,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          A + B Werkzeuge Maschinen Handels GmbH - Stockist for used machines

          Machinelist:


          Belt Grinding Machine

          used  Belt Grinding Machine FALKEN R1 150x2280


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-823822 · Belt Grinding Machine

          FALKEN - R1 150x2280 - - -

          Technical details
          width of the strips 150 mm︱band length 2280 mm︱revolutions per minute 2880 U/min︱roll diameter 140 / 80 mm︱table-size 700 x 350 mm︱engine output 3,0 kW︱weight 250 kg︱range L-W-H 1300 x 800 x 1500 mm︱
          Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley
            width of the strips 150 mm
            band length 2280 mm
            revolutions per minute 2880 U/min
            roll diameter 140 / 80 mm
            table-size 700 x 350 mm
            engine output 3,0 kW
            weight 250 kg
            range L-W-H 1300 x 800 x 1500 mm
            Description :
            Furnishing :
            - Horizontal belt grinder
            - Small, flexible all-rounder
            - Solid gray cast iron unit - long-lasting, good grinding results
            - Motorized belt oscillation approx. 10 mm
            - Pneumatic belt tension
            - Small table on the pulley for grinding radii and shapes
            - The entire sanding belt can be used thanks to the height-adjustable work table
            - Including angle and miter fence

            Special equipment included:
            - swiveling grinding unit 90 - 135 degrees
            - Support table on the pulley
          Datasheet
          Request / Contact
          used  Belt Grinding Machine FALKEN BT 114 S


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-823833 · Belt Grinding Machine

          FALKEN - BT 114 S - - -

          Technical details
          width of the strips 50 mm︱band length 940 mm︱band speed 3 - 22 m/min︱turning speeds 1450 U/min︱tube diameter 16 - 114 mm︱radius 180 °︱total power requirement 4,75 kW︱weight of the machine ca. 265 kg.︱range L-W-H 1.000x750x1.300 mm︱
          Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity
            width of the strips 50 mm
            band length 940 mm
            band speed 3 - 22 m/min
            turning speeds 1450 U/min
            tube diameter 16 - 114 mm
            radius 180 °
            total power requirement 4,75 kW
            weight of the machine ca. 265 kg.
            range L-W-H 1.000x750x1.300 mm
            Description :
            Furnishing:
            - stationary pipe belt grinders
            - Automatic material feed with separate drive motor
            - Replacement sanding belts
            - Stepless speed adjustment
            - Manual adjustment of tube tension
            - Polish bent pipes up to 180" (angle).
            - Manual work possible without feed
            - CE mark / declaration of conformity
          Datasheet
          Request / Contact

          Roller tracks / stop systems

          used  Roller tracks / stop systems FALKEN RB 2000x600 - Zufuhr


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8801030 · Roller tracks / stop systems

          FALKEN - RB 2000x600 - Zufuhr - - -

          Technical details
          length 2.000 mm︱height ca. 660 - 815 mm︱width 600 mm︱
          Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 2,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 8 pieces - Roll diameter Ø 90 mm - color blue / red
            length 2.000 mm
            height ca. 660 - 815 mm
            width 600 mm
            Description :
            Furnishing :
            - stable construction
            - high load-stable stability
            - Height-adjustable feet

            techn. Details:
            - Track length: 2,000 mm
            - Roll width: 600 mm
            - Height: approx. 660-815 mm
            - Distance between the rollers: approx. 160 mm
            - Height adjustable: yes
            - Number of rolls: 8 pieces
            - Roll diameter Ø 90 mm
            - color blue / red
          Datasheet
          Request / Contact
          used  Roller tracks / stop systems FALKEN RB 3000x600 - Zufuhr


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8801028 · Roller tracks / stop systems

          FALKEN - RB 3000x600 - Zufuhr - - -

          Technical details
          length 3.000 mm︱height ca. 660 - 815 mm mm︱width 600 mm︱
          Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 3,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 12 pieces - Roll diameter Ø 90 mm - color blue / red
            length 3.000 mm
            height ca. 660 - 815 mm mm
            width 600 mm
            Description :
            Furnishing :
            - stable construction
            - high load-stable stability
            - Height-adjustable feet

            techn. Details:
            - Track length: 3,000 mm
            - Roll width: 600 mm
            - Height: approx. 660-815 mm
            - Distance between the rollers: approx. 160 mm
            - Height adjustable: yes
            - Number of rolls: 12 pieces
            - Roll diameter Ø 90 mm
            - color blue / red
          Datasheet
          Request / Contact

          Tryout Press - hydraulic

          used  Tryout Press - hydraulic FALKEN DPM 1040-80


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8371062 · Tryout Press - hydraulic

          FALKEN - DPM 1040-80 - - -

          Technical details
          pressure 80 t︱stroke 250 mm︱table surface area 1040 x 260 mm︱column travel between the guideways 1040 mm︱ajustment speed 8,0 mm/sec︱working feed 5,0 mm/sec︱return speed 10,0 mm/sec︱engine output 5,5 kW︱weight of the machine ca. 835 kg.︱dimensions of the machine ca. 1810 x 700 x 2100 mm︱
          Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual
            pressure 80 t
            stroke 250 mm
            table surface area 1040 x 260 mm
            column travel between the guidew. 1040 mm
            ajustment speed 8,0 mm/sec
            working feed 5,0 mm/sec
            return speed 10,0 mm/sec
            engine output 5,5 kW
            weight of the machine ca. 835 kg.
            dimensions of the machine ca. 1810 x 700 x 2100 mm
            Description :
            Furnishing:
            - Robust electro-hydraulic workshop press, with fixed cylinder
            - Ideal for aligning axles, shafts, etc.,
            but also for pressing in and out of bolts, bearings, bushings and much more.
            - Robust welded steel construction for high demands
            - Table height adjustment via piston rod
            * including round steel chain and 2x locking bolts
            * Piston rod with metric socket
            - 1x set of V-block prism supports
            - Manometer for pressure display
            - simply constructed hand control with:
            * 1x delivery speed
            * 1x working speed
            * 1x retreat speed
            - Piston can be stopped in any position
            - Hydraulic tank mounted on the side
            - Operation manual
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic FALKEN DPM-K 1070-150


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8371069 · Tryout Press - hydraulic

          FALKEN - DPM-K 1070-150 - - -

          Technical details
          pressure 150 t︱stroke 300 mm︱table surface area 1070 x 290 mm︱column travel between the guideways 1070 mm︱ajustment speed 9,0 mm/sec︱working feed 5,0 mm/sec︱return speed 10,0 mm/sec︱engine output 11,0 kW︱range L-W-H 2200 x 1200 x 2550 mm︱weight of the machine ca. 2070 kg.︱
          Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual
            pressure 150 t
            stroke 300 mm
            table surface area 1070 x 290 mm
            column travel between the guidew. 1070 mm
            ajustment speed 9,0 mm/sec
            working feed 5,0 mm/sec
            return speed 10,0 mm/sec
            engine output 11,0 kW
            range L-W-H 2200 x 1200 x 2550 mm
            weight of the machine ca. 2070 kg.
            Description :
            Furnishing:
            - Robust electro-hydraulic workshop press, with adjustable cylinder
            - Ideal for aligning axles, shafts, etc.,
            but also for pressing in and out of bolts, bearings, bushings and much more.
            - Robust welded steel construction for high demands
            - Table height adjustment via piston rod
            * including round steel chain and 2x locking bolts
            * Piston rod with metric socket
            - 1x set of V-block prism supports
            - Manometer for pressure display
            - simply constructed hand control with:
            * 1x delivery speed
            * 1x working speed
            * 1x retreat speed
            - Piston can be stopped in any position
            - Hydraulic tank mounted on the side
            - Operation manual
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic FALKEN DPM 775/30


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8371060 · Tryout Press - hydraulic

          FALKEN - DPM 775/30 - - -

          Technical details
          pressure 30 t︱stroke 200 mm︱table surface area 775 x 190 mm︱column travel between the guideways 775 mm︱ajustment speed 7,5 mm/sec︱working feed 5,0 mm/sec︱return speed 10,0 mm/sec︱engine output 3,0 kW︱weight of the machine ca. 400 kg.︱dimensions of the machine ca. 1.500 x 700 x 1.800 mm︱
          Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual
            pressure 30 t
            stroke 200 mm
            table surface area 775 x 190 mm
            column travel between the guidew. 775 mm
            ajustment speed 7,5 mm/sec
            working feed 5,0 mm/sec
            return speed 10,0 mm/sec
            engine output 3,0 kW
            weight of the machine ca. 400 kg.
            dimensions of the machine ca. 1.500 x 700 x 1.800 mm
            Description :
            Furnishing:
            - Robust electro-hydraulic workshop press, with fixed cylinder
            - Ideal for aligning axles, shafts, etc.,
            but also for pressing in and out of bolts, bearings, bushings and much more.
            - Robust welded steel construction for high demands
            - Table height adjustment via piston rod
            * including round steel chain and 2x locking bolts
            * Piston rod with metric socket
            - 1x set of V-block prism supports
            - Manometer for pressure display
            - simply constructed hand control with:
            * 1x delivery speed
            * 1x working speed
            * 1x retreat speed
            - Piston can be stopped in any position
            - Hydraulic tank mounted on the side
            - Operation manual
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic FALKEN DPM-K 1070-100


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8371065 · Tryout Press - hydraulic

          FALKEN - DPM-K 1070-100 - - -

          Technical details
          pressure 100 t︱stroke 300 mm︱table surface area 1070 x 315 mm︱column travel between the guideways 1070 mm︱ajustment speed 8,0 mm/sec︱working feed 5,0 mm/sec︱return speed 10,0 mm/sec︱oil volume 90,0 l︱engine output 5,5 kW︱weight of the machine ca. 1.870 kg.︱dimensions of the machine ca. 2.050 x 1.000 x 2.200 mm︱
          Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual
            pressure 100 t
            stroke 300 mm
            table surface area 1070 x 315 mm
            column travel between the guidew. 1070 mm
            ajustment speed 8,0 mm/sec
            working feed 5,0 mm/sec
            return speed 10,0 mm/sec
            oil volume 90,0 l
            engine output 5,5 kW
            weight of the machine ca. 1.870 kg.
            dimensions of the machine ca. 2.050 x 1.000 x 2.200 mm
            Description :
            Furnishing:
            - Robust electro-hydraulic workshop press, with adjustable cylinder
            - Ideal for aligning axles, shafts, etc.,
            but also for pressing in and out of bolts, bearings, bushings and much more.
            - Robust welded steel construction for high demands
            - Table height adjustment via piston rod
            * including round steel chain and 2x locking bolts
            * Piston rod with metric socket
            - 1x set of V-block prism supports
            - Manometer for pressure display
            - simply constructed hand control with:
            * 1x delivery speed
            * 1x working speed
            * 1x retreat speed
            - Piston can be stopped in any position
            - Hydraulic tank mounted on the side
            - Operation manual
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic FALKEN DPM 1040-60


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8371061 · Tryout Press - hydraulic

          FALKEN - DPM 1040-60 - - -

          Technical details
          pressure 60 t︱stroke 250 mm︱table surface area 1040 x 370 (315) mm︱column travel between the guideways 1040 mm︱ajustment speed 8,0 mm/sec︱working feed 4,0 mm/sec︱return speed 10,0 mm/sec︱engine output 4,0 kW︱weight of the machine ca. 800 kg.︱dimensions of the machine ca. 1.700 x 700 x 2.100 mm︱
          Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual
            pressure 60 t
            stroke 250 mm
            table surface area 1040 x 370 (315) mm
            column travel between the guidew. 1040 mm
            ajustment speed 8,0 mm/sec
            working feed 4,0 mm/sec
            return speed 10,0 mm/sec
            engine output 4,0 kW
            weight of the machine ca. 800 kg.
            dimensions of the machine ca. 1.700 x 700 x 2.100 mm
            Description :
            Furnishing:
            - Robust electro-hydraulic workshop press, with fixed cylinder
            - Ideal for aligning axles, shafts, etc.,
            but also for pressing in and out of bolts, bearings, bushings and much more.
            - Robust welded steel construction for high demands
            - Table height adjustment via piston rod
            * including round steel chain and 2x locking bolts
            * Piston rod with metric socket
            - 1x set of V-block prism supports
            - Manometer for pressure display
            - simply constructed hand control with:
            * 1x delivery speed
            * 1x working speed
            * 1x retreat speed
            - Piston can be stopped in any position
            - Hydraulic tank mounted on the side
            - Operation manual
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic FALKEN DPM 1070-150


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8371064 · Tryout Press - hydraulic

          FALKEN - DPM 1070-150 - - -

          Technical details
          pressure 150 t︱stroke 300 mm︱table surface area 1070 x 290 mm︱column travel between the guideways 1070 mm︱ajustment speed 9,0 mm/sec︱working feed 5,0 mm/sec︱return speed 10,0 mm/sec︱engine output 11,0 kW︱range L-W-H 2200 x 1300 x 2300 mm︱weight of the machine ca. 1870 kg.︱
          Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual
            pressure 150 t
            stroke 300 mm
            table surface area 1070 x 290 mm
            column travel between the guidew. 1070 mm
            ajustment speed 9,0 mm/sec
            working feed 5,0 mm/sec
            return speed 10,0 mm/sec
            engine output 11,0 kW
            range L-W-H 2200 x 1300 x 2300 mm
            weight of the machine ca. 1870 kg.
            Description :
            Furnishing:
            - Robust electro-hydraulic workshop press, with fixed cylinder
            - Ideal for aligning axles, shafts, etc.,
            but also for pressing in and out of bolts, bearings, bushings and much more.
            - Robust welded steel construction for high demands
            - Table height adjustment via piston rod
            * including round steel chain and 2x locking bolts
            * Piston rod with metric socket
            - 1x set of V-block prism supports
            - Manometer for pressure display
            - simply constructed hand control with:
            * 1x delivery speed
            * 1x working speed
            * 1x retreat speed
            - Piston can be stopped in any position
            - Hydraulic tank mounted on the side
            - Operation manual
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic FALKEN DK 1900-200


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8371066 · Tryout Press - hydraulic

          FALKEN - DK 1900-200 - - -

          Technical details
          pressure 200 t︱stroke 300 mm︱table surface area 1900 x 440 mm︱column travel between the guideways 1900 mm︱working feed 5,0 mm/sec︱engine output 15,0 kW︱weight of the machine ca. 4.800 kg.︱range L-W-H 2.570 x 1.665 x 2.860 mm︱
          Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual
            pressure 200 t
            stroke 300 mm
            table surface area 1900 x 440 mm
            column travel between the guidew. 1900 mm
            working feed 5,0 mm/sec
            engine output 15,0 kW
            weight of the machine ca. 4.800 kg.
            range L-W-H 2.570 x 1.665 x 2.860 mm
            Description :
            Furnishing:
            - Robust electro-hydraulic workshop press, with adjustable cylinder
            - Ideal for aligning axles, shafts, etc.,
            but also for pressing in and out of bolts, bearings, bushings and much more.
            - Robust welded steel construction for high demands
            - Table height adjustment via piston rod
            * including round steel chain and 2x locking bolts
            * Piston rod with metric socket
            - 1x set of V-block prism supports
            - Manometer for pressure display
            - simply constructed hand control with:
            * 1x delivery speed
            * 1x working speed
            * 1x retreat speed
            - Piston can be stopped in any position
            - Hydraulic tank mounted on the side
            - Operation manual
          Datasheet
          Request / Contact
          used  Tryout Press - hydraulic FALKEN DPM 1070-100


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8371063 · Tryout Press - hydraulic

          FALKEN - DPM 1070-100 - - -

          Technical details
          pressure 100 t︱stroke 300 mm︱table surface area 1070 x 260 mm︱column travel between the guideways 1070 mm︱ajustment speed 8,0 mm/sec︱working feed 5,0 mm/sec︱return speed 10,0 mm/sec︱oil volume 90,0 l︱engine output 5,5 kW︱dimensions of the machine ca. 2050 x 1000 x 2200 mm︱weight of the machine ca. 1500 kg.︱
          Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual
            pressure 100 t
            stroke 300 mm
            table surface area 1070 x 260 mm
            column travel between the guidew. 1070 mm
            ajustment speed 8,0 mm/sec
            working feed 5,0 mm/sec
            return speed 10,0 mm/sec
            oil volume 90,0 l
            engine output 5,5 kW
            dimensions of the machine ca. 2050 x 1000 x 2200 mm
            weight of the machine ca. 1500 kg.
            Description :
            Furnishing:
            - Robust electro-hydraulic workshop press, with fixed cylinder
            - Ideal for aligning axles, shafts, etc.,
            but also for pressing in and out of bolts, bearings, bushings and much more.
            - Robust welded steel construction for high demands
            - Table height adjustment via piston rod
            * including round steel chain and 2x locking bolts
            * Piston rod with metric socket
            - 1x set of V-block prism supports
            - Manometer for pressure display
            - simply constructed hand control with:
            * 1x delivery speed
            * 1x working speed
            * 1x retreat speed
            - Piston can be stopped in any position
            - Hydraulic tank mounted on the side
            - Operation manual
          Datasheet
          Request / Contact

          Notching Machine

          used  Notching Machine FALKEN PN 60 - 2


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8392012 · Notching Machine

          FALKEN - PN 60 - 2 - - -

          Technical details
          plate thickness 2,0 mm︱tube diameter 60,0 mm︱motor 400 Volt︱
            plate thickness 2,0 mm
            tube diameter 60,0 mm
            motor 400 Volt
          Datasheet
          Request / Contact

          Plate Bending Machine - 3 Rolls

          used  Plate Bending Machine - 3 Rolls FALKEN IR 1050 x 75 motor.


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8405563 · Plate Bending Machine - 3 Rolls

          FALKEN - IR 1050 x 75 motor. - - -

          Technical details
          sheet width 1050 mm︱plate thickness 2,0 mm︱roll length 1050 mm︱roll diam. toproll 75,0 mm︱engine output 1,5 kW︱weight 385 kg︱range L-W-H 1610 x 700 x 1160 mm︱
          Furnishing: - motor-driven asymmetrical 3-roller bending machine - hardened rollers - Manual folding storage for quick removal of the workpiece - Profile inlets i.d. rolls - Double foot switch for R/L run and emergency stop button - rear roller manually adjustable - electr. safety device - Profile grooves : 4/6/10 mm
            sheet width 1050 mm
            plate thickness 2,0 mm
            roll length 1050 mm
            roll diam. toproll 75,0 mm
            engine output 1,5 kW
            weight 385 kg
            range L-W-H 1610 x 700 x 1160 mm
            Description :
            Furnishing:
            - motor-driven asymmetrical 3-roller bending machine
            - hardened rollers
            - Manual folding storage for quick removal of the workpiece
            - Profile inlets i.d. rolls
            - Double foot switch for R/L run and emergency stop button
            - rear roller manually adjustable
            - electr. safety device
            - Profile grooves : 4/6/10 mm
          Datasheet
          Request / Contact
          used  Plate Bending Machine - 3 Rolls FALKEN R 1270 x 75


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8405561 · Plate Bending Machine - 3 Rolls

          FALKEN - R 1270 x 75 - - -

          Technical details
          sheet width 1270 mm︱plate thickness 1,50 mm︱roll length 1270 mm︱roll diam. toproll 75,0 mm︱engine output manuell kW︱weight 330 kg︱range L-W-H 2150 x 700 x 1160 mm︱
          Furnishing: - manual asymmetrical 3-roll roll bending machine with manual drive - manual folding stock - manual delivery d. rear roller - Profile grooves : 4/6/10 mm
            sheet width 1270 mm
            plate thickness 1,50 mm
            roll length 1270 mm
            roll diam. toproll 75,0 mm
            engine output manuell kW
            weight 330 kg
            range L-W-H 2150 x 700 x 1160 mm
            Description :
            Furnishing:
            - manual asymmetrical 3-roll roll bending machine with manual drive
            - manual folding stock
            - manual delivery d. rear roller
            - Profile grooves : 4/6/10 mm
          Datasheet
          Request / Contact
          used  Plate Bending Machine - 3 Rolls FALKEN RM 1550 x 90 motor.


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8405557 · Plate Bending Machine - 3 Rolls

          FALKEN - RM 1550 x 90 motor. - - -

          Technical details
          sheet width 1550 mm︱plate thickness 2,0 mm︱roll diam. toproll 90,0 mm︱engine output 1,5 kW︱bending speed 6,0 m/min︱weight 580 kg︱range L-W-H 2130 x 1200 x 700 mm︱
          Furnishing: - motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Safety device
            sheet width 1550 mm
            plate thickness 2,0 mm
            roll diam. toproll 90,0 mm
            engine output 1,5 kW
            bending speed 6,0 m/min
            weight 580 kg
            range L-W-H 2130 x 1200 x 700 mm
            Description :
            Furnishing:
            - motor-driven asymmetrical 3-roll round bending machine
            - hardened rollers
            - manual folding warehouse for quick removal of the workpiece
            - Profile inlets i.d. Rollers
            - Double foot switch for R / L run and emergency stop button
            - Conical bending device
            - rear roller manually adjustable
            - electr. Safety device
          Datasheet
          Request / Contact
          used  Plate Bending Machine - 3 Rolls FALKEN RS 1550 x 90


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8405562 · Plate Bending Machine - 3 Rolls

          FALKEN - RS 1550 x 90 - - -

          Technical details
          sheet width 1550 mm︱plate thickness 2,0 mm︱roll length 1550 mm︱roll diam. toproll 90,0 mm︱engine output manuell kW︱weight 560 kg︱range L-W-H 2580 x 700 x 1250 mm︱
          Furnishing: - manual asymmetrical 3-roll round bending machine with hand drive - manual folding warehouse - manual delivery d. rear roller - Profile grooves: 4/6/9 mm
            sheet width 1550 mm
            plate thickness 2,0 mm
            roll length 1550 mm
            roll diam. toproll 90,0 mm
            engine output manuell kW
            weight 560 kg
            range L-W-H 2580 x 700 x 1250 mm
            Description :
            Furnishing:
            - manual asymmetrical 3-roll round bending machine with hand drive
            - manual folding warehouse
            - manual delivery d. rear roller
            - Profile grooves: 4/6/9 mm
          Datasheet
          Request / Contact
          used  Plate Bending Machine - 3 Rolls FALKEN RM 1270 x 90 motor.


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8405518 · Plate Bending Machine - 3 Rolls

          FALKEN - RM 1270 x 90 motor. - - -

          Technical details
          sheet width 1270 mm︱plate thickness 2,5 mm︱roll length 1270 mm︱roll diam. toproll 90,0 mm︱engine output 1,1 kW︱bending speed 6,0 m/min︱weight 520 kg︱
          Furnishing: - motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Safety device
            sheet width 1270 mm
            plate thickness 2,5 mm
            roll length 1270 mm
            roll diam. toproll 90,0 mm
            engine output 1,1 kW
            bending speed 6,0 m/min
            weight 520 kg
            Description :
            Furnishing:
            - motor-driven asymmetrical 3-roll round bending machine
            - hardened rollers
            - manual folding warehouse for quick removal of the workpiece
            - Profile inlets i.d. Rollers
            - Double foot switch for R / L run and emergency stop button
            - Conical bending device
            - rear roller manually adjustable
            - electr. Safety device
          Datasheet
          Request / Contact
          used  Plate Bending Machine - 3 Rolls FALKEN R 1050 x 68


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8405560 · Plate Bending Machine - 3 Rolls

          FALKEN - R 1050 x 68 - - -

          Technical details
          sheet width 1050 mm︱plate thickness 1,50 mm︱roll length 1050 mm︱roll diam. toproll 68,0 mm︱engine output manuell kW︱weight 280 kg︱range L-W-H 1930 x 700 x 1160 mm︱
          Furnishing: - manual asymmetrical 3-roll roll bending machine with manual drive - manual folding stock - manual delivery d. rear roller - Profile grooves : 4/6/10 mm
            sheet width 1050 mm
            plate thickness 1,50 mm
            roll length 1050 mm
            roll diam. toproll 68,0 mm
            engine output manuell kW
            weight 280 kg
            range L-W-H 1930 x 700 x 1160 mm
            Description :
            Furnishing:
            - manual asymmetrical 3-roll roll bending machine with manual drive
            - manual folding stock
            - manual delivery d. rear roller
            - Profile grooves : 4/6/10 mm
          Datasheet
          Request / Contact

          Plate Bending Machine - 4 Rolls

          used  Plate Bending Machine - 4 Rolls FALKEN 4 R HMS 1550 x 150


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8405521 · Plate Bending Machine - 4 Rolls

          FALKEN - 4 R HMS 1550 x 150 - - -

          Technical details
          sheet width 1550 mm︱plate thickness 6,5 mm︱pre-bending 4,5 mm︱diameter of upper rolls 150 mm︱side roll diameter 130 mm︱diameter of lower rolls 150 mm︱distance max. OW zu UW 20,0 mm︱total power requirement 2,2 + 1,5 kW︱weight of the machine ca. 2.370 kg.︱range L-W-H 3.300 x 1.200 x 1.300 mm︱
          Furnishing: - hydraulic 4-roll bending machine - separate control panel - hardened rolls SAE 1050 CK 45 - Conical bending device - 3 digital displays for exact roller positions - hydraulic folding storage
            sheet width 1550 mm
            plate thickness 6,5 mm
            pre-bending 4,5 mm
            diameter of upper rolls 150 mm
            side roll diameter 130 mm
            diameter of lower rolls 150 mm
            distance max. OW zu UW 20,0 mm
            total power requirement 2,2 + 1,5 kW
            weight of the machine ca. 2.370 kg.
            range L-W-H 3.300 x 1.200 x 1.300 mm
            Description :
            Furnishing:
            - hydraulic 4-roll bending machine
            - separate control panel
            - hardened rolls SAE 1050 CK 45
            - Conical bending device
            - 3 digital displays for exact roller positions
            - hydraulic folding storage
          Datasheet
          Request / Contact

          axle stand

          used  axle stand FALKEN SLB 5 to. / 500 mm


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8801025 · axle stand

          FALKEN - SLB 5 to. / 500 mm - - -

          Technical details
          0 5.000 kg︱height 500 mm︱width 1200 mm︱
          Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg
            0 5.000 kg
            height 500 mm
            width 1200 mm
            Description :
            Furnishing :
            - stable construction
            - high load-stable stability
            - powder-coated in RAL 5010 gentian blue
            - CE marking

            techn. Details:
            - Height: 500 mm
            - Width: 1200 mm
            - Load capacity: 5 to
            - Height adjustable: no
            - Support surface: 1200 x 100 mm
            - Space requirement approx .: 1.2 x 0.8 x 0.8 m
            - Weight approx. 35 kg
          Datasheet
          Request / Contact
          used  axle stand FALKEN SLB 2 to. / 500 mm


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8801027 · axle stand

          FALKEN - SLB 2 to. / 500 mm - - -

          Technical details
          0 2.000 kg︱height 500 mm︱width 1200 mm︱
          Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg
            0 2.000 kg
            height 500 mm
            width 1200 mm
            Description :
            Furnishing :
            - stable construction
            - high load-stable stability
            - powder-coated in RAL 5010 gentian blue
            - CE marking

            techn. Details:
            - Height: 500 mm
            - Width: 1200 mm
            - Load capacity: 2 to
            - Height adjustable: no
            - Support surface: 1200 x 100 mm
            - Space requirement approx .: 1.2 x 0.8 x 0.8 m
            - Weight approx. 20 kg
          Datasheet
          Request / Contact
          used  axle stand FALKEN SLB 15 to. / 1350 mm


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8801023 · axle stand

          FALKEN - SLB 15 to. / 1350 mm - - -

          Technical details
          0 15.000 kg︱height 790-1350 mm︱width 1200 mm︱weight ~ 65,0 kg︱
          Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm
            0 15.000 kg
            height 790-1350 mm
            width 1200 mm
            weight ~ 65,0 kg
            Description :
            Furnishing :
            - stable construction
            - high load-stable stability
            - powder-coated in RAL 5010 gentian blue
            - with height adjustment
            - CE marking

            techn. Details:
            - Height: 790 mm
            - Width: 1200 mm
            - Load capacity: 15 to
            - Height adjustment: 790 - 1350 mm
            - Support surface: 120 x 120mm
            - Space requirement approx .: 1350 x 720 x 1350 mm
          Datasheet
          Request / Contact
          used  axle stand FALKEN SLB 5 to. / 800 mm


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8801024 · axle stand

          FALKEN - SLB 5 to. / 800 mm - - -

          Technical details
          0 5.000 kg︱height 800 mm︱width 1200 mm︱
          Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg
            0 5.000 kg
            height 800 mm
            width 1200 mm
            Description :
            Furnishing :
            - stable construction
            - high load-stable stability
            - powder-coated in RAL 5010 gentian blue
            - CE marking

            techn. Details:
            - Height: 800 mm
            - Width: 1200 mm
            - Load capacity: 5 to
            - Height adjustable: no
            - Support surface: 1200 x 100 mm
            - Space requirement approx .: 1.2 x 0.8 x 0.8 m
            - Weight approx. 60 kg
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Profil de commerçant: A + B Werkzeuge Maschinen Handels GmbH

          Contacter le commerçant



            A + B Outils Maschinen Handels GmbH
           Rottweg 17
            48683 - Ahaus
            Allemagne
            (0049)-2561-9384-71">(0049)-2561-9384-71
            (0049) -2561-9384-36
            info@ab-maschinen.de
            www.ab-maschinen.de

          Profil de commerçant




          A + B Werkzeuge Maschinen Handels GmbH   48683 - Ahaus Rottweg 17 Deutschland
          A + B Werkzeuge Maschinen Handels GmbH

          Rottweg 17



          Contact Trader


            A + B Werkzeuge Maschinen Handels GmbH
           Rottweg 17
            48683 - Ahaus
            Deutschland
            (0049)-2561-9384-71
            (0049)-2561-9384-36
            info@ab-maschinen.de
            www.ab-maschinen.de
            Contact person:

           
          * über 500 Maschinen lagernd -

          Gerne führen wir Ihnen Ihre gewünschte Maschine unter Strom vor *




          Machine category


          · Abkantpresse - hydraulisch · Abkantpresse - mechanisch · Abkantwerkzeuge · Alu-Kreissäge · Aufspanntisch · Ausklinkmaschine · Bandschleifmaschine · Bandsäge · Bandsäge - Vertikal · Behälterdrehvorrichtung · Betonstahlbiegemaschine · Bettfräsmaschine - Universal · Biegemaschine horizontal · Bohr- und Fräsmaschine · Breitband-Schleifmaschine · Bügelsäge · Doppelschleifbock · Dornpresse · Drehmaschine-konventionell-elektronisch · Dreiwalzen - Blechbiegemaschine · Entgratmaschine · Exzenterpresse - Einständer · Flachschleifmaschine · Fräseinrichtung · Fräsmaschine - Universal · Gabelhubwagen - von Hand · Gewindeschneidmaschine · Handspindelpresse · Kaltkreissäge · Kippvorrichtung · Kompressor · Koordinatenbohrmaschine · Krananlage · Kreuztisch · Laserschneidmaschine · Lochstanze · Plasmaschneidegerät · Polierbock · Profilstahlschere · Punktschweißmaschine · Radialbohrmaschine · Reihenbohrmaschine · Ring- Profil- Biegemaschine · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Rollenbock · Sandstrahlanlage · Scherenhubtisch · Schnellradialbohrmaschine · Schraubstock · Schubladenschrank · Schweißanlage · Schweißdrehtisch · Schweißrauchabsaugung · Schwenkbiegemaschine · Sickenmaschine · Säulenbohrmaschine · Säulenschwenkkran · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Unterstellbock · Vakuum-Lifter · Vierwalzen - Blechbiegemaschine · Werkbänke · Werkstattpresse - hydraulisch · Zubehör ·