,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Glazing and control press

          Machinelist: Glazing and control press


          Glazing and control press

          used Window production: wood Glazing and control press RUCHSER RU-VGPA 3


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6419 · Glazing and control press

          RUCHSER - RU-VGPA 3 - - neu -

          Technical details
          3000 ︱Working height 2500 mm︱ 300-800 mm︱
            3000
            Working height 2500 mm
            300-800 mm


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Glazing and control press RUCHSER RU-VGP3


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5917 · Glazing and control press

          RUCHSER - RU-VGP3 - - neu -

          Technical details
          3000,4000 mm︱Working height 2400 mm︱ 300 - 800 mm︱
          RUCHSER glazing and control press RU-VGP --------------------------------------- for glazing, sealing and final inspection, the press beam process is done manually. Equipment RU-VGP: A press beam can be folded down on the left or right Press beam can be moved manually Press bar guided above and below via toothed racks, therefore more absolute Parallel run when pressing Safety control during pressure build-up. With stepless pneumatic lifting device, from 300-800 mm System part optionally with felt or PVC sliding strip support, as well as with rollers Made of rubber Ø 48 mm, roller spacing 50 mm or 25 mm available Roller conveyor with steel rollers 200 mm long as an installation surface Suggested equipment, alternative / optional equipment on request! Pos. 1.0: Article no .: 1170000 RU-VGP3 glazing and control press Clamping width maximum 3000 mm, Length 3550 mm, width 900 mm, height 2700 mm, System height 1900 mm, press beam height 2400 mm. Clamping beam depth 150 mm. Plant part covered with felt. Installation area as a roller conveyor with a roller diameter of 50 mm, Roll length 200 mm, roll spacing 200 mm. Lifting device from 300 to 800 mm above the floor. One clamping beam can be folded down, the second Clamping beam can be moved and cannot be folded down assembled. When ordering, please specify whether right or left clamping beam should be movable! Pos. 1.1: Article no .: 6991 Swivel device from 83 ° to 90 ° for RU-VGP and RU-VGPA this widens the VGPA / VGP by 200 mm. Pos. 1.2: Article no .: 21424-1 Clamping beam increase from 2400 mm to 2700 mm. Pos. 1.3: Article no .: 5070 2 foldable stops for control work and Sealing / glazing from the outside. Item 1.4: Article no .: 5056 RU-AK-6 storage box 1000x120 mm, 6 compartments, for hanging in the roller conveyor Item 1.5: Article no .: 5130 System part with rollers made of rubber, Ø 48 mm, roller spacing 50 mm, for RU-VGPA3 Item 1.6: Article no .: 5908 Tilting device for working in a horizontal position For glazing presses RU-VGP3 --------------------------------------- Total price in this version ex works: on request! plus packaging and transport. Option version with 4 m working length, surcharge: 1,090.00 euros plus St. See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)
            3000,4000 mm
            Working height 2400 mm
            300 - 800 mm
            Description :
            RUCHSER glazing and control press RU-VGP
            ---------------------------------------
            for glazing, sealing and final inspection, the press beam process
            is done manually.

            Equipment RU-VGP:

            A press beam can be folded down on the left or right
            Press beam can be moved manually
            Press bar guided above and below via toothed racks, therefore more absolute
            Parallel run when pressing
            Safety control during pressure build-up.
            With stepless pneumatic lifting device, from 300-800 mm
            System part optionally with felt or PVC sliding strip support, as well as with
            rollers
            Made of rubber Ø 48 mm, roller spacing 50 mm or 25 mm available
            Roller conveyor with steel rollers 200 mm long as an installation surface

            Suggested equipment, alternative / optional equipment on request!

            Pos. 1.0: Article no .: 1170000
            RU-VGP3 glazing and control press

            Clamping width maximum 3000 mm,
            Length 3550 mm, width 900 mm, height 2700 mm,
            System height 1900 mm, press beam height 2400 mm.
            Clamping beam depth 150 mm.
            Plant part covered with felt.
            Installation area as a roller conveyor with a roller diameter of 50 mm,
            Roll length 200 mm, roll spacing 200 mm.
            Lifting device from 300 to 800 mm above the floor.
            One clamping beam can be folded down, the second
            Clamping beam can be moved and cannot be folded down
            assembled.
            When ordering, please specify whether right or
            left clamping beam should be movable!

            Pos. 1.1: Article no .: 6991
            Swivel device from 83 ° to 90 ° for RU-VGP and RU-VGPA
            this widens the VGPA / VGP by 200 mm.

            Pos. 1.2: Article no .: 21424-1
            Clamping beam increase from 2400 mm to 2700 mm.

            Pos. 1.3: Article no .: 5070
            2 foldable stops for control work and
            Sealing / glazing from the outside.

            Item 1.4: Article no .: 5056
            RU-AK-6 storage box 1000x120 mm, 6 compartments,
            for hanging in the roller conveyor

            Item 1.5: Article no .: 5130
            System part with rollers made of rubber,
            Ø 48 mm, roller spacing 50 mm, for RU-VGPA3

            Item 1.6: Article no .: 5908
            Tilting device for working in a horizontal position
            For glazing presses RU-VGP3

            ---------------------------------------

            Total price in this version ex works: on request!
            plus packaging and transport.

            Option version with 4 m working length, surcharge: 1,090.00 euros plus St.

            See attached video and PDF brochure.

            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Glazing and control press RUCHSER RU-SW3-90°


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6752 · Glazing and control press

          RUCHSER - RU-SW3-90° - - Neu -

          Technical details
          0 2750 mm︱Working height 2500 mm︱0 300-1000 mm︱
          RUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022 ----------------------------------------------------- Vertical work table with lifting device and turning device. Especially Suitable for glazing and sealing wooden windows on both sides. Furnishing: System part covered with felt Infinitely variable pneumatic lifting device, Stroke of 300 mm - 1000 mm, based on roller conveyor height Turning device for sealing on both sides, with roller conveyor 150 mm roll length 2 pneumatic tensioners for clamping the window to the turning device Version with special turning device for pushing through the on the Roller conveyor set up window with applied (closed) turning device Alternative/optional equipment on request! Pos. 1.0: Item no.: 1000000 RU-SW3-90° vertical work table for Wooden window with turning device for Glazing and sealing on both sides angle length 1970 mm, opening angle 90°, max. working width 2750 mm, total length 3050 mm, Total width 780 mm, system height 1600 mm, system surface with felt, left OR right one Roll as edge protection for elements up to 2500 mm Height. Pneumatic lifting device from 300 - 1000 mm. Installation area as a roller conveyor with steel rollers, Roll length and roll pitch 200 mm. Pos. 1.1: Item no.: 5202 Plant part with rubber rollers, Ø 48 mm, roll distance. 50mm, for RU-SW3-90° and RU-SWS3 Pos. 1.2: : Item no.: 7081 Steel angle covered with felt mounted above the roller bars for RU-SW3-90° These prevent the windows from "rattling". when pushing. The additional bars will above all roller bars of the RU-S2 appropriate. Pos. 1.3: : Artkelnr.:5056 RU-AK-6 storage box 1000x120 mm, 6 compartments for hanging into the roller conveyor ----------------------------------------------------- Total price in this version: on request! Ex works plus packaging and shipping. See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)
            0 2750 mm
            Working height 2500 mm
            0 300-1000 mm
            Description :
            RUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022
            -----------------------------------------------------
            Vertical work table with lifting device and turning device. Especially
            Suitable for glazing and sealing wooden windows on both sides.

            Furnishing:
            System part covered with felt
            Infinitely variable pneumatic lifting device,
            Stroke of 300 mm - 1000 mm, based on roller conveyor height
            Turning device for sealing on both sides, with roller conveyor 150 mm
            roll length
            2 pneumatic tensioners for clamping the window to the turning device
            Version with special turning device for pushing through the on the
            Roller conveyor set up window with applied (closed)
            turning device

            Alternative/optional equipment on request!

            Pos. 1.0: Item no.: 1000000
            RU-SW3-90° vertical work table for
            Wooden window with turning device for
            Glazing and sealing on both sides

            angle length 1970 mm, opening angle 90°, max.
            working width 2750 mm, total length 3050 mm,
            Total width 780 mm, system height 1600 mm, system surface
            with felt, left OR right one
            Roll as edge protection for elements up to 2500 mm
            Height. Pneumatic lifting device from 300 - 1000 mm.
            Installation area as a roller conveyor with steel rollers,
            Roll length and roll pitch 200 mm.

            Pos. 1.1: Item no.: 5202
            Plant part with rubber rollers,
            Ø 48 mm, roll distance. 50mm,
            for RU-SW3-90° and RU-SWS3

            Pos. 1.2: : Item no.: 7081
            Steel angle covered with felt
            mounted above the roller bars
            for RU-SW3-90°
            These prevent the windows from "rattling".
            when pushing. The additional bars will
            above all roller bars of the RU-S2
            appropriate.

            Pos. 1.3: : Artkelnr.:5056
            RU-AK-6 storage box 1000x120 mm,
            6 compartments for hanging
            into the roller conveyor

            -----------------------------------------------------

            Total price in this version: on request!
            Ex works plus packaging and shipping.

            See attached video and PDF brochure.

            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Glazing and control press Ruchser RU-VGPA3


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6819 · Glazing and control press

          Ruchser - RU-VGPA3 - - gebraucht -

          Technical details
          0 3000 mm︱Working height 2500 mm︱0 ja ja︱
          Glazing press with equipment ----------------- Working dimensions: Length: 3,000mm Height: 2,500mm Total length: 3,700 mm System height: 1,900 mm Press beam height: 2,200 mm ----------------- Manual width adjustment Height adjustment pneumatic lifting device 500mm ----------------- (Technical information according to the manufacturer - no guarantee!)
            0 3000 mm
            Working height 2500 mm
            0 ja ja
            Description :
            Glazing press with equipment
            -----------------
            Working dimensions:
            Length: 3,000mm
            Height: 2,500mm

            Total length: 3,700 mm
            System height: 1,900 mm
            Press beam height: 2,200 mm
            -----------------
            Manual width adjustment
            Height adjustment pneumatic lifting device 500mm
            -----------------
            (Technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Glazing and control press RUCHSER RU-VGPA 4


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2733 · Glazing and control press

          RUCHSER - RU-VGPA 4 - - gebraucht -

          Technical details
          0 4000 mm︱Working height 2200 mm︱0 300 - 800 mm︱Dimensions (length / width) 4800 x 900 x 2500 mm︱
          Glazing and control press RU-VGPA 4 for glazing, sealing and final inspection. RU-VGPA4 glazing and control press Length 4800 mm, width 900 mm, height 2500 mm, System height 1900 mm, press beam height 2200 mm. System part covered with felt. Installation area as a roller conveyor, Lifting device from 300 to 800 mm. Two pneumatically foldable and movable press beam. Simultaneous, synchronous folding and moving the press beams over a single Foot valve, therefore requires the least amount of time Opening and closing the press. Safety control when building up pressure. (Technical description according to the manufacturer - no guarantee!)
            0 4000 mm
            Working height 2200 mm
            0 300 - 800 mm
            Dimensions (length / width) 4800 x 900 x 2500 mm
            Description :
            Glazing and control press RU-VGPA 4
            for glazing, sealing and final inspection.

            RU-VGPA4 glazing and control press
            Length 4800 mm, width 900 mm, height 2500 mm,
            System height 1900 mm, press beam height 2200 mm.
            System part covered with felt.
            Installation area as a roller conveyor,
            Lifting device from 300 to 800 mm.
            Two pneumatically foldable and movable
            press beam. Simultaneous, synchronous folding
            and moving the press beams over a single
            Foot valve, therefore requires the least amount of time
            Opening and closing the press.
            Safety control when building up pressure.


            (Technical description according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact

          Window production centre

          used Window production: wood Window production centre WEINIG Unicontrol 6 NC Spindeln


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2732 · Window production centre

          WEINIG - Unicontrol 6 NC Spindeln - - neuwertig - Weinig, PC-Nexus

          Technical details
          Tenoning spindle 1 0︱Number of milling agregates 5 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus
          # 2732 Weinig Unicontrol 6 with NC spindles ------------------------------------------------ Machine is in checking process at the moment! Technical data summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ------------------------------------------------ > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser directional light to detect the saw section Pos. 2: Rounding unit horizontally at the bottom ------------------------------------------------ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Adjustment path axially mechanically coupled to crosscut saw > Adjustment path radially pneumatically controlled on/off Length stop CNC controlled ------------------------------------------------ > Length 3500 mm > electronic length stop Pos. 3: Tap and slot spindle ------------------------------------------------ > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, CNC > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 4: 1. Profiling spindle (synchronous and counter-rotation) ------------------------------------------------ > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ------------------------------------------------ > Position: vertical right > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, NC > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (area of synchronous spindle), Rung support bar from above in the area of the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontally at the top ------------------------------------------------ > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed 9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment path 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fittings spindle) ------------------------------------------------ > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Pos. 8: Profile milling unit/grooving unit from below ------------------------------------------------ > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 100 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 200 mm Other features ------------------------------------------------ > online capable > Electric feed height adjustment including mechanical digital display and manual feed beam clamping > Folding device for tear-free folding > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Industrial PC, touchscreen with Windows PC control/NEXUS > with Weinig type production program Suction nozzle diameter: ------------------------------------------------ Crosscut saw 80 mm Slotted spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Fitting spindle 120 mm Grooving device from above 80 mm Grooving device from below 80 mm Option: used tools Oertli IV 68/78 wood and wood-aluminium (see warehouse number 6813) The technical characteristics of this machine should meet your expectations do not correspond, please contact us. Our A team with many years of experience will be happy to support you with any adjustments or when looking for a machine that meets your requirements! (technical data according to the manufacturer - no guarantee!)
            Tenoning spindle 1 0
            Number of milling agregates 5 St.
            Spindle diameter 50 mm
            control Weinig, PC-Nexus
            Description :
            # 2732 Weinig Unicontrol 6 with NC spindles
            ------------------------------------------------
            Machine is in checking process at the moment!

            Technical data summary
            (please inquire about any additional accessories included)


            Pos. 1: Crosscut saw
            ------------------------------------------------
            > Number of tools: 1 piece.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3 kW
            > Adjustment path radially pneumatically controlled to 8 positions,
            e.g. for edge rounding from above

            > Laser directional light to detect the saw section

            Pos. 2: Rounding unit horizontally at the bottom
            ------------------------------------------------
            > Position: horizontally below
            > Motor power: 1.5 kW
            > Spindle diameter: 20 mm
            > Clamping length 25 mm
            > Spindle speed: 9000 rpm
            > Tool flight circle max.: 130 mm
            > Adjustment path axially mechanically coupled to crosscut saw
            > Adjustment path radially pneumatically controlled on/off

            Length stop CNC controlled
            ------------------------------------------------
            > Length 3500 mm
            > electronic length stop

            Pos. 3: Tap and slot spindle
            ------------------------------------------------
            > Number of tools: variable, infinitely variable, NC
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, infinitely variable, CNC
            > Spindle speed: 3500 rpm
            > Tool flight circle max. 320 mm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW

            Pos. 4: 1. Profiling spindle (synchronous and counter-rotation)
            ------------------------------------------------
            > Position: vertical right
            > Number of tools: 1 piece.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW

            Pos. 5: 2nd profiling spindle
            ------------------------------------------------
            > Position: vertical right
            > Number of tools: variable, infinitely variable, NC
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, infinitely variable, NC
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW

            2 feed rollers axially pneumatically controlled opposite the spindle, 2
            positions

            Rung guide consisting of:
            Guide ruler in the stop (area of synchronous spindle),
            Rung support bar from above in the area of the profile milling unit vertically
            on the right
            and profiling spindle.


            Pos. 6: Profile milling unit horizontally at the top
            ------------------------------------------------
            > Clamping length: 40 mm
            > Spindle diameter: 40 mm
            > Motor power: 3.0 kW
            > Speed 9,000 rpm
            > Tool flight circle max. 130 mm
            > Axial adjustment range 30 mm, 8 positions
            > Radial adjustment path 125 mm, 8 positions

            Pos. 7: 3rd profiling spindle (fittings spindle)
            ------------------------------------------------
            > Position: vertical right
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm, 8 positions
            > Radial adjustment range 110 mm, 8-fold turret
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 210 mm
            > Motor power: 3.0 kW

            Pos. 8: Profile milling unit/grooving unit from below
            ------------------------------------------------
            > Motor power: 3.0 kW
            > Tool clamping length: 125 mm
            > Axial adjustment range 100 mm, 8 positions
            > Radial adjustment range 100 mm, 8-fold turret
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 200 mm

            Other features
            ------------------------------------------------
            > online capable
            > Electric feed height adjustment including mechanical digital display
            and manual feed beam clamping
            > Folding device for tear-free folding
            > Double parts package
            > Return conveyor for 1-man operation: slat conveyor
            > Screen controls
            > Slanted window device
            > Electronic angle display for sloping windows
            > Industrial PC, touchscreen with Windows PC control/NEXUS
            > with Weinig type production program

            Suction nozzle diameter:
            ------------------------------------------------
            Crosscut saw 80 mm
            Slotted spindle 140 mm
            Profile spindle 1 140 mm
            Profile spindle 2 140 mm
            Fitting spindle 120 mm
            Grooving device from above 80 mm
            Grooving device from below 80 mm

            Option:
            used tools Oertli IV 68/78 wood and wood-aluminium (see warehouse number 6813)



            The technical characteristics of this machine should meet your expectations
            do not correspond, please contact us. Our
            A team with many years of experience will be happy to support you with any
            adjustments or when looking for a machine that meets your requirements!

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 12 NC


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2711 · Window production centre

          WEINIG - Unicontrol 12 NC - - gebraucht - CNC, Weinig PC-Nexus

          Technical details
          Tenoning spindle 2 St.︱Number of milling agregates 7 St.︱Spindle diameter 50 mm︱Control CNC, Weinig PC-Nexus
          Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .................................................. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .................................................. crosscut saw .................................................. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .................................................. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop .................................................. > Length 4500mm 1. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape .................................................. Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) .................................................. > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm 4. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 5. Profile milling unit (fitting spindle) .................................................. > Position: vertical right > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment range 115 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm 6. Profile milling unit (grooving device from above), in the additional stand .................................................. > Position: working vertically to the right from above > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 100 mm, 8 positions using pneumatic turret > Radial adjustment path 80 mm 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Tool flight circle max.: 180 mm 7. Profiling spindle (grooving device from below, in the additional stand) .................................................. > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment range 100 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm Other features .................................................. > online capable > Folding device for tear-free folding > 2 axially clocked feed rollers opposite profile milling units, for production of narrow, short parts (e.g. glazing bars) > 3 axially clocked feed rollers (2) opposite the profiling spindle 8 positions using pneumatic turret, for spindle 1,2,3 > 3 table tops indexed to the tool diameter (2 positions), profile spindle No. 3 and fitting spindle > 3 rung support rails cycled vertically after the last profiling spindle > Feed height adjustment with NC axis > Divided pressure ruler on the left for wood widths of 40-140 mm > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Control: NEXUS PC control > VARIOplus package for tapping and slotting table, including length stop, CNC-controlled, 4,500 mm timber length, including studio window installation, Swivel angle 75 degrees, horizontal CNC axis, adjustment range 200 mm > Automatic central lubrication > Air conditioning unit in the control cabinet Option: > used window tools OERTLI IV 68, 78 wood and wood-aluminium Should the technical characteristics of this machine not meet your expectations correspond, please contact us. Our longtime experienced team will be happy to support you with any adjustments or with the Find a machine that suits your needs! (Technical information according to the manufacturer - without guarantee!)
            Tenoning spindle 2 St.
            Number of milling agregates 7 St.
            Spindle diameter 50 mm
            Control CNC, Weinig PC-Nexus
            Description :
            Weinig Uncontrol 12
            with radial and axial CNC spindles and VARIO table
            ..................................................
            The machine has already been professionally dismantled and stored in 73447
            Oberkochen

            Specifications summary
            (please inquire about any additional accessories included)
            ..................................................

            crosscut saw
            ..................................................
            > Crosscut saw electronically, horizontally infinitely adjustable
            > Number of tools: 1 pc.
            > Spindle speed: 3000-6000 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3.7 kW
            > Laser guide light for detecting the sawing section
            > Axial adjustment path 150 mm NC axis, electronically stepless
            > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from
            above

            rounding aggregate
            ..................................................
            > Position: horizontally below
            > Axial adjustment path together with the crosscut saw.


            electronic length stop
            ..................................................
            > Length 4500mm

            1. Tap and Slot Spindle
            ..................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment range: 580 mm NC axis, stepless
            > Spindle speed: 2,800-4,000 rpm
            > Tool diameter: 380-400mm
            > Overrun counter, complete clamping length is countered

            2. Tap and Slot Spindle
            ..................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment range: 580 mm NC axis, stepless
            > Spindle speed: 2,800-4,000 rpm
            > Tool diameter: 380-400mm
            > Overrun counter, complete clamping length is countered

            transfer tape
            ..................................................
            Included for transferring the parts to longitudinal processing
            Separation of double parts before entering longitudinal processing.

            1. Profiling spindle (synchronous and counter-rotating)
            ..................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment range 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Minimum tool flight circle: 140 mm
            > Tool flight circle max.: 232 mm


            2. Profiling spindle
            ..................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment range 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Minimum tool flight circle: 140 mm
            > Tool flight circle max.: 232 mm


            3. Profile milling unit (grooving device from above)
            ..................................................
            > Position: horizontally above
            > Motor power: 3.0 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment range 30 mm NC axis, stepless
            > Radial adjustment range 125 mm NC axis, stepless
            > Spindle speed: 9000 rpm
            > Tool flight circle max.: 130 mm

            4. Profiling spindle
            ..................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment range 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Minimum tool flight circle: 140 mm
            > Tool flight circle max.: 232 mm

            5. Profile milling unit (fitting spindle)
            ..................................................
            > Position: vertical right
            > Motor power: 3.0 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm NC axis, stepless
            > Radial adjustment range 100 mm NC axis, stepless
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 210 mm


            6. Profile milling unit (grooving device from above), in the additional stand
            ..................................................
            > Position: working vertically to the right from above
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment path 100 mm, 8 positions using pneumatic turret
            > Radial adjustment path 80 mm 8 positions using pneumatic turret
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 180 mm

            7. Profiling spindle (grooving device from below, in the additional stand)
            ..................................................
            > Position: horizontally below
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 125 mm
            > Axial adjustment range 100 mm NC axis, stepless
            > Radial adjustment range 100 mm NC axis, stepless
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 200 mm

            Other features
            ..................................................

            > online capable
            > Folding device for tear-free folding
            > 2 axially clocked feed rollers opposite profile milling units, for production
            of narrow, short parts (e.g. glazing bars)
            > 3 axially clocked feed rollers (2) opposite the profiling spindle
            8 positions using pneumatic turret, for spindle 1,2,3
            > 3 table tops indexed to the tool diameter (2 positions), profile spindle
            No. 3 and fitting spindle
            > 3 rung support rails cycled vertically after the last profiling spindle
            > Feed height adjustment with NC axis
            > Divided pressure ruler on the left for wood widths of 40-140 mm
            > Double parts package
            > Return conveyor device for 1-man operation: slat conveyor
            > Screen controls
            > Pitched window installation
            > electronic angle display for sloping windows
            > Control: NEXUS PC control
            > VARIOplus package for tapping and slotting table, including length stop,
            CNC-controlled, 4,500 mm timber length, including studio window installation,
            Swivel angle 75 degrees, horizontal CNC axis, adjustment range 200 mm
            > Automatic central lubrication
            > Air conditioning unit in the control cabinet

            Option:
            > used window tools OERTLI IV 68, 78 wood and wood-aluminium

            Should the technical characteristics of this machine not meet your expectations
            correspond, please contact us. Our longtime
            experienced team will be happy to support you with any adjustments or with the
            Find a machine that suits your needs!

            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6 NC Spindeln


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6830 · Window production centre

          WEINIG - Unicontrol 6 NC Spindeln - - gebraucht -

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱
          Weinig Unicontrol 6 with NC spindles ----------------------------------- Technical data summary (please inquire about any additional accessories included) ................................... Generally ----------------------------------- > Loading dimensions: 7000 x 2400 x 2400 mm > Machine weight, approx.: 3700 kg crosscut saw ----------------------------------- > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Laser directional light to detect the saw section Electronically safe length stop ----------------------------------- > Length 3600 mm 1. Tap and slot spindle ---------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle (synchronous and counter-rotation) ----------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle ----------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ------------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Tool clamping length: 160 mm > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3 kW 4. Grooving device clocked horizontally + vertically at the top ------------------------------------- > Number of tools: 2 pieces. > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 130 mm > Motor power: 3 kW Other features ------------------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor system for 1-man operation > Screen controls > Slanted window device > Electronic angle display for sloping windows: > Control: PC control Nexus, CNC > Option: > Tools IV 68 Oertli > Tools IV 78 Leitz > Tools IV 92 Leitz If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! ----------------------------------- (technical information according to the manufacturer - no guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            Description :
            Weinig Unicontrol 6 with NC spindles
            -----------------------------------

            Technical data summary
            (please inquire about any additional accessories included)
            ...................................

            Generally
            -----------------------------------
            > Loading dimensions: 7000 x 2400 x 2400 mm
            > Machine weight, approx.: 3700 kg

            crosscut saw
            -----------------------------------
            > Electronic crosscut saw, horizontally infinitely adjustable
            > Number of tools: 1 piece.
            > Spindle speed: 2800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3 kW
            > Laser directional light to detect the saw section

            Electronically safe length stop
            -----------------------------------
            > Length 3600 mm


            1. Tap and slot spindle
            ----------------------------------
            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Spindle stroke vertical adjustment continuously
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW

            1. Profiling spindle (synchronous and counter-rotation)
            -----------------------------------
            > Position: vertical right
            > Number of tools: 1 piece.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW

            2. Profiling spindle
            -----------------------------------
            > Position: vertical right
            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Spindle stroke vertical adjustment continuously
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW
            3. Profiling spindle (fittings spindle)
            -------------------------------------
            > Position: vertical right
            > Number of tools: 3 pieces.
            > Tool clamping length: 160 mm
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 210 mm
            > Motor power: 3 kW

            4. Grooving device clocked horizontally + vertically at the top
            -------------------------------------
            > Number of tools: 2 pieces.
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 130 mm
            > Motor power: 3 kW

            Other features
            -------------------------------------
            > online capable
            > Folding device for tear-free folding
            > Double parts package
            > Return conveyor system for 1-man operation
            > Screen controls
            > Slanted window device
            > Electronic angle display for sloping windows:
            > Control: PC control Nexus, CNC
            > Option:
            > Tools IV 68 Oertli
            > Tools IV 78 Leitz
            > Tools IV 92 Leitz

            If the technical characteristics of this machine do not meet your expectations
            correspond, please contact us. Our long-standing
            Our experienced team will be happy to support you with any adjustments or
            Find a machine that meets your needs!
            -----------------------------------
            (technical information according to the manufacturer - no guarantee!)



        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2725 · Window production centre

          WEINIG - Unicontrol 6 - - gebraucht - Südtron BT 20

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱control Südtron BT 20
          Weinig Unicontrol 6 --------------------------------- General data --------------------------------- Loading dimensions approx. 5000x2400x2400 Machine weight approx. 3000 kg crosscut saw --------------------------------- > Pneumatic crosscut saw, against 8-fold turret stop > Spindle speed: 2800 > Spindle diameter: 40 mm > Tool diameter max.: 350 mm > Motor power: 3 kW > Laser directional light to detect the saw section Length stop - clocked --------------------------------- > Length stop 2700 mm 1. Tap and slot spindle --------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle - synchronous spindle (synchronous and counter-rotation) ---------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle --------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ---------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Spindle speed: 6000 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 180 mm > Motor power: 3 kW > Clamping length 150 mm > Horizontal: 2 positions > Vertical: 3 positions 4. Glass bead saw pneumatically up and down ---------------------------------- > Motor 3 kW Other features ---------------------------------- > Folding device for tear-free folding > Double parts package > Screen control 99 programs Sütron BT20 > Slanted window device > Electronic angle display for sloping windows > Return roller conveyor with push-off device > CE mark (technical data according to the manufacturer - no guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            control Südtron BT 20
            Description :
            Weinig Unicontrol 6
            ---------------------------------

            General data
            ---------------------------------

            Loading dimensions approx. 5000x2400x2400
            Machine weight approx. 3000 kg

            crosscut saw
            ---------------------------------

            > Pneumatic crosscut saw, against 8-fold turret stop
            > Spindle speed: 2800
            > Spindle diameter: 40 mm
            > Tool diameter max.: 350 mm
            > Motor power: 3 kW
            > Laser directional light to detect the saw section

            Length stop - clocked
            ---------------------------------
            > Length stop 2700 mm

            1. Tap and slot spindle
            ---------------------------------

            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW

            1. Profiling spindle - synchronous spindle (synchronous and counter-rotation)
            ----------------------------------

            > Position: vertical right
            > Number of tools: 1 piece.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW

            2. Profiling spindle
            ---------------------------------

            > Position: vertical right
            > Number of tools: 3/4 pieces.
            > Tool clamping length: 320 mm
            > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW

            3. Profiling spindle (fittings spindle)
            ----------------------------------

            > Position: vertical right
            > Number of tools: 3 pieces.
            > Spindle speed: 6000 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 180 mm
            > Motor power: 3 kW
            > Clamping length 150 mm
            > Horizontal: 2 positions
            > Vertical: 3 positions

            4. Glass bead saw pneumatically up and down
            ----------------------------------
            > Motor 3 kW

            Other features
            ----------------------------------

            > Folding device for tear-free folding
            > Double parts package
            > Screen control 99 programs Sütron BT20
            > Slanted window device
            > Electronic angle display for sloping windows
            > Return roller conveyor with push-off device
            > CE mark

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 9.500 €
          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6 NC Spindeln


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2654 · Window production centre

          WEINIG - Unicontrol 6 NC Spindeln - - gebraucht - Weinig, PC-Nexus

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus
          #2654 Weinig Unicontrol 6 with NC spindles ------------------------------------------------------ Machine is checked, ready for demonstration Specifications summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ---------------------------- > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.0 kW > Laser guide light for detecting the sawing section electronic length stop, mounted on slotted table included Positioning of the cross-cut saw integrated in the control. > Length 3500mm Pos. 2: tapping and slotted spindle ---------------------------- > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (synchronous spindle) ---------------------------- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ---------------------------- > Position: vertical right > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler at the stop (synchronous spindle area), Rung support strip from above in the area of ??the profile milling unit, vertically on the right and profiling spindle. Pos. 5: Profile milling unit horizontally above ---------------------------- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool cutting circle max. 130 mm > Axial adjustment range 30 mm, 2 positions > Radial adjustment range 125 mm, 8 positions Item 6: 3rd profiling spindle (fitting spindle) ---------------------------- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment path 100 mm, 8 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Other features ---------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Industrial PC, PC control/NEXUS > Weinig type production program If the technical characteristics of this machine do not meet your expectations please contact us. Our experienced team will be happy to support you with any adjustments or looking for an alternative machine that meets your requirements! (technical data according to the manufacturer - without guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            control Weinig, PC-Nexus
            Description :
            #2654 Weinig Unicontrol 6 with NC spindles
            ------------------------------------------------------
            Machine is checked, ready for demonstration

            Specifications summary
            (please inquire about any additional accessories included)


            Pos. 1: Crosscut saw
            ----------------------------
            > Crosscut saw electronically, horizontally infinitely adjustable
            > Number of tools: 1 pc.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3.0 kW
            > Laser guide light for detecting the sawing section

            electronic length stop, mounted on slotted table included
            Positioning of the cross-cut saw integrated in the control.
            > Length 3500mm

            Pos. 2: tapping and slotted spindle
            ----------------------------
            > Number of tools: variable, infinitely variable NC axis adjustment
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max.: 320 mm
            > Motor power: 11 kW


            Pos. 3: 1st profiling spindle (synchronous spindle)
            ----------------------------
            > Position: vertical right
            > Number of tools: 1 pc.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 7.5 kW


            Pos. 4: 2nd profiling spindle
            ----------------------------
            > Position: vertical right
            > Number of tools: variable, infinitely variable NC axis adjustment
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max.: 232 mm
            > Motor power: 11 kW

            2 feed rollers opposite the spindle axially pneumatically controlled, 2
            positions

            Rung guide consisting of:
            Guide ruler at the stop (synchronous spindle area),
            Rung support strip from above in the area of ??the profile milling unit,
            vertically on the right
            and profiling spindle.


            Pos. 5: Profile milling unit horizontally above
            ----------------------------
            > Clamping length: 40 mm
            > Spindle diameter: 40 mm
            > Motor power: 3.0 kW
            > Speed ??5,850 rpm
            > Tool cutting circle max. 130 mm
            > Axial adjustment range 30 mm, 2 positions
            > Radial adjustment range 125 mm, 8 positions


            Item 6: 3rd profiling spindle (fitting spindle)
            ----------------------------
            > Position: vertical right
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm, 8 positions
            > Radial adjustment path 100 mm, 8 positions
            > Spindle speed: 5,850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max.: 210 mm
            > Motor power: 3.0 kW

            Other features
            ----------------------------
            > online capable
            > Folding device for tear-free folding
            > Double parts package
            > Return conveyor device for 1-man operation: slat conveyor
            > Screen controls
            > Pitched window installation
            > electronic angle display for sloping windows
            > Industrial PC, PC control/NEXUS
            > Weinig type production program

            If the technical characteristics of this machine do not meet your expectations
            please contact us. Our experienced team will be happy to support you with any
            adjustments or looking for an alternative machine that meets your requirements!

            (technical data according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 12 NC


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2728 · Window production centre

          WEINIG - Unicontrol 12 NC - - gebraucht - Weinig, PC-Nexus

          Technical details
          Tenoning spindle 2 St.︱Number of milling agregates 7 St.︱Spindle diameter 50 mm︱control Weinig, PC-Nexus
          Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ................................................ Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ................................................ crosscut saw ................................................ > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ................................................ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ................................................ > Length 4500 mm 1. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ................................................ Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 3. Profile milling unit (grooving device from above) ................................................ > Position: horizontal at the top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 30 mm NC axis, infinitely variable > Radial adjustment path 125 mm NC axis, infinitely variable > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 4. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Rung support bar clocked vertically after the last profiling spindle 5. Profile milling unit (fittings spindle) ................................................ > Position: vertical right > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment path 115 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 6. Profile milling unit (grooving device from above), in the additional stand ................................................ > Position: working vertically to the right from above > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 44 mm, 8 positions using a pneumatic turret > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 9,000 rpm > Tool flight circle max.: 130 mm 7. Profiling spindle (grooving device from below, in the additional stand) ................................................ > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment path 100 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions Other features ................................................ > online capable > Folding device for tear-free folding > Milling carriage for milling sashes with frame widths under 500 mm. Automatic pneumatic clamping > 9 feed rollers controlled up/down after the last profiling spindle faster and shorter milling process > Feed height adjustment with NC axis > Divided pressure ruler on the left, pneumatic, divided for wood widths 40-140 mm > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Control: NEXUS PC control > Vario table with horizontal NC axis > Automatic central lubrication > Air conditioning unit in the control cabinet > Machine without processing tools If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! (Technical information according to the manufacturer - no guarantee!)
            Tenoning spindle 2 St.
            Number of milling agregates 7 St.
            Spindle diameter 50 mm
            control Weinig, PC-Nexus
            Description :
            Weinig Unicontrol 12
            with radial and axial CNC spindles as well as VARIO table and milling carriage
            ................................................
            Machine dismantled professionally and in our warehouse in 73447 Oberkochen.
            Video and pictures were taken before dismantling.

            Technical data summary
            (please inquire about any additional accessories included)
            ................................................

            crosscut saw
            ................................................
            > Electronic crosscut saw, horizontally infinitely adjustable
            > Number of tools: 1 piece.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max.: 400 mm
            > Motor power: 3.7 kW
            > Laser directional light to detect the saw section
            > Axial adjustment path 150 mm NC axis, electronically infinitely variable
            > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above

            Rounding aggregate
            ................................................
            > Position: horizontally below
            > Motor power: 1.5 kW
            > Spindle diameter: 20 mm
            > Tool clamping length: 25 mm
            > Spindle speed: 9,000 rpm
            > Tool diameter: max. 130 mm
            > Axial adjustment path mechanically coupled with crosscut saw.
            > Radial adjustment pneumatically controlled on/off

            electronic length stop
            ................................................
            > Length 4500 mm

            1. Tap and slot spindle
            ................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment path: 580 mm NC axis, continuously variable
            > Spindle speed: 2,800 rpm
            > Tool diameter: max. 400 mm
            > Overtravel counter, complete clamping length is countered

            2. Tap and slot spindle
            ................................................
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment path: 580 mm NC axis, continuously variable
            > Spindle speed: 2,800rpm
            > Tool diameter: max. 400 mm
            > Overtravel counter, complete clamping length is countered

            Transfer tape
            ................................................
            Included for transferring the parts to longitudinal machining
            Separation of double parts before the start of longitudinal processing.

            1. Profiling spindle (synchronous and counter-rotation)
            ................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 2 feed rollers axially pneumatically controlled opposite the spindle,
            8 positions
            > Table top pneumatically controlled to the tool diameter


            2. Profiling spindle
            ................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 2 feed rollers axially pneumatically controlled opposite the spindle,
            8 positions
            > Table top pneumatically controlled to the tool diameter


            3. Profile milling unit (grooving device from above)
            ................................................
            > Position: horizontal at the top
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment path 30 mm NC axis, infinitely variable
            > Radial adjustment path 125 mm NC axis, infinitely variable
            > Spindle speed: 9000 rpm
            > Tool flight circle max.: 130 mm
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 1 feed roller axially pneumatically controlled opposite the spindle,
            2 positions

            4. Profiling spindle
            ................................................
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, infinitely variable
            > Radial adjustment path 80 mm NC axis, infinitely variable
            > Spindle speed: 6000 rpm
            > Tool flight circle min.: 140 mm
            > Tool flight circle max.: 232 mm
            > 2 feed rollers axially pneumatically controlled opposite the spindle,
            8 positions
            > Rung support bar clocked vertically after the last profiling spindle

            5. Profile milling unit (fittings spindle)
            ................................................
            > Position: vertical right
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 160 mm
            > Axial adjustment path 115 mm NC axis, infinitely variable
            > Radial adjustment path 100 mm NC axis, infinitely variable
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 210 mm
            > 1 feed roller axially pneumatically controlled opposite the spindle,
            2 positions


            6. Profile milling unit (grooving device from above), in the additional stand
            ................................................
            > Position: working vertically to the right from above
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment range 44 mm, 8 positions using a pneumatic turret
            > Radial adjustment path 100 mm NC axis, infinitely variable
            > Spindle speed: 9,000 rpm
            > Tool flight circle max.: 130 mm

            7. Profiling spindle (grooving device from below, in the additional stand)
            ................................................
            > Position: horizontally below
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 125 mm
            > Axial adjustment path 100 mm NC axis, infinitely variable
            > Radial adjustment path 100 mm NC axis, infinitely variable
            > Spindle speed: 5850 rpm
            > Tool flight circle max.: 200 mm
            > 1 feed roller axially pneumatically controlled opposite the spindle,
            2 positions


            Other features
            ................................................

            > online capable
            > Folding device for tear-free folding
            > Milling carriage for milling sashes with frame widths under 500 mm.
            Automatic pneumatic clamping
            > 9 feed rollers controlled up/down after the last profiling spindle
            faster and shorter milling process
            > Feed height adjustment with NC axis
            > Divided pressure ruler on the left, pneumatic, divided for wood widths 40-140
            mm
            > Double parts package
            > Return conveyor for 1-man operation: slat conveyor
            > Screen controls
            > Slanted window device
            > Electronic angle display for sloping windows
            > Control: NEXUS PC control
            > Vario table with horizontal NC axis
            > Automatic central lubrication
            > Air conditioning unit in the control cabinet
            > Machine without processing tools


            If the technical characteristics of this machine do not meet your expectations
            correspond, please contact us. Our long-standing
            Our experienced team will be happy to support you with any adjustments or
            Find a machine that meets your needs!

            (Technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Window production centre Gubisch Centromat CW 1


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6784 · Window production centre

          Gubisch - Centromat CW 1 - - gebraucht -

          Technical details
          Tenoning spindle 1 Stk.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱
          1 for window and door production with 50 mm spindles in the longitudinal profiling. With the following processing stations and options: - One-sided slot machine for straight and sloping connections - Milling machine with glazing bead cutting unit for longitudinal profiling - Circumferential operation with synchronous milling unit and automatic immersion. - Swivel frame support up to 650 mm - Fitting grooving unit - Central control 1.0 crosscut saw automatically plunging in from above - Engine power, including engine brake 3.0 kW - Spindle speed 2800 rpm. - Flight circle diameter 350 mm - Spindle diameter 30 mm Æ - Clamping flange, 1 driver 6 mm Æ TC 42 mm 120 mm dia. - Pneumatic vertical stroke 100 mm - Pneumatic horizontal stroke 160 mm against 2 manual 6-fold turret stops - Chip extraction hood with extraction nozzle 100 mm Æ 2.0 slot unit - Engine power, including engine brake 9.2 kW - Spindle speed 3800 rpm. - flight circle diameter 320 mm max. - Spindle diameter 50 mm - Effective spindle length 300 mm - Pneumatic fixed vertical stroke 2 x 100 mm - suitable for 3 sets of tools - Zero height 10 mm - Chip extraction hood with extraction socket Æ 160 mm 3.0 slot table - Table height above floor 920 mm - Feed automatic, with 2 speeds - Slow 7m/min. - Fast 14 m/min. - Engine power including engine brake 0.21/0.30 kW - Drive can be disengaged for manual feed (oblique cuts) - Pneumatic workpiece clamping - Clamping cylinder 1 piece with 2 additional pressure shoes 3.1 Timber device - Counter wood changer with 2-fold automatic change and with man. rotation of 180 degrees, 2 further subtractions possible, which are then also in automatic mode counter. 3.2 Length stop - Stop system with 3 scales for a) outer frame b) Wings erect on the outside c) Outer wing transversely - Manual adjustment - Length 2300mm - pivotable +/- 60 degrees for inclined windows 3.3 Angle transfer - Automatically via vertically clocked feed roller in the milling feed 4.0 milling machine for longitudinal profiling and folding of windows/doors with the following Aggregates: 4.1 Down milling unit with plunge automatic - synchronization - Automatic immersion can be used for folding - Engine power including engine brake 7.5 kW - Spindle speed 6000 rpm. - flight circle diameter 240 mm max. - Side stops adjustable for zero Æ 140 mm max. of tools 112 mm min. - Zero height 10 mm - Spindle diameter 50 mm Æ - Effective spindle length 100 mm - Pneumatic horizontal stroke 80 mm - Chip extraction hood with extraction socket Æ 120 mm 4.2 Profiling unit - reverse - Engine power including engine brake 9.2 kW - Spindle speed 6000 rpm. - flight circle diameter 240 mm max. - Side stops adjustable for zero Æ 140 mm max. of tools 112 mm min. - Zero height 10 mm - Spindle diameter 50 mm Æ - Effective spindle length 300 mm - Vertical stroke pneumatically fixed 1 x 100 mm suitable for 3 sets of tools a 100 mm 2 x 100 mm - Chip extraction hood with extraction socket Æ 140 mm 4.3 Grooving unit - reverse - Engine power including engine brake 3.0 kW - Spindle speed 6,000 rpm. - flight circle diameter Profile depth 30 mm (hardware groove depth) 200 mm fixed - Zero height 10 mm - Spindle diameter 50 mm Æ - Effective spindle length 100 mm - Horizontal stroke 80 mm - Chip extraction with extraction socket Æ 120 mm 4.4 Glazing bead saw unit - reverse - Engine power including engine brake 3.0 kW - Spindle speed 3,000 rpm. - Spindle diameter 30 mm - Effective spindle length 15 mm - Radius of flight 200 mm - Clamping flange, 1 driver 6 mm Æ TC 42 mm 85 mm Æ - Pneumatic vertical stroke 100 mm - Pneumatically clocked glazing bead removal incl. anti-recoil device - Chip extraction hood with extraction socket Æ 80 mm 4.5 Advance - Motor power 0.75 kW - Feed speed 8 m/min. - Feed roller diameter 100 mm - Roller spacing in the area of ??the processing units 110 mm in the infeed area 200 mm - Feed rollers individually adjustable at an angle to the stop 4.6 Vertical right stops - Height 85mm - Stop 1 + 2 for 1 mm chip removal set - adjustable for zero diameter 112 - 140 mm 5.0 workpiece return device - The finished workpieces come over an inclined roller conveyor back to the serving staff. 6.0 central control - Clear central control panel with standard control and semi-automatic in the slot or profile milling unit (3 programs for window frame production IV). - Single and linked operation with automatic angle transfer function - with recirculation circuit including 4-step control - Grooving unit for edge gear cutters can be controlled at the push of a button - very simple, easy to understand, logically structured handling of the control 7.0 Technical connection data - Compressed air connection 3/8" 8 bar - Compressed air consumption approx. 40 NL/min. (prepared air according to Pneurop 6611) - Extraction air volume 135 m3/min. - Operating voltage 3 phases, 380 volts, 50 Hz. - Total connection value 36.16 kW - Extraction air speed 32 m/sec. - Electrical equipment according to VDE - Loading weight approx. 3500 kg * The machine is designed according to German regulations and standards. * Paint RAL 60 11 green * Tools IV 68/78 wood/aluminium - Technical information according to the manufacturer, without guarantee!
            Tenoning spindle 1 Stk.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            Description :
            1 for window and door production
            with 50 mm spindles in the longitudinal profiling.

            With the following processing stations and options:

            - One-sided slot machine for straight and sloping connections
            - Milling machine with glazing bead cutting unit for longitudinal profiling
            - Circumferential operation with synchronous milling unit and automatic
            immersion.
            - Swivel frame support up to 650 mm
            - Fitting grooving unit
            - Central control

            1.0 crosscut saw automatically plunging in from above

            - Engine power, including engine brake 3.0 kW
            - Spindle speed 2800 rpm.
            - Flight circle diameter 350 mm
            - Spindle diameter 30 mm Æ
            - Clamping flange, 1 driver 6 mm Æ
            TC 42 mm 120 mm dia.
            - Pneumatic vertical stroke 100 mm
            - Pneumatic horizontal stroke 160 mm
            against 2 manual 6-fold turret stops
            - Chip extraction hood with extraction nozzle 100 mm Æ

            2.0 slot unit

            - Engine power, including engine brake 9.2 kW
            - Spindle speed 3800 rpm.
            - flight circle diameter 320 mm max.
            - Spindle diameter 50 mm
            - Effective spindle length 300 mm
            - Pneumatic fixed vertical stroke 2 x 100 mm
            - suitable for 3 sets of tools
            - Zero height 10 mm
            - Chip extraction hood with extraction socket Æ 160 mm

            3.0 slot table

            - Table height above floor 920 mm
            - Feed automatic, with 2 speeds
            - Slow 7m/min.
            - Fast 14 m/min.
            - Engine power including engine brake 0.21/0.30 kW
            - Drive can be disengaged for manual feed
            (oblique cuts)
            - Pneumatic workpiece clamping
            - Clamping cylinder 1 piece with 2 additional pressure shoes

            3.1 Timber device
            - Counter wood changer with 2-fold automatic change and with man. rotation of
            180 degrees, 2
            further subtractions possible, which are then also in automatic mode
            counter.

            3.2 Length stop
            - Stop system with 3 scales for a) outer frame
            b) Wings erect on the outside
            c) Outer wing transversely
            - Manual adjustment
            - Length 2300mm
            - pivotable +/- 60 degrees for inclined windows

            3.3 Angle transfer
            - Automatically via vertically clocked feed roller in the milling feed

            4.0 milling machine
            for longitudinal profiling and folding of windows/doors with the following
            Aggregates:

            4.1 Down milling unit with plunge automatic
            - synchronization
            - Automatic immersion can be used for folding
            - Engine power including engine brake 7.5 kW
            - Spindle speed 6000 rpm.
            - flight circle diameter 240 mm max.
            - Side stops adjustable for zero Æ 140 mm max.
            of tools 112 mm min.
            - Zero height 10 mm
            - Spindle diameter 50 mm Æ
            - Effective spindle length 100 mm
            - Pneumatic horizontal stroke 80 mm
            - Chip extraction hood with extraction socket Æ 120 mm

            4.2 Profiling unit

            - reverse
            - Engine power including engine brake 9.2 kW
            - Spindle speed 6000 rpm.
            - flight circle diameter 240 mm max.
            - Side stops adjustable for zero Æ 140 mm max.
            of tools 112 mm min.
            - Zero height 10 mm
            - Spindle diameter 50 mm Æ
            - Effective spindle length 300 mm
            - Vertical stroke pneumatically fixed 1 x 100 mm
            suitable for 3 sets of tools a 100 mm 2 x 100 mm
            - Chip extraction hood with extraction socket Æ 140 mm

            4.3 Grooving unit

            - reverse
            - Engine power including engine brake 3.0 kW
            - Spindle speed 6,000 rpm.
            - flight circle diameter
            Profile depth 30 mm (hardware groove depth) 200 mm fixed
            - Zero height 10 mm
            - Spindle diameter 50 mm Æ
            - Effective spindle length 100 mm
            - Horizontal stroke 80 mm
            - Chip extraction with extraction socket Æ 120 mm

            4.4 Glazing bead saw unit
            - reverse
            - Engine power including engine brake 3.0 kW
            - Spindle speed 3,000 rpm.
            - Spindle diameter 30 mm
            - Effective spindle length 15 mm
            - Radius of flight 200 mm
            - Clamping flange, 1 driver 6 mm Æ
            TC 42 mm 85 mm Æ
            - Pneumatic vertical stroke 100 mm
            - Pneumatically clocked glazing bead removal
            incl. anti-recoil device
            - Chip extraction hood with extraction socket Æ 80 mm

            4.5 Advance
            - Motor power 0.75 kW
            - Feed speed 8 m/min.
            - Feed roller diameter 100 mm
            - Roller spacing
            in the area of ??the processing units 110 mm
            in the infeed area 200 mm
            - Feed rollers individually adjustable at an angle to the stop

            4.6 Vertical right stops
            - Height 85mm
            - Stop 1 + 2 for 1 mm chip removal
            set
            - adjustable for zero diameter 112 - 140 mm

            5.0 workpiece return device
            - The finished workpieces come over an inclined roller conveyor
            back to the serving staff.

            6.0 central control

            - Clear central control panel with standard control and
            semi-automatic
            in the slot or profile milling unit
            (3 programs for window frame production IV).
            - Single and linked operation with automatic angle transfer function
            - with recirculation circuit including 4-step control
            - Grooving unit for edge gear cutters can be controlled at the push of a button
            - very simple, easy to understand, logically structured handling of the control

            7.0 Technical connection data
            - Compressed air connection 3/8" 8 bar
            - Compressed air consumption approx. 40 NL/min.
            (prepared air according to Pneurop 6611)
            - Extraction air volume 135 m3/min.
            - Operating voltage 3 phases, 380 volts, 50 Hz.
            - Total connection value 36.16 kW
            - Extraction air speed 32 m/sec.
            - Electrical equipment according to VDE
            - Loading weight approx. 3500 kg

            * The machine is designed according to German regulations and standards.

            * Paint RAL 60 11 green

            * Tools IV 68/78 wood/aluminium

            - Technical information according to the manufacturer, without guarantee!




        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 1.500 €
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          RUCHSER -