,
Réseau européen de revendeurs de machines de stockage

Bitte einen Suchbegriff eingeben - Veuillez entrer un terme de recherche
Catégorie:
    Fabricant:
      Machines:
        Commerçant:

          Bar Stock Carrier

          Machinelist: Bar Stock Carrier


          Bar Stock Carrier

          used Other accessories for machine tools Bar Stock Carrier BREUNING IRCO ecoProfi 42.6 RK3 - 6000 III


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09212F · Bar Stock Carrier

          BREUNING IRCO - ecoProfi 42.6 RK3 - 6000 III - - 2020 - SPS

          Technical details
          diameter 5 - max. 51 mm︱Guide channels max. 6 ︱Spindle height ca. 1020 mm︱bar material dia. min. 5 mm︱bar material dia. max. 51 mm︱max. bar length 6200 mm︱Remaining piece design 600 mm︱accumulator pressure min 6 bar︱coolant capacity 1500 l/min︱control SPS ︱total power requirement 2,3 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 7,2 x 1,55 x 1,6 m︱
          used multi-channel bar feeder ecoPROFImat 42.6 RK3 / 6000 III Condition: As NEW, approx. 500 operating hours incl: Guide channels Ø 20/24/44 Material slide Ø 19/22/42 spindle insert tubes Ø 20/24/44 Interface to the machine set up for Mazak QT 200 MS x 500 Area of application: Ideal for small to medium batch sizes Features: Minimal changeover times, channel change at the touch of a button Optimum running properties 3 to 6 guide channels, high dead weight Maximum running smoothness, hydrodynamic bearing, 360° closed guide channels High level of operating convenience thanks to an 18 cm (7") widescreen touch display. Reliable feeding of rotationally symmetrical profile material Electronic synchronisation device, optimum material guidance between magazine and machine with hydrodynamic telescopic system. Simple changeover from long to short turning operation at the touch of a button Special features: Simple change of the spindle insert tubes through axial displacement of the magazine. Process-integrated remnant removal to the rear (remnant length 600 mm) Machine-friendly, vibration-absorbing design
            diameter 5 - max. 51 mm
            Guide channels max. 6
            Spindle height ca. 1020 mm
            bar material dia. min. 5 mm
            bar material dia. max. 51 mm
            max. bar length 6200 mm
            Remaining piece design 600 mm
            accumulator pressure min 6 bar
            coolant capacity 1500 l/min
            control SPS
            total power requirement 2,3 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 7,2 x 1,55 x 1,6 m
            Description :
            used multi-channel bar feeder ecoPROFImat 42.6 RK3 / 6000 III
            Condition: As NEW, approx. 500 operating hours
            incl:
            Guide channels Ø 20/24/44 Material slide Ø 19/22/42
            spindle insert tubes Ø 20/24/44
            Interface to the machine set up for Mazak QT 200 MS x 500

            Area of application: Ideal for small to medium batch sizes
            Features:
            Minimal changeover times, channel change at the touch of a button
            Optimum running properties 3 to 6 guide channels, high dead weight
            Maximum running smoothness, hydrodynamic bearing, 360° closed guide channels
            High level of operating convenience thanks to an 18 cm (7") widescreen touch
            display. Reliable feeding of rotationally symmetrical profile material
            Electronic synchronisation device, optimum material guidance between magazine
            and machine with hydrodynamic telescopic system.
            Simple changeover from long to short turning operation at the touch of a button
            Special features:
            Simple change of the spindle insert tubes through axial displacement of the
            magazine. Process-integrated remnant removal to the rear (remnant length 600 mm)
            Machine-friendly, vibration-absorbing design


        • Mager & Wedemeyer
        • Europaallee 24a
        • 28309 Bremen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier LNS Eco Load


          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande

          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-2777 · Bar Stock Carrier

          LNS - Eco Load - - 2004 -

          Technical details
          Bar diameter 6 - 65 mm︱Bar Length 300 - 1250 mm︱Length 1600 mm︱Depth 1048 mm︱Height 1010 / 1410 mm︱Weight 375 kg︱
            Bar diameter 6 - 65 mm
            Bar Length 300 - 1250 mm
            Length 1600 mm
            Depth 1048 mm
            Height 1010 / 1410 mm
            Weight 375 kg
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier BREUNING IRCO Profimat 65.6 196.6


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8361 · Bar Stock Carrier

          BREUNING IRCO - Profimat 65.6 196.6 - - 2001 - SPS

          Technical details
          diameter 35 - max. 65 mm︱Guide channels 6 ︱control SPS ︱max. bar length 3.200 mm︱bar material dia. min. 35 mm︱bar material dia. max. 65 mm︱total power requirement 2 kW︱weight of the machine ca. 2,0 t︱dimensions of the machine ca. 4,0 x 1,1 x 1,6 m︱
          Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC
            diameter 35 - max. 65 mm
            Guide channels 6
            control SPS
            max. bar length 3.200 mm
            bar material dia. min. 35 mm
            bar material dia. max. 65 mm
            total power requirement 2 kW
            weight of the machine ca. 2,0 t
            dimensions of the machine ca. 4,0 x 1,1 x 1,6 m
            Description :
            Multi-Channel-Bar-Feeding-System
            BREUNING IRCO - 65.6 196.6

            - has been installed at a Mori Seiki ZL 200 SMC


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier IRCO ILS-RBE 7208


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03051 · Bar Stock Carrier

          IRCO - ILS-RBE 7208 - - 1999 -

          Technical details
          diameter 15 mm︱length 800 mm︱
          = bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm
            diameter 15 mm
            length 800 mm
            Description :
            = bar loading and de-loading magazine

            for bars up to 15 mmø, bar length 800 mm


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier SYMCO KH-16


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03050 · Bar Stock Carrier

          SYMCO - KH-16 - - 1999 -

          Technical details
          diameter 3 - 16 mm︱length 3000 mm︱
          = bar loading magazin for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø
            diameter 3 - 16 mm
            length 3000 mm
            Description :
            = bar loading magazin

            for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø



        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier FMB Turbo 3-26


          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02960 · Bar Stock Carrier

          FMB - Turbo 3-26 - - 1998 -

          Technical details
          diameter 26 mm︱length 3200 mm︱Control ︱total power requirement 1 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 4,5 x 0,8 x 1,35 m︱
          Bar feeder FMB Turbo 3-26 1 channel and bar pusher for 26mm Bar length max. 3200 mm Was attached to Gildemeister Ergomat TDA 26
            diameter 26 mm
            length 3200 mm
            total power requirement 1 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 4,5 x 0,8 x 1,35 m
            Description :
            Bar feeder FMB Turbo 3-26

            1 channel and bar pusher for 26mm
            Bar length max. 3200 mm
            Was attached to Gildemeister Ergomat TDA 26



        • Detlef Jahn e. K.
        • Gewerbepark 8
        • 75331 Engelsbrand
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier TRAUB DNH 42/3000


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03060 · Bar Stock Carrier

          TRAUB - DNH 42/3000 - - 1998 -

          Technical details
          bar material dia. 12 - 42 mm︱bar length 3200 mm︱feed speeds 220 mm/sec︱return speed 440 mm/sec︱feed power bis 400 Nm︱compressed air max. 6 bar︱filling capacity 22 Stangen x ø 12 mm︱filling capacity 13 Stangen x ø 20 mm︱filling capacity 7 Stangen x ø 42 mm︱hexagon material bis SW 27 mm︱square material bis SW 20 mm︱total power requirement 0,75 kW︱weight of the machine ca. 0,83 t︱dimensions of machine L x W x H 5,06 x 0,85 x 1,275 m︱
          = bar loading magazine, compressed air controlled
            bar material dia. 12 - 42 mm
            bar length 3200 mm
            feed speeds 220 mm/sec
            return speed 440 mm/sec
            feed power bis 400 Nm
            compressed air max. 6 bar
            filling capacity 22 Stangen x ø 12 mm
            filling capacity 13 Stangen x ø 20 mm
            filling capacity 7 Stangen x ø 42 mm
            hexagon material bis SW 27 mm
            square material bis SW 20 mm
            total power requirement 0,75 kW
            weight of the machine ca. 0,83 t
            dimensions of machine L x W x H 5,06 x 0,85 x 1,275 m
            Description :
            = bar loading magazine, compressed air controlled


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier HYDROBAR LNS - THB-42-2,4


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-002243 · Bar Stock Carrier

          HYDROBAR - LNS - THB-42-2,4 - - 1996 -

          Technical details
          diameter 42 mm︱length 1500 mm︱voltage 380 V / 50 Hz︱total power requirement 1,1 kW︱weight of the machine ca. 0.4 t︱dimensions of the machine ca. m︱
          Rod guidance pipe, diameter 42 x 2400 mm length, 2 columns, 1 hydraulic aggregate,
            diameter 42 mm
            length 1500 mm
            voltage 380 V / 50 Hz
            total power requirement 1,1 kW
            weight of the machine ca. 0.4 t
            Description :
            Rod guidance pipe, diameter 42 x 2400 mm length,
            2 columns, 1 hydraulic aggregate,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier TRAUB 45/26


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00388 · Bar Stock Carrier

          TRAUB - 45/26 - - 1984/96 -

          Technical details
          diameter 45 mm︱length 4400 mm︱total power requirement 1,0 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 5 x 0,4 x 1,2 m︱
            diameter 45 mm
            length 4400 mm
            total power requirement 1,0 kW
            weight of the machine ca. 1,2 t
            dimensions of the machine ca. 5 x 0,4 x 1,2 m


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact

          Clamping Table

          used Other accessories for machine tools Clamping Table EXCELLO 1000x1000mm


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-M01228 · Clamping Table

          EXCELLO - 1000x1000mm - - unbekannt -

          Technical details
          table length 1000 mm︱table width 1000 mm︱table load / t︱weight 1100 kg︱table height 100 mm︱
            table length 1000 mm
            table width 1000 mm
            table load / t
            weight 1100 kg
            table height 100 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table UNBEKANNT 600x430x300mm


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-M01598 · Clamping Table

          UNBEKANNT - 600x430x300mm - - unbekannt -

          Technical details
          table length 630 mm︱table width 430 mm︱table load / t︱
            table length 630 mm
            table width 430 mm
            table load / t


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table MAX PIANCK 740x530x520mm - 90° Neigbar


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1991 · Clamping Table

          MAX PIANCK - 740x530x520mm - 90° Neigbar - - unbekannt -

          Technical details
          length 740 mm︱width 530 mm︱height 520 mm︱
            length 740 mm
            width 530 mm
            height 520 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table UNBEKANNT


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-5441 · Clamping Table

          UNBEKANNT - - - unbekannt -

          Technical details
          table length 600 mm︱table width 300 mm︱T-slots 5 x 14 mm︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 680 x 360 x 200 mm︱
            table length 600 mm
            table width 300 mm
            T-slots 5 x 14 mm
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 680 x 360 x 200 mm


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table UNBEKANNT 765x555x490mm - Neigbar


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1992 · Clamping Table

          UNBEKANNT - 765x555x490mm - Neigbar - - unbekannt -

          Technical details
          length 765 mm︱width 555 mm︱height 490 mm︱
            length 765 mm
            width 555 mm
            height 490 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table UNBEKANNT Maschinentisch


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1995 · Clamping Table

          UNBEKANNT - Maschinentisch - - unbekannt -

          Technical details
          table length 1600 mm︱table width 1250 mm︱table load t︱height 250 mm︱weight of the machine ca. 2500 t︱
            table length 1600 mm
            table width 1250 mm
            height 250 mm
            weight of the machine ca. 2500 t


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table UNBEKANNT Maschinentisch 1000x475x145mm


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3838 · Clamping Table

          UNBEKANNT - Maschinentisch 1000x475x145mm - - unbekannt -

          Technical details
          table length 1000 mm︱table width 475 mm︱table height 145 mm︱
            table length 1000 mm
            table width 475 mm
            table height 145 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table UNBEKANNT Maschinentisch


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3842 · Clamping Table

          UNBEKANNT - Maschinentisch - - unbekannt -

          Technical details
          table length 1000 mm︱table width 475 mm︱table height 145 mm︱
            table length 1000 mm
            table width 475 mm
            table height 145 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-Z00732 · Clamping Table

          - - - 2014 -

          Technical details
          table length 6000 mm︱table width 1000 mm︱height 900 mm︱T-slot - width 28 mm︱T-slot - distance 150 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            table length 6000 mm
            table width 1000 mm
            height 900 mm
            T-slot - width 28 mm
            T-slot - distance 150 mm


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-Z00733 · Clamping Table

          - - - 2014 -

          Technical details
          table length 1000 mm︱table width 500 mm︱height 900 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            table length 1000 mm
            table width 500 mm
            height 900 mm


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table AUFSPANNTISCH Ø600


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20506 · Clamping Table

          AUFSPANNTISCH - Ø600 - - 1992 -

          Technical details
          table length 1 mm︱table width 1 mm︱table load 1 t︱
          round table plate Ø 600 mm with 3 t-slots (18/30), Slot-distance: 160 mm, with misc. clamping plates and clamping pot!
            table length 1 mm
            table width 1 mm
            table load 1 t
            Description :
            round table plate Ø 600 mm with 3 t-slots (18/30), Slot-distance: 160 mm, with misc. clamping plates and clamping pot!


        • SK Maschinen-Service GmbH
        • Tackweg 4
        • 47918 Tönisvorst
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table KRUPS A2-2,5


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04422 · Clamping Table

          KRUPS - A2-2,5 - - 1988 -

          Technical details
          weight 6000 kg︱length 2500 mm︱width 2000 mm︱height 389 mm︱
            weight 6000 kg
            length 2500 mm
            width 2000 mm
            height 389 mm


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table PEISELER Tfh 520/630 Teiltisch


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-Z00465 · Clamping Table

          PEISELER - Tfh 520/630 Teiltisch - - 1980 -

          Technical details
          table length 630 mm︱table width 630 mm︱table load . t︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            table length 630 mm
            table width 630 mm
            table load . t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table Krups A16


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04267 · Clamping Table

          Krups - A16 - - 1980 -

          Technical details
          table length 1.600 mm︱table width 1.600 mm︱table load 3 t︱plate height 1.000 mm︱weight of the machine ca. 3 t︱
            table length 1.600 mm
            table width 1.600 mm
            table load 3 t
            plate height 1.000 mm
            weight of the machine ca. 3 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Clamping Table WMT FL-WB 90/60


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69123 · Clamping Table

          WMT - FL-WB 90/60 - - -Neu- -

          Technical details
          table length 900 mm︱table width 600 mm︱table height 700 mm︱groove width mm︱ mm︱weight of the machine ca. 90 Kg︱dimensions 0,9 x 0,6 x 0,7 m︱
            table length 900 mm
            table width 600 mm
            table height 700 mm
            weight of the machine ca. 90 Kg
            dimensions 0,9 x 0,6 x 0,7 m


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

          TOP Manufacturer:

          TRAUB - BREUNING IRCO - FMB - LNS - IRCO - HYDROBAR - SYMCO -