Chain Hoist - Electric

weight max. 0,16 t︱stroke 1,50/6,00 m/ mm︱clamping width 3000 mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

serial number 220-142688 ︱weight max. in kg 2000 kg︱

---

load capacity 500 kg︱lifting height 15 m︱voltage 380/415 V︱voltage 50/60 Hz︱lifting speed 8,5/0,7 m/min︱load chain 6x16,7 m︱year of construction 2014 -︱weight 36,7 kg︱

---

KITO Electric chain hoist tested! ER2-005 IS load capacity 500kg lifting height max. 15m 380/415V/3/50/60Hz lifting speed 8.5/0.7m/min with precision hoist standard with inverter control with chain box load chain 6.0x16.7m with suspension hook without pilot cylinder, but can be purchased separately grade 3m year of construction 2014 used, very good condition if necessary with materials book with functional guarantee tested by an expert with test acceptance report weight 36.7kg Currently there are 2 pieces in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.

weight max. 20 t︱clamping width 10195 mm︱speed 5 / 0,80 m/min︱travel of hook 6000 mm︱trolley weight 6180 kg︱total wight 2615 kg︱ Flurbedienung Druckknopf ︱pitch 31,9 m︱

---

Load capacity: 20 000 kg Span: 10 195 kg Total weight: 6180 kg Trolley track: 2500 mm Trolley weight: 1340 kg Impeller diameter: 200 mm Impeller turn: 57 mm hook path: 6000 mm Rope length: 31.95 m hoisting speed: 5.00/ 0. 80 m/min with radio control Year of manufacture: 2007

Weight 37 kg︱Year of construction 2006 -︱load capacity 20 t︱

---

CARL STAHL Automatic safety hook Type 20S Load capacity 20t Order no. 25302020015005 Weight approx. 37kg with hook OK 26-8 Year of construction: 2006 You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.

weight max. 1000 kg︱clamping width 2000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

weight max. in kg 1000 kg︱connected load frequency 230 V︱weight 8,0 kg︱dimensions 300 x 300 x 100 mm︱

---

Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable.

weight max. in kg 800/400 kg︱stroke 6/12 mm︱stroke speed 5/8 m/min︱output 1,25 kw︱connected load frequency 230 V︱weight 21 kg︱dimensions 420 x 180 x 280 mm︱

---

Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable.

weight max. in kg 300 kg︱stroke 3000 mm︱stroke speed 2,3 m/min︱output 0,2 kw︱connected load frequency 230 V︱weight 8,0 kg︱dimensions 290 x 230 x 450 mm︱

---

Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable.

weight max. 0,5 t︱clamping width 500 - 1250 mm︱connected load frequency 230 V︱weight of the machine ca. ca. 70 Kg︱dimensions turret heads 1,36 x 0,4 x 0,55 mm︱

---

weight max. in kg 500 kg︱stroke 3000 mm︱stroke speed 2,8 m/min︱output 0,5 kw︱connected load frequency 230 V︱weight 18,5 kg︱dimensions 290 x 230 x 450 mm︱

---

Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable.

weight max. in kg 5000 kg︱connected load frequency 230 V︱weight 12 kg︱dimensions 700 x 300 x 300 mm︱

---

Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable.

weight max. in kg 10000 kg︱weight 10 kg︱dimensions 700 x 300 x 300 mm︱

---

with power supply and remote control

weight max. 1000 kg︱stroke / mm︱

---

Load capacity: 1000 kg Main lift at 1000kg: 5.0 m / min

weight max. 80 kg︱stroke / mm︱

---

DKM 1-80 K V1 F4 Load capacity: 80 kg Hook path: 2.8 m Main stroke: 8.0 m / min Fine stroke: 2.0 m / min

weight max. 0,5 t︱stroke 3000 mm︱total power requirement 0,54 kW︱weight of the machine ca. 18,5 kg︱

---

weight max. 0,5 t︱stroke 4000 mm︱

---

Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 500 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 1 / 4 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

weight max. 1,0 t︱stroke 4000 mm︱

---

Use as a stationary chain hoist Chain hoist type GM 4 1000.5-2, 2 strands painted in color RAL 5017 traffic blue Load capacity 1 ton Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-changing) 1.3 / 5 m/min Lifting power 0.22 / 0.9 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

weight max. 0,3 t︱stroke 3000 mm︱total power requirement 0,41 kW︱weight of the machine ca. 14,3 kg︱

---

weight max. 0,25 t︱stroke 4000 mm︱

---

Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 250 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 2 / 8 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control line, including pendant control: 3060 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

weight max. 2500 kg︱stroke - mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Lifting capacity 8 T︱Hoisting height 10000 mm︱Hoisting speed 0,8 -5,0 m/min︱

---

Hoist Radio controlled Side hang steel wire hoist In stock: 1

Lifting capacity 400 kg︱Hoisting height - mm︱Hoisting speed - m/min︱

---

Brand PMH Machine no TR336 Type VAC-320/4-200/MB2 Year of make 2005 Machine dimensions (L×W×H) 1200 x 1.000 x 500 mm Machine weight 120 kg Lifting capacity 400 kg Vacuum lifter, including associated hoist.

Lifting capacity 10 T︱Hoisting height 10000 mm︱Hoisting speed 0,8 - 5,0 m/min︱Track width trolley 2250 mm︱2- Speed trolley 7,1 / 31,3 RPM︱Thickness of steel wire 16,2 mm︱

---