,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Container

          Machinelist: Container


          Cleaning unit

          used Other attachments Cleaning unit DIBO CT80 BT 70


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7233 · Cleaning unit

          DIBO - CT80 BT 70 - - 2020 -

          Technical details
          sweeping width 942 mm︱working width Bodendüse: 700 mm︱tank Reinigung: 79 l︱tank Schmutzwasser: 83 l︱weight of the machine ca. 145 kg︱dimensions of the machine ca. 1,32 x 0,7 x 1,1 m︱
          - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft
            sweeping width 942 mm
            working width Bodendüse: 700 mm
            tank Reinigung: 79 l
            tank Schmutzwasser: 83 l
            weight of the machine ca. 145 kg
            dimensions of the machine ca. 1,32 x 0,7 x 1,1 m
            Description :
            - Exhibition machine and demonstration machine, like new-

            - Most compact ride-on scrubber-dryer from DiBO with 2 brushes
            - Possibility to dispense detergent: in ECO mode with constant
            Saving or automatic regulation of the machine depending on the speed of the
            machine
            Brush motors and suction: even less energy consumption, even more
            Smoothness
            - Display: large, multilingual, including hour counter, battery level
            and work programs
            - Memory card: allows the storage of battery charge cycles and
            Power consumption of the motor
            - CFS system: water distribution from the middle of the brush to avoid waste
            Avoid cleaning solution
            - SLS system: self-leveling electronic system to keep the brush
            always lies perfectly on the floor
            - EDD system: suction cup for the best results during drying and during
            Area performance was developed
            - Wheels: oil resistant
            - Extraction: 2 levels with fans and stainless steel shaft


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit Vorwerk Flaechenwaescher


          • G. FOLMER Industriebedarf
          • Mangenbergerstr. 347
          • 42655 Solingen
          • Deutschland

          • +49 21241071
            +49 21241276
          • folmer.maschinen@t-online.de
          #2010-592 · Cleaning unit

          Vorwerk - Flaechenwaescher - - 2019 -

          Technical details
          total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱


        • G. FOLMER Industriebedarf
        • Mangenbergerstr. 347
        • 42655 Solingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit HEIN HESO Compo 1020 WST


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-975 · Cleaning unit

          HEIN HESO - Compo 1020 WST - - 2016 -

          Technical details
          dimension 3.709 x 1.744 x 1.942 mm︱loading height 1.002 mm︱weight 1.332 kg︱tank capacity 600 l︱through-put width 307 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            dimension 3.709 x 1.744 x 1.942 mm
            loading height 1.002 mm
            weight 1.332 kg
            tank capacity 600 l
            through-put width 307 mm


        • Aleman Machines e.K.
        • Am Mühlweg 1
        • 73466 Lauchheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit DEBUS DES 119


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6585 · Cleaning unit

          DEBUS - DES 119 - - 2013 -

          Technical details
          6,0 m3/min︱rated current 9 A︱total power requirement 2,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          swarf cleaner
            6,0 m3/min
            rated current 9 A
            total power requirement 2,5 kW
            Description :
            swarf cleaner


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit HAKO HAKOMAT B70 CLHM


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S592 · Cleaning unit

          HAKO - HAKOMAT B70 CLHM - - 2013 -

          Technical details
          total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            total power requirement / kW
            weight of the machine ca. / t
            required space / m


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit TENNANT Tennant 7100


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6754 · Cleaning unit

          TENNANT - Tennant 7100 - - 2009 (2021) -

          Technical details
          sweeping width 800 inkl.Seitenb.︱container volume 114 l︱total power requirement 3,0 kW︱ 2759 m²/h︱ max. 5232 m²/h︱
          Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!
            sweeping width 800 inkl.Seitenb.
            container volume 114 l
            total power requirement 3,0 kW
            2759 m²/h
            max. 5232 m²/h
            Description :
            Sweeper - scrubber dryer
            Operating hours: approx. 400 hours
            incl. 4x brush + charger

            including new battery pack (consisting of 6x gel battery) !!


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit JETO EUROCLEAN


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4963 · Cleaning unit

          JETO - EUROCLEAN - - 2000 -

          Technical details
          temperature 80/130 °C︱0 100 kg︱filling capacity 750 l︱basket dimensions 670x480 mm︱number 25 ︱total power requirement 43 kW︱weight of the machine ca. 890 kg︱dimensions of the machine ca. 185x190x150 cm︱
            temperature 80/130 °C
            0 100 kg
            filling capacity 750 l
            basket dimensions 670x480 mm
            number 25
            total power requirement 43 kW
            weight of the machine ca. 890 kg
            dimensions of the machine ca. 185x190x150 cm


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Other attachments Cleaning unit Kohlhoff Hygienetechnik Sailer SSR-1


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-LS7007 · Cleaning unit

          Kohlhoff Hygienetechnik Sailer - SSR-1 - - 09/2014 -

          Technical details
          0 20 l/min︱total power requirement 4 kW︱weight of the machine ca. t︱required space m︱
          APRON CLEANER APRON CLEANER for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment. for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment.
            0 20 l/min
            total power requirement 4 kW
            Description :
            APRON CLEANER
            APRON CLEANER

            for thorough cleaning and disinfection of aprons in meat processing plants.
            Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure,
            even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result.
            cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral
            mounting on the side of the housing.

            Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW
            Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min,

            When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site.

            Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm

            The unit can be inspected under power near Ulm. Arrange an appointment.
            for thorough cleaning and disinfection of aprons in meat processing plants.
            Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure,
            Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result.
            cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral
            mounting on the side of the housing.

            Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW
            Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min,

            When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site.

            Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm

            The unit can be inspected under power near Ulm. Arrange an appointment.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 5.800 €
          Datasheet
          Request / Contact

          Container

          used Other attachments Container SANDERS Spänebehälter ANTHRAZITGRAU RA


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7237012 · Container

          SANDERS - Spänebehälter ANTHRAZITGRAU RA - - NEU -

          Technical details
          length 1900 mm︱width 810 mm︱height 860 mm︱internal dimension 1,5 x 0,74 x 0,78 m︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 1,9 x 0,81 x 0,86 m︱
          For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l
            length 1900 mm
            width 810 mm
            height 860 mm
            internal dimension 1,5 x 0,74 x 0,78 m
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 1,9 x 0,81 x 0,86 m
            Description :
            For collecting and disposing of bulk goods and industrial waste

            - Tipping container - forklift attachments for in-house storage of
            Bulk solids
            - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL
            7016 anthracite gray / special paint on request
            - Tilting device with base plates for swivel and fixed castors
            - Drainage device
            - Stable base frame with drive-in pockets
            - Favorable load center
            - Robust sheet steel construction with reinforced edges

            Container volume: approx. 600 l


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Container Universitaet Rosenheim Designer-Pavillon


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00297 · Container

          Universitaet Rosenheim - Designer-Pavillon - - 2013 -

          Technical details
          length 716 cm︱width 325 cm︱height 290 mm︱total power requirement 380 V︱weight of the machine ca. 8 t︱dimensions of the machine ca. 716 x 325 x 290 cm︱
          We offer a mobile employee lounge as a unique item: Design students at the University of Rosenheim built a staff lounge (MILO) for AUDI in 2013. This lounge is built for the indoor area using high quality materials with steel-wood construction. It served the employees as a break room and for meetings. The lounge in wood surface (oak) both inside and outside has 2 access doors and on the front a large glass window. She has several seating areas and a kitchen area with running water / sewage, refrigerator and ceramic hob. Outside there is a sink and on both fronts together 52 lockers. There is a ventilation system, sprinkler system, lighting technology as well as the requirements for connecting a TV. All cabling is running in the control box. Water and sewage connection are integrated. This lounge can be disassembled and transported in 5 units. We brought this lounge on a massive transport base. It can thus be in one piece with a special transport (because of excess width) delivered with easy set up. The external dimensions are L x W x H = 716 x 325 x 290 cm. We can imagine this high quality processed lounge as: - Mobile VIP Lounge - Indoor meeting island - Designer Pavilion - Employee break room - Lounge container - Visitor meeting room - Meeting room in a warehouse In any case, it is an eye-catcher and unique. The complete unit is in very good condition. All technical data and documentation are available and can be forwarded now. We are happy to send you more pictures. New price in 2013: >> 100,000 euros. Come for a visit, the staff lounge is still under construction in our warehouse in Giebelstadt near Würzburg (about 80min from FRANKFURT AIRPORT)
            length 716 cm
            width 325 cm
            height 290 mm
            total power requirement 380 V
            weight of the machine ca. 8 t
            dimensions of the machine ca. 716 x 325 x 290 cm
            Description :
            We offer a mobile employee lounge as a unique item:

            Design students at the University of Rosenheim built a staff lounge (MILO) for
            AUDI in 2013. This lounge is built for the indoor area using high quality
            materials with steel-wood construction. It served the employees as a break room
            and for meetings.

            The lounge in wood surface (oak) both inside and outside has 2 access doors
            and on the front a large glass window. She has several
            seating areas and a kitchen area with running water / sewage, refrigerator
            and ceramic hob.

            Outside there is a sink and on both fronts together 52 lockers.

            There is a ventilation system, sprinkler system, lighting technology as well as
            the requirements for connecting a TV. All cabling is running in
            the control box. Water and sewage connection are integrated.

            This lounge can be disassembled and transported in 5 units. We brought this
            lounge on a massive transport base. It can thus be in one
            piece with a special transport (because of excess width) delivered with easy
            set up.

            The external dimensions are L x W x H = 716 x 325 x 290 cm.

            We can imagine this high quality processed lounge as:

            - Mobile VIP Lounge
            - Indoor meeting island
            - Designer Pavilion
            - Employee break room
            - Lounge container
            - Visitor meeting room
            - Meeting room in a warehouse

            In any case, it is an eye-catcher and unique.

            The complete unit is in very good condition. All technical data and
            documentation are available and can be forwarded now. We are happy to send you
            more pictures.

            New price in 2013: >> 100,000 euros.

            Come for a visit, the staff lounge is still under construction in our
            warehouse in Giebelstadt near Würzburg (about 80min from FRANKFURT AIRPORT)


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • Datasheet
          Request / Contact
          used Other attachments Container UNBEKANNT 40 Fuss Seecontainer


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05570 · Container

          UNBEKANNT - 40 Fuss Seecontainer - - 1999 -

          Technical details
          Dimension 40 Fuß Fuß︱height 268 mm︱weight of the machine ca. 4,4 t︱length mm︱width mm︱total power requirement kW︱dimensions of the machine ca. m︱
            Dimension 40 Fuß Fuß
            height 268 mm
            weight of the machine ca. 4,4 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •