communication system to communicate between the machine and TCI
            •CAD/CAM software and Postprocessor Lantek Expert 2D with autonesting
            •Machine safety system. Declaration of conformity and CE marking
            • Anti collision system TCI COLLISION PROTECTION 2,0
            • Height contol system TCI SRA 3.0

            Included special accessories:
            • Water softener TCI HIDROSYSTEM 2.0 (2-3-shift)
            • Oil/water chiller (closed circulation)
            • Slit clearance TCI EXTRACTION SYSTEM 2.0 4020
            • Proportional control valve KMT 50 HP OEM
            • connecting kit plasma head with 2D water cutting head
            • plasmasource Thermal Dynamics Ultracut 200XT + torch (automaticgas console)

            Plasma cutting capacity:

            Mild steel
            Production piercing
            25 mm

            Max. piercing
            40 mm

            Cutting from edge
            65 mm

            Stainless steel
            Production piercing
            25 mm

            Max. piercing
            25 mm

            Cutting from edge
            50 mm

            Aluminium
            Production piercing
            20 mm

            Max. piercing
            25 mm

            Cutting from edge
            50 mm

            THE CUTTING SYSTEM XY

            •A frame built with structural steel profiles, for a working range of 4000mm in the x axix
            •Water tank with material supports and water level regulation, constructed from stainless steel
            sheets.
            •An axis with a guided system on a bridge independent from the cutting table (X axis) consisting
            of a set of high precision skates and guides. This system provides a reliable linear transport,
            ensures a high rigidity, a minimum of frictional resistance and a high load capacity. The
            entire assembly is driven by a rack system / Precision reducer, which guarantees maximum
            performance, which is connected to a brushless AC motor.
            •The transverse linear axis (Y axis) mounted on the linear axis X uses the same system
            described in the previous point.
            •A nozzle support head (Z axis) is provided with a vertical guide system. Includes automatic
            adjustment of cutting height.
            •One long lasting nozzle, with orifice and pneumatic jet control valve.
            •Control panel integrated in the control cabinet to manage the machine.
            •Pushbuttons for autimatic operation with emergency stop.
          Datasheet
          Request / Contact
          used  Water Jet Cutting Machine TCI BP-C 4020


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1240 · Water Jet Cutting Machine

          TCI - BP-C 4020 - - -

          Technical details
          neuca. 14 - 16 Wochen ab AufSpanien174900 €︱ 3445.53 €︱ 4000x2000 mm︱ 37 kW︱ Max. Materialstärken200 mm︱ 150 mm︱ 120 mm︱ 100 mm︱ 150 mm︱ 14000 mm︱ 2000 mm︱ 200 mm︱ 60 m/min︱ 20 m/min︱ +/- 0,05 mm/m︱
          THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT oem50 HP SL-VI · 4000 bar · 1L with: - Hydraulic pump of variable flow and compensated pressure - High / low pressure selection that allows piercing - Electrical inversion of the cutting head - Noise level below 80dB - Leakage detection in de high-pressure circuit - Long lasting high pressure seals - System to uninstall de piston without uninstalling the cylinder - Air / oil heat exchanger •Installation of high pressure tubes •Human machine interface TCI SMARTTOUCH V6.0 •Communication system to communicate between the machine and TCI •CAD/CAM software and Postprocessor Lantek Expert 2D with autonesting •Machine safety system. Declaration of conformity and CE marking • Anti collision system TCI COLLISION PROTECTION 2,0 • Height contol system TCI SRA 3.0 Included special accessories: • Water softener TCI HIDROSYSTEM 2.0 (2-3-shift) • Oil/water chiller (closed circulation) • Slit clearance TCI EXTRACTION SYSTEM 2.0 4020 • Proportional control valve KMT 50 HP OEM THE CUTTING SYSTEM XY •A frame built with structural steel profiles, for a working range of 4000mm in the x axix •Water tank with material supports and water level regulation, constructed from stainless steel sheets. •An axis with a guided system on a bridge independent from the cutting table (X axis) consisting of a set of high precision skates and guides. This system provides a reliable linear transport, ensures a high rigidity, a minimum of frictional resistance and a high load capacity. The entire assembly is driven by a rack system / Precision reducer, which guarantees maximum performance, which is connected to a brushless AC motor. •The transverse linear axis (Y axis) mounted on the linear axis X uses the same system described in the previous point. •A nozzle support head (Z axis) is provided with a vertical guide system. Includes automatic adjustment of cutting height. •One long lasting nozzle, with orifice and pneumatic jet control valve. •Control panel integrated in the control cabinet to manage the machine. •Pushbuttons for autimatic operation with emergency stop.
            neu
            ca. 14 - 16 Wochen ab Auf
            Spanien
            174900 €
            3445.53 €
            4000x2000 mm
            37 kW
            Max. Materialstärken
            200 mm
            150 mm
            120 mm
            100 mm
            150 mm
            1
            4000 mm
            2000 mm
            200 mm
            60 m/min
            20 m/min
            +/- 0,05 mm/m
            Description :
            THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS:

            •Structure of the machine that includes the cutting table and a bridge with a cutting head for
            abrasive and pure water cutting.
            •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a
            new generation multi touch screen.
            •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0
            •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the
            design software. TCI ABRASIVE 3.0
            •Abrasive backstop system TCI CUT CONTROL 3.0
            •High pressure pump KMT oem50 HP SL-VI · 4000 bar · 1L with:
            - Hydraulic pump of variable flow and compensated pressure
            - High / low pressure selection that allows piercing
            - Electrical inversion of the cutting head
            - Noise level below 80dB
            - Leakage detection in de high-pressure circuit
            - Long lasting high pressure seals
            - System to uninstall de piston without uninstalling the cylinder
            - Air / oil heat exchanger
            •Installation of high pressure tubes
            •Human machine interface TCI SMARTTOUCH V6.0
            •Communication system to communicate between the machine and TCI
            •CAD/CAM software and Postprocessor Lantek Expert 2D with autonesting
            •Machine safety system. Declaration of conformity and CE marking
            • Anti collision system TCI COLLISION PROTECTION 2,0
            • Height contol system TCI SRA 3.0

            Included special accessories:
            • Water softener TCI HIDROSYSTEM 2.0 (2-3-shift)
            • Oil/water chiller (closed circulation)
            • Slit clearance TCI EXTRACTION SYSTEM 2.0 4020
            • Proportional control valve KMT 50 HP OEM

            THE CUTTING SYSTEM XY

            •A frame built with structural steel profiles, for a working range of 4000mm in the x axix
            •Water tank with material supports and water level regulation, constructed from stainless steel
            sheets.
            •An axis with a guided system on a bridge independent from the cutting table (X axis) consisting
            of a set of high precision skates and guides. This system provides a reliable linear transport,
            ensures a high rigidity, a minimum of frictional resistance and a high load capacity. The
            entire assembly is driven by a rack system / Precision reducer, which guarantees maximum
            performance, which is connected to a brushless AC motor.
            •The transverse linear axis (Y axis) mounted on the linear axis X uses the same system
            described in the previous point.
            •A nozzle support head (Z axis) is provided with a vertical guide system. Includes automatic
            adjustment of cutting height.
            •One long lasting nozzle, with orifice and pneumatic jet control valve.
            •Control panel integrated in the control cabinet to manage the machine.
            •Pushbuttons for autimatic operation with emergency stop.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd  2351 - Wiener Neudorf Straße 4 Objekt 8  Österreich
          Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd

          Straße 4 Objekt 8



          Contact Trader


            Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd
           Straße 4 Objekt 8
            2351 - Wiener Neudorf
            Österreich
            +43/2236/638 70-0
            +43/2236/636 62
            office@hesse-maschinen.com
            https://www.hesse-maschinen.com
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Abwickelhaspel · Alu-Kreissäge · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Blechentgratungsmaschine · Blechrundbiegemaschine - 3 Walzen · Blechrundbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Bohrmaschine · Bügelsäge · Bördelmaschine · CNC Plasma-Schneidanlage · Doppelschleifbock · Doppelständerexzenterpresse · Doppelständerpresse - Hydraulisch · Dornrohrbiegemaschine · Drehmaschine - zyklengesteuert · Einständer - Richtpresse · Einständerpresse - Hydraulisch · Exzenterpressen - Einständer · Falzformer · Flachschleifmaschine · Horizontal - Bandsägeautomat · Hydraulische Lochstanze · Hydraulische Presse · Kaltkreissäge · Kreisschere · Laserschneidmaschine · Lochstanze · Längs- und Querteilanlage · Profilieranlage · Profilstahlschere · Radialbohrmaschine · Ring- Profil- Biegemaschine · Rohrausschleifer · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Schweißtisch · Schwenkbiegemaschine · Sickenmaschine · Spitzendrehmaschine · Stanz- und Nibbelmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrwerk · Topfschleifmaschine · Viersäulenpresse - Hydraulisch · Vorschubapparat · Wasserstrahlschneidanlage · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal ·