,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          HANS - JÜRGEN GEIGER Maschinen-Vertrieb GmbH - Stockist for used machines

          Machinelist:


          Gang Drilling Machine

          used  Gang Drilling Machine WEBO GRADUA 23/4


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-785664 · Gang Drilling Machine

          WEBO - GRADUA 23/4 - - -

          Technical details
          number of spindles 4 ︱bore capacity in steel (diameter) 23 mm︱bore stroke 150 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            number of spindles 4
            bore capacity in steel (diameter. 23 mm
            bore stroke 150 mm
          Datasheet
          Request / Contact

          High Speed Machining Center

          used  High Speed Machining Center DECKEL MAHO HSC 75 LINEAR


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-776212 · High Speed Machining Center

          DECKEL MAHO - HSC 75 LINEAR - - 2009 -

          Technical details
          x-travel 885 mm︱y-travel 600 mm︱z-travel 600 mm︱
            x-travel 885 mm
            y-travel 600 mm
            z-travel 600 mm
          Datasheet
          Request / Contact

          Jig Boring Machine - Vertical

          used  Jig Boring Machine - Vertical SIP MP - 53


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-320736 · Jig Boring Machine - Vertical

          SIP - MP - 53 - - 1985 -

          Technical details
          spindle diameter 110 mm︱x-travel 900 mm︱y-travel 600 mm︱z-axis 200 mm︱table length 1020 mm︱table width 860 mm︱taper MK 40
          Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load 15 kW - 380 V - 50 Hz Accessories / Special Features - BOSCH CNC Control, Model MICRO 8, in 3 axes, with monitor. Program input is either manual or via cassette, or via interface entry. - Digital display for Z Axis. - Separate switch cabinet. - Various tools. - Oil cooler for spindle lubrication.
            spindle diameter 110 mm
            x-travel 900 mm
            y-travel 600 mm
            z-axis 200 mm
            table length 1020 mm
            table width 860 mm
            taper MK 40
            Description :
            Table size, approx. 1,020 x 860 mm
            Max. weight of workpiece 800 kg

            Table travel, longitudinal, max. (X) 900 mm
            Boring head travel, cross, max. (Y) 600 mm
            Boring spindle stroke (Z) 200 mm
            Vertical travel of cross beam (W) 635 mm

            Vertical distance between table and boring spindle 15 - 850 mm
            Distance between columns 950 mm
            Spindle Ø 110 mm
            Spindle taper internal/external ISO 40
            18 spindle speeds 10 - 2,500 rpm

            Milling feeds of table, infinitely variable 1 - 6,000 mm/min
            4 milling feeds of boring head 30 - 180 mm/min
            6 boring feeds 0.01 - 0.39 rpm
            Accuracy of all 3 axes when the machine was new 0.003 mm
            Quick feeds for table, boring head slide, and
            boring spindle, max. 6,000 mm/min

            Spindle drive 6.2 kW
            Weight, approx. 9,000 kg
            Total electrical load 15 kW - 380 V - 50 Hz

            Accessories / Special Features
            - BOSCH CNC Control, Model MICRO 8, in 3 axes, with monitor. Program input is either manual or via cassette, or via interface entry.
            - Digital display for Z Axis.
            - Separate switch cabinet.
            - Various tools.
            - Oil cooler for spindle lubrication.
          Datasheet
          Request / Contact
          used  Jig Boring Machine - Vertical HAUSER Type 5


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-263201 · Jig Boring Machine - Vertical

          HAUSER - Type 5 - - 1961 -

          Technical details
          spindle diameter 0 mm︱x-travel 700 mm︱y-travel 600 mm︱table length 800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Double Column Design Jig Borer Tablesize: 800 x 600mm
            x-travel 700 mm
            y-travel 600 mm
            table length 800 mm
            Description :
            Double Column Design Jig Borer
            Tablesize: 800 x 600mm
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal HELLER MC 16


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-678662 · Machining Center - Horizontal

          HELLER - MC 16 - - 2002 -

          Technical details
          x-travel 630 mm︱y-travel 630 mm︱z-travel 630 mm︱total power requirement 30 kW︱weight of the machine ca. 12500 kg︱dimensions of the machine ca. m︱
            x-travel 630 mm
            y-travel 630 mm
            z-travel 630 mm
            total power requirement 30 kW
            weight of the machine ca. 12500 kg
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal HELLER FST - MC 160/800 / E


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-164863 · Machining Center - Horizontal

          HELLER - FST - MC 160/800 / E - - 1999 -

          Technical details
          x-travel 800 mm︱y-travel 630 mm︱z-travel 560 mm︱total power requirement 60 kW︱weight of the machine ca. 12.5 t︱dimensions of the machine ca. m︱
          H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _______________________________________________________ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.
            x-travel 800 mm
            y-travel 630 mm
            z-travel 560 mm
            total power requirement 60 kW
            weight of the machine ca. 12.5 t
            Description :
            H E L L E R (Germany)
            5 Axis - CNC Controlled Horizontal Machining Centre
            Model FST- MC 160 / 800 / E Year 1998
            Only approx. 500 hours in operation
            _______________________________________________________
            Working range: Longitudinal stroke X axis 800 mm
            Vertical stroke Y axis 630 mm
            Cross stroke Z axis 560 mm

            NC rotary table Tilting A axis 180 °
            Turning B axis 360 °

            Size of pallet, approx. 250 x 620 mm
            Tool holder HSK 63A
            Spindle speeds, infinitely variable 63 - 20,000 rpm

            Feeds / quick feeds XYZ 1 - 70,000 mm/min

            Spindle drive 24 kW
            Total electrical load, approx. 60 kW - 400 V - 50 Hz
            Weight, approx. 12,500 kg

            Accessories / Special Features
            * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working
            operation on 5 sides.
            * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined.
            * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control.
            * Internal high pressure coolant supply, 50 bar.
            * Coolant preparation unit with filter and temperature control.
            * Oil mist exhaust.
            * Separate cooling aggregate for motor spindle and switch cabinet.
            * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area.
            Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal DECKEL-MAHO DMC 60 H


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-680494 · Machining Center - Horizontal

          DECKEL-MAHO - DMC 60 H - - 1995 - SIEMENS 840 C

          Technical details
          x-travel 600 mm︱y-travel 560 mm︱z-travel 560 mm︱Control SIEMENS 840 C ︱total power requirement 12 kW︱weight of the machine ca. 10000 kg︱dimensions of the machine ca. m︱
            x-travel 600 mm
            y-travel 560 mm
            z-travel 560 mm
            Control SIEMENS 840 C
            total power requirement 12 kW
            weight of the machine ca. 10000 kg
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal HÜLLER HILLE nbh 70


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-391670 · Machining Center - Horizontal

          HÜLLER HILLE - nbh 70 - - 1990 -

          Technical details
          x-travel 630 mm︱y-travel 550 mm︱z-travel 500 mm︱total power requirement 10 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            x-travel 630 mm
            y-travel 550 mm
            z-travel 500 mm
            total power requirement 10 kW
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal MAHO MH 1200 S


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-387971 · Machining Center - Universal

          MAHO - MH 1200 S - - 1991 -

          Technical details
          x-travel 1200 mm︱y-travel 600 mm︱z-travel 600 mm︱total power requirement 25 kW︱weight of the machine ca. 11,5 t︱
          M A H O (Germany) CNC Controlled Bed Type Universal Machining Centre Model MH 1200 S (120012) Year 1991 * Partially reconditioned in Year 2007 by MMD Company _____________________________________________________________ Table travel: X axis, longitudinal 1,200 mm Y axis, vertical 600 mm Spindle head Z axis, cross 600 mm Rotary Table size 1,000 x 800 mm Distance between spindle and column, max. 900 mm Spindle taper SK 40 Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Max. weight of workpiece 1,000 kg Feeds / quick feeds, X, Y and Z Axes 1 – 4,000 / 12,000 mm/min Feeds / quick feeds, B Axis 1 – 1,500° / 10 rpm Spindle drive 15 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 11,500 kg Dimensions of machine 2.75 x 5.10 x height 2.90 / 3.40 m Accessories / Special Features: * MAHO Continuous Path Control, Model CNC 432, for 5 axes, with colour monitor, graphics, and all the usual subprograms and cycles. Mobile manual control unit with RS 232 Interface Entry for external data communication. * CNC rotary table (B Axis) in conjunction with the CNC Controlled swivelling milling head allows machining in 5 axes, Resolution 360.000 ° * Vertical, rotating milling head with hydraulic tool clamping. * Horizontal milling spindle with hydraulic tool clamping. * CNC controlled tool changer with 36 positions. Tool life supervision and tool breakage supervision. With RENISHAW Measuring Probe. * Separate coolant device (no internal coolant supply) * Complete covered working area with sliding doors. * Chip conveyor. Oil cooler for the hydraulic system. Condition : Very good. Can be inspected under Power here in our stock. This is a very stable machine suitable for heavy cuts. It was partially reconditioned in 2007 by MMD Company: geometrically measured, and mechanic and electrics were tested - a beautiful machine for the “ Conaisseur”. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            x-travel 1200 mm
            y-travel 600 mm
            z-travel 600 mm
            total power requirement 25 kW
            weight of the machine ca. 11,5 t
            Description :
            M A H O (Germany)
            CNC Controlled Bed Type Universal Machining Centre
            Model MH 1200 S (120012)
            Year 1991 * Partially reconditioned in Year 2007 by MMD Company
            _____________________________________________________________

            Table travel: X axis, longitudinal 1,200 mm
            Y axis, vertical 600 mm
            Spindle head Z axis, cross 600 mm

            Rotary Table size 1,000 x 800 mm
            Distance between spindle and column, max. 900 mm

            Spindle taper SK 40
            Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm
            Max. weight of workpiece 1,000 kg

            Feeds / quick feeds, X, Y and Z Axes 1 – 4,000 / 12,000 mm/min
            Feeds / quick feeds, B Axis 1 – 1,500° / 10 rpm

            Spindle drive 15 kW
            Total electrical load, approx. 25 kW - 380 V - 50 Hz
            Weight, approx. 11,500 kg
            Dimensions of machine 2.75 x 5.10 x height 2.90 / 3.40 m

            Accessories / Special Features:
            * MAHO Continuous Path Control, Model CNC 432, for 5 axes, with colour
            monitor, graphics, and all the usual subprograms and cycles.
            Mobile manual control unit with RS 232 Interface Entry for external data
            communication.
            * CNC rotary table (B Axis) in conjunction with the CNC Controlled
            swivelling milling head allows machining in 5 axes, Resolution 360.000 °
            * Vertical, rotating milling head with hydraulic tool clamping.
            * Horizontal milling spindle with hydraulic tool clamping.
            * CNC controlled tool changer with 36 positions. Tool life supervision and
            tool breakage supervision. With RENISHAW Measuring Probe.
            * Separate coolant device (no internal coolant supply)
            * Complete covered working area with sliding doors.
            * Chip conveyor. Oil cooler for the hydraulic system.


            Condition : Very good. Can be inspected under Power here in our stock.
            This is a very stable machine suitable for heavy cuts.
            It was partially reconditioned in 2007 by MMD Company:
            geometrically measured, and mechanic and electrics were tested -
            a beautiful machine for the “ Conaisseur”.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical DEPO SPEED 1008


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-650703 · Machining Center - Vertical

          DEPO - SPEED 1008 - - 2003 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 1000 mm︱y-travel 800 mm︱z-travel 700 mm︱Control HEIDENHAIN iTNC 530 ︱total power requirement 50 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. m︱
            x-travel 1000 mm
            y-travel 800 mm
            z-travel 700 mm
            Control HEIDENHAIN iTNC 530
            total power requirement 50 kW
            weight of the machine ca. 16 t
          Datasheet
          Request / Contact
          used  Machining Center - Vertical SW BA 18


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-426948 · Machining Center - Vertical

          SW - BA 18 - - 1997 -

          Technical details
          x-travel 500 mm︱y-travel 350 mm︱z-travel 350 mm︱total power requirement 15 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. m︱
            x-travel 500 mm
            y-travel 350 mm
            z-travel 350 mm
            total power requirement 15 kW
            weight of the machine ca. 6 t
          Datasheet
          Request / Contact
          used  Machining Center - Vertical STAMA MC 010


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-593972 · Machining Center - Vertical

          STAMA - MC 010 - - 1987 - FANUC

          Technical details
          x-travel 500 mm︱y-travel 380 mm︱z-travel 300 mm︱Control FANUC ︱total power requirement 12 kW︱weight of the machine ca. 2300 kg︱dimensions of the machine ca. m︱
            x-travel 500 mm
            y-travel 380 mm
            z-travel 300 mm
            Control FANUC
            total power requirement 12 kW
            weight of the machine ca. 2300 kg
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine CHIRON 66 114


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-398954 · Pillar Drilling Machine

          CHIRON - 66 114 - - 1985 -

          Technical details
          bore capacity in steel (diameter) 10 mm︱throat 0 mm︱bore stroke mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            bore capacity in steel (diameter. 10 mm
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine WEBO V 7


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-163146 · Pillar Drilling Machine

          WEBO - V 7 - - 1975 -

          Technical details
          bore capacity in steel (diameter) 60 mm︱throat 420 mm︱bore stroke mm︱total power requirement 4 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. m︱
          Drilling Ø, steel or cast iron 60 mm Boring Ø with pre-bore ½ 100 mm Table Ø 600 mm Distance between spindle and column 420 mm Spindle taper MK5 12 spindle speeds 120 - 800 rpm Quill stroke 270 mm Mounting height above rotary table 800 mm Mounting height above base plate 1,400 mm 8 drilling feeds 0.13 - 1.8 rpm Spindle drive 4 kW Total electrical load, approx. 4 kW - 380 V - 50 Hz Weight approx. 2,600 kg Accessories / Special Features * Manual height adjustment of boring head. * 2-speed motor drive. * Swing-out rotary table. * Machined base plate (for setting up workpieces).
            bore capacity in steel (diameter. 60 mm
            throat 420 mm
            total power requirement 4 kW
            weight of the machine ca. 2,6 t
            Description :
            Drilling Ø, steel or cast iron 60 mm
            Boring Ø with pre-bore ½ 100 mm

            Table Ø 600 mm
            Distance between spindle and column 420 mm

            Spindle taper MK5
            12 spindle speeds 120 - 800 rpm
            Quill stroke 270 mm
            Mounting height above rotary table 800 mm
            Mounting height above base plate 1,400 mm

            8 drilling feeds 0.13 - 1.8 rpm

            Spindle drive 4 kW
            Total electrical load, approx. 4 kW - 380 V - 50 Hz
            Weight approx. 2,600 kg

            Accessories / Special Features
            * Manual height adjustment of boring head.
            * 2-speed motor drive.
            * Swing-out rotary table.
            * Machined base plate (for setting up workpieces).
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine CSEPEL RFh 75/2000


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-726484 · Radial Drilling Machine

          CSEPEL - RFh 75/2000 - - 1977 -

          Technical details
          bore capacity in steel (diameter) 75 mm︱arm length 1700 mm︱workpiece height max. 370 - 1700 mm︱total power requirement 12 kW︱weight of the machine ca. 7000 kg︱dimensions of the machine ca. m︱
          C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _______________________________________________________ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication * Built-on cubic table, approx. 600 x 1,200 x 300 mm. This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            bore capacity in steel (diameter. 75 mm
            arm length 1700 mm
            workpiece height max. 370 - 1700 mm
            total power requirement 12 kW
            weight of the machine ca. 7000 kg
            Description :
            C S E P E L (Hungary)
            Radial Drill
            Model RFh 75/2000
            Year 1977 Serial No. 61158
            _______________________________________________________

            Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm
            Thread cutting Steel / Cast Iron M 60 / 70
            Distance between column and spindle centre, max. 1,700 mm

            Spindle taper ( Morse Cone) MK 5
            Vertical stroke of radial arm 380 mm
            21 Spindle speeds 19 – 1.900 rpm

            Base plate 1.100 x 2.300 mm
            Mounting height, min./max. (base plate) 370 / 1,700 mm
            Swivelling radius +/- 180 °

            Vertical adjustment of radial arm 950 mm
            Horizontal adjustment of drilling slide 1.500 mm
            12 Drilling feeds 0.047 - 2 mm/rev

            Spindle drive, approx. 10 kW
            Total electrical load 12 KW - 380 V - 50 Hz
            Weight 7.000 kg

            Accessories / Special Features:

            * Preselector for the Spindle speeds, hydraulically actuated
            * Choice of Feed rate mechanically
            * Drilling with or without infeed, respectively manually by a fine feed
            device/resp. by handwheel
            * Drill head slide adjustable on radial arm manually, vertical Radial arm
            adjustment Motorized.
            * Depth of infeed adjustable by stop dogs on quill dial, with automatic
            return of quil after stop of infeed
            * Electro-mechanical clamping of the radial arm and the drillhead via switch
            * Coolant equipment built in the lower table plate, VOGEL Central lubrication
            * Built-on cubic table, approx. 600 x 1,200 x 300 mm.

            This machine is ideal for steel work, tool work, and mechanical engineering.

            Condition : average to good . Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

          Datasheet
          Request / Contact
          used  Radial Drilling Machine WEBO BR 32 V


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-749387 · Radial Drilling Machine

          WEBO - BR 32 V - - 1970 -

          Technical details
          bore capacity in steel (diameter) 32 mm︱arm length 1000 mm︱workpiece height max. 1400 mm︱total power requirement 6 kW︱weight of the machine ca. 3.700 kg︱dimensions of the machine ca. m︱
            bore capacity in steel (diameter. 32 mm
            arm length 1000 mm
            workpiece height max. 1400 mm
            total power requirement 6 kW
            weight of the machine ca. 3.700 kg
          Datasheet
          Request / Contact

          Special Precision Boring Machine

          used  Special Precision Boring Machine POSALUX MICROFOR PNC 3


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-210606 · Special Precision Boring Machine

          POSALUX - MICROFOR PNC 3 - - 1984 -

          Technical details
          cycle time 0 sec︱total power requirement 2,5 kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. m︱
          P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With setting microscope and machine lamp.
            total power requirement 2,5 kW
            weight of the machine ca. 1 t
            Description :
            P O S A L U X (Switzerland)
            Horizontal 3-Spindle Fine Boring Machines
            Model MICROFOR PNC 3
            Year 1984 Serial Nos. 6.8230/9


            Boring Æ 0.15 - 2 mm
            Spindle stroke 0 - 18 mm
            Working stroke, max. 0 - 12 mm
            Quick feed 60 mm/sec
            Boring feed 0 - 5 mm/sec

            Spindle speeds 3,500 - 11,500 rpm
            Distance between spindles, vertical, approx. 80 mm

            Table speeds (for deburring) approx. 100 rpm
            Table Æ, approx. 100 mm
            Table bore, approx. 70 mm
            Table slide swivelling device, approx. 60 °/sec
            Swivelling range 0 - 100 °

            Total drive, approx. 2.5 kW
            Weight 1,000 kg

            Accessories / Special Features
            Serial No. 6.8230/9
            Machine is equipped with a modern POSALUX SELECTRON Control
            with keyboard and LED for direct programming on the machine (in
            principle the same as with a punchboard control). With setting
            microscope and machine lamp.
          Datasheet
          Request / Contact
          used  Special Precision Boring Machine POSALUX MICROFOR 3 - NC 2


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-049045 · Special Precision Boring Machine

          POSALUX - MICROFOR 3 - NC 2 - - 1979 -

          Technical details
          cycle time 0 sec︱total power requirement 2,5 kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. m︱
          Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With setting microscope and machine lamp.
            total power requirement 2,5 kW
            weight of the machine ca. 1 t
            Description :
            Horizontal 3-Spindle Fine Boring Machines

            Boring Æ 0.15 - 2 mm
            Spindle stroke 0 - 18 mm
            Working stroke, max. 0 - 12 mm
            Quick feed 60 mm/sec
            Boring feed 0 - 5 mm/sec

            Spindle speeds 3,500 - 11,500 rpm
            Distance between spindles, vertical, approx. 80 mm

            Table speeds (for deburring) approx. 100 rpm
            Table Æ, approx. 100 mm
            Table bore, approx. 70 mm
            Table slide swivelling device, approx. 60 °/sec
            Swivelling range 0 - 100 °

            Total drive, approx. 2.5 kW
            Weight 1,000 kg

            Accessories / Special Features
            Serial No. 6.8230/9
            Machine is equipped with a modern POSALUX SELECTRON Control
            with keyboard and LED for direct programming on the machine (in
            principle the same as with a punchboard control). With setting
            microscope and machine lamp.
          Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used  Table Type Boring and Milling Machine WOTAN RAPID 1 R/3 CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-391847 · Table Type Boring and Milling Machine

          WOTAN - RAPID 1 R/3 CNC - - 1978 -

          Technical details
          spindle diameter 105 mm︱x-travel 1250 mm︱y-travel 1000 mm︱z-travel 600 mm︱table length 1100 mm︱table width 900 mm︱tool adaptor 50 ISO / MK︱total power requirement kW︱weight of the machine ca. t︱
          CNC Table Borer, Reconditioned 2002, BOSCH CC 300
            spindle diameter 105 mm
            x-travel 1250 mm
            y-travel 1000 mm
            z-travel 600 mm
            table length 1100 mm
            table width 900 mm
            tool adaptor 50 ISO / MK
            Description :
            CNC Table Borer, Reconditioned 2002, BOSCH CC 300
          Datasheet
          Request / Contact

          Engraving Machine

          used  Engraving Machine BAUBLYS DKSM 6-3


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-433404 · Engraving Machine

          BAUBLYS - DKSM 6-3 - - 1994 -

          Technical details
          x-travel 0 mm︱y-travel 0 mm︱z-travel mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Marking machine for cylindrical parts, rotary table, 4 axes, PV 70 Head
            Description :
            Marking machine for cylindrical parts, rotary table, 4 axes, PV 70 Head
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used  milling machining centers - vertical DECKEL-MAHO DMC 75 V linear


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-704938 · milling machining centers - vertical

          DECKEL-MAHO - DMC 75 V linear - - 2005 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 750 mm︱y-travel 560 mm︱z-travel 600 mm︱Control HEIDENHAIN iTNC 530 ︱total power requirement 70 kW︱weight of the machine ca. 11.000 kg︱dimensions of the machine ca. m︱
          D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            x-travel 750 mm
            y-travel 560 mm
            z-travel 600 mm
            Control HEIDENHAIN iTNC 530
            total power requirement 70 kW
            weight of the machine ca. 11.000 kg
            Description :
            D E C K E L M A H O (Germany)
            Vertical CNC Machining Centre with high speed linear drives
            in 3 Axis and in double column design for high precision work
            Model DMC 75 V LINEAR Year 2005
            _______________________________________________________

            Working range: Longitudinal stroke X Axis 750 mm
            Vertical stroke Z Axis 600 mm
            Cross stroke Y Axis 560 mm

            Table clamping size 950 x 650 mm
            Max. Table load 1.000 kg
            Max. height of workpiece 600 mm

            Tool holder Cone HSK 63
            Spindle (KESSLER) speeds 18,000 rpm
            Torque, max. 86/130 Nm
            Spindle run-up time / stop time 3.2 sec

            Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min
            Feed force 11.000/9.500 N
            Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s

            Spindle drive 25/35 kW
            Total electrical load, approx. 75 kW - 400 V - 50 Hz
            Weight, approx. 11.000 kg

            Accessories / Special Features:

            This machine is very interesting because of the very stable double Column
            Portal Design and with the modern linear technology for fast and powerful
            high precision work.

            * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all
            the usual options, cycles and sub programmes.
            * Table moves only in x axis and allows a comfortable loading of heavy
            workpieces
            * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max.
            length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by
            main spindle.
            * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head
            available.
            * Double linear motors ensure very fast feed motions and strong feed power,
            equipped with own cooling system.
            * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm
            * Completely covered working area with 2 sliding doors, one with spin-type bull-eye.
            * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp.
            * Spindle working hours approx. 23.000 h

            Condition : Very good. Machine can soon be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

          Datasheet
          Request / Contact
          used  milling machining centers - vertical STAMA MC 535 SM


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-458266 · milling machining centers - vertical

          STAMA - MC 535 SM - - 2000 -

          Technical details
          x-travel 800 mm︱y-travel 500 mm︱z-travel 510 mm︱total power requirement 60 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. m︱
            x-travel 800 mm
            y-travel 500 mm
            z-travel 510 mm
            total power requirement 60 kW
            weight of the machine ca. 10 t
          Datasheet
          Request / Contact
          used  milling machining centers - vertical STAMA MC 535 SM Single


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-458174 · milling machining centers - vertical

          STAMA - MC 535 SM Single - - 1998 -

          Technical details
          x-travel 800 mm︱y-travel 500 mm︱z-travel 510 mm︱total power requirement 60 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. m︱
            x-travel 800 mm
            y-travel 500 mm
            z-travel 510 mm
            total power requirement 60 kW
            weight of the machine ca. 10 t
          Datasheet
          Request / Contact
          used  milling machining centers - vertical STAMA MC 530 SM


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-458169 · milling machining centers - vertical

          STAMA - MC 530 SM - - 1997 -

          Technical details
          x-travel 800 mm︱y-travel 400 mm︱z-travel 350 mm︱total power requirement 40 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. m︱
            x-travel 800 mm
            y-travel 400 mm
            z-travel 350 mm
            total power requirement 40 kW
            weight of the machine ca. 8 t
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          •   
          •   

          Hans - Jürgen Geiger Maschinen-Vertrieb GmbH  72555 - Metzingen James-Watt-Str. 12 Deutschland
          Hans - Jürgen Geiger Maschinen-Vertrieb GmbH

          James-Watt-Str. 12



          Contact Trader


            Hans - Jürgen Geiger Maschinen-Vertrieb GmbH
           James-Watt-Str. 12
            72555 - Metzingen
            Deutschland
            (0049)-7123-18040
            (0049)-7123-18384
            geiger@geiger-germany.com
            www.geiger-germany.com
            Contact person:

           




          Machine category


          Abfallschere · Abkantpresse - hydraulisch · Abwälzfräs- und Stoßmaschine -kombiniert · Auswuchtmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Blechentgratungsmaschine · Bohr- und Fräsmaschine · Bohrerschleifmaschine · Bohrmaschine · Bohrwerkstisch · Bügelsägeautomat · CNC Drehmaschine · CNC-Karusselldrehmaschine - Einständer · Doppelscheibenschleifmaschine · Doppelscheibenschleifmaschine - vertik. · Doppelseitige Schleifmaschine · Drahterodiermaschine · Dreh-,Schwenk-, und Kipptisch · Drehmaschine - zyklengesteuert · Einständer - Ziehpresse - Hydraulisch · Einständerpresse - Hydraulisch · Entgratmaschine · Federprüfmaschine · Feinschleifmaschine · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Formfräser-Schärfmaschine · Fräsmaschine - Universal · Fräswerkzeuge · Futterautomat - Einspindel · Gewinde-Schnecken-Schleifmaschine · Gewindefräsmaschine · Gewinderollmaschine · Gewindeschleifmaschine · Gewindewirbelmaschine · Graviermaschine · Hobel-, Fräs- und Schleifmaschine · Hochfrequenzspindel · Hochgeschwindigkeits Bearbeitungszentrum · Honmaschine - handbetätigt · Honmaschine - Innen - Vertikal · Hydraulische - Doppelständerziehpresse · Hydraulische - Viersäulenpresse · Hydraulische - Zweisäulenpresse · Härteanlage - Induktion · Härteofen · Innenschleifmaschine · Kaltkreissäge · Kaltkreissäge - Vertikal · Kaltwalzmaschine · Kegelrad - Läppmaschine · Kegelrad-Prüfmaschine · Kegelradschleifmaschine · Keilwellenschleifmaschine · Koordinatenmeßmaschine · Koordinatenschleifmaschine · Kreissägenautomat · Kurbelwellenbandfinishmaschine · Langdrehautomat · Lehrenbohrwerk - Vertikal · Leit- und Zugspindeldrehmaschine · Leiterplattenfertigungsmaschine · Läppmaschine · Messmaschine · Nutenziehmaschine · Oberfräsmaschine · Ofen - Elektro · Plandrehbank · Plattenbohrwerk - Horizontal · Plattensägen vertikal · Profilprojektor · Präzisionsbandsäge · Punktschweißmaschine · Radialbohrmaschine · Reihenbohrmaschine · Richtmaschine · Richtpresse - Doppelständer · Rißprüfmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtischflachschleifmaschine - Vertikal · Rundtischflächenschleifmaschine - Horiz. · Schabrad-Schärfmaschine · Schleifscheibenprofiliergerät · Schneidradschärfmaschine · Schweißanlage · Schwenkbarer - Rundtisch · Schwenkbiegemaschine · Senkerodiermaschine · Sonderfeinbohrmaschine · Sondermaschine · Spitzenlose - Rundschleifmaschine · Stanzautomat - Doppelständer · Strangpressen · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tieflochbohrmaschine · Tischbohrwerk · Trennschleifmaschine · Tuschierpresse · Universal - Rundtisch · Vorschubapparat · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine · Werkzeugschleifmaschine - Universal · Wickelmaschine · Wärmeofen · Zahnflankenschleifmaschine · Zahnkantenfräsmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradhonmaschine · Zahnradprüfmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zahnstangenfräsmaschine · Zentrumschleifmaschine · Zugprüfmaschine ·