Chain Hoist - Electric

weight max. 1000 kg︱stroke / mm︱

---

Load capacity: 1000 kg Main lift at 1000kg: 5.0 m / min

weight max. 80 kg︱stroke / mm︱

---

DKM 1-80 K V1 F4 Load capacity: 80 kg Hook path: 2.8 m Main stroke: 8.0 m / min Fine stroke: 2.0 m / min

weight max. 0,5 t︱stroke 4000 mm︱

---

Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 500 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 1 / 4 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

weight max. 0,5 t︱stroke 3000 mm︱total power requirement 0,54 kW︱weight of the machine ca. 18,5 kg︱

---

weight max. 1,0 t︱stroke 4000 mm︱

---

Use as a stationary chain hoist Chain hoist type GM 4 1000.5-2, 2 strands painted in color RAL 5017 traffic blue Load capacity 1 ton Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-changing) 1.3 / 5 m/min Lifting power 0.22 / 0.9 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

weight max. 0,3 t︱stroke 3000 mm︱total power requirement 0,41 kW︱weight of the machine ca. 14,3 kg︱

---

weight max. 0,25 t︱stroke 4000 mm︱

---

Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 250 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 2 / 8 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control line, including pendant control: 3060 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

weight max. 2500 kg︱stroke - mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Lifting capacity 8 T︱Hoisting height 10000 mm︱Hoisting speed 0,8 -5,0 m/min︱

---

Hoist Radio controlled Side hang steel wire hoist In stock: 1

Lifting capacity 400 kg︱Hoisting height - mm︱Hoisting speed - m/min︱

---

Brand PMH Machine no TR336 Type VAC-320/4-200/MB2 Year of make 2005 Machine dimensions (L×W×H) 1200 x 1.000 x 500 mm Machine weight 120 kg Lifting capacity 400 kg Vacuum lifter, including associated hoist.

Lifting capacity 10 T︱Hoisting height 10000 mm︱Hoisting speed 0,8 - 5,0 m/min︱Track width trolley 2250 mm︱2- Speed trolley 7,1 / 31,3 RPM︱Thickness of steel wire 16,2 mm︱

---

Lifting capacity 10 T︱Capacity - kg︱Span - mm︱

---

Electric hoist on trolley

Capacity 80 kg︱Hoisting speed 8,2 m/min︱Engine 0,8 kW︱

---

380 volts With electric trolley 2 revolutions 337/2377 rpm In stock: 3

Capacity 500 kg︱Hoisting height 6000 mm︱Hoisting speed 1,8/7,2 m/min︱Machine weight 35 kg︱

---

Including electric trolley

Capacity 1000 kg︱Hoisting height 5000 mm︱Hoisting speed 8/4 m/min︱Machine weight - kg︱

---

Brand Demag Machine no TR328 Type PK 10N-F Capacity 2000 kg Lifting height 5000 mm overhead crane chain hoist Electric trolley under-hung faucet

Capacity 500 kg︱Hoisting height 6.000 mm︱Hoisting speed 5/1,25 m/min︱Machine weight - kg︱

---

Brand Verlinde Type VE5 Eurochain Capacity 500 kg Lifting height 6.000 mm lifting speed 5/1.25 m/min Number of speeds 2 chain hoist

max. temperature 150-500 Grad︱basket dimensions 300x210x460 mm︱total power requirement 2.6 kW︱weight of the machine ca. 80 kg︱dimensions of the machine ca. 0.80x0.60x0.95 m︱

---

max. temperature 1000 Grad︱size of opening 170 x 90 mm︱depth of chamber 280 mm︱total power requirement 3 kW︱weight of the machine ca. 80 kg︱dimensions 0,7 x 0,55 x 0,72 m︱

---

max. temperature 1250 Grad︱size of opening 250 x 160 mm︱depth of chamber 500 mm︱total power requirement 8 kW︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. m︱

---

max. temperature 1.050 Grad︱size of opening 380 x 230 mm︱depth of chamber 680 mm︱volume 60 L︱voltage 380 V︱total power requirement 19,0 kW︱weight of the machine ca. 540 kg︱dimensions of the machine ca. 1,15 x 1,35 x 1,65 m︱

---

- Serial-No.: 13817

max. temperature 750 Grad︱size of opening 600x600 mm︱depth of chamber 1800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

max. temperature 1350 Grad︱size of opening 300 mm︱depth of chamber 600 mm︱total power requirement 25 kW︱weight of the machine ca. 1,5 t︱ ︱ ︱ ︱ ︱ ︱

---

Hardening Furnace Temp. 1350 °C H E R E A U S Electrically heated Hardening Furnace with Double Chambers for preheating and hardening. Model DKM 5 Year 1965 ______________________________________________________________ Temperature range max. chamber 1 1.000 °Celsius Temperature range max. chamber 2 1.350 °Celsius Door opening 300 x 200 mm Chamber size width x height x depth 300 x 200 x 500 mm For chamber 2 300 x 200 x 600 mm Working height above floor 1.050 bzw. 1.625 mm Heating up time 20°-1.350° = hardening chamber 2,75 h Heating up time 20°-1.000° = preheating chamber 2,00 h External dimensions approx. width x height x depth 1.000 x 1.200 x 2.100 mm Chamber lining internal Schamotte Connected load approx. 9 & 25 kW - 380 V - 50 cycle Weight approx. 1 .500 kg Accessories / Special Features: Preheating chamber and hardening chamber arranged on top of each other with pneumatic doors which are controlled by foot pedal. Separate switching- and control cabinet with temperature display and ampere display, pre-selection of temperature possible. Deposit area on oven (year 1981) size approx. 500 x 600 mm, Step transformator for control of heating elements (protection and reduction of connected load) Various new heating spirals. These ovens are ideal for tool construction, especially for hardening of high cutting speed tools. Condition : both ovens are in good to very good condition Delivery : ex stock – as inspected Payment : net – after completion of contract We would appreciate your order.

max. temperature 1150 Grad︱size of opening 260 x 160 mm︱depth of chamber 450 mm︱total power requirement 8 kW︱weight of the machine ca. t︱

---

Hardening furnace

︱ ︱ ︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---