,
Réseau européen de revendeurs de machines de stockage
+49 (0) 2389 5299080
Service de recherche Vendre des machines d'occasion

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:
             Vue: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          A + B Werkzeuge Maschinen Handels GmbH - Stockist for used machines

          Machinelist:

          Hydr. pressbrake

          used Hydr. pressbrake AMADA HFE 100.3

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308373 · Hydr. pressbrake

          AMADA - HFE 100.3 - - 2002 -

          Technical details
          pressure 100 t︱chamfer lenght 3140 mm︱distance between columns 2700 mm︱column arm 420 mm︱dayligth 470 mm︱stroke 200 mm︱ajustment speed 100 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱table width 60.0 mm︱table height 960 mm︱oil volume 150 L︱0 300 bar︱controlled axis 8 Anzahl︱Number of working hours 47.800 h︱total power requirement 12.5 KW︱weight of the machine ca. 7150 kg︱range L-W-H 4295 x 2285 x 2635 mm︱
          ** maintained condition (!!) ** with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left * Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) * Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) * Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308373
            pressure 100 t
            chamfer lenght 3140 mm
            distance between columns 2700 mm
            column arm 420 mm
            dayligth 470 mm
            stroke 200 mm
            ajustment speed 100 mm/sec
            working feed 10.0 mm/sec
            return speed 100 mm/sec
            table width 60.0 mm
            table height 960 mm
            oil volume 150 L
            0 300 bar
            controlled axis 8 Anzahl
            Number of working hours 47.800 h
            total power requirement 12.5 KW
            weight of the machine ca. 7150 kg
            range L-W-H 4295 x 2285 x 2635 mm
            Description :
            ** maintained condition (!!)
            ** with approx. 47.800 operating hours

            Furnishing:
            - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2)
            * swiveling operation - front left
            * Tool & program library
            - CNC-controlled back gauge adjustment (X1+X2 axis)
            * Adjustment range .. 700 mm
            - CNC-controlled vertical adjustment of the stop fingers (R1+R2)
            * Adjustment range .. 250 mm
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - Hand control device for manual movement of the axes
            - AMADA manual upper tool clamping system
            - 1x freely movable foot switch
            - side protection device (pivoting doors)
            - rear protection device (pivoting door)
            - EMERGENCY stop button at the front
            - CE marking
            - original instruction manual

            * Special accessories included:
            - 1x brand new ROLLERI upper tool set (divided)
            * TYPE PS.135.85.R08
            - 1x brand new ROLLERI lower tool set (divided)
            * TYPE M.460.R

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308373
          Datasheet
          Request / Contact
          used Hydr. pressbrake AMADA HFE 50-20

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308383 · Hydr. pressbrake

          AMADA - HFE 50-20 - - 2000 -

          Technical details
          pressure 50.0 t︱chamfer lenght 2090 mm︱distance between columns 1665 mm︱column arm 400 mm︱table width 60,0 mm︱ajustment speed 100 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱stroke 200 mm︱table height 910 mm︱dayligth 470 mm︱Number of working hours 27.900 h︱total power requirement 6.0 KW︱weight of the machine ca. 4850 kg︱range L-W-H 3458 x 2450 x 2450 mm︱
          ** maintained condition (!!) ** with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) * incl. SICK safety device - light barrier - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308383 * Machinevideo : https://www.youtube.com/watch?v=lzJmJ7FbpO4
            pressure 50.0 t
            chamfer lenght 2090 mm
            distance between columns 1665 mm
            column arm 400 mm
            table width 60,0 mm
            ajustment speed 100 mm/sec
            working feed 10.0 mm/sec
            return speed 100 mm/sec
            stroke 200 mm
            table height 910 mm
            dayligth 470 mm
            Number of working hours 27.900 h
            total power requirement 6.0 KW
            weight of the machine ca. 4850 kg
            range L-W-H 3458 x 2450 x 2450 mm
            Description :
            ** maintained condition (!!)
            ** with only approx. 27.900 operating hours

            Furnishing:
            - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2)
            * swiveling operation - front left
            - CNC-controlled back gauge adjustment (X1+X2)
            - CNC-controlled vertical adjustment of the stop fingers (R1+R2)
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - Hand control device for manual movement of the axes
            - AMADA manual upper tool clamping system
            - 1x freely movable foot switch
            - side protection device (pivoting doors)
            * incl. SICK safety device - light barrier
            - rear protection device (pivoting door)
            - EMERGENCY stop button at the front
            - CE marking
            - original instruction manual

            * Special accessories included:
            - 1x brand new ROLLERI upper tool set (divided)
            * TYPE PS.135.85.R08
            - 1x brand new ROLLERI lower tool set (divided)
            * TYPE M.460.R

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308383

            * Machinevideo :
            https://www.youtube.com/watch?v=lzJmJ7FbpO4
          Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Plate Shear - Hydraulic AMADA GPX 630

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325317 · Plate Shear - Hydraulic

          AMADA - GPX 630 - - 1995 - AMADA

          Technical details
          sheet width 3050 mm︱plate thickness 6,35 mm︱thickness at "Niro-steel" 4,0 mm︱down holder 16 Stück︱table length 575 mm︱Control AMADA ︱cutting angle 40° - 2°20 °︱0 305 bar︱oil volume 100 ltr.︱total power requirement 5,5 kW︱weight of the machine ca. 6150 kg︱range L-W-H 3790 x 2090 x 1860 mm︱
          ** maintained condition (!!) Furnishing: - AMADA NC control, swiveling control panel at the front left - Electric back stop, NC controlled - electrical/hydraulic cutting angle adjustment - electrical/hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the scribe line * Shear cutting after visual outline - 1x long side stop - 1x long support arms - Safety device behind the machine - 1x freely movable foot switch - Clippings waste container - original instruction manual ** Special accessories: - AMADA electro-pneumatic sheet metal holding device for thin sheet metal blanks
            sheet width 3050 mm
            plate thickness 6,35 mm
            thickness at "Niro-steel" 4,0 mm
            down holder 16 Stück
            table length 575 mm
            Control AMADA
            cutting angle 40° - 2°20 °
            0 305 bar
            oil volume 100 ltr.
            total power requirement 5,5 kW
            weight of the machine ca. 6150 kg
            range L-W-H 3790 x 2090 x 1860 mm
            Description :
            ** maintained condition (!!)

            Furnishing:
            - AMADA NC control, swiveling control panel at the front left
            - Electric back stop, NC controlled
            - electrical/hydraulic cutting angle adjustment
            - electrical/hydraulic cutting gap adjustment
            - Sighting device & cutting line lighting to view the scribe line
            * Shear cutting after visual outline
            - 1x long side stop
            - 1x long support arms
            - Safety device behind the machine
            - 1x freely movable foot switch
            - Clippings waste container
            - original instruction manual

            ** Special accessories:
            - AMADA electro-pneumatic sheet metal holding device for thin sheet metal blanks
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Profil de commerçant: A + B Werkzeuge Maschinen Handels GmbH

          Contacter le commerçant



            A + B Outils Maschinen Handels GmbH
           Rottweg 17
            48683 - Ahaus
            Deutschland
            (0049)-2561-9384-71">(0049)-2561-9384-71
            (0049) -2561-9384-36
            info@ab-maschinen.de
            www.ab-maschinen.de

          Profil de commerçant



          A + B Werkzeuge Maschinen Handels GmbH 48683 - Ahaus Rottweg 17 Deutschland
          A + B Werkzeuge Maschinen Handels GmbH

          Rottweg 17



          Contact Trader


            A + B Werkzeuge Maschinen Handels GmbH
           Rottweg 17
            48683 - Ahaus
            Deutschland
            (0049)-2561-9384-71
            (0049)-2561-9384-36
            info@ab-maschinen.de
            www.ab-maschinen.de
            Contact person:
           
          * über 500 Maschinen lagernd -

          Gerne führen wir Ihnen Ihre gewünschte Maschine unter Strom vor *

          Trader Profile



          Machine category


          · Abkantpresse - hydraulisch · Abkantpresse - mechanisch · Abkantwerkzeuge · Alu-Kreissäge · Aufspanntisch · Ausklinkmaschine · Bandschleifmaschine · Bandsäge · Bandsäge - Vertikal · Behälterdrehvorrichtung · Betonstahlbiegemaschine · Bettfräsmaschine - Universal · Biegemaschine horizontal · Bohr- und Fräsmaschine · Breitband-Schleifmaschine · Bügelsäge · Doppelschleifbock · Dornpresse · Drehmaschine-konventionell-elektronisch · Dreiwalzen - Blechbiegemaschine · Entgratmaschine · Exzenterpresse - Einständer · Flachschleifmaschine · Fräseinrichtung · Fräsmaschine - Universal · Gabelhubwagen - von Hand · Gewindeschneidmaschine · Handspindelpresse · Kaltkreissäge · Kippvorrichtung · Kompressor · Koordinatenbohrmaschine · Krananlage · Kreuztisch · Laserschneidmaschine · Lochstanze · Plasmaschneidegerät · Polierbock · Profilstahlschere · Punktschweißmaschine · Radialbohrmaschine · Reihenbohrmaschine · Ring- Profil- Biegemaschine · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Rollenbock · Sandstrahlanlage · Scherenhubtisch · Schnellradialbohrmaschine · Schraubstock · Schubladenschrank · Schweißanlage · Schweißdrehtisch · Schweißrauchabsaugung · Schwenkbiegemaschine · Sickenmaschine · Säulenbohrmaschine · Säulenschwenkkran · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Transportwagen · Unterstellbock · Vakuum-Lifter · Vierwalzen - Blechbiegemaschine · Waschanlage - Kammer · Werkbänke · Werkstattpresse - hydraulisch · Zubehör ·
          Compendium
          Logiciels
          Contenu des machines d'occasion
          Confidentialité
          Suivez-nous
          © 2000-2024, Logotech oHG · Logiciels et services Internet - Tous droits réservés