,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Injection-moulding machines (plastic)

          Machinelist: Injection-moulding machines (plastic)


          Injection-moulding machines (plastic)

          used Injection Moulding Injection-moulding machines (plastic) ARBURG Allrounder 470S-1300-350


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L240301 · Injection-moulding machines (plastic)

          ARBURG - Allrounder 470S-1300-350 - - 2002 -

          Technical details
          clamping force 1300 kN︱injection volume -- cm³︱screw diameter 45 mm︱platen size 470 x 470 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical precision parts were produced. Regularly maintained and calibrated. Without accessories such as peripheral devices, conveyors, robots, etc. and without material hopper.
            clamping force 1300 kN
            injection volume -- cm³
            screw diameter 45 mm
            platen size 470 x 470 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,
            Type: Allrounder 470 S 1300-350

            Injection unit:
            - Screw diameter: 45 mm
            - Centring ring diameter: 125 mm
            - Shot weight max.: 210 g (PS)
            - Injection pressure: 1,840 bar

            Clamping unit:
            - Clamping force: 1300 kN
            - Opening stroke max.: 850 mm
            - Mould installation height: min. 275 mm
            - Mould mounting platens: 470 x 470 mm
            - Operating hours approx.: 91,000

            - Core pulls: 1x
            - Valve gate: 1x pneumatic
            - Hot runner control points: 12x
            - Temperature control unit interfaces: 6x (20 mA)
            - Conveyor belt in the machine
            - Selector unit. available
            - Release for high temperature up to 450°C
            - Communication card for ProSeS interface available
            - Robot interface available.

            Technical precision parts were produced.
            Regularly maintained and calibrated.

            Without accessories such as peripheral devices,
            conveyors, robots, etc. and without material hopper.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG Allrounder 270 M 500-90


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L211201 · Injection-moulding machines (plastic)

          ARBURG - Allrounder 270 M 500-90 - - 1991 -

          Technical details
          clamping force 500 kN︱injection volume -- cm³︱screw diameter 25 mm︱platen size 400 x 400 mm︱
          Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg
            clamping force 500 kN
            injection volume -- cm³
            screw diameter 25 mm
            platen size 400 x 400 mm
            Description :
            Condition: used,

            Specification: horizontal injection molding machine,
            - used

            injection unit:
            - Screw diameter: 25 mm
            - shot volume max.: -- cm³
            - injection pressure approx.: 1290 bar
            - heating zones: 4
            - Heating power: 4 kW

            clamping unit:
            - clamping force: 500 kN
            - opening stroke max.: 325 mm
            - platen distance max.: 550 mm
            - clamping platen size approx.: 400 x 400 mm
            - tie bar distance: 270 x 270 mm

            - pump motor: 15 kW
            - total power: 19 kW
            - operating voltage: 380V, 50Hz
            - Weight approx.: 1.870 kg



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG Allrounder 270 A 500-210


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L211202 · Injection-moulding machines (plastic)

          ARBURG - Allrounder 270 A 500-210 - - 1988 -

          Technical details
          clamping force 500 kN︱injection volume -- cm³︱screw diameter 30 mm︱platen size 400 x 400 mm︱
          Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 30 mm - shot volume max.: -- cm³ - injection pressure approx.: 1150 bar - heating zones: 4 - Heating power: 5,56 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 20,6 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.850 kg
            clamping force 500 kN
            injection volume -- cm³
            screw diameter 30 mm
            platen size 400 x 400 mm
            Description :
            Condition: used,

            Specification: horizontal injection molding machine,
            - used

            injection unit:
            - Screw diameter: 30 mm
            - shot volume max.: -- cm³
            - injection pressure approx.: 1150 bar
            - heating zones: 4
            - Heating power: 5,56 kW

            clamping unit:
            - clamping force: 500 kN
            - opening stroke max.: 325 mm
            - platen distance max.: 550 mm
            - clamping platen size approx.: 400 x 400 mm
            - tie bar distance: 270 x 270 mm

            - pump motor: 15 kW
            - total power: 20,6 kW
            - operating voltage: 380V, 50Hz
            - Weight approx.: 1.850 kg



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG Allrounder 270 D 500-210


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L211204 · Injection-moulding machines (plastic)

          ARBURG - Allrounder 270 D 500-210 - - 1986 -

          Technical details
          clamping force 500 kN︱injection volume -- cm³︱screw diameter 30 mm︱platen size 400 x 400 mm︱
          Condition: used, Specification: horizontal injection molding machine, - used, Defect injection unit: - Screw diameter: 30 mm - shot volume max.: -- cm³ - injection pressure approx.: 1150 bar - heating zones: 4 - Heating power: 5,56 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 20,6 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.850 kg System is not functional. CPU card does not control the screen. (As spare parts storage)
            clamping force 500 kN
            injection volume -- cm³
            screw diameter 30 mm
            platen size 400 x 400 mm
            Description :
            Condition: used,

            Specification: horizontal injection molding machine,
            - used, Defect

            injection unit:
            - Screw diameter: 30 mm
            - shot volume max.: -- cm³
            - injection pressure approx.: 1150 bar
            - heating zones: 4
            - Heating power: 5,56 kW

            clamping unit:
            - clamping force: 500 kN
            - opening stroke max.: 325 mm
            - platen distance max.: 550 mm
            - clamping platen size approx.: 400 x 400 mm
            - tie bar distance: 270 x 270 mm

            - pump motor: 15 kW
            - total power: 20,6 kW
            - operating voltage: 380V, 50Hz
            - Weight approx.: 1.850 kg

            System is not functional. CPU card
            does not control the screen. (As spare parts storage)



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG Allrounder 270 A 500-210


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L211203 · Injection-moulding machines (plastic)

          ARBURG - Allrounder 270 A 500-210 - - 1986 -

          Technical details
          clamping force 500 kN︱injection volume -- cm³︱screw diameter 30 mm︱platen size 400 x 400 mm︱
          Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 30 mm - shot volume max.: -- cm³ - injection pressure approx.: 1150 bar - heating zones: 4 - Heating power: 5,56 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 20,6 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.850 kg
            clamping force 500 kN
            injection volume -- cm³
            screw diameter 30 mm
            platen size 400 x 400 mm
            Description :
            Condition: used,

            Specification: horizontal injection molding machine,
            - used

            injection unit:
            - Screw diameter: 30 mm
            - shot volume max.: -- cm³
            - injection pressure approx.: 1150 bar
            - heating zones: 4
            - Heating power: 5,56 kW

            clamping unit:
            - clamping force: 500 kN
            - opening stroke max.: 325 mm
            - platen distance max.: 550 mm
            - clamping platen size approx.: 400 x 400 mm
            - tie bar distance: 270 x 270 mm

            - pump motor: 15 kW
            - total power: 20,6 kW
            - operating voltage: 380V, 50Hz
            - Weight approx.: 1.850 kg



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG ALLROUNDER 305 ECO 700-230


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L191201 · Injection-moulding machines (plastic)

          ARBURG - ALLROUNDER 305 ECO 700-230 - - 1984 -

          Technical details
          clamping force 700 kN︱injection volume 103 cm³︱screw diameter 30 mm︱platen size 432 x 310 mm︱closing stroke 650 mm︱
            clamping force 700 kN
            injection volume 103 cm³
            screw diameter 30 mm
            platen size 432 x 310 mm
            closing stroke 650 mm


        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG ALLROUNDER 370C 600-250


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L231201 · Injection-moulding machines (plastic)

          ARBURG - ALLROUNDER 370C 600-250 - - 08.2000 -

          Technical details
          clamping force 600 kN︱injection volume 144 cm³︱screw diameter 35 mm︱platen size 570 x 570 mm︱closing stroke 500 mm︱
          Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 + 3x 1,300 W + 600 W - Total heating power: 6100 W Electro-hydraulic equipment: - Rated power of hydraulic motor: 11 kW - Total installed power: 19.1 kW - Electrical connection: 80 A - Hydraulic oil filling: 230 litres Dimensions and weights: - Net weight: 3,180 kg - Operating hours approx.: 90,000 Equipment: - 2x core pull - Connection for NVD mould 1x pneumatic, 1x hydraulic - 6-fold hot runner control - Piezo cavity pressure changeover - Handling interface plant is still in production and will be available from February 2024 available. Viewing is possible at any time.
            clamping force 600 kN
            injection volume 144 cm³
            screw diameter 35 mm
            platen size 570 x 570 mm
            closing stroke 500 mm
            Description :
            Condition: used

            Specification: Horizontal injection moulding machine

            clamping unit:
            - Clamping force max.: 600 kN
            - clamping platens: 570 x 570 mm
            - clear column distance: 370 x 370 mm
            - Distance between the mould mounting platens: 750 mm
            - Mould installation height: 250 mm
            - Opening stroke max.: 500 mm
            - Ejector travel hyd. Ejector stroke: 175 mm
            - Ejector force max.: 40 kN

            Injection unit:
            - Screw diameter: 35 mm
            - Screw length: 20D
            - Screw stroke max.: 150 mm
            - Max. dosing volume: 144 cm³
            - Moulded part weight: 121 g

            - Injection pressure: 1,820 bar
            - Injection flow max.: 154 cm³/s
            - Screw peripheral speed: 57 m/min
            - Screw torque max.: 440 Nm
            - Barrel and nozzle heating: 1600 + 3x 1,300 W + 600 W
            - Total heating power: 6100 W

            Electro-hydraulic equipment:
            - Rated power of hydraulic motor: 11 kW
            - Total installed power: 19.1 kW
            - Electrical connection: 80 A
            - Hydraulic oil filling: 230 litres

            Dimensions and weights:
            - Net weight: 3,180 kg

            - Operating hours approx.: 90,000

            Equipment:
            - 2x core pull
            - Connection for NVD mould 1x pneumatic, 1x hydraulic
            - 6-fold hot runner control
            - Piezo cavity pressure changeover
            - Handling interface

            plant is still in production and will be available from February 2024
            available. Viewing is possible at any time.



        • MEB Maschinenhandel GmbH
        • Schwalbenweg 4
        • 30826 Garbsen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •