,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Cross cut saw

          Machinelist: Cross cut saw


          Transport system

          used Window production: wood Transport system NN N150/RTF


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-M822 · Transport system

          NN - N150/RTF - - 1997 -

          Technical details
          working length - mm︱Working width - mm︱Working height - mm︱
          Motor: 3,23 kW Throw-in opening 1,200 x 500 mm Transport height: 2,000 mm incl. cooling pump Chip conveyor
            working length - mm
            Working width - mm
            Working height - mm
            Description :
            Motor: 3,23 kW
            Throw-in opening 1,200 x 500 mm
            Transport height: 2,000 mm
            incl. cooling pump
            Chip conveyor



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Cross cut saw

          used Window production: wood Cross cut saw SALVAMAC Classic 50 mit Salvastop Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2691 · Cross cut saw

          SALVAMAC - Classic 50 mit Salvastop Video - - Vorfuehrmaschine -

          Technical details
          cutting width max. 310 mm︱Cutting height max. 125 mm︱Saw blade diameter 500 mm︱Motor output 5,5 kW︱Speed 2.800 U/min.︱Required air-pressure 6-8 bar︱Working height 900 +/- 20 mm︱Dimensions (L/W/H) 10645x1000x1300 mm︱
          SALVAMAC CLASSIC 50 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider -------------------------------------------------- - New machine from our demonstration room, Bj. 2022 Pos. 1: Classic 50 under table miter saw -------------------------------------------------- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ------------------------------- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop -------------------------------------------------- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_50 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ------------------------------- Total price demonstration machine from stock 73447 Oberkochen: on request! ------------------------------- More options like longer/shorter inlet/outlet, Stop systems on request! (technical data according to the manufacturer without guarantee!)
            cutting width max. 310 mm
            Cutting height max. 125 mm
            Saw blade diameter 500 mm
            Motor output 5,5 kW
            Speed 2.800 U/min.
            Required air-pressure 6-8 bar
            Working height 900 +/- 20 mm
            Dimensions (L/W/H) 10645x1000x1300 mm
            Description :
            SALVAMAC CLASSIC 50 – The semi-automatic miter saw
            with SALVASTOP 100 - electronic length stop/slider
            -------------------------------------------------- -
            New machine from our demonstration room, Bj. 2022

            Pos. 1: Classic 50 under table miter saw
            -------------------------------------------------- -
            Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.

            When cutting boards that are on top of each other, h max. 100 mm.
            The structure is made entirely of thick-walled and reinforced full-surface
            painted steel. Solid floor mounting system with flanged steel feet
            for the mounting hole.

            Bimanual safety cut control in ergonomic position.

            Motor power of the saw motor 5.5 kW.

            Adjustable cutting speed via a pneumatic controller.
            Maximum system for weight balancing and longevity. Shock absorbing system.

            Independent pneumatic adjustment options to adapt to different
            types of processing.

            Durable and easily replaceable saw blade adjustment bar.

            HM circular saw blade, diameter 500 mm, Z=108.

            Pneumatic upper workpiece clamping press with electro-pneumatic control.
            Presser movement system using new ball bearings with double dust protection
            and automatic lubrication system.

            CE compliant electrical system. The CE models must come standard with
            at least 1 meter long support plates at the inlet and outlet.

            Technical specifications:
            -------------------------------
            Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50
            Saw blade motor power: 5.5 kW
            Saw blade diameter: 500 mm
            Saw blade type: HM Z=108
            Saw blade rotation speed: 2800 rpm
            Air consumption per cycle: 7 Nl
            Intake manifold: 1 - 120 mm / 1 - 100 mm
            Air pressure: 6 - 8 bar
            Voltage: V 400/50Hz 3-phase
            Worktop height: 900 mm +- 20 mm
            Colour: Ral 7035 - Ral 1007

            Pos. 2: Salvastop 100 electronic length stop
            -------------------------------------------------- -

            - Working method: 2 modes
            1 x stop (length stop moves to the specified length) and
            1 x slide (several lengths are processed one after the other at the push of a
            button)
            - with servo drive
            - Ram speed: up to 60 m/min
            - slider length 600 mm
            - with a 7'' touch display
            - maximum weight of logs that can be pushed - up to 100 kg
            - USB connection

            COMBO_50 - 6400/7000
            - Roller conveyor with guide to the right of the saw.
            Painted steel frame with galvanized castors.
            Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m.

            - 6400/7000 SalvaStop 100 to the left of the saw.
            Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm.

            Demonstration machine additionally equipped with:

            UP & DOWN FRONT PROTECTION
            Movable instead of rigid front protection. The guard rises during cutting to
            ensure safe working conditions. Loading and unloading wood is simplified with
            the downward-facing guard. The system has another special, secured pneumatic
            system with linear guidance, which impresses with top quality and cutting-edge
            technology.

            SOFTWARE LINK FILES
            Preparation for data import via a Salvamac file template in CSV format.

            -------------------------------
            Total price demonstration machine from stock 73447 Oberkochen: on request!
            -------------------------------

            More options like longer/shorter inlet/outlet,
            Stop systems on request!

            (technical data according to the manufacturer without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Cross cut saw SALVAMAC Classic 50 Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2690 · Cross cut saw

          SALVAMAC - Classic 50 Video - - neu -

          Technical details
          cutting width max. 310 mm︱Cutting height max. 125 mm︱Saw blade diameter 500 mm︱Motor output 5,5 kW︱Speed 2.800 U/min.︱Required air-pressure 6-8 bar︱Working height 900 +/- 20 mm︱Dimensions (L/W/H) 4530x1000x1300 mm︱
          SALVAMAC CLASSIC 50 – The semi-automatic miter saw -------------------------------------------------- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ------------------------------- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Machine additionally equipped with: ------------------------------- 2 m infeed (to the right of the saw) with non-driven rollers: Painted steel frame with galvanized casters. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 350 mm. The space between the roles is encased in painted steel. Including lateral guidance. 2 m outlet (to the left of the saw) with non-driven rollers: Painted steel frame with galvanized casters. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 350 mm. The space between the rolls is from painted steel enclosed. Including lateral guide, stop guide and millimeter scale. 2 strong mechanical-pneumatic stops with a width of 200 mm ------------------------------- Total price ex works: on request! ------------------------------- Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)
            cutting width max. 310 mm
            Cutting height max. 125 mm
            Saw blade diameter 500 mm
            Motor output 5,5 kW
            Speed 2.800 U/min.
            Required air-pressure 6-8 bar
            Working height 900 +/- 20 mm
            Dimensions (L/W/H) 4530x1000x1300 mm
            Description :
            SALVAMAC CLASSIC 50 – The semi-automatic miter saw
            -------------------------------------------------- -

            Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.

            When cutting boards that are on top of each other, h max. 100 mm.
            The structure is made entirely of thick-walled and reinforced full-surface
            painted steel. Solid floor mounting system with flanged steel feet
            for the mounting hole.

            Bimanual safety cut control in ergonomic position.

            Motor power of the saw motor 5.5 kW.

            Adjustable cutting speed via a pneumatic controller.
            Maximum system for weight balancing and longevity. Shock absorbing system.

            Independent pneumatic adjustment options to adapt to different
            types of processing.

            Durable and easily replaceable saw blade adjustment bar.

            HM circular saw blade, diameter 500 mm, Z=108.

            Pneumatic upper workpiece clamping press with electro-pneumatic control.
            Presser movement system using new ball bearings with double dust protection
            and automatic lubrication system.

            CE compliant electrical system. The CE models must come standard with
            at least 1 meter long support plates at the inlet and outlet.

            Technical specifications:
            -------------------------------
            Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50
            Saw blade motor power: 5.5 kW
            Saw blade diameter: 500 mm
            Saw blade type: HM Z=108
            Saw blade rotation speed: 2800 rpm
            Air consumption per cycle: 7 Nl
            Intake manifold: 1 - 120 mm / 1 - 100 mm
            Air pressure: 6 - 8 bar
            Voltage: V 400/50Hz 3-phase
            Worktop height: 900 mm +- 20 mm
            Colour: Ral 7035 - Ral 1007

            Machine additionally equipped with:
            -------------------------------
            2 m infeed (to the right of the saw) with non-driven rollers:
            Painted steel frame with galvanized casters. load capacity 230 kg,
            Diameter 60 mm, distance 250 mm, width 350 mm. The space between the roles
            is encased in painted steel.
            Including lateral guidance.

            2 m outlet (to the left of the saw) with non-driven rollers:
            Painted steel frame with galvanized casters. Load capacity 230 kg, diameter
            60 mm, distance 250 mm, width 350 mm. The space between the rolls is from
            painted steel enclosed.
            Including lateral guide, stop guide and millimeter scale.

            2 strong mechanical-pneumatic stops with a width of 200 mm

            -------------------------------
            Total price ex works: on request!
            -------------------------------

            Further options such as longer inlet/outlet, stop systems on request!

            (technical data according to the manufacturer without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact

          Transport system

          used Window production: wood Transport system HABERKORN Beladefoerderer - Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5943 · Transport system

          HABERKORN - Beladefoerderer - Video - - neu -

          Technical details
          working length , mm︱Working width , mm︱Working height , mm︱
            working length , mm
            Working width , mm
            Working height , mm


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Transport system HABERKORN Rueckfoerderer mit GLS Abwurf


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5779 · Transport system

          HABERKORN - Rueckfoerderer mit GLS Abwurf - - neu -

          Technical details
          working length 3120 mm︱Working width 2451 mm︱Working height 750 - 1000 mm︱
            working length 3120 mm
            Working width 2451 mm
            Working height 750 - 1000 mm


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Transport system HABERKORN Foerderanlage nach Fluttunnel


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5745 · Transport system

          HABERKORN - Foerderanlage nach Fluttunnel - - neu -

          Technical details
          working length 4200 mm︱Working width 2500 mm︱Working height 850 - 1000 mm︱
            working length 4200 mm
            Working width 2500 mm
            Working height 850 - 1000 mm


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Transport system FRAMATECH Leichtschwenkkran mit Lift


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6109 · Transport system

          FRAMATECH - Leichtschwenkkran mit Lift - - neu -

          Technical details
          working length 6000 mm︱Working width , mm︱Working height , mm︱
            working length 6000 mm
            Working width , mm
            Working height , mm


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Transport system HABERKORN Ruecklauf fuer Umfaelzmaschine


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6049 · Transport system

          HABERKORN - Ruecklauf fuer Umfaelzmaschine - - neu -

          Technical details
          working length 3100 mm︱Working width ca. 3400 mm︱Working height 750 - 1000 mm︱
          Haberkorn return means for Umfälzautomat ************************************************** ********* For frame from 300 mm to 3000 mm for automatic Return consisting of: First cross roller conveyor approx 3100 mm long ------------------------------------------------- built-in conveyor belts for depositing the wing on the cross roller conveyor with about 10 mm stroke Driving speed of about 5-30 m / min. Roller diameter 80 mm Rollers with PVC coating Gear motor with 0.37 KW 2 Synchronized lifting device for cross roller conveyor -------------------------------------------------- ------------------------ built-in rollers with stepless drive about 5-30 m / min. max. 100 mm stroke Roller diameter 80 mm Rollers with PVC coating Synchronous storage of GG 25 hardened gears and rods 2 pneumatic cylinder 80 x 100 mm adjustable stops (top - down ) Synchronization via shafts and bevel gears 3 longitudinal conveyor for transport back ---------------------------------------------- Conveyor belts with polyester coated tread 50 mm wide, made in plastic guides Drive with spur gear motor 0.37 KW , about 5-30 m / min. Wing with more than 3000 mm can use the Be bypassed operator. control -------------- Siemens S 7, 24 VDC optical limit switches E-stop loop Fully installed with 16 A Euro plug 400 V AC, 2.5 KW, 50 Hz Color: --------- RAL 7035 light gray Construction , commissioning and instruction EUR 980,00 (technical details according to manufacturer - without guarantee ! )
            working length 3100 mm
            Working width ca. 3400 mm
            Working height 750 - 1000 mm
            Description :
            Haberkorn return means for Umfälzautomat
            ************************************************** *********
            For frame from 300 mm to 3000 mm for automatic
            Return consisting of:

            First cross roller conveyor approx 3100 mm long
            -------------------------------------------------
            built-in conveyor belts for depositing
            the wing on the cross roller conveyor with
            about 10 mm stroke
            Driving speed of about 5-30 m / min.
            Roller diameter 80 mm
            Rollers with PVC coating
            Gear motor with 0.37 KW

            2 Synchronized lifting device for cross roller conveyor
            -------------------------------------------------- ------------------------
            built-in rollers with stepless drive about 5-30 m / min.
            max. 100 mm stroke
            Roller diameter 80 mm
            Rollers with PVC coating
            Synchronous storage of GG 25
            hardened gears and rods
            2 pneumatic cylinder 80 x 100 mm
            adjustable stops (top - down )
            Synchronization via shafts and bevel gears

            3 longitudinal conveyor for transport back
            ----------------------------------------------
            Conveyor belts with polyester coated tread
            50 mm wide, made in plastic guides
            Drive with spur gear motor 0.37 KW , about 5-30 m / min.

            Wing with more than 3000 mm can use the
            Be bypassed operator.

            control
            --------------
            Siemens S 7, 24 VDC
            optical limit switches
            E-stop loop
            Fully installed with 16 A Euro plug
            400 V AC, 2.5 KW, 50 Hz


            Color:
            ---------
            RAL 7035 light gray

            Construction , commissioning and instruction EUR 980,00

            (technical details according to manufacturer - without guarantee ! )


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Transport system HABERKORN Ruecktransport_back transport


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5375 · Transport system

          HABERKORN - Ruecktransport_back transport - - neu -

          Technical details
          working length 2451 mm︱Working width 1670 mm︱Working height 800-1000 mm︱
          Neue Haberkorn Rückfördereinrichtung nach Vierseitenhobelmaschine ------------------------------------------------------- Förderanlage für Holzlängen von 300 mm-4200 mm Pos.1 Längs-Quer-Länsförderer ca.2451 x 1670 mm - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm) - stufenlos angetriebene Rollenbahn ca.5-25m/min, - Rollendurchm.50mm, 140mm Rollenmantellänge - Übergabe auf Querförderer durch Heben-Senken der Rollenbahn - Querförderer mit 6 Stck. Traversen - Förderbänder 50mm breit, in Kunststoffbahnen geführt - Antrieb ca.5-25m/min, 0,37 KW - ca.1250mm von Anschlag zu Anschlag - Übergabe als Hebesenkeinrichtung - angetriebene PVC beschichtete Stahlrollen, Durchm.50mm, 140mm Mantellänge - Antrieb ca.5-25m/min, 0,37 KW - Rollenabdeckung nach HBG Pos.2 Förderband ca.3000 x 260mm - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm) - angetriebenes Band ca. 5-25 m/min - Bandbreite 260 mm - Antrieb über Getriebemotor - Förderband auf Lenkrollen mit Bremse - Rollenabdeckung nach HBG Steuerung: Siemens LOGO 24 RCo, 24 V DC, optische Endschalter, Not-Aus-Schleife Fertig installiert mit 16A Eurostecker Anschluß: 400 V AC, 2,0 KW, 50 Hz Pneumatik: 6-8 bar, Verbrauch ca.12NL/min Farbe : RAL 7035 hellgrau CE nach EN 292 Teil1, EN 292 Teil 2, EN 294, EN 349, EN 418, EN 602-1EG Maschinenrichtlinie 89/392/EWG , EG Niederspannungsrichtlinie 73/23 /EWG Genannte Preise ab Werk zzgl. Verpackungs- und Transportkosten (Techn. Angaben laut Hersteller ohne Gewähr!)
            working length 2451 mm
            Working width 1670 mm
            Working height 800-1000 mm
            Description :
            Neue Haberkorn Rückfördereinrichtung nach Vierseitenhobelmaschine
            -------------------------------------------------------

            Förderanlage für Holzlängen von 300 mm-4200 mm

            Pos.1 Längs-Quer-Länsförderer ca.2451 x 1670 mm

            - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm)
            - stufenlos angetriebene Rollenbahn ca.5-25m/min,
            - Rollendurchm.50mm, 140mm Rollenmantellänge
            - Übergabe auf Querförderer durch Heben-Senken der Rollenbahn
            - Querförderer mit 6 Stck. Traversen
            - Förderbänder 50mm breit, in Kunststoffbahnen geführt
            - Antrieb ca.5-25m/min, 0,37 KW
            - ca.1250mm von Anschlag zu Anschlag
            - Übergabe als Hebesenkeinrichtung
            - angetriebene PVC beschichtete Stahlrollen, Durchm.50mm, 140mm Mantellänge
            - Antrieb ca.5-25m/min, 0,37 KW
            - Rollenabdeckung nach HBG

            Pos.2 Förderband ca.3000 x 260mm

            - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm)
            - angetriebenes Band ca. 5-25 m/min
            - Bandbreite 260 mm
            - Antrieb über Getriebemotor
            - Förderband auf Lenkrollen mit Bremse
            - Rollenabdeckung nach HBG

            Steuerung: Siemens LOGO 24 RCo, 24 V DC, optische Endschalter, Not-Aus-Schleife Fertig installiert mit 16A Eurostecker

            Anschluß: 400 V AC, 2,0 KW, 50 Hz

            Pneumatik: 6-8 bar, Verbrauch ca.12NL/min

            Farbe : RAL 7035 hellgrau

            CE nach EN 292 Teil1, EN 292 Teil 2, EN 294, EN 349, EN 418, EN 602-1EG Maschinenrichtlinie 89/392/EWG , EG Niederspannungsrichtlinie 73/23 /EWG

            Genannte Preise ab Werk zzgl. Verpackungs- und Transportkosten

            (Techn. Angaben laut Hersteller ohne Gewähr!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Transport system HABERKORN RFA


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-662 · Transport system

          HABERKORN - RFA - - neu -

          Technical details
          working length 2500 mm︱Working width 1650 mm︱Working height 850 - 1000 mm︱
            working length 2500 mm
            Working width 1650 mm
            Working height 850 - 1000 mm


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Transport system HABERKORN Ruecktransport


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6770 · Transport system

          HABERKORN - Ruecktransport - - Neu -

          Technical details
          working length 2451 mm︱Working width 2170 mm︱Working height 800-1000 mm︱
          Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ---------------------------------------------- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ---------------------------------------------- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ---------------------------------------------- Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ---------------------------------------------- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ---------------------------------------------- Price of the above version ex works: on request! plus packaging and transport costs ---------------------------------------------- (Technical information according to the manufacturer without guarantee!)
            working length 2451 mm
            Working width 2170 mm
            Working height 800-1000 mm
            Description :
            Haberkorn return conveyor approx. 2,451 mm x 2,170 mm
            ----------------------------------------------
            base frame
            - Steel tube frame 50 x 50 x 2 mm
            - Height-adjustable trestles (approx. 800mm - 1000mm)
            - Conveyor system for wood lengths from 300mm to 4200mm
            - Conveyor system for wood widths up to 240mm

            Roller conveyor - infeed
            - Continuously driven roller conveyor approx. 5 - 25m/min
            - Drive via gear motor 0.37kW, vertical shaft and PU round belt
            - Roll diameter 50mm, 240mm roll jacket length with PVC jacket
            - Transfer to cross conveyor by lifting - lowering the roller conveyor
            - Roller cover according to HBG

            cross conveyor
            - Cross conveyor with 6 traverses
            - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks
            - Continuously driven cross conveyor approx. 5 - 20m/min
            - Drive via geared motor 0.37kW
            - Approximately 1750mm lock to lock

            Roller conveyor - outlet
            - Continuously driven roller conveyor approx. 5 - 25m/min
            - Drive via gear motor 0.37kW, vertical shaft and PU round belt
            - Roll diameter 50mm, 240mm roll jacket length with PVC jacket
            - Transfer to cross conveyor by lifting - lowering the roller conveyor
            - Roller cover according to HBG
            ----------------------------------------------
            Conveyor belt approx. 320mm x 3500mm

            base frame
            - Steel tube frame 50 x 50 x 2 mm
            - Height-adjustable trestles (approx. 800mm - 1000mm)
            - Conveyor belt for wood lengths from 300mm to 4200mm
            - Conveyor belt for timber widths up to 240mm
            - Conveyor belt on castors with brake

            tape
            - Continuously driven approx. 5 - 25m/min
            - Drive via geared motor 0.37kW
            - Tape PVC coated 260mm wide
            - Stop on both sides approx. 15mm
            ----------------------------------------------
            Steering:

            - Ready to plug in with its own controller and logic
            - Siemens PLC, 24VDC
            - Siemens frequency converter
            - Optical limit switches and emergency stop loop
            - Ready installed with 16A Euro plug
            - Connection: 400V AC, 2kW, 50Hz
            ----------------------------------------------
            Pneumatic: 6-8 bar, consumption approx. 16NL/min

            Colour: RAL 7035 light grey

            Basic EC Directive 2006/42/EC in accordance with
            2006/95/EG Electrical Equipment (Low Voltage Directive) and
            2004/108/EC EMC Directive
            ----------------------------------------------
            Price of the above version ex works: on request!
            plus packaging and transport costs
            ----------------------------------------------
            (Technical information according to the manufacturer without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Transport system WEINIG DEF 25


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2361 · Transport system

          WEINIG - DEF 25 - - gebraucht -

          Technical details
          working length 2000 mm︱Working width 250 mm︱Working height 970 mm︱
          Weinig pressure conveying system DEF 25 to the operator in working height for Unicontrol Length 2000 mm Depth 1800 mm Brand width 250 mm Rear roller conveyor not driven 2500 mm Roll width 250 mm (technical details according to manufacturer - without guarantee.)
            working length 2000 mm
            Working width 250 mm
            Working height 970 mm
            Description :
            Weinig pressure conveying system DEF 25 to the operator in working
            height for Unicontrol

            Length 2000 mm
            Depth 1800 mm
            Brand width 250 mm
            Rear roller conveyor not driven 2500 mm
            Roll width 250 mm

            (technical details according to manufacturer - without guarantee.)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          SALVAMAC -