,
Réseau européen de revendeurs de machines de stockage
+49 (0) 2389 5299080
Service de recherche Vendre des machines d'occasion

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:
             Vue: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          Ambold Pressen GmbH - Stockist for used machines

          Machinelist:

          Eccentric Press - Single Column

          used Eccentric Press - Single Column HELMERDING ERVL 50 B

          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland
          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-943 · Eccentric Press - Single Column

          HELMERDING - ERVL 50 B - - überholt 2023/24 -

          Technical details
          pressure 50 t︱throat 245 mm︱stroke 14 / 90 mm︱ram adjustment 75 mm︱table height adjustment 150 mm︱strokes per minute 42/85 ︱table surface area 700 x 490 mm︱ram surface 400 x 230 mm︱tool hole in ram 40 mm︱total power requirement 4 kW︱weight of the machine ca. 3,41 t︱dimensions of the machine ca. 0,8 x 1,75 x 2,1 m︱
          Machine is partially overhauled in our house as follows: - Cleaning and inspection - new control cabinet with safety control and touchscreen display - new 2-hand control panel - Current UVV test with braking time measurement - Machine safe for hand inlay work
            pressure 50 t
            throat 245 mm
            stroke 14 / 90 mm
            ram adjustment 75 mm
            table height adjustment 150 mm
            strokes per minute 42/85
            table surface area 700 x 490 mm
            ram surface 400 x 230 mm
            tool hole in ram 40 mm
            total power requirement 4 kW
            weight of the machine ca. 3,41 t
            dimensions of the machine ca. 0,8 x 1,75 x 2,1 m
            Description :
            Machine is partially overhauled in our house as follows:
            - Cleaning and inspection
            - new control cabinet with safety control and touchscreen display
            - new 2-hand control panel
            - Current UVV test with braking time measurement
            - Machine safe for hand inlay work
          Datasheet
          Request / Contact
          used Eccentric Press - Single Column HELMERDING ERH 100

          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland
          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-998 · Eccentric Press - Single Column

          HELMERDING - ERH 100 - - 1998 CE -

          Technical details
          pressure 100 t︱throat 300 mm︱stroke 20 - 128 mm︱ram - range of adjustment 80 mm︱strokes per minute 60 - 90 ︱table surface area 920 x 600 mm︱ram surface 540 x 290 mm︱hole in the table 315 x 180 mm︱daylight, max. stroke above - ram adjustment above 520 mm︱tool hole in ram Dm. 50 mm︱total power requirement kW︱weight of the machine ca. 5,8 t︱dimensions of the machine ca. 1,8 x 1,7 x 2,2 m︱
          Furnishing: - Gear transmission - fixed table - Triple bearing shaft - semi-automatic stroke adjustment - hydraulic clutch-brake combination - hydraulic overload (modern unit mounted on the stand on the left) - Hydraulic unit with oil cooler for clutch mounted on the left side of the stand - Ball spindle adjustment using a ratchet - automatic central lubrication VOGEL - Operating instructions / CE declaration available Machine is partially overhauled in our company as follows: - dismantled, cleaned and completely technically checked - new paintwork - new control cabinet - new two-hand control panel - new Vogel unit (central lubrication) - current press test Machine safe for hand inlay work
            pressure 100 t
            throat 300 mm
            stroke 20 - 128 mm
            ram - range of adjustment 80 mm
            strokes per minute 60 - 90
            table surface area 920 x 600 mm
            ram surface 540 x 290 mm
            hole in the table 315 x 180 mm
            daylight, max. stroke above - ra. 520 mm
            tool hole in ram Dm. 50 mm
            weight of the machine ca. 5,8 t
            dimensions of the machine ca. 1,8 x 1,7 x 2,2 m
            Description :
            Furnishing:
            - Gear transmission
            - fixed table
            - Triple bearing shaft
            - semi-automatic stroke adjustment
            - hydraulic clutch-brake combination
            - hydraulic overload (modern unit mounted on the stand on the left)
            - Hydraulic unit with oil cooler for clutch mounted on the left side of the
            stand
            - Ball spindle adjustment using a ratchet
            - automatic central lubrication VOGEL
            - Operating instructions / CE declaration available

            Machine is partially overhauled in our company as follows:
            - dismantled, cleaned and completely technically checked
            - new paintwork
            - new control cabinet
            - new two-hand control panel
            - new Vogel unit (central lubrication)
            - current press test

            Machine safe for hand inlay work
          Datasheet
          Request / Contact
          used Eccentric Press - Single Column HELMERDING ERH 75 B

          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland
          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-866 · Eccentric Press - Single Column

          HELMERDING - ERH 75 B - - 1990 -

          Technical details
          pressure 75 t︱throat 300 mm︱stroke 8 - 110 mm︱table surface area 750 x 600 mm︱ram adjustment 75 mm︱ram surface 430 x 230 mm︱hole in the table 250 x 150 mm︱tool hole in ram 40 mm︱no. of strokes 60 + 90 Hub/min︱weight of the machine ca. 4,4 t︱total power requirement 4,5 - 6,8 kW︱dimensions of the machine ca. 1,95 x 1,1 x 2,35 m︱distance table/ram Hub unten, Stöß. unten 19 mm︱distance table/ram Hub oben, Stöß. oben 380 mm︱
          Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement
            pressure 75 t
            throat 300 mm
            stroke 8 - 110 mm
            table surface area 750 x 600 mm
            ram adjustment 75 mm
            ram surface 430 x 230 mm
            hole in the table 250 x 150 mm
            tool hole in ram 40 mm
            no. of strokes 60 + 90 Hub/min
            weight of the machine ca. 4,4 t
            total power requirement 4,5 - 6,8 kW
            dimensions of the machine ca. 1,95 x 1,1 x 2,35 m
            distance table/ram Hub unten, Stöß. unten 19 mm
            distance table/ram Hub oben, Stöß. oben 380 mm
            Description :
            Furnishing:
            - with hydraulic clutch-brake combination, with new hydraulics and oil cooler
            - with gear transmission in oil bath
            - fixed table prepared for the attachment of tool changing consoles
            - 2 roller bars in the table
            - mechanical overload in the ram

            The following work is carried out on the machine / partial overhaul:
            - Machine is completely disassembled, checked, seals changed, defective parts
            exchanged etc
            - Machine is repainted
            - new Balluff cam control
            - new hydraulic unit with oil cooler for the clutch
            - new Vogel central lubrication
            - new control cabinet with touch panel and ABB safety control
            - Current UVV test with braking time measurement
          Datasheet
          Request / Contact
          used Eccentric Press - Single Column HELMERDING ERH 100 B

          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland
          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-920 · Eccentric Press - Single Column

          HELMERDING - ERH 100 B - - 1988 -

          Technical details
          pressure 100 t︱throat 300 mm︱stroke 20 - 124 mm︱strokes per minute 60/90 ︱ram adjustment 85 mm︱table surface area 920 x 600 mm︱ram surface 540 x 290 mm︱daylight, max. stroke above - ram adjustment above max. 440 mm︱hole in the table 290 x 170 mm︱tool hole in ram Dm. 50 mm︱total power requirement 6,5 - 8,5 kW︱weight of the machine ca. 5,7 t︱dimensions of the machine ca. m︱
          - gear transmission - 3-way bearing shaft - semi-automatic stroke adjustment - circulating oil lubrication - hydr. coupling - separate hydraulics with oil cooler The machine will be partially overhauled as follows: - Dismantling and verification - Connecting rod receives a new bush and is spindled out - new paintwork - new control cabinet with touch panel and ABB safety control - new wiring - Current UVV test with braking time measurement
            pressure 100 t
            throat 300 mm
            stroke 20 - 124 mm
            strokes per minute 60/90
            ram adjustment 85 mm
            table surface area 920 x 600 mm
            ram surface 540 x 290 mm
            daylight, max. stroke above - ra. max. 440 mm
            hole in the table 290 x 170 mm
            tool hole in ram Dm. 50 mm
            total power requirement 6,5 - 8,5 kW
            weight of the machine ca. 5,7 t
            Description :
            - gear transmission
            - 3-way bearing shaft
            - semi-automatic stroke adjustment
            - circulating oil lubrication
            - hydr. coupling
            - separate hydraulics with oil cooler

            The machine will be partially overhauled as follows:
            - Dismantling and verification
            - Connecting rod receives a new bush and is spindled out
            - new paintwork
            - new control cabinet with touch panel and ABB safety control
            - new wiring
            - Current UVV test with braking time measurement
          Datasheet
          Request / Contact
          used Eccentric Press - Single Column HELMERDING ERVH 50 B

          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland
          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-973 · Eccentric Press - Single Column

          HELMERDING - ERVH 50 B - - 1982 -

          Technical details
          pressure 50 t︱throat 250 mm︱stroke 6/98 mm︱ram adjustment 75 mm︱no. of strokes 60 - 90 Hub/min︱table height adjustment 150 mm︱table surface area 700 x 500 mm︱ram surface 400 x 230 mm︱min/max distance table - ram at max. stroke 55/380 mm︱total power requirement kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 0,9 x 1,6 x 2,15 m︱
            pressure 50 t
            throat 250 mm
            stroke 6/98 mm
            ram adjustment 75 mm
            no. of strokes 60 - 90 Hub/min
            table height adjustment 150 mm
            table surface area 700 x 500 mm
            ram surface 400 x 230 mm
            min/max distance table - ram at . 55/380 mm
            weight of the machine ca. 3,5 t
            dimensions of the machine ca. 0,9 x 1,6 x 2,15 m
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   
          Ambold Pressen GmbH 04626 - Schmölln Sommeritzer Straße 43 Deutschland
          Ambold Pressen GmbH

          Sommeritzer Straße 43



          Contact Trader


            Ambold Pressen GmbH
           Sommeritzer Straße 43
            04626 - Schmölln
            Deutschland
            +49 (0)3449183314
            +49 (0)3449123492
            info@ambold-pressen.de
            www.ambold-pressen.de
            Contact person:
           

          Trader Profile



          Machine category


          Bandanlage · Coilanlage · Doppelständerpresse - Hydraulisch · Einständerpresse - Hydraulisch · Exzenterpresse - Doppelständer · Exzenterpresse - Einständer · Haspel · Haspel- und Richtanlage · Konsolfräsmaschine · Profilstahlschere · Richtmaschine · Tafelschere - hydraulisch · Vorschubapparat · Walzenvorschub · Zangenvorschub ·
          Compendium
          Logiciels
          Contenu des machines d'occasion
          Confidentialité
          Suivez-nous
          © 2000-2024, Logotech oHG · Logiciels et services Internet - Tous droits réservés