Bar Stock Carrier

diameter 5 - max. 51 mm︱Guide channels max. 6 ︱Spindle height ca. 1020 mm︱bar material dia. min. 5 mm︱bar material dia. max. 51 mm︱max. bar length 6200 mm︱Remaining piece design 600 mm︱accumulator pressure min 6 bar︱coolant capacity 1500 l/min︱control SPS ︱total power requirement 2,3 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 7,2 x 1,55 x 1,6 m︱

---

used multi-channel bar feeder ecoPROFImat 42.6 RK3 / 6000 III Condition: As NEW, approx. 500 operating hours incl: Guide channels Ø 20/24/44 Material slide Ø 19/22/42 spindle insert tubes Ø 20/24/44 Interface to the machine set up for Mazak QT 200 MS x 500 Area of application: Ideal for small to medium batch sizes Features: Minimal changeover times, channel change at the touch of a button Optimum running properties 3 to 6 guide channels, high dead weight Maximum running smoothness, hydrodynamic bearing, 360° closed guide channels High level of operating convenience thanks to an 18 cm (7") widescreen touch display. Reliable feeding of rotationally symmetrical profile material Electronic synchronisation device, optimum material guidance between magazine and machine with hydrodynamic telescopic system. Simple changeover from long to short turning operation at the touch of a button Special features: Simple change of the spindle insert tubes through axial displacement of the magazine. Process-integrated remnant removal to the rear (remnant length 600 mm) Machine-friendly, vibration-absorbing design

Bar diameter 6 - 65 mm︱Bar Length 300 - 1250 mm︱Length 1600 mm︱Depth 1048 mm︱Height 1010 / 1410 mm︱Weight 375 kg︱

---

diameter 35 - max. 65 mm︱Guide channels 6 ︱control SPS ︱max. bar length 3.200 mm︱bar material dia. min. 35 mm︱bar material dia. max. 65 mm︱total power requirement 2 kW︱weight of the machine ca. 2,0 t︱dimensions of the machine ca. 4,0 x 1,1 x 1,6 m︱

---

Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC

diameter 15 mm︱length 800 mm︱

---

= bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm

diameter 3 - 16 mm︱length 3000 mm︱

---

= bar loading magazin for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø

diameter 26 mm︱length 3200 mm︱Control ︱total power requirement 1 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 4,5 x 0,8 x 1,35 m︱

---

Bar feeder FMB Turbo 3-26 1 channel and bar pusher for 26mm Bar length max. 3200 mm Was attached to Gildemeister Ergomat TDA 26

bar material dia. 12 - 42 mm︱bar length 3200 mm︱feed speeds 220 mm/sec︱return speed 440 mm/sec︱feed power bis 400 Nm︱compressed air max. 6 bar︱filling capacity 22 Stangen x ø 12 mm︱filling capacity 13 Stangen x ø 20 mm︱filling capacity 7 Stangen x ø 42 mm︱hexagon material bis SW 27 mm︱square material bis SW 20 mm︱total power requirement 0,75 kW︱weight of the machine ca. 0,83 t︱dimensions of machine L x W x H 5,06 x 0,85 x 1,275 m︱

---

= bar loading magazine, compressed air controlled

diameter 42 mm︱length 1500 mm︱voltage 380 V / 50 Hz︱total power requirement 1,1 kW︱weight of the machine ca. 0.4 t︱dimensions of the machine ca. m︱

---

Rod guidance pipe, diameter 42 x 2400 mm length, 2 columns, 1 hydraulic aggregate,

diameter 45 mm︱length 4400 mm︱total power requirement 1,0 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 5 x 0,4 x 1,2 m︱

---

diameter 250 - 500 mm︱

---

diameter 500 mm︱internal diameter 90 mm︱width 110 mm︱weight 160 kg︱

---

diameter 500 mm︱internal diameter 90 mm︱width 110 mm︱weight 160 kg︱

---

diameter 250 mm︱internal diameter 80 mm︱height 145 mm︱

---

diameter 700 mm︱internal diameter 80 mm︱height 125 mm︱weight 350 kg︱

---

diameter 210 mm︱internal diameter 60 mm︱width - thread roll/thread segment 85 mm︱

---

diameter 340 mm︱hollow 80 mm︱chuck width 90 mm︱weight ca.80 kg︱

---

Make: Diameter: Ø340mm Passage: approx. 80mm Chuck width: 90mm Weight: 80kg

diameter 250 mm︱hollow 85 mm︱chuck width 100 mm︱weight / kg︱

---

Diameter: Ø250 mm Chuck width: 100mm Passage: 85 mm

diameter 125 mm︱boring diameter 35 mm︱- / ︱

---

diameter 250 mm︱boring diameter 100 mm︱- / ︱

---

Type: 4KT 250 Diameter: 250mm Bore diameter: 100mm n-Max: 2500 / min f-max: 6000 / dan

diameter 250 mm︱hollow 75 mm︱chuck width 110 mm︱weight ca.50 kg︱

---

Diameter: Ø250mm Passage: approx. 75mm Chuck width: 100mm Weight: 50kg

diameter 400 mm︱hollow 100 mm︱chuck width 180 mm︱weight ca.50 kg︱

---

Diameter: Ø250mm Passage: approx. 100mm Chuck width: 180mm Weight: 50kg

diameter 270 mm︱hollow 80 mm︱chuck width 100 mm︱weight ca.80 kg︱

---

Diameter: Ø270mm Passage: approx. 80mm Chuck width: 100mm Weight: 80kg

diameter 250 mm︱boring diameter 80 mm︱- / ︱

---

Diameter: Ø 250 mm Chuck width: 78mm Passage: 80mm Weight: 30kg

diameter 315 mm︱hollow 90 mm︱chuck width 115 mm︱weight / kg︱

---

Three-jaw chuck from Forkardt F315 1 jaw is missing! Type: F315 Diameter: Ø315mm Passage: approx. 90mm Lining width approx.: 115mm