,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Cross cut saw

          Machinelist: Cross cut saw


          Boring and dowel inserting machine

          used Window production: wood Boring and dowel inserting machine PIZZI Leimangabe f. Duebelbohrungen


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6480 · Boring and dowel inserting machine

          PIZZI - Leimangabe f. Duebelbohrungen - - neu -

          Technical details
          Bore diameter , ︱Number of heads horizontal , ︱Number of heads vertical ,
            Bore diameter ,
            Number of heads horizontal ,
            Number of heads vertical ,


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Boring and dowel inserting machine GÖTZINGER BLE - Video -


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5710 · Boring and dowel inserting machine

          GÖTZINGER - BLE - Video - - - neu -

          Technical details
          Bore diameter variabel mm︱Number of heads horizontal 1 St.︱Number of heads vertical 0 St.︱
          1 Götzinger dowel gluing and insertion machine BLE With the BLE, the workpieces are glued and dowelled on the front. Optional the BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stop will. A 10" touch panel allows easy operation for manual or online operation. Base frame: in a compact design, covered with sheet metal Table support approx. 800 x 200 mm position 1 ---------------------- 1 glue station full jet valve Glue quantity precisely adjustable Glue gun for counter hole gluing position 2 ---------------------- 1 stainless steel glue pump, high-pressure pump and glue hose item 3 ---------------------- 1 press-in station with dowel separation and press-in cylinder item 4 ---------------------- 1 oscillating conveyor for dowels d 8 x 50 mm with feed hose into the injection unit item 5 ---------------------- 1 processing unit with cross table, linear guide and 3NC axis motors X = 200 mm processing width Y = 120 mm processing height Z = 50 mm offset item 6 ---------------------- 1 positioning controller Touch panel 10" color 500 drilling patterns can be created and saved, which can be easily accessed when needed (1 drilling pattern can have up to 16 dowel positions) Software prepared for ONLINE connection With online control, the data for the control must be provided by the software be prepared. Our machine can then read and process this data. --------------------------------------------------------- Total price in this version Pos. 1 to Pos. 6: on request! Options with additional prices: ---------------------- item 7 ---------------------- 1 horizontal drilling unit, 1,000 W drilling motor Speed ??4,000 - 8,000 rpm, collet holder Pneumatic drill feed Surcharge: EUR 4,305.00 Additional accessories such as a larger touch screen, additional dowel station for additional dowel sizes or scanner for Program selection on request! Prices net plus statutory VAT, without packaging/shipping and without Installation. (technical data according to the manufacturer - without guarantee!)
            Bore diameter variabel mm
            Number of heads horizontal 1 St.
            Description :
            1 Götzinger dowel gluing and insertion machine BLE

            With the BLE, the workpieces are glued and dowelled on the front. Optional
            the BLE can be upgraded with a drilling unit, counter milling unit and
            longitudinal stop
            will. A 10" touch panel allows easy operation for manual
            or online operation.

            Base frame: in a compact design, covered with sheet metal
            Table support approx. 800 x 200 mm

            position 1
            ----------------------
            1 glue station
            full jet valve
            Glue quantity precisely adjustable
            Glue gun for counter hole gluing

            position 2
            ----------------------
            1 stainless steel glue pump, high-pressure pump and glue hose

            item 3
            ----------------------
            1 press-in station with dowel separation and press-in cylinder

            item 4
            ----------------------
            1 oscillating conveyor for dowels d 8 x 50 mm with feed hose
            into the injection unit

            item 5
            ----------------------
            1 processing unit with cross table, linear guide and 3NC axis motors

            X = 200 mm processing width
            Y = 120 mm processing height
            Z = 50 mm offset

            item 6
            ----------------------
            1 positioning controller

            Touch panel 10" color
            500 drilling patterns can be created and saved,
            which can be easily accessed when needed
            (1 drilling pattern can have up to 16 dowel positions)

            Software prepared for ONLINE connection
            With online control, the data for the control must be provided by the software
            be prepared.
            Our machine can then read and process this data.
            ---------------------------------------------------------

            Total price in this version Pos. 1 to Pos. 6: on request!

            Options with additional prices:
            ----------------------

            item 7
            ----------------------
            1 horizontal drilling unit, 1,000 W drilling motor
            Speed ??4,000 - 8,000 rpm, collet holder
            Pneumatic drill feed

            Surcharge: EUR 4,305.00

            Additional accessories such as a larger touch screen,
            additional dowel station for additional dowel sizes or scanner for
            Program selection on request!

            Prices net plus statutory VAT, without packaging/shipping and without
            Installation.

            (technical data according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Boring and dowel inserting machine STEMA Spinamatic GLF/HP -Video-


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5924 · Boring and dowel inserting machine

          STEMA - Spinamatic GLF/HP -Video- - - neu -

          Technical details
          Bore diameter , mm︱Number of heads horizontal , St.︱Number of heads vertical , St.︱
          SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung ---------------------------------------------------------------- komplett wie folgt : - Fahrbare Ausführung - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert. - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm. Dübellänge : min. 25 mm. – max. 60 mm. Tiefeinsetzen = 30 mm. Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für elektronische Dosierung in Verbindung ist, gespritzt . - Flexibler Arm mit Gegengewicht zum Aufhängen der Pistole . - Die Maschine stimmt mit den Vorschriften europäischer Richtlinien überein . BETRIEBSDATEN: Einfasig 220 VOLT - 50 HZ. Leistung 0,7 Kw Druckluft 6 ATM vertrocknet Luftverbrauch 1,5 NL / zyklus (technische Angaben laut Hersteller - ohe Gewähr!)
            Bore diameter , mm
            Number of heads horizontal , St.
            Number of heads vertical , St.
            Description :
            SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung
            ----------------------------------------------------------------

            komplett wie folgt :

            - Fahrbare Ausführung

            - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert.

            - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung

            - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet

            - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für
            nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm.
            Dübellänge : min. 25 mm. – max. 60 mm.
            Tiefeinsetzen = 30 mm.
            Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für
            elektronische Dosierung in Verbindung ist, gespritzt .

            - Flexibler Arm mit Gegengewicht zum Aufhängen der Pistole .
            - Die Maschine stimmt mit den Vorschriften europäischer Richtlinien überein .


            BETRIEBSDATEN:
            Einfasig 220 VOLT - 50 HZ.
            Leistung 0,7 Kw
            Druckluft 6 ATM vertrocknet
            Luftverbrauch 1,5 NL / zyklus

            (technische Angaben laut Hersteller - ohe Gewähr!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Boring and dowel inserting machine GÖTZINGER PowerDrill m. Duebeleintreiben


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6349 · Boring and dowel inserting machine

          GÖTZINGER - PowerDrill m. Duebeleintreiben - - neu -

          Technical details
          Bore diameter variabel mm︱Number of heads horizontal 3 St.︱Number of heads vertical 4 St.︱
          Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 100 mm Z axis - 105 mm 1 drilling unit horizontal (dowel drilling unit left) Drilling motor 380 V, 1,100 W Clamping chuck d = 8/10 4,000 - 11,000 rpm can be adjusted 1 drilling unit vertically from above - fixed Drilling motor 1.1 KW, 3,000 rpm Quick change of the drill head 1 drill head BKF 2/3, quick-changeable, (corner bearing) On the loose part, hardware according to customer requirements including drill replacement Control: electro-pneumatic with three axes NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE compliant, with 1 set of drilling tools Dübo je 1xd = 6,8,10,14 + 2 Roughing cutter d = 16, 1 milling cutter d = 20, ready for connection 1 drill head BKF 3, fast exchangeable for olives including drill bit Fitting according to customer requirements 2 drilling units 1 x horizontal for drilling from above (for tapes) 1 x vertical for dowel work, right Drilling motor 1.100 Watt, infinitely variable 4,000 - 11,000 rpm with collet chuck ER 20 2 Milling units for lock boxes 1 x horizontal for tapes, lock boxes 1 x vertically from above for PZ, pushers, tapes Milling motor 2.2 KW Speed ??adjustable 3,000 - 16,000 rpm Clamping tool holder ER 25 1 length stop right and left, working length 2.8 m NC-controlled When the length stop is used, the fixed stops are removed. Dimension: LxBxH = 2.50 x 1.50 x 2.20 m - Weight machine 850 kg PowerDrill LxBxH = 0,30 x 0,30 x 6,00 m - Weight length stop 100 kg 1 Dübelleim- and press-in station consisting of: - Swing conveyor for dowels with feed -Dübeleinpressstation -High pressure glue pump made of stainless steel with glue container - Full jet valve for precise glue application Exhaust nozzle Price for 1 dowel diameter The basic machine will be about 300 mm longer (Technical data according to manufacturer - without guarantee!)
            Bore diameter variabel mm
            Number of heads horizontal 3 St.
            Number of heads vertical 4 St.
            Description :
            Götzinger Power Drill in special version with dübelleim and press-in station


            With the Götzinger PowerDrill, you can choose:

            - Drill the front and long sides
            - Doweling of doors, seatings, fighters
            - The drilling patterns are freely programmable
            - You can: Grip handle and corner bearing, with quick-change
            Multi-spindle drilling heads
            - You can: lock casings, pusher and PZ as well as 3D tapes and
            drill
            - The machine has a horizontal and a vertical milling unit
            - A simple control lets you create drilling and milling programs,
            Save and recall

            POWER DRILL - drilling and milling machine

            Universal drilling machine for drilling olives, corner bearings, dowel work
            On the front and the front, milling, lock boxes, tapes, etc.

            Base in stable design, covered with sheet metal
            Table top 1800 x 200 mm

            Processing unit:

            X-axis - 500 mm working travel
            Y-axis - 100 mm
            Z axis - 105 mm

            1 drilling unit horizontal (dowel drilling unit left)
            Drilling motor 380 V, 1,100 W
            Clamping chuck d = 8/10
            4,000 - 11,000 rpm can be adjusted


            1 drilling unit vertically from above - fixed
            Drilling motor 1.1 KW, 3,000 rpm
            Quick change of the drill head

            1 drill head BKF 2/3, quick-changeable, (corner bearing)
            On the loose part, hardware according to customer requirements including drill
            replacement

            Control: electro-pneumatic with three axes
            NC positioning controller and integrated machine function
            Input via TFT display, 10 "color

            Machine complete, CE compliant, with 1 set of drilling tools
            Dübo je 1xd = 6,8,10,14 + 2 Roughing cutter d = 16,
            1 milling cutter d = 20, ready for connection


            1 drill head BKF 3, fast exchangeable for olives including drill bit
            Fitting according to customer requirements

            2 drilling units
            1 x horizontal for drilling from above (for tapes)
            1 x vertical for dowel work, right
            Drilling motor 1.100 Watt, infinitely variable
            4,000 - 11,000 rpm with collet chuck ER 20

            2 Milling units for lock boxes
            1 x horizontal for tapes, lock boxes
            1 x vertically from above for PZ, pushers, tapes
            Milling motor 2.2 KW
            Speed ??adjustable 3,000 - 16,000 rpm
            Clamping tool holder ER 25

            1 length stop right and left, working length 2.8 m NC-controlled
            When the length stop is used, the fixed stops are removed.

            Dimension:
            LxBxH = 2.50 x 1.50 x 2.20 m - Weight machine 850 kg PowerDrill
            LxBxH = 0,30 x 0,30 x 6,00 m - Weight length stop 100 kg


            1 Dübelleim- and press-in station consisting of:

            - Swing conveyor for dowels with feed
            -Dübeleinpressstation
            -High pressure glue pump made of stainless steel with glue container
            - Full jet valve for precise glue application
            Exhaust nozzle


            Price for 1 dowel diameter
            The basic machine will be about 300 mm longer


            (Technical data according to manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Boring and dowel inserting machine GÖTZINGER PowerDrill Typ BF 315 -Video-


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6450 · Boring and dowel inserting machine

          GÖTZINGER - PowerDrill Typ BF 315 -Video- - - neu -

          Technical details
          Bore diameter variabel mm︱Number of heads horizontal 3 St.︱Number of heads vertical 4 St.︱weight 1500 kg︱Dimensions (L/W/H) 4800x1600x2400 mm︱Width mit Auflage 2300 mm︱
          Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm OPTION: Longitudinal stops right / left with NC axis high / low programmatically, thus dimension input by folding / light measure possible, Dimension: LxWxH = 4.80 x 1.60 x 2.40 m - weight machine 1,500 kg (technical data according to manufacturer - without guarantee!)
            Bore diameter variabel mm
            Number of heads horizontal 3 St.
            Number of heads vertical 4 St.
            weight 1500 kg
            Dimensions (L/W/H) 4800x1600x2400 mm
            Width mit Auflage 2300 mm
            Description :
            Götzinger Power Drill Type BF 297

            With the Götzinger PowerDrill you can, depending on the type and design:

            Griffoliven drill on the loose frame part or for finished wings,
            with multi-spindle drilling head, quick-change, also for milling
            of the lock case for WK 2 or intermediate gear

            Ecklager drill on loose frame part, with Mehrspindelbohrkopf,
            quick-change, corner-oriented over stop or custom made (tilt window)

            Drill vertically from above for fitting, pre-drill for clip on loose frame part

            Milling vertically from above for pushers, profile cylinders, 3-D hinges

            Horizontal drilling with 2 drilling units, different drilling diameters,
            Dowel drill front and long side, plywood / fighter, sprouts,
            Corner connection, front door etc.

            Milling horizontally for lock case / fitting etc.

            machine description

            Base frame in stable welded construction, linear guide for the X-axis

            Table top 3,000 x 200 mm

            6 clamping cylinder pneumatic with auto. Ausweichhub

            2 side stops for machining on the front side, manually swiveling in and out

            2 longitudinal stops can be manually swiveled in and out

            Travel:

            X-axis - 3,000 mm working length
            Y-axis - 120 mm
            Z-axis - 105 mm

            Aggregate:

            1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW
            Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20

            1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW
            Speed ??3,000 rpm, with drill head quick change device

            1 boring head BKF 3, olives, quick-change
            1 boring head BKF 3/2 corner bearing, quick-change

            1 milling unit (Agg.3) vertically from above, milling motor 2 KW,
            1,500 - 16,000 rpm, collet holder ER 25

            2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min,
            Collet holder ER 20

            1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min,
            Collet holder ER 20

            Electro-pneumatic control with 3-axis control X, Y, Z

            NC positioning controller make B + R input via TFT display 10 "

            Machine complete with 1 set of drilling tools
            dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16,
            CE compliant, ready for connection

            Suction connection: 1 x dm 120
            Power connection: 1 x 400 V, 16 amps
            Air connection: 1 x LW 9 mm

            OPTION:
            Longitudinal stops right / left with NC axis high / low programmatically,
            thus dimension input by folding / light measure possible,

            Dimension:
            LxWxH = 4.80 x 1.60 x 2.40 m - weight machine 1,500 kg

            (technical data according to manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Boring and dowel inserting machine GÖTZINGER Power Drill -300 Video -


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6529 · Boring and dowel inserting machine

          GÖTZINGER - Power Drill -300 Video - - - neu -

          Technical details
          Bore diameter variabel mm︱Number of heads horizontal 3 St.︱Number of heads vertical 4 St.︱Dimensions (L/W/H) 6100x1500x2300 mm︱Weight 950 kg︱
          1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) -------------------------- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case -------------------------- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) -------------------------- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical -------------------------- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head -------------------------- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change -------------------------- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change -------------------------- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case -------------------------- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ------------------------------ Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)
            Bore diameter variabel mm
            Number of heads horizontal 3 St.
            Number of heads vertical 4 St.
            Dimensions (L/W/H) 6100x1500x2300 mm
            Weight 950 kg
            Description :
            1 NEW drilling and milling center Götzinger Power Drill 300

            With the Götzinger PowerDrill you can, depending on the type and design:

            - Drill on the front and on the long side
            - Dowels of front doors, pegs, fighters
            - The drilling patterns are freely programmable
            - You can drill: handle slides and corner bearings, with quick-change
            multiple spindle
            - You can: Milling lock case, pusher and PZ as well as 3D belts and
            drill
            - The machine has a horizontal and a vertical milling unit
            - A simple control lets you create drilling and milling programs,
            save and call again

            Base frame in sturdy design, covered with sheet metal

            Table top 1800 x 200 mm

            Processing unit:

            X-axis - 500 mm working travel
            Y-axis - 0-120 mm
            Z-axis - 0-105 mm (above table)

            Horizontal aggregates:

            1 horizontal drilling unit (dowel drilling unit left)
            --------------------------
            Drilling motor 220 V, 1.1 kW
            Collet holder ER 25
            4,000 - 11,000 rpm adjustable

            1 milling unit horizontal for lock case
            --------------------------
            Milling motor 2.2 kW
            Speed ??controllable 3,000 - 16,000 rpm
            Collet holder ER 25

            1 horizontal drilling unit (dowel drilling unit right)
            --------------------------
            Drilling motor 1100 W, infinitely variable
            4,000 - 11,000 rpm, with collet holder ER 25


            Vertical aggregates:

            1 drilling unit vertical
            --------------------------
            Drilling motor 1100 W, infinitely variable
            4,000 - 11,000 rpm, with collet holder ER 25


            1 boring unit vertical - with quick-change boring head
            --------------------------
            Drilling motor 1,1 KW, 3,000 rpm

            Included:

            1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change
            --------------------------
            On loose item, drill assembly to customer fitting


            1 boring head BKF 3, for olive incl. Drill set, quick-change
            --------------------------
            On loose item, drill 1 cubo d = 25, 2 x dowel d = 10


            1 milling unit vertical for lock case
            --------------------------
            Milling motor 2.2 kW
            Speed ??controllable 3,000 - 16,000 rpm
            Collet holder ER 25

            1 piece length stop right and left, usable length 2.7 m, NC controlled

            Control: electro-pneumatic with three-axis
            NC positioning controller and integrated machine function
            Input via TFT display, 10 "color

            Machine complete, CE-compliant, with 1 set of drilling tools,
            DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection

            Loading dimensions:
            Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg
            Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg

            ------------------------------

            Total price in above mentioned version, ex works: on request

            Plus freight and installation / instruction


            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact

          Cross cut saw

          used Window production: wood Cross cut saw SALVAMAC Classic 50 mit Salvastop Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2691 · Cross cut saw

          SALVAMAC - Classic 50 mit Salvastop Video - - Vorfuehrmaschine -

          Technical details
          cutting width max. 310 mm︱Cutting height max. 125 mm︱Saw blade diameter 500 mm︱Motor output 5,5 kW︱Speed 2.800 U/min.︱Required air-pressure 6-8 bar︱Working height 900 +/- 20 mm︱Dimensions (L/W/H) 10645x1000x1300 mm︱
          SALVAMAC CLASSIC 50 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider -------------------------------------------------- - New machine from our demonstration room, Bj. 2022 Pos. 1: Classic 50 under table miter saw -------------------------------------------------- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ------------------------------- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop -------------------------------------------------- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_50 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ------------------------------- Total price demonstration machine from stock 73447 Oberkochen: on request! ------------------------------- More options like longer/shorter inlet/outlet, Stop systems on request! (technical data according to the manufacturer without guarantee!)
            cutting width max. 310 mm
            Cutting height max. 125 mm
            Saw blade diameter 500 mm
            Motor output 5,5 kW
            Speed 2.800 U/min.
            Required air-pressure 6-8 bar
            Working height 900 +/- 20 mm
            Dimensions (L/W/H) 10645x1000x1300 mm
            Description :
            SALVAMAC CLASSIC 50 – The semi-automatic miter saw
            with SALVASTOP 100 - electronic length stop/slider
            -------------------------------------------------- -
            New machine from our demonstration room, Bj. 2022

            Pos. 1: Classic 50 under table miter saw
            -------------------------------------------------- -
            Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.

            When cutting boards that are on top of each other, h max. 100 mm.
            The structure is made entirely of thick-walled and reinforced full-surface
            painted steel. Solid floor mounting system with flanged steel feet
            for the mounting hole.

            Bimanual safety cut control in ergonomic position.

            Motor power of the saw motor 5.5 kW.

            Adjustable cutting speed via a pneumatic controller.
            Maximum system for weight balancing and longevity. Shock absorbing system.

            Independent pneumatic adjustment options to adapt to different
            types of processing.

            Durable and easily replaceable saw blade adjustment bar.

            HM circular saw blade, diameter 500 mm, Z=108.

            Pneumatic upper workpiece clamping press with electro-pneumatic control.
            Presser movement system using new ball bearings with double dust protection
            and automatic lubrication system.

            CE compliant electrical system. The CE models must come standard with
            at least 1 meter long support plates at the inlet and outlet.

            Technical specifications:
            -------------------------------
            Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50
            Saw blade motor power: 5.5 kW
            Saw blade diameter: 500 mm
            Saw blade type: HM Z=108
            Saw blade rotation speed: 2800 rpm
            Air consumption per cycle: 7 Nl
            Intake manifold: 1 - 120 mm / 1 - 100 mm
            Air pressure: 6 - 8 bar
            Voltage: V 400/50Hz 3-phase
            Worktop height: 900 mm +- 20 mm
            Colour: Ral 7035 - Ral 1007

            Pos. 2: Salvastop 100 electronic length stop
            -------------------------------------------------- -

            - Working method: 2 modes
            1 x stop (length stop moves to the specified length) and
            1 x slide (several lengths are processed one after the other at the push of a
            button)
            - with servo drive
            - Ram speed: up to 60 m/min
            - slider length 600 mm
            - with a 7'' touch display
            - maximum weight of logs that can be pushed - up to 100 kg
            - USB connection

            COMBO_50 - 6400/7000
            - Roller conveyor with guide to the right of the saw.
            Painted steel frame with galvanized castors.
            Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m.

            - 6400/7000 SalvaStop 100 to the left of the saw.
            Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm.

            Demonstration machine additionally equipped with:

            UP & DOWN FRONT PROTECTION
            Movable instead of rigid front protection. The guard rises during cutting to
            ensure safe working conditions. Loading and unloading wood is simplified with
            the downward-facing guard. The system has another special, secured pneumatic
            system with linear guidance, which impresses with top quality and cutting-edge
            technology.

            SOFTWARE LINK FILES
            Preparation for data import via a Salvamac file template in CSV format.

            -------------------------------
            Total price demonstration machine from stock 73447 Oberkochen: on request!
            -------------------------------

            More options like longer/shorter inlet/outlet,
            Stop systems on request!

            (technical data according to the manufacturer without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Cross cut saw SALVAMAC Classic 50 Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2690 · Cross cut saw

          SALVAMAC - Classic 50 Video - - neu -

          Technical details
          cutting width max. 310 mm︱Cutting height max. 125 mm︱Saw blade diameter 500 mm︱Motor output 5,5 kW︱Speed 2.800 U/min.︱Required air-pressure 6-8 bar︱Working height 900 +/- 20 mm︱Dimensions (L/W/H) 4530x1000x1300 mm︱
          SALVAMAC CLASSIC 50 – The semi-automatic miter saw -------------------------------------------------- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ------------------------------- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Machine additionally equipped with: ------------------------------- 2 m infeed (to the right of the saw) with non-driven rollers: Painted steel frame with galvanized casters. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 350 mm. The space between the roles is encased in painted steel. Including lateral guidance. 2 m outlet (to the left of the saw) with non-driven rollers: Painted steel frame with galvanized casters. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 350 mm. The space between the rolls is from painted steel enclosed. Including lateral guide, stop guide and millimeter scale. 2 strong mechanical-pneumatic stops with a width of 200 mm ------------------------------- Total price ex works: on request! ------------------------------- Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)
            cutting width max. 310 mm
            Cutting height max. 125 mm
            Saw blade diameter 500 mm
            Motor output 5,5 kW
            Speed 2.800 U/min.
            Required air-pressure 6-8 bar
            Working height 900 +/- 20 mm
            Dimensions (L/W/H) 4530x1000x1300 mm
            Description :
            SALVAMAC CLASSIC 50 – The semi-automatic miter saw
            -------------------------------------------------- -

            Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.

            When cutting boards that are on top of each other, h max. 100 mm.
            The structure is made entirely of thick-walled and reinforced full-surface
            painted steel. Solid floor mounting system with flanged steel feet
            for the mounting hole.

            Bimanual safety cut control in ergonomic position.

            Motor power of the saw motor 5.5 kW.

            Adjustable cutting speed via a pneumatic controller.
            Maximum system for weight balancing and longevity. Shock absorbing system.

            Independent pneumatic adjustment options to adapt to different
            types of processing.

            Durable and easily replaceable saw blade adjustment bar.

            HM circular saw blade, diameter 500 mm, Z=108.

            Pneumatic upper workpiece clamping press with electro-pneumatic control.
            Presser movement system using new ball bearings with double dust protection
            and automatic lubrication system.

            CE compliant electrical system. The CE models must come standard with
            at least 1 meter long support plates at the inlet and outlet.

            Technical specifications:
            -------------------------------
            Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50
            Saw blade motor power: 5.5 kW
            Saw blade diameter: 500 mm
            Saw blade type: HM Z=108
            Saw blade rotation speed: 2800 rpm
            Air consumption per cycle: 7 Nl
            Intake manifold: 1 - 120 mm / 1 - 100 mm
            Air pressure: 6 - 8 bar
            Voltage: V 400/50Hz 3-phase
            Worktop height: 900 mm +- 20 mm
            Colour: Ral 7035 - Ral 1007

            Machine additionally equipped with:
            -------------------------------
            2 m infeed (to the right of the saw) with non-driven rollers:
            Painted steel frame with galvanized casters. load capacity 230 kg,
            Diameter 60 mm, distance 250 mm, width 350 mm. The space between the roles
            is encased in painted steel.
            Including lateral guidance.

            2 m outlet (to the left of the saw) with non-driven rollers:
            Painted steel frame with galvanized casters. Load capacity 230 kg, diameter
            60 mm, distance 250 mm, width 350 mm. The space between the rolls is from
            painted steel enclosed.
            Including lateral guide, stop guide and millimeter scale.

            2 strong mechanical-pneumatic stops with a width of 200 mm

            -------------------------------
            Total price ex works: on request!
            -------------------------------

            Further options such as longer inlet/outlet, stop systems on request!

            (technical data according to the manufacturer without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          SALVAMAC -