,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Kemmerich Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Vertical Turning Machine

          used  Vertical Turning Machine DOOSAN Puma V 8300 R


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20257 · Vertical Turning Machine

          DOOSAN - Puma V 8300 R - - 2019 - Fanuc 0i-TF

          Technical details
          turning diameter 830 mm︱swing diameter 920 mm︱turning height 690 mm︱control Fanuc 0i-TF ︱travel -x axis 495 mm︱travel -z axis 780 mm︱turning speed range - spindle 1940 U/min︱drive capacity - spindle motor 37 / 30 kW︱chucking diameter 380 mm︱turret (x-stations) 12 pos︱rapid traverse X-axis 20 m/min︱rapid traverse Z-axis 20 m/min︱feed mm/min︱spindle diameter in front bearing 160 mm︱c-axis 360° (in 0,001°) ︱workpiece weight 870 kg︱total power requirement 61,78 kVA︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. 2,1 x 2,7 x 3,6 m︱
          - Control unit FANUC 0i-TF - Tool Turret 12-fold - Coolant system - Foot switch - Automatic safety switch Front door & full enclosure - Work area lighting - Chip Conveyor
            turning diameter 830 mm
            swing diameter 920 mm
            turning height 690 mm
            control Fanuc 0i-TF
            travel -x axis 495 mm
            travel -z axis 780 mm
            turning speed range - spindle 1940 U/min
            drive capacity - spindle motor 37 / 30 kW
            chucking diameter 380 mm
            turret (x-stations) 12 pos
            rapid traverse X-axis 20 m/min
            rapid traverse Z-axis 20 m/min
            spindle diameter in front bearin. 160 mm
            c-axis 360° (in 0,001°)
            workpiece weight 870 kg
            total power requirement 61,78 kVA
            weight of the machine ca. 9,5 t
            dimensions of the machine ca. 2,1 x 2,7 x 3,6 m
            Description :
            - Control unit FANUC 0i-TF
            - Tool Turret 12-fold
            - Coolant system
            - Foot switch
            - Automatic safety switch Front door & full enclosure
            - Work area lighting
            - Chip Conveyor

          Datasheet
          Request / Contact
          used  Vertical Turning Machine WEISSER Univertor AC-1 R CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18521 · Vertical Turning Machine

          WEISSER - Univertor AC-1 R CNC - - 2011 - SINUMERIK 840D SL

          Technical details
          turning diameter 150 mm︱turning length - mm︱turning height - mm︱control SINUMERIK 840D SL ︱x-axis 830 mm︱z-axis 180 mm︱rapid power traverse in X-and Z direction 30 / 60 m/min︱turning speeds 4500 U/min︱spindle head A6 ︱spindle motor 27 kW︱spindle bearing diameter 90 mm︱circle diameter 670 mm︱chucking diameter 210 mm︱total power requirement 36 kVA︱weight of the machine ca. 8 t︱dimensions of the machine ca. 2,5 x 2,5 x 2,6 m︱
          multifunctional, single-spindle Pick-up lathe with vertical spindle Slide arrangement. - CNC control Siemens 840D SL - C axis - Chip conveyor - cooling unit - Feeding - disc turret with tool drive 12-fold 2 identic units available
            turning diameter 150 mm
            turning length - mm
            turning height - mm
            control SINUMERIK 840D SL
            x-axis 830 mm
            z-axis 180 mm
            rapid power traverse in X-and Z . 30 / 60 m/min
            turning speeds 4500 U/min
            spindle head A6
            spindle motor 27 kW
            spindle bearing diameter 90 mm
            circle diameter 670 mm
            chucking diameter 210 mm
            total power requirement 36 kVA
            weight of the machine ca. 8 t
            dimensions of the machine ca. 2,5 x 2,5 x 2,6 m
            Description :
            multifunctional, single-spindle Pick-up lathe with vertical spindle
            Slide arrangement.

            - CNC control Siemens 840D SL
            - C axis
            - Chip conveyor
            - cooling unit
            - Feeding
            - disc turret with tool drive 12-fold

            2 identic units available
          Datasheet
          Request / Contact
          used  Vertical Turning Machine HESSAPP DVH 250


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16138 · Vertical Turning Machine

          HESSAPP - DVH 250 - - 2002 - Siemens Sinumerik 840 D

          Technical details
          turning diameter 200 mm︱swing diameter 250 mm︱turning height 350 mm︱control Siemens Sinumerik 840 D ︱spindle diameter in front bearing 100 mm︱feed range 0,1 - 20000 mm/min︱rapid traverse 20 m/min︱stroke of vertical slide 300 mm︱spindle head DIN 55026 - Size A 650 - 6500 1/min︱Speed range drive tool 0 - 3000 1/min︱total power requirement 40 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,5 x 4,0 x 3,5 m︱
          equipped with: - CNC Control Siemens 840 D - Tool turret for 12 tools VDI 40 - driven tools on station 1/4/7/10 - conveyor belt - no coolant system (machines was added to a centrelized coolant system)
            turning diameter 200 mm
            swing diameter 250 mm
            turning height 350 mm
            control Siemens Sinumerik 840 D
            spindle diameter in front bearin. 100 mm
            feed range 0,1 - 20000 mm/min
            rapid traverse 20 m/min
            stroke of vertical slide 300 mm
            spindle head DIN 55026 - Size A 6
            50 - 6500 1/min
            Speed range drive tool 0 - 3000 1/min
            total power requirement 40 kW
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,5 x 4,0 x 3,5 m
            Description :
            equipped with:
            - CNC Control Siemens 840 D
            - Tool turret for 12 tools VDI 40
            - driven tools on station 1/4/7/10
            - conveyor belt
            - no coolant system (machines was added to a centrelized coolant system)
          Datasheet
          Request / Contact
          used  Vertical Turning Machine HESSAPP DVH 250


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16137 · Vertical Turning Machine

          HESSAPP - DVH 250 - - 1995 - Siemens Sinumerik 840 C

          Technical details
          turning diameter 200 mm︱swing diameter 250 mm︱turning height 350 mm︱control Siemens Sinumerik 840 C ︱spindle diameter in front bearing 100 mm︱feed range 0,1 - 20000 mm/min︱rapid traverse 20 m/min︱stroke of vertical slide 300 mm︱spindle head DIN 55026 - Size A 650 - 6500 1/min︱Speed range drive tool 0 - 3000 1/min︱total power requirement 40 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,5 x 4,0 x 3,5 m︱
          equipped with: - CNC Control Siemens 840 D - Tool turret for 12 tools VDI 40 - driven tools on station 1/4/7/10 - conveyor belt - no coolant system (machines was added to a centrelized coolant system)
            turning diameter 200 mm
            swing diameter 250 mm
            turning height 350 mm
            control Siemens Sinumerik 840 C
            spindle diameter in front bearin. 100 mm
            feed range 0,1 - 20000 mm/min
            rapid traverse 20 m/min
            stroke of vertical slide 300 mm
            spindle head DIN 55026 - Size A 6
            50 - 6500 1/min
            Speed range drive tool 0 - 3000 1/min
            total power requirement 40 kW
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,5 x 4,0 x 3,5 m
            Description :
            equipped with:
            - CNC Control Siemens 840 D
            - Tool turret for 12 tools VDI 40
            - driven tools on station 1/4/7/10
            - conveyor belt
            - no coolant system (machines was added to a centrelized coolant system)
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column KOHCHIYAMA TECH SH-55


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20170 · Vertical Turret Lathe - Double Column

          KOHCHIYAMA TECH - SH-55 - - 2014 - FANUC 31i MODEL B

          Technical details
          faceplate diameter 3740 mm︱swing diameter 5500 / 6200 mm︱turning height 1550 / 1200 mm︱Control FANUC 31i MODEL B ︱Max ram stroke 1250 mm︱cross rail - adjustment 3000 mm︱turning speeds 3-15 U/min︱spindle turning speed - stepless 15 - 1500 U/min︱workpiece weight 39,4 t︱max. dia. of teeth cutting 5500 mm︱tooth width 550 mm︱module 32 ︱cutter speeds 10 -150 U/min︱milling cutter dia. x width 450 x 110 mm︱milling head axial adjustable 2060 mm︱total power requirement - kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
          Complex TurnMill & Gear Cutting Machine - CNC control FANUC 31i B - Turning and Milling Function - ATC - Angular Milling Head - Gear Hobbing (internal and external) - Chip Conveyor
            faceplate diameter 3740 mm
            swing diameter 5500 / 6200 mm
            turning height 1550 / 1200 mm
            Control FANUC 31i MODEL B
            Max ram stroke 1250 mm
            cross rail - adjustment 3000 mm
            turning speeds 3-15 U/min
            spindle turning speed - stepless 15 - 1500 U/min
            workpiece weight 39,4 t
            max. dia. of teeth cutting 5500 mm
            tooth width 550 mm
            module 32
            cutter speeds 10 -150 U/min
            milling cutter dia. x width 450 x 110 mm
            milling head axial adjustable 2060 mm
            total power requirement - kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m
            Description :
            Complex TurnMill & Gear Cutting Machine

            - CNC control FANUC 31i B
            - Turning and Milling Function
            - ATC
            - Angular Milling Head
            - Gear Hobbing (internal and external)
            - Chip Conveyor
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column RAFAMET KCF 320/400N


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19837 · Vertical Turret Lathe - Double Column

          RAFAMET - KCF 320/400N - - 2011 - Siemens 840D SL

          Technical details
          faceplate diameter 3200 mm︱swing diameter 4000 mm︱turning height 3000 mm︱ram stroke each side 2100 mm︱side head - cross travel 1000 mm︱turning height over face plate with sidehead 1500 mm︱turning speeds 110 U/min︱main drive motor 121 kW︱Control Siemens 840D SL ︱workpiece weight max. 50 t︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          equipped with: - CNC Control SIEMENS SINUMERIK 840D SolutionLine - C-axis (angular positioning of the table) - S1-axis (table positioning measurement) - Table large-size rolling bearing - Table jaws 4 pcs with ratchet wrench - Cross rail sliding and clamping mechanism - Telescopic covers of the cross rail and columns guideways - HEIDENHAIN linear measuring systems of the ram and ram travel - HYDAC hydraulic unit - Right vertical turning-drilling-milling ram with toolholder for shank cutters - Automatic heads changers: -- right for 5 heads -- left for 3 heads 3 heads: - 1× 90° 2000 rpm - 1× ±120° 1800 rpm - 1× special 2000 it/m with internal cooling
            faceplate diameter 3200 mm
            swing diameter 4000 mm
            turning height 3000 mm
            ram stroke each side 2100 mm
            side head - cross travel 1000 mm
            turning height over face plate w. 1500 mm
            turning speeds 110 U/min
            main drive motor 121 kW
            Control Siemens 840D SL
            workpiece weight max. 50 t
            Description :
            equipped with:
            - CNC Control SIEMENS SINUMERIK 840D SolutionLine
            - C-axis (angular positioning of the table)
            - S1-axis (table positioning measurement)
            - Table large-size rolling bearing
            - Table jaws 4 pcs with ratchet wrench
            - Cross rail sliding and clamping mechanism
            - Telescopic covers of the cross rail and columns guideways
            - HEIDENHAIN linear measuring systems of the ram and ram travel
            - HYDAC hydraulic unit
            - Right vertical turning-drilling-milling ram with toolholder for shank cutters
            - Automatic heads changers:
            -- right for 5 heads
            -- left for 3 heads
            3 heads:
            - 1× 90° 2000 rpm
            - 1× ±120° 1800 rpm
            - 1× special 2000 it/m with internal cooling
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column HNK MACHINE TOOL CO VTC 50 / 60


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20175 · Vertical Turret Lathe - Double Column

          HNK MACHINE TOOL CO - VTC 50 / 60 - - 2010 - Fanuc 31 LTB

          Technical details
          faceplate diameter 5000 mm︱swing diameter 6000 mm︱turning height 3000 mm︱faceplate speeds from - to 50 UpM︱max. workpiece weight 60 t︱feed range mm/U︱main drive motor 155 kW︱Control Fanuc 31 LTB ︱cross rail adjustment - vertical 250 (x7) mm︱cross rail adjustment - horizontal -200 / +3300 mm︱milling spindle ︱milling head speed 2000 U/min︱milling spindle - taper ISO 50 ︱ram head dimension 400 x 400 mm︱ram adjustment 2200 mm︱milling spindle drive 22/26,5 kW︱total power requirement ca 200 kW︱weight of the machine ca. 210 t︱dimensions of the machine ca. 13,7 x 9,3 x 12,5 m︱
          CNC vertical lathe with milling device - CNC control Fanuc 31LTB - Face plate - C-axis 0.001° - 1 ram - Protective housing - Coolant system - 16-position tool changer (8M / 8T)
            faceplate diameter 5000 mm
            swing diameter 6000 mm
            turning height 3000 mm
            faceplate speeds from - to 50 UpM
            max. workpiece weight 60 t
            main drive motor 155 kW
            Control Fanuc 31 LTB
            cross rail adjustment - vertical 250 (x7) mm
            cross rail adjustment - horizont. -200 / +3300 mm
            milling head speed 2000 U/min
            milling spindle - taper ISO 50
            ram head dimension 400 x 400 mm
            ram adjustment 2200 mm
            milling spindle drive 22/26,5 kW
            total power requirement ca 200 kW
            weight of the machine ca. 210 t
            dimensions of the machine ca. 13,7 x 9,3 x 12,5 m
            Description :
            CNC vertical lathe with milling device
            - CNC control Fanuc 31LTB
            - Face plate
            - C-axis 0.001°
            - 1 ram
            - Protective housing
            - Coolant system
            - 16-position tool changer (8M / 8T)

          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column HNK MACHINE TOOL CO VTC 25 / 35


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20174 · Vertical Turret Lathe - Double Column

          HNK MACHINE TOOL CO - VTC 25 / 35 - - 2009 - Fanuc 18i-TB

          Technical details
          faceplate diameter 2500 mm︱swing diameter 3500 mm︱turning height 2000 mm︱faceplate speeds from - to 130 UpM︱max. workpiece weight 20 t︱feed range mm/U︱main drive motor 45/55 kW︱Control Fanuc 18i-TB ︱cross rail adjustment - vertical 250 (x4) mm︱cross rail adjustment - horizontal -200 / +1700 mm︱milling spindle ︱milling head speed 2000 U/min︱milling spindle - taper ISO 50 ︱ram head dimension 240 x 240 mm︱ram adjustment 1200 mm︱milling spindle drive 15/18,5 kW︱total power requirement ca 90 kW︱weight of the machine ca. ca 60 t︱dimensions of the machine ca. 8,6 x 6,7 x 7,4 m︱
          CNC vertical lathe with milling device - CNC control Fanuc 18i-TB - Face plate - C-axis 0.001° - 1 ram - Protective housing - Coolant system - 16-position tool changer (8M / 8T) 3 machines available
            faceplate diameter 2500 mm
            swing diameter 3500 mm
            turning height 2000 mm
            faceplate speeds from - to 130 UpM
            max. workpiece weight 20 t
            main drive motor 45/55 kW
            Control Fanuc 18i-TB
            cross rail adjustment - vertical 250 (x4) mm
            cross rail adjustment - horizont. -200 / +1700 mm
            milling head speed 2000 U/min
            milling spindle - taper ISO 50
            ram head dimension 240 x 240 mm
            ram adjustment 1200 mm
            milling spindle drive 15/18,5 kW
            total power requirement ca 90 kW
            weight of the machine ca. ca 60 t
            dimensions of the machine ca. 8,6 x 6,7 x 7,4 m
            Description :
            CNC vertical lathe with milling device
            - CNC control Fanuc 18i-TB
            - Face plate
            - C-axis 0.001°
            - 1 ram
            - Protective housing
            - Coolant system
            - 16-position tool changer (8M / 8T)

            3 machines available
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column DOERRIES-SCHARMANN VC 3500/300


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19225 · Vertical Turret Lathe - Double Column

          DOERRIES-SCHARMANN - VC 3500/300 - - 1995/2020 - Fanuc 18iTB

          Technical details
          faceplate diameter 3000 mm︱swing diameter 3500 mm︱turning height 3200 mm︱workpiece weight 50 t︱faceplate speeds from - to 0,6 - 110 U/min︱feed stepless 0,1 - 3000 mm/min︱Control Fanuc 18iTB ︱Drive 105 kW︱ram head dimension 250 x 250 mm︱spindle drive 22 kW︱spindle turning speed range 10 - 2000 U/min︱spindle taper BT 50 ︱x-axis -2550 / +2550 mm︱z-axis 1700 mm︱w-axis 1800 mm︱total power requirement - kVA︱weight of the machine ca. 65 t︱dimensions of the machine ca. - m︱
          2020 modernised with new CNC control equipped with: - CNC control FANUC 18iTB - coolant system (through spindle and external) - tool magazine 10-fold - Chip Conveyor - C-Axis - Live Tooling
            faceplate diameter 3000 mm
            swing diameter 3500 mm
            turning height 3200 mm
            workpiece weight 50 t
            faceplate speeds from - to 0,6 - 110 U/min
            feed stepless 0,1 - 3000 mm/min
            Control Fanuc 18iTB
            Drive 105 kW
            ram head dimension 250 x 250 mm
            spindle drive 22 kW
            spindle turning speed range 10 - 2000 U/min
            spindle taper BT 50
            x-axis -2550 / +2550 mm
            z-axis 1700 mm
            w-axis 1800 mm
            total power requirement - kVA
            weight of the machine ca. 65 t
            dimensions of the machine ca. - m
            Description :
            2020 modernised with new CNC control
            equipped with:
            - CNC control FANUC 18iTB
            - coolant system (through spindle and external)
            - tool magazine 10-fold
            - Chip Conveyor
            - C-Axis
            - Live Tooling
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column CARNAGHI PIETRO AC 18 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19862 · Vertical Turret Lathe - Double Column

          CARNAGHI PIETRO - AC 18 CNC - - 1991/2018 - Siemens 840D sl

          Technical details
          faceplate diameter 1600 mm︱swing diameter 2200 mm︱turning height 1600 mm︱max. workpiece weight 10000 kg︱faceplate turning speed range -stepless- 4,4 - 260 U/min︱drive motor 74 kW︱max. turning diameter 1850 mm︱feeds -stepless- 0,1 - 2000 mm/min︱rapid traverse 10 m/min︱x-axis -75 / +1920 mm︱y-axis +/- 1000 mm︱z-axis 1250 mm︱ram head dimension 250 x 300 mm︱milling spindle ︱spindle motor 23,5 kW︱spindle turning speed range 10 - 2400 U/min︱spindle taper ISO 50 ︱c-axis 360 °︱Feed C-Axis 0,10 - 5 UpM︱Control Siemens 840D sl
          Overhauled/modernized in 2018 -- new axis motors, new spindle motors -- new scales on the axles -- new electrics, new CNC -- mechanical overhaul and equipped with: - CNC control Siemens 840D sl - cross beam support with chisel slide for LATHEING, DRILLING and MILLING - Y-axis = table horizontal adjustment - C-axis - milling spindle - 22-fold tool changer and 2-positions for heads - enclosure - chip conveyor - Palletizer with 2 PALLETS
            faceplate diameter 1600 mm
            swing diameter 2200 mm
            turning height 1600 mm
            max. workpiece weight 10000 kg
            faceplate turning speed range -s. 4,4 - 260 U/min
            drive motor 74 kW
            max. turning diameter 1850 mm
            feeds -stepless- 0,1 - 2000 mm/min
            rapid traverse 10 m/min
            x-axis -75 / +1920 mm
            y-axis +/- 1000 mm
            z-axis 1250 mm
            ram head dimension 250 x 300 mm
            spindle motor 23,5 kW
            spindle turning speed range 10 - 2400 U/min
            spindle taper ISO 50
            c-axis 360 °
            Feed C-Axis 0,10 - 5 UpM
            Control Siemens 840D sl
            Description :
            Overhauled/modernized in 2018
            -- new axis motors, new spindle motors
            -- new scales on the axles
            -- new electrics, new CNC
            -- mechanical overhaul
            and equipped with:
            - CNC control Siemens 840D sl
            - cross beam support with chisel slide for LATHEING, DRILLING and MILLING
            - Y-axis = table horizontal adjustment
            - C-axis
            - milling spindle
            - 22-fold tool changer and 2-positions for heads
            - enclosure
            - chip conveyor
            - Palletizer with 2 PALLETS


          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column KOLOMNA KU 518


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19554 · Vertical Turret Lathe - Double Column

          KOLOMNA - KU 518 - - 1991 -

          Technical details
          faceplate diameter 2800 mm︱swing diameter 3200 mm︱turning height 2000 mm︱workpiece weight 50 t︱speeds 0,66 - 62,1 U/min︱feeds 0,059 - 470 mm/min︱ram swivable +/- 45 °︱connected load 70 kW︱dimensions of the machine ca. 5,1 x 9,3 x7,2 m︱weight of the machine ca. 95 t︱
          - 2 rams on crossbeam - Panel Movement of vertical supports: - Vertical 1250mm - Horizontal 1720mm Support movement per limb: - upper right turning 1250mm - upper left compound 1250mm Feeding, mm/min 0,059...470 Rapid feed, mm/min 2715
            faceplate diameter 2800 mm
            swing diameter 3200 mm
            turning height 2000 mm
            workpiece weight 50 t
            speeds 0,66 - 62,1 U/min
            feeds 0,059 - 470 mm/min
            ram swivable +/- 45 °
            connected load 70 kW
            dimensions of the machine ca. 5,1 x 9,3 x7,2 m
            weight of the machine ca. 95 t
            Description :
            - 2 rams on crossbeam
            - Panel

            Movement of vertical supports:
            - Vertical 1250mm
            - Horizontal 1720mm
            Support movement per limb:
            - upper right turning 1250mm
            - upper left compound 1250mm
            Feeding, mm/min 0,059...470
            Rapid feed, mm/min 2715
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column CARNAGHI AS 65 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20094 · Vertical Turret Lathe - Double Column

          CARNAGHI - AS 65 CNC - - 1988/2015 - Siemens 840D

          Technical details
          faceplate diameter 6500 mm︱swing diameter 7000 mm︱turning height 1000 mm︱faceplate speeds from - to 0,6 - 37 UpM︱max. workpiece weight 200 t︱feed range mm/U︱main drive motor 140 kW︱max. ram stroke 1500 (T)/1000 (G) mm︱Control Siemens 840D ︱cross rail adjustment - vertical 1000 mm︱total power requirement 150 kW︱weight of the machine ca. 186 t︱dimensions of the machine ca. - m︱
          - CNC control Siemens 840D (2 control panels) - faceplate - 2 rams: -- ram for turning operations with 12-fold tool changer (UTS 63) -- ram with grinding device - protective housing - Coolant
            faceplate diameter 6500 mm
            swing diameter 7000 mm
            turning height 1000 mm
            faceplate speeds from - to 0,6 - 37 UpM
            max. workpiece weight 200 t
            main drive motor 140 kW
            max. ram stroke 1500 (T)/1000 (G) mm
            Control Siemens 840D
            cross rail adjustment - vertical 1000 mm
            total power requirement 150 kW
            weight of the machine ca. 186 t
            dimensions of the machine ca. - m
            Description :

            - CNC control Siemens 840D (2 control panels)
            - faceplate
            - 2 rams:
            -- ram for turning operations with 12-fold tool changer (UTS 63)
            -- ram with grinding device
            - protective housing
            - Coolant
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column RAFAMET KCF 320/350


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19513 · Vertical Turret Lathe - Double Column

          RAFAMET - KCF 320/350 - - 1973/2016 - Siemens 840 D sl

          Technical details
          faceplate diameter 3200 mm︱swing diameter 3500 mm︱turning height 2200 mm︱max. ram stroke 985 mm︱faceplate turning speed range 0,8 - 40 U/min︱feed of support: 0,24 - 10,6 mm/U︱crossrail -rapid travel 600 mm/min︱ram swivable +/- 45 Grad ︱workpiece weight 17,5 t︱main drive motor 51 kW︱Control Siemens 840 D sl ︱tool taper Capto C60 ︱feed in x - axis 3 m/min︱feed range Z-direction 2,5 m/min︱total power requirement ca. 70 kW︱weight of the machine ca. 86 t︱dimensions of the machine ca. 7,8 x 6,2 x 6,7 m︱
          General overhaul with control retrofit 2010 Control upgrade 2016 equipped with: - CNC control: Siemens 840 D Sl - Hydraulic clamping - Hydraulic system - 2 ram supports on the crossbeam
            faceplate diameter 3200 mm
            swing diameter 3500 mm
            turning height 2200 mm
            max. ram stroke 985 mm
            faceplate turning speed range 0,8 - 40 U/min
            feed of support: 0,24 - 10,6 mm/U
            crossrail -rapid travel 600 mm/min
            ram swivable +/- 45 Grad
            workpiece weight 17,5 t
            main drive motor 51 kW
            Control Siemens 840 D sl
            tool taper Capto C60
            feed in x - axis 3 m/min
            feed range Z-direction 2,5 m/min
            total power requirement ca. 70 kW
            weight of the machine ca. 86 t
            dimensions of the machine ca. 7,8 x 6,2 x 6,7 m
            Description :
            General overhaul with control retrofit 2010
            Control upgrade 2016

            equipped with:
            - CNC control: Siemens 840 D Sl
            - Hydraulic clamping
            - Hydraulic system
            - 2 ram supports on the crossbeam
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column NILES DKZ 6300 x 2500


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19830 · Vertical Turret Lathe - Double Column

          NILES - DKZ 6300 x 2500 - - 1965 -

          Technical details
          faceplate diameter 5300 mm︱swing diameter 6300 mm︱turning height 2500 mm︱workpiece weight 50 t︱ram stroke 1000 mm︱cross-rail adjustment 2800 mm︱turning tool - shaft cross cut 50 x 50 ︱table turning speeds 0,35 - 14 U/min︱total power requirement 145 kW︱weight of the machine ca. 146 t︱dimensions of the machine ca. - m︱
          - 2 supports on the crossbar - 1 side support
            faceplate diameter 5300 mm
            swing diameter 6300 mm
            turning height 2500 mm
            workpiece weight 50 t
            ram stroke 1000 mm
            cross-rail adjustment 2800 mm
            turning tool - shaft cross cut 50 x 50
            table turning speeds 0,35 - 14 U/min
            total power requirement 145 kW
            weight of the machine ca. 146 t
            dimensions of the machine ca. - m
            Description :
            - 2 supports on the crossbar
            - 1 side support
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column PITTLER PV 1250 / 1-1


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19984 · Vertical Turret Lathe - Single Column

          PITTLER - PV 1250 / 1-1 - - 2009 - Siemens 840D

          Technical details
          faceplate diameter 800 mm︱swing diameter 1400 mm︱turning height mm︱turning diameter 1250 mm︱distance spindle head - tool holder 1850 mm︱control Siemens 840D ︱x-axis -455 / +1555 mm︱z-axis 1000 mm︱c-axis 360000 x 0,001 °︱diameter of spindle flange 380 mm︱spindle turning speed range 800 U/min︱spindle motor 2x 52 kW︱b-axis 0-270 °︱y-axis +/- 115 mm︱work piece power kW︱tool taper Capto C8 ︱worktool spindle axis 8000 U/min︱total power requirement 97 kW︱weight of the machine ca. 29 t︱dimensions of the machine ca. 11,5 x 4,2 x 4,5 m︱
          5-axis vertical CNC turning and milling centre - CNC control Siemens 840D - Chuck diameter 800mm - Chip conveyor - Swivel head with turning, milling spindle (with B and Y axis) - Tool changer 32-fold (Capto C8) - Coolant system - Work area flushing - Tool monitoring - Tools
            faceplate diameter 800 mm
            swing diameter 1400 mm
            turning diameter 1250 mm
            distance spindle head - tool hol. 1850 mm
            control Siemens 840D
            x-axis -455 / +1555 mm
            z-axis 1000 mm
            c-axis 360000 x 0,001 °
            diameter of spindle flange 380 mm
            spindle turning speed range 800 U/min
            spindle motor 2x 52 kW
            b-axis 0-270 °
            y-axis +/- 115 mm
            tool taper Capto C8
            worktool spindle axis 8000 U/min
            total power requirement 97 kW
            weight of the machine ca. 29 t
            dimensions of the machine ca. 11,5 x 4,2 x 4,5 m
            Description :
            5-axis vertical CNC turning and milling centre
            - CNC control Siemens 840D
            - Chuck diameter 800mm
            - Chip conveyor
            - Swivel head with turning, milling spindle (with B and Y axis)
            - Tool changer 32-fold (Capto C8)
            - Coolant system
            - Work area flushing
            - Tool monitoring
            - Tools
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column BERTHIEZ TFM 160


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19770 · Vertical Turret Lathe - Single Column

          BERTHIEZ - TFM 160 - - 2006 reb - NUM 1040

          Technical details
          faceplate diameter 1650 mm︱swing diameter 1880 mm︱turning height 1600 mm︱Control NUM 1040 ︱table load 15 t︱table turning speeds 2- 250 U/min︱main drive motor 37 kW︱ram head dimension 200x200 mm︱ram adjustment 800 mm︱total power requirement 55 kW︱weight of the machine ca. - t︱dimensions of the machine ca. 7,5 x 5,5 x 5,1 m︱
          overhauled 2006 equipped with: - CNC control NUM 1040 CNC & manual control unit - tool changer 12-fold Capto C6 - chip conveyor - paper belt filter system - High pressure cooling 350 bar - Ball screw and measuring scale Heidenhain in X and Z axis
            faceplate diameter 1650 mm
            swing diameter 1880 mm
            turning height 1600 mm
            Control NUM 1040
            table load 15 t
            table turning speeds 2- 250 U/min
            main drive motor 37 kW
            ram head dimension 200x200 mm
            ram adjustment 800 mm
            total power requirement 55 kW
            weight of the machine ca. - t
            dimensions of the machine ca. 7,5 x 5,5 x 5,1 m
            Description :
            overhauled 2006
            equipped with:
            - CNC control NUM 1040 CNC & manual control unit
            - tool changer 12-fold Capto C6
            - chip conveyor
            - paper belt filter system
            - High pressure cooling 350 bar
            - Ball screw and measuring scale Heidenhain in X and Z axis
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column DOERRIES SDE 600


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18179 · Vertical Turret Lathe - Single Column

          DOERRIES - SDE 600 - - 1978/1994 - Siemens 840C

          Technical details
          faceplate diameter 6300 mm︱swing diameter 1720 - 14400 mm︱turning height 5080 mm︱max. ram stroke 2500 mm︱workpiece weight 240 t︱control Siemens 840C ︱x-travel 4300 mm︱z-travel 2500 mm︱cross rail - adjustment 3300 mm︱total power requirement - kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
          CNC retrofit in 1994, machine has CNC indexing and a universal milling and drilling drive that it can drill and mill on any angle and is equipped with: - CNC Control Siemens 840C - Table drive motor = Siemens 150 Hp, 500/2000 RPM, - Table positioning for drilling & tapping, with table brake. - Table encoder = Heidenhain ROD 800 (36,000 pulse per rev). - Planetary / Hydraulic milling & drilling head, 22 kW, - Chip conveyor - I beam support spider on table (1,400 mm height), with jaws, to allow under job support to 10,800 mm. The machine table turns, and head column & ram moves too – X & Y axis.
            faceplate diameter 6300 mm
            swing diameter 1720 - 14400 mm
            turning height 5080 mm
            max. ram stroke 2500 mm
            workpiece weight 240 t
            control Siemens 840C
            x-travel 4300 mm
            z-travel 2500 mm
            cross rail - adjustment 3300 mm
            total power requirement - kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m
            Description :
            CNC retrofit in 1994, machine has CNC indexing and a universal milling and
            drilling drive that it can drill and mill on any angle and is equipped with:
            - CNC Control Siemens 840C
            - Table drive motor = Siemens 150 Hp, 500/2000 RPM,
            - Table positioning for drilling & tapping, with table brake.
            - Table encoder = Heidenhain ROD 800 (36,000 pulse per rev).
            - Planetary / Hydraulic milling & drilling head, 22 kW,
            - Chip conveyor
            - I beam support spider on table (1,400 mm height), with jaws, to allow under
            job support to 10,800 mm.

            The machine table turns, and head column & ram moves too – X & Y axis.
          Datasheet
          Request / Contact

          Deephole Boring Machine

          used  Deephole Boring Machine KARATS L-58BN (DH 30)


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18790 · Deephole Boring Machine

          KARATS - L-58BN (DH 30) - - 2016 - FANUC 31i-B

          Technical details
          core drilling diameter max. 56 - 650 mm︱bore depth 24000 mm︱swing diameter 5800 mm︱max. workpiece diameter 3400 mm︱workpiece length - max. 24000 mm︱workpiece weight max. 380 t︱speeds 160 U/min︱faceplate diameter 2500 mm︱control FANUC 31i-B ︱bore head horizontal movement 25870 mm︱cutting speed 0,1 - 1000 mm/min︱rapid feed 4000 mm/min︱main drive 500 kW︱total power requirement 300 kVA︱weight of the machine ca. 350 t︱
          Deep Hole Drill & Honing Machine (installed 2017) - CNC Control Fanuc 31i-B - BTA Boring - Boring Head (A-Axis) - Pressure table (Z-Axis) - Chip Conveyor
            core drilling diameter max. 56 - 650 mm
            bore depth 24000 mm
            swing diameter 5800 mm
            max. workpiece diameter 3400 mm
            workpiece length - max. 24000 mm
            workpiece weight max. 380 t
            speeds 160 U/min
            faceplate diameter 2500 mm
            control FANUC 31i-B
            bore head horizontal movement 25870 mm
            cutting speed 0,1 - 1000 mm/min
            rapid feed 4000 mm/min
            main drive 500 kW
            total power requirement 300 kVA
            weight of the machine ca. 350 t
            Description :
            Deep Hole Drill & Honing Machine (installed 2017)
            - CNC Control Fanuc 31i-B
            - BTA Boring
            - Boring Head (A-Axis)
            - Pressure table (Z-Axis)
            - Chip Conveyor
          Datasheet
          Request / Contact
          used  Deephole Boring Machine TOSHIBA-SHIBAURA


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20125 · Deephole Boring Machine

          TOSHIBA-SHIBAURA - - - 2010 reb - Fanuc

          Technical details
          core boring 70-560 mm︱bore depth 20000 mm︱drilling diameter 70-500 mm︱core boring capacity in St 60 - reboring special: 560-1000 mm︱workpiece diameter 3200 mm︱workpiece weight 200 t︱faceplate diameter 2900 mm︱speed of boring spindle: 100 - 500 U/min︱feed range 3 - 2000 mm/min︱boring spindle drive 55 kW︱spindle head drive 150 kW︱workpiece turning speeds 230 U/min︱control Fanuc ︱total power requirement - kW︱weight of the machine ca. - t︱
          2010 Retrofitted equipped with: - Fanuc Control - 4-Jaw Chuck - Oil Pressure Head - Boring Head - Drill Head - 2-Point Rollers Steady Rest (4) - 3 Point Steady Rest (2) - Bar Rest (2) - Coolant & Coolant Piping - Chip Conveyor - Honing Oil Tank & Honing Tool Bars
            core boring 70-560 mm
            bore depth 20000 mm
            drilling diameter 70-500 mm
            core boring capacity in St 60 - . special: 560-1000 mm
            workpiece diameter 3200 mm
            workpiece weight 200 t
            faceplate diameter 2900 mm
            speed of boring spindle: 100 - 500 U/min
            feed range 3 - 2000 mm/min
            boring spindle drive 55 kW
            spindle head drive 150 kW
            workpiece turning speeds 230 U/min
            control Fanuc
            total power requirement - kW
            weight of the machine ca. - t
            Description :
            2010 Retrofitted
            equipped with:
            - Fanuc Control
            - 4-Jaw Chuck
            - Oil Pressure Head
            - Boring Head
            - Drill Head
            - 2-Point Rollers Steady Rest (4)
            - 3 Point Steady Rest (2)
            - Bar Rest (2)
            - Coolant & Coolant Piping
            - Chip Conveyor
            - Honing Oil Tank & Honing Tool Bars
          Datasheet
          Request / Contact
          used  Deephole Boring Machine IXION AUERBACH IA 3 - TLF 1004


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19435 · Deephole Boring Machine

          IXION AUERBACH - IA 3 - TLF 1004 - - 2006 - Siemens 840D

          Technical details
          core drilling diameter max. 8 - 40 mm︱bore depth 1300 mm︱swing diameter . mm︱table load 7 / 10 t︱table surface area 1500 x 1000 mm︱travel -x axis 2000 mm︱travel -y axis 800 mm︱travel -z axis 2000 mm︱travel -w axis 1700 mm︱drilling capacity diameter max. 40 mm︱turning speed range - drilling 60 - 6000 U/min︱milling drive 7/11 kW︱spindle taper ISO 40 ︱Control Siemens 840D ︱A-Axis -25 / +15 °︱B-axis (table) 360 °︱total power requirement kW︱weight of the machine ca. t︱
          The Auerbach IXION IA3 TLF is for deep drilling of cubic and rotationally symmetrical workpieces. Scope of processing: deep drilling, milling of outer contours, pockets, Grooving, centering, drilling, reaming, tapping, double inclined drilling. equipped with: - Siemens Sinumerik 840 D with electronic handwheel, - chip conveyor - Coolant through Spindle - Tool Control - Steady -
            core drilling diameter max. 8 - 40 mm
            bore depth 1300 mm
            swing diameter . mm
            table load 7 / 10 t
            table surface area 1500 x 1000 mm
            travel -x axis 2000 mm
            travel -y axis 800 mm
            travel -z axis 2000 mm
            travel -w axis 1700 mm
            drilling capacity diameter max. 40 mm
            turning speed range - drilling 60 - 6000 U/min
            milling drive 7/11 kW
            spindle taper ISO 40
            Control Siemens 840D
            A-Axis -25 / +15 °
            B-axis (table) 360 °
            Description :
            The Auerbach IXION IA3 TLF is for deep drilling of cubic
            and rotationally symmetrical workpieces.

            Scope of processing: deep drilling, milling of outer contours, pockets,
            Grooving, centering, drilling, reaming, tapping, double inclined drilling.

            equipped with:
            - Siemens Sinumerik 840 D with electronic handwheel,
            - chip conveyor
            - Coolant through Spindle
            - Tool Control
            - Steady
            -
          Datasheet
          Request / Contact
          used  Deephole Boring Machine GILDEMEISTER & KNOLL B 3 N x 8000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20258 · Deephole Boring Machine

          GILDEMEISTER & KNOLL - B 3 N x 8000 - - 1985 -

          Technical details
          core drilling diameter max. 6 - 150 mm︱bore depth 8000 mm︱greates pass round over bed 500 mm︱bed width 450 mm︱bed length mm︱spindle turning speed range 140 - 1800 U/min︱spindle drive 30 kW︱total power requirement 110 kW︱weight of the machine ca. 13 t︱
          equipped with: - Steady rests - boring bar holder - coolant system - chip conveyor -- Electrical problem on a circuit board in the control panel/control cabinet area, electrics should be overhauled/replaced
            core drilling diameter max. 6 - 150 mm
            bore depth 8000 mm
            greates pass round over bed 500 mm
            bed width 450 mm
            spindle turning speed range 140 - 1800 U/min
            spindle drive 30 kW
            total power requirement 110 kW
            weight of the machine ca. 13 t
            Description :
            equipped with:
            - Steady rests
            - boring bar holder
            - coolant system
            - chip conveyor

            -- Electrical problem on a circuit board in the control panel/control cabinet
            area, electrics should be overhauled/replaced
          Datasheet
          Request / Contact
          used  Deephole Boring Machine BOEHRINGER B 630 - 4000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19178 · Deephole Boring Machine

          BOEHRINGER - B 630 - 4000 - - 1971/2007 - Siemens TP 177A

          Technical details
          core drilling diameter max. 250 mm︱bore depth 4000 mm︱swing diameter 650 mm︱core boring 250 mm︱Solid drill diameter 15 - 130 mm︱center height over square guideway 315 mm︱center height over work table 500 mm︱bed width 450 mm︱bore spindle turning speed range 35,5 - 1800 U/min︱max. torque on the spindle 4500 Nm︱bore spindle drive 55 kW︱main spindle bore 128 mm︱spindle diameter in front bearing 170 mm︱spindle head DIN 55022 Gr. 11 ︱rapid traverse of boring slide 3000 mm/min︱feed power 40000 / 28000 N︱feed 10 - 2000 m/min︱ über AC-Servomotor ︱Control Siemens TP 177A ︱electrics - voltage/frequency 3 AC, 400 / 50 V/Hz︱
          2007 complete rebuilt/retrofitted, - new PLC control Siemens TP 177A mit PLC Siemens S7-200 - Touch Screen - Siemens AC Drives - rotary tools and BTA System - paperbandfilter - chip conveyor and centrifuge - Rotary table 1250mm x 1750mm with 0.1 degree "B" Axis - Two 400 mm capacity hydraulic vices - Back bed section with headstock and 3 jaw chuck to allow boring up to max. 4000mm - 2 Sealing heads
            core drilling diameter max. 250 mm
            bore depth 4000 mm
            swing diameter 650 mm
            core boring 250 mm
            Solid drill diameter 15 - 130 mm
            center height over square guidew. 315 mm
            center height over work table 500 mm
            bed width 450 mm
            bore spindle turning speed range 35,5 - 1800 U/min
            max. torque on the spindle 4500 Nm
            bore spindle drive 55 kW
            main spindle bore 128 mm
            spindle diameter in front bearin. 170 mm
            spindle head DIN 55022 Gr. 11
            rapid traverse of boring slide 3000 mm/min
            feed power 40000 / 28000 N
            feed 10 - 2000 m/min
            über AC-Servomotor
            Control Siemens TP 177A
            electrics - voltage/frequency 3 AC, 400 / 50 V/Hz
            Description :
            2007 complete rebuilt/retrofitted,
            - new PLC control Siemens TP 177A mit PLC Siemens S7-200
            - Touch Screen
            - Siemens AC Drives
            - rotary tools and BTA System
            - paperbandfilter
            - chip conveyor and centrifuge
            - Rotary table 1250mm x 1750mm with 0.1 degree "B" Axis
            - Two 400 mm capacity hydraulic vices
            - Back bed section with headstock and 3 jaw chuck to allow boring up to max.
            4000mm
            - 2 Sealing heads
          Datasheet
          Request / Contact

          Jig Boring Machine

          used  Jig Boring Machine SIP MP - 5E


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20259 · Jig Boring Machine

          SIP - MP - 5E - - 197. -

          Technical details
          spindle diameter 95 mm︱x-travel 700 mm︱y-travel 500 mm︱spindle stroke 180 mm︱spindle taper Morse No. 4 ︱table surface area 900 x 770 mm︱table load 600 kg︱spindle turning speed range 50 - 2250 U/min︱bore feed range 0,04 - 0,21 mm/U︱table feed 25 -500 mm/min︱positioning accuracy 0,005 mm︱reading precision 0,001 mm︱power capacity 7 kVA︱weight of the machine ca. 5,2 t︱dimensions of the machine ca. 2,5 x 2 x 2,76 m︱
          - Digital Read Out
            spindle diameter 95 mm
            x-travel 700 mm
            y-travel 500 mm
            spindle stroke 180 mm
            spindle taper Morse No. 4
            table surface area 900 x 770 mm
            table load 600 kg
            spindle turning speed range 50 - 2250 U/min
            bore feed range 0,04 - 0,21 mm/U
            table feed 25 -500 mm/min
            positioning accuracy 0,005 mm
            reading precision 0,001 mm
            power capacity 7 kVA
            weight of the machine ca. 5,2 t
            dimensions of the machine ca. 2,5 x 2 x 2,76 m
            Description :
            - Digital Read Out
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal DOOSAN DAEWOO HM 1250


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19944 · Machining Center - Horizontal

          DOOSAN DAEWOO - HM 1250 - - 2013 - Fanuc 31i-MB

          Technical details
          x-travel 2100 mm︱y-travel 1500 mm︱z-travel 1500 mm︱Number of pallets 2 ︱size of pallet 1250 x 1250 mm︱dimension of workpiece 2000 x 1425 (H) mm︱feeds 0,1 - 12000 mm/min︱rapid traverse 24000 mm/min︱spindle motor 26/22 kW︱spindle turning speed range 10 - 6000 U/min︱Tool magazine positions 60 fach︱tool taper ISO 50 ︱control Fanuc 31i-MB ︱workpiece weight 3000 kg︱total power requirement 69 KVA︱total wight 31 t︱dimensions of the machine ca. 10,5 x 5,8 x 4,1 m︱
          Equipment : - CNC control FANUC 31i-MA 4-axis (X,Y,Z,B) - 2- pallets 1250 mm - internal spindle cooling, oil cooler - IKZ 20bar - tool changer 90-fold (BT 50) - chip conveyor - ball screw cooling - Glass scales Heidenhain - CE sign approx. 27000h Power On Hours, 12400h Cutting Time
            x-travel 2100 mm
            y-travel 1500 mm
            z-travel 1500 mm
            Number of pallets 2
            size of pallet 1250 x 1250 mm
            dimension of workpiece 2000 x 1425 (H) mm
            feeds 0,1 - 12000 mm/min
            rapid traverse 24000 mm/min
            spindle motor 26/22 kW
            spindle turning speed range 10 - 6000 U/min
            Tool magazine positions 60 fach
            tool taper ISO 50
            control Fanuc 31i-MB
            workpiece weight 3000 kg
            total power requirement 69 KVA
            total wight 31 t
            dimensions of the machine ca. 10,5 x 5,8 x 4,1 m
            Description :
            Equipment :
            - CNC control FANUC 31i-MA 4-axis (X,Y,Z,B)
            - 2- pallets 1250 mm
            - internal spindle cooling, oil cooler
            - IKZ 20bar
            - tool changer 90-fold (BT 50)
            - chip conveyor
            - ball screw cooling
            - Glass scales Heidenhain
            - CE sign

            approx. 27000h Power On Hours, 12400h Cutting Time
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          • 7  
          •   
          •   

          Kemmerich Werkzeugmaschinen GmbH  40789 - Monheim am Rhein Im Rottfeld 1a Deutschland
          Kemmerich Werkzeugmaschinen GmbH

          Im Rottfeld 1a



          Contact Trader


            Kemmerich Werkzeugmaschinen GmbH
           Im Rottfeld 1a
            40789 - Monheim am Rhein
            Deutschland
            +49 2173 207474
            +49 2173 207473
            info@kemmerich.biz
            www.kemmerich.biz
            Contact person:
          Herrn Andreas Kemmerich +49 2173 207474

            Seit 1982 ist die Firma Kemmerich Werkzeugmaschinen GmbH auf dem sich ständig ändernden Werkzeugmaschinen-Markt aktiv und handelt als international tätiges Maschinen-Handelsunternehmen mit gebrauchten Maschinen für die spanabhebende und spanlose Verarbeitung der metallverarbeitenden Industrie
          Kemmerich ist dabei auf Zahnradbearbeitungsmaschinen und Maschinen der Schwerzerspanung, wie zum Beispiel Dreh-, Fräs- und Schleifmaschinen sowie Bohrwerke, spezialisiert. Die Maschinen kommen unter anderem in der Automobilindustrie (Ausrüster und Zulieferer), im Zahnrad- und Getriebebau, der Produktion von Kugel- oder Wälzlagern, dem allgemeinen Maschinenbau zum Einsatz.

          Ansässig ist das Unternehmen inzwischen in Monheim am Rhein, im Herzen des Rheinlandes und in unmittelbarer Nähe zu den Messestädten Köln und Düsseldorf und deren Flughäfen. Dort stehen auf einer 2.200 qm großen, beheizbaren Ausstellungsfläche eine Vielzahl von konventionellen wie auch CNC/SPS-gesteuerten Metall be- und verarbeitenden Werkzeugmaschinen stets zur Besichtigung und Vorführung bereit.

          Mit einer Krankapazität von 32 Tonnen können jegliche Art von Maschinen gehändelt und bewegt werden. In der eigenen Werkstatt werden die Funktionsfähigkeit der Maschinen überprüft und gegebenenfalls festgestellte Mängel beseitigt. Zudem werden Maschinen auf Kundenwunsch modernisiert und modifiziert. Das Leistungsspektrum des Unternehmens umfasst zudem die Demontage oder Demontageüberwachung, Verladung, Verpackung sowie Land-, Seetransport und Zollabwicklungen, Montage und Inbetriebnahme beim Kunden durch Vermittlung von Spezialisten, Präsentation der Maschinen unter Strom (soweit möglich), Durchführung von Maschinenbewertungen und die Vermittlung von Kontakten.

          Anstatt in neue, teure Werkzeugmaschinen zu investieren und um lange Lieferzeiten zu umgehen, lohnt es sich oftmals, eine gut gepflegte Gebrauchtmaschine zu kaufen.




          Machine category


          · Abrichtschleifmaschine · Abwickelhaspel-Richtmaschine · Auswuchtmaschine · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Blechkaltrichtmaschine · Brückenlaufkran - Zweiträger · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Doppelscheibenschleifmaschine · Doppelständerexzenterpresse · Doppelständerziehpresse - Hydraulisch · Doppelständerziehpresse - Mechanisch · Drehmaschine - zyklengesteuert · Drehmaschine-konventionell-elektronisch · Elektronik / SPS-Steuerungen · Ersatzteile · Exzenterpresse - Doppelständer · Fahrständerfräsmaschine · Filteranlage · Flachschleifmaschine - Vertikal · Fräsmaschine - Universal · Futter · Führungsbahnschleifmaschine - Doppelst. · Gabelstapler - Gas · Gesenkschmiedepresse · Gewinde-Schnecken-Schleifmaschine · Gewinderollmaschine · Hartdreh- & Schleifzentrum · Hohlspindeldrehmaschine · Honmaschine - handbetätigt · Honmaschine - Innen - Horizontal · Hydraulische - Zweisäulenpresse · Hydraulische Presse · Innenschleifeinrichtung · Kaltwalzmaschine · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Kegelradfräsmaschine-Geradverzahnung · Koordinatenbohrmaschine · Kurbelwellenschleifmaschine · Langdrehautomat · Leit- und Zugspindeldrehmaschine · Lynette · Mechanische - Doppelständerziehpresse · Mehrspindelstangenautomat · Messerschleifmaschine · Motor · Nutenfräsmaschine - Horizontal · Nutenziehmaschine · Pfeilradhobelmaschine · Plan- und Spitzendrehbank · Plandrehmaschine · Planscheibe · Planschleifmaschine · Plattenbohrwerk - Horizontal · Plattenbohrwerk - Traghülse · Portal - Bearbeitungszentrum · Portalfräsmaschine · Portalfräsmaschine verfahrbar · Querteilanlage · Radialbohrmaschine · Radialbohrmaschine - transportabel · Rundschleifmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtisch-Bohrungs-Schleifmaschine · Schweißanlage · Schwerdrehmaschine · Spiralkegelradschneidmaschine · Spitzendrehbank · Spitzenlose - Rundschleifmaschine · Späneförderer · Stangenlademagazin · Stanz- und Nibbelmaschine · Stanzautomat-Doppelständer · Stanzpresse - Doppelständer · Stoßmaschine - Vertikal · Stufenpresse · Stähleschleifmaschine · Tieflochbohrmaschine · Tischbohrwerk · Traghülsenplattenbohrwerk · Transferpresse · Vertikaldrehmaschine · Verzahnungsmeßmaschine · Walzendrehmaschine · Walzenschleifmaschine · Wasserstrahlschneidanlage · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal · Wälzfräser - Hinterschleifmaschine · Zahnflankenschleifmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradhonmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zweiständer - Langhobelfräsmaschine · Zweiständerlanghobelmaschine ·