Fitting centre
Machinelist: Fitting centre
Fitting centre
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2659 · Fitting centre
RUCHSER - RU-BM-3000 Flügelmontagetisch - - Vorfuehrmaschine -
Technical details
RUCHSER wing assembly table RU-BM-3000 year of manufacture 2022 ----------------------------------------------------- The Ruchser sash fitting center enables efficient production post-economic aspects. Thought through to the last detail, the system maximum ease of use. Important advantages for you: Modular system, according to your wishes and requirements Grand piano assembly table put together Easy to use, even for inexperienced workers Equipment demonstration machine, alternative/optional equipment on request! Item 1.0: Item no. : 0610000 RU-BM-3000, sash assembly table, for sashes up to a maximum height of 2500 mm with RU-SH, special screwdriver length 3000 mm, width 1400 mm, incline of Working platform manually adjustable. Holder for hardware scissors or hardware punch. 10 pieces swiveling commuters to hang the Wing, completely pneumatically foldable to unimpeded movement of the wings on the tabletop. Device for scanning the sash fitting length for a constant and variable/central grip position and any handle seat height for already pre-drilled Sashes, colored measurement recognition for the fittings. Commuter height at a stop optionally set to 50 or 60 mm adjustable. RU-SH, special screwdriver with pneumatic Depth switch mounted on trolley, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container Manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw planes mounted on the carriage. RA-4 commuter rail in depth manual adjustable to the left and right one each 4-fold revolver stop. PSF - Pneumatic clamping device for wings against the side stops. Working height adjustable from 900 - 1000 mm. Please also specify whether felt, sliding or brushes perform as a requirement. Item 1.1: Item no. : 0500000 Bracket matched to customer punch/- scissors.For installing a customer-supplied Fitting punch or fitting scissors (other brand) at the wing assembly table. Please specify make when ordering !!! Note: A Somatec punch is attached to this demonstration table. This can be purchased as an option. Otherwise, the punch must be provided by the customer (by the hardware manufacturer) Item 1.2: Item no. : 6309 RU-BM-... Siegenia fitting discontinued Alternatively also adjustable to other fittings! Item 1.3: Item no. : 0710000 RU-SBL3000/30 free-standing fitting bearing, length 3100 mm, depth 1250 mm, height 2050 mm, stand frame on the front without supports, 30 compartments, 10 pieces each in a row Divided partitions and a continuous shelf top, size of the compartments: width 280 mm, height 150 mm. ----------------------------------------------------- Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6290 · Fitting centre
Powasert - Drehschrauber mit Zufuerung - - neu -
Technical details
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6388 · Fitting centre
RUCHSER - Montagelinie Video - - neu -
Technical details
Assembly line consisting of: Item 1.0 / 0610005 RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2.0 / 10603200 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3.0 / 614-601 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155 Warranty 12 months excluding wearing parts Documentation 1-fold digital in German including CE declaration of conformity Item 4.0 / 10229018 Vacuum lifter with integrated electric chain hoist 90° / 200 kg for vertical and horizontal transport of flat, sealed glass panes. Vacuum generation with pneumatic ejector Push-off device for quickly releasing the plates and releasing the load only by double actuation (2 buttons) Safety vacuum storage including check valve is required by law. Audible safety warning device and vacuum pressure gauge with red/green area Energy saving device for vacuum generation and stroke safety circuit Pneumatic swivel unit with swivel range 90° Load capacity: 0-200 kg Lifting speed: 0-10m/min continuously using Frequency converter Lifting height: approx. 1.8m Operating voltage: 1x230V/50Hz Operating pressure: at least 6-7 bar of filtered compressed air Air consumption: approx. 1NI/sec. Weight: approx. 75 kg Painted in RAL 1018 zinc yellow Recording with a longitudinal beam and 4 pieces Suction plates D=290 mm Adjustment range, external dimensions of the suction plate Vertical 600-1000 mm Horizontally 800-1000 mm Comfort control The comfort control includes stepless raising and lowering through a frequency converter (required for gentle hanging up), All commands for the hoist and the vacuum lifter are in one common control unit - Special handling switch - housed. This makes it easier to operate the system and manage it Load possible in one-hand operation. Assembly - slewing crane and instruction on wing assembly table with aluminum screw machine Price on request! Packaging Price on request! transport Price on request! (Technical description according to manufacturer - no guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6843 · Fitting centre
RUCHSER - RU-BM 2500 - - gebraucht -
Technical details
Ruchser RU-BM 2500 ---------------------- Fitting table with fitting shelf 30 compartments with olive drilling rig Uniqick 2000 screw magazine with feed to the hand screwdriver Selling ex location, can still be viewed in use! (technical information according to the manufacturer - without guarantee!)
1.500 €
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6851 · Fitting centre
STRIFFLER - Fluegelanschlagtisch - - gebraucht -
Technical details
Striffler wing stop table from operational liquidation of our customer ---------------------------- Self-dismantling and loading by buyer ---------------------------- (Technical information according to the manufacturer - no guarantee!
1.500 €
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6824 · Fitting centre
RUCHSER - RU-BM 2500 - - gebraucht -
Technical details
Ruchser RU-BM-2500 fitting center with fitting storage, mobile ------------------------------------------------------ Pivoting stops Pneumatic magazine screwdriver Fittings shelf 30 compartments with lower storage compartments Support table covered with felt Special screwdriver Screw feeder fitting punch Mobile table Wood thickness 90 mm possible. Customer processed Siegenai Titan AF fitting. Can be adjusted to other fittings. Overall dimensions with shelf approx.: 3200 mm x 2000 mm x 2160 mm Dimensions of work table approx: length 2520 mm, depth 1,370 mm (Technical information according to manufacturer - no guarantee!)
Datasheet
Request / Contact
Window production centre
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2732 · Window production centre
WEINIG - Unicontrol 6 NC Spindeln - - neuwertig - Weinig, PC-Nexus
Technical details
# 2732 Weinig Unicontrol 6 with NC spindles ------------------------------------------------ Machine is in checking process at the moment! Technical data summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ------------------------------------------------ > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser directional light to detect the saw section Pos. 2: Rounding unit horizontally at the bottom ------------------------------------------------ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Adjustment path axially mechanically coupled to crosscut saw > Adjustment path radially pneumatically controlled on/off Length stop CNC controlled ------------------------------------------------ > Length 3500 mm > electronic length stop Pos. 3: Tap and slot spindle ------------------------------------------------ > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, CNC > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 4: 1. Profiling spindle (synchronous and counter-rotation) ------------------------------------------------ > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ------------------------------------------------ > Position: vertical right > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable, NC > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (area of synchronous spindle), Rung support bar from above in the area of the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontally at the top ------------------------------------------------ > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed 9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment path 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fittings spindle) ------------------------------------------------ > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Pos. 8: Profile milling unit/grooving unit from below ------------------------------------------------ > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 100 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 200 mm Other features ------------------------------------------------ > online capable > Electric feed height adjustment including mechanical digital display and manual feed beam clamping > Folding device for tear-free folding > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Industrial PC, touchscreen with Windows PC control/NEXUS > with Weinig type production program Suction nozzle diameter: ------------------------------------------------ Crosscut saw 80 mm Slotted spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Fitting spindle 120 mm Grooving device from above 80 mm Grooving device from below 80 mm Option: used tools Oertli IV 68/78 wood and wood-aluminium (see warehouse number 6813) The technical characteristics of this machine should meet your expectations do not correspond, please contact us. Our A team with many years of experience will be happy to support you with any adjustments or when looking for a machine that meets your requirements! (technical data according to the manufacturer - no guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2728 · Window production centre
WEINIG - Unicontrol 12 NC - - gebraucht - Weinig, PC-Nexus
Technical details
Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ................................................ Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ................................................ crosscut saw ................................................ > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ................................................ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ................................................ > Length 4500 mm 1. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ................................................ > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ................................................ Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 3. Profile milling unit (grooving device from above) ................................................ > Position: horizontal at the top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 30 mm NC axis, infinitely variable > Radial adjustment path 125 mm NC axis, infinitely variable > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 4. Profiling spindle ................................................ > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Rung support bar clocked vertically after the last profiling spindle 5. Profile milling unit (fittings spindle) ................................................ > Position: vertical right > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment path 115 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions 6. Profile milling unit (grooving device from above), in the additional stand ................................................ > Position: working vertically to the right from above > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 44 mm, 8 positions using a pneumatic turret > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 9,000 rpm > Tool flight circle max.: 130 mm 7. Profiling spindle (grooving device from below, in the additional stand) ................................................ > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment path 100 mm NC axis, infinitely variable > Radial adjustment path 100 mm NC axis, infinitely variable > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm > 1 feed roller axially pneumatically controlled opposite the spindle, 2 positions Other features ................................................ > online capable > Folding device for tear-free folding > Milling carriage for milling sashes with frame widths under 500 mm. Automatic pneumatic clamping > 9 feed rollers controlled up/down after the last profiling spindle faster and shorter milling process > Feed height adjustment with NC axis > Divided pressure ruler on the left, pneumatic, divided for wood widths 40-140 mm > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Control: NEXUS PC control > Vario table with horizontal NC axis > Automatic central lubrication > Air conditioning unit in the control cabinet > Machine without processing tools If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! (Technical information according to the manufacturer - no guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2711 · Window production centre
WEINIG - Unicontrol 12 NC - - gebraucht - CNC, Weinig PC-Nexus
Technical details
Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .................................................. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .................................................. crosscut saw .................................................. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .................................................. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop .................................................. > Length 4500mm 1. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle .................................................. > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape .................................................. Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) .................................................. > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm 4. Profiling spindle .................................................. > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 5. Profile milling unit (fitting spindle) .................................................. > Position: vertical right > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment range 115 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 210 mm 6. Profile milling unit (grooving device from above), in the additional stand .................................................. > Position: working vertically to the right from above > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment path 100 mm, 8 positions using pneumatic turret > Radial adjustment path 80 mm 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Tool flight circle max.: 180 mm 7. Profiling spindle (grooving device from below, in the additional stand) .................................................. > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment range 100 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max.: 200 mm Other features .................................................. > online capable > Folding device for tear-free folding > 2 axially clocked feed rollers opposite profile milling units, for production of narrow, short parts (e.g. glazing bars) > 3 axially clocked feed rollers (2) opposite the profiling spindle 8 positions using pneumatic turret, for spindle 1,2,3 > 3 table tops indexed to the tool diameter (2 positions), profile spindle No. 3 and fitting spindle > 3 rung support rails cycled vertically after the last profiling spindle > Feed height adjustment with NC axis > Divided pressure ruler on the left for wood widths of 40-140 mm > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Control: NEXUS PC control > VARIOplus package for tapping and slotting table, including length stop, CNC-controlled, 4,500 mm timber length, including studio window installation, Swivel angle 75 degrees, horizontal CNC axis, adjustment range 200 mm > Automatic central lubrication > Air conditioning unit in the control cabinet Option: > used window tools OERTLI IV 68, 78 wood and wood-aluminium Window cuts on request! Should the technical characteristics of this machine not meet your expectations correspond, please contact us. Our longtime experienced team will be happy to support you with any adjustments or with the Find a machine that suits your needs! (Technical information according to the manufacturer - without guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2654 · Window production centre
WEINIG - Unicontrol 6 NC Spindeln - - gebraucht - Weinig, PC-Nexus
Technical details
#2654 Weinig Unicontrol 6 with NC spindles ------------------------------------------------------ Machine is checked, ready for demonstration Specifications summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ---------------------------- > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.0 kW > Laser guide light for detecting the sawing section electronic length stop, mounted on slotted table included Positioning of the cross-cut saw integrated in the control. > Length 3500mm Pos. 2: tapping and slotted spindle ---------------------------- > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (synchronous spindle) ---------------------------- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ---------------------------- > Position: vertical right > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler at the stop (synchronous spindle area), Rung support strip from above in the area of ??the profile milling unit, vertically on the right and profiling spindle. Pos. 5: Profile milling unit horizontally above ---------------------------- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool cutting circle max. 130 mm > Axial adjustment range 30 mm, 2 positions > Radial adjustment range 125 mm, 8 positions Item 6: 3rd profiling spindle (fitting spindle) ---------------------------- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment path 100 mm, 8 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Other features ---------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor device for 1-man operation: slat conveyor > Screen controls > Pitched window installation > electronic angle display for sloping windows > Industrial PC, PC control/NEXUS > Weinig type production program If the technical characteristics of this machine do not meet your expectations please contact us. Our experienced team will be happy to support you with any adjustments or looking for an alternative machine that meets your requirements! (technical data according to the manufacturer - without guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6830 · Window production centre
WEINIG - Unicontrol 6 NC Spindeln - - gebraucht -
Technical details
Weinig Unicontrol 6 with NC spindles ----------------------------------- Technical data summary (please inquire about any additional accessories included) ................................... Generally ----------------------------------- > Loading dimensions: 7000 x 2400 x 2400 mm > Machine weight, approx.: 3700 kg crosscut saw ----------------------------------- > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Laser directional light to detect the saw section Electronically safe length stop ----------------------------------- > Length 3600 mm 1. Tap and slot spindle ---------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle (synchronous and counter-rotation) ----------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle ----------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustment continuously > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ------------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Tool clamping length: 160 mm > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3 kW 4. Grooving device clocked horizontally + vertically at the top ------------------------------------- > Number of tools: 2 pieces. > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 130 mm > Motor power: 3 kW Other features ------------------------------------- > online capable > Folding device for tear-free folding > Double parts package > Return conveyor system for 1-man operation > Screen controls > Slanted window device > Electronic angle display for sloping windows: > Control: PC control Nexus, CNC > Option: > Tools IV 68 Oertli > Tools IV 78 Leitz > Tools IV 92 Leitz If the technical characteristics of this machine do not meet your expectations correspond, please contact us. Our long-standing Our experienced team will be happy to support you with any adjustments or Find a machine that meets your needs! ----------------------------------- (technical information according to the manufacturer - no guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2725 · Window production centre
WEINIG - Unicontrol 6 - - gebraucht - Südtron BT 20
Technical details
Weinig Unicontrol 6 --------------------------------- General data --------------------------------- Loading dimensions approx. 5000x2400x2400 Machine weight approx. 3000 kg crosscut saw --------------------------------- > Pneumatic crosscut saw, against 8-fold turret stop > Spindle speed: 2800 > Spindle diameter: 40 mm > Tool diameter max.: 350 mm > Motor power: 3 kW > Laser directional light to detect the saw section Length stop - clocked --------------------------------- > Length stop 2700 mm 1. Tap and slot spindle --------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 1. Profiling spindle - synchronous spindle (synchronous and counter-rotation) ---------------------------------- > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW 2. Profiling spindle --------------------------------- > Position: vertical right > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 3. Profiling spindle (fittings spindle) ---------------------------------- > Position: vertical right > Number of tools: 3 pieces. > Spindle speed: 6000 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 180 mm > Motor power: 3 kW > Clamping length 150 mm > Horizontal: 2 positions > Vertical: 3 positions 4. Glass bead saw pneumatically up and down ---------------------------------- > Motor 3 kW Other features ---------------------------------- > Folding device for tear-free folding > Double parts package > Screen control 99 programs Sütron BT20 > Slanted window device > Electronic angle display for sloping windows > Return roller conveyor with push-off device > CE mark (technical data according to the manufacturer - no guarantee!)
7.500 €
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6864 · Window production centre
WEINIG, GOETZINGER - UC 10, Univar, SFM - - gebraucht -
Technical details
Weinig Unicontrol 10-5, built in 1993 Slotted spindle 6 x 100 mm 2 profile spindles length 320 mm, stroke 95 mm Fitting spindle with folding device with return and discharge device Weinig Univar 10 with olive drilling rig, built in 1990 3 spindles each 320 mm long, stroke 95 mm + Fitting milling device Götzinger SFM, built in 2011 -------------------------------- Milling machine for the locking parts in the frame with 4 mm clearance + Drilling corner bearing Includes tools for Weinig Unicontrol: Zuani Tools IV 68/78/90 wood, 68/78 aluminum 4 mm clearance -------------------------------- For sale on behalf of the customer ex location Machines are currently still in use -------------------------------- (Technical information according to the manufacturer - no guarantee!)
15.000 €
Datasheet
Request / Contact